Search Results

Search found 13082 results on 524 pages for 'ip camera'.

Page 75/524 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• Ubuntu 11.04 Static IP doesn't take

  - by mrduclaw

  I'm trying to set a static IP address in Ubuntu 11.04. I did a server install. I edited my /etc/network/interfaces file to include: auto eth0 iface eth0 inet static address 10.0.0.100 netmask 255.255.255.0 gateway 10.0.0.1 When I do a /etc/init.d/networking restart this appears to take. After awhile though, that 10.0.0.100 will turn into something dished out by the DHCP server. My problem appears to be similar to this: Ubuntu intrepid - static IP networking keeps restarting with DHCP But I don't have Gnome installed. Is there anything else that's running in the background that could be doing this? And if so, how do I disable it?

  Read the article

• Exchange 2007 automatically adding IP to block list

  - by Tim Anderson

  This puzzled me. We have all mail directed to an ISP's spam filter, then delivered to SBS 2008 Exchange. One of the ISP's IP numbers suddenly appeared in the ES2007 block list, set to expire in 24 hours I think, so emails started bouncing. Quick look through the typically ponderous docs, and I can't see anything that says Exchange will auto-block an IP number, but nobody is admitting to adding it manually and I think it must have done. Anyone know about this or where it is configured? Obviously one could disable block lists completely but I'd like to know exactly why this happened.

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

• Windows Firewall 2008 Server - Allow only given IP in, block all others

  - by chumad

  I've got a Windows 2008 Server. It has the built-in windows firewall on it. I've played around with the Advanced settings where I can setup inbound/outbound rules, but it doesn't appear that I can create a rule that would say "Block All incoming traffic except traffic coming from this IP address" I created a rule that Blocks All, but there's no way that I've found to create a rule that will "override" the block rule and allow 1 or more IP's to get in. I accomplished this on a Win2k box using IPSEC, but it seems that IPSEC is now built-in to windows firewall. Any tips?

  Read the article

• Retrieve Ip Adress

  - by kareemsaad

  I want any way to know who take my IP from my network place in my company

  Read the article

• Exchange 2007 automatically adding IP to block list

  - by Tim Anderson

  This puzzled me. We have all mail directed to an ISP's spam filter, then delivered to SBS 2008 Exchange. One of the ISP's IP numbers suddenly appeared in the ES2007 block list, set to expire in 24 hours I think, so emails started bouncing. Quick look through the typically ponderous docs, and I can't see anything that says Exchange will auto-block an IP number, but nobody is admitting to adding it manually and I think it must have done. Anyone know about this or where it is configured? Obviously one could disable block lists completely but I'd like to know exactly why this happened.

  Read the article

• Changed domain A records for new static ip, but no mail

  - by Tim the Enchanter

  We have recently changed our ISP, I have changed the mail and mailserver DNS A records for our domain name to point to the new external static IP address assigned to the router by the new ISP (the MX record points to mail.<mydomain> as always) but I am not getting any email (though sending email works). Do I just have to wait will the change propagates? I am slightly concerned because I can connect to the web email service made visible through the new router which suggests that the mail.<mydomain> static I.P. address change has happened. Have I missed something?

  Read the article

• How to make ssh match known_hosts to host/ip:port instead of just host/ip?

  - by Prody

  I have two machines behind a firewall, with the ssh ports forwarded to 2201 and 2202. When I ssh host -p 2201 it asks if I trust the machine, I say yes, it gets added to ~/.ssh/known_hosts Then I ssh host -p 2202 it doesn't let me, because there's already a known_host for this IP in ~/.ssh/known_host:1 (the file was empty when I started, so line 1 is the one added by the previous ssh run) This happens on CentOS 5.4. On other distros (I've tried Arch), it appears that ssh matches the knwown_hosts to the ports too, so I can have multiple fingerprints for multiple ports on the same host/ip without any problems. How can I get this same behavior for CentOS? I couldn't find anything in man ssh_config. (or at least not without disabling fingerprint checking)

  Read the article

• Set up homeserver with single IP to host multiple sites on Ubuntu [closed]

  - by Ortix92

  I am trying to set up my homeserver so it can function as a regular server one would rent. I am running Ubuntu 12.04 LTS with openpanel. I have a single static IP address. I am used to having two addresses and pointing them to NS1.domain.tld and NS2.domain.tld and setting up the propper DNS records. I would also like to mention I am somewhat new to DNS zones. Either way, how would I go about setting this up correctly (in openpanel) with just a single IP address if possible at all? I have also read about free solutions online, but I would like to keep everything secure and private so other people can't peer into my data somehow. Thanks!

