Search Results

Search found 17018 results on 681 pages for 'floppy disk drive'.

Page 75/681 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

• Freeing disk space on Ubuntu to use in Windows

  - by Alex

  I have 250Gb drive on a laptop, which has Windows 7 on a 122Gb ntfs partition (which has a "boot" flag on it) and Ubuntu 12.04.1 on a 110Gb extended partition, of which the root ext4 partition is 108Gb and the swap is 1.74Gb. You can see everything in the screenshot below. My question is: I want to diminish the size of the linux root partition and then use that space to increase the windows partition. How do I do that? Also, is it possible to increase the size of the swap partition and not do any damage? If so, how? I'm using GParted, and i'd say i'm pretty confident with it. Screenshot of my partitions

  Read the article

• Cannot boot from USB disk with "not a COM32R image" error

  - by Siva Prasad Varma

  After installing 11.10 on my Dell Studo 15 (Model 1557) laptop, it started to overheat. Recently it even shutdown twice saying that critical temperature has reached even when I was just idling (not even a single program was open except for Firefox). After learning that it is a problem with 3.0.0 kernel I decided to roll back to 10.04 LTS. I have downloaded the most recent 10.04 iso from ubuntu.com and created a live USB using startup disk creator in 11.10. But when I am trying to boot from USB I am getting the following error vesamenu.c32: not a COM32R image I have installed ubuntu from usb stick a couple of dozen times before this and I think it is not a problem with my hardware. Please tell me what to do.

  Read the article

• How to fix the boot loader with an installation disk at hand

  - by Bragboy

  Hi, I recently messed up my Master Boot Record and my system is not booting. I was dual booting Windows and Ubuntu. Both of them are not loading now. I don't care if I lose my windows, but I want my Ubuntu back!! How to get it (I have a fresh Ubuntu 10.10 LTS disk with me). I went through the install wizard but feared that I may loose my existing installation/setup. Thats why I came here to check what is the ideal procedure to only update the Boot record instead of a full installation.

  Read the article

• It takes a long time until Windows XP recognize I connected USB drive

  - by Pavol G

  I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

  Read the article

• Windows 7 64-bit installation from alternative media (no DVD/USB Flash drive)

  - by Niels Willems

  Greetings I currently have Windows 7 x86 installed on my computer. I want to install Windows 7 x64 on a different partition on my computer. However there is a little issue, I cannot run the x64 install from Windows 7 x86 which I currently have. I was planning to Install Windows 7 x64 on another partition to then boot up from that partition to install it on the partition I actually want my OS on. Once that is complete I could just format the partition from the Windows 7 x64 that I didn't need anymore. But the installer will not run from the x86 version of Windows 7 even though I do not want to upgrade that Windows directly. The reason I'm doing this in such a weird way is that my optical drive is broken and I'm really not into buying a new one since I would use it like once every year or so. I also don't have a USB Flash Drive which is big enough to hold the installation files. As far as I'm aware I cannot use an external hard drive such as this one, which I do have. Are there any alternatives in which I can install Windows 7 x64 or am I forced into buying a USB Flash Drive or new optical drive? Thank you in advance for your replies. Edit: This picture shows my current partitions on my laptop. I want to get Windows 7 x64 on the C partition but have to install it first on the F partition to then boot up the F partition windows to format C and install x64 on that one. My external drive is J. Edit 2: No alternative computer which has a DVD drive, install files are located on an iso from MA3D. To install my 32 bit version I mounted the ISO in Daemon Tools to replace my Windows Vista but since I cannot run 64 bit into my 32 bit OS this doesn't work.

  Read the article

• Can't mount cds after failed Brasero burn

  - by Allan

  Brasero failed to burn a disk recently, and now I can't access CD-ROMS. Even CD-Rs are not not showing. Using Ubuntu 11.10 on a Dell D510 Lattitude laptop. allan@allan-Latitude-D510:~$ cdrecord -checkdrive Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/cdrw Using /dev/cdrom of unknown capabilities Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identification : 'DVD+-RW TS-L532B' Revision : 'DE04' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R My CD drive is now useless, and any help on getting it to read/burn would be appreciated.

  Read the article

• Best practices for periodically saving game state to disk

  - by Ben Morris

  I'm working on an MMO. All of the player and environment data lives on a server and is kept in memory. There's a "world" object which keeps track of all of the maps, characters, etc. and their relations to each other. To avoid data loss in case of a crash, I've been periodically serializing the world to disk. The trouble is, this object can be quite large, so when the server starts writing, there's noticeable in-game slowdown for a few seconds, which I'd like to avoid. Any pointers on how to go about this in a more efficient way?

  Read the article

• Drivers and firmware for the LiteOn ihap-122-9 DVD drive

  - by Sandy

  I'm trying to replace the DVD drive in my old PC. LiteOn.com is a mess and I can't find a single working driver or firmware update there, or anywhere. Windows XP tries to use a default, generic driver dated 2001. (About 9 years before this drive even existed.) http://www.firmwarehq.com/download_1..._6L0H.EXE.html This correctly finds my LiteOn ihap-122-9 DVD Drive. It correctly finds that I'm currently using firmware 6L0F. It correctly tries to install 6L0H. It completes 100% but then just fails and says "contact your vendor". Does anyone know why? Where can I actually get drivers... and firmware updates... that actually work for the ihap-122-9? Apparently, the newest driver IS the 1 made 9 years before the drive existed. (Unbelievable.) And the latest firmware is the 1 that is already in the drive. (Common.) No other drive I've had in this computer ever had a problem. This brand new LiteOn is doing this: Opening MY COMPUTER now takes 60 seconds. MY COMPUTER marking the drive as "DVD F:" takes another 30 seconds. MY COMPUTER showing "Batman II" title takes another 15 seconds. Clicking and running the movie will take another 30 seconds for the main-menu to appear. The movie starts about 20 seconds later. The movie runs fine for 1-2 seconds... then stops for 5 seconds.... then starts again and plays for 1-2 seconds. Repeats for 2 hours. (It happens with all store-bought DVDs and all home-made DVDs.)

  Read the article

• Preseed Partman: multiple partitions on one disk /tmp /data /usr swap

  - by Moritz

  trying to get preseeding on 12.04 64bit with what should be a basic setup to work: /dev/sda - the only drive beeing used / - rootfs - 100GB /boot - 1GB /tmp - 10GB /data - should take all available space swap - 10GB - d-i partman-auto/expert_recipe string \ boot-root :: \ 1000 50 1000 ext4 \ $primary{ } $bootable{ } \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ /boot } \ . \ 500 1000 10000 ext4 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ /tmp } \ . \ 500 5000 100000000 ext4 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ /data } \ . \ 64 2000 10000 linux-swap \ method{ swap } format{ } \ . \ 500 3000 100000 ext4 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ / } \ . If i only use the code for /boot,swap and / it works. Also i was wondering weather i have to specify some other recipe name than "boot-root", but trying "thisNameIsNotDefinedInPartman" the result was the same. The Error message displayed by the ubuntu installer is always "no root file system is defined" Thanks for your help, Moritz

  Read the article

• GRUB 2 Error : No such disk

  - by Chandra Sekhar

  I have gone through many pains to boot through my windows 7 partition. I had windows 7, then one fine day I installed Ubuntu and again formatted the partition where Ubuntu was installed only to find the my Windows does not boot(Probably corrupted MBR). I again installed Ubuntu later but the Grub could not detect windows. So I manually added windows by editing the file 40_custom. But when I select the win7 entry in the grub, it displays the error : no such disk. What do I do?? Additional Info : Ubuntu version : 11.10 x64|| Win 7 Home premium, 64 bit|| While in the process of debugging I once also came across the error : Sector 32 being in use by FlexNet.|| Strongly in need of booting my Win 7 without any formats or fresh OS installations. Thankful for any Diagnostics and Solutions to my problem.

  Read the article

• Free software for backing up an attached network drive

  - by Richard

  My wireless router comes with a USB connector which allows me to plug an external hard drive in and it'll act as a Network Attached Storage. The problem is that I want to backup this hard-drive to the external drive of another computer so that if the NAS drive fails, I don't lose everything. However, Windows 7 Backup refuses to include the NAS as a location to backup. I can't fool it by mapping it to a drive letter either. Google presents lots of pages on how to backup files to a NAS, but not the other way around. Can anyone advise me on free software which can do incremental backups of a NAS drive to an external drive attached the computer it is running on? I'm aware of this question but the top answers have one or more of the following issues: They aren't free. The free version cannot backup a NAS. They cannot do incremental backups. They're just a script and therefore have limited other functionality (eg. disk space management, scheduling, compression, etc.etc.)

  Read the article

• Hard Disk Spins Down as long as Battery is in Laptop

  - by Brock Dute

  Hi, I just figured out today that as long as the battery is in my laptop, it doesn't matter if it's fully charged while plugged in, Ubuntu always spins down my hard drive. I noticed this because there was a huge difference in speed when I removed the batteries. My settings for power management is basically: on AC power, don't spin down harddrive, dont suspend or anything on battery power, basically save as much power as possible I assumed that if I plug in my laptop, it'll use the On AC Power settings no matter what but apparently, this isn't so. Is there a way to "fix" this?

  Read the article

• Help slecting dedicated server with good disk I/O & network

  - by JP19

  Hi, I am looking for a cheap dedicated server. (I was earlier happy with VPS, untill I realized that the disk I/O is not at all reliable and depends on what your neighbours are upto at the moment). I was browsing through http://www.lowenddedi.net/the-database I don't understand memory speed and NIC speed columns at all. What will be their affect? Do I need to worry about them? Also, can someone help suggest a provider, with following criteria: 1) Good & reliable Network 2) Price <= $60/month. Thanks JP

  Read the article

• External SATA drive does not work without the optional USB cable *also* connected

  - by Software Monkey

  I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

  Read the article

• Accidentally dd'ed an image to wrong drive / overwrote partition table + NTFS partition start

  - by Kento Locatelli

  I screwed up and set the wrong output for dd when trying to copy a freenas iso, overwriting the wrong external hard drive. Ironically, I was trying to setup a freenas server for data backup... External drive is only used for data storage, system is entirely intact Drive had a single NTFS partition filing the entire device (2TB WD elements) Drive originally had an MBR partition table. Drive now shows as having a GPT, presumably from the freenas image. Drive was mounted at the time, with maybe a couple kB of data written/read after running dd Drive is just a few months old and healthy (regular SMART / fs checks) I have not reboot the OS (crunchbang) /proc/partition still holds the correct information (and has been stored) Have dd's output (records in / out / bytes) testdrive did not find any partitions on quick or deep search running photorec to recover the more important data (a couple recent plaintext files that hadn't been backed up yet). Vast majority of disk content ( 80%) is unnecessary media files. My current plan is to let photorec do it's thing, then recreate the mbr with gparted and use cfdisk to create another NTFS partition using the sector information from /sys/block/.../. Is that a good course of action (that is, a chance of success)? Or anything else I should try first? Possibly relevant information: dd if=FreeNAS-8.0.4-RELEASE-p3-x86.iso of=/dev/sdc: 194568+0 records in 194568+0 records out 99618816 bytes (100 MB) copied grep . /sys/block/sdc/sdc*/{start,size}: /sys/block/sdc/sdc1/start:2048 /sys/block/sdc/sdc1/size:3907022848 cat /proc/partitions: major minor #blocks name ** Snipped ** 8 32 1953512448 sdc 8 33 1953511424 sdc1 current fdisk -l output: WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 2000.4 GB, 2000396746752 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table

  Read the article

• KVM guest disk performance

  - by Alex

  My KVM guest does max. 200MB/s although the host does easily 700MB/s (Raid 0 with 4 SSDs). Configuration: File-based storage (raw), cache none. Host 24 cores, 96GB ram, Ubuntu 12.04.1 LTS and virt-manager. I suspect the CPU to be the bottleneck (one core goes up during hdparm). Anyone experienced the same or has an explanation ? Edit: one more info: guest is the same as host (Ubuntu 12). Same poor disk performance observed with Windows 2008 R2 and Suse Enterprise Linux (9 or 10 I think). Max 1 guest running.

  Read the article

• Moving Ubuntu to a new hdd

  - by jaurisan

  I have a 300gb hdd which I am currently using on my older PC. Now I want to have a copy of those 300GB into a new 1TB hdd (installed in a new computer). My "problem" is that the 1TB hdd already has a 50GB partition with a Win XP (the rest of the space is not partitioned). The 300GB disk has a 240GB partition for Ubuntu, and the rest is a FAT partition which I don't care if it gets copied or not to the new disk. So how can I transfer the entire Ubuntu to the new hard disk and still being able to boot the XP? Is there a way or tool that can help me do over LAN? So I wont have to take out the hdd from the new pc and put it in the older to do the copy.

  Read the article

• No inodes left error, df -i command says contrary

  - by abhinavkulkarni

  I copied a lot of files in my mounted Windows drive from Ubuntu and I subsequently ran into Error opening file '/media/windows/<some-file-path>': No space left on device error. I checked the output of df -i command to see if I had ran out of inodes for the mounted Windows drive: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda5 2363904 504119 1859785 22% / udev 207621 522 207099 1% /dev tmpfs 211487 450 211037 1% /run none 211487 3 211484 1% /run/lock none 211487 7 211480 1% /run/shm none 211487 19 211468 1% /run/user /dev/sda2 458686680 2588876 456097804 1% /media/windows As above output shows, lots of inodes are available for /media/windows drive. I have plenty of disk space left - around 500GB. What's the problem then?

  Read the article

• USB drive was bootable, but no longer boots

  - by i-g

  I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? I think it lost some pixie dust when I formatted it with the standard Windows formatting tool (it was quicker than deleting files), but I have no idea what it was or how to get it back. The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

  Read the article

• USB drive was bootable, but no longer isn't

  - by i-g

  I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

  Read the article

• Creating Ubuntu bootable disk on my phone

  - by Aerus

  I want to install Ubuntu 12.04 on my laptop but because I have a complete shortage of writable CDs and DVDs, I wan't to create a bootable USB stick (on Windows). However, the only USB stick I currently have lying around is my HTC phone (HTC Touch HD with 8Gb memory). I was following the Ubuntu guide to create a bootable usb stick with pendrivelinux, however in the last step it shows me that it wants to do more than just copying the .iso file to the USB drive: My question: can I safely proceed without wiping the current OS off my phone (Windows Mobile 6.1) and use it to install Ubuntu?

  Read the article

• Preseed Ubuntu installation with full disk encryption

  - by user249264

  I am trying to set up Ubuntu full disk encryption using preseeding. I was able to set things up correctly following the preseed file presented here. But I do not want to provide the default password in the preseed file. Is there a way to let ubiquity fall to the screen that asks for the encryption passphrase just like it does when the username is not provided in the preseed file? When I try to leave the passphrase option empty in the preseed file, I get an error in the installer saying "An error occured while creating the keyfile".

  Read the article

• INACCESSIBLE_BOOT_DEVICE after installing Linux on same drive

  - by kdgregory

  History: My PC was configured with two drives: an 80G on IDE 0 Primary that was running Win2K, and a 320G on IDE 0 Secondary that was running Linux (Ubuntu). I decided to pull the 80Gb drive out of the system, so dd'd the entire 80 G drive (/dev/sda) onto the 320 (/dev/sdb) -- this included the MBR and partition table. Then I pulled the drive, plugged the 320 into IDE 0 Primary, and rebooted. The Windows partition worked at this point. Then I installed Ubuntu into the remaining space on the 320. It works. However, when I try to boot into Windows, I get a BSOD with the following message: *** STOP: 0x0000007B (0x89055030,0xC000014F,0x00000000,0x00000000) INACCESSILE_BOOT_DEVICE Before the BSOD I see the Win2K splash screen, and it claims to be "starting windows" for a couple of seconds -- so it appears that the first stage boot loader is working as expected. Ditto when I try booting in Safe Mode. After reading the Microsoft KB article, I booted into the recovery console and tried running chkdsk /r. It refused to run, claiming that the drive was corrupted (sorry, didn't write down the exact error message). However, I can mount the drive from Linux, and access all files. And for what it's worth, I can scan the drive using the Linux "Disk Utility" (this is Ubuntu, the menus don't show real program names), it claims the drive to be clean. The KB article mentioned that boot.ini could be the problem, so here it is: timeout=10 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows 2000 Professional" /fastdetect Any pointers on what to do next?

  Read the article

• Why doesn't the installer see all of my hard drives?

  - by atodd

  I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed. I've also tried both the desktop and alternate amd64 installs with the same result.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >