Search Results

Search found 24734 results on 990 pages for 'floating point conversion'.

Page 739/990 | < Previous Page | 735 736 737 738 739 740 741 742 743 744 745 746  | Next Page >

  • Adding a Printer to my Print Server Failing

    - by Rudi Kershaw
    So, on the Windows Server page I read the following. Step 4: Add Network Printers Automatically Print Management (Printmanagement.msc) can automatically detect all the printers that are located on the same subnet as the computer on which you are running Print Management, install the appropriate printer drivers, set up the queues, and share the printers. To automatically add network printers to a printer server Open the Administrative Tools folder, and then double-click Print Management. In the Printer Management tree, right-click the appropriate server, and then click Add Printer. On the Printer Installation page of the Network Printer Installation Wizard, click Search the network for printers, and then click Next. If prompted, specify which driver to install for the printer. So, I have got to this point, made sure the printer (Canon MP620) is on and correctly plugged into the network. However, when I click "Search the network for printers", the wizard doesn't find it. Now, I can't get any further. Is there anything I could be doing wrong? How should I proceed moving forwards?

    Read the article

  • Designing a software based load balancer

    - by Kishore pandey
    Hello to all Server fault users, I am new to this website but have constantly been using the mother website, stackover flow. Well to begin with, i would like to design a load balancer for the organization i am working for. As i am very new to this whole, idea about load balancing and networks. I am finding it very difficult to start my project. I did a lot of research on already existing load balancer and found some(HAPROXY,NGINX) that could solve my problems, but the point is, I am still in a dilemma if they could answer the following requirements of mine: The client and server in my architecture are distributed. The load balancer should take care of the firewall. LB server should balance the load among all servers present in WWW cloud. The LB server should have some sort of configuration file, with the help of which it is possible to configure the servers. Heart beat: With the help of which it would be possible to check if any server is down, if any server is down the request should be passed to some other server. Various load balancing algorithms of the incoming requests. Easy error handling. It should be fairly possible to prioritize the incoming requests. Is there any already available load balncer solution on the market that could satisfy these requirements? If not is there any base code available with the help of which i could develop my own load balncer. If not where should i start from scratch? I am practically new to everything. Any help from a load balancer expert is very much appreciated. Thanx a ton in advance. Cheers and regards. Kishore

    Read the article

  • MySQL partition "full"?

    - by gdea73
    I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

    Read the article

  • Does MySQL have some kind of DoS protection or per-user query limit?

    - by Ghostrider
    I'm a bit at a loss. I'm running a MySQL database that's roughly 1GB data in indices combined on a dedicated Linux server. DB version is '5.0.89-community'. Configuration is controlled via cPanel. PHP actually runs elsewhere on a shared hosting. IP addresses are static and don't change. Access from remote IP address is properly configured. Website gets around 10K hits per day with each hit generating a a database query. Some of these queries are expensive (~1 sec execution time). All is fine and well until at some point DB server starts refusing connections from the client, claiming that specific user can't access the server from that IP. Resetting the server will always fix the problem for a day or two and then the same thing happens. There are some other DBs on that server, some of which are hit pretty hard on occasion but constantnly. One of the apps maintains several persistent connections since it does couple of updates per minute. Though I don't think it's related. What's driving me mad is that I can't figure out why server would start refusing connections. There is nothing in the logs. This server is a hosted dedicated server so hosting company created the OS image and I didn't write or go over every line of configuration. I'd do it but I'm at a loss as to where start looking. Any advice is appreciated.

    Read the article

  • Enabling JMX for proxool with tomcat

    - by dialt0ne
    I am trying to get proxool's MBeans available so that I can see/manipulate them with jconsole. I have jconsole working, but I don't see anything related to proxool. The system is using Sun Java 1.5.0_17 (I know, I know... I'm working with the developers to upgrade). JMX is enabled by modifying $JAVA_OPTS in my tomcat 5.5 startup script: SJO="$SJO -Dcom.sun.management.jmxremote" SJO="$SJO -Dcom.sun.management.jmxremote.port=4998" SJO="$SJO -Dcom.sun.management.jmxremote.authenticate=false" SJO="$SJO -Dcom.sun.management.jmxremote.ssl=false" JAVA_OPTS="$JAVA_OPTS $SJO" I have proxool configured with JNDI in server.xml: <GlobalNamingResources> <Resource name="jdbc/database" auth="Container" type="javax.sql.DataSource" factory="org.logicalcobwebs.proxool.ProxoolDataSource" user="username" password="password" proxool.driver-url="jdbc:oracle:thin:@fqdn.example.com:1521:MYSID" proxool.driver-class="oracle.jdbc.driver.OracleDriver" proxool.alias="mysid" proxool.maximum-connection-count="20" proxool.statistics="20s,5m,15m" proxool.statistics-log-level="INFO" proxool.jmx="true" proxool.verbose="true" /> </GlobalNamingResources> My test .jsp can run queries and I can see it using the connections with the proxool admin servlet, but I'm unsure if there's more I need to configure in tomcat or proxool to get JMX functioning. Advice? jmxproxy info edit: The jmxproxy servlet is working - when I go to the URL http://tomcatserver.example.com:4999/manager/jmxproxy/?qry=*:type%3DRequestProcessor,* the results are: OK - Number of results: 2 Name: Catalina:type=RequestProcessor,worker=http-8080,name=HttpRequest0 modelerType: org.apache.coyote.RequestInfo bytesSent: 0 requestBytesSent: 0 contentLength: -1 bytesReceived: 0 requestProcessingTime: 1297983483666 globalProcessor: org.apache.coyote.RequestGroupInfo@32dc51c8 requestBytesReceived: 0 serverPort: -1 stage: 0 requestCount: 0 maxTime: 0 processingTime: 0 errorCount: 0 Name: Catalina:type=RequestProcessor,worker=jk-127.0.0.1-8009,name=JkRequest794 modelerType: org.apache.coyote.RequestInfo virtualHost: tomcatserver.example.com bytesSent: 0 method: GET remoteAddr: 172.30.3.51 requestBytesSent: 0 contentLength: -1 workerThreadName: TP-Processor15 bytesReceived: 0 requestProcessingTime: 9 globalProcessor: org.apache.coyote.RequestGroupInfo@1e7d3b8e protocol: HTTP/1.1 currentQueryString: qry=*%3Atype%3DRequestProcessor%2C* requestBytesReceived: 0 serverPort: 4999 stage: 3 requestCount: 0 maxTime: 0 processingTime: 0 currentUri: /manager/jmxproxy/ errorCount: 0 And more to the point http://tomcatserver.example.com:4999/manager/jmxproxy/?qry=Catalina:type%3DEnvironment,resourcetype%3DGlobal,name%3DProxool yields: OK - Number of results: 0

    Read the article

  • Load Balancing Rails on Apache 2.x

    - by revgum
    My situation is that I need to proxy traffic to the root of my web server to port 81 for IIS, and then any traffic to a sub-directory needs to be directed to the rails app. my-server.com/ - needs to proxy to port 81 my-server.com/myapp - needs to point to the rails app This seems to be working alright for the rails application but the images, javascripts, and stylesheets are not actually working (proxied). I've tried to fiddle with the proxypass lines but it still doesn't work for me..can anyone help? Here's my complete VirtualHost portion of the config; LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_http_module modules/mod_proxy_http.so ProxyRequests off <Proxy balancer://myapp_cluster> BalancerMember http://127.0.0.1:3001 BalancerMember http://127.0.0.1:3002 </Proxy> <VirtualHost *:80> DocumentRoot "c:\ruby\apps\myapp\public" <Directory /myapp > Options FollowSymLinks AllowOverride None </Directory> ProxyPass /myapp/images ! ProxyPass /myapp/stylesheets ! ProxyPass /myapp/javascripts ! ProxyPass /myapp/ balancer://myapp_cluster/ ProxyPassReverse /myapp/ balancer://myapp_cluster/ ProxyPreserveHost on ProxyPass / http://localhost:81/ ErrorLog "c:\ruby\apps\myapp\log\error.log" # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog "c:\ruby\apps\myapp\log\access.log" combined </VirtualHost>

    Read the article

  • How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

    - by McCoy
    Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

    Read the article

  • Does btrfs balance also defragment files?

    - by pauldoo
    When I run btrfs filesystem balance, does this implicitly defragment files? I could imagine that balance simply reallocates each file extent separately, preserving the existing fragmentation. There is an FAQ entry, 'What does "balance" do?', which is unclear on this point: btrfs filesystem balance is an operation which simply takes all of the data and metadata on the filesystem, and re-writes it in a different place on the disks, passing it through the allocator algorithm on the way. It was originally designed for multi-device filesystems, to spread data more evenly across the devices (i.e. to "balance" their usage). This is particularly useful when adding new devices to a nearly-full filesystem. Due to the way that balance works, it also has some useful side-effects: If there is a lot of allocated but unused data or metadata chunks, a balance may reclaim some of that allocated space. This is the main reason for running a balance on a single-device filesystem. On a filesystem with damaged replication (e.g. a RAID-1 FS with a dead and removed disk), it will force the FS to rebuild the missing copy of the data on one of the currently active devices, restoring the RAID-1 capability of the filesystem.

    Read the article

  • SharePoint extranet security concerns, am I right to be worried?

    - by LukeR
    We are currently running MOSS 2007 internally, and have been doing so for about 12 months with no major issues. There has now been a request from management to provide access from the internet for small groups (initially) which are comprised of members from other Community Organisations like ours. Committees and the like. My first reaction was not joy when presented with this request, however I'd like to make sure the apprehension is warranted. I have read a few docs on TechNet about security hardening with regard to SharePoint, but I'm interested to know what others have done. I've spoken with another organisation who has already implemented something similar, and they have essentially port-forwarded from the internet to their internal production MOSS server. I don't really like the sound of this. Is it adviseable/necessary to run a DMZ type configuration, with a separate web front-end on a contained network segment? Does that even offer me any greater security than their setup? Some of the configurations from a TechNet doc aren't really feasible, given our current network budget. I've already made my concerns known to management, but it appears it will go ahead in some form or another. I'm tempted to run a completely isolated, seperate install just for these types of users. Should I even be concerned about it? Any thoughts, comments would be most welcomed at this point.

    Read the article

  • Understanding encryption Keys

    - by claws
    Hello, I'm really embarrassed to ask this question but its the fact that I don't know anything about encryption. I always avoided it. I don't understand the concept of encryption keys (public key, private key, RSA key, DSA key, PGP Key, SSH key & what not) . I did encounter these in regular basis but as I said I always avoided them. Here are few instances where I encountered: Creating Account: A public RSA or DSA key will be needed for an account. Send the key along with your desired account name to [email protected] I really don't know what are RSA/DSA or How to get their keys? Do I need to register some where for that? Mailing: I'm unable to recall exactly but I've seen some mails have some attachments like signature or the mail footer will have something called PGP signature etc.. I really don't get its concept. GIT Version control: I created account in assembla.com (for private GIT repo) and it asked me to enter "SSH keys" to my profile. Where am I gonna get these? Why do I need it? Isn't SSH related to remote login (like remote desktop or telnet)? How are these two SSHs related & differ? I don't know in how many more situations I'm going to encounter these things. I'm really confused and have no clue about where to start & how to proceed to learn these things. Kindly someone point me in correct direction. Note: I've absolutely zero interested in encryption related topics. So, there is no way I'm going to read a graduate level book on this subject. I just want to clear my concepts without going into much depth.

    Read the article

  • Laptop battery holds charge, but won't charge any more.

    - by Jeff
    Ok, I'm sure I will need to replace either my battery or my AC adapter, but would rather not buy one if the other is the problem. My problem is. I have a Sager laptop that gets quite a bit of use. The charging has always been a little bit odd. If I was in the process of using it, it would charge just fine and stay On AC power. If I left it alone, however(power settings to ONLY turn off the monitor) in either Ubuntu or Windows 7 it decides that it didn't want to use AC power anymore and would just start draining the battery until it died. Now, suddenly, it won't charge at all. The capacity was great up to this point which happened in an instant. It will recognize the battery but won't see the AC power if plugged in while the battery is in. I can power up the laptop without the battery and it works fine. If I plug in the battery while powered up it will claim it's charging it, but it stays at the same percentage. If I unplug the power, it will switch over to Battery fine, but I have to power down and unplug the battery to get it back on AC power. I've had dying/dead batteries before but they typically won't hold a full charge anymore but it still winds up to 100% then drops quickly when unplugged. This seems more like a chip problem in the battery to me, but I'm not sure. Any ideas?

    Read the article

  • How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface?

    - by JJarava
    This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

    Read the article

  • Which upgrade path for disk IO bound postgres server?

    - by user41679
    Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

    Read the article

  • Router not connecting to the internet

    - by Peter
    I had a weird problem this morning with my router - it's an Alice Gate VoIP 2 Plus WI-FI - not connecting to the internet after more or less 1 hour online (I'm always connected with the ethernet cable). The led status lights for Power, WI-FI, ADSL, Internet, Service should be on in order to be connected and navigate online. The problem was that the leds ADSL, Internet were off and I did not know why because it never happened before. I looked at the stats in the settings and the numbers for Bytes/Packages for both Sent/Received were there and increasing but I couldn't connect to the internet. I called tech support, they checked and told me to keep the router on for 48 hours because they were checking it. I've reset it twice before and after I called tech support and it still did not work so after about 2 hours of waiting I tried connecting using WI-FI and the leds 'magically' turned on, first the ADSL and Internet(Internet led always turns on last). At this point I'm curious what could of caused this and I'm doubting that the tech-support guys did something. What could of been the problem with the ethernet cable not connecting in the first place? It always works. What do the tech support guys normally do when they tell me to keep the router on so they can 'check it'? PS: I'm using ubuntu 32 bit

    Read the article

  • FWBuilder DNS Object Run Time - when exactly does it resolve the DNS name?

    - by Jakobud
    In Firewall Builder, when you use the DNS Object and set it to run time, when exactly does the firewall (iptables in our case) actually resolve the DNS name? Is it whenever a call is made to that DNS name in the firewall? So the firewall would resolve the name on the fly whenever someone/something tries to access that DNS name? Or is it when you execute the fw script to load the rules into iptables? So in this case, it would resolve the DNS name that one time and then hard-code the resulting ip address into the iptable rules? From what I read, I think its #1, but it's just not 100% clear to me. We have two servers for a certain function on our network. One is the primary server and one is backup. alpha0.domain.com alpha1.domain.com In DNS we have this: alpha.domain.com -> alpha0.domain.com If the primary server goes down and we need to switch to the backup, I just change our local DNS record to point to alpha1.domain.com instead. So back to the firewall, if I just put in a Domain Object as alpha.domain.com, do I have to reload the firewall rules every time we switch to the backup alpha server and change the DNS record? Or will the firewall automatically resolve to the correct address even after the switch?

    Read the article

  • Vista won't boot. BSOD: Page fault in nonpaged area

    - by user31576
    Here's the story: I let Windows Update do the updates it wanted to do, then rebooted the computer. The updating process was taking time so I went away. When I came back, my computer was rebooting. It got as far as the Windows logo with the laoding bar. BSOD'd. Rebooted. And I'm stuck in this loop ever since. Looked up on the net, the "Page fault in nonpaged area" seems to be linked to faulty RAM or drivers. So I ran a memory test, it found no error. When I try in safe mode (with promt) I can see a list of drivers being loaded, then I get the same BSOD. I tried to repair using the Vista DVD, it says "nothing to repair". I tried to restore to a previous state, it says "no restore point found". So, my guess is, it's got something to do with the drivers. How can I identify the one causing the BSOD? If you have any other leads, What can I do? By the way, I'm writing from this very computer, running a linux distro I installed after the BSOD loop started. So i guess it's not an hardware issue. I have backed up important data, and will format and reinstall Windows if I must. But I'd like to avoid that. Thanks in advance for any help you can give me.

    Read the article

  • what is this kicker process that shows up when i do top?

    - by rashid
    This morning when I came to my office i noticed the machine very slow so I did 'top' at the terminal and i see at least 50 process running and they are "kicker-3.4-reve"!!! I am using RedHat Linux It is taking up memory, how do I get rid of it? How could this happen and how can I avoid it fro happening again? (There is no point in pasting the whole thing but here is a glimpse) 31508 <user> 25 0 87212 8388 7144 S 3 0.1 1:48.34 kicker-3.4-reve 31675 <user> 25 0 87212 8384 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31708 <user> 25 0 87212 8384 7144 S 3 0.1 1:45.04 kicker-3.4-reve 31915 <user> 25 0 87212 8388 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31928 <user> 25 0 87212 8388 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31930 <user> 25 0 87212 8388 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31960 <user> 25 0 87212 8384 7144 S 3 0.1 1:47.14 kicker-3.4-reve 32050 <user> 25 0 87212 8392 7144 S 3 0.1 1:44.24 kicker-3.4-reve 32053 <user> 25 0 87212 8384 7144 S 3 0.1 1:44.24 kicker-3.4-reve 32168 <user> 25 0 87212 8392 7144 S 3 0.1 1:45.34 kicker-3.4-reve

    Read the article

  • What are the requirements for Windows Remote Assistance over Teredo?

    - by Jens
    I try to get the Windows 7 (or Vista) remote assistance feature to work, without using UPnP on the novices computer. After enabling Teredo on the expert's computer (that is in a corporate network, and therefore has teredo disabled by default), I tried to connect to the novice both using Easy Connect and the invitation file with no success. My triubleshooting included the following (so far). A connection to the novice from my home pc was successful, hinting at a misconfiguration on the experts side. Both computers have a "qualified" connection to the Teredo Server. Both computers have a valid Teredo IP, access to the Global_ PNRP cloud and can resolve names registered with PNRP on the other computer. The expert can resolve the PNRP Id automatically generated with an Easy Connect help request Both computers can ping the other's PNRP name. Both computers can ping the other's Teredo IP Address using ping -6 Now, I am a little stumped. I expected Remote Assistance to work at this point, since my corporate firewall has no Teredo filtering. What could RA cause not to work in this setting? Thanks in advance!

    Read the article

  • What is it safe to let Revo Uninstaller cleanup leftovers?

    - by msorens
    I have been a user of Revo Uninstaller (free) for sometime and find it does a very good cleanup job with typical applications. Today I wanted to clean up my machine a bit more so I proceeded to remove Visual Studio 2005 with Revo Uninstaller. The VS installer removed the app with no issues, then Revo reported about 20,000 leftover registry keys. I am used to basically just see Arpcache and Muicache... since I am not a registry expert I had no clue about most of the 20,000 listed. So I backed up the registry then let Revo remove the 20,000. It next reported about 1500 leftover files which included my Microsoft Office applications(!) that I knew it should not be touching. So I did not delete any files with Revo. Suspecting that some of the removed keys were also Office-related, I tried to open Word and Excel, both of which knew something was up, as the installer kicked in (albeit just briefly) for each of them. At this point, since I knew there were issues, I just restored the registry and I am now (seemingly) running OK. My question, then: When is it safe to trust Revo Uninstaller? As a seasoned software professional, my own answer to this would be the obvious "When the keys it reports are something you understand and know are safe to delete" but then that makes Revo of little use except to registry experts, does it not...?

    Read the article

  • Blocking an IP from connecting

    - by Sam W.
    I have a problem with my Apache webserver where there's and IP than connecting to my server, using alot of connection and wont die which eventually making my webserver timeout. The connection will stay as SYN_SENT state if I check using netstat -netapu I even flush my iptables and use the basic rules and it still doesn't work. The IP will get connected when I start my Apache Basic rules that I use: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -s 89.149.244.117 -j REJECT iptables -A OUTPUT -s 89.149.244.117 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT The bold part is rule in question. Not sure this is related but tcp_syncookies value is 1. Can someone point out my mistake? Is there a way to block it for good. Thank you

    Read the article

  • Installing mysqlnd for php 5.4.9 on CentOs 6.3

    - by kira423
    Okay let me get straight to the point, I am a complete noob, and have never done stuff like this at all, I have read tutorial after tuorial but I cant get anything to work. When I tried to install the rpm file I got this error rpm -Uvh ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm warning: /var/tmp/rpm-tmp.ez4vvd: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php-pdo(x86-64) = 5.4.9-1.el6.remi is needed by php-mysqlnd-5.4.9-1.el6.remi.x86_64 so I tried installing that rpm file and got this error rpm -ivh ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm curl: (9) Server denied you to change to the given directory error: skipping ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm - transfer failed I used the ftp links because I have no idea how else to get them to the server. I think I am getting overly frustrated with this, but I have to get this driver installed for any of my scripts to function correctly. Any help would be greatly appreciated!

    Read the article

  • Dovecot (on Mac OS X Server 3 - Mavericks) giving “Error: Failed to autocreate mailbox INBOX: Permission denied”

    - by user2965240
    I recently upgraded my server to Mavericks and I thought everything had gone perfectly. As it turns out, that was not exactly the case. After everything working fine for a week or so, I created a new user and my mail server flat out stopped working. Most frustratingly, there were no log errors (in any of the many mail logs) which shed any light on the cause. After much trial and error, I finally got my mail server functioning (partially) by reinstalling server and restoring the mail folder from the previous day's backup (yay for backups). However, as is often the case, there were MANY permission issues. After slogging through various permission problems, I believe that my system is now receiving mail, however none of my users can check it because every time someone attempts to login the server generates following error: Error: Failed to autocreate mailbox INBOX: Permission denied I would assume that this is yet another permissions problem, however after much searching, I still cannot resolve this. To be clear, I don't want Dovecot to autocreate any mailboxes at this point because all of the mailboxes should exist. Any help on this would be sooooooo greatly appreciated. P.S. On a side note: why is it that repairing permissions never takes care of difficult issues like these? That would be awfully helpful...

    Read the article

  • Migrating to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

    - by Chris
    Ok so here's our setup: We have 2 Windows 2003 Domain Controllers. I am trying to replace them with Windows 2008 R2. The 2003 servers are named DC01 and DC02. The 2008 R2 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller that runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I ran dcpromo on DC1 using the advanced option and added it successfully to my existing domain. It's roles are GC, DNS and Active Directory Domain Services. I transferred The PDC Emulator, RID Pool Manager, and Infrastructure Master roles to DC1. The Schema Master and Domain Naming master are still on DC01. The first issue that I'm encountering is when I dcpromo the DC2 and select "Replicate data over the network from and existing domain controller" I select that I want to replicate from DC1 and I get the following error: Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request. Is this because the Schema Master and Domain Naming Master roles are still on the old DC01? And if so, if I transfer Schema Master and Domain Naming Master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way.

    Read the article

  • MySQL extension of PHP not working

    - by Víctor
    In a Debian server, and after intallation and removal of SquirrelMail (with some downgrade and upgrade of php5, mysql...) the MySQL extension of PHP has stopped working. I have php5-mysql installed, and when I try to connect to a database through php-cli, i connect successfully, but when I try to connect from a web served by Apache I cannot connect. This script, run by php5-cli: echo phpinfo(); $link = mysql_connect('localhost', 'user, 'password'); if (!$link) { die('Could not connect: ' . mysql_error()); } echo 'Connected successfully'; mysql_close($link); Prints the phpinfo, which includes "/etc/php5/cli/conf.d/mysql.ini", and also the MySQL section with all the configuration: SOCKET, LIBS... And then it prints "Connectes successfully". But when run by apache accessed by web browser, it displays the phpinfo, which includes "/etc/php5/apache2/conf.d/mysql.ini", but has the MySQL section missing, and the script dies printing "Fatal error: Call to undefined function mysql_connect()". Note that both "/etc/php5/cli/conf.d/mysql.ini" and "/etc/php5/apache2/conf.d/mysql.ini" are in fact the same configuration, because I have in debian the structure: /etc/php5/apache2 /etc/php5/cgi /etc/php5/cli /etc/php5/conf.d And both point at the same directory: /etc/php5/apache2/conf.d -> ../conf.d /etc/php5/cli -> ../conf.d Where /etc/php5/conf.d/mysql.ini consists of one line: extension=mysql.so So my question is: why is the MySQL extension for PHP not working if I have the configuration included just in the same way as in php-cli, which is working? Thanks a lot!

    Read the article

  • How do I get basic ProxyPass to work on Apache 2.2.17?

    - by Ansis Malins
    I'm trying to get around the ERR_UNSAFE_PORT restriction in Chrome by making Apache reverse proxy other HTTP servers on the machine. I load mod_proxy with sudo e2enmod proxy I add ProxyPass /znc/ http://localhost:6667/ to my httpd.conf I restart Apache with sudo /etc/init.d/apache2 restart When I open up /znc/, I get 500 Internal Server Error. I added LogLevel debug, restarted apache, tried again, and got nothing suspicous: [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 21528 for worker http://localhost:6667/ [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 21528 for (localhost) [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 1 in child 21528 for worker proxy:reverse [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 1 in child 21528 for (*) [Fri Oct 19 18:55:17 2012] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.8 configured -- resuming normal operations [Fri Oct 19 18:55:17 2012] [info] Server built: Feb 14 2012 17:59:20 [Fri Oct 19 18:55:17 2012] [debug] prefork.c(1018): AcceptMutex: sysvsem (default: sysvsem) [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 21532 for worker http://localhost:6667/ [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1837): proxy: worker http://localhost:6667/ already initialized [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 21532 for (localhost) [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 1 in child 21532 for worker proxy:reverse [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 1 in child 21532 for (*) So I'm stumped at this point. What to do? I'm running Ubuntu Server 11.10. ZNC responds with a correct 200 OK and HTML when queried directly both from the local machine and the Internet.

    Read the article

< Previous Page | 735 736 737 738 739 740 741 742 743 744 745 746  | Next Page >