  Read the article

• iptables change destination IP without DNAT

  - by Mad_Ady

  Hello, I'm trying to workaround a broken application which insists on connecting to the private address (and thus unreachable) of a server, instead of connecting to the public address (even if the relevant port is open). Changing the application is not an option. I'm trying to add iptables rules on the client(s) to change the destination ip for the packets going to 192.168.251.3 to go to 1.2.3.4 instead. DNAT isn't working since 1.2.3.4 is not an IP on any of my client interfaces. Can anyone point me to the relevant documentation that allows me to use MANGLE to change destination IPs?

  Read the article

• find wireless-repeater ip (router)

  - by Brtrnd

  Really long time ago I set up my dd-wrt router up as a repeater. It works well; in the summer I place it near the garden and I have wifi in the garden. I would like to revisit te settings and see if it would be a good idea to install openvpn. The problem is: I don't remember the ip of the router. I probably followed the setup instructions on the dd wrt wiki. it doesn't show up on the management-console of my main router (a docsis3 modem); it doesn't show up if I do an IP scan of the whole class B; it doesn't show as the gateway when i connect to it (wired or wireless). Any ideas on how I could find the web-interface?

  Read the article

• Security against IP spoofing [on hold]

  - by user1369975

  I am pursuing a college project, in which I am running three fake services on three ports to protect the main service (say running at port 80). The concept is that if the user is malicious, he'll try to bring the services down and access the fake services. These ports adopt a blocking process of a connection request and record the IP and port of the client. These are logged and aren't granted access on service on port 80. But what to do if the client spoofs his IP? How can I modify my system?

  Read the article

• Best way to log internet traffic for office network via remote IP

  - by buzzmonkey

  We have a network of about 40 machines running either Win XP or 7 in our office via LAN switches into 1 x Netgear Router (WNDR3700). We have noticed recently that our local network has been added to the CBL Blacklist due to one of our machines being infected with Torpig. I have attempted to use Kaspersky's TDSSKiller Antirootkit Utility to find the infected machine but all appear to be clear. The CBL register advises to find the local machine which is connection to the remote IP address (CBL has provided the range). However, our router does not have the ability to block remote IP addresses - does anyone know of a software which can log all the internet traffic, which we can then use to find the infected machine.

  Read the article

• direct url to server ip address and port

  - by AM0

  We have a Windows 2012 dedicated server. There’s a custom service running on port xxxxx which accepts connections from our custom built hardware devices over TCP/IP port. As of now we use servername.serverdomain.com:xxxxx to connect to the service and start communication. However, we prefer to use URL instead of server’s name or IP Address. So we got a custom url and set its name servers to point to dedicated server. However, just setting DNS doesn’t seem to be working. Could someone please guide as to how to get it working? UPDATE In short I want www.custom-url.com being forwarded to servername.serverdomain.com:xxxxx. These requests are coming from hardware and not browser.

  Read the article

• How to allow all traffic from 1 IP address Windows Firewall

  - by Foo_Chow

  I am trying to give another PC completely unrestricted access to my machine. They are both on the same subnet. What I am looking for is effectively disabling the firewall entirely for one IP address. Example Host: 192.168.1.2 Client: 192.168.1.3 Firewall "off" World: xxx.xxx.xxx.xxx Firewall "on" To be specific I am running "Easy"PHP as a testing server for websites and want to access them from other machines on my network. After tinkering I figure the method suggested in my question would be best to make things actually easy. PS. I have already tried opening all ports both inbound and outbound to that IP with no results. My only current success has been actually turning the whole firewall off.

  Read the article

• Several IPs for my VPS

  - by Serafim

  I bought vps on santrex.net but can't receive any reply from support. My Problem: I have 5 ip but it pings only 1!!! I can't setup DNS because I need 2 ip minimum . Could you help me to activate other my IPs? root@spnova:~# ifconfig eth0 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.100 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163342 errors:0 dropped:0 overruns:0 frame:0 TX packets:13585 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32862185 (32.8 MB) TX bytes:15189036 (15.1 MB) eth0:0 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.101 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.102 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:2 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.103 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:3 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.104 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:11885 errors:0 dropped:0 overruns:0 frame:0 TX packets:11885 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8124693 (8.1 MB) TX bytes:8124693 (8.1 MB) root@spnova:~# nano /etc/network/interfaces # Auto generated eth0 interfaces auto eth0 lo iface eth0 inet static address 188.72.240.100 netmask 255.255.255.0 up route add -net 188.72.225.0 netmask 255.255.255.0 dev eth0 up route add default gw 188.72.225.1 iface lo inet loopback auto eth0:0 iface eth0:0 inet static address 188.72.240.101 netmask 255.255.255.0 auto eth0:1 iface eth0:1 inet static address 188.72.240.102 netmask 255.255.255.0 auto eth0:2 iface eth0:2 inet static address 188.72.240.103 netmask 255.255.255.0 auto eth0:3 iface eth0:3 inet static address 188.72.240.104 netmask 255.255.255.0

  Read the article

• F5 Networks iRule/Tcl - Escaping UNICODE 6-character escape sequences so they are processed as and r

  - by openid.malcolmgin.com

  We are trying to get an F5 BIG-IP LTM iRule working properly with SharePoint 2007 in an SSL termination role. This architecture offloads all of the SSL processing to the F5 and the F5 forwards interactive requests/responses to the SharePoint front end servers via HTTP only (over a secure network). For the purposes of this discussion, iRules are parsed by a Tcl interpretation engine on the F5 Networks BIG-IP device. As such, the F5 does two things to traffic passing through it: Redirects any request to port 80 (HTTP) to port 443 (HTTPS) through HTTP 302 redirects and URL rewriting. Rewrites any response to the browser to selectively rewrite URLs embedded within the HTML so that they go to port 443 (HTTPS). This prevents the 302 redirects from breaking DHTML generated by SharePoint. We've got part 1 working fine. The main problem with part 2 is that in the response rewrite because of XML namespaces and other similar issues, not ALL matches for "http:" can be changed to "https:". Some have to remain "http:". Additionally, some of the "http:" URLs are difficult in that they live in SharePoint-generated JavaScript and their slashes (i.e. "/") are actually represented in the HTML by the UNICODE 6-character string, "\u002f". For example, in the case of these tricky ones, the literal string in the outgoing HTML is: http:\u002f\u002fservername.company.com\u002f And should be changed to: https:\u002f\u002fservername.company.com\u002f Currently we can't even figure out how to get a match in a search/replace expression on these UNICODE sequence string literals. It seems that no matter how we slice it, the Tcl interpreter is interpreting the "\u002f" string into the "/" translation before it does anything else. We've tried various combinations of Tcl escaping methods we know about (mainly double-quotes and using an extra "\" to escape the "\" in the UNICODE string) but are looking for more methods, preferably ones that work. Does anyone have any ideas or any pointers to where we can effectively self-educate about this? Thanks very much in advance.

  Read the article

• Swap static public IPs without creating DNS conflicts?

  - by Jakobud

  Our ISP is Comcast and we have 5 static public IPs from them that we use for various services, including customers connecting to our network, VPN, web, DNS, etc... We need more IP addresses from Comcast. Unfortunately, Comcast is telling us that they can't just simply give us 5 more addresses. They only give static IP addresses in blocks of 1, 5 or 13. In order for us to get more static IPs, they have to take away our current 5 static IPs and give us 13 new ones. How do we make this transition without causing all sorts of DNS chaos? We run public DNS servers, so we can make the DNS changes ourselves, but it will take some time obviously for those DNS changes to propagate throughout the internet. Are there any easy ways to make this transition? Like create some type of fallback DNS entry or something? Surely there must be some sort of procedure for this kind of thing. The Comcast support guy was useless.

  Read the article

• weird routes automatically being added to windows routing table

  - by simon

  On our windows 2003 domain, with XP clients, we have started seeing routes appearing in the routing tables on both the servers and the clients. The route is a /32 for another computer on the domain. The route gets added when one windows computer connects to another computer and needs to authenticate. For example, if computer A with ip 10.0.1.5/24 browses the c: drive of computer B with ip 10.0.2.5/24, a static route will get added on computer B like so: dest netmask gateway interface 10.0.1.5 255.255.255.255 10.0.2.1 10.0.2.5 This also happens on windows authenticated SQL server connections. It does not happen when computers A and B are on the same subnet. None of the servers have RIP or any other routing protocols enabled, and there are no batch files etc setting routes automatically. There is another windows domain that we manage with a near identical configuration that is not exhibiting this behaviour. The only difference with this domain is that it is not up to date with its patches. Is this meant to be happening? Has anyone else seen this? Why is it needed when I have perfectly good default gateways set on all the computers on the domain?!

  Read the article

• Which MAC address is the right one?

  - by Paul Dinh

  Result by 'getmac': C:\>getmac Physical Address Transport Name =================== ========================================================== 72-03-C6-48-59-34 \Device\Tcpip_{8AEB3263-18C4-449E-A80F-BC2541DDC2A9} 00-21-9B-D5-6F-EE \Device\Tcpip_{C2F9CE19-D68F-4105-9766-45CBE6D82331} 00-22-68-D2-9B-F7 \Device\Tcpip_{A2701130-9221-43FE-8F14-7B1114F84DC3} Result by 'ipconfig /all': C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : xps-m1530 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-22-68-D2-9B-F7 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.246.4 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Eth ernet Controller Physical Address. . . . . . . . . : 00-21-9B-D5-6F-EE Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.112 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 8.8.4.4 Lease Obtained. . . . . . . . . . : 01 November 2012 9:00:36 AM Lease Expires . . . . . . . . . . : 04 November 2012 9:00:36 AM There is a MAC address on the back of my laptop, but the sticker is no longer there. So I use the 'getmac' command to get the MAC addresses. But which address shown by 'getmac' above is the one matching the MAC in the sticker on the back of my laptop? Or am I mistaken something? 00-21-... is the ethernet adapter, 00-22-... is the wireless adapter, and 72-03-... is what?

  Read the article

• 2 subnets off of 1 PC with 2 NICs

  - by Jeff

  I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

  Read the article

• Issues using gmail with google apps and external domain

  - by Jonathan Kelly

  I have recently tried to use gmail through google apps as my main email client, but I'm experiencing a few different problems. I am managing the domain (conjunktiondesign.co.uk) through 123reg.co.uk but it is hosted through fasthosts.co.uk. I transfered the domain to 123reg as fasthosts did not allow me to change the MX records myself. I followed the setup instructions step by step on google apps and changed the MX records as they told me to. My email was now working perfectly but my website was down and I was getting the following error: The dnsserver returned: No DNS records I have a friend that is using the same system as me (ie. Externally hosted domain and google apps mail) and I changed my 123reg details to the same that he had (as his was working perfectly - both email and website). I changed my name servers to point to fasthosts, rather than 123reg and I added an A record called '@' pointing to fasthosts IP address. I also created another A record called 'www' pointing to fasthosts IP address. After I did this, my website worked almost immediately but I have only realised that since changing it my email is now down. I have not received anything since Saturday. I am a web designer and would consider myself fairly tech savvy, but I have no idea about A records, CNAME's and all the things I have been messing about with! What I ultimately need is someone to help me get my email and website working at the same time, rather than one being down when the other is OK. I seem only able to get one or the other working. I have now changed the name servers back to 123reg in an attempt to get my email back as it is more important than my website at this stage. Any help is much appreciated. Thanks.

  Read the article

• How can the route between two private IPs go via public IPs?

  - by Gilles

  I'm trying to understand what this output from traceroute means. I changed the IP addresses for privacy but retained the public/private IP range distinction. traceroute.db -e -n 10.1.1.9 traceroute to (10.1.1.9), 30 hops max, 60 byte packets 1 10.0.0.1 0.596 ms 0.588 ms 0.577 ms 2 10.0.0.2 1.032 ms 1.029 ms 1.084 ms 3 10.0.0.3 3.360 ms 3.355 ms 3.338 ms 4 23.0.0.4 3.974 ms 4.592 ms 4.584 ms 5 23.0.0.5 13.442 ms 13.445 ms 13.434 ms 6 45.0.0.6 13.195 ms 12.924 ms 12.913 ms 7 67.0.0.7 52.088 ms 51.683 ms 52.040 ms 8 10.1.1.8 46.878 ms 44.575 ms 44.815 ms 9 10.1.1.9 45.932 ms 45.603 ms 45.593 ms The first 10.0.* range is inside my organisation. The last 10.1.* range is another site of my organisation. The intermediate addresses belong to various ISPs. I expect that there is some kind of VPN between the two sites, but I don't know much about our network topology. What I don't understand is how the route can go from a private address through public addresses back into private addresses. Searching led me to Public IPs on MPLS Traceroute, which gives a possible explanation: MPLS. Is MPLS the only possible or most likely explanation? Otherwise what does this tell me about our network infrastructure? Bonus question for my edification: in this scenario, who is generating the ICMP TTL exceeded packets and if relevant mangling their source and destination addresses?

  Read the article

• Separated virtual networks with same subnet range with 2 interface

  - by Coolpet

  I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >