Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 741/1027 | < Previous Page | 737 738 739 740 741 742 743 744 745 746 747 748  | Next Page >

• Debugging .NET code called from X++ code in AX 2012

  - by ssmantha

  A very intriguing issue came to me to debug .Net code called from X++ code in AX 2012. This was indeed a challenge to be nailed down. Luckily the tools and some concepts helped me to achieve this task. Here it goes... We need to do a seamless debugging from AX debugger to Visual Studio back and forth. To enable this we need to first see if the dll to be debug is present in GAC then we might need to uninstall it from it due to the order of preference .NET loads the assemblies. The assemblies are first loaded from GAC and then the runtime checks for Public and Private Assemblies. Since the assembly in GAC is always compiled with runtime optimizations it is difficult to debug. We need to unhook this assembly from GAC and then move further relying on >NET assembly loading patterns. Step 1: Remove the target assembly to debug from GAC. Before that stop all the AOS servers and close all the instances of programs which rely on AOT e.g. all clients and even visual studio now. Step 2: Build your sample code which is present in AOT in debug mode and get the dll file along with PDB files. Step 3: Place these files in the Server\..\Bin and Client\bin directories of AX installation. Step 4: Configure Visual Studio: Step 4.1: Configure Debugging Options. In Visual Studio Go to Debug -> Options and Settings -> Debug node -> General sub node and disable “Enable Just My Code (managed)” Step 4.2: Specify the symbol loading directory options. Specify the locations for Client bin and server bin directories of the installation, remember to specify the correct instance of Server bin directory corresponding to your AOS. Step 4.3: Configure the project for debugging Step 5: Ready to go place your breakpoints in X++ and in .Net wherever necessary before this process... Run the Visual studio project and it will invoke the AX client with your breakpoint hitting X++ code.. and when you do a step-in using F11 the Visual studio debugger will be active and from here onwards you would be able to debug the complete flow. Debugging in seamless manner across debuggers is really very good feature and mostly underutilized, but by doing so we can have improved troubleshooting and saves a hell lot of time.. Stay tuned for more in Advanced Debugging..

  Read the article

• Silverlight Cream for May 12, 2010 -- #860

  - by Dave Campbell

  In this Issue: Miroslav Miroslavov(-2-), Mike Snow(-2-, -3-), Paul Sheriff, Fadi Abdelqader, Jeremy Likness, Marlon Grech, and Victor Gaudioso. Shoutouts: Andy Beaulieu has a cool WP7 game up and is looking for opinions/comments: Droppy Pop: A Windows Phone 7 Game Karl Shifflett has code and video tutorials up for the app he wrote for the WPF LOB tour he just did: Stuff – WPF Line of Business Using MVVM Video Tutorial From SilverlightCream.com: Flipping panels I had missed this 3rd part of the CompleteIT explanation. In this post Miroslav Miroslavov describes the page flipping they're doing. Great explanation and all the code included. Flying objects against you The 4th part of the CompleteIT explanation is blogged by Miroslav Miroslavov where he is discussing the screen elements 'flying toward' the user. Silverlight Tip of the Day #17 – Double Click Mike Snow's Tip of the Day 17 is showing how to implement mouse double-clicks either for an individual control or for an entire app. Silverlight Tip of the Day #18 – Elastic Scrolling In Mike Snow's Tip of the Day 18, he's talking about and showing some 'elastic' scrolling in his image viewer application. He's asking for opinions and suggestions. Silverlight Tip of the Day #19 – Using Bing Maps in Silverlight Mike Snow's Tips are getting more elaborate :) ... Number 19 is about using the BingMap control in your Silverlight app. Control to Control Binding in WPF/Silverlight Paul Sheriff demonstrates control to control binding... saving a bunch of code behind in the process. Project included. Your First Step to the Silverlight Voice/Video Chatting Client/Server Fadi Abdelqader has a post up at CodeProject using the WebCam and Mic features of Silverlight 4 to setup a voice & video chatting app. MVVM Coding by Convention (Convention over Configuration) Jeremy Likness discusses Convention over Configuration and gives up some good MVVM nuggets along the way... check out his nice long post and grab the source for the project too... and also check out the external links he has in there. MEFedMVVM changes >> from cool to cooler Marlon Grech has refactored MEFedMVVM, and in addition is working with other MVVM framework folks to use some of the same MEF techniques in theirs... code on CodePlex New Silverlight Video Tutorial: How to Create a Silverlight Paging System to Load new Pages In Victor Gaudioso's latest video tutorial he builds a ContentHolder UserControl that will load any page on demand into your MainPage.xaml Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Silverlight Cream for December 08, 2010 -- #1005

  - by Dave Campbell

  In this Issue: Peter Kuhn, David Anson, Jesse Liberty, Mike Taulty(-2-, -3-), Kunal Chowdhury, Jeremy Likness, Martin Krüger, Beth Massi(-2-, -3-)/ Above the Fold: Silverlight: "Rebuilding the PDC 2010 Silverlight Application (Part 1)" Mike Taulty WP7: "WP7: Glossy text block custom control" Martin Krüger Lightswitch: "How to Create a Screen with Multiple Search Parameters in LightSwitch" Beth Massi From SilverlightCream.com: Requirements of and pitfalls in Windows Phone 7 serialization Peter Kuhn discusses Data Contract Serializer issuses on WP7 and how to work around them. Managed implementation of CRC32 and MD5 algorithms updated; new release of ComputeFileHashes for Silverlight, WPF, and the command-line! David Anson ties up some loose ends from a prior post on hash functions, and updates his CRC32 and MD5 algorithms. Windows Phone From Scratch #9 – Visual State Jesse Liberty's latest Windows Phone from Scratch tutorial up... and is on the Visual State... he extends a Button and codes up the State Transitions. Rebuilding the PDC 2010 Silverlight Application (Part 1) Mike Taulty has taken the time to rebuild the PDC2010 Silverlight App that folks wanted the source for... and he's taking multiple posts to explain the heck out of it. This first one is mostly infrastructure. Rebuilding the PDC 2010 Silverlight Application (Part 2) In the 2nd post of the series, Mike Taulty is handling the In/Out of Browser business because he eventually is going to be going OOB. Rebuilding the PDC 2010 Silverlight Application (Part 3) Part 3 finds Mike Taulty delving into WCF Data Services and getting some data on the screen. Paginating Records in Silverlight DataGrid using PagedCollectionView Kunal Chowdhury continues with his investigation of the PagedCollectionView with this post on Pagination of your data. Old School Silverlight Effects If you haven't seen Jeremy Likness' 'Old School' Effects page yet, go just for the entertainment... you'll find yourself hanging around for the code :) WP7: Glossy text block custom control Martin Krüger's latest post is a very cool custom control for WP7 that displays Glossy text... it ain't Metro, but it looks pretty nice... some of it almost like etched text. How to Create a Screen with Multiple Search Parameters in LightSwitch Looks like Beth Massi got a few Lightswitch posts in while I wasn't looking. First up is this one on a multiple-parameter search screen. Adding Static Images and Logos to LightSwitch Applications In the 2nd post, Beth Massi shows how to add your own static images and logos to Lightswitch apps... in response to reader questions. Getting the Most out of LightSwitch Summary Properties In her latest post, Beth Massi explains what Summary Properties are in Lightswitch and how to use them to get the best results for your users. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• It's called College.

  - by jeffreyabecker

  Today I saw yet another 'GUID vs int as your primary key' article. Like most of the ones I've read this was filled with technical misrepresentations and out-right fallices. Chef's famous line that "There's a time and a place for everything children" applies here. GUIDs have distinct advantages and disadvantages which should be considered when choosing a data type for the primary key. Fallacy 1: "Its easier" An integer data type(tinyint, smallint, int, bigint) is a better artifical key than a GUID because its easier to remember. I'm a firm believer that your artifical primary keys should be opaque gibberish. PK's are an implementation detail which should never be exposed to the user or relied on for business logic. If you want things to come back in an order, add and ORDER BY clause and SortOrder fields. If you want a human-usable look-up add a business key with a unique constraint. If you want to know what order things were inserted into a table add a timestamp. Fallacy 2: "Size Matters" For many applications, the size of the artifical primary key is going to be irrelevant. The particular article which kicked this post off stated repeatedly that joining against an int has better performance than joining against a GUID. In computer science the performance of your algorithm is always a function of the number of data points. This still holds true for databases. Unless your table is very large, the performance difference between an int and a guid probably isnt going to be mesurable let alone noticeable. My personal experience is that the performance becomes an issue when you start having billions of rows in the table. At this point, you should probably start looking to move from int to bigint so the effective space/performance gain isnt as much as you'd think. GUID Advantages: Insert-ability / Mergeability: You can reliably insert guids into tables without key collisions. Database Independence: Saving entities to the database often requires knowing ids. With identity based ids the id must be selected back after every insert. GUIDs can be generated application-side allowing much faster inserts. GUID Disadvantages: Generatability: You can calculate the next id for an integer pk pretty easily in your head but will need a program to generate GUIDs. Solution: "Select top 100 newid() from sysobjects" Fragmentation: most GUID generation algorithms generate pseudo random GUIDs. This can cause inserts into the middle of your clustered index. Solutions: add a default of newsequentialid() or use GuidComb in NHibernate.

  Read the article

• Where would my different development rhythm be suitable for the work?

  - by DarenW

  Over the years I have worked on many projects, with some successful and a great benefit to the company, and some total failures with me getting fired or otherwise leaving. What is the difference? Naturally I prefer the former and wish to avoid the latter, so I'm pondering this issue. The key seems to be that my personal approach differs from the norm. I write code first, letting it be all spaghetti and chaos, using whatever tools "fit my hand" that I'm fluent in. I try to organize it, then give up and start over with a better design. I go through cycles, from thinking-design to coding-testing. This may seem to be the same as any other development process, Agile or whatever, cycling between design and coding, but there does seem to be a subtle difference: The methods (ideally) followed by most teams goes design, code; design, code; ... while I'm going code, design; code, design; (if that makes any sense.) Music analogy: some types of music have a strong downbeat while others have prominent syncopation. In practice, I just can't think in terms of UML, specifications and so on, but grok things only by attempting to code and debug and refactor ad-hoc. I need the grounding provided by coding in order to think constructively, then to offer any opinions, advice or solutions to the team and get real work done. In positions where I can initially hack up cowboy code without constraints of tool or language choices, I easily gain a "feel" for the data, requirements etc and eventually do good work. In formalized positions where paperwork and pure "design" comes first and only later any coding (even for small proof-of-concept projects), I am lost at sea and drown. Therefore, I'd like to know how to either 1) change my rhythm to match the more formalized methodology-oriented team ways of doing things, or 2) find positions at organizations where my sense of development rhythm is perfect for the work. It's probably unrealistic for a person to change their fundamental approach to things. So option 2) is preferred. So where I can I find such positions? How common is my approach and where is it seen as viable but different, and not dismissed as undisciplined or cowboy coder ways?

  Read the article

• The Dispose Pattern (and FxCop warnings)

  - by Scott Dorman

  [This is actually a response to Bill’s blog post, but since it isn’t possible to leave this as a comment on his blog it’s a post here.] There are many different ways to implement the Dispose pattern correctly. Some are (in my opinion) better than others. In Bill’s blog post he presents a particular pattern, which is an excerpt from his book (Effective C#). The issue centers around the fact that a reader took the code sample presented in the book and ran FxCop (Code Analysis) on it, which generated a warning: “Ensure that base.Dispose() is always called.” The “lesson learned” that Bill presents is that “tools are there to help us, not control us.” While I completely agree with the belief that tools are there to help us, I think it’s important to understand why FxCop is raising this particular warning. The code presented in Bill’s book looks like: // Have its own disposed flag.private bool disposed = false;protected override void Dispose(bool isDisposing){ // Don't dispose more than once. if (disposed) return; if (isDisposing) { // TODO: free managed resources here. } // TODO: free unmanaged resources here. // Let the base class free its resources. // Base class is responsible for calling // GC.SuppressFinalize( ) base.Dispose(isDisposing); // Set derived class disposed flag: disposed = true;} This code does follow all of the guidelines for implementing the Dispose pattern. In this case, it’s presumably part of a larger example showing how to implement the pattern as part of a base class. The reason FxCop is warning you about this code is the first if statement in the Dispose method, which will cause the method to exit if disposed is true. The problem here is that there is the possibility that if the disposed flag is true, the call to base.Dispose() will never be executed. As Bill points out, it is possible for some other code elsewhere in the class to set this flag. He states that this is an “unlikely occurrence.” While that is probably true, it can be a potentially dangerous assumption to make and is one that can be easily corrected. By changing the code slightly you can remove this assumption and correct the FxCop violation. private bool disposed = false;protected override void Dispose(bool disposing){ if (!disposed) { if (disposing) { // Dispose managed resources. } // Dispose unmanaged resources. disposed = true; } base.Dispose(disposing);} Using this implementation allows the call to base.Dispose() to always occur, which ensures that the the disposal chain is always properly followed. Technorati Tags: .NET,C#,Dispose Pattern

  Read the article

• IE9 Loses Some CSS After Particular Form Submit [migrated]

  - by Asherion

  The site I am editing has a search form. For the record, there are several other forms on the site, contact and the like. This is the only one with an issue. Upon submission of the form, SOME of the styling is lost in IE9 (possibly other versions of IE, haven't tested that yet). Primarily, the margins and colors set in html and body appear to have been lost. Menus, banner, text, etc all appear to retain styles. All styles are on one sheet, that are used here... Any helpful advice? Here is the contents of the search page and the php used to check for the form, if that helps, and the css that I think is lost. THE HTML: <div id="search"> <br /> <div style="float:right;font-size:.8em;"> <form name="form_sidesearch" action="search.html" method="post"> <input type="hidden" name="action" value="search" /> <input type="text" name="search_value" value="<?php echo $systems_primary->search_value ?>" /> <input type="submit" name="submit_search" value="Search Website" /> </form> <br /> </div> </div> <?php echo stripslashes($search_results); THE PHP: <?php // -- Begin Search -------------------------------------------------------------------------------------- if($_REQUEST["action"] === "search") { if(strlen($_REQUEST["pg"]) <= 0) { $_REQUEST["pg"] = 1; } $search_results = $systems_primary->search_website("index",urldecode($_REQUEST["search_value"]),"<div class=\"listing ui-corner-all\"><a href=\"{ENTRY_URL}\" title=\"{ENTRY_TITLE}\" class=\"listing_title\">{ENTRY_TITLE}</a>{ENTRY_CONTENT} <a href=\"{ENTRY_URL}\" title=\"{ENTRY_TITLE}\" style=\"font-size:.8em;\">...read more</a></div><br /><br />",345,"all",10,$_REQUEST["pg"]); } // -- End Search ---------------------------------------------------------------------------------------- ?> THE LOST CSS (could be more): html { background-color:#F6E6C8; font-size:16px; font:Helvetica; } body { width:1027px; margin:0 auto; background-color:#ffffff; font: arial, times new roman, sans-serif; }

  Read the article

• Star rating not showing in rich snippets

  - by Danny R

  We've recently been doing a lot of work on our site's SEO (www.betterthanreviews.com). We recently did a push to update the rich snippets breadcrumb, meta description, and star rating. After giving Google some time to index the site, it has updated the breadcrumbs and meta descriptions for our review pages, but the stars are still not showing. This is currently how it appears on a Google search (link to the actual page: http://www.betterthanreviews.com/home-security/livewatch): This is what the Rich Snippets is supposed to look like, and how it appears in Google's testing tool: More context: As seen in our html, we are using schema.org language. We initially were using schema.org/Corporation for the site, but we now have the page labeled as schema.org/HomeAndConstructionBusiness because Google will not show star ratings for the Corporation language. However, in our Webmaster Tools, the Structured Data is still showing the Corporation language, which could be a potential issue. Here is a look at some of the coding that we used. But it can be looked at closer by inspecting the element: <div class="aggregate-rating" itemprop="aggregateRating" itemscope="" itemtype="http://schema.org/AggregateRating"> <div class="review row_fluid" itemprop="review" itemscope="" itemtype="http://schema.org/Review"> <div class="row_fluid rating" itemprop="reviewRating" itemscope="" itemtype="http://schema.org/Rating"> <meta content="4.5" itemprop="ratingValue" title="4.5 out of 5 stars" class="star-rating-readonly"> <meta content="2013-12-05" itemprop="datePublished"> <p class="review-headline" itemprop="headline">Way better than my previous system</p> <div> <p class="reviewer" itemprop="author">Scott H. </p> <span class="bullet">•</span> <p class="created_at">2 months ago</p> <p class="content" itemprop="description">I love it! The experience I have had so far is extremely positive. I had another alarm system before and I didn't like it but this one is really nice. I am telling everybody about it.</p> </div> </div> Any suggestions for how to fix this?

  Read the article

• Access-based Enumeration (December 04, 2009)

  - by user12612012

  Access-based Enumeration (ABE) is another recent addition to the Solaris CIFS Service - delivered into snv_124.  Designed to be compatible with Windows ABE, which was introduced in Windows Server 2003 SP1, this feature filters directory content based on the user browsing the directory.  Each user can only see the files and directories to which they have access.  This can be useful to implement an out-of-sight, out-of-mind policy or simply to reduce the number of files presented to each user - to make it easier to find files in directories containing a large number of files. ABE is managed on a per share basis by a new boolean share property called, as you might imagine, abe, which is described insharemgr(1M).  When set to true, ABE filtering is enabled on the share and directory entries to which the user has no access will be omitted from directory listings returned to the client.  When set to false or not defined, ABE filtering will not be performed on the share.  The abe property is not defined by default.Administration is straightforward, for example: # zfs sharesmb=abe=true,name=jane tank/home/jane# sharemgr show -vp    zfs       zfs/tank/home/jane nfs=() smb=()          jane=/export/home/jane     smb=(abe="true") ABE is also supported via sharemgr(1M) and on smbautohome(4) shares. Note that even though a file is visible in a share, with ABE enabled, it doesn't automatically mean that the user will always be able to open the file.  If a user has read attribute access to a file ABE will show the it but access will be denied if this user tries to open the file for reading or writing. We considered supporting ABE on NFS shares, as suggested by the name of PSARC/2009/375, but we ran into problems due to NFS client readdir caching.  NFS clients maintain a common directory entry cache for all users, which not only defeats the intent of ABE but can lead to very confusing results.  If multiple users are looking at the content of a directory with ABE enabled, the entries that get cached will depend on who looks at the directory first.  Subsequent users may see files that ABE on the server would have filtered out or files may be missing because they were filtered out for the original user. Although this issue can be resolved by disabling the NFS client readdir cache, this was deemed to be an unsuitable solution because it would create a dependency between a server share property and the configuration on all NFS clients, and there was the potential for differences in behavior across the various NFS clients.  It just seemed to add unnecessary administration complexity so we pulled it out. References for more information PSARC/2009/246 ZFS support for Access Based Enumeration PSARC/2009/375 ABE share property for NFS and SMB 6802734 Support for Access Based Enumeration 6802736 SMB share support for Access Based Enumeration Windows Access-based Enumeration

  Read the article

• SQL – Contest to Get The Date – Win USD 50 Amazon Gift Cards and Cool Gift

  - by Pinal Dave

  If you are a regular reader of this blog – you will find no issue at all in resolving this puzzle. This contest is based on my experience with NuoDB. If you are not familiar with NuoDB, here are few pointers for you. Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB Quick Start with Admin Sections of NuoDB – Manage NuoDB Database Quick Start with Explorer Sections of NuoDB – Query NuoDB Database In today’s contest you have to answer following questions: Q 1: Precision of NOW() What is the precision of the NuoDB’s NOW() function, which returns current date time? Hint: Run following script on NuoDB Console Explorer section: SELECT NOW() AS CurrentTime FROM dual; Here is the image. I have masked the area where the time precision is displayed. Q 2: Executing Date and Time Script When I execute following script - SELECT 'today' AS Today, 'tomorrow' AS Tomorrow, 'yesterday' AS Yesterday FROM dual; I will get the following result:   NOW – What will be the answer when we execute following script? and WHY? SELECT CAST('today' AS DATE) AS Today, CAST('tomorrow' AS DATE) AS Tomorrow, CAST('yesterday'AS DATE) AS Yesterday FROM dual; HINT: Install NuoDB (it takes 90 seconds). Prizes: 2 Amazon Gifts 2 Limited Edition Hoodies (US resident only)   Rules: Please leave an answer in the comments section below. You must answer both the questions together in a single comment. US resident who wants to qualify to win NuoDB apparel please mention your country in the comment. You can resubmit your answer multiple times, the latest entry will be considered valid. Last day to participate in the puzzle is June 24, 2013. All valid answer will be kept hidden till June 24, 2013. The winner will be announced on June 25, 2013. Two Winners will get USD 25 worth Amazon Gift Card. (Total Value = 25 x 2 = 50 USD) The winner will be selected using a random algorithm from all the valid answers. Anybody with a valid email address can take part in the contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• SQL SERVER – Storing 64-bit Unsigned Integer Value in Database

  - by Pinal Dave

  Here is a very interesting question I received in an email just another day. Some questions just are so good that it makes me wonder how come I have not faced it first hand. Anyway here is the question - “Pinal, I am migrating my database from MySQL to SQL Server and I have faced unique situation. I have been using Unsigned 64-bit integer in MySQL but when I try to migrate that column to SQL Server, I am facing an issue as there is no datatype which I find appropriate for my column. It is now too late to change the datatype and I need immediate solution. One chain of thought was to change the data type of the column from Unsigned 64-bit (BIGINT) to VARCHAR(n) but that will just change the data type for me such that I will face quite a lot of performance related issues in future. In SQL Server we also have the BIGINT data type but that is Signed 64-bit datatype. BIGINT datatype in SQL Server have range of -2^63 (-9,223,372,036,854,775,808) to 2^63-1 (9,223,372,036,854,775,807). However, my digit is much larger than this number. Is there anyway, I can store my big 64-bit Unsigned Integer without loosing much of the performance of by converting it to VARCHAR.” Very interesting question, for the sake of the argument, we can ask user that there should be no need of such a big number or if you are taking about identity column I really doubt that if your table will grow beyond this table. Here the real question which I found interesting was how to store 64-bit unsigned integer value in SQL Server without converting it to String data type. After thinking a bit, I found a fairly simple answer. I can use NUMERIC data type. I can use NUMERIC(20) datatype for 64-bit unsigned integer value, NUMERIC(10) datatype for 32-bit unsigned integer value and NUMERIC(5) datatype for 16-bit unsigned integer value. Numeric datatype supports 38 maximum of 38 precision. Now here is another thing to keep in mind. Using NUMERIC datatype will indeed accept the 64-bit unsigned integer but in future if you try to enter negative value, it will also allow the same. Hence, you will need to put any additional constraint over column to only accept positive integer there. Here is another big concern, SQL Server will store the number as numeric and will treat that as a positive integer for all the practical purpose. You will have to write in your application logic to interpret that as a 64-bit Unsigned Integer. On another side if you are using unsigned integers in your application, there are good chance that you already have logic taking care of the same. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Datatype

  Read the article

• XNA Notes 001

  - by George Clingerman

  Just a quick recap of things I noticed going on in or around the XNA community this past week. I’m sure there’s a lot I missed (it’s a pretty big community with lots of different parts to it) but these where the things I caught that I thought were pretty cool. The XNA Team Michael Klucher gave a list of books every gamer should read. http://twitter.com/#!/mklucher/status/22313041135673344 Shawn Hargreaves posted Nelxon Studio posting about a cheatsheet for converting 3.1 to 4.0 http://blogs.msdn.com/b/shawnhar/archive/2011/01/04/xna-3-1-to-4-0-cheat-sheet.aspx?utm_source=twitterfeed&utm_medium=twitter XNA Game Studio won the Frontline award for Programming Tool by GameDev magazine! Congrats to the XNA team! http://www.gdmag.com/homepage.htm XNA MVPs In January several MVPs were up for re-election, Jim Perry, Andy ‘The ZMan’ Dunn, Glenn Wilson and myself were all re-award a Microsoft MVP award for their contributions to the XNA/DirectX communities. https://mvp.support.microsoft.com/communities/mvp.aspx?product=1&competency=XNA%2fDirectX A movement to get Michael McLaughlin an MVP award has started and you can join in too! http://twitter.com/#!/theBigDaddio/status/22744458621620224 http://www.xnadevelopment.com/MVP/MichaelMcLaughlinMVP.txt Don’t forget you can nominate ANYONE for a MVP award, that’s how they work. https://mvp.support.microsoft.com/gp/mvpbecoming  XNA Developers James Silva of Ska Studios hit 9,200 sales of ZP2KX and recommends you listen to Infected Mushroom. http://twitter.com/#!/Jamezila/status/22538865357094912 http://en.wikipedia.org/wiki/Infected_Mushroom Noogy creator of the upcoming XBLA title Dust an Elysian tail posts some details into his art creation. http://noogy.com/image/statue/statue.html Xbox LIVE Indie Game News Microsoft posts acknowledging there was an issue with the sales data that has been addressed and apologized for not posting about it sooner. http://forums.create.msdn.com/forums/p/71347/436154.aspx#436154 Winter Uprising sales still chugging along and being updated by Xalterax (by those developers willing to actually share sales numbers. Thanks for sharing guys, much appreciated!) http://forums.create.msdn.com/forums/t/70147.aspx Don’t forget about Dream Build Play coming up in February! http://www.dreambuildplay.com/Main/Home.aspx The Best Xbox LIVE Indie Games December Edition comes out on NeoGaf http://www.neogaf.com/forum/showthread.php?t=414485 The Greatest XBox LIVE Indie Games of 2010 on DealSpwn – Congrats to DrMistry and MStarGames for his #1 spot with his massive XBLIG Space Pirates From Tomorrow! http://www.dealspwn.com/xbligoty-2010/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Dealspwn+%28Dealspwn%29 XNA Game Development The future of XACT and WP7 has finally been confirmed and we finally know what our options are for looping audio seamlessly on WP7. http://forums.create.msdn.com/forums/p/61826/436639.aspx#436639  Super Mario 3 Design Notes is an interesting read for XBLIG developers, giving some insight to the training that natural occurs for players as they start playing the game. Good things for XBLIG developers to think about. http://www.significant-bits.com/super-mario-bros-3-level-design-lessons

  Read the article

• TDD - Red-Light-Green_Light:: A critical view

  - by Renso

  Subject: The concept of red-light-green-light for TDD/BDD style testing has been around since the dawn of time (well almost). Having written thousands of tests using this approach I find myself questioning the validity of the principle The issue: False positive or a valid test strategy that can be trusted? A critical view: I agree that the red-green-light concept has some validity, but who has ever written 2000 tests for a system that goes through a ton of chnages due to the organic nature fo the application and does not have to change, delete or restructure their existing tests? If you asnwer to the latter question is" "Yes I had a situation(s) where I had to refactor my code and it caused me to have to rewrite/change/delete my existing tests", read on, else press CTRL+ALT+Del :-) Once a test has been written, failed the test (red light), and then you comlpete your code and now get the green light for the last test, the test for that functionality is now in green light mode. It can never return to red light again as long as the test exists, even if the test itself is not changed, and only the code it tests is changed to fail the test. Why you ask? because the reason for the initial red-light when you created the test is not guaranteed to have triggered the initial red-light result for the same reasons it is now failing after a code change has been made. Furthermore, when the same test is changed to compile correctly in case of a compile-breaking code change, the green-light once again has been invalidated. Why? Because there is no guarantee that the test code fix is in the same green-light state as it was when it first ran successfully. To make matters worse, if you fix a compile-breaking test without going through the red-light-green-light test process, your test fix is essentially useless and very dangerous as it now provides you with a false-positive at best. Thinking your code has passed all tests and that it works correctly is far worse than not having any tests at all, well at least for that part of the system that the test-code represents. What to do? My recommendation is to delete the tests affected, and re-create them from scratch. I have to agree. Hard to do and justify if it has a significant impact on project deadlines. What do you think?

  Read the article

• Using ext4 in VMware machine

  First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

  Read the article

• ADF Code Guidelines

  - by Chris Muir

  During Oracle Open World 2012 the ADF Product Management team announced a new OTN website, the ADF Architecture Square.  While OOW represents a great opportunity to let customers know about new and exciting developments, the problem with making announcements during OOW however is customers are bombarded with so many messages that it's easy to miss something important. So in this blog post I'd like to highlight as part of the ADF Architecture Square website, one of the initial core offerings is a new document entitled ADF Code Guidelines. Now the title of this document should hopefully make it obvious what the document contains, but what's the purpose of the document, why did Oracle create it? Personally having worked as an ADF consultant before joining Oracle, one thing I noted amongst ADF customers who had successfully deployed production systems, that they all approached software development in a professional and engineered way, and all of these customers had their own guideline documents on ADF best practices, conventions and recommendations.  These documents designed to be consumed by their own staff to ensure ADF applications were "built right", typically sourced their guidelines from their team's own expert learnings, and the huge amount of ADF technical collateral that is publicly available.  Maybe from manuals and whitepapers, presentations and blog posts, some written by Oracle and some written by independent sources. Now this is all good and well for the teams that have gone through this effort, gathering all the information and putting it into structured documents, kudos to them.  But for new customers who want to break into the ADF space, who have project pressures to deliver ADF solutions without necessarily working on assembling best practices, creating such a document is understandably (regrettably?) a low priority.  So in recognising this hurdle, at Oracle we've devised the ADF Code Guidelines.  This document sets out ADF code guidelines, practices and conventions for applications built using ADF Business Components and ADF Faces Rich Client (release 11g and greater).  The guidelines are summarized from a number of Oracle documents and other 3rd party collateral, with the goal of giving developers and development teams a short circuit on producing their own best practices collateral. The document is not a final production, but a living document that will be extended to cover new information as discovered or as the ADF framework changes. Readers are encouraged to discuss the guidelines on the ADF EMG and provide constructive feedback to me (Chris Muir) via the ADF EMG Issue Tracker. We hope you'll find the ADF Code Guidelines useful and look forward to providing updates in the near future. Image courtesy of paytai / FreeDigitalPhotos.net

  Read the article

• Facebook page design is not working in IE8 [closed]

  - by PrateekSaluja

  Hello Experts, We have designed a face book page.It is working fine in all browser including IE7 but it is not working in IE8.We checked then we got if we run our code outside the face book page it works in IE8 but when we put our code into face book page its not working.Here is the css code what we are using for IE8. <!--[if lt IE 8]> <style> .nv_a { width:90px; height:27px; float:left; text-align:center; padding-top:8px; } .nvt_a { width:66px; height:27px; float:left; text-align:center; padding-top:8px; } .nv_a a { width:90px; height:27px; float:left; padding-top:8px; text-align:center; color:#000; display:inline-block; text-decoration:none; background-color:#e0e0e0; border-top:solid 1px #999; border-left:solid 1px #999; border-right:solid 1px #999; border-bottom:solid 1px #999; } .nv_a a:hover { width:90px; height:27px; padding-top:8px; float:left; color:#000; text-align:center; background-color:#ccc; } .nvt_a a { width:66px; height:27px; float:left; padding-top:8px; text-align:center; color:#000; display:inline-block; text-decoration:none; background-color:#e0e0e0; border-top:solid 1px #999; border-left:solid 1px #999; border-right:solid 1px #999; border-bottom:solid 1px #999; border:1px solid red; } Please help us to solve the issue.

  Read the article

• Getting away from a customized Magento 1.4 installation - Magento 1.6, OpenCart, or others?

  - by Phil

  I'm dealing with a Magento 1.4.0.0 Community Edition installation with various undocumented changes to the core (mostly integration with an ERP system), an outdated Sweet Tooth Points & Rewards module and some custom payment providers. It also doubles as a mediocre blogging/CMS system. It has one store each for 3 different languages, with about 40 product categories for a few hundred products. [rant] With no prior experience with any PHP e-commerce systems, I find it very difficult to work with. I attempted to install Magento 1.4.0.0 on my local WAMP dev machine, it installs fine, but the main page or search do not show any products no matter what I do in the backend admin panel. I don't know what's wrong with it, and whatever information I googled is either too old or too new from Magento 1.4. Later I'm given FTP access to the testing server, which neither my manager or I have permission to install XDebug on, as apparantly it runs on the same server as the production server (yikes). Trying to learn how Magento works is torture. I spent a week trying to add some fields into the Onepage Checkout before giving up and went to work on something else. The template system, just like the rest of Magento, is a bloated mishmash of overcomplicated directory structures, weird config xml files and EAV databases. I went into 6 different models and several content blocks in the backend just to change what the front page looks like. With little-to-none helpful and clear documentation (unlike CodeIgniter) and various breaking changes between minor point revisions which makes it hard to find useful information, Magento 1.4 is a developer killer. [/rant] The client is planning to redesign the site and has decided it might as well as move on from this unsustainable, hacky, upgrade-unfriendly, developer-unfriendly mess. Magento 1.4 is starting to show its age, with Magento 1.7 coming soon, the client is considering upgrading to Magento 1.6 or 1.7 if it has improved from 1.4. The customizations done to the current Magento 1.4 installation will have to be redone, and a new license for the Sweet Tooth Points & Rewards module will have to be bought. The client is also open to other e-commerce systems. I've looked at OpenCart and it seems to be quite developer friendly with a fairly simple structure. I found some complaints regarding its performance when the shop has thousands of categories or products, but this is not an issue with the current number of products my client has. It seems to be solid ground for easy customization to bring the rewards system and ERP integration over. What should the client upgrade to in this case?

  Read the article

• Xorg.conf (nvidia) Second Monitor getting settings of first

  - by HennyH

  I've been spending the weekend (and some time before that) trying to set up my Korean QHD270 and Benq G2222HDL monitors with Ubuntu 13.10. With the nouveau drivers install both monitor function perfectly fine. After installing the nvidia drivers the Benq works but the QHD270 does not. Now, after days of struggling I managed to get the QHD270 to work following a mixture of blogs, particularly; this one and learnitwithme. Now, unfortunatly my G2222HDL does not work. I fixed the QHD270 by supplying a custom EDID, my xorg.conf looks like so (excluding keyboard and mouse): Section "ServerLayout" Identifier "Layout0" Screen "Default Screen" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" Option "CustomEDID" "DFP:/etc/X11/edid-shimian.bin" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Now, I tried defining a new Device,Monitor and Screen then in ServerLayout adding Screen "Second Screen" RightOf "Default Screen", but after doing so neither monitor worked. Hoping to fix the issue using a GUI based tool I opened up NVIDIA X Server Settings, which shows my current layout as: It seems that something is being output to the monitor, as suggested by my print screen: Any help would be greatly appreciated. Output of xrandr: Screen 0: minimum 8 x 8, current 5120 x 1440, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ HDMI-0 disconnected (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DVI-D-0 connected 2560x1440+2560+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ DP-1 disconnected (normal left inverted right x axis y axis) And an extract from my log file (perhaps this is relevant?) [ 7.862] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:2:0:0 [ 7.862] (--) NVIDIA(0): CRT-0 [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0) (boot, connected) [ 7.862] (--) NVIDIA(0): DFP-1 [ 7.862] (--) NVIDIA(0): DFP-2 [ 7.862] (--) NVIDIA(0): DFP-3 [ 7.862] (--) NVIDIA(0): DFP-4 [ 7.862] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): Internal Dual Link TMDS [ 7.862] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-4: Internal DisplayPort

  Read the article

• View Link inConsistency

  - by Abhishek Dwivedi

  What is View Link Consistency? When multiple instances (say VO1, VO2, VO3 etc) of an EO-based VO are based on the same underlying EO, a new row created in one of these VO instances (say VO1)can be automatically added (without re-query) to the row sets of the others (VO2, VO3 etc ). This capability is known as the view link consistency. This feature works for any VO for which it is enabled, regardless of whether they are involved in a view link or not. What causes View Link inConsistency? Unless jbo.viewlink.consistent  is disabled for this VO (or globally), or setAssociationConsistent(false) is applied, any of the following can cause View Link inConsistency.  1. setWhereClause 2. Unreferenced secondary EO 3. findByViewCriteria() 4. Using view link accessor row set Why does this happen - View Link inConsistency? Well, there can be one of the following reasons. a. In case of 1 & 2, the view link consistency flag is disabled on that view object. b. As far as 3 is concerned, findByViewCriteria is used to retrieve a new row set to process programmatically without changing the contents of the default row set. In this case, unlike previous cases, the view link consistency flag is not disabled, meaning that the changes in the default row set would be reflected in the new row set.  However, the opposite doesn't hold true. For instance, if a row is deleted from this new row set, the corresponding row in the default row set does not get deleted. In one of my features, which involved deletion of row(s), I resolved the view link inconsistency issue by replacing findByViewCriteria by applyViewCriteria. b. For 4, it's similar to 3 - whenever a view link accessor row set is retrieved, a new row set is created. Now, creating new row set does not mean re-executing the query each time, only creating a new instance of a RowSet object with its default iterator reset to the "slot" before the first row. Also, please note that this new row set always originates from an internally created view object instance, not one you that added to the data model. This internal view object instance is created as needed and added with a system-defined name to the root application module. Anyway, the very reason a distinct, internally-created view object instance is used is to guarantee that it remains unaffected by developer-related changes to their own view objects instances in the data model.

  Read the article

• Oracle Tutor: *** CAUTION to Word .docx Users ***

  - by [email protected]

  Microsoft released a security update KB969604 for Office 2007 (around June 2009) This update causes document variables within Word docx files to be scrambled. This update might still be pushed out via Office 2007 updates DO NOT save files as docx using MS OFFICE 2007 until you apply the MS hotfix # 970942 available here If you are using Windows XP with Office 2003 or Office 2000 and have installed an older Office 2007 compatibility pack, documents saved as docx may also cause the scrambled document variables. Installing the 2007 compatibility pack published on 1/6/2010 (version 4) will prevent the document variables from becoming corrupt. Those on Windows 2000 may not be able to install the latest compatibility pack, or the compatibility pack may not function properly. This situation will hopefully be rectified in the coming months. What is a document variable? Document variables store data inside the document, invisible to the user. The Tutor software uses them when converting the document to HTML and when creating the flowchart, just to name a couple of uses. How will you know if a document's variables are scrambled? The difficulty in diagnosing the issue is that the symptoms can take myriad forms. There isn't a single error message or a single feature that one can point to and say, "test for the problem by doing this." The best clue about the error is seeing any kind of string in an error message that has garbage characters, question marks, xml code snippets, or just nonsense. Such as "Language ?????????????xlr;lwlerkjl could not be found." It is also possible to see the corrupted data in the footers of the Word docs. And, just because the footers look correct does not mean that the document variables are not corrupted. The corruption problem does not occur in every document variable in the document, just some of them. Often it is less than a quarter of them. What is the difference between docx files and doc files? Office 2007 uses Office Open XML formats with .docx and .docm filename extensions. - Docx is an Office Open XML word document. - Docm is a macro enabled Office Open XML document. This means the file structure behind the scenes is quite different from the binary file formats used prior to Office 2007 such as .doc, .dot, .xls, and .ppt. Solution Summary: For Windows XP and Word 2007: Install the hotfix, or save files as *.doc For Windows XP and Word 2000 and 2003: Install the latest compatibility pack or save files as *.doc For Windows 2000 with Word 2000 or 2003, do not use any compatibility pack, save files as *.doc Emily Chorba Principle Product Manager for Oracle Tutor

  Read the article

• Using lookahead assertions in regular expressions

  - by Greg Jackson

  I use regular expressions on a daily basis, as my daily work is 90% in Perl (legacy codebase, but that's a different issue). Despite this, I still find lookahead and lookbehind to be terribly confusing and often unreadable. Right now, if I were to get a code review with a lookahead or lookbehind, I would immediately send it back to see if the problem can be solved by using multiple regular expressions or a different approach. The following are the main reasons I tend not to like them: They can be terribly unreadable. Lookahead assertions, for example, start from the beginning of the string no matter where they are placed. That, among other things, can cause some very "interesting" and non-obvious behaviors. It used to be the case that many languages didn't support lookahead/lookbehind (or supported them as "experimental features"). This isn't the case quite as much, but there's still always the question as to how well it's supported. Quite frankly, they feel like a dirty hack. Regexps often already are, but they can also be quite elegant, and have gained widespread acceptance. I've gotten by without any need for them at all... sometimes I think that they're extraneous. Now, I'll freely admit that especially the last two reasons aren't really good ones, but I felt that I should enumerate what goes through my mind when I see one. I'm more than willing to change my mind about them, but I feel that they violate some of my core tenets of programming, including: Code should be as readable as possible without sacrificing functionality -- this may include doing something in a less efficient, but clearer was as long as the difference is negligible or unimportant to the application as a whole. Code should be maintainable -- if another programmer comes along to fix my code, non-obvious behavior can hide bugs or make functional code appear buggy (see readability) "The right tool for the right job" -- I'm sure you can come up with contrived examples that could use lookahead, but I've never come across something that really needs them in my real-world development work. Is there anything that they're really the best tool for, as opposed to, say, multiple regexps (or, alternatively, are they the best tool for most cases they're used for today). My question is this: Is it good practice to use lookahead/lookbehind in regular expressions, or are they simply a hack that have found their way into modern production code? I'd be perfectly happy to be convinced that I'm wrong about this, and simple examples are useful for examples or illustration, but by themselves, won't be enough to convince me.

  Read the article

• How do I calculate the boundary of the game window after transforming the view?

  - by Cypher

  My Camera class handles zoom, rotation, and of course panning. It's invoked through SpriteBatch.Begin, like so many other XNA 2D camera classes. It calculates the view Matrix like so: public Matrix GetViewMatrix() { return Matrix.Identity * Matrix.CreateTranslation(new Vector3(-this.Spatial.Position, 0.0f)) * Matrix.CreateTranslation(-( this.viewport.Width / 2 ), -( this.viewport.Height / 2 ), 0.0f) * Matrix.CreateRotationZ(this.Rotation) * Matrix.CreateScale(this.Scale, this.Scale, 1.0f) * Matrix.CreateTranslation(this.viewport.Width * 0.5f, this.viewport.Height * 0.5f, 0.0f); } I was having a minor issue with performance, which after doing some profiling, led me to apply a culling feature to my rendering system. It used to, before I implemented the camera's zoom feature, simply grab the camera's boundaries and cull any game objects that did not intersect with the camera. However, after giving the camera the ability to zoom, that no longer works. The reason why is visible in the screenshot below. The navy blue rectangle represents the camera's boundaries when zoomed out all the way (Camera.Scale = 0.5f). So, when zoomed out, game objects are culled before they reach the boundaries of the window. The camera's width and height are determined by the Viewport properties of the same name (maybe this is my mistake? I wasn't expecting the camera to "resize" like this). What I'm trying to calculate is a Rectangle that defines the boundaries of the screen, as indicated by my awesome blue arrows, even after the camera is rotated, scaled, or panned. Here is how I've more recently found out how not to do it: public Rectangle CullingRegion { get { Rectangle region = Rectangle.Empty; Vector2 size = this.Spatial.Size; size *= 1 / this.Scale; Vector2 position = this.Spatial.Position; position = Vector2.Transform(position, this.Inverse); region.X = (int)position.X; region.Y = (int)position.Y; region.Width = (int)size.X; region.Height = (int)size.Y; return region; } } It seems to calculate the right size, but when I render this region, it moves around which will obviously cause problems. It needs to be "static", so to speak. It's also obscenely slow, which causes more of a problem than it solves. What am I missing?

  Read the article

• ray collision with rectangle and floating point accuracy

  - by phq

  I'm trying to solve a problem with a ray bouncing on a box. Actually it is a sphere but for simplicity the box dimensions are expanded by the sphere radius when doing the collision test making the sphere a single ray. It is done by projecting the ray onto all faces of the box and pick the one that is closest. However because I'm using floating point variables I fear that the projected point onto the surface might be interpreted as being below in the next iteration, also I will later allow the sphere to move which might make that scenario more likely. Also the bounce coefficient might be as low as zero, making the sphere continue along the surface. So my naive solution is to project not only forwards but backwards to catch those cases. That is where I got into problems shown in the figure: In the first iteration the first black arrow is calculated and we end up at a point on the surface of the box. In the second iteration the "back projection" hits the other surface making the second black arrow bounce on the wrong surface. If there are several boxes close to each other this has further consequences making the sphere fall through them all. So my main question is how to handle possible floating point accuracy when placing the sphere on the box surface so it does not fall through. In writing this question I got the idea to have a threshold to only accept back projections a certain amount much smaller than the box but larger than the possible accuracy limitation, this would only cause the "false" back projection when the sphere hit the box on an edge which would appear naturally. To clarify my original approach, the arrows shown in the image is not only the path the sphere travels but is also representing a single time step in the simulation. In reality the time step is much smaller about 0.05 of the box size. The path traveled is projected onto possible sides to avoid traveling past a thinner object at higher speeds. In normal situations the floating point accuracy is not an issue but there are two situations where I have the concern. When the new position at the end of the time step is located very close to the surface, very unlikely though. When using a bounce factor of 0, here it happens every time the sphere hit a box. To add some loss of accuracy, the motivation for my concern, is that the sphere and box are in different coordinate systems and thus the sphere location is transformed for every test. This last one is why I'm not willing to stand on luck that one floating point value lying on top of the box always will be interpreted the same. I did not know voronoi regions by name, but looking at it I'm not sure how it would be used in a projection scenario that I'm using here.

  Read the article

• Identify memory leak in Java app

  - by Vincent Ma

  One important advantage of java is programer don't care memory management and GC handle it well. Maybe this is one reason why java is more popular. As Java programer you real dont care it? After you meet Out of memory you will realize it it’s not true. Java GC and memory is big topic you can get some information in here Today just let me show how to identify memory leak quickly. Let quickly review demo java code, it’s one kind of memory leak in our code, using static collection and always add some object. import java.util.ArrayList;import java.util.List; public class MemoryTest { public static void main(String[] args) { new Thread(new MemoryLeak(), "MemoryLeak").start(); }} class MemoryLeak implements Runnable { public static List<Integer> leakList = new ArrayList<Integer>(); public void run() { int num =0; while(true) { try { Thread.sleep(1); } catch (InterruptedException e) { } num++; Integer i = new Integer(num); leakList.add(i); } }} run it with java -verbose:gc -XX:+PrintGCDetails -Xmx60m -XX:MaxPermSize=160m MemoryTest after about some minuts you will get Exception in thread "MemoryLeak" java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOf(Arrays.java:2760) at java.util.Arrays.copyOf(Arrays.java:2734) at java.util.ArrayList.ensureCapacity(ArrayList.java:167) at java.util.ArrayList.add(ArrayList.java:351) at MemoryLeak.run(MemoryTest.java:25) at java.lang.Thread.run(Thread.java:619)Heap def new generation total 18432K, used 3703K [0x045e0000, 0x059e0000, 0x059e0000) eden space 16384K, 22% used [0x045e0000, 0x0497dde0, 0x055e0000) from space 2048K, 0% used [0x055e0000, 0x055e0000, 0x057e0000) to space 2048K, 0% used [0x057e0000, 0x057e0000, 0x059e0000) tenured generation total 40960K, used 40959K [0x059e0000, 0x081e0000, 0x081e0000) the space 40960K, 99% used [0x059e0000, 0x081dfff8, 0x081e0000, 0x081e0000) compacting perm gen total 12288K, used 2083K [0x081e0000, 0x08de0000, 0x10de0000) the space 12288K, 16% used [0x081e0000, 0x083e8c50, 0x083e8e00, 0x08de0000)No shared spaces configured. OK let us quickly identify it using JProfile Download JProfile in here  Run JProfile and attach MemoryTest get largest size of  Objects in Memory View in here is Integer then select Integer and go to Heap Walker. get GC Graph for this object  Then you get detail code raise this issue quickly now.  That is enjoy it.

  Read the article

• SQL SERVER – Get 2 of My Books FREE at Koenig Tech Day – Where Technologies Converge!

  - by pinaldave

  As a regular reader of my blog – you must be aware of that I love to write books and talk about various subjects of my book. The founders of Koenig Solutions are my very old friends, I know them for many years. They have been my biggest supporter of my books. Coming weekend they have a technology event at their Bangalore Location. Every attendee of the technology event will get a set of two books worth Rs. 450 – ‘SQL Server Interview Questions And Answers‘ and ‘SQL Wait Stats Joes 2 Pros‘. I am going to cover a couple of topics of the books and present  as well. I am very confident that every attendee will be having a great time. I will be covering following subjects: SQL Server Tricks and Tips for Blazing Fast Performance Slow Running Queries (SQL) are the most common problem that developers face while working with SQL Server. While it is easy to blame the SQL Server for unsatisfactory performance, however the issue often persists with the way queries have been written, and how SQL Server has been set up. The session will focus on the ways of identifying problems that slow down SQL Servers, and tricks to fix them. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. After the session is over – I will point to what exact location in the book where you can continue for the further learning. I am pretty excited, this is more like book reading but in entire different format. The one day event will cover four technologies in four separate interactive sessions on: Microsoft SQL Server Security VMware/Virtualization ASP.NET MVC Date of the event: Dec 15, 2012 9 AM to 6PM. Location of the event:  Koenig Solutions Ltd. # 47, 4th Block, 100 feet Road, 3rd Floor, Opp to Shanthi Sagar, Koramangala, Bangalore- 560034 Mobile : 09008096122 Office : 080- 41127140 Organizers have informed me that there are very limited seats for this event and technical session based on my book will start at Sharp 9 AM. If you show up late there are chances that you will not get any seats. Registration for the event is a MUST. Please visit this link for further information. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

< Previous Page | 737 738 739 740 741 742 743 744 745 746 747 748  | Next Page >