Search Results

Search found 13584 results on 544 pages for 'digital root'.

Page 75/544 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82 | Next Page >

Ubuntu 11.04 does not detect my tata photon +

- by nikhil

I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

Read the article
How to start/stop iptables in Ubuntu 12.04?

- by imwrng

I am using Ubuntu 12.04 . while learning some new things about iptables i cant through this . see at the image . while i am trying to start ,its saying as root@badfox:~# iptables -L -n -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination root@badfox:~# service iptables stop iptables: unrecognized service root@badfox:~# service iptables start iptables: unrecognized service Source: http://www.cyberciti.biz/tips/linux-iptables-examples.html Why i am getting like this ? EDIT: So my firewall already started but why i am not getting the output as i mentioned in the link at source link in first workout. . Here is my output root@badfox:~# sudo start ufw start: Job is already running: ufw root@badfox:~# iptables -L -n -v Chain INPUT (policy ACCEPT 4882 packets, 2486K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 5500 packets, 873K bytes) pkts bytes target prot opt in out source destination root@badfox:~#

Read the article
Touchpad right click doesn't work on HP Envy 14 beats

- by jdrageme01

I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

Read the article
Where does the YouTube video files stored on system nowadays?

- by souravc

When I open a youtube video with firefox I could not find any video file inside ~/.mozilla/firefox/<some_string>.default/Cache/. I also tried with google-chrome like, ps ax | grep flash ls -l /proc/[*PID*]/fd | grep Flash But again /proc/[*PID*]/fd does not have any video like file. ls -l /proc/[*PID*]/fd have some results like lrwx------ 1 root root 64 Nov 9 12:18 22 -> /run/shm/.com.google.Chrome.eOsHNu (deleted) lrwx------ 1 root root 64 Nov 9 12:18 23 -> /run/shm/.com.google.Chrome.p8h6BL (deleted) Result of ls -l /proc/[*PID*]/fd | grep Flash for some videos from other site is like lrwx------ 1 root root 64 Nov 9 12:35 26 -> /home/username/.config/google-chrome/Default/Pepper Data/Shockwave Flash/.com.google.Chrome.QMzxP8 (deleted) But could not be copied. Then what are the places where firefox or google-chrome stores the streaming videos? And is it possible to recover(copy) a video from there to watch them offline? P.S I have other ways(downloaders) to have streaming videos, but my question is very specific.

Read the article
Wubi installation broken by update - now unable to mount

- by Outspaced

As of today, my wubi installation of Ubuntu won't boot (goes straight to 'minimal bash-like interface) and I am unable to mount it when I boot straight to Ubuntu. If I boot straight into Ubuntu (not using Wubi, not going via Windows), I am able to mount the Windows partition and see the Wubi partition there: sudo mount -t ntfs /dev/sda5 /media/winxp And from there I can see the wubi root disk: /media/winxp/ubuntu/disks/root.disk But if I try to mount this: sudo mount -o loop /media/winxp/ubuntu/disks/root.disk /media/wubi I get an error: /media/winxp/ubuntu/disks/root.disk Input/Output Error If I then try fsck: sudo fsck /media/winxp/ubuntu/disks/root.disk I get this: Input/Output Error while trying to open /media/winxp/ubuntu/disks/root.disk The Superblock could not be read or does not describe a correct etx2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt and you might want to try running e2fsk with an alternate superblock: e2fsck -b 8193 <device ... this gives me the same result. There is data on this partition that I really need to be able to access, so I can't delete and reinstall. Any help much appreciated. Thanks.

Read the article
Ubuntu 12.04 takes too long to boot

- by msPeachy

I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

Read the article
WinQual: Why would WER not accept code-signing certificates?

- by Ian Boyd

In 2005 i tried to establish a WinQual account with Microsoft, so i could pick up our (if any) crash dump files submitted automatically through Windows Error Reporting (WER). i was not allowed to have my crash dumps, because i don't have a Verisign certificate. Instead i have a cheaper one, generated by a Verisign subsidiary: Thawte. The method in which you join is: you digitally sign a sample exe they provide. This proves that you are the same signer that signed apps that they got crash dumps from in the wild. Cryptographically, the private key is needed to generate a digital signature on an executable. Only the holder of that private key can create a signature with for the matching public key. It doesn't matter who generated that private key. That includes certificates that are generated from: self-signing Wells Fargo DigiCert SecureTrust Trustware QuoVadis GoDaddy Entrust Cybertrust GeoTrust GlobalSign Comodo Thawte Verisign Yet Microsof's WinQual only accepts digital certificates generated by Verisign. Not even Verisign's subsidiaries are good enough (Thawte). Can anyone think of any technical, legal or ethical reason why Microsoft doesn't want to accept code-signing certificates? The WinQual site says: Why Is a Digital Certificate Required for Winqual Membership? A digital certificate helps protect your company from individuals who seek to impersonate members of your staff or who would otherwise commit acts of fraud against your company. Using a digital certificate enables proof of an identity for a user or an organization. Is somehow a Thawte digital certificate not secure? Two years later, i sent a reminder notice to WinQual that i've been waiting to be able to get at my crash dumps. The response from WinQual team was: Hello, Thanks for the reminder. We have notified the appropriate people that this is still a request. In 2008 i asked this question in a Microsoft support forum, and the response was: We are only setup to accept VeriSign Certificates at this point. We have not had an overwhelming demand to support other types of certificates. What can it possibly mean to not be "setup" to accept other kinds of certificates? If the thumbprint of the key that signed the WinQual.exe test app is the same as the thumbprint that signed the executable who's crash dump you got in the wild: it is proven - they are my crash dumps, give them to me. And it's not like there's a special API to check if a Verisign digital signature is valid, as opposed to all other digital signatures. A valid signature is valid no matter who generated the key. Microsoft is free to not trust the signer, but that's not the same as identity. So that is my question, can anyone think of any practical reason why WinQual isn't setup to support digital signatures? One person theorized that the answer is that they're just lazy: Not that I know but I would assume that the team running the winQual system is a live team and not a dev team - as in, personality and skillset geared towards maintenance of existing systems. I could be wrong though. They don't want to do work to change it. But can anyone think of anything that would need to be changed? It's the same logic no matter what generated the key: "does the thumbprint match". What am i missing?

Read the article
Can I set a <probing> privatePath in ~/subdir/web.config without access to the root application .con

- by Bago

In ASP.NET, is it possible to set a path from a web.config in a subdir that is not setup as a virtual directory? In other words, can I reference a private assembly in the ~/subdir/bin folder? Take a look at my setup below, and let me know if I'm doing something wrong, please. Let me explain why I'm doing this: my page is setup in ~/subdir. I don't have write access to the root. I only have FTP access to the server (i.e., I am not an IIS admin and I can't login to the machine) I am trying to use FCKeditor in my subdir application Here is my folder structure: / | -subdir | | - Bin | | | *FredCK.FCKeditorV2.dll | | *Default.aspx | | *web.config Here is the <runtime> section of ~/subdir/web.config: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <probing privatePath="subdir;subdir/bin" /> </dependentAssembly> </assemblyBinding> </runtime> I've tried all sorts of things to get to work. However, upon checking the Fusion logs, my subdir never shows up in the probing paths.

Read the article
How to get NEW width/height of root layout in onConfigurationChanged?

- by jboxer

One of our views has a ScrollView as its root layout. When the device is rotated and onConfigurationChanged() is called, we'd like to be able to get the ScrollView's new width/height. Our code looks like this: @Override public void onConfigurationChanged(Configuration newConfig) { Log.d(TAG, "Width: '" + findViewById(R.id.scrollview).getWidth() + "'"); Log.d(TAG, "Height: '" + findViewById(R.id.scrollview).getHeight() + "'"); super.onConfigurationChanged(newConfig); Log.d(TAG, "Width: '" + findViewById(R.id.scrollview).getWidth() + "'"); Log.d(TAG, "Height: '" + findViewById(R.id.scrollview).getHeight() + "'"); } And the relevant section of our AndroidManifest.xml looks like this: <activity android:name=".SomeActivity" android:configChanges="keyboardHidden|orientation"> <intent-filter> <action android:name="android.intent.action.MAIN" /> </intent-filter> </activity> On our Droid, we expected to see the ScrollView's width go to 854 when switched into landscape, and to 480 when switched back to portrait (and the height do the equivalent switch, minus the menu bar). However, we're seeing the opposite. Here's our LogCat: // Switching to landscape: 03-26 11:26:16.490: DEBUG/ourtag(17245): Width: '480' // Before super 03-26 11:26:16.490: DEBUG/ourtag(17245): Height: '778' // Before super 03-26 11:26:16.529: DEBUG/ourtag(17245): Width: '480' // After super 03-26 11:26:16.536: DEBUG/ourtag(17245): Height: '778' // After super // Switching to portrait: 03-26 11:26:28.724: DEBUG/ourtag(17245): Width: '854' // Before super 03-26 11:26:28.740: DEBUG/ourtag(17245): Height: '404' // Before super 03-26 11:26:28.740: DEBUG/ourtag(17245): Width: '854' // After super 03-26 11:26:28.740: DEBUG/ourtag(17245): Height: '404' // After super Clearly, we're getting the portrait dimensions when we switch to landscape, and the landscape dimensions when we switch to portrait. Is there something we're doing wrong? We could get hacky and solve this, but I feel like there's a simple solution that we're missing.

Read the article
How do I get Google Chrome's root bookmarks folder?

- by Wayne

Hi, I'm trying to write a better bookmark manager in chrome extensions. The problem is there are no simple examples (that I can find) about how to actually use the bookmarks api (available here: http://code.google.com/chrome/extensions/bookmarks.html ) I've looked at the example source (when I d/led and installed it on my computer it didn't do anything except provide a search box. Typing/typing and pressing return failed to do anything) and can't find anything useful. My ultimate goal is to make an extension that allows me to save pages to come and read later without having to go sign up for an account on some service somewhere. So I plan to create either one or two bookmark folders in the root folder/other bookmarks - at minimum an "unread pages" folder. In that folder I'll create the unread bookmarks. When the user marks the item as read, it will be removed from that folder. So that's what I'm trying to do... any help will be greatly appreciated, even if it's just pointing me to some good examples. UPDATE: ...<script> function display(tree){ document.getElementById("Output").innerHTML = tree; } function start(){ chrome.bookmarks.getTree(display); } </script> </head> <body> <h4 id="Output"></h4> <script> start(); </script> ... That displays [object Object], that suggests (at least to me with a limited JavaScript experience) that an object exists. But how to access the members of that object? changing tree to tree.id or any other of what look to be parameters displays "undefined".

Read the article
How to get root as '/' with Kohana3, base_url and mod rewrite.

- by Drew

Hi all! I've only just started using Kohana ( 3 hours ago), and so far it's blown my socks off (and I'm wearing slippers, so that's quite impressive). Right now, I have a controller 'Controller_FrontPage' with associated views and models and I'm trying to get it accesible from the root of my website (eg, http://www.mysite.com/). If I edit the default controller in the bootstrap from: Route::set('default', '(<controller>(/<action>(/<id>)))') ->defaults(array( 'controller' => 'welcome', 'action' => 'index', )); to 'controller' => '', I get an error, could not find controller_ (which makes sense), and if I change it to 'controller' => '/', I get an error, could not find controller_/ (which also makes sense). If I set 'controller' => 'FrontPage', everything works fine, but all my links (html::anchor(...)) point to http://www.mysite.com/FrontPage/*. Is there a way to have all the anchors point to http://www.mysite.com/*?

Read the article
redirecting the root domain - SEO and other issues, need some guidance!

- by Jim Sp

I'm not familiar with some of these forwarding methods and I need help. My issue is this: I have a site hosted on discountasp.net. My domain was registered through 1&1 and I redirected the DNS to what discountasp.net wanted. So when a user types www.mydomain.com, he/she sees the ASP.NET site hosted on discountasp.net, which is all fine My main page is Index.aspx, I really suck at html page design and I don't have time or the talent to fiddle with it (or money to get it done by a pro). The rest of the pages are fine. I want to use a good theme from tumblr or bloggr - one of the blog sites and create a page that I want to use as the first page - directly on blogger or tumblr - say yyy.blogspot.com (I have many reasons, so for now please don't bash my decision - let's just say that's what I want). That means when a user types www.mydomain.com, it should redirect it to the blogger or tumblr page. Everything else stays the sme - the links on the blogger page will say www.mydomain.com/xxxx and show up what's on the hosted website. I have setup the IIS rewrite rules etc. etc. so that all works just fine The bottom line is I want to show an external site's web page as my root page. I suppose I'm struggling to even explain what I want! I can of course do a response.redirect on the Index.aspx page - which is the simplest way to manage this, but the big question is will this hurt SEO in some way? If not, that would be what I do and leave the rest of the infrastructure intact (I have already done this to test and it works fine) Thank you very much j

Read the article
What can a company possibly gain by making Android phones hard to root?

- by Chinmay Kanchi

As someone who recently got a HTC Hero, I had to jump through several hoops to get root access on the phone to install custom firmware. Now, Android is open-source and fairly easy to build and hack on an emulator. It seems to be against the spirit of open-source to lock down a phone so you can't hack the phone itself. Now, often, there are understandable (though not always justifiable) reasons for locking a device down. For example, it might have proprietary software on it or you might want to retain control of the platform. However, Android by its open-source nature makes such concerns moot. Everyone and their dog has access to the userland code, and HTC is forced by the GPL to release kernel sources for each of their devices. So, I fail to see any motivation for alienating the hackers, when there is no possible benefit (in my mind) to be had from doing this. Any idea why a company would want to do this? Is it just short-sightedness or am I missing possible commercial implications of this?

Read the article
?Exadata??????DBFS

- by Liu Maclean(???)

?Exadata???DBFS ??????? 1. ??fuse RPM [root@dm01db01 ~]# yum install fuse Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse x86_64 2.7.4-8.0.1.el5 el5_latest 85 k Transaction Summary ======================================================================================================================================================================== Install 1 Package(s) Upgrade 0 Package(s) Total download size: 85 k Is this ok [y/N]: y Downloading Packages: fuse-2.7.4-8.0.1.el5.x86_64.rpm | 85 kB 00:00 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse 1/1 Installed: fuse.x86_64 0:2.7.4-8.0.1.el5 [root@dm01db01 ~]# yum install fuse-libs Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse-libs.i386 0:2.7.4-8.0.1.el5 set to be updated ---> Package fuse-libs.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse-libs i386 2.7.4-8.0.1.el5 el5_latest 71 k fuse-libs x86_64 2.7.4-8.0.1.el5 el5_latest 70 k Transaction Summary ======================================================================================================================================================================== Install 2 Package(s) Upgrade 0 Package(s) Total download size: 141 k Is this ok [y/N]: y Downloading Packages: (1/2): fuse-libs-2.7.4-8.0.1.el5.x86_64.rpm | 70 kB 00:00 (2/2): fuse-libs-2.7.4-8.0.1.el5.i386.rpm | 71 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 71 kB/s | 141 kB 00:01 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse-libs 1/2 Installing : fuse-libs 2/2 Installed: fuse-libs.i386 0:2.7.4-8.0.1.el5 fuse-libs.x86_64 0:2.7.4-8.0.1.el5 Complete! [root@dm01db01 ~]# yum install fuse-devel Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse-devel.i386 0:2.7.4-8.0.1.el5 set to be updated ---> Package fuse-devel.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse-devel i386 2.7.4-8.0.1.el5 el5_latest 28 k fuse-devel x86_64 2.7.4-8.0.1.el5 el5_latest 28 k Transaction Summary ======================================================================================================================================================================== Install 2 Package(s) Upgrade 0 Package(s) Total download size: 57 k Is this ok [y/N]: y Downloading Packages: (1/2): fuse-devel-2.7.4-8.0.1.el5.x86_64.rpm | 28 kB 00:00 (2/2): fuse-devel-2.7.4-8.0.1.el5.i386.rpm | 28 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 21 kB/s | 57 kB 00:02 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse-devel 1/2 Installing : fuse-devel 2/2 Installed: fuse-devel.i386 0:2.7.4-8.0.1.el5 fuse-devel.x86_64 0:2.7.4-8.0.1.el5 Complete! 2. ?? DBFS??? ?????? cd $ORACLE_HOME/rdbms/admin sqlplus / as sysdba Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> @prvtfspi.plb Package body created. No errors. Package body created. No errors. ?????dbms_dbfs_sfs package SQL> create tablespace dbfstbs datafile size 20g; Tablespace created. SQL> create user maclean_dbfs identified by oracle; User created. SQL> grant dba to maclean_dbfs; Grant succeeded. @@!!! SQL> grant dbfs_role to maclean_dbfs; Grant succeeded. 3. ??DBFS SQL> conn maclean_dbfs/oracle Connected. SQL> @?/rdbms/admin/dbfs_create_filesystem.sql dbfstbs mac_dbfs No errors. -------- CREATE STORE: begin dbms_dbfs_sfs.createFilesystem(store_name => 'FS_MAC_DBFS', tbl_name => 'T_MAC_DBFS', tbl_tbs => 'dbfstbs', lob_tbs => 'dbfstbs', do_partition => false, partition_key => 1, do_compress => false, compression => '', do_dedup => false, do_encrypt => false); end; -------- REGISTER STORE: begin dbms_dbfs_content.registerStore(store_name=> 'FS_MAC_DBFS', provider_name => 'sample1', provider_package => 'dbms_dbfs_sfs'); end; -------- MOUNT STORE: begin dbms_dbfs_content.mountStore(store_name=>'FS_MAC_DBFS', store_mount=>'mac_dbfs'); end; -------- CHMOD STORE: declare m integer; begin m := dbms_fuse.fs_chmod('/mac_dbfs', 16895); end; No errors. 4. ??mount point [root@dm01db01 ~]# mkdir /dbfs [root@dm01db01 ~]# chown oracle:oinstall /dbfs 5. ??library path ?OS # echo "/usr/local/lib" >> /etc/ld.so.conf.d/usr_local_lib.conf 6. ?????? export ORACLE_HOME=/s01/orabase/product/11.2.0/dbhome_1 [root@dm01db01 ~]# ln -s $ORACLE_HOME/lib/libclntsh.so.11.1 /usr/local/lib/libclntsh.so.11.1 [root@dm01db01 ~]# ln -s $ORACLE_HOME/lib/libnnz11.so /usr/local/lib/libnnz11.so [root@dm01db01 ~]# ln -s /lib64/libfuse.so.2 /usr/local/lib/libfuse.so.2 7. ??ldconfig [root@dm01db01 ~]# ldconfig [root@dm01db01 ~]# 8. ??fusermount??????? [root@dm01db01 ~]# chmod +x /usr/bin/fusermount [root@dm01db01 ~]# ls -l /usr/bin/fusermount lrwxrwxrwx 1 root root 15 Sep 7 03:06 /usr/bin/fusermount -> /bin/fusermount [root@dm01db01 ~]# ls -l /bin/fusermount -rwsr-x--x 1 root fuse 27072 Oct 17 2011 /bin/fusermount 9. ???????OS dbfs_client maclean_dbfs@dm01db01:1521/orcl /dbfs 10. ????nohup + &?????mount DBFS,???????????? [oracle@dm01db01 ~]$ echo "oracle" >> dbfs_pw [oracle@dm01db01 ~]$ nohup dbfs_client maclean_dbfs@dm01db01:1521/orcl /dbfs < dbfs_pw & [oracle@dm01db01 ~]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VGExaDb-LVDbSys1 30G 15G 14G 53% / /dev/sda1 502M 30M 447M 7% /boot /dev/mapper/VGExaDb-LVDbOra1 99G 20G 75G 21% /u01 tmpfs 81G 0 81G 0% /dev/shm dbfs-maclean_dbfs@orcl:/ 20G 120K 20G 1% /dbfs [oracle@dm01db01 ~]$ mount /dev/mapper/VGExaDb-LVDbSys1 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sda1 on /boot type ext3 (rw,nodev) /dev/mapper/VGExaDb-LVDbOra1 on /u01 type ext3 (rw,nodev) tmpfs on /dev/shm type tmpfs (rw,size=82052m) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) dbfs-maclean_dbfs@orcl:/ on /dbfs type fuse (rw,nosuid,nodev,max_read=1048576,default_permissions,user=oracle) [oracle@dm01db01 ~]$ ls -l /dbfs/ total 0 drwxrwxrwx 3 root root 0 Sep 14 05:11 mac_dbfs [oracle@nas ~]$ dbfs_client --------MOUNT mode: usage: dbfs_client <db_user>@<db_server> [options] <mountpoint> db_user: Name of Database user that owns DBFS content repository filesystem(s) db_server: A valid connect string for Oracle database server (for example, hrdb_host:1521/hrservice) mountpoint: Path to mount Database File System(s) All the file systems owned by the database user will be seen at the mountpoint. DBFS options: -o direct_io Bypass the Linux page cache. Gives much better performance for large files. Programs in the file system cannot be executed with this option. This option is recommended when DBFS is used as an ETL staging area. -o wallet Run dbfs_client in background. Wallet must be configured to get credentials. -o failover dbfs_client fails over to surviving database instance with no data loss. Some performance cost on writes, especially for small files. -o allow_root Allows root access to the filesystem. This option requires setting 'user_allow_other' parameter in '/etc/fuse.conf'. -o allow_other Allows other users access to the file system. This option requires setting 'user_allow_other' parameter in '/etc/fuse.conf'. -o rw Mount the filesystem read-write. [Default] -o ro Mount the filesystem read-only. Files cannot be modified. -o trace_file=STR Tracing <filename> | 'syslog' -o trace_level=N Trace Level: 1->DEBUG, 2->INFO, 3->WARNING, 4->ERROR, 5->CRITICAL [Default: 4] -h help -V version --------COMMAND mode: Usage: dbfs_client <db_user>@<db_server> --command command [switches] [arguments] command: Command to be executed, e.g., ls, cp, mkdir, rm switches: Switches are described below for each command. arguments: File names or directory names NOTE: All database pathnames must be absolute and preceded by dbfs:/ Commands ls dbfs_client <db_user>@<db_server> --command ls [switches] target Switches: -a Show all files including those starting with '.' -l Use a long listing format. In addition to the name of each file print the file type, permissions, size, user and group information -R List subdirectories recursively cp dbfs_client <db_user>@<db_server> --command cp [switches] source destination Switches: -r, -R Copy a directory and its contents recursively into the destination directory rm dbfs_client <db_user>@<db_server> --command rm [switches] target Switches: -r, -R Removes a directory and its contents recursively mkdir dbfs_client <db_user>@<db_server> --command mkdir directory_name Examples dbfs_client ETLUser@DBConnectString --command ls -l -a dbfs:/staging_area/directory1 dbfs_client ETLUser@DBConnectString --command cp -R /tmp/1-Jan-2009-dump dbfs:/staging_area dbfs_client ETLUser@DBConnectString --command rm dbfs:/staging_area/hello.txt dbfs_client ETLUser@DBConnectString --command mkdir dbfs:/staging_area/directory2 [oracle@dm01db01 ~]$ ls -lh /tmp/largefile -rw-r--r-- 1 oracle oinstall 2.0G Sep 14 08:50 /tmp/largefile [oracle@dm01db01 ~]$ time dbfs_client maclean_dbfs@dm01db01:1521/orcl --command cp /tmp/largefile dbfs:/mac_dbfs Password: /tmp/largefile -> dbfs:/mac_dbfs/largefile real 0m11.802s user 0m0.580s sys 0m2.375s ?Exadata?????2G?????? DBFS???11s => 200MB/s

Read the article
Static background noise while using new headset Ubuntu 13.04

- by ThundLayr

Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

Read the article
How do I get an Enter USB TV Box TV tuner aka Gadmei UTV302 to work?

- by Subhash

Has anyone had any success in using the Enter USB TV Box from Enter Multimedia? It comes bundled with software that works in Windows. I have had no luck using it in Ubuntu 10.10. Update 1 Here is the output from lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1f71:3301 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I can't find the Enter USB TV Box listed in this. In the dmesg tail command, I found something that seems to be related to the card: usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256 Update 2 From Windows I learned that this USB TV tuner uses some chipset from Gadmei corporation. All computer stores in India sell Enter USB TV Box if you ask for an USB TV tuner. No other brand seems to be interested in this market. Update 3 I learned that this TV tuner is rebranded version of Gadmei UTV302 (USB TV Tuner Box). Update 4 I tried adding em28xx as the chipset (as suggested by user BOBBO below) for the tuner but that did not work. I went back to my Pinnacle PCTV internal card. I don't think the tuner referred by UbuntuForums (Gadmei UTV 330) and the tuner that I have (Gadmei UTV 302) are the same. My USB tuner is several times bigger. My tuner seems to be a newer device with a newer tuner chip. I will submit details of this device to the LinuxTV developers this weekend. Update 5 I opened the tuner box and found that it uses a tuner from a Chinese company - Tenas. Model is TNF 8022-DFA. Update 6 Tuner chip specs (retrived from supplier directory) for Tenas TNF 8022-DFA. Supply voltage: true 5V device(low power dissipation) Control system: I2C bus control of tuning, address selection Tuning system: PLL controlled tuning Receiving system: system PAL D/K,IF(Intermediate Frequency): 38MHz Receiving channels: full frequency range from channel DS1 (49.75MHz) to channel DS57 (863.25MHz); Use Texas Instruments SN761678 IC solution, with mini install size Update 7 Reverse side of the circuit board. Picture of the TV tuner

Read the article
I can't install using Wubi due to permission denied error

- by Taksh Sharma

I can't install ubuntu 11.10 inside my windows 7. It shows permission denied while installation. It gave a log file having the following data: 03-29 20:19 DEBUG TaskList: # Running tasklist... 03-29 20:19 DEBUG TaskList: ## Running select_target_dir... 03-29 20:19 INFO WindowsBackend: Installing into D:\ubuntu 03-29 20:19 DEBUG TaskList: ## Finished select_target_dir 03-29 20:19 DEBUG TaskList: ## Running create_dir_structure... 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu\disks 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu\install 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu\install\boot 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu\disks\boot 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu\disks\boot\grub 03-29 20:19 DEBUG CommonBackend: Creating dir D:\ubuntu\install\boot\grub 03-29 20:19 DEBUG TaskList: ## Finished create_dir_structure 03-29 20:19 DEBUG TaskList: ## Running uncompress_target_dir... 03-29 20:19 DEBUG TaskList: ## Finished uncompress_target_dir 03-29 20:19 DEBUG TaskList: ## Running create_uninstaller... 03-29 20:19 DEBUG WindowsBackend: Copying uninstaller E:\wubi.exe -> D:\ubuntu\uninstall-wubi.exe 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi UninstallString D:\ubuntu\uninstall-wubi.exe 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi InstallationDir D:\ubuntu 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayName Ubuntu 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayIcon D:\ubuntu\Ubuntu.ico 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayVersion 11.10-rev241 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi Publisher Ubuntu 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi URLInfoAbout http://www.ubuntu.com 03-29 20:19 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi HelpLink http://www.ubuntu.com/support 03-29 20:19 DEBUG TaskList: ## Finished create_uninstaller 03-29 20:19 DEBUG TaskList: ## Running copy_installation_files... 03-29 20:19 DEBUG WindowsBackend: Copying C:\Users\Home\AppData\Local\Temp\pylB911.tmp\data\custom-installation -> D:\ubuntu\install\custom-installation 03-29 20:19 DEBUG WindowsBackend: Copying C:\Users\Home\AppData\Local\Temp\pylB911.tmp\winboot -> D:\ubuntu\winboot 03-29 20:19 DEBUG WindowsBackend: Copying C:\Users\Home\AppData\Local\Temp\pylB911.tmp\data\images\Ubuntu.ico -> D:\ubuntu\Ubuntu.ico 03-29 20:19 DEBUG TaskList: ## Finished copy_installation_files 03-29 20:19 DEBUG TaskList: ## Running get_iso... 03-29 20:19 DEBUG TaskList: New task copy_file 03-29 20:19 DEBUG TaskList: ### Running copy_file... 03-29 20:23 ERROR TaskList: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-29 20:23 DEBUG TaskList: # Cancelling tasklist 03-29 20:23 DEBUG TaskList: New task check_iso 03-29 20:23 ERROR root: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 130, in select_task File "\lib\wubi\application.py", line 205, in run_cd_menu File "\lib\wubi\application.py", line 120, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-29 20:23 ERROR TaskList: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path' 03-29 20:23 DEBUG TaskList: # Cancelling tasklist 03-29 20:23 DEBUG TaskList: # Finished tasklist 03-29 20:29 INFO root: === wubi 11.10 rev241 === 03-29 20:29 DEBUG root: Logfile is c:\users\home\appdata\local\temp\wubi-11.10-rev241.log 03-29 20:29 DEBUG root: sys.argv = ['main.pyo', '--exefile="E:\\wubi.exe"'] 03-29 20:29 DEBUG CommonBackend: data_dir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\data 03-29 20:29 DEBUG WindowsBackend: 7z=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\bin\7z.exe 03-29 20:29 DEBUG WindowsBackend: startup_folder=C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup 03-29 20:29 DEBUG CommonBackend: Fetching basic info... 03-29 20:29 DEBUG CommonBackend: original_exe=E:\wubi.exe 03-29 20:29 DEBUG CommonBackend: platform=win32 03-29 20:29 DEBUG CommonBackend: osname=nt 03-29 20:29 DEBUG CommonBackend: language=en_IN 03-29 20:29 DEBUG CommonBackend: encoding=cp1252 03-29 20:29 DEBUG WindowsBackend: arch=amd64 03-29 20:29 DEBUG CommonBackend: Parsing isolist=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\data\isolist.ini 03-29 20:29 DEBUG CommonBackend: Adding distro Xubuntu-i386 03-29 20:29 DEBUG CommonBackend: Adding distro Xubuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Kubuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Mythbuntu-i386 03-29 20:29 DEBUG CommonBackend: Adding distro Ubuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Ubuntu-i386 03-29 20:29 DEBUG CommonBackend: Adding distro Mythbuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Kubuntu-i386 03-29 20:29 DEBUG WindowsBackend: Fetching host info... 03-29 20:29 DEBUG WindowsBackend: registry_key=Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi 03-29 20:29 DEBUG WindowsBackend: windows version=vista 03-29 20:29 DEBUG WindowsBackend: windows_version2=Windows 7 Home Basic 03-29 20:29 DEBUG WindowsBackend: windows_sp=None 03-29 20:29 DEBUG WindowsBackend: windows_build=7601 03-29 20:29 DEBUG WindowsBackend: gmt=5 03-29 20:29 DEBUG WindowsBackend: country=IN 03-29 20:29 DEBUG WindowsBackend: timezone=Asia/Calcutta 03-29 20:29 DEBUG WindowsBackend: windows_username=Home 03-29 20:29 DEBUG WindowsBackend: user_full_name=Home 03-29 20:29 DEBUG WindowsBackend: user_directory=C:\Users\Home 03-29 20:29 DEBUG WindowsBackend: windows_language_code=1033 03-29 20:29 DEBUG WindowsBackend: windows_language=English 03-29 20:29 DEBUG WindowsBackend: processor_name=Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz 03-29 20:29 DEBUG WindowsBackend: bootloader=vista 03-29 20:29 DEBUG WindowsBackend: system_drive=Drive(C: hd 61135.1523438 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(C: hd 61135.1523438 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(D: hd 12742.5507813 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(E: cd 0.0 mb free cdfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(F: cd 0.0 mb free ) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(G: hd 93.22265625 mb free fat32) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(Q: hd 0.0 mb free ) 03-29 20:29 DEBUG WindowsBackend: uninstaller_path=D:\ubuntu\uninstall-wubi.exe 03-29 20:29 DEBUG WindowsBackend: previous_target_dir=D:\ubuntu 03-29 20:29 DEBUG WindowsBackend: previous_distro_name=Ubuntu 03-29 20:29 DEBUG WindowsBackend: keyboard_id=67699721 03-29 20:29 DEBUG WindowsBackend: keyboard_layout=us 03-29 20:29 DEBUG WindowsBackend: keyboard_variant= 03-29 20:29 DEBUG CommonBackend: python locale=('en_IN', 'cp1252') 03-29 20:29 DEBUG CommonBackend: locale=en_IN 03-29 20:29 DEBUG WindowsBackend: total_memory_mb=3893.859375 03-29 20:29 DEBUG CommonBackend: Searching ISOs on USB devices 03-29 20:29 DEBUG CommonBackend: Searching for local CDs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: parsing info from str=Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) 03-29 20:29 DEBUG Distro: parsed info={'name': 'Ubuntu', 'subversion': 'Release', 'version': '11.10', 'build': '20111012', 'codename': 'Oneiric Ocelot', 'arch': 'i386'} 03-29 20:29 INFO Distro: Found a valid CD for Ubuntu: E:\ 03-29 20:29 INFO root: Running the CD menu... 03-29 20:29 DEBUG WindowsFrontend: __init__... 03-29 20:29 DEBUG WindowsFrontend: on_init... 03-29 20:29 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_IN', 'en'] 03-29 20:29 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_IN', 'en'] 03-29 20:29 INFO root: CD menu finished 03-29 20:29 INFO root: Already installed, running the uninstaller... 03-29 20:29 INFO root: Running the uninstaller... 03-29 20:29 INFO CommonBackend: This is the uninstaller running 03-29 20:29 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_IN', 'en'] 03-29 20:29 INFO root: Received settings 03-29 20:29 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_IN', 'en'] 03-29 20:29 DEBUG TaskList: # Running tasklist... 03-29 20:29 DEBUG TaskList: ## Running Remove bootloader entry... 03-29 20:29 DEBUG WindowsBackend: Could not find bcd id 03-29 20:29 DEBUG WindowsBackend: undo_bootini C: 03-29 20:29 DEBUG WindowsBackend: undo_configsys Drive(C: hd 61135.1523438 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: undo_bootini D: 03-29 20:29 DEBUG WindowsBackend: undo_configsys Drive(D: hd 12742.5507813 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: undo_bootini G: 03-29 20:29 DEBUG WindowsBackend: undo_configsys Drive(G: hd 93.22265625 mb free fat32) 03-29 20:29 DEBUG WindowsBackend: undo_bootini Q: 03-29 20:29 DEBUG WindowsBackend: undo_configsys Drive(Q: hd 0.0 mb free ) 03-29 20:29 DEBUG TaskList: ## Finished Remove bootloader entry 03-29 20:29 DEBUG TaskList: ## Running Remove target dir... 03-29 20:29 DEBUG CommonBackend: Deleting D:\ubuntu 03-29 20:29 DEBUG TaskList: ## Finished Remove target dir 03-29 20:29 DEBUG TaskList: ## Running Remove registry key... 03-29 20:29 DEBUG TaskList: ## Finished Remove registry key 03-29 20:29 DEBUG TaskList: # Finished tasklist 03-29 20:29 INFO root: Almost finished uninstalling 03-29 20:29 INFO root: Finished uninstallation 03-29 20:29 DEBUG CommonBackend: Fetching basic info... 03-29 20:29 DEBUG CommonBackend: original_exe=E:\wubi.exe 03-29 20:29 DEBUG CommonBackend: platform=win32 03-29 20:29 DEBUG CommonBackend: osname=nt 03-29 20:29 DEBUG WindowsBackend: arch=amd64 03-29 20:29 DEBUG CommonBackend: Parsing isolist=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\data\isolist.ini 03-29 20:29 DEBUG CommonBackend: Adding distro Xubuntu-i386 03-29 20:29 DEBUG CommonBackend: Adding distro Xubuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Kubuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Mythbuntu-i386 03-29 20:29 DEBUG CommonBackend: Adding distro Ubuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Ubuntu-i386 03-29 20:29 DEBUG CommonBackend: Adding distro Mythbuntu-amd64 03-29 20:29 DEBUG CommonBackend: Adding distro Kubuntu-i386 03-29 20:29 DEBUG WindowsBackend: Fetching host info... 03-29 20:29 DEBUG WindowsBackend: registry_key=Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi 03-29 20:29 DEBUG WindowsBackend: windows version=vista 03-29 20:29 DEBUG WindowsBackend: windows_version2=Windows 7 Home Basic 03-29 20:29 DEBUG WindowsBackend: windows_sp=None 03-29 20:29 DEBUG WindowsBackend: windows_build=7601 03-29 20:29 DEBUG WindowsBackend: gmt=5 03-29 20:29 DEBUG WindowsBackend: country=IN 03-29 20:29 DEBUG WindowsBackend: timezone=Asia/Calcutta 03-29 20:29 DEBUG WindowsBackend: windows_username=Home 03-29 20:29 DEBUG WindowsBackend: user_full_name=Home 03-29 20:29 DEBUG WindowsBackend: user_directory=C:\Users\Home 03-29 20:29 DEBUG WindowsBackend: windows_language_code=1033 03-29 20:29 DEBUG WindowsBackend: windows_language=English 03-29 20:29 DEBUG WindowsBackend: processor_name=Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz 03-29 20:29 DEBUG WindowsBackend: bootloader=vista 03-29 20:29 DEBUG WindowsBackend: system_drive=Drive(C: hd 61134.8632813 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(C: hd 61134.8632813 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(D: hd 12953.140625 mb free ntfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(E: cd 0.0 mb free cdfs) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(F: cd 0.0 mb free ) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(G: hd 93.22265625 mb free fat32) 03-29 20:29 DEBUG WindowsBackend: drive=Drive(Q: hd 0.0 mb free ) 03-29 20:29 DEBUG WindowsBackend: uninstaller_path=None 03-29 20:29 DEBUG WindowsBackend: previous_target_dir=None 03-29 20:29 DEBUG WindowsBackend: previous_distro_name=None 03-29 20:29 DEBUG WindowsBackend: keyboard_id=67699721 03-29 20:29 DEBUG WindowsBackend: keyboard_layout=us 03-29 20:29 DEBUG WindowsBackend: keyboard_variant= 03-29 20:29 DEBUG WindowsBackend: total_memory_mb=3893.859375 03-29 20:29 DEBUG CommonBackend: Searching ISOs on USB devices 03-29 20:29 DEBUG CommonBackend: Searching for local CDs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether C:\Users\Home\AppData\Local\Temp\pyl3487.tmp is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-29 20:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-29 20:29 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 03-29 20:29 INFO Distro: Found a valid CD for Ubuntu: E:\ 03-29 20:29 INFO root: Running the installer... 03-29 20:29 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_IN', 'en'] 03-29 20:29 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_IN', 'en'] 03-29 20:30 DEBUG WinuiInstallationPage: target_drive=C:, installation_size=8000MB, distro_name=Ubuntu, language=en_US, locale=en_US.UTF-8, username=taksh 03-29 20:30 INFO root: Received settings 03-29 20:30 INFO WinuiPage: appname=wubi, localedir=C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\translations, languages=['en_US', 'en'] 03-29 20:30 DEBUG TaskList: # Running tasklist... 03-29 20:30 DEBUG TaskList: ## Running select_target_dir... 03-29 20:30 INFO WindowsBackend: Installing into C:\ubuntu 03-29 20:30 DEBUG TaskList: ## Finished select_target_dir 03-29 20:30 DEBUG TaskList: ## Running create_dir_structure... 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu\disks 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu\install 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot\grub 03-29 20:30 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot\grub 03-29 20:30 DEBUG TaskList: ## Finished create_dir_structure 03-29 20:30 DEBUG TaskList: ## Running uncompress_target_dir... 03-29 20:30 DEBUG TaskList: ## Finished uncompress_target_dir 03-29 20:30 DEBUG TaskList: ## Running create_uninstaller... 03-29 20:30 DEBUG WindowsBackend: Copying uninstaller E:\wubi.exe -> C:\ubuntu\uninstall-wubi.exe 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi UninstallString C:\ubuntu\uninstall-wubi.exe 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi InstallationDir C:\ubuntu 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayName Ubuntu 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayIcon C:\ubuntu\Ubuntu.ico 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayVersion 11.10-rev241 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi Publisher Ubuntu 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi URLInfoAbout http://www.ubuntu.com 03-29 20:30 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi HelpLink http://www.ubuntu.com/support 03-29 20:30 DEBUG TaskList: ## Finished create_uninstaller 03-29 20:30 DEBUG TaskList: ## Running copy_installation_files... 03-29 20:30 DEBUG WindowsBackend: Copying C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\data\custom-installation -> C:\ubuntu\install\custom-installation 03-29 20:30 DEBUG WindowsBackend: Copying C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\winboot -> C:\ubuntu\winboot 03-29 20:30 DEBUG WindowsBackend: Copying C:\Users\Home\AppData\Local\Temp\pyl3487.tmp\data\images\Ubuntu.ico -> C:\ubuntu\Ubuntu.ico 03-29 20:30 DEBUG TaskList: ## Finished copy_installation_files 03-29 20:30 DEBUG TaskList: ## Running get_iso... 03-29 20:30 DEBUG TaskList: New task copy_file 03-29 20:30 DEBUG TaskList: ### Running copy_file... 03-29 20:34 ERROR TaskList: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-29 20:34 DEBUG TaskList: # Cancelling tasklist 03-29 20:34 DEBUG TaskList: New task check_iso 03-29 20:34 ERROR root: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 130, in select_task File "\lib\wubi\application.py", line 205, in run_cd_menu File "\lib\wubi\application.py", line 120, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-29 20:34 ERROR TaskList: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path' 03-29 20:34 DEBUG TaskList: # Cancelling tasklist 03-29 20:34 DEBUG TaskList: # Finished tasklist I have no idea what's the problem is. I'm a kind of newbie. I'm using win7 64bit, and installing as an administrator. Please help me out!

Read the article
Delete Nodes + attributes that match Xpath except specific attributes

- by Ryan Ternier

I'm trying to find the best (efficient) way of doing this. I have a medium sized XML document. Depending on specific settings certain portions of it need to be filtered out for security reasons. I'll be doing this in XSLT as it's configurable and no code should need changing. I've looked around, but not getting much luck on it. For example: I have the following XPath: //*[@root='2.16.840.1.113883.3.51.1.1.6.1'] Whicrooth gives me all nodes with a root attribute equal to a specific OID. In these nodes I want to have all attributes except for a few (ex. foo and bar) erased, and then having another attribute added (ex. reason) I also need to have multiple XPath expressions that can be ran to zero down on a specific node and clear it's contents out in a similar fashion, with respect to nodes with specific attributes. I'm playing around with information from: XPath expression to select all XML child nodes except a specific list? and XSLT Remove Elements and/or Attributes by Name per XSL Parameters Will update shortly when I can have access what what I"ve done so far. Example: XML Before Transformation <root> <childNode> <innerChild root="2.16.840.1.113883.3.51.1.1.6.1" a="b" b="c" type="innerChildness"/> <innerChildSibling/> </childNode> <animals> <cat> <name>bob</name> </cat> </animals> <tree/> <water root="2.16.840.1.113883.3.51.1.1.6.1" z="zed" l="ell" type="liquidLIke"/> </root> After <root> <childNode> <innerChild root="2.16.840.1.113883.3.51.1.1.6.1" flavor="MSK"/>  <innerChildSibling/> </childNode> <animals> <cat flavor="MSK" />  </animals> <tree/> <water root="2.16.840.1.113883.3.51.1.1.6.1" flavor="MSK"/>  </root>

Read the article
.com domain transfer failing

- by digital

Hi, I'm trying to transfer one of my .com addresses between registrars. I'm down as the owner contact (confirmed working) and the losing registrar is down as the tech and admin contact. Last week I received an email stating that the domain transfer had been rejected by the losing registrar. I contacted the losing registrar and they denied that. My money from the winning registrar was refunded and I was told to try again. I've initiated the transfer again and received confirmation of pending transfer, I gave the correct EPP code and confirmed the transfer. Currently the status on the domain is set as OK, should it not be transfer pending? According to my name.com transfer page if the transfer is not authd in 5 days it will auto transfer anyway. I don't believe this will happen. Name.com have been really helpful but they can't really do much more now. The losing registrar is not being helpful hence me turning here. What can I do to make sure the domain transfers? The domain transfer is set to expire on the 17th. Any help would be greatly appreciated.

Read the article
How do I serialize an object to xml but not have it be the root element of the xml document

- by mezoid

I have the following object: public class MyClass { public int Id { get; set;} public string Name { get; set; } } I'm wanting to serialize this to the following xml string: <MyClass> <Id>1</Id> <Name>My Name</Name> </MyClass> Unfortunately, when I use the XMLSerializer I get a string which looks like: <?xml version="1.0" encoding="utf-8"?> <MyClass xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Id>1</Id> <Name>My Name</Name> </MyClass> I'm not wanting MyClass to be the root element the document, rather I'm eventually wanting to add the string with other similar serialized objects which will be within a larger xml document. i.e. Eventually I'll have a xml string which looks like this: <Classes> <MyClass> <Id>1</Id> <Name>My Name</Name> </MyClass> <MyClass> <Id>1</Id> <Name>My Name</Name> </MyClass> </Classes>" My first thought was to create a class as follows: public class Classes { public List<MyClass> MyClasses { get; set; } } ...but that just addes an additional node called MyClasses to wrap the list of MyClass.... My gut feeling is that I'm approaching this the wrong way and that my lack of experience with creating xml files isn't helping to point me to some part of the .NET framework or some other library that simplifies this.

Read the article
Google webmaster tools: parameters that only apply on one page

- by Imagine digital

I'm trying to get my e-commerce website on google and still figuring out how it all works. Now, I have seen this feature named URL-parameters, allowing me to set different parameters that affect page content to be indexed (one can also set parameters that do not affect the page, but for me that does not apply..). The question I have about this is whether and how I should add parameters that I only have on some pages of my site. example: The homepage of my site is www.mysite.nl. no parameters at all. But when a user clicks the navigation bar, it links to www.mysite.nl/itemList.php?category=&....subCategory=.... The parameters category and subCategory define whether there is content on my itemList page and what content that is. It gets matching products out of my database based on those 2 variables. The question: How do I make sure that I apply the google URL Parameters function decently for my website?

Read the article
How do I ADD an Attribute to the Root Element in XML using XSLT?

- by kunjaan

I want to match a root Element “FOO” and perform the transformation (add a version attribute) to it leaving the rest as it is. The Transformation I have so far looks like this: <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns="http://schemas.foo.com/fooNameSpace"> <xsl:template match="//FOO"> <xsl:choose> <xsl:when test="@version"> <xsl:apply-templates select="node()|@*" /> </xsl:when> <xsl:otherwise> <FOO> <xsl:attribute name="version">1</xsl:attribute> <xsl:apply-templates select="node()|@*" /> </FOO> </xsl:otherwise> </xsl:choose> </xsl:template> However this does not perform any transformation. It doesn't even detect the element. So I need to do add the namespace in order to make it work: <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fd="http://schemas.foo.com/fooNameSpace"> <xsl:template match="//fd:FOO"> … But this attaches a namespace attribute to the FOO element as well as other elements: <FOO xmlns:fd="http://schemas.foo.com/fooNameSpace" version="1" id="fooid"> <BAR xmlns="http://schemas.foo.com/fooNameSpace" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> Is there a way to say that the element is using the default namespace? Can we match and add elements in the default name space? Here is the original XML: <?xml version="1.0" encoding="UTF-8"?> <FOO xmlns="http://schemas.foo.com/fooNameSpace" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <BAR> <Attribute name="HEIGHT">2067</Attribute> </BAR> </FOO>

Read the article
How can I position some divs inside an unordered list so they line up with the root element of the l

- by Ronedog

I want to position all the divs to line up to the left on the same x coordinate so it looks nice. Notice the picture below, how based on the number of nested categories the div (and its contents) show up at slightly different x coordinates. I need to have the div's line up at exactly the same x coordinate no matter how deeply nested. Note, the bottom most category always has a div for the content, but that div has to be situated inside the last < li . I am using an unordered list to display the menu and thought the best solution would be to grab the root category (Cat 2, and mCat1) and obtain their left offset using jquery, then simply use that value to update the positioning of the div...but I couldn't seem to get it to work just right. I would appreciate any advice or help that you are willing to give. Heres the HTML <ul id="nav> <li>Cat 2 <ul> <li>sub cat2</li> </ul> </li> <li>mCat1 <ul> <li>Subcat A <ul> <li>Subcat A.1 <ul> <li>Annie</li> </ul> </li> </ul> </li> </ul> </li> </ul> Heres some jquery I tried (I have do insert the div inside this .each() loop in order to retrieve some values, but basically, this selector is grabbing the last < li in the menu tree and placing a div after it and that is the div that I want to position. the 245 value was something I was playing around with to see how I could get things to line up, and I know its out of wack, but the problem is still the same no matter what I do: $("#nav li:not(:has(li))").each(function () { var self = $(this); var position = self.offset(); var xLeft = Math.round(position.left)- 245; console.log("xLeft:", xLeft ); self.after( '<div id="' + self.attr('p_node') + '_p_cont_div" class="property_position" style="display:none; left:' + xLeft + 'px;" /> ' ); }); Heres the css: .property_position{ float:left; position: relative; top: 0px; padding-top:5px; padding-bottom:10px; }

Read the article
Delphi: How to set the default project in a project group?

- by Ian Boyd

i have two projects in a project group: ProjectA ProjectB Whenever i open the ProjectGroup.bpg in Delphi, it always starts with the 2nd project as the active one: ProjectA ProjectB And every time i have to flip it to the the "real" project: ProjectA ProjectB How can i make ProjectA the default project that opens with the project group? ProjectGroup.bpg #------------------------------------------------------------------------------ VERSION = BWS.01 #------------------------------------------------------------------------------ !ifndef ROOT ROOT = $(MAKEDIR)\.. !endif #------------------------------------------------------------------------------ MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$** DCC = $(ROOT)\bin\dcc32.exe $** BRCC = $(ROOT)\bin\brcc32.exe $** #------------------------------------------------------------------------------ PROJECTS = ProjectA.exe ProjectB.exe #------------------------------------------------------------------------------ default: $(PROJECTS) #------------------------------------------------------------------------------ ProjectA.exe: ProjectA.dpr $(DCC) ProjectB.exe: childfolder\ProjectB.dpr $(DCC)

Read the article
One-liner to Convert Nested Hashes into dot-separated Strings in Ruby?

- by viatropos

What's the simplest method to convert YAML to dot-separated strings in Ruby? So this: root: child_a: Hello child_b: nested_child_a: Nesting nested_child_b: Nesting Again child_c: K To this: { "ROOT.CHILD_A" => "Hello", "ROOT.CHILD_B.NESTED_CHILD_A" => "Nesting", "ROOT.CHILD_B.NESTED_CHILD_B" => "Nesting Again", "ROOT.CHILD_C" => "K" }

Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82 | Next Page >