Search Results

Search found 17018 results on 681 pages for 'floppy disk drive'.

Page 72/681 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Disk drive for / not ready on boot after upgrade from 10.04 to 12.04

    - by Mathieu M-Gosselin
    After upgrading (using the Upgrade button from the update manager) from 10.04.4 to 12.04.1, I cannot boot anymore. Upon booting, I am greeted with the Ubuntu logo and the error "The disk drive for / is not ready yet or not present". I have the option to wait, to skip and to access a basic shell. Waiting overnight did nothing, skipping just gives me the same error for /tmp, /home, then for a UUID and finally it just goes to a black screen with a white "_" in the top left corner. My setup is a dual boot one with XP on a single hard drive, I use separate partitions for / and /home. Back in the day I installed 8.04 directly from the CD while leaving a partition for XP, which I installed after. This setup had never caused any such issues, even when upgrading from 8.04 to 10.04. I have done plenty of research regarding this issue, as many others seem to have had similar issues after doing the same upgrade as me. However, while for most what fixed the problem was running: apt-get -f install after remounting / in read-write, it didn't do it for me. I got dependency errors (see here), which I also investigated. I found https://bugs.launchpad.net/ubuntu/+source/python-defaults/+bug/990740 where most people say the solution that worked is (prior to running the above command) running: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal but that also got me a lot of dependencies errors as output (see here), similar to #34 in the above thread. I also read that running: dpkg --configure -a could help, at first it wouldn't run because it had trouble parsing /var/lib/dpkg/status since there was an extra blank line in a package description (see https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/916799) but I removed it using vim (and then reran the command). It still gives me output that looks like an error, though. Here it is: http://paste.ubuntu.com/1338074/. I also tried re-running the above apt-get commands after that, to no avail. I'm running out of things to try in the hope of getting this fixed, your help would be very much appreciated! Thank you in advance.

    Read the article

  • 'dd' access to a drive

    - by John
    I've been working with making custom bootloader and kernel code (not necessarily Linux kernel). I'm putting the images on USB, and was using dd to place them on the sector they needed to be on, and I'm getting tired of burning the image to /dev/sda instead of /dev/sdb (effectively destroying my hard drive). So I was wondering if I could somehow give user access to the 'dd' command, but only to the /dev/sdb drive, so that if I accidentally type /dev/sda it won't let me, because I wouldn't have run the command as sudo or root.

    Read the article

  • Moved to SSD and now getting "the disk drive for / is not ready yet"

    - by dmt0
    I moved my Ubuntu 12.04 install over to an SSD drive. Copied all directories except for the ones most often written to - var, tmp, ... Reinstalled grub into SSD by booting with live CD and following the commands in this post: How to move Ubuntu to an SSD This seemed to work fine, because when I press "e" in grub menu, I see the expected UUIDs. But right after grub I get could not log bootup: Address already in use the disk drive for / is not ready yet or not present. If I skip, I get same for /tmp /run, and other dirs If I go into manual recovery and do mount -n -o remount,rw / it turns out that everything can mount no problem. Can't get my head around this one. My fstab seems right. grub is right. AHCI in bios is enabled. Why is this happening? What can I do to fix it? When I do drop into shell from this error and get to mount things manually, how do I get the OS to continue loading? Thank you guys for any ideas you can give me. Here's what my fstab looks like right now: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 UUID=67fc8a7a-f1db-485c-88bd-e007c214244f / ext4 defaults,noatime,discard 0 1 # swap was on /dev/sda3 during installation UUID=6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6 none swap sw 0 0 UUID=7397729b-2125-4b1d-b5eb-28866898d773 /hdd ext4 errors=remount-ro 0 1 /hdd/home /home none bind 0 0 /hdd/run /run none bind 0 0 /hdd/tmp /tmp none bind 0 0 /hdd/var /var none bind 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 output from blkid: /dev/sda1: LABEL="System Reserved" UUID="EABC56C1BC568849" TYPE="ntfs" /dev/sda2: UUID="7CCC6124CC60D9C2" TYPE="ntfs" /dev/sda3: UUID="6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6" TYPE="swap" /dev/sda5: UUID="7397729b-2125-4b1d-b5eb-28866898d773" TYPE="ext4" /dev/sdb1: UUID="67fc8a7a-f1db-485c-88bd-e007c214244f" TYPE="ext4" relevant from fdisk -l: Device Boot Start End Blocks Id System /dev/sdb1 2048 115345407 57671680 83 Linux

    Read the article

  • Sync Music to External Hard Drive with Windows Media Player

    - by dtbarne
    I'd like to sync my music from my internal hard drive to an external hard drive. Windows Media Player doesn't recognize my USB external hard drive as a syncable device. If I plug in any USB flash drive, it shows up as a device, but I can't seem to get it to recognize my external hard drive. Per some googling suggestions, the only suggestion I came across was to try enabling the "Portable Device Enumerator" service, but that yielded no luck. Is there any way to sync my music from WMP to an external hard drive?

    Read the article

  • Network Drive Via Ethernet Port for Speed?

    - by Yar
    I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

    Read the article

  • SQL Server database filled the hard drive and freeing up space isn't possible

    - by Jon
    I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

    Read the article

  • How to Boot from iRAM Solid State Drive on Ubuntu

    - by quickshiftin
    I've got an iRAM solid state drive. I'd like to use this to store a linux root filesystem; the trouble is the device is not recognized as a hard drive to the BIOS. It only shows up if a live CD environment is loaded and the scsi drivers are available (may be other drivers needed as well). I've heard of Boot to Ram and wonder if some variation of that could work here and I could run a linux install off the iRAM??

    Read the article

  • Laptop will boot to some usb flash drives but not others.

    - by evolvd
    Laptop: HP Compaq 6710b I can boot from usb just fine with the following usb flash drives: Cruzer micro 4GB HP 4GB The flash drive that will not boot: Flash Voyager 8GB To knock out variables I did the following: Using Hard Disk Low Level Format Tool I performed a low level format Full erase with Flash Memory Tookit In windows 7 I formated the drive to fat32 Used USB-Boot-Tester to write to the drive Also used uNetbooting with various distros to see if that would make a difference My guesses on what could be preventing the drive from booting: The laptop does not support booting to usb flash drives larger than 4GB The drive is defective in some way

    Read the article

  • grub installation in fatal error in jbod disk setting

    - by Vincent
    so i have this jbod drive, with two different partition partition A is for windows while B i would like to have ubuntu 12.04 in it however at the end of ubuntu installation, there is an error stating grub failed to install and a fatal error. i was given option as to where to install the grub, and i tried them all and all giving me the same fatal error here is one example of options given /dev/mapper/nvidia_eeffaace1 to my knowledge grub is supposed to be installed in /dev/sda but in jbod configuration, both sda and sdb isnt available please help me and thank you

    Read the article

  • zfs raidz1-0 corrupted data, all disk are online

    - by gkcr2d2
    my zfs pool "datas" is unavailable but all my disk are online, Do you know how the problem can be fixed? Thank you for your help. root@oxygen:~# zpool status pool: datas state: UNAVAIL scan: none requested config: NAME STATE READ WRITE CKSUM datas UNAVAIL 0 0 0 insufficient replicas raidz1-0 UNAVAIL 0 0 0 corrupted data scsi-SATA_ST3000DM001-9YN_W1F0LBVX ONLINE 0 0 0 scsi-SATA_ST3000DM001-9YN_W1F0KYX9 ONLINE 0 0 0 scsi-SATA_ST3000DM001-9YN_W1F0LCC8 ONLINE 0 0 0 scsi-SATA_ST3000DM001-9YN_W1F0LBXZ ONLINE 0 0 0

    Read the article

  • 'Unable to mount Filesystem' Error

    - by Charles
    Trying to extract data from a 'bricked' Western Digital MyBook Live 2tb drive. I came across a forum that advised to use Ubuntu (booted from a CD) on my Macbook. Managed to download and create a boot CD for Ubuntu (like this little operating system btw). Booted the machine with the CD and plugged the drive (which I had extracted from it's casing and placed into a external USB SATA case & plugged to the laptop). The drive is seen by Ubuntu but each time I click on the drive, it gives me the following error: Unable to mount 2.0 TB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog -try dmesg | tail or so I am new to this and spent quite some time searching this site to see if I could find a solution to this problem without troubling anyone. I came up with a few that came close but some of the questioners mentioned that they had lost data...which scared me from going further. I need to basically extract 1 particular folder from the drive. If I can get to mount this volume 'sdb4', there is a folder called 'My_Work' which I need to back up. The rest I have/had a copy of. When I typed in dmesg | tail...I got several lines..but I think ones that are relevant are: [ 406.864677] EXT4-fs (sdb4): bad block size 65536 [ 429.098776] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 439.786365] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 445.982692] EXT4-fs (sdb4): bad block size 65536 [ 1565.841690] EXT4-fs (sdb4): bad block size 65536 I read somewhere to try/check 'sudo fdisk -l /dev/sdb4'. It gave me the following result: Disk /dev/sdb44: 1995.8 GB, 1995774623744 bytes 255 heads, 63 sectors/track, 242639 cylinders, total 3897997312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb4 doesn't contain a valid partition table This is where I reached and got frustrated and decided to try & get help on this without digging myself deeper into a hole! I understand that the answer may already be out there. If so, could someone please point me in the right direction. And if not, could someone please resolve (if possible) my situation!

    Read the article

  • Shuttle FB51 mobo does not boot with external USB drive attached [closed]

    - by user127236
    I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

    Read the article

  • I get an "serious errors while checking the disk drives for /boot" error while booting

    - by Vaios Argiropoulos
    I have just set up my new system by creating three partitions on a whole hard disk (/boot,/home,swap and /(root)) .I saw this article and now i am getting those errors and the system provide me with some options (I to ignore, S to skip mounting or M for manual recovery). I am forced to choose skip mounting because i don't know what manual recovery is. Despite the error i get i think that the system boots ok because i can use the system but this error is very annoying.

    Read the article

  • Cannot read/write a second drive in MBP 13

    - by Carlos
    I changed my original HDD for a SDD earlier this year and I just got one more SSD for my MBP 13 (2012) that I used to replace DVD drive. I'm using Mountain Lion. The SSD looks to be recognized allright, but I can't format it. Then I removed the main drive and tried the new one as the main drive and did the boot using a USB drive with MAC OS and everyhing worked as it should (like I just had one drive). However when I bring the first drive back together with the second they both show up but I can't use it. Seems like I have no permission, but when I look at it's properties it says I can read and write to it. Any ideas? Thanks a lot!

    Read the article

  • How to clone a USB flash drive using dd?

    - by MentalBlister
    Using 'dd' to clone a USB drive -cfdisk: resized the destination partition to be of same size made the partition bootable same 'type' ext3 ran 'mkfs.ext3' after exit cfdisk then dd if=dev/sda1 of=/dev/sdb1 result booting: Missing operating system. The source USB device boots on multiple laptops USB destination filesystem looks the same.... Any idears?

    Read the article

  • Linux WD EARS Advanced Hard Drive Format

    <b>LinuxConfig:</b> "Nowadays hard drive manufactures are switching to a new hard drive technology which uses 4KB sectors size instead of conventional 512B. This new technology requires little tweaks to get a better performance in comparison to out-of-the-box settings."

    Read the article

  • How to turn a folder into USB drive / mass storage?

    - by FernandoSBS
    I have a plasma TV with USB input (can play divx and etc) but what I would like to do is use a software to turn a folder in my notebook HD (windows 7) into a USB Mass Storage device, so that I can connect the TV to the PC using a USB cable so that the TV recognize the PC folder as a flash drive / usb mass storage. is seems MAC has something like what I need: http://support.apple.com/kb/ht1661 So there must be a similar to windows!

    Read the article

  • why does ubuntu not recognise hard drive on windows 7

    - by kingsley osime
    Im trying to install ubuntu on window 7 virtual PC, when I boot to the ubuntu ISO image just before the partitioning stage where ubuntu confirms you have at leaset 4GB hard drive space the installer puts a cross on requirement indicating system does not have required amount of space... however I have a 220GB hard drive with 20GB used to create the virtual disk..Its all a bit weird as I can't seem figure it out

    Read the article

  • Is there a USB 3.0 memory stick / thumb drive?

    - by jasondavis
    The new PC I just finished building has USB 3.0 support. I use a USB stick/thumb drive all the time on my PC for stuff, is there an equivalent available anywhere for USB 3.0? Please list one product per post, and provide a link to the manufacturer's product page. Also see the eSATA version of this question.

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >