Search Results

Search found 20684 results on 828 pages for 'ad hoc network'.

Page 75/828 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Methods and practices for managing a network that has no internet connection

  - by FaultyJuggler

  Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• Lost network on ubuntu server

  - by user1838473

  I have a virtual machine on Vsphere 5.0 running Ubuntu 12.04 when i put dinamic IP (/etc/network/interfaces) iface eth0 inet dhcp Ubuntu have network and i can do ping to google for example (8.8.8.8) but when i put static IP and configure resolv.conf My interfaces file: auto eth0 iface eth0 inet static address 192.168.1.54 gateway 192.168.1.1 netmask 255.255.255.0 it lost the network and i cant do ping to anything...i dont understand where is the problem... Thanks a lot

  Read the article

• Colliding network addresses

  - by joepd

  A customer is using the same address space as the company network. I need to connect with Cisco VPN Client to the network of the customer, without affecting local connectivity. To keep all working, I connect from a VM to avoid network addressing collisions. This works, but I'm looking for a way to get rid of the VM. Is it possible to connect with Cisco VPN Client 4.8 from Windows 7, without changing the 'normal' routing? How to tell specific applications (most importantly: Putty, VNC, mstsc, psql) to resolve their routes to the VPN instead of the default network interface? Have been hearing about SOCKS-proxies, is that something that could be made to work? I fear that this is a a bit of a crude question, but I'd be happy to specify more details/context.

  Read the article

• AD - Using UserPrincipal.FindByIdentity and PrincipalContext with nested OU - C#

  - by Solid Snake

  Here is what I am trying to achieve: I have a nested OU structure that is about 5 levels deep. OU=Portal,OU=Dev,OU=Apps,OU=Grps,OU=Admin,DC=test,DC=com I am trying to find out if the user has permissions/exists at OU=Portal. Here's a snippet of what I currently have: PrincipalContext domain = new PrincipalContext( ContextType.Domain, "test.com", "OU=Portal,OU=Dev,OU=Apps,OU=Grps,OU=Admin,DC=test,DC=com"); UserPrincipal user = UserPrincipal.FindByIdentity(domain, myusername); PrincipalSearchResult<Principal> group = user.GetAuthorizationGroups(); For some unknown reason, the value user generated from the above code is always null. However, if I were to drop all the OU as follows: PrincipalContext domain = new PrincipalContext( ContextType.Domain, "test.com", "DC=test,DC=com"); UserPrincipal user = UserPrincipal.FindByIdentity(domain, myusername); PrincipalSearchResult<Principal> group = user.GetAuthorizationGroups(); this would work just fine and return me the correct user. I am simply trying to reduce the number of results as opposed to getting everything from AD. Is there anything that I am doing wrong? I've googled for hours and tested various combinations without much luck. Any help is appreciated. Thanks. Dan

  Read the article

• Correct method to search for AD user by email address from .NET

  - by BrianLy

  I'm having some issues with code that is intended to find a user in Active Directory by searching on their email address. I have tried 2 methods but I'm sometimes finding that the FindOne() method will not return any results on some occasions. If I look up the user in the GAL in Outlook I see the SMTP email address listed. My end goal is to confirm that the user exists in AD. I only have the email address as search criteria, so no way to use first or last name. Method 1: Using mail property: DirectorySearcher search = new DirectorySearcher(entry); search.Filter = "(mail=" + email + ")"; search.PropertiesToLoad.Add("mail"); SearchResult result = search.FindOne(); Method 2: proxyAddresses property: DirectorySearcher search = new DirectorySearcher(entry); search.Filter = "(proxyAddresses=SMTP:" + email + ")"; // I've also tried with =smtp: search.PropertiesToLoad.Add("mail"); SearchResult result = search.FindOne(); I've tried changing the case of the email address input but it still does not return a result. Is there a problem here with case sensitivity? If so, what is the best way to resolve it?

  Read the article

• Forms/AD Authentication with Sharepoint

  - by David Lively

  All, I'm configuring Sharepoint to use forms authentication with LDAP/Active Directory. I'm new to Sharepoint, so if this is obvious, please point me in the right direction. Whenever I attempt to log in with a bad account or password, I get the very friendly (and correct) error message, The server could not sign you in. Make sure your user name and password are correct, and then try again. ... which implies that Sharepoint is able to communicate with AD. If I log in with a valid account, I get a page that says: (I added the grey bar to cover up the login name) Any suggestions? The account I'm logging in with is an administrator and has been granted full control in central administration. Also, interesting note: If I click the "sign in as a different user" link, and attempt to sign in using with the same credentials I just used, the site just redirects back to the login page, with no error or status message. If I then manually enter the site url, it again shows the "Error: Access Denied" page. Argh.

  Read the article

• Redirect network logs from syslog to another file

  - by w0rldart

  I keep logging way to much info (not needed, for now) in my syslog, and not daily or hourly... but instant. If I want to watch for something in my syslog I just can't because the network log keeps interfering. So, how can I redirect network logs to another file and/or stop logging it? Dec 10 17:01:33 user kernel: [ 8716.000587] MediaState is connected Dec 10 17:01:33 user kernel: [ 8716.000599] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:33 user kernel: [ 8716.000601] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:33 user kernel: [ 8716.000612] rt28xx_get_wireless_stats ---> Dec 10 17:01:33 user kernel: [ 8716.000615] <--- rt28xx_get_wireless_stats Dec 10 17:01:39 user kernel: [ 8722.000714] MediaState is connected Dec 10 17:01:39 user kernel: [ 8722.000729] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:39 user kernel: [ 8722.000732] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:39 user kernel: [ 8722.000747] rt28xx_get_wireless_stats ---> Dec 10 17:01:39 user kernel: [ 8722.000751] <--- rt28xx_get_wireless_stats Dec 10 17:01:44 user kernel: [ 8726.904025] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:01:45 user kernel: [ 8728.003138] MediaState is connected Dec 10 17:01:45 user kernel: [ 8728.003153] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:45 user kernel: [ 8728.003157] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:45 user kernel: [ 8728.003171] rt28xx_get_wireless_stats ---> Dec 10 17:01:45 user kernel: [ 8728.003175] <--- rt28xx_get_wireless_stats Dec 10 17:01:51 user kernel: [ 8734.004066] MediaState is connected Dec 10 17:01:51 user kernel: [ 8734.004079] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:51 user kernel: [ 8734.004082] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:51 user kernel: [ 8734.004096] rt28xx_get_wireless_stats ---> Dec 10 17:01:51 user kernel: [ 8734.004099] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.004108] MediaState is connected Dec 10 17:01:57 user kernel: [ 8740.004119] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:57 user kernel: [ 8740.004121] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:57 user kernel: [ 8740.004132] rt28xx_get_wireless_stats ---> Dec 10 17:01:57 user kernel: [ 8740.004135] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.436021] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:03 user kernel: [ 8746.005280] MediaState is connected Dec 10 17:02:03 user kernel: [ 8746.005294] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:03 user kernel: [ 8746.005298] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:03 user kernel: [ 8746.005312] rt28xx_get_wireless_stats ---> Dec 10 17:02:03 user kernel: [ 8746.005315] <--- rt28xx_get_wireless_stats Dec 10 17:02:09 user kernel: [ 8752.004790] MediaState is connected Dec 10 17:02:09 user kernel: [ 8752.004804] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:09 user kernel: [ 8752.004808] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:09 user kernel: [ 8752.004821] rt28xx_get_wireless_stats ---> Dec 10 17:02:09 user kernel: [ 8752.004825] <--- rt28xx_get_wireless_stats Dec 10 17:02:15 user kernel: [ 8757.984031] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:15 user kernel: [ 8758.004078] MediaState is connected Dec 10 17:02:15 user kernel: [ 8758.004094] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:15 user kernel: [ 8758.004097] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:15 user kernel: [ 8758.004112] rt28xx_get_wireless_stats ---> Dec 10 17:02:15 user kernel: [ 8758.004116] <--- rt28xx_get_wireless_stats Dec 10 17:02:16 user kernel: [ 8759.492017] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:19 user kernel: [ 8762.002179] SCANNING, suspend MSDU transmission ... Dec 10 17:02:19 user kernel: [ 8762.004291] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:19 user kernel: [ 8762.025055] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:19 user kernel: [ 8762.027249] RT35xx: SwitchChannel#1(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.170206] RT35xx: SwitchChannel#2(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.318211] RT35xx: SwitchChannel#3(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.462269] RT35xx: SwitchChannel#4(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.606229] RT35xx: SwitchChannel#5(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.750202] RT35xx: SwitchChannel#6(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x07, R=0x02 Dec 10 17:02:20 user kernel: [ 8762.894217] RT35xx: SwitchChannel#7(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.038202] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.040194] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.040199] BAR(1) : Tid (0) - 03a3:037e Dec 10 17:02:20 user kernel: [ 8763.040387] SYNC - End of SCAN, restore to channel 11, Total BSS[03] Dec 10 17:02:20 user kernel: [ 8763.040400] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:20 user kernel: [ 8763.040402] bFastRoamingScan ~~~~~~~~~~~~~ Get back to send data ~~~~~~~~~~~~~ Dec 10 17:02:20 user kernel: [ 8763.040405] SCAN done, resume MSDU transmission ... Dec 10 17:02:20 user kernel: [ 8763.047022] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.047026] BAR(1) : Tid (0) - 03a3:03a5 Dec 10 17:02:21 user kernel: [ 8763.898130] bImprovedScan ............. Resume for bImprovedScan, SCAN_PENDING .............. Dec 10 17:02:21 user kernel: [ 8763.898143] SCANNING, suspend MSDU transmission ... Dec 10 17:02:21 user kernel: [ 8763.900245] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:21 user kernel: [ 8763.921144] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:21 user kernel: [ 8763.923339] RT35xx: SwitchChannel#8(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8763.996019] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:21 user kernel: [ 8764.066221] RT35xx: SwitchChannel#9(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.210212] RT35xx: SwitchChannel#10(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.215536] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.215542] BAR(1) : Tid (0) - 0457:0452 Dec 10 17:02:21 user kernel: [ 8764.244000] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.244004] BAR(1) : Tid (0) - 0459:0456 Dec 10 17:02:21 user kernel: [ 8764.253019] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.253023] BAR(1) : Tid (0) - 045c:0458 Dec 10 17:02:21 user kernel: [ 8764.256677] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.256681] BAR(1) : Tid (0) - 045c:045b Dec 10 17:02:21 user kernel: [ 8764.259785] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.259788] BAR(1) : Tid (0) - 045d:045b Dec 10 17:02:21 user kernel: [ 8764.280467] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.280471] BAR(1) : Tid (0) - 045f:045c Dec 10 17:02:21 user kernel: [ 8764.282189] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.282192] BAR(1) : Tid (0) - 045f:045e Dec 10 17:02:21 user kernel: [ 8764.354204] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.356408] ScanNextChannel():Send PWA NullData frame to notify the associated AP! Dec 10 17:02:21 user kernel: [ 8764.498202] RT35xx: SwitchChannel#12(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.642210] RT35xx: SwitchChannel#13(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF7, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.790229] RT35xx: SwitchChannel#14(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF8, K=0x04, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.934238] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.935243] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.935249] BAR(1) : Tid (0) - 048e:0485 Dec 10 17:02:22 user kernel: [ 8764.936423] SYNC - End of SCAN, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.936436] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:22 user kernel: [ 8764.936440] SCAN done, resume MSDU transmission ... Dec 10 17:02:22 user kernel: [ 8764.940529] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.942178] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.942182] BAR(1) : Tid (0) - 0493:048e Dec 10 17:02:22 user kernel: [ 8764.942715] CNTL - All roaming failed, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.948016] MMCHK - No BEACON. restore R66 to the low bound(56) Dec 10 17:02:22 user kernel: [ 8764.948307] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 1111 Dec 10 17:02:23 user kernel: [ 8766.048073] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:23 user kernel: [ 8766.552034] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:27 user kernel: [ 8770.001180] MediaState is connected Dec 10 17:02:27 user kernel: [ 8770.001197] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:27 user kernel: [ 8770.001201] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:27 user kernel: [ 8770.001219] rt28xx_get_wireless_stats ---> Dec 10 17:02:27 user kernel: [ 8770.001223] <--- rt28xx_get_wireless_stats Dec 10 17:02:28 user kernel: [ 8771.564020] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:29 user kernel: [ 8772.064031] QuickDRS: TxTotalCnt <= 15, train back to original rate

  Read the article

• Error 0x6ba (RPC server is unavailable) when running sfc /scannow on Windows XP in Safe Mode

  - by leeand00

  I think that my mup.sys file is corrupt. I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows XP box: No network provider accepted the given network path. After reading this I attempted to follow the directions by rebooting my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. When I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode What can I do about this? If it can't find the Remote Procedure Call service in safe mode?

  Read the article

• Running sfc /scannow provides the error The specific error code is 0x000006ba [The RPC server is una

  - by leeand00

  I think that my mup.sys file is corrupted, I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows xp box: No network provider accepted the given network path. After reading this I attempted to follow the directions by entering my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. Additionally when I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode So what can I do about this exactly? If it can't find the Remote Procedure Call service in safe mode?

  Read the article

• Flash in browsers does not play sound accurately using Pulse network audio

  - by Dave M G

  I use PulseAudio to send sound over the LAN to an audio server. When playing any Flash media in Firefox or Chrome, the sound flutters, as if the volume were going up and down every second. The problem does not exhibit with any other software, and I think it's specific to how Flash interacts with my sound set up. How do I get Flash to play nice with the PulseAudio network sound server? Update I have discovered that I can stop the sound fluttering if I follow these steps: Start a Flash video Run pulseaudio --kill on the server Wait about 7 seconds After this, the PulseAudio server automatically respawns, and the sound in the Flash video is perfect. The problem now, though, is that I have to do this every time I start a Flash video. This is obviously not desireable. So, the question is, how do I make whatever it is that makes the sound work when I go through these steps stick so that I don't have to do them? Also, I've uploaded some PulseAudio log output to Pastebin, taken while attempting to play a Flash video, if that helps. I've tried to get logging details from Flash, but despite installing and enabling Flash for debugging, it has not generated any ouput at all. Details I have uploaded an example video of the problem onto Youtube. In the video you can see the opening of a Ted Talk video, and the sound flutters as it plays. The video also stutters while playing back. Here are my sound device output settings:

  Read the article

• L2TP connection fails!

  - by a.toraby

  I've installed l2tp-ipsec-vpn but when I try to connect to the vpn server I get error 500. Here are the logs: Jun 17 12:54:37.449 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:54:38.858 Stopping xl2tpd: xl2tpd. Jun 17 12:54:38.859 xl2tpd[1511]: death_handler: Fatal signal 15 received Jun 17 12:54:38.872 ipsec_setup: Starting Openswan IPsec U2.6.37/K3.2.0-23-generic... Jun 17 12:54:39.027 ipsec__plutorun: Starting Pluto subsystem... Jun 17 12:54:39.033 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Jun 17 12:54:39.037 recvref[30]: Protocol not available Jun 17 12:54:39.038 xl2tpd[2442]: This binary does not support kernel L2TP. Jun 17 12:54:39.038 xl2tpd[2444]: xl2tpd version xl2tpd-1.3.1 started on atp-ThinkPad-SL410 PID:2444 Jun 17 12:54:39.038 xl2tpd[2444]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. Jun 17 12:54:39.038 xl2tpd[2444]: Forked by Scott Balmos and David Stipp, (C) 2001 Jun 17 12:54:39.038 xl2tpd[2444]: Inherited by Jeff McAdams, (C) 2002 Jun 17 12:54:39.039 xl2tpd[2444]: Forked again by Xelerance (www.xelerance.com) (C) 2006 Jun 17 12:54:39.039 xl2tpd[2444]: Listening on IP address 0.0.0.0, port 1701 Jun 17 12:54:39.040 Starting xl2tpd: xl2tpd. Jun 17 12:54:39.062 ipsec__plutorun: 002 added connection description "L2TP" Jun 17 12:55:30.753 104 "L2TP" #1: STATE_MAIN_I1: initiate Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 20s for response Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 40s for response Jun 17 12:55:30.754 003 "L2TP" #1: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008] Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [RFC 3947] method set to=109 Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [FRAGMENTATION] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [IKE CGA version 1] Jun 17 12:55:30.755 106 "L2TP" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Jun 17 12:55:30.755 010 "L2TP" #1: STATE_MAIN_I2: retransmission; will wait 20s for response Jun 17 12:55:30.755 003 "L2TP" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Jun 17 12:55:30.755 108 "L2TP" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Jun 17 12:55:30.756 004 "L2TP" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Jun 17 12:55:30.756 117 "L2TP" #2: STATE_QUICK_I1: initiate Jun 17 12:55:30.756 010 "L2TP" #2: STATE_QUICK_I1: retransmission; will wait 20s for response Jun 17 12:55:30.756 003 "L2TP" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME msgid=6b03ff69 Jun 17 12:55:30.756 003 "L2TP" #2: NAT-Traversal: received 2 NAT-OA. ignored because peer is not NATed Jun 17 12:55:30.756 003 "L2TP" #2: our client subnet returned doesn't match my proposal - us:192.168.1.3/32 vs them:109.162.174.235/32 Jun 17 12:55:30.757 003 "L2TP" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL] Jun 17 12:55:30.757 004 "L2TP" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x23af21f8 <0xdb4a87b6 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Jun 17 12:55:31.759 xl2tpd[2444]: Connecting to host x.x.x.x, port 1701 Jun 17 12:55:32.021 xl2tpd[2444]: Connection established to x.x.x.x, 1701. Local: 4720, Remote: 200 (ref=0/0). Jun 17 12:55:32.023 xl2tpd[2444]: Calling on tunnel 4720 Jun 17 12:55:32.454 xl2tpd[2444]: Call established with x.x.x.x, Local: 9667, Remote: 3, Serial: 1 (ref=0/0) Jun 17 12:55:32.456 xl2tpd[2444]: start_pppd: I'm running: Jun 17 12:55:32.456 xl2tpd[2444]: "/usr/sbin/pppd" Jun 17 12:55:32.457 xl2tpd[2444]: "passive" Jun 17 12:55:32.458 xl2tpd[2444]: "nodetach" Jun 17 12:55:32.458 xl2tpd[2444]: ":" Jun 17 12:55:32.459 xl2tpd[2444]: "file" Jun 17 12:55:32.459 xl2tpd[2444]: "/etc/ppp/L2TP.options.xl2tpd" Jun 17 12:55:32.460 xl2tpd[2444]: "ipparam" Jun 17 12:55:32.461 xl2tpd[2444]: "x.x.x.x" Jun 17 12:55:32.462 xl2tpd[2444]: "/dev/pts/1" Jun 17 12:55:32.583 pppd[2711]: Plugin passprompt.so loaded. Jun 17 12:55:32.583 pppd[2711]: pppd 2.4.5 started by root, uid 0 Jun 17 12:55:32.619 pppd[2711]: Using interface ppp0 Jun 17 12:55:32.620 pppd[2711]: Connect: ppp0 <--> /dev/pts/1 Jun 17 12:55:33.693 pppd[2711]: /usr/bin/L2tpIPsecVpn exited with code 0 Jun 17 12:55:34.454 [ERROR 404] Authentication failed: closing connection to 'L2TP' Jun 17 12:55:34.456 pppd[2711]: MS-CHAP authentication failed: E=691 Authentication failure Jun 17 12:55:34.457 pppd[2711]: CHAP authentication failed Jun 17 12:55:34.461 Stopping xl2tpd: xl2tpd. Jun 17 12:55:34.462 xl2tpd[2444]: death_handler: Fatal signal 15 received Jun 17 12:55:34.463 pppd[2711]: Modem hangup Jun 17 12:55:34.463 pppd[2711]: Connection terminated. Jun 17 12:55:34.474 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:55:34.482 pppd[2711]: Exit. Jun 17 12:55:35.587 ipsec_setup: ERROR: Module xfrm4_mode_transport is in use Jun 17 12:55:35.665 ipsec_setup: ERROR: Module esp4 is in use I had this problem by ubuntu 11.10 though I can easily connect to the server from windows. I use ubuntu 12.0 64bit

  Read the article

• Social Network Updates: While You Were Busy Marketing 2

  - by Mike Stiles

  Since social moves at the speed of data, it’s already time for another update, as we did back in April, on the changes the various social networks have made or gone through while you were busy marketing. Facebook There’s a lot of talk Facebook’s developing a mobile product to act like Flipboard and surface news, from both users and media outlets. The biggest news was Facebook/Instagram’s introduction of 15-second videos, enhanced with with filters, to take some of Vine’s candy. You can also delete parts of videos and rerecord them, and there’s image stabilization. Facebook’s ad revenue is coming along just fine, thank you very much. 35% quarter-to-quarter growth in Q2. And it looks like new formats like Mobile App Install Ads and Unpublished Page Posts are adding to the mix. If you don’t already, you’ll soon see a little camera in comment boxes letting you insert photos right into the comments you make. The drive toward “more visual” continues. The other big news is Facebook’s adoption of our Twitter friend, the hashtag. Adding # sets apart the post topic so it can be easily found or discovered. It’s also being added to Google Plus, Tumblr, and Pinterest. Twitter Want to send someone a promoted tweet when they’re in range of your store? That could be happening by the end of this year. Some users have been seeing automatic in-stream previews of images on Twitter.com. Right now it’s images in your own tweets, but we can assume all tweets are next. Get your followers organized! Twitter raised the limit on the number of lists you can create from 20 to 1,000. They also raised the number of accounts you can have in a list from 500 to 5,000. Twitter started notifying you when someone favorites a tweet you’re mentioned in or re-tweets a tweet you re-tweeted. Anyway, it’s the first time Twitter’s notified you about indirect interactions like that. Who’s afraid of Instagram? A study shows 6-second Vine videos are being posted to Twitter at the rate of 9/second, up from 5/second 2 months ago. Vine has over 13 million users and branded Vines are 4x more likely to be shared than video ads. Google Plus Now featuring a 3-column redesigned stream, and images that take up a whole column. And photo filters Auto Highlight and Auto Awesome work to turn your photos into a real show. Google Hangouts is the workhorse for all Google messaging now, it’s not just an online chat with 9 people anymore. Google Plus Dashboard improves the connection between your company’s Google Plus business page and your Google Plus Local. Updates go out across all Google properties and you can do your managing from the dashboard. With Google Plus’ authorship system, you can build “Author Rank” based on what you write and put on the web. If your stuff is +1’ed and shared a lot, you’re the real deal and there are search result benefits. LinkedIn "Who's Viewed Your Updates" shows you what you’ve shared recently, who saw it and what they did about it in real-time. “Influencers” is, well, influential. Traffic to all LI news products has gone up 8x since it was introduced. LinkedIn is quickly figuring out how to get users to stick around awhile. You and your brand can post images and documents in status updates now. In fact, that whole “document posting” thing is making some analysts wonder if LinkedIn will drift on over to the Dropboxes and YouSendIts of the world. C’mon, admit it. Your favorite part of LinkedIn is being able to see who’s viewed your profile. Now you’ve got even more info and can see what/who you have in common. Premium users get even deeper insights about how people are finding them. If you’re a big fan of security, you’ll love that LinkedIn started offering two-factor authentication (2FA). It’s optional, but step 2 is a one-time code texted to your registered mobile. Pinterest A study showed pins have a looong shelf life compared to other social net posts. “Clicks kept coming for 30 days and beyond.” Most pins are timeless, and the infinite scroll causes people to see older pins. Is it a keeper? Pinterest jumped 82% to 54 million users in the past year. It’s valued at $2.5 billion and is one of the biggest sources of referral traffic there is. That said, CEO Ben Silbermann adds, "Right now, we don't make money." A new search feature stops you from having to endlessly scroll through your own pins looking for that waterfall picture you posted. Simply select “just my pins” in the search bar. New "Rich Pins" lets brands add info like price and availability to pins that can be updated daily via a data feed from your merchant site. Not so fast, you have to apply to Pinterest for it first. Like other social nets, Pinterest does not allow sexual content, nudity, or even partial nudity. However…some art contains nudity, and Pinterest wants to allow art. What constitutes “art” will be judged by…what we have to assume are Pinterest employees who love their job. @mikestilesPhoto: stock.xchng, Tim Marmon

  Read the article

• Week 24: Karate Kid Chops, The A-Team Runs, and the OPN Team Delivers

  - by sandra.haan

  The 80's called and they want their movies back. With the summer line-up of movies reminding us to wax on and wax off one can start to wonder if there is anything new to look forward to this summer. The OPN Team is happy to report that - yes - there is. As Hannibal would say "I love it when a plan comes together"! And a plan we have; for the past 2 months we've been working to pull together the FY11 Oracle PartnerNetwork Kickoff. Listen in as Judson tells you more. While we can't offer you Bradley Cooper or Jackie Chan we can promise you an exciting line-up of guests including Safra Catz and Charles Phillips. With no lines to wait in or the annoyingly tall guy sitting in front of you this might just be the best thing you see all summer. Register now & Happy New Year, The OPN Communications Team

  Read the article

• Content Catalog for Oracle OpenWorld is Ready

  - by Rick Ramsey

  American Major League Baseball Umpire Jim Joyce made one of the worst calls in baseball history when he ruled Jason Donald safe at First in Wednesday's game between the Detroit Lions and the Cleveland Indians. The New York Times tells the story well. It was the 9th inning. There were two outs. And Detroit Tiger's pitcher Armando Galarraga had pitched a perfect game. Instead of becoming the 21st pitcher in Major League Baseball history to pitch a perfect game, Galarraga became the 10th pitcher in Major League Baseball history to ever lose a perfect game with two outs in the ninth inning. More insight from the New York Times here. You can avoid a similar mistake and its attendant death treats, hate mail, and self-loathing by studying the Content Catalog just released for Oracle Open World, Java One, and Oracle Develop conferences being held in San Francisco September 19-23. The Content Catalog displays all the available content related to the event, the venue, and the stream or track you're interested in. Additional filters are available to narrow down your results even more. It's simple to use and a big help. Give it a try. It'll spare you the fate of Jim Joyce. - Rick

  Read the article

• Solarwinds SDK/customisation

  - by Shane

  Hi, Sorry if this is the wrong place to post, but it is a hybrid serverfault/stackoverflow question. I've been directed to take a look at Solarwinds, which is an excellent network monitoring solution, for an internal project. Basically we want to write our own panel to display information custom to our network infrastructure. Has anyone done anything like this, or know if there is a plugin SDK giving developer access? [edit:] Also, if anyone knows of any other Solarwinds-type open source network solutions, please let me know. Cheers, Shane

  Read the article

• Multiplayer / Networking options for a 2D game with physics

  - by lahmas

  Summary: My 50% finished 2D sidescroller with Box2D as physics engine should have multiplayer support in the final version. However, the current code is just a singleplayer game. What should I do now? And more important, how should I implement multiplayer and combine it with singleplayer? Is it a bad idea to code the singleplayer mode separated from multiplayer mode (like Notch did it with Minecraft)? The performance in singleplayer should be as good as possible (Simulating physics with using a loopback server to implement singleplayer mode would be a problem there) Full background / questions: I'm working on a relatively large 2D game project in C++, with physics as a core element of it. (I use Box2D for that) The finished game should have full multiplayer support, however I made the mistake that I didn't plan the networking part properly and basically worked on a singleplayer game until now. I thought that multiplayer support could be added to the almost finished singleplayer game in a relatively easy and clear way, but apparently, from what I have read this is wrong. I even read that a multiplayer game should be programmed as one from the beginning, with the singleplayer mode actually just consisting of hosting an invisible local server and connecting to it via loopback. (I found out that most FPS game engines do it that way, an example would be Source) So here I am, with my half finished 2D sidescroller game, and I don't really know how to go on. Simply continueing to work on the singleplayer / client seems useless to me now, as I'd have to recode and refactor even more later. First, a general question to anybody who possibly found himself in a situation like this: How should I proceed? Then, the more specific one - I have been trying to find out how I can approach the networking part for my game: (Possible solutions:) Invisible / loopback server for singleplayer This would have the advantage that there basically is no difference between singleplayer and multiplayer mode. Not much additional code would be needed. A big disadvantage: Performance and other limitations in singleplayer. There would be two physics simulations running. One for the client and one for the loopback server. Even if you work around by providing a direct path for the data from the loopback server, through direct communcation by the threads for example, the singleplayer would be limited. This is a problem because people should be allowed to play around with masses of objects at once. Separated singleplayer / Multiplayer mode There would be no server involved in singleplayer mode. I'm not really sure how this would work. But at least I think that there would be a lot of additional work, because all of the singleplayer features would have to be re-implemented or glued to multiplayer mode. Multiplayer mode as a module for singleplayer This is merely a quick thought I had. Multiplayer could consist of a singleplayer game, with an additional networking module loaded and connected to a server, which sends and receives data and updates the singleplayer world. In the retrospective, I regret not having planned the multiplayer mode earlier. I'm really stuck at this point and I hope that somebody here is able to help me!

  Read the article

• Shutdown Hangs for 5 Minutes on Kubuntu 14.04

  - by Augustinus

  I've had persistent problems with a 5 minute hang at shutdown for the last three versions of Kubuntu (13.04, 13.10, and now 14.04). I suspect this is not a KDE-specific problem. Recently, I performed a fresh installation of Kubuntu 14.04 from a live-USB, and shutdown worked normally for about a week. The hang-up is now happening again, and I can't figure out why. A brief description of the problem: The hang-up occurs with all methods of initiating a normal shutdown: Clicking the shutdown or restart button in KDE, sudo shutdown -h now, sudo reboot The shutdown splash screen appears. Using the down-arrow to access verbose messages, I see "Asking all remaining processes to terminate." This message remains for 5 minutes with no disk activity. Finally, a rapid series of messages flurries to the screen: * All processes ended within 300 seconds... [ OK ] nm-dispatcher.action: Caught signal 15, shutting down... ModemManager[852]: <warn> Could not acquire the 'org.freedesktop.ModemManager1' service name ModemManager[852]: <info> ModemManager is shut down * Deactivating swap... [ OK ] * Unmounting local filesystems... [ OK ] * Will now restart` Possible Sources of the Problem: Before the problem re-appeared, I have mainly been doing routine computing. I have kept the system up-to-date using apt-get upgrade and apt-get dist-upgrade. The only other notable incident was a power failure. I do not have the computer connected to a UPS, so the power failure resulted in an immediate shutdown. Could this have corrupted an important file which must be accessed at shutdown? Is there any way that could cause a 5-minute hang-up? Here is a list of packages that have been updated before the problem appeared: bash iotop dpkg dpkg-dev python3-software-properties libdpkg-perl software-properties-kde software-properties-common akonadi-backend-mysql libakonadiprotocolinternals1 akonadi-server firefox-locale-en firefox flashplugin-installer libqapt2 libqapt2-runtime thunderbird openjdk-7-jre-headless thunderbird-locale-en kubuntu-driver-manager qapt-deb-installer openjdk-7-jre qapt-batch icedtea-7-jre-jamvm libelf1 dpkg dpkg-dev libdpkg-perl libjbig0 gettext-base libgettextpo-dev libssl1.0.0 libgettextpo0 libasprintf-dev linux-headers-3.13.0-24 gettext libasprintf0c2 linux-headers-3.13.0-24-generic openssl linux-libc-dev gstreamer0.10-qapt kubuntu-desktop linux-image-extra-3.13.0-24-generic linux-image-3.13.0-24-generic I would appreciate any help with this.

  Read the article

• My laptop can not access internet after setup bridge with wired NIC and wireless NIC

  - by Victor S

  I setup a bridge using wired NIC and wireless NIC in order to make wireless NIC as a Wi-Fi AP to share wired internet access, after setup successfully, the Wi-Fi AP works as my expectation, but my laptop can not access internet, please give me a hand. Thanks. My hostapd.conf $ cat hostapd.conf interface=wlan0 bridge=br0 driver=nl80211 ssid=myAP hw_mode=g channel=11 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=3 ieee80211n=0 wpa=3 wpa_passphrase=PassWord wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP Setup steps: $ sudo killall hostapd hostapd: no process found $ sudo hostapd -B hostapd.conf Configuration file: hostapd.conf Using interface wlan0 with hwaddr 00:26:5e:e8:4f:8e and ssid 'myAP' $ sudo brctl addbr br0 device br0 already exists; can't create bridge with the same name $ sudo ifconfig eth0 0.0.0.0 up $ sudo ifconfig wlan0 0.0.0.0 up $ sudo brctl addif br0 eth0 $ sudo brctl addif br0 wlan0 device wlan0 is already a member of a bridge; can't enslave it to bridge br0. $ sudo ifconfig br0 192.168.1.110 netmask 255.255.255.0 $ sudo route add default gw 192.168.1.1

  Read the article

• Oracle Technology Network Virtual Developer Day: Service Oriented Architecture (SOA)

  - by programmarketingOTN

  Register now! Oracle Technology Network Virtual Developer Day: Service Oriented Architecture (SOA) - Discover the Power of Oracle SOA Suite 11gTuesday July 12, 2011 - ?9:00 a.m. PT – 1:30 p.m. PT / 12 Noon EDT - 4:30 p.m. EDTOTN is proud to host another Virtual Developer Day, this time focusing on SOA (click here to check out on-demand version of Rich Enterprise Applications and WebLogic)  Save yourself/company some money and join us online for this hands-on virtual workshop. Through developer-focused product presentations and demonstrations delivered by Oracle product and technology experts, there is no faster or more efficient way to jumpstart your Oracle SOA suite learning.Over the course of the Virtual Developer Day, you will learn how an SOA approach can be implemented, whether starting fresh with new services or reusing existing services. Using Oracle SOA Suite 11g components, you will explore, modify, execute, and monitor an SOA composite application. Topics include SCA, BPEL process execution, adapters, business rules and more.Java and WebLogic experience not required for the presentations or demonstrations but it is a plus for the hands-on lab.Come to this event if you are    •    Exploring ways to deliver services faster    •    Integrating packaged and/or legacy applications    •    Developing service orchestration    •    Planning or starting new development projectsRegister online now for this FREE event.AGENDA - Tuesday July 12, 2011?9:00 a.m. PT – 1:30 p.m. PT / 12 Noon EDT - 4:30 p.m. PT EDT  Time  Title  9:00 AM Keynote  9:15 AM Presentation 1 Service Oriented Architecture (SOA) Overview  9:45 AM Demonstration 1 Mediator and Adapters  10:15 AM Presentation 2 BPEL Service Orchestration and Business Rules  10:45 AM Demonstration 2 BPEL Service Orchestration  11:15 AM Demonstration 3 Oracle Business Rules  11:45 AM Hands-on Lab time  1:30 PM Close Register online now for this FREE event.

  Read the article

• nm-applet missing after installing ubuntu under virtualbox

  - by Jonas

  After installing Ubuntu under VirtualBox the nm-applet is missing. I already tried to restart the applet but nothing has happened. Any suggestions? jonas@jonas-laptop:~$ kill nm-applet bash: kill: nm-applet: arguments must be process or job IDs jonas@jonas-laptop:~$ kill 2649 jonas@jonas-laptop:~$ sudo nm-applet ** (nm-applet:2740): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: The name org.freedesktop.NetworkManager was not provided by any .service files ** Message: applet now removed from the notification area ** (nm-applet:2740): WARNING **: Failed to register as an agent: (2) The name org.freedesktop.NetworkManager was not provided by any .service files ** Message: using fallback from indicator to GtkStatusIcon (nm-applet:2740): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width > 0' failed ** Message: Starting applet secret agent because GNOME Shell disappeared ** (nm-applet:2740): WARNING **: Failed to register as an agent: (2) The name org.freedesktop.NetworkManager was not provided by any .service files Thanks for the suggestions .

  Read the article

• How to monitor current output/receive queue length in Linux

  - by IZhen

  I want to check the capacity and performance of my network. Besides checking the txkB/s and rxkB/s via Sar, I'd also like to see the average queue length of the network interface(so that the average queueing time in the interface can be calculated). It seems that netstat can give a per socket queue length, is it possible to get a per interface statics(a bit like Network Interface\Output Queue Length in Windows)? A related and kind of reverse questions is How do I view the TCP Send and Receive Queue sizes on Windows? Thanks

  Read the article

• Sharing laptop's internal optical drive running windows XP Media Center Edition with Netbook running

  - by Col

  just got a new HP netbook with no optical drive and guide said I should be able to share the optical drive of another windows computer. The netbook is running Windows 7 and the laptop, also HP, with the internal optical drive is running Windows XP Media Center Edition. I have wireless network that both the laptop and netbook access without a problem. The instructions did not seem to work in my case. When I right clicked on Properties of the optical drive and went to the Sharing tab, there was no selction for Advanced Sharing as the instructions said. XP made me go to Network wizard and set up a network, (which I already had). After doing that I could not access the drive from Windows 7. Has anyone benn able to do this?

  Read the article

• Cannot start tor with vidalia, failed to bind listening port because of tor-socks running

  - by ganjan

  I get these errors trying to run tor with vidalia Apr 19 21:55:15.371 [Notice] Tor v0.2.1.30. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686) Apr 19 21:55:15.372 [Notice] Initialized libevent version 1.4.13-stable using method epoll. Good. Apr 19 21:55:15.373 [Notice] Opening Socks listener on 127.0.0.1:9050 Apr 19 21:55:15.373 [Warning] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Apr 19 21:55:15.373 [Warning] Failed to parse/validate config: Failed to bind one of the listener ports. Apr 19 21:55:15.373 [Error] Reading config failed--see warnings above. I don't think tor is running. Here is a nmap scan of my localhost Starting Nmap 5.21 ( http://nmap.org ) at 2011-04-19 21:59 CEST Nmap scan report for localhost (127.0.0.1) Host is up (0.0000050s latency). Hostname localhost resolves to 2 IPs. Only scanned 127.0.0.1 rDNS record for 127.0.0.1: localhost.localdomain Not shown: 989 closed ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain 80/tcp open http 139/tcp open netbios-ssn 445/tcp open microsoft-ds 631/tcp open ipp 3128/tcp open squid-http 3306/tcp open mysql 9000/tcp open cslistener 9050/tcp open tor-socks 10000/tcp open snet-sensor-mgmt I see tor-socks is running here, probably be the cause of the problem. How do I stop this from starting up? I want to use vidalia so I can monitor whats going on.

  Read the article

• cannot delete IPv6 default gateway

  - by NulledPointer

  The commands below should be pretty self-explanatory. Please note that the route for which i get failure is obtained by RA and has very less expiry ( e Flag in UDAe). @vm:~$ ip -6 route 2001:4860:4001:800::1002 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1003 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1005 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:803::100e via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 fd00:ffff:ffff:fff1::/64 dev eth1 proto kernel metric 256 expires 2592300sec fe80::/64 dev eth1 proto kernel metric 256 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto kernel metric 1024 expires 1776sec @vm:~$ @vm:~$ @vm:~$ @vm:~$ sudo route -6 delete default gw fe80::20c:29ff:fe87:f9e7 @vm:~$ ip -6 route 2001:4860:4001:800::1002 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1003 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1005 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:803::100e via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 fd00:ffff:ffff:fff1::/64 dev eth1 proto kernel metric 256 expires 2592279sec fe80::/64 dev eth1 proto kernel metric 256 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto kernel metric 1024 expires 1755sec @vm:~$ @vm:~$ @vm:~$ sudo route -6 delete ::/0 gw fe80::20c:29ff:fe87:f9e7 dev eth1 SIOCDELRT: No such process @vm:~$ @vm:~$ @vm:~$ route -n6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2001:4860:4001:800::1002/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:800::1003/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:800::1005/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:803::100e/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 fd00:ffff:ffff:fff1::/64 :: UAe 256 0 0 eth1 fe80::/64 :: U 256 0 0 eth1 ::/0 fe80::20c:29ff:fe87:f9e7 UGDAe 1024 0 0 eth1 ::/0 :: !n -1 1 349 lo ::1/128 :: Un 0 1 3 lo fd00:ffff:ffff:fff1:a00:27ff:fe7f:7245/128 :: Un 0 1 0 lo fd00:ffff:ffff:fff1:fce8:ce07:b9ea:389f/128 :: Un 0 1 0 lo fe80::a00:27ff:fe7f:7245/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth1 ::/0 :: !n -1 1 349 lo @vm:~$ UPDATE: Another question is whats the use of link local address as the default route?

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >