Search Results

Search found 2539 results on 102 pages for 'karthi 27'.

Page 75/102 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How to reinstall OEM Windows 98 SE?

  - by Sammy

  I'm trying to install Windows 98 SE on an old PC and it's not going well. I run into this problem. Searching for Boot Record from Floppy..OK Starting Windows 98... TOSHIBA Enhanced-IDE CD/DVD-ROM Device Driver (ATAPI) Version 2.24 (C)Copyright Toshiba Corp. 1995-1999. All rights reserved. Device Name : TOSCD001 Number of units : 1 MSCDEX Version 2.25 Copyright (C) MIcrosoft Corp. 1986-1995. All rights reserved. Drive Z: = Driver TOSCD001 unit 0 TOSHIBA MACHINE Invalid drive specification Path not found - C:\TOOLS\CDROMDRV.SYS Invalid drive specification Invalid drive specification After that last line, it leaves me at a bitmap image displaying instructions to reboot with Ctrl+Alt+Del. It doesn't say why I have to reboot, and it doesn't state any error type, it just want's me to reboot for no apparent reason. After reboot, it just boots up from Floppy again and it cycles through the same thing all over again. The computer has been restored to original specification. Original system recovery "CD-ROM" discs are available and they are not scratched or anything, they are in very good condition. It's a set of 3 CDs, and the first disc labeled "1/3" should be the one holding the OEM version of Windows 98 SE. There is also a boot disk for Windows 98. I'm not sure what the other two discs are for. This computer came with three language support, so those could be holding different language versions or additional OEM discs. But I'm quite sure that the first disc holds the main operating system. BIOS has been set to optimized defaults. Boot priority is as follows; Floppy, IDE-0, CD-ROM. Under Standard CMOS settings, BIOS scans and autoconfigures both the hard drive and the CD/DVD drive. On POST it finds them both, and it finds the DOS bootdisk and starts preparing for installation, as you can see above. So what's this "invalid drive specification" about? Why isn't the installation starting? Updates Update 1 Booting from CD disc 2 In desperation I tried booting from the second CD. Boot order was; Floppy, CD-ROM, IDE-0. It boots normally from floppy disk, just like above, but then returns following. File not found - Z:\3LNGINST\TOOLS\PARTINFO.TXT I accidentally pressed some key on the keyboard, and before I knew it, the following screen showed up. Create Primary DOS Partition Current fixed disk drive: 1 Verifying drive integrity, 16% complete. After completion another screen showed up. Create Primary DOS Partition Current fixed disk drive: 1 Do you wish to use the maximum available size for a Primary DOS Partition and make the partition active (Y/N)?....................? [Y] Verifying drive integrity, 7% complete. I didn't choose Yes, it was set automatically. After completion the computer was automatically rebooted. Then I got a new screen. This is in Norwegian/Swedish/Finnish. Here's the message in Swedish. Hårddisken är inte klar för återställning av programvara. Installationsprogrammet måste skapa nya partitioner (C:, D:, ...). VARNING! ALLT INNEHÅLL PÅ HÅRDDISKEN KOMMER ATT RADERAS! Tryck på en tangent om du vill fortsätta (eller CTRL-C för att avbryta). Let me translate that. Hard drive is not ready for restoring the software. Setup program has to create new partitions (C:, D:, ...). WARNING! ALL CONTENTS ON THE HARD DRIVE WILL BE ERASED! Press any key to continue (or CTRL-C to cancel). I pressed Enter and it started formatting the hard drive. WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE c: WILL BE LOST! Proceed with Format (Y/N)?y Formatting 14,67.53M 1 percent completed. It automatically sets the "y" option and starts formatting. Rebooting with CD disc 1 After completing this operation it rebooted automatically. I inserted CD disc 1 and there was no issue with "invalid drive specification" anymore. Instead, a bitmap menu was displayed where it asked me to choose a language. And I thought I had it there for a while but it didn't work out. After choosing the language, another menu was displayed asking me to choose a type of recovery (restore pre-installed software OR restore hard drive partitions and pre-installed software). I opted for the second option. Then a data destruction warning showed up where I just pressed 1 to Continue. It did something and then just rebooted and the same formatting screen shows up as before. So something is not right. Am I doing it wrong? I seem to have come past the CD-ROM driver issue at least. But now I'm stuck with this problem... it seems to have something to do with the hard drive. Like... why is is it always trying to format it? Isn't it enough to format it once? By the way, it needs to be formatted as FAT32, right? Windows 98 doesn't support NTFS? I think FDISK should have taken care of this already. I know this is an old hard drive, but I connected to my main computer and it was able to read and write to it without a problem. It does have bad sectors though, but it's expected on an old hard drive like this. Any ideas?.. Update 2 I seem to be repeatedly getting stuck at the format screen where it asks to press any key to continue. So tried to cancel it this time with Ctrl+C. This leaves me at: A:\TOOLS> I can do DIR and CD and I tried to change to Z: drive. I tried running "setup" but there is no such thing. Z:\>setup Bad command or file name Update 3 Floppy structure Here's the file/folder structure of the floppy disk. A:\>dir /s Volume in drive A has no label. Volume Serial Number is 1700-1069 Directory of A:\ 1999-10-11 10:44 <DIR> BMP 1998-05-11 22:01 93 880 COMMAND.COM 1999-10-11 10:44 <DIR> factory 1999-10-11 10:44 <DIR> lang 1999-10-11 10:44 <DIR> TOOLS 2000-05-19 15:32 339 CONFIG.SYS 1999-10-26 13:38 0 BOOTLOG.TXT 2000-06-08 08:32 3 691 AUTOEXEC.BAT 4 File(s) 97 910 bytes Directory of A:\BMP 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 0 File(s) 0 bytes Directory of A:\factory 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 2000-06-08 13:09 2 662 3LNGINSF.BAT 1 File(s) 2 662 bytes Directory of A:\lang 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 1998-11-24 08:02 49 575 FORMAT.COM 1998-11-24 08:02 63 900 FDISK.EXE 2 File(s) 113 475 bytes Directory of A:\TOOLS 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 1998-05-06 22:01 49 575 FORMAT.COM 1995-10-27 20:29 28 164 BMPVIEW.EXE 1999-01-26 15:54 15 MAKEPA32.TXT 1998-05-06 22:01 3 878 XCOPY.EXE 1998-05-06 22:01 41 472 XCOPY32.MOD 1998-05-06 22:01 33 191 HIMEM.SYS 1998-05-06 22:01 125 495 EMM386.EXE 1998-05-06 22:01 18 967 SYS.COM 1996-01-31 21:55 18 CLK.COM 1994-04-02 08:20 22 HARDBOOT.COM 1999-02-03 15:46 15 MAKEPA16.TXT 1999-04-14 16:36 7 840 PARTFO32.EXE 2000-05-19 15:01 1 169 PARTFORM.BAT 1996-10-02 01:47 1 642 MBRCLR.COM 1999-07-01 11:58 8 175 BIOSCHKN.EXE 1998-06-23 08:55 5 904 PAR-TYPE.EXE 1998-11-24 08:02 29 271 MODE.COM 1998-11-24 08:02 15 252 ATTRIB.EXE 1998-11-24 08:02 19 083 DELTREE.EXE 1999-04-21 15:01 23 304 NTBB.EXE 1997-05-07 14:19 1 SYS.TXT 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-11 20:01 34 566 KEYBOARD.SYS 1998-05-11 20:01 19 927 KEYB.COM 1999-10-26 14:31 910 partinfo.txt 1998-06-16 15:58 5 936 CHKDRVAC.EXE 1998-05-06 22:01 63 900 FDISK.EXE 1998-05-06 22:01 45 379 SMARTDRV.EXE 1992-12-03 19:48 10 695 SCISET.EXE 1997-06-25 15:49 6 YENT 1998-05-06 22:01 25 473 MSCDEX.EXE 1998-05-06 22:01 5 239 CHOICE.COM 1997-07-18 17:41 6 876 MBR.COM 1997-07-01 15:01 6 545 CHK2GB.COM 1998-06-10 20:04 8 128 PARTFORM.EXE 1990-01-04 02:09 19 MAKEPAR2.TXT 1990-01-04 01:00 27 MAKEPAR3.TXT 1990-01-04 01:00 27 MAKEPAR4.TXT 1998-02-13 13:47 15 MAKEPART.TXT 1999-04-14 13:47 5 200 DISKSIZE.EXE 1999-05-06 14:56 7 856 PARTFO16.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 42 File(s) 734 463 bytes Total Files Listed: 49 File(s) 948 510 bytes 12 Dir(s) 268 800 bytes free A:\> CONFIG.SYS contents Here's the content of CONFIG.SYS. DEVICE=A:\TOOLS\HIMEM.SYS /TESTMEM:OFF REM I=B000-B7ff for Desktop BIOSes rem DEVICE=A:\TOOLS\EMM386.EXE NOEMS I=B000-B7ff x=C000-D000 DEVICE=A:\TOOLS\EMM386.EXE NOEMS x=C000-D000 DEVICE=A:\TOOLS\CDROMDRV.SYS /D:TOSCD001 BUFFERS=10 FILES=69 DOS=HIGH,UMB STACKS=9,256 LASTDRIVE=Z SWITCHES=/F SHELL=A:\COMMAND.COM /P /E:2048 AUTOEXEC.BAT contents :BEGIN @ECHO OFF PATH=A:\;A:\TOOLS; MSCDEX /D:TOSCD001 /L:Z /M:10 smartdrv 1024 128 SET TOOLS=A:\TOOLS SET COMSPEC=A:\COMMAND.COM SET EXITDRIVE=C: SET EXITPATH=\ CALL Z:\SETENV.BAT > NUL :TOSHCHK BIOSChkN IF NOT ERRORLEVEL 1 goto C_ACCESS BMPVIEW Z:\3LNGINST\BMP\NO_TOSP3.bmp /X=120 /Y=80 PAUSE > NUL SET EXITDRIVE=A: GOTO END :C_ACCESS CALL PARTFORM.BAT :C_EMPTY IF EXIST C:\*.* GOTO C_NOTEMPTY call z:\setenv.bat>nul goto PREPDU :C_NOTEMPTY REM ------------------MENU------------------------ :STARTMENU CLS BMPVIEW Z:\3LNGINST\BMP\LANGSELC.BMP /X=120 /Y=120 CLK CHOICE /C:123 /N >NUL REM L is the language that is selected IF ERRORLEVEL 1 SET L=%LNG1% IF ERRORLEVEL 2 SET L=%LNG2% IF ERRORLEVEL 3 SET L=%LNG3% SET BMP=BMP%L% BMPVIEW Z:\3LNGINST\%bmp%\HDDMENU.BMP /X=72 /Y=82 CLK CHOICE /C:129F /N > NUL IF ERRORLEVEL 4 GOTO FACTORY_MENU IF ERRORLEVEL 3 GOTO EXIT_MENU IF ERRORLEVEL 2 GOTO PARTFORM_MENU IF ERRORLEVEL 1 GOTO FORMAT_MENU GOTO END :FACTORY_MENU BMPVIEW Z:\3LNGINST\%bmp%\qformat.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO FORMATF GOTO END :EXIT_MENU BMPVIEW Z:\3LNGINST\%bmp%\9.bmp /XC /X=96 /Y=267 choice /C:1pause /T:1,01 >nul SET EXITDRIVE=A: SET EXITPATH=\lang cls mode mono rem keyb xx>nul cls GOTO END :PARTFORM_MENU BMPVIEW Z:\3LNGINST\%bmp%\2.bmp /XC /X=96 /Y=216 choice /C:1pause /T:1,01 >nul BMPVIEW Z:\3LNGINST\%bmp%\partform.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO PART_FORM SET EXITDRIVE=A: GOTO END :FORMAT_MENU BMPVIEW Z:\3LNGINST\%bmp%\1.bmp /XC /X=96 /Y=165 choice /C:1pause /T:1,01 >nul BMPVIEW Z:\3LNGINST\%bmp%\qformat.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO FORMAT SET EXITDRIVE=A: GOTO END REM ------------------ MENU END ------------------------ :FORMAT bmpview Z:\3LNGINST\%bmp%\1.bmp /XC /X=145 /Y=235 choice /C:1pause /T:1,01 >nul CLS IF (%QFORMAT%)==(NO) GOTO FULLFO FORMAT C: /Q /V:"" <A:\TOOLS\YENT >NUL call z:\setenv.bat>nul goto PREPDU :FULLFO FORMAT C: /V:"" <A:\TOOLS\YENT call z:\setenv.bat>nul goto PREPDU :FORMATF CLS IF (%QFORMAT%)==(NO) GOTO FULLFO_F FORMAT C: /Q /V:"" <A:\TOOLS\YENT >NUL call z:\setenv.bat>nul goto PREPDU_F :FULLFO_F FORMAT C: /V:"" <A:\TOOLS\YENT call z:\setenv.bat>nul goto PREPDU_F :PART_FORM bmpview Z:\3LNGINST\bmp\1.bmp /XC /X=145 /Y=235 choice /C:1pause /T:1,01 >nul MBR /! HARDBOOT REM ====================== Triple Select ====================== :PREPDU XCOPY z:\3LNGINST\*.* C:\*.* /E /S /V >NUL ATTRIB -H -R -S C:\TOOLS\CDROMDRV.SYS COPY A:\TOOLS\CDROMDRV.SYS C:\TOOLS /Y SYS C: >NUL goto REBOOT :PREPDU_F copy A:\TOOLS\SMARTDRV.EXE C:\ /Y ATTRIB -H -R -S C:\SMARTDRV.EXE copy A:\FACTORY\3LNGINSF.bat c:\ c:\3LNGINSF.bat cls REM ====================== Dual Select END ====================== REM --------------- END ------------------ :REBOOT SMARTDRV.EXE /C bmpview Z:\3LNGINST\BMP\reboot3.bmp /X=120 /Y=140 :FOREVER pause >nul goto FOREVER :END SMARTDRV.EXE /C %EXITDRIVE% cd %EXITPATH% echo on CD structure S:\>dir /s Volume in drive S is T3ELK4SC Volume Serial Number is 2042-5BC9 Directory of S:\ 2000-08-22 14:14 <DIR> 3LNGINSF 2000-08-22 14:14 <DIR> 3LNGINST 2000-06-15 15:57 <DIR> CRC 2000-06-15 12:04 387 667 767 T310C1NO.W98 2000-09-07 15:36 273 setenv.BAT 2 File(s) 387 668 040 bytes Directory of S:\3LNGINSF 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1999-10-27 10:51 1 806 AUTOEXEC.BAT 2000-08-22 14:14 <DIR> BMP 2000-05-19 15:29 265 CONFIG.SYS 2000-08-22 14:14 <DIR> POSTINST 2000-08-22 14:14 <DIR> TOOLS 2000-08-22 14:14 <DIR> WIN98SYS 2 File(s) 2 071 bytes Directory of S:\3LNGINSF\BMP 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1999-01-04 02:38 718 3.BMP 2000-07-05 11:22 60 118 Cdchg2.bmp 2000-07-05 11:22 60 118 Cdchg3.bmp 2000-07-05 13:37 60 118 Fin.bmp 2000-07-06 14:18 120 118 Menu.bmp 2000-07-05 13:34 60 118 Nor.bmp 2000-07-05 11:53 35 318 Progress.bmp 2000-07-05 13:40 60 118 Swe.bmp 2000-07-05 12:09 84 118 Wrongcd2.bmp 2000-07-05 12:09 84 118 Wrongcd3.bmp 12 File(s) 626 416 bytes Directory of S:\3LNGINSF\POSTINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 09:15 33 POSTINST.BAT 1 File(s) 33 bytes Directory of S:\3LNGINSF\TOOLS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-07-06 14:49 3 593 3LNGINST.BAT 1998-11-24 08:02 15 252 ATTRIB.EXE 1995-10-27 18:29 28 164 BMPVIEW.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 1998-05-06 20:01 5 239 CHOICE.COM 1996-01-31 19:55 18 CLK.COM 1998-11-24 08:02 19 083 DELTREE.EXE 1998-05-06 20:01 125 495 EMM386.EXE 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-06 20:01 49 575 FORMAT.COM 1994-04-02 06:20 22 HARDBOOT.COM 1998-05-06 20:01 33 191 HIMEM.SYS 1998-05-06 20:01 25 473 MSCDEX.EXE 1998-05-06 20:01 12 663 RAMDRIVE.SYS 1998-05-06 20:01 45 379 SMARTDRV.EXE 1997-05-07 14:19 1 SYS.TXT 1995-09-27 14:25 6 813 VOLCHECK.EXE 1998-05-06 20:01 3 878 XCOPY.EXE 1998-05-06 20:01 41 472 XCOPY32.MOD 1997-06-25 13:49 6 YENT 20 File(s) 490 603 bytes Directory of S:\3LNGINSF\WIN98SYS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1998-12-04 20:00 222 390 IO.SYS 1998-05-06 20:01 18 967 SYS.COM 1998-05-06 20:01 93 880 command.com 3 File(s) 335 237 bytes Directory of S:\3LNGINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1999-05-31 09:51 1 576 AUTOEXEC.BAT 2000-08-22 14:14 <DIR> BMP 2000-08-22 14:14 <DIR> Bmpfin 2000-08-22 14:14 <DIR> Bmpnor 2000-08-22 14:14 <DIR> Bmpswe 2000-05-19 15:30 265 CONFIG.SYS 2000-08-22 14:14 <DIR> POSTINST 2000-08-22 14:14 <DIR> TOOLS 2000-08-22 14:14 <DIR> WIN98SYS 2 File(s) 1 841 bytes Directory of S:\3LNGINST\BMP 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1999-01-04 02:38 718 3.BMP 2000-07-05 11:22 60 118 Cdchg2.bmp 2000-07-05 11:22 60 118 Cdchg3.bmp 2000-07-05 13:37 60 118 Fin.bmp 2000-07-06 14:18 120 118 Menu.bmp 2000-07-05 13:34 60 118 Nor.bmp 2000-07-05 11:53 35 318 Progress.bmp 2000-07-06 14:08 40 518 Reboot3.bmp 2000-07-05 13:40 60 118 Swe.bmp 2000-07-05 12:09 84 118 Wrongcd2.bmp 2000-07-05 12:09 84 118 Wrongcd3.bmp 2000-07-05 13:52 48 118 langselc.bmp 2000-07-05 11:47 57 318 no_tosp3.bmp 15 File(s) 772 370 bytes Directory of S:\3LNGINST\Bmpfin 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 2000-03-08 15:02 78 486 Hddmenu.bmp 2000-03-08 15:31 25 318 No_tospc.bmp 2000-03-08 15:37 36 518 PARTFORM.BMP 2000-03-08 15:42 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\Bmpnor 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 1999-05-05 13:26 78 486 Hddmenu.bmp 1998-07-13 11:36 25 318 No_tospc.bmp 1998-07-13 11:41 36 518 PARTFORM.BMP 1998-07-13 11:45 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\Bmpswe 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 1999-05-06 08:14 78 486 Hddmenu.bmp 1998-07-10 16:25 25 318 No_tospc.bmp 1998-07-10 16:29 36 518 PARTFORM.BMP 1998-07-10 17:08 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\POSTINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 09:15 33 POSTINST.BAT 1 File(s) 33 bytes Directory of S:\3LNGINST\TOOLS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 14:52 3 898 3LNGINST.BAT 1995-10-27 18:29 28 164 BMPVIEW.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 1998-05-06 20:01 5 239 CHOICE.COM 1996-01-31 19:55 18 CLK.COM 1998-05-06 20:01 125 495 EMM386.EXE 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-06 20:01 49 575 FORMAT.COM 1994-04-02 06:20 22 HARDBOOT.COM 1998-05-06 20:01 33 191 HIMEM.SYS 1998-05-06 20:01 25 473 MSCDEX.EXE 2000-07-06 14:41 910 PARTINFO.TXT 1998-05-06 20:01 12 663 RAMDRIVE.SYS 1998-05-06 20:01 45 379 SMARTDRV.EXE 1997-05-07 14:19 1 SYS.TXT 1995-09-27 14:25 6 813 VOLCHECK.EXE 1998-05-06 20:01 3 878 XCOPY.EXE 1998-05-06 20:01 41 472 XCOPY32.MOD 1997-06-25 13:49 6 YENT 19 File(s) 457 483 bytes Directory of S:\3LNGINST\WIN98SYS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1998-12-04 20:00 222 390 IO.SYS 1998-05-06 20:01 18 967 SYS.COM 1998-05-06 20:01 93 880 command.com 3 File(s) 335 237 bytes Directory of S:\CRC 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-06-15 12:07 181 422 T310C1NO.ALL 2000-06-15 12:09 215 427 T310C1NO.CRC 2000-06-15 12:07 2 157 T310C1NO.HID 3 File(s) 399 006 bytes Total Files Listed: 104 File(s) 391 625 352 bytes 42 Dir(s) 0 bytes free S:\> Now which line or lines need to be changed? Do I really have to change drive letter Z: to C:? Proposed solutions Solution #1 Ramhound proposed to change the boot order to following; CD-ROM, IDE-0, Floppy This didn't help. In fact, here is the result of it. Searching for Boot Record from CDROM..Not Found Searching for Boot Record from IDE-0.. OK Missing operating system Any other ideas?... Solution #2 Rik proposed to run Z:\setup. Now that I have found a way to drop to DOS prompt with Ctrl+C as described above (Update 2), I did try running setup but there is no such command or file in there. So that didn't work.

  Read the article

• Unclear pricing of Windows Azure

  - by Dirk

  How do you people think about the Windows Azure pricing model and the way it is presented to the user? I just found out that Azure keeps charging hours for STOPPED instances. I just received a bill from more than 100 euro for 3 STOPPED instances (not) running "HelloAzure". I the past I also played around with Amazon Web Services. Amazon doesn't charge for stopped instances. I was wondering: "Should I have known this before, or is Microsoft doing a bad job in clear communication in the pricing model?" Quote from http://www.microsoft.com/windowsazure/pricing/ : Compute time, measured in service hours: Windows Azure compute hours are charged only for when your application is deployed. When developing and testing your application, developers will want to remove the compute instances that are not being used to minimize compute hour billing. Partial compute hours are billed as full hours. I read this, so I stopped all instances after a few hours playing around. Now it seems I should have deleted them, not just "stopped". Strictly speaking, all depends on the definition of the word "deployed". If you upload an application, but it is not running, can it still be regarded as being "deployed"? May be, but when you read this for the first time, with AWS experience in mind, I don't think it's 100% clear what this means. Technically speaking, an uploaded application only uses (read: should only use / needs only) a few MB harddrive space. It doesn't require any CPU time. If Azure wants to reserve CPU's for not running instances.. well, that's Azure's choice, not mine. I don't want to spread a hate campaign at all, but I do want to know how people think about this subject. Should Microsoft be more clear about their pricing model or do you think it's clear enough? Second question: did anyone got refunded for a similar case? Thanks in advance! UPDATE 27-01-2011 I sent an email to customer support a few days ago, but I guess that didn't reach anu human being because I didn't hear anything from it. So, I made a telephone call today with a Dutch customer support representative (I live in Holland). She totally understood the problem and she's trying to get a refund for me. However, she mentioned that "usually these refund requests are denied", but she's going to try. She also mentioned that I'm not the first one with this (or similar) problem. UPDATE 28-01-2011 I just received a phonecall from Microsoft support. The lady told me some good news: the money will refunded. However, the invoice has not been made yet, and my creditcard will first be chardged, after which it will be refunded, but hey, that's no problem for me! I'm glad the way it's solved! Thanks everybody!

  Read the article

• How to change SMP affinity of an IRQ on Ubuntu domU inside Xen XCP?

  - by Alexander Gladysh

  I'd like to change IRQ SMP affinity for reasons, outlined in this question: CPU0 is swamped with eth1 interrupts But I can't — I see Input/output error when I try to write to /proc/irq/*/smp_affinity. Please point me to the HOWTO on the matter. (A formal reference on /proc/irq/*/ would be cool as well.) Gory details: Note that this is a VM inside an Ubuntu-based Xen XCP host. $ uname -a Linux MYHOST 2.6.38-15-virtual #59-Ubuntu SMP Fri Apr 27 16:40:18 UTC 2012 i686 i686 i386 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.04 Release: 11.04 Codename: natty $ sudo cat /proc/irq/*/smp_affinity 01 01 01 01 01 80 80 80 80 80 80 40 40 40 40 40 40 20 20 20 20 20 20 10 10 10 10 10 10 08 08 08 08 08 08 04 04 04 04 04 04 02 02 02 02 02 02 01 01 01 01 01 01 Update. The error details: $ N=$(grep -c processor /proc/cpuinfo) $ echo $N 8 $ printf %x $((2**N-1)) ff $ printf %x $((2**N-1)) | sudo tee /proc/irq/*/smp_affinity fftee: /proc/irq/288/smp_affinity: Input/output error tee: /proc/irq/289/smp_affinity: Input/output error tee: /proc/irq/290/smp_affinity: Input/output error tee: /proc/irq/291/smp_affinity: Input/output error tee: /proc/irq/292/smp_affinity: Input/output error tee: /proc/irq/293/smp_affinity: Input/output error tee: /proc/irq/294/smp_affinity: Input/output error tee: /proc/irq/295/smp_affinity: Input/output error tee: /proc/irq/296/smp_affinity: Input/output error tee: /proc/irq/297/smp_affinity: Input/output error tee: /proc/irq/298/smp_affinity: Input/output error tee: /proc/irq/299/smp_affinity: Input/output error tee: /proc/irq/300/smp_affinity: Input/output error tee: /proc/irq/301/smp_affinity: Input/output error tee: /proc/irq/302/smp_affinity: Input/output error tee: /proc/irq/303/smp_affinity: Input/output error tee: /proc/irq/304/smp_affinity: Input/output error tee: /proc/irq/305/smp_affinity: Input/output error tee: /proc/irq/306/smp_affinity: Input/output error tee: /proc/irq/307/smp_affinity: Input/output error tee: /proc/irq/308/smp_affinity: Input/output error tee: /proc/irq/309/smp_affinity: Input/output error tee: /proc/irq/310/smp_affinity: Input/output error tee: /proc/irq/311/smp_affinity: Input/output error tee: /proc/irq/312/smp_affinity: Input/output error tee: /proc/irq/313/smp_affinity: Input/output error tee: /proc/irq/314/smp_affinity: Input/output error tee: /proc/irq/315/smp_affinity: Input/output error tee: /proc/irq/316/smp_affinity: Input/output error tee: /proc/irq/317/smp_affinity: Input/output error tee: /proc/irq/318/smp_affinity: Input/output error tee: /proc/irq/319/smp_affinity: Input/output error tee: /proc/irq/320/smp_affinity: Input/output error tee: /proc/irq/321/smp_affinity: Input/output error tee: /proc/irq/322/smp_affinity: Input/output error tee: /proc/irq/323/smp_affinity: Input/output error tee: /proc/irq/324/smp_affinity: Input/output error tee: /proc/irq/325/smp_affinity: Input/output error tee: /proc/irq/326/smp_affinity: Input/output error tee: /proc/irq/327/smp_affinity: Input/output error tee: /proc/irq/328/smp_affinity: Input/output error tee: /proc/irq/329/smp_affinity: Input/output error tee: /proc/irq/330/smp_affinity: Input/output error tee: /proc/irq/331/smp_affinity: Input/output error tee: /proc/irq/332/smp_affinity: Input/output error tee: /proc/irq/333/smp_affinity: Input/output error tee: /proc/irq/334/smp_affinity: Input/output error tee: /proc/irq/335/smp_affinity: Input/output error Update. irqbalance is running: $ sudo service irqbalance status irqbalance start/running, process 560

  Read the article

• APC UPS replace battery light and apcupsd reporting "replace battery"

  - by mgjk

  We have an APC Smart UPS 1500. The "Replace Battery" light is on, and apcupsd reports: Emergency! Batteries have failed on UPS xxxx. Change them NOW However, from this article, http://sturgeon.apcc.com/kbasewb2.nsf/for+external/f39c4312fcaf7b948525679a005ebb78?OpenDocument it seems that it's not so clear that the UPS battery needs to be replaced. Stranger, according to the information on the UPS, an 11 minute runtime at 42.9% load running at 27.7V isn't so bad. Any thoughts about what to try next? We're a non-profit, money is an object. It would be a shame to replace a battery with a year or so left in it. # apcaccess status APC : 001,041,1017 DATE : Thu Mar 29 13:01:41 EDT 2012 HOSTNAME : oreilly2 VERSION : 3.14.6 (16 May 2009) debian UPSNAME : xxxx CABLE : Custom Cable Smart MODEL : Smart-UPS 1500 UPSMODE : Stand Alone STARTTIME: Thu Mar 29 12:57:30 EDT 2012 STATUS : ONLINE LINEV : 112.3 Volts LOADPCT : 42.9 Percent Load Capacity BCHARGE : 100.0 Percent TIMELEFT : 11.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds OUTPUTV : 112.3 Volts SENSE : High DWAKE : -01 Seconds DSHUTD : 090 Seconds LOTRANS : 106.0 Volts HITRANS : 127.0 Volts RETPCT : 000.0 Percent ITEMP : 23.8 C Internal ALARMDEL : Always BATTV : 27.7 Volts LINEFREQ : 60.0 Hz LASTXFER : No transfers since turnon NUMXFERS : 0 TONBATT : 0 seconds CUMONBATT: 0 seconds XOFFBATT : N/A SELFTEST : NO STATFLAG : 0x07000008 Status Flag SERIALNO : AS0603298896 BATTDATE : 2006-01-14 NOMOUTV : 120 Volts NOMBATTV : 24.0 Volts FIRMWARE : 601.3.D USB FW:1.5 APCMODEL : Smart-UPS 1500 END APC : Thu Mar 29 13:02:12 EDT 2012 Error when running upstest You are using a SMART cable type, so I'm entering SMART test mode mode.type = USB_UPS Setting up the port ... Hello, this is the apcupsd Cable Test program. This part of apctest is for testing Smart UPSes. Please select the function you want to perform. 1) Query the UPS for all known values 2) Perform a Battery Runtime Calibration 3) Abort Battery Calibration 4) Monitor Battery Calibration progress 5) Program EEPROM 6) Enter TTY mode communicating with UPS 7) Quit Select function number: 2 First ensure that we have a good link and that the UPS is functionning normally. Simulating UPSlinkCheck ... YWrote: Y Got: getline failed. Apparently the link is not up. Giving up.

  Read the article

• Internet Explorer 10 (Metro App) on Windows 8 Pro (RTM) crash

  - by ferpaz

  Internet Explorer 10 (Metro App) on Windows 8 Pro (RTM) does not start and crash with this error: Log Name: Application Source: Application Error Date: 27/08/2012 19:21:29 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: DELL-OPE3.red.aseinfo.com.sv Description: Faulting application name: iexplore.exe, version: 10.0.9200.16384, time stamp: 0x50107ebe Faulting module name: iertutil.dll, version: 10.0.9200.16384, time stamp: 0x50109c90 Exception code: 0xc0000005 Fault offset: 0x0000000000172f0b Faulting process id: 0xadc Faulting application start time: 0x01cd84bb737cfa16 Faulting application path: C:\Program Files\Internet Explorer\iexplore.exe Faulting module path: C:\WINDOWS\system32\iertutil.dll Report Id: b1597df3-f0ae-11e1-be78-88532e15da73 Faulting package full name: Faulting package-relative application ID: Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-08-28T01:21:29.000000000Z" /> <EventRecordID>7612</EventRecordID> <Channel>Application</Channel> <Computer>DELL-OPE3.red.aseinfo.com.sv</Computer> <Security /> </System> <EventData> <Data>iexplore.exe</Data> <Data>10.0.9200.16384</Data> <Data>50107ebe</Data> <Data>iertutil.dll</Data> <Data>10.0.9200.16384</Data> <Data>50109c90</Data> <Data>c0000005</Data> <Data>0000000000172f0b</Data> <Data>adc</Data> <Data>01cd84bb737cfa16</Data> <Data>C:\Program Files\Internet Explorer\iexplore.exe</Data> <Data>C:\WINDOWS\system32\iertutil.dll</Data> <Data>b1597df3-f0ae-11e1-be78-88532e15da73</Data> <Data> </Data> <Data> </Data> </EventData> </Event> Any suggestions?

  Read the article

• Apache2 & .htaccess : Apache ignoring AccessFile

  - by Elyx0

  Hi there here is my server configuration: DEBIAN 32Bits / PHP 5 / Apache Server version: Apache/2.2.3 - Server built: Mar 22 2008 09:29:10 The AccessFiles : grep -ni AccessFileName * apache2.conf:134:AccessFileName .htaccess apache2.conf:667:AccessFileName .httpdoverride All the AllowOverride statements in my apache2/ folder. mods-available/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-available/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit mods-enabled/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-enabled/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit sites-enabled/default:8: AllowOverride All sites-enabled/default:14: AllowOverride All sites-enabled/default:19: AllowOverride All sites-enabled/default:24: AllowOverride All sites-enabled/default:42: AllowOverride All The sites-enabled/default file : 1 <VirtualHost *> 2 ServerAdmin [email protected] 3 ServerName mysite.com 4 ServerAlias mysite.com 5 DocumentRoot /var/www/mysite.com/ 6 <Directory /> 7 Options FollowSymLinks 8 AllowOverride All 9 Order Deny,Allow 10 Deny from all 11 </Directory> 12 <Directory /var/www/mysite.com/> 13 Options Indexes FollowSymLinks MultiViews 14 AllowOverride All 15 Order allow,deny 16 allow from all 17 </Directory> 18 <Directory /var/www/mysite.com/test/> 19 AllowOverride All 20 </Directory> 21 22 ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ 23 <Directory "/usr/lib/cgi-bin"> 24 AllowOverride All 25 Options ExecCGI -MultiViews +SymLinksIfOwnerMatch 26 Order allow,deny 27 Allow from all 28 </Directory> 29 30 ErrorLog /var/log/apache2/error.log 31 32 # Possible values include: debug, info, notice, warn, error, crit, 33 # alert, emerg. 34 LogLevel warn 35 36 CustomLog /var/log/apache2/access.log combined 37 ServerSignature Off 38 39 Alias /doc/ "/usr/share/doc/" 40 <Directory "/usr/share/doc/"> 41 Options Indexes MultiViews FollowSymLinks 42 AllowOverride All 43 Order deny,allow 44 Deny from all 45 Allow from 127.0.0.0/255.0.0.0 ::1/128 46 </Directory> 47 48 49 50 51 52 53 54 </VirtualHost> If i change any Allow from all in Deny from all , it works whenever i put it. I've got one .htaccess at /mysite.com/.htaccess & one at /mysite.com/test/.htaccess with: Order Deny,Allow Deny from all Neither of them work i can still see my website. I've got mod_rewrite enabled but i don't think it does anything here. I've tried almost everything :/ It works on my local environnement (MAMP) but fails when on my Debian server.

  Read the article

• Issues with Server 2012 using DFSR running on Hyper-V 2012

  - by Bryan

  We have a number of Server 2012 systems, all of which run virtualised on Hyper-V 2012 server. We are having problems with two such virtual instances, both of which are used as file servers, whereby they occasionally stop responding to requests to serve files to clients. After logging on to the server, attempts to shut it down gracefully fail (no error, it just fails to acknowledge a shutdown request). Recovery is a case of power cycling the server(s) from the Hyper-V console. These two servers don't server a large number of users (one serves no more than 6 users, and the other serves around 20 users), they are in the same domain, but on different physical hardware (and at different sites). They don't lock up at the same time. They both use DFSR to replicate a fairly large amount of data between themselves (200GB) over ADSL connections, this is working fine, and we have been using DFSR to do this on the previous two generations of server OS we have used (Server 2008 R2 and Server 2003 - both of which were physical installs however). Today, when one of the servers crashed, I noticed an entry in the event log, which looked similar to the following: Log Name: Application Source: ESENT Date: 27/11/2012 10:25:55 Event ID: 533 Task Category: General Level: Warning Keywords: Classic User: N/A Computer: HAL-FS-01.example.com Description: DFSRs (1500) \\.\E:\System Volume Information\DFSR\database_C8CC_101_CC00_EC0E\ dfsr.db: A request to write to the file "\\.\E:\System Volume Information\ DFSR\database_C8CC_101_CC00_EC0E\fsr.log" at offset 4423680 (0x0000000000438000) for 4096 (0x00001000) bytes has not completed for 36 second(s). This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. When the server started up again, I went to find the event log entry to investigate further and found that the event log entry was no longer there (I assume it was in memory but failed to write to disk before the server was powered off, for the reason mentioned in the message). I found the above message by searching back further in the event log. Both of these virtual servers have their E: volumes fully allocated as opposed to dynamically expanding, and there are no other issues on any of the other virtual servers (which include server 2012, server 2008 R2 and Ubuntu 12.04 x64). There are no signs of IO, memory or CPU starvation on the host systems. I've used performance counters on the affected virtual servers to monitor memory usage (including non paged pool usage), as well as CPU and network utilisation, and none of these show any signs of trouble when the issue arises. I would have thought our configuration isn't that uncommon, so I'm wondering if anyone else has seen this, and managed to resolve the problem?

  Read the article

• PulseAudio on Cygwin: Failed to create secure directory: Unknown error 13

  - by Nithin

  I am unable to run PulseAudio on Cygwin. Operating System: Windows 8 Pro 64 bit Cygwin Setup.exe Version: 2.831 (64 bit) PulseAudio Version: 2.1-1 When I run: pulseaudio -vv this is the output: D: [(null)] core-util.c: setpriority() worked. I: [(null)] core-util.c: Successfully gained nice level -11. I: [(null)] main.c: This is PulseAudio 2.1 D: [(null)] main.c: Compilation host: x86_64-unknown-cygwin D: [(null)] main.c: Compilation CFLAGS: -ggdb -O2 -pipe -fdebug-prefix-map=/usr/src/ports/pulseaudio/pulseaudio-2.1-1/build=/usr/src/debug/pulseaudio-2.1-1 -fdebug-prefix-map=/usr/src/ports/pulseaudio/pulseaudio-2.1-1/src/pulseaudio-2.1=/usr/src/debug/pulseaudio-2.1-1 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option D: [(null)] main.c: Running on host: CYGWIN_NT-6.2 x86_64 1.7.25(0.270/5/3) 2013-08-31 20:37 D: [(null)] main.c: Found 4 CPUs. I: [(null)] main.c: Page size is 65536 bytes D: [(null)] main.c: Compiled with Valgrind support: no D: [(null)] main.c: Running in valgrind mode: no D: [(null)] main.c: Running in VM: no D: [(null)] main.c: Optimized build: yes D: [(null)] main.c: FASTPATH defined, only fast path asserts disabled. I: [(null)] main.c: Machine ID is 5d8bd07cb924c67197184e42527f2603. E: [(null)] core-util.c: Failed to create secure directory: Unknown error 13 When I instead run pulseaudio -vv --start the output is this: E: [autospawn] core-util.c: Failed to create secure directory: Unknown error 13 W: [autospawn] lock-autospawn.c: Cannot access autospawn lock. E: [(null)] main.c: Failed to acquire autospawn lock When I ran strace pulseaudio -vv, the red-colored lines in the output were: 28 1637050 [main] pulseaudio 5104 fhandler_pty_slave::write: (669): pty output_mutex(0xBC) released 26 1637076 [main] pulseaudio 5104 write: 7 = write(2, 0x3FE171079, 7) 42 1637118 [main] pulseaudio 5104 fhandler_pty_slave::write: pty0, write(0x60003BB40, 51) 27 1637145 [main] pulseaudio 5104 fhandler_pty_slave::write: (654): pty output_mutex (0xBC): waiting -1 ms 23 1637168 [main] pulseaudio 5104 fhandler_pty_slave::write: (654): pty output_mutex: acquired Failed to create secure directory: Unknown error 13 21 1637189 [main] pulseaudio 5104 fhandler_pty_slave::write: (669): pty output_mutex(0xBC) released 29 1637218 [main] pulseaudio 5104 write: 51 = write(2, 0x60003BB40, 51) 46 1637264 [main] pulseaudio 5104 fhandler_pty_slave::write: pty0, write(0x3FE17106F, 4) 24 1637288 [main] pulseaudio 5104 fhandler_pty_slave::write: (654): pty output_mutex (0xBC): waiting -1 ms 24 1637312 [main] pulseaudio 5104 fhandler_pty_slave::write: (654): pty output_mutex: acquired Please can someone help me?

  Read the article

• High Server Load cannot figure out why

  - by Tim Bolton

  My server is currently running CentOS 5.2, with WHM 11.34. Currently, we're at 6.43 to 12 for a load average. The sites that we're hosting are taking a lot time to respond and resolve. top doesn't show anything out of the ordinary and iftop doesn't show a lot of traffic. We have many resellers, and some not so good at writing code, how can we find the culprit? vmstat output: vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 84 78684 154916 1021080 0 0 72 274 0 14 6 3 80 12 0 top output (ordered by %CPU) top - 21:44:43 up 5 days, 10:39, 3 users, load average: 3.36, 4.18, 4.73 Tasks: 222 total, 3 running, 219 sleeping, 0 stopped, 0 zombie Cpu(s): 5.8%us, 2.3%sy, 0.2%ni, 79.6%id, 11.8%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 2074580k total, 1863044k used, 211536k free, 174828k buffers Swap: 2040212k total, 84k used, 2040128k free, 987604k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:45.87 mysqld 21772 igniteth 17 0 23200 7152 3932 R 4 0.3 0:00.02 php 1586 root 10 -5 0 0 0 S 2 0.0 11:45.19 kjournald 21759 root 15 0 2416 1024 732 R 2 0.0 0:00.01 top 1 root 15 0 2156 648 560 S 0 0.0 0:26.31 init 2 root RT 0 0 0 0 S 0 0.0 0:00.35 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.32 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:02.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.11 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:01.29 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:00.26 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2 11 root RT 0 0 0 0 S 0 0.0 0:00.90 migration/3 12 root 34 19 0 0 0 R 0 0.0 0:00.20 ksoftirqd/3 13 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/3 top output (ordered by CPU time) top - 21:46:12 up 5 days, 10:41, 3 users, load average: 2.88, 3.82, 4.55 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie Cpu(s): 3.7%us, 2.0%sy, 2.0%ni, 67.2%id, 25.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2074580k total, 1959516k used, 115064k free, 183116k buffers Swap: 2040212k total, 84k used, 2040128k free, 1090308k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 32367 root 16 0 215m 212m 1548 S 0 10.5 62:03.63 62:03 tailwatchd 1586 root 10 -5 0 0 0 S 0 0.0 11:45.27 11:45 kjournald 1576 root 10 -5 0 0 0 S 0 0.0 2:37.86 2:37 kjournald 27722 root 16 0 2556 1184 800 S 0 0.1 1:48.94 1:48 top 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:48.63 1:48 mysqld 2932 root 34 19 0 0 0 S 0 0.0 1:41.05 1:41 kipmi0 226 root 10 -5 0 0 0 S 0 0.0 1:34.33 1:34 kswapd0 2671 named 25 0 74688 7400 2116 S 0 0.4 1:23.58 1:23 named 3229 root 15 0 10300 3348 2724 S 0 0.2 0:40.85 0:40 sshd 1580 root 10 -5 0 0 0 S 0 0.0 0:30.62 0:30 kjournald 1 root 17 0 2156 648 560 S 0 0.0 0:26.32 0:26 init 2616 root 15 0 1816 576 480 S 0 0.0 0:23.50 0:23 syslogd 1584 root 10 -5 0 0 0 S 0 0.0 0:18.67 0:18 kjournald 4342 root 34 19 27692 11m 2116 S 0 0.5 0:18.23 0:18 yum-updatesd 8044 bollingp 15 0 3456 2036 740 S 1 0.1 0:15.56 0:15 imapd 26 root 10 -5 0 0 0 S 0 0.0 0:14.18 0:14 kblockd/1 7989 gmailsit 16 0 3196 1748 736 S 0 0.1 0:10.43 0:10 imapd iostat -xtk 1 10 output [root@server1 tmp]# iostat -xtk 1 10 Linux 2.6.18-53.el5 12/18/2012 Time: 09:51:06 PM avg-cpu: %user %nice %system %iowait %steal %idle 5.83 0.19 2.53 11.85 0.00 79.60 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.37 118.83 18.70 54.27 131.47 692.72 22.59 4.90 67.19 3.10 22.59 sdb 0.35 39.33 20.33 61.43 158.79 403.22 13.75 5.23 63.93 3.77 30.80 Time: 09:51:07 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.50 0.00 0.50 24.00 0.00 74.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 25.00 2.00 2.00 128.00 108.00 118.00 0.03 7.25 4.00 1.60 sdb 0.00 16.00 41.00 145.00 200.00 668.00 9.33 107.92 272.72 5.38 100.10 Time: 09:51:08 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.00 0.00 1.50 29.50 0.00 67.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 95.00 3.00 33.00 12.00 480.00 27.33 0.07 1.72 1.31 4.70 sdb 0.00 14.00 1.00 228.00 4.00 960.00 8.42 143.49 568.01 4.37 100.10 Time: 09:51:09 PM avg-cpu: %user %nice %system %iowait %steal %idle 13.28 0.00 2.76 21.30 0.00 62.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 21.00 1.00 19.00 16.00 192.00 20.80 0.06 3.55 1.30 2.60 sdb 0.00 36.00 28.00 181.00 124.00 884.00 9.65 121.16 617.31 4.79 100.10 Time: 09:51:10 PM avg-cpu: %user %nice %system %iowait %steal %idle 4.74 0.00 1.50 25.19 0.00 68.58 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 20.00 3.00 15.00 12.00 136.00 16.44 0.17 7.11 3.11 5.60 sdb 0.00 0.00 103.00 60.00 544.00 248.00 9.72 52.35 545.23 6.14 100.10 Time: 09:51:11 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.24 0.00 1.24 25.31 0.00 72.21 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 75.00 4.00 28.00 16.00 416.00 27.00 0.08 3.72 2.03 6.50 sdb 2.00 9.00 124.00 17.00 616.00 104.00 10.21 3.73 213.73 7.10 100.10 Time: 09:51:12 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.00 0.00 0.75 24.31 0.00 73.93 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 24.00 1.00 9.00 4.00 132.00 27.20 0.01 1.20 1.10 1.10 sdb 4.00 40.00 103.00 48.00 528.00 212.00 9.80 105.21 104.32 6.64 100.20 Time: 09:51:13 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.50 0.00 1.75 23.25 0.00 72.50 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 125.74 3.96 46.53 15.84 689.11 27.92 0.20 4.06 2.41 12.18 sdb 2.97 0.00 91.09 84.16 419.80 471.29 10.17 85.85 590.78 5.66 99.11 Time: 09:51:14 PM avg-cpu: %user %nice %system %iowait %steal %idle 0.75 0.00 0.50 24.94 0.00 73.82 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 88.00 1.00 7.00 4.00 380.00 96.00 0.04 4.38 3.00 2.40 sdb 3.00 7.00 111.00 44.00 540.00 208.00 9.65 18.58 581.79 6.46 100.10 Time: 09:51:15 PM avg-cpu: %user %nice %system %iowait %steal %idle 11.03 0.00 3.26 26.57 0.00 59.15 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 145.00 7.00 53.00 28.00 792.00 27.33 0.15 2.50 1.55 9.30 sdb 1.00 0.00 155.00 0.00 800.00 0.00 10.32 2.85 18.63 6.46 100.10 [root@server1 tmp]# MySQL Show Full Processlist mysql> show full processlist; +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | 1 | DB_USER_ONE | localhost | DB_ONE | Query | 3 | waiting for handler insert | INSERT DELAYED INTO defers (mailtime,msgid,email,transport_method,message,host,ip,router,deliveryuser,deliverydomain) VALUES(FROM_UNIXTIME('1355879748'),'1TivwL-0003y8-8l','[email protected]','remote_smtp','SMTP error from remote mail server after initial connection: host mx1.mail.tw.yahoo.com [203.188.197.119]: 421 4.7.0 [TS01] Messages from 75.125.90.146 temporarily deferred due to user complaints - 4.16.55.1; see http://postmaster.yahoo.com/421-ts01.html','mx1.mail.tw.yahoo.com','203.188.197.119','lookuphost','','') | | 2 | DELAYED | localhost | DB_ONE | Delayed insert | 52 | insert | | | 3 | DELAYED | localhost | DB_ONE | Delayed insert | 68 | insert | | | 911 | DELAYED | localhost | DB_ONE | Delayed insert | 99 | Waiting for INSERT | | | 993 | DB_USER_TWO | localhost | DB_TWO | Sleep | 832 | | NULL | | 994 | DB_USER_ONE | localhost | DB_ONE | Query | 185 | Locked | delete from failures where FROM_UNIXTIME(UNIX_TIMESTAMP(NOW())-1296000) > mailtime | | 1102 | DB_USER_THREE | localhost | DB_THREE | Query | 29 | NULL | commit | | 1249 | DB_USER_FOUR | localhost | DB_FOUR | Query | 13 | NULL | commit | | 1263 | root | localhost | DB_FIVE | Query | 0 | NULL | show full processlist | | 1264 | DB_USER_SIX | localhost | DB_SIX | Query | 3 | NULL | commit | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 10 rows in set (0.00 sec)

  Read the article

• Modifying IP Whois results?

  - by Rob

  Okay, I recently bought a dedicated server from santrex.net If you go here: http://domaintoip.com/ip.php?domain=188.72.215.27 It displays the whois information for that IP, santrex.net I want to modify my whois information, so that it displays my information instead, and doesn't link to santrex or santrex's ISP at all. Is this possible? If so, how would I go about doing it?

  Read the article

• Some DHCP clients end up with wrong DNS server

  - by Nic Waller

  The scenario: DC running Windows Server 2008 R2 providing DNS + DHCP Cisco 1811 Router as the gateway 30 Windows XP DHCP clients on the LAN The problem: Some workstations are spontaneously switching to an incorrect DNS server. Specifically, ipconfig /all shows that they start using the gateway as a DNS server. This happens about 5-10 times a day to various computers, sometimes more than once per day. The workaround: Repairing the connection on the XP client always fixes the problem, and the correct DNS server address is obtained. We lost our main DNS/DHCP machine a week ago, and had to bring this one online as a spare. We've been having this issue since then. DHCP leases on the old and new servers are configured for "wired" (8 day) duration. There are definitely no other DHCP servers active on the LAN. So far there is no discernible pattern about which clients will show this problem, or when. When I ran DCDIAG /test:DNS it came back clean. Manual inspection of the DNS zone shows that all the records are appearing as expected, with no traces of the previous machine in there. Update Feb 27: Added screenshots. Here is a screenshot of the DHCP scope options on the 2008 R2 server. And here is a screenshot of ipconfig /all running on a healthy host. I don't have any ailing hosts at the moment, but will grab a screencap next time it happens. Update Feb 28: More screenshots. Here's a screenshot of DHCP and DNS traffic from a healthy client when repairing the local area connection. There's definitely only one server responding, but it does seem strange that the negotiation takes place twice. I'll try to get a similar capture from a sick machine this coming week. Update Mar 01: Caught a bad ipconfig. Here's a screenshot of ipconfig /all from a client that had this issue. It says the lease was issued this morning, but it doesn't even have an entry for the secondary DNS I set up yesterday. Both DNS servers were discovered properly when repairing the connection. Update Mar 01: It even got the sysadmin! This issue finally affected my personal workstation this morning. Unfortunately I had just rebooted and wasn't running a packet dump at the time. I set up a secondary server yesterday, and was logging all DNS traffic to it. My machine had not contacted the secondary DNS in over half an hour, so that says to me that it's just spontaneously reverting to the gateway without even failing over to secondary DNS first. Today I swapped the order of the DNS servers in DHCP, so the secondary is primary and vice versa. I will update again once I know how that goes.

  Read the article

• Configuration issue with HttpRealipModule (CloudFlare) in nginx configuration file

  - by Tyrx

  I've been attempting to use HttpRealipModule with the CloudFlare IP range in my main nginx configuration file but upon restarting nginx I'll just get a standard `"configuration file /etc/nginx/nginx.conf test failed" and my site will go down. This is what I've been attempting to do with my nginx.conf; user www-data; worker_processes 1; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { # Basic Settings set_real_ip_from 204.93.240.0/24; set_real_ip_from 204.93.177.0/24; set_real_ip_from 199.27.128.0/21; set_real_ip_from 173.245.48.0/20; set_real_ip_from 103.22.200.0/22; set_real_ip_from 141.101.64.0/18; set_real_ip_from 108.162.192.0/18; set_real_ip_from 190.93.240.0/20; set_real_ip_from 188.114.96.0/20; set_real_ip_from 2400:cb00::/32; set_real_ip_from 2606:4700::/32; set_real_ip_from 2803:f800::/32; real_ip_header CF-Connecting-IP; client_max_body_size 50m; client_header_timeout 5; keepalive_timeout 5; port_in_redirect off; sendfile on; server_tokens off; server_name_in_redirect off; tcp_nopush on; tcp_nodelay on; types_hash_max_size 2048; # MIME include /etc/nginx/mime.types; default_type application/octet-stream; # Logging Settings access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log warn; # Gzip Settings gzip on; gzip_disable "msie6"; gzip_min_length 1400; gzip_types text/plain text/css text/javascript text/xml application/x-javascript application/xml application/xml+rss; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } What's wrong with that configuration file?

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• Access denied to mysql cause by invalid server hostname bind address

  - by Mark

  I cannot login to mysql using the terminal. [root@fst mysql]# mysql -h localhost -u admin -p Enter password: ERROR 1045 (28000): Access denied for user 'admin'@'localhost' (using password: YES) I am sure I have the correct password. The mysql is also running when I check status. The mysql database is also present in the directory /var/lib/mysql/. The host host.myi, host.myd and host.frm are present. By the way this a related to question on my previous problem MySQL server quit without updating PID file . Initially the problem arise when the root directory was full. To be able to login to directadmin and start mysql, I added a soft link of the /var/lib/mysql/ to /home/mysql. Since my database used up the most of the root directory. The root directory has 50Gb and /home has 1.5Gb. Somehow the /var/lib/mysql/idbdata1 is corrupted. So I move it to another location. Now, I can start the mysql server but I cannot login into it. Below are the contents from the myql logs. 121212 20:44:10 mysqld_safe mysqld from pid file /var/lib/mysql/fst.srv.net.pid ended 121212 20:44:10 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121212 20:44:10 [Note] Plugin 'FEDERATED' is disabled. 121212 20:44:10 InnoDB: The InnoDB memory heap is disabled 121212 20:44:10 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121212 20:44:10 InnoDB: Compressed tables use zlib 1.2.3 121212 20:44:10 InnoDB: Using Linux native AIO 121212 20:44:10 InnoDB: Initializing buffer pool, size = 128.0M 121212 20:44:10 InnoDB: Completed initialization of buffer pool 121212 20:44:10 InnoDB: highest supported file format is Barracuda. 121212 20:44:11 InnoDB: Waiting for the background threads to start 121212 20:44:12 InnoDB: 1.1.8 started; log sequence number 1595675 121212 20:44:12 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121212 20:44:12 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121212 20:44:12 [Note] Server socket created on IP: '0.0.0.0'. 121212 20:44:12 [Note] Event Scheduler: Loaded 0 events 121212 20:44:12 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.27-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 MySQL Community Server (GPL) I guess there is something wrong with the bind address. How should I fix the problem?

  Read the article

• How to disable hiddev96 in linux (or tell it to ignore a specific device)

  - by Miky D

  I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

  Read the article

• Server load spikes several times a day, load average for the past month is 5 times the load average all year

  - by AMF

  My Munin notifications set up for our (Debian) LAMP cluster have been notifying me continuously that our load on our production machine has been at dangerous levels. While the average load all year typically runs between 2 and 8, the load in the past month and only the past month -- has been skyrocketing to 10, 18, and occasionally even 50-60. The spikes last only 5-10 minutes at a time and occur about every 2-3 hours. The spikes do not effect performance only because I have a script that sends traffic off our server to a mirror CDN when the load goes above 10. I've looked for cron jobs that correlate with this timeframe but there is nothing I can see that would cause this. Site traffic is also normal (we receive about 200K visits per day). I'm also trying to think of anything I've changed around the time this problem began, and I really cannot think of anything. This is probably not much to go on. Maybe there is a clue in the top print-out (below) that I'm not seeing. How do I proceed to find the cause? -- Typical top when the load is NOT spiking: top - 11:13:09 up 472 days, 25 min, 1 user, load average: 6.08, 4.29, 3.80 Tasks: 105 total, 1 running, 104 sleeping, 0 stopped, 0 zombie Cpu(s): 41.2%us, 5.8%sy, 0.0%ni, 49.5%id, 2.7%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 3369592k total, 2166980k used, 1202612k free, 559504k buffers Swap: 2650684k total, 1892k used, 2648792k free, 1129116k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32046 apache 15 0 36300 12m 9828 S 20 0.4 0:01.97 apache2 32679 apache 15 0 36568 13m 10m S 19 0.4 0:01.69 apache2 31441 apache 15 0 36616 13m 10m S 19 0.4 0:04.13 apache2 31477 apache 15 0 36596 13m 9.8m S 15 0.4 0:01.99 apache2 31993 apache 15 0 36876 16m 12m S 12 0.5 0:02.01 apache2 31782 apache 15 0 36836 14m 10m S 8 0.4 0:02.17 apache2 32198 apache 15 0 36536 13m 10m S 7 0.4 0:01.59 apache2 880 apache 15 0 36508 9708 6236 S 7 0.3 0:00.42 apache2 31945 apache 17 0 36876 16m 13m S 5 0.5 0:03.17 apache2 32197 apache 16 0 36636 10m 7504 S 5 0.3 0:02.70 apache2 32326 apache 15 0 37024 11m 7632 S 5 0.3 0:02.15 apache2 32565 apache 15 0 37280 13m 9.8m S 5 0.4 0:03.75 apache2 32676 apache 15 0 36896 16m 12m S 4 0.5 0:00.95 apache2 32678 apache 15 0 36536 12m 9692 S 4 0.4 0:02.27 apache2 974 apache 16 0 37064 9888 6016 D 4 0.3 0:00.13 apache2 32150 apache 16 0 36832 13m 10m S 3 0.4 0:01.74 apache2 31780 apache 16 0 36848 11m 7660 S 3 0.3 0:02.87 apache2

  Read the article

• Cannot access a very specific site from my router

  - by DJDarkViper

  This is a problem for me because this site is important to me. It's MY website. And sadly my email is hosted on my site (which I cant access either) When I try to access my website when connected to my Linksys E3000 router, these days it simply just doesn't go through. When I ping it, its all Request Timed Out, and when I tracert C:\Users\Kyle>tracert blackjaguarstudios.com Tracing route to blackjaguarstudios.com [199.188.204.228] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms CISCO26565 [192.168.1.1] 2 16 ms 15 ms 11 ms 11.4.64.1 3 11 ms 9 ms 11 ms rd1cs-ge1-2-1.ok.shawcable.net [64.59.169.2] 4 20 ms 21 ms 22 ms 66.163.76.98 5 37 ms 36 ms 35 ms rc1nr-tge0-9-2-0.wp.shawcable.net [66.163.77.54] 6 112 ms 84 ms 85 ms rc2ch-pos9-0.il.shawcable.net [66.163.76.174] 7 86 ms 89 ms 90 ms rc4as-ge12-0-0.vx.shawcable.net [66.163.64.46] 8 90 ms 84 ms 85 ms eqix.xe-3-3-0.cr2.iad1.us.nlayer.net [206.223.115.61] 9 97 ms 97 ms 99 ms xe-3-3-0.cr1.atl1.us.nlayer.net [69.22.142.105] 10 128 ms 128 ms 126 ms ae1-40g.ar1.atl1.us.nlayer.net [69.31.135.130] 11 101 ms 97 ms 96 ms as16626.xe-2-0-5-102.ar1.atl1.us.nlayer.net [69.31.135.46] 12 100 ms 97 ms 197 ms 6509-sc1.abstractdns.com [207.210.114.166] 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete. C:\Users\Kyle> SHAW Cable being my ISP. Figuring this was all something to do with some setting I made on the router, I reset the thing back to factory defaults. Nope. So I'm at a bit of a loss what to do here, as NO device (Computers, Laptops, Tablets, Phones, PS3/ 360, etc) can access my site or its features, so it's not just my computer either. But every other site is just fine. When I connect to my neighbors router, the site comes up just fine. And shes with SHAW as well. What should I do?!

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• Connecting a 2560x1440 display to a laptop?

  - by tjollans

  Having read Jeff Atwood's blog post on Korean 27" IPS LCDs, I've been wondering to what extent these are useful in a notebook + large display situation. I own a Lenovo Thinkpad Edge E320 with 2nd gen. integrated Intel graphics. According to the spec from Intel, this should support HDMI version 1.4, and, using DisplayPort, resolutions up to 2560x1600. HDMI version 1.4 supports resolutions up to 4096×2160, however, according to c't (German), the HDMI interface used with Intel chips only supports 1920x1200. The same goes for the DVI output - dual-link DVI-D, apparently, is not supported by Intel. It would appear that my laptop cannot digitally drive this kind of resolution. Now what about other laptops? According to the article in c't above, AMD's integrated graphics chips have the same limitation as Intel's. NVIDIA graphics cards, apparently, only offer resolutions up to 1900x1200 over HDMI out of the box, but it's possible, when using Linux at least, to trick the driver into enabling higher resolutions. Is this still true? What's the situation on Windows and OSX? I found no information on whether discrete AMD chips support ultra-high resolutions over HDMI. Owners of laptops with (Mini) DisplayPort / Thunderbolt won't have any issues with displays this large, but if you're planning to go for a display with dual-link DVI-D input only (like the Korean ones), you're going to need an adapter, which will set you back something like €70-€100 (since the protocols are incompatible). The big question mark in this equation is VGA: a lot of laptops have it, and I don't see any reason to think this resolution is not supported by the hardware (an oft-quoted figure appears to be 2048x1536@75Hz, so 2560x1440@60Hz should be possible, right?), but are the drivers likely to cause problems? Perhaps more critically, you'd need a VGA to dual-link DVI-D adapter that converts analog to digital signals. Do these exist? How good are they? How expensive are they? Is there a performance penalty involved? Please correct me if I'm wrong on any points. In summary, what are the requirements on a laptop to drive an external LCD at 2560x1440, in particular one that supports dual-link DVI-D only, and what tools and adapters can be used to lower the bar?

  Read the article

• Root directory permissions on Mac OS X 10.6?

  - by Agos

  Hi, I was wondering if it's normal that the root directory / should be owned by “root”. I get asked for my password every time I want to do something there (e.g. save a file, create a directory) and I don't remember this happening before (though this may just be my faulty memory). Here's the relevant terminal output: MacBook:~ ago$ ls -lah / total 37311 drwxr-xr-x@ 35 root staff 1,2K 22 Mar 12:34 . drwxr-xr-x@ 35 root staff 1,2K 22 Mar 12:34 .. -rw-rw-r--@ 1 root admin 21K 22 Mar 10:21 .DS_Store drwx------ 3 root admin 102B 28 Feb 2008 .Spotlight-V100 d-wx-wx-wt 2 root admin 68B 31 Ago 2009 .Trashes -rw-r--r--@ 1 ago 501 45K 23 Gen 2008 .VolumeIcon.icns srwxrwxrwx 1 root staff 0B 22 Mar 12:34 .dbfseventsd ---------- 1 root admin 0B 23 Giu 2009 .file drwx------ 27 root admin 918B 22 Mar 10:55 .fseventsd -rw-r--r--@ 1 ago admin 59B 30 Ott 2007 .hidden -rw------- 1 root wheel 320K 30 Nov 11:42 .hotfiles.btree drwxr-xr-x@ 2 root wheel 68B 18 Mag 2009 .vol drwxrwxr-x+ 276 root admin 9,2K 19 Mar 18:28 Applications drwxrwxr-x@ 21 root admin 714B 14 Nov 12:01 Developer drwxrwxr-t+ 74 root admin 2,5K 18 Dic 22:14 Library drwxr-xr-x@ 2 root wheel 68B 23 Giu 2009 Network drwxr-xr-x 4 root wheel 136B 13 Nov 17:49 System drwxr-xr-x 6 root admin 204B 31 Ago 2009 Users drwxrwxrwt@ 4 root admin 136B 22 Mar 12:35 Volumes drwxr-xr-x@ 39 root wheel 1,3K 13 Nov 17:44 bin drwxrwxr-t@ 2 root admin 68B 23 Giu 2009 cores dr-xr-xr-x 3 root wheel 5,1K 17 Mar 11:29 dev lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 etc -> private/etc dr-xr-xr-x 2 root wheel 1B 17 Mar 11:30 home drwxrwxrwt@ 3 root wheel 102B 31 Ago 2009 lost+found -rw-r--r--@ 1 root wheel 18M 3 Nov 19:40 mach_kernel dr-xr-xr-x 2 root wheel 1B 17 Mar 11:30 net drwxr-xr-x@ 3 root admin 102B 24 Nov 2007 opt drwxr-xr-x@ 6 root wheel 204B 31 Ago 2009 private drwxr-xr-x@ 64 root wheel 2,1K 13 Nov 17:44 sbin lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 tmp -> private/tmp drwxr-xr-x@ 17 root wheel 578B 12 Set 2009 usr lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 var -> private/var Are these ownerships / permissions ok? Should I chmod/chown something? Thanks in advance

  Read the article

• How to move a ruby on rails application to a new server

  - by ManiacZX

  I have a rails app on an old Ubuntu server I need to move onto a new machine. I haven't worked with ruby on rails so I don't really know anything about the structure of the app. I want to load this onto an Ubuntu 8.04 AMI on Amazon EC2 and am looking for any information regarding the migration process such as: Do I copy over the entire folder defined as the application root in the mongrel config (for ex: /u/apps/myapp/current) or just certain folders? Am I looking for trouble if I go with the latest versions of ruby and the various gems? Any general gotchas to look out for in the process. Current server information: root@webnode001:/# cat /proc/version Linux version 2.6.15-27-server (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Dec 8 18:43:54 UTC 2006 root@webnode001:/# rails -v Rails 1.2.3 root@webnode001:/# mongrel_rails cluster::configure --version Version 1.0.1 root@webnode001:/# gem -v 0.9.0 root@webnode001:/# gem list -l *** LOCAL GEMS *** actionmailer (1.3.3, 1.2.5) Service layer for easy email delivery and testing. actionpack (1.13.3, 1.12.5) Web-flow and rendering framework putting the VC in MVC. actionwebservice (1.2.3, 1.1.6) Web service support for Action Pack. activerecord (1.15.3, 1.15.2, 1.14.4) Implements the ActiveRecord pattern for ORM. activesupport (1.4.2, 1.4.1, 1.3.1) Support and utility classes used by the Rails framework. cgi_multipart_eof_fix (2.1) Fix an exploitable bug in CGI multipart parsing which affects Ruby <= 1.8.5 when multipart boundary attribute contains a non-halting regular expression string. daemons (1.0.7, 1.0.5, 1.0.4, 1.0.2) A toolkit to create and control daemons in different ways eventmachine (0.7.2, 0.7.0) Ruby/EventMachine socket engine library fastercsv (1.2.0, 1.1.0) FasterCSV is CSV, but faster, smaller, and cleaner. fastthread (1.0) Optimized replacement for thread.rb primitives ferret (0.11.4) Ruby indexing library. gem_plugin (0.2.2, 0.2.1) A plugin system based only on rubygems that uses dependencies only mongrel (1.0.1, 0.3.13.4) A small fast HTTP library and server that runs Rails, Camping, Nitro and Iowa apps. mongrel_cluster (0.2.1) Mongrel plugin that provides commands and Capistrano tasks for managing multiple Mongrel processes. mysql (2.7) MySQL/Ruby provides the same functions for Ruby programs that the MySQL C API provides for C programs. piston (1.3.3) Piston is a utility that enables merge tracking of remote repositories. rails (1.2.3, 1.1.6) Web-application framework with template engine, control-flow layer, and ORM. rake (0.7.3, 0.7.1) Ruby based make-like utility. sources (0.0.1) This package provides download sources for remote gem installation swiftiply (0.5.1) A fast clustering proxy for web applications.

  Read the article

• Customizing Fantacy Remote .INI file

  - by karthik

  I am using Fantacy Remote to remote view other machines. I have attached the default .INI file that Fantacy Remote uses. When i connect to a machine, the client user should not have mouse and keyboard access of the Remote machine. It should be a View only remote connection. And i want to make the Remote viewer screen to be in full screen mode, because i dont want the user to do anything with menubars of Fatancy remote. Because this is kiosk application. What should i change in configuration file [.ini] inorder to achieve the above ? Anyone who have used this software before, kindly help.. [APP] iVersion= 101 pcVersion=1.01a pcBuildDate=Mar 27 2009 [MAIN] iFirstSetup= 0 rcMain.rcLeft= 676 rcMain.rcTop= 378 rcMain.rcRight= 1004 rcMain.rcBottom= 672 iShowLog= 0 iMode= 1 [GENERAL] iTips= 1 iTrayAnimation= 1 iCheckColor= 1 iPriority= 1 iSsememcpy= 1 iAutoOpenRecv= 1 pcRecvPath=C:\Documents and Settings\karthikeyan\My Documents\Downloads\fremote101a\FantasyRemote101a\recv pcFileName=FantasyRemote iLanguage= 1 [SERVER] iAcceptVideo= 1 iAcceptAudio= 1 iAcceptInput= 1 iAutoAccept= 1 iAutoTray= 0 iConnectSound= 1 iEnablePassword= 0 pcPassword= pcPort=7902 [CLIENT] iAutoConnect= 0 pcPassword= pcDefaultPort=7902 [NETWORK] pcConnectAddr=192.168.1.1 pcPort=7902 [VIDEO] iEnable= 1 pcFcc=AMV3 pcFccServer= pcDiscription= pcDiscriptionServer= iFps= 30 iMouse= 2 iHalfsize= 0 iCapturblt= 0 iShared= 0 iSharedTime= 5 iVsync= 1 iCodecSendState= 1 iCompress= 2 pcPlugin= iPluginScan= 0 iPluginAspectW= 16 iPluginAspectH= 9 iPluginMouse= 1 iActiveClient= 0 iDesktop1= 1 iDesktop2= 2 iDesktop3= 0 iDesktop4= 3 iScan= 1 iFixW= 16 iFixH= 8 [AUDIO] iEnable= 1 iFps= 30 iVolume= 6 iRecDevice= 0 iPlayDevice= 0 pcSamplesPerSec=44100Hz pcChannels=2ch:Stereo pcBitsPerSample=16bit iRecBuffNum= 150 iPlayBuffNum= 4 [INPUT] iEnable= 1 iFps= 30 iMoe= 0 iAtlTab= 1 [MENU] iAlwaysOnTop= 0 iWindowMode= 0 iFrameSize= 4 iSnap= 1 [HOTKEY] iEnable= 1 key_IDM_HELP=0x00000070 mod_IDM_HELP=0x00000000 key_IDM_ALWAYSONTOP=0x00000071 mod_IDM_ALWAYSONTOP=0x00000000 key_IDM_CONNECT=0x00000072 mod_IDM_CONNECT=0x00000000 key_IDM_DISCONNECT=0x00000073 mod_IDM_DISCONNECT=0x00000000 key_IDM_CONFIG=0x00000000 mod_IDM_CONFIG=0x00000000 key_IDM_CODEC_SELECT=0x00000000 mod_IDM_CODEC_SELECT=0x00000000 key_IDM_CODEC_CONFIG=0x00000000 mod_IDM_CODEC_CONFIG=0x00000000 key_IDM_SIZE_50=0x00000074 mod_IDM_SIZE_50=0x00000000 key_IDM_SIZE_100=0x00000075 mod_IDM_SIZE_100=0x00000000 key_IDM_SIZE_200=0x00000076 mod_IDM_SIZE_200=0x00000000 key_IDM_SIZE_300=0x00000000 mod_IDM_SIZE_300=0x00000000 key_IDM_SIZE_400=0x00000000 mod_IDM_SIZE_400=0x00000000 key_IDM_CAPTUREWINDOW=0x00000077 mod_IDM_CAPTUREWINDOW=0x00000004 key_IDM_REGION=0x00000077 mod_IDM_REGION=0x00000000 key_IDM_DESKTOP1=0x00000078 mod_IDM_DESKTOP1=0x00000000 key_IDM_ACTIVE_MENU=0x00000079 mod_IDM_ACTIVE_MENU=0x00000000 key_IDM_PLUGIN=0x0000007A mod_IDM_PLUGIN=0x00000000 key_IDM_PLUGIN_SCAN=0x00000000 mod_IDM_PLUGIN_SCAN=0x00000000 key_IDM_DESKTOP2=0x00000078 mod_IDM_DESKTOP2=0x00000004 key_IDM_DESKTOP3=0x00000079 mod_IDM_DESKTOP3=0x00000004 key_IDM_DESKTOP4=0x0000007A mod_IDM_DESKTOP4=0x00000004 key_IDM_WINDOW_NORMAL=0x0000000D mod_IDM_WINDOW_NORMAL=0x00000004 key_IDM_WINDOW_NOFRAME=0x0000000D mod_IDM_WINDOW_NOFRAME=0x00000002 key_IDM_WINDOW_FULLSCREEN=0x0000000D mod_IDM_WINDOW_FULLSCREEN=0x00000001 key_IDM_MINIMIZE=0x00000000 mod_IDM_MINIMIZE=0x00000000 key_IDM_MAXIMIZE=0x00000000 mod_IDM_MAXIMIZE=0x00000000 key_IDM_REC_START=0x00000000 mod_IDM_REC_START=0x00000000 key_IDM_REC_STOP=0x00000000 mod_IDM_REC_STOP=0x00000000 key_IDM_SCREENSHOT=0x0000002C mod_IDM_SCREENSHOT=0x00000002 key_IDM_AUDIO_MUTE=0x00000073 mod_IDM_AUDIO_MUTE=0x00000004 key_IDM_AUDIO_VOLUME_DOWN=0x00000074 mod_IDM_AUDIO_VOLUME_DOWN=0x00000004 key_IDM_AUDIO_VOLUME_UP=0x00000075 mod_IDM_AUDIO_VOLUME_UP=0x00000004 key_IDM_CTRLALTDEL=0x00000023 mod_IDM_CTRLALTDEL=0x00000003 key_IDM_QUIT=0x00000000 mod_IDM_QUIT=0x00000000 key_IDM_MENU=0x0000007B mod_IDM_MENU=0x00000000 [OVERLAY] iIndicator= 1 iAlphaBlt= 1 iEnterHide= 0 pcFont=MS UI Gothic [AVI] iSound= 1 iFileSizeLimit= 100000 iPool= 4 iBuffSize= 32 iStartDiskSpaceCheck= 1 iStartDiskSpace= 1000 iRecDiskSpaceCheck= 1 iRecDiskSpace= 100 iCache= 0 iAutoOpen= 1 pcPath=C:\Documents and Settings\karthikeyan\My Documents\Downloads\fremote101a\FantasyRemote101a\avi [SCREENSHOT] iSound= 1 iAutoOpen= 1 pcPath=C:\Documents and Settings\karthikeyan\My Documents\Downloads\fremote101a\FantasyRemote101a\ss pcPlugin=BMP [CDLG_SERVER] mrcWnd.rcLeft= 667 mrcWnd.rcTop= 415 mrcWnd.rcRight= 1013 mrcWnd.rcBottom= 634 [CWND_CLIENT] miShowLog= 0 m_iOverlayLock= 0

  Read the article

• How to add IP range to a server?

  - by Efe Cakinberk

  Hello, First of all I must say that I'm ver inexperienced server and network user. But I rented a unmanaged dedicated server. Well I didn't know what unmanaged really means, then I learned it when I needed support. Well I must do everything by myself. I have a problem. I had already 4 IPs on my server when I rented it. But then I needed more Ips and my server assigned me 32 Ips in which I can only use 27 of them. 85.25.230.0 - 85.25.230.31 this is my Ip range and they say the following Ips must not be configured on the server: 85.25.230.0 - network address 85.25.230.1 - gateway address 85.25.230.2 - router redundancy 85.25.230.3 - router redundancy 85.25.230.31 - broadcast address But the problem is ok Ips are assigned to me but they are not setup on my server. How will I setup Ips to work on my server? I did this after my reseach on google: I used this command on command prompt: route add 85.25.230.0 mask 255.255.255.224 85.25.230.1 metric 1 if then it said OK!. and I thought they should be working. (btw, mask is given to me by my ISP and I don't know metric 1 and if means I just saw it on the net and write it here) I setup my domains via using Plesk Kontrol Panel. So i added one domain and setup one of my new Ips 85.25.230.5 to it. But no it is not working. When I visit the domain via browser, there is a Plesk page comes and says this domain is not configured on the server. Then I changed the domains Ip to one of my old Ips which are given to me with the server and which I have been using for my other domains for a long time. Ok in a second, domain started working. I set it back to my new Ip and domain did not work. As I said, I'm not an expert and do not now the logic. But I'm eager to learn. Can you tell me what might couse the problem and did I do wrong while setting up IP RANGE to my server, if so how can I set them up? Thank you, Efe

  Read the article

• How to disable hiddev96 in linux (or tell it to ignore a specific device)

  - by Miky D

  I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

  Read the article

• Apache2 & .htaccess : Apache ignoring AccessFile

  - by Elyx0

  Hi there here is my server configuration: DEBIAN 32Bits / PHP 5 / Apache Server version: Apache/2.2.3 - Server built: Mar 22 2008 09:29:10 The AccessFiles : grep -ni AccessFileName * apache2.conf:134:AccessFileName .htaccess apache2.conf:667:AccessFileName .httpdoverride All the AllowOverride statements in my apache2/ folder. mods-available/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-available/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit mods-enabled/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-enabled/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit sites-enabled/default:8: AllowOverride All sites-enabled/default:14: AllowOverride All sites-enabled/default:19: AllowOverride All sites-enabled/default:24: AllowOverride All sites-enabled/default:42: AllowOverride All The sites-enabled/default file : 1 <VirtualHost *> 2 ServerAdmin [email protected] 3 ServerName mysite.com 4 ServerAlias mysite.com 5 DocumentRoot /var/www/mysite.com/ 6 <Directory /> 7 Options FollowSymLinks 8 AllowOverride All 9 Order Deny,Allow 10 Deny from all 11 </Directory> 12 <Directory /var/www/mysite.com/> 13 Options Indexes FollowSymLinks MultiViews 14 AllowOverride All 15 Order allow,deny 16 allow from all 17 </Directory> 18 <Directory /var/www/mysite.com/test/> 19 AllowOverride All 20 </Directory> 21 22 ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ 23 <Directory "/usr/lib/cgi-bin"> 24 AllowOverride All 25 Options ExecCGI -MultiViews +SymLinksIfOwnerMatch 26 Order allow,deny 27 Allow from all 28 </Directory> 29 30 ErrorLog /var/log/apache2/error.log 31 32 # Possible values include: debug, info, notice, warn, error, crit, 33 # alert, emerg. 34 LogLevel warn 35 36 CustomLog /var/log/apache2/access.log combined 37 ServerSignature Off 38 39 Alias /doc/ "/usr/share/doc/" 40 <Directory "/usr/share/doc/"> 41 Options Indexes MultiViews FollowSymLinks 42 AllowOverride All 43 Order deny,allow 44 Deny from all 45 Allow from 127.0.0.0/255.0.0.0 ::1/128 46 </Directory> 47 48 49 50 51 52 53 54 </VirtualHost> If i change any Allow from all in Deny from all , it works whenever i put it. I've got one .htaccess at /mysite.com/.htaccess & one at /mysite.com/test/.htaccess with: Order Deny,Allow Deny from all Neither of them work i can still see my website. I've got mod_rewrite enabled but i don't think it does anything here. I've tried almost everything :/ It works on my local environnement (MAMP) but fails when on my Debian server.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >