Search Results

Search found 24734 results on 990 pages for 'floating point conversion'.

Page 743/990 | < Previous Page | 739 740 741 742 743 744 745 746 747 748 749 750 | Next Page >

Fedora 15: em1 recently dissapeared and hostapd no longer serves internet to wirelessly connected devices

- by Daniel K

I have a laptop running hostapd, phpd, and mysql. This laptop uses an Ethernet connection to connect to the internet and acts as a wireless access point for my workplace's wifi devices. After installing some software and reconnecting my Ethernet elsewhere, my "em1" device is no longer present and wirelessly connected devices can no longer reach the internet. The software I recently installed is: pptp, pptpd, and updated some fedora libraries. I have also recently moved my desk and laptop to another location and thus had to reconnect the Ethernet elsewhere. Wifi devices no longer have access to the internet. Wirelessly connected devices are able to successfully log into the laptop, showing full strength, correct SSID, and uses the proper password. However, when I tried to connect to a site like google, the request times out. The device "em1" also no longer appears on my machine. Running: # ifup em1 will give me the following output: ERROR : [/etc/sysconfig/network-scripts/ifup-eth] Device em1 does not seem to be present, delaying initialization. And running: # dhclient em1 has the following output: Cannot find device "em1" When I run # dmesg|grep renamed, I get the following: renamed network interface eth0 to p4p1. I've tried to connect to the internet through p4p1 directly from the laptop and was successful. However, my wireless devices connected to my laptop are not able to connect to the internet. I have uninstalled pptp and pptpd using # yum erase ... but the problem still persists. To install pptp I used: # yum install pptp To install pptpd I did the following: # rpm -Uvh http://poptop.sourceforge.net/yum/stable/fc15/pptp-release-current.noarch.rpm # yum install pptpd To update my fedora libraries I used: # yum check-update # yum update EDIT: Running # route produces the following results: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.11.200.1 0.0.0.0 UG 0 0 0 p4p1 10.11.200.0 * 255.255.252.0 U 0 0 0 p4p1 172.16.100.0 * 255.255.255.0 U 0 0 0 wlan0

Read the article
SFTP, Chroot problems on Redhat

- by Curtis_w

I'm having problems setting up sftp with a ChrootDirectory. I've done an equivalent setup on other distros, but for some reason I cannot get it to work on a Redhat AMI. The changes to my sshd_config file are: Subsystem sftp internal-sftp Match Group ftponly PasswordAuthentication yes X11Forwarding no ChrootDirectory %h ForceCommand internal-sftp AllowTcpForwarding no I have the concerned usere's homes at /home/user, owned by root. After connecting with a user in the ftponly group, I'm dropped into / without permissions for anything, and am unable to do anything. sftp bob@localhost Connecting to localhost... bob@localhost's password: sftp> pwd Remote working directory: / I can connect normally with users not in the ftponly group. openssh version 5.3 I've experimented with different permissions, as well as having users own their own home directory (gives a Write failed: Broken pipe error), and so far, nothing has seemed to work. I'm sure it's a permissions error, or something equally as trivial, but at this point my eyes are beginning to glaze over, and any help would be greatly appreciated. EDIT: James and Madhatter, thanks for clarifying. I was confused by chroot dropping me in /... just didn't think through it properly. I've added the appropriate directories and permissions to get read access. One other key part was enabling write access to chrooted homes: setsebool -P ssh_chroot_rw_homedirs on in order to get write access. I think I'm all set now. Thanks for the help.

Read the article
Write permissions on uploaded files - Linux, Apache, PHP

- by letseatfood

I am working on a PHP script that transfers files using FTP functions. It has always worked on my production server (which is a hosting service). The development server I have just setup (I am a novice to servers) is Debian Lenny with Apache2, PHP5, and MySQL5. The file transfer works correctly, but once the file has been written to the server, it has permissions of 600. This makes it impossible for me to view the file (JPEG) in the web browser, as permission is denied. I have scoured the internet and even broken my server installation and reinstalled it trying to figure this out (which has been fun, nonetheless!). I know it is unwise to set 777 permissions on public accessible files, but even that will not solve the problem. The only thing that works is if I chmod 777 thefile.jpg after it has been transferred, which is not a working solution. I tried changing the owner of my site files to www-data per this post, but that also does not work. My user is mike, and it still does not work whether the owner of the files is mike or root. Would somebody point me in the right direction? Thanks! And, of course, let me know if I can clarify anything.

Read the article
IP queue buffer

- by summerbulb

I seem to have an issue with IP queue. I have a linux machine that I am using to run some experiments. The linux machine is configured to be a router, having two NICs, connecting two other computers, and managing their network traffic. All incoming packages are captured, using iptables, and analyzed by a C application. The application analyzing the packets has a built-in delay, as part of the experiment. So I have one very fast computer sending packets through my linux-router and a (relatively) slow linux-router that analyses and deals with the packets, one by one. This situation leads to the fact that when I fire up a sender application on one of the computers connected to the linux-router, my IP queue on the linux-router gets filled up (almost) instantaneously. The IP queue's max length is currently set to 1024, and if it overflows, the packets are dropped. This is expected and i'm OK with it. But, (and this is where it gets interesting), every now and then I get the following error: "Failed to receive netlink message: No buffer space available" At start, I thought this was due to the IP queue overflow, but after some analysis i found that sometimes I get the error even if the IP queue buffer did not overflow, and sometime I DON'T get the message even though the buffer DID overflow. When I run > cat /proc/net/ip_queue, I get the following table (also used to monitor the IP queue overflow): Peer PID : 27389 Copy mode : 2 Copy range : 65535 Queue length : 0 Queue max. length : 1024 Queue dropped : 1166875 Netlink dropped : 2916 Looking at the last two values, Queue dropped seems to refer to packets that did not manage to get into the IP queue because the buffer was full. I can see this value rise as I bombard the linux-router. Netlink dropped ( as it's name implies :) ) seems to have to do with the error i'm getting. I did my best to search for material on this error, but wasn't able to find anything that seemed to point me in the required direction. Bottom line: Why am I getting this error and what can I do to avoid it?

Read the article
Why do HTTP loopback connections not work on my subdomains?

- by memeLab

I have a shared hosting account at Jumba running Linux kernel 2.6.9-103.ELsmp (don't know if that helps) with cpanel 1.0 (RC1). I am using the WordPress plugin Backup Buddy, which requires HTTP loopback connections to monitor / complete backups. This works fine on memelab.com.au, but doesn't work at any subdomain (e.g.: staging.memelab.com.au). Is it possible to setup an A record or some such to remedy this? I'm aware of a workaround, (setting WP_ALTERNATE_CRON) but I find this unsatisfactory due to the messy URLs. BackupBuddy:_Frequent_Support_Issues#HTTP_Loopback_Connections_Disabled Here is the reply from my host: …as main domain have it's own separate DNS entry it have localhost entry which helps for looback connections where as subdomains don't have separate DNS zone, so it is not possible to create looback connections for it. I have cpanel access to the 'advanced zone editor' - is there anything tricky I can do there? maybe 127.0.0.2? (I remember reading that there were at least 8 available local IPs available on (some) Linuxes.) All the A records point to the server IP, with the exception of localhost.memelab.com.au which points to 127.0.0.1. I've just tried entering a new A record: localhost.itours.memelab.com.au pointing to 127.0.0.2. I still get the warning in Backup Buddy that loopback is not active, and Cpanel won't let me enter 127.0.0.1 (guess it doesn't work like that!) nslookup itours.memelab.com.au Server: 203.88.112.33 Address: 203.88.112.33#53 Non-authoritative answer: Name: itours.memelab.com.au Address: 117.55.224.177

Read the article
Terminate child processes on ctrl-c

- by jackweirdy

In tiny core linux, I have the following script: #!/bin/sh # ~/.X.d/freerdp.sh rdp(){ while true do xfreerdp -f [IP Address] done } rdp & It's pretty simple; when X starts up and checks the .X.d directory (as is the case in tiny core) it finds and executes this script. The script starts up freerdp and keeps a connection open to the server by restarting it whenever it closes. As you can see from the rdp & line, the function is run in the background to allow X to continue its startup routine. The problem is that whenever I cancel X with a Ctrl-Alt-Backspace the rdp process doesn't die. I'm looking for a way to kill the process as soon as X finishes, either through: A) a script, executed on X closing, which kills the process or B) by modifying the script to check the return value of the xfreerdp command. NB - if the solution does check the return value, it must only end if the command fails to open the X display. For that reason, if you could point me to a reference for xfreerdp return values I'd be grateful.

Read the article
saving and searching encrypted mail

- by student

I often send and receive gpg-encrypted mail. At the moment I use thunderbird + enigmail (in linux) to do that. As far as I know there is no way in thunderbird to find all encrypted messages which bodies contain particular keywords. There also seems to be no option to save encrypted mails decrypted (so they would be searchable). However for me it is important to be able to search old encrypted mails. So my question is: Is there a way in linux to save incoming mails automatically decrypted in my inbox and save outgoing encrypted mail decrypted in the send folder? Both times adding a line to the body which remarks that the mail was encrypted. It could be another email client for linux that could to that or perhaps a solution using procmail or maildrop. For a procmail solution I guess there could be some problems with encoding (perhaps one have to use emil?) the solution should work well with german special characters in subject and body. Note that the solution should work for multipart encrypted messages (including encrypted attachments) too i.e. with everything which could thunderbird + enigmail generate. Further note that I don't want a discussion about security holes. For me it's ok if messages are stored decrypted on my harddrive (which is encrypted as a whole anyway). In doubt for a first solution it would be ok to store my private key passphrase in cleartext on my harddrive, too. The point is that the mails are encrypted on the mailserver or more generally on their "way through the net".

Read the article
Nginx rewrite for link shortener + Wordpress pretty URLs

- by detusueno

Okay so I installed Nginx/PHP/MySQL/Wordpress via a online walk through, and it had me enter these rewrites to enable Wordpress pretty URLs: if (-f $request_filename) { break; } if (-d $request_filename) { break; } rewrite ^(.+)$ /index.php?q=$1 last; error_page 404 = //index.php?q=$uri; This is then included in the vhost for my domain. What I'm trying to do now is add some redirection/link shortner rewrites that will play nice with the setup I have in mind. I'd like to redirect "x.com/y" to "x.com/script.php?id=y" for all external links that I post. The Wordpress link setup right now has almost all internal links begin with "news" (x.com/news/post-blah, x.com/news/category/1, etc) BUT I also have a few root links that point to some internal content (x.com/news, x.com/start). I'm guessing that's going to cause some conflicts. What's the best approach to do this? I've never worked with Nginx (or any rewrite rules) but maybe I can distinguish between "x.com/news" and "x.com/news/" to allow it to play nice? I had a friend setup a working version of this in Apache and it'd be nice if I could get this up on Nginx again.

Read the article
Unable to connect to FTP - Connection timeout after MLSD

- by Afrosimon

So here is my problem, I'm absolutely unable to connect to a FTP server, in circumstances I've never seen before. Here is the situation : I get a "Connection timed out" just after the MLSD command. I usually use Filezilla, under Ubuntu, but to make sure the problem isn't related to this particular client I tried a few others : gftp on ubuntu and winscp and freeftp on windows 7. All the same result. Also made sure to try with Active or Passive modes. Same result. At this point I would be inclined to think there is something wrong with my current network (furthermore, according to a coworker the FTP server is OK). But I did check with http://ftptest.net/ and I am able to get the directory listing (which I'm not able to through a FTP client). So in the end the last thing I didn't tried is to go on another network, solution which seems would work, but wouldn't be very practical in the long run. And thus I guess there's something wrong with my router... but what could it possibly be? Note : I did try to register and post this question on filezilla's board first... but I can't create an account with a gmail nor hotmail account. WTF?

Read the article
Setting the default permissions for files uploaded via FTP to a directory

- by Kerri

Disclaimer: I'm just a web designer/coder, and server admin stuff is my weakest point of them all. So be easy on me (and very specific). I'm using a simple CMS (Unify) on a site, where part of the functionality is that the client can upload files to a specified directory (using FTP). The permissions for the upload directory are set to 755. But when files are uploaded through the interface, they are uploaded with permissions set to 640 (instead of 644), so site visitors cannot acces the files. When I emailed the CMS's support about this, they told me that it was a server setting, and I need to make sure that files uploaded through FTP are set to 644. Makes perfect sense, but I have no idea how to do this. Any help would be greatly appreciated. This site is a shared site hosted by Network Solutions (Unix), so my access options are limited. I can edit .htaccess files, and php.ini, but that's about all I have access to. It appears I can't even log on via shell. ETA: 11/11/2010 Thanks all. I was able to work around this problem by setting up the CMS's settings in a different way. I'd be interested in following up on Nick O'Niel's suggestions, because I think he's on the right track, but unfortunately I can't access the necessary files on this particular server. So, anyway, I'm leaving this open, since the original questions isn't exactly resolved. Unfortunately, I probably can't put a correct answer to the test, since the shared server in question has nearly all of its config files tightly locked down.

Read the article
Problem with Outlook 2010 (SMTP AUTH LOGIN)

- by Filipe YaBa Polido

**IGNORE THIS QUESTION - SOLVED WITH A PYTHON SCRIPT available at: http://yabahaus.blogspot.com I have to connect one customer Outlook 2010 to a remote server on which I have either no right, neither way to talk to the sysadmin. This is the thing, after installing and reviewing the logs on Wireshark: Outlook Express: HELO machine AUTH LOGIN username base64 encoded password base64 encoded mails go through. Outlook 2010: HELO machine AUTH DIGEST-MD5 response from server Outlook sends just a * AUTH LOGIN password base64 encoded So... I can send mails in the same domain, but can't send outside, it gives me a relay denied message. My point is... Why the h**l Outlook 2010 doesn't send the username AND the password?! It can never login the right way :| With other versions of Outlook it works fine, and with OE works great, it auths and allows to send mail to a different domain. I've googled and nothing worked. I'm pretty sure that I'm not alone with this one. My last resort will be to configure a local proxy/server that relays to the original one :| Any help would be appreciated. Sorry my bad english as is not my natural language. Thanks.

Read the article
My DNS works! But, what is the simplest way to add something to it?

- by Alex

This is my current DNS example.com.db zone file. I followed a tutorial. It works, because when I point to this DNS from another server via resolve.conf, it will actually forward me to the right IP when I do "ping example.com". ; ; BIND data file for example.com ; $TTL 604800 @ IN SOA example.com. info.example.com. ( 2007011501 ; Serial 7200 ; Refresh 120 ; Retry 2419200 ; Expire 604800) ; Default TTL ; @ IN NS ns1.example.com. @ IN NS ns2.example.com. example.com. IN MX 10 mail.example.com. example.com. IN A 192.168.254.1 www IN CNAME example.com. mail IN A 192.168.254.1 ftp IN CNAME example.com. example.com. IN TXT "v=spf1 ip4:192.168.254.1 a mx ~all" mail IN TXT "v=spf1 a -all" Right now, ping example.com....goes to 192.168.254.1. That's great!!! it works! My question is--how can I add something do this file so that when my other servers: ping dbserver1....goes to 44.245.66.222 ping cacheserver1 ....goes to 38.221.44.555 I want to use it like a universal hosts file for my machines.

Read the article
apache2 server running ruby on rails application has go daddy cert that works in chrome/firefox and ie 9 but not ie 8

- by ryan

I have a rails application up on a linode ubuntu 11 server, running apache2. I have a cert purchased from godaddy, (where we also bought our domain) and the cert is installed on my server. Part of my virtual host file: ServerName my_site.com ServerAlias www.my_site.com SSLEngine On SSLCertificateFile /path/my_site.com.crt SSLCertificateKeyFile /path/my_site.com.key SSLCertificateChainFile /path/gd_bundle.crt The cert works fine in Chrome, FireFox and IE 9+ but in IE 8- I get this error: There is a problem with this website's security certificate. The security certificate presented by this website was issued for a different website's address. I'm hosting multiple rails apps on this same server (4 right now plus some old php sites that don't need ssl). I have tried googling every possible combination of the error/situation that I could think of but at this point I'm shooting in the dark. The closest I could come up with is that some versions if IE don't support SNI. But that doesn't apply here because I am getting the warning on windows 7 machines running IE 8, and the SNI only seemed to apply to IE 8 if the operating system was windows XP. So why is this cert being accepted by all browsers but giving me a warning in IE 8? Edit: So doing a little more digging and I figured out some more. It turns out this is effecting IE 9 as well. However the problem seems to be that IE is not traversing the ssl chain to get to the right cert. FireFox and Chrome when I go to view certificate show the correct one, but IE is showing one of our other sites certificates. REAL QUESTION HERE: That being the case why is IE not getting the right certificate when others are and how do I fix it?

Read the article
Connect to Nonencrypted Wireless Network Using Ubuntu Commands

- by Tim

I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

Read the article
DNS to \\Server\ wrong - \\Server.company.local\ works fine

- by JimmyClif

I had a little network glitch and since then one of my servers shows up wrong at some workstations when typing in \\server\. Example: On workstationA I go to Explorer and and type \\server\ and it brings me to our copier at 192.168.2.101. \\server.company.local\ gets me to the right place at 192.168.2.252. Ping with server pings 192.168.2.252 - same correct result with ping server.company.com nslookup also shows correct result with both. reverse lookup by ip is correct also. I flush the DNS on the workstation and the error still occurs. reboot same result. At that point I give up and start remapping the shares to \\server.company.local\share just to get the user back working... DNS Server has correct entries for that server. Can access the server via \\server\ on dns server, all looks fine. Eventually the workstation figures it out by itself and \\server\ works again but my life wouldn't be as stressful if I had a clue what happened or how to fix it myself. Thanks for your time looking and answering.

Read the article
if the file changes send email about diff

- by user62367

I have 2 script. Script "A", Script "B". Script A is regulary watching the dhcpacks [dhcp release is configured to 2mins] in the logs, for the past 2 minutes. It writes the MAC addresses to a file [/dev/shm/dhcpacks-in-last-2min.txt] every 2 minutes. Ok, this is working, active clients are in this file. Super! Script B: On pastebin I'm trying to create a script, that watches the changes in /dev/shm/dhcpacks-in-last-2min.txt file ( every 1 sec). Ok. But: my watcher script [the pastebined][1] is not working fine - sometime it works, sometime it sends that someoneXY logged out`, but it's not true! Nothing happened, and the problem is not in the Script A. Can someone help me point out, what am I missing? How can I watch a file (in every sec), that contains only MAC addresses, and if someone doesn't get dhcpack in 2 minutes, the file /dev/shm/dhcpacks-in-last-2min.txt changes, and that clients MAC address will be gone from it, and i need to know, who was it [pastebined my script - but somethings wrong with it]. Thank you for any help..I've been pathing my script for days now.. :\

Read the article
Router startup problem

- by gfmoz

I have problems with my Tilgin Vood Router. As I try to start my router by turning the power on (captain obvious), it generally doesn't work the first 3-4 times. This is getting very annoying. Five minutes after turning the power on the router's signal LEDs don't blink in the way they should do in a connected state. I can connect to my routers web configuration interface through my PC connected to it via LAN though I can't access the internet. It usually takes the router five minutes to get to the point where it should be connected to the internet but as it doesn't work the first times. So I turn on my router 3-5 times, let him work 5 minutes and then suddenly, after turning the pow*emphasized text*er off and on again it all works. The problem is regarding startup only, when I get it to work everything runs as smooth as a 1980-s text-based C++ game on a 3ghz machine. I also have to restart my PC too in order for everything to work. - How can I solve this problem? - Just leave the router turned on all time? I prefer a daily IP switch, though. - May the problem have something to do with my PC? There is another one connected to the router too and it doesn't work there either.

Read the article
Tunneling a public IP to a remote machine

- by Jim Paris

I have a Linux server A with a block of 5 public IP addresses, 8.8.8.122/29. Currently, 8.8.8.122 is assigned to eth0, and 8.8.8.123 is assigned to eth0:1. I have another Linux machine B in a remote location, behind NAT. I would like to set up an tunnel between the two so that B can use the IP address 8.8.8.123 as its primary IP address. OpenVPN is probably the answer, but I can't quite figure out how to set things up (topology subnet or topology p2p might be appropriate. Or should I be using Ethernet bridging?). Security and encryption is not a big concern at this point, so GRE would be fine too -- machine B will be coming from a known IP address and can be authenticated based on that. How can I do this? Can anyone suggest an OpenVPN config, or some other approach, that could work in this situation? Ideally, it would also be able to handle multiple clients (e.g. share all four of spare IPs with other machines), without letting those clients use IPs to which they are not entitled.

Read the article
Free antivirus solutions for Windows

- by kristof

What free antivirus solutions would you recommend? What are the limitations? What are the dangers of using free versions as opposed to paid solutions? E.g. are they less reliable? As mentioned by Tony, most of the free solutions are limited to personal use so the question will mainly focus on solutions for personal use. See if your antivirus of choice is already listed. Chances are it is. If you spot an answer that mentions one you already use, vote that up if you think it's a good solution. If you know of a feature or drawback not listed, or can include experiences in dealing with it, please edit the answer accordingly. If you know of any that can also be used at work please point this out. This covers all Windows platforms from XP, Vista and Windows 7. If you see an existing entry that needs an update or to add your testimonial, please do.

Read the article
How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

- by Stephen

I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

Read the article
What are the "least legally restrictive" well-connected countries to host a website?

- by monster

NB: I am aware that this question is subjective, as it can't be defined precisely, but the answers should still be "objective": Country name, and what makes it legally safer. EDIT: A) I am located in Germany. B) I am NOT looking for a place to offer pirated Software/Media; no binary on my site, except "profile icon". Hello! I want to start publishing "social" websites / apps, and I found that the biggest initial problem is this: Any and all services I have to depend on, including Domain Registrar, DNS provider, Server/Cloud Provider, CDN Provider, ... even my Insurance Agent, basically say that they can "throw me out" if my website contains "unacceptable" content. It's always phrased in such a way that basically anything can fall under "unacceptable" content. This is very frustrating because you just can't fully control what users post on your "social website", and you so you basically have to expect when you go to bed that your site is going to be gone when you wake up. I've heard a lot of horror stories about this. Since the "Terms Of Service" of all those providers are foremost to protect themselves from legal actions, and those legal actions depend on the country where they are located, it seems like the first step is to find which country is the "safest" to locate a site. "Safest" being defined as, where I am least likely to get in legal trouble with the local authorities, if some user posts something unacceptable in some way. The main restriction is that it should also be a "well-connected" country, because there is no point in being "safe", if my users can't get to my sites, or the latency is unacceptable. I am targeting the English speaking people in any country as my future users.

Read the article
How to get Synergy working on Ubuntu 11.10 and Windows 7?

- by Linda

I'm using Ubuntu 11.10 32-bit and Windows 7 64-bit, however, Synergy only works when a window (application or folder) is open and touching the edge of the screen where the mouse should "jump". In other words, if a window is open and maximized, Synergy works normally. Without any windows, the mouse does not jump to the other screen. My steps: (Ubuntu) apt-get install -y quicksynergy (Windows) Install Synergy (I've tried both 1.3.8 and 1.4.8 and both 32 and 64-bit) On Ubuntu 11.10 32-bit (Synergy Server config): ~/.quicksynergy/synergy.conf section: screens myubuntu: mywin7: end section: links myubuntu: right = mywin7 mywin7: left = myubuntu end On Ubuntu 11.10 32-bit: $ /usr/bin/synergys -f --config .quicksynergy/synergy.conf ... 2012-04-25T14:04:12 NOTE: client "mywin7" has connected /build/buildd/synergy-1.3.6/lib/server/CServer.cpp,287 (output hangs here) On Windows 7 64-bit: Synergy 1.3.8 Client on Microsoft Windows 7 x86 (WOW64) started client connecting to 'myubuntu': ###.###.###.###:24800 connected to server (output hangs here) At this point, things should work, but my mouse still can't change screens unless a window is maximized on my Ubuntu machine. Everything is running on port 24800. No firewall on Ubuntu. Firewall port 24800 open on Windows 7. This was previously working on Ubuntu 10.10 and Windows 7 (so only Ubuntu has been upgraded). I'm open to using either 32 or 64-bit on either server or client side, but I just want to get it working on Ubuntu 11.10 and Windows 7! I'm also using Ubuntu Classic (no effects), and not Unity.

Read the article
Server Clustering (Django, Apache, Nginx, Postgres)

- by system-matrix

I have a project deployed with django, Apache, Nginx and Postgres. The project has requirement of live data viewable to customers. The projects main points are: 1. Devices in field send data to server(devices are also like website users) after login. 2. There is background import process which imports the uploaded data in postgres. 3. The webusers of the system use this data and can send commands to the devices, which devices read when they login. 4. There are also background analysis routines running on the data. All the above mentioned setup and system is deployed on one amazon EC2 cloud machine. The project currently supports over 600 devices and 400 users. But as the number of devices are increasing with time the performance of the server is going down. We want to extend this project so that it can support more and more devices. My initial thinking is, We will create one more server like current one and divide the devices amongst these to servers. But Again We need a central user and device managment point though django admin. Any Ideas? What are the best possible ways to create a scalable architecture? How can I create a Postgres Cluster and Use it with Django, if possible?

Read the article
Block SMTP session with sender domain which doesn't itself accept SMTP connection.

- by bignose

I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the declared sender's domain has an MX which refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. Note that I'm not, as some commenters have assumed, talking about checking whether the SMTP client will receive messages. The check I want is whether the declared sender's domain (regardless of who the current SMTP client is) will accept SMTP connections from here. In other words: when we get around to sending a message back, we'll need the sender's domain to accept SMTP connections; I want to do that check before accepting the incoming session. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

Read the article
Is it possible to download extremely large files intelligently or in parts via SSH from Linux to Windows?

- by Andrew

I have a ~35 GB file on a remote Linux Ubuntu server. Locally, I am running Windows XP, so I am connecting to the remote Linux server using SSH (specifically, I am using a Windows program called SSH Secure Shell Client version 3.3.2). Although my broadband internet connection is quite good, my download of the large file often fails with a Connection Lost error message. I am not sure, but I think that it fails because perhaps my internet connection goes out for a second or two every several hours. Since the file is so large, downloading it may take 4.5 to 5 hours, and perhaps the internet connection goes out for a second or two during that long time. I think this because I have successfully downloaded files of this size using the same internet connection and the same SSH software on the same computer. In other words, sometimes I get lucky and the download finishes before the internet connection drops for a second. Is there any way that I can download the file in an intelligent way -- whereby the operating system or software "knows" where it left off and can resume from the last point if a break in the internet connection occurs? Perhaps it is possible to download the file in sections? Although I do not know if I can conveniently split my file into multiple files -- I think this would be very difficult, since the file is binary and is not human-readable. As it is now, if the entire ~35 GB file download doesn't finish before the break in the connection, then I have to start the download over and overwrite the ~5-20 GB chunk that was downloaded locally so far. Do you have any advice? Thanks.

Read the article

< Previous Page | 739 740 741 742 743 744 745 746 747 748 749 750 | Next Page >