Search Results

Search found 4453 results on 179 pages for 'kernel parametes'.

Page 75/179 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • display port on x230 not workgin

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • 12.04 x64 Server Login Failure

    - by ThoughtCoder
    After some serious GRUB issues after routine kernel updates, forcing a grub-reinstall via chroot and some single-user mode maintenance, I now cannot login to my server (except via single-user mode) When attempting to SSH to the server my connection is reset immediately after entering username - no password prompt is presented. I've plugged in my monitor and keyboard to the headless server and when trying to login I receive: login: "PAM Failure, aborting: Critical error - immediate abort" immediately after entering my username - again, no password prompt is displayed. I am able to gain access via kernel recovery mode and login as root through single-user mode with networking. I've attempted a dpkg reconfigure believing I may have had some incomplete/borked packages, but to no avail. Looking through /etc/pam.d/login doesn't seem to lead me in any obvious directions and I'm afraid I'm out of ideas. Googling doesn't help me much, one guy reinstalled (really don't want to do this) and the rest I could find were old Gentoo related bugs. Any tips?

    Read the article

  • Removing a module when I add a new better one?

    - by yinon
    I'm using this guide to install my TL-WN822N (Wireless/Wifi). I need to add 8192cu at the end of /etc/modules, but I see another module there (Copy-Paste file): # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. lp 8192cuvhba vhba Should I remove it or is that unnecessary? Thanks for any help!

    Read the article

  • No user/password boxes on login screen after updates today (June 30, 2012)

    - by Tony
    Just installed today's batch of updates, including new kernel 3.2.0-26 and rebooted. Now the screen just has a logo in the middle and "Ubuntu 12.04 LTS" in bottom left corner, but no box to choose which user to log in as, or to enter a password. CTRL-ALT-F1 gets me to a "login:" prompt, and I can log in - but I have no idea what to look at to find out what is wrong, or to fix this. Tried older kernels and recovery mode for current kernel - no joy, still no way to log into the graphics console.

    Read the article

  • Core i7 with 4GB - go 64 bit or stay 32bit..?

    - by tommed
    I have a Core i7 laptop with 4gb ram. In windows, the disadvantage of using the 32bit OS would be that a single app could not use more than 2gb of ram (+ the 2gb shared kernel-space memory) except when setting a boot switch which reduces the amount of shared kernel memory, then it's 3GB max per app. What disadvantages/limitations would I have in Ubuntu for sticking to the 32bit OS? (If any?) - As I only have 4GB of ram, I can't see why I need to use the 64bit version?

    Read the article

  • How do I get drivers working for an Nvidia GT560i on 12.04?

    - by keepitsimpleengineer
    I been using a test Xubuntu 12.04 LTS on my 64 bit workstation, because Ubuntu has dropped support for the nvidia graphic adapters my 10.04 LTS and I haven't been able to get them working. Now update manager has upgraded the kernel from 3.2.0-30-generic to 3.2.0-31-generic, and failed to produce a working nvidia module that the X server can load. Fortunately, when launching the 3.2.0-30-generic kernel, I still have use of the X server. Does anybody know a work-around or fix for this? I'm really worried, this is the last working Ubuntu distribution OS on the computer and I don't want to give up on Ubuntu. Details of problem here.

    Read the article

  • No wireless after resuming from suspend?

    - by lapor
    When I resume my computer from suspend it doesn't want to connect to any wireless connection. It looks like it is connecting, but after a while it asks me to retype a password for wireless connection. It connect after I restart it. I am using Toshiba Satellite A210 and Ubuntu 10.10 (I have the same problem with 10.04 and 11.04 beta2. 14:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) Subsystem: Askey Computer Corp. Device 7128 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at cfcf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k Kernel modules: ath5k Should I file a bug?

    Read the article

  • HD 6770M low graphics mode after update (AGAIN)

    - by Pihkal
    I have Ubuntu 12.04 LTS (re)installed on this laptop: I've also installed the fglrx-drivers for my ATI card (using apt-get),it appeared to work fine,that is until i updated my distro. Once again i got the "low graphics mode" error when i booted into the new kernel,booting in the old kernel works fine however. When i look into the logs i see "no screen found". This is the second time i install Ubuntu and the second time i run into problems with my graphics. Reinstalling isn't a solution since the problem keeps comming back. My question now is: does anyone know a REAL solution for this issue ar at least knows what's causing it? Any help would be greatly appreciated.

    Read the article

  • How do I get HDMI out working on an Acer AC700 HDMI?

    - by Kyle
    I have installed Ubuntu on my Acer AC700 (Chromebook) using both the Cr-48 method and the script method both of which I think are the same. The only thing that does not work is HDMI out. I assume this is because it uses the Chrome OS kernel to boot so I have hoped that eventually it would update and work. I'm currently running 12.04 with Kernel 3.4.0 and still no luck. I've tried booting in recovery for Ubuntu and attempting to get Xorg to generate a new config but I don't know enough to do anything else and that didn't work. Am I the only one out there? Is there no one else who wants this to be possible Any help is greatly appreciated.

    Read the article

  • Computer restarts when I choose my Lucid install from GRUB

    - by Alexx Hardt
    Hey, I have 4 OS's on my netbook, it's really more a toy. However, in my main OS (Ubuntu Lucid) is some data I don't like to lose. Today, whenever I choose this install from GRUB, the netbook (Asus eeePC 1001P if it's of help) waits 5 seconds (no kernel messages) and then reboots. The other entries (backtrack, Linux From Scratch, Windows XP) work fine. Can anyone hint me to where the error could be? It's not GRUB, right? So a reinstall wouldn't help? Is it the kernel? I'm afraid I didn't remember when and what the most recent automatic updates were.

    Read the article

  • Misused mke2fs and cannot boot into system

    - by surlogics
    I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

    Read the article

  • Ubuntu user expectations from 12.04 and future releases

    - by Rick Green - Turbo
    How much further ahead is 12.10 vs 12.04 in respect to kernel updates and applications? Example: Gimp's newest release is 2.8 which runs equally as well in both 12.04 and 12.10 and probably will in 13.04. What restricts 12.04 from having "the same" look, feel, applications and kernel as 12.10 or the upcoming 13.04? I know that it's more than a name change.....it's whats under the hood that counts. Incrementally upgrading, I feel is safer than radical changes from release to release. Trying to keep a stable desktop and current user experience, how far can I take updating applications before I absolutely have to make a distro upgrade from 12.04LTS

    Read the article

  • And again... VMware Player 4.0.4 on Ubuntu 12.04 (Precise Pangolin)

    Even with the new version of VMware Player 4.0.4 you are still required to patch their sources. So, same game as last month. Just changing the value of the required version in the kernel patch script of Stefano Angeleri (weltall) and you are done: nano patch-modules_3.2.0.sh Please change line 8 at the top of the script like so: plreqver=4.0.4 Save your modification and then run the following commands: sudo rm /usr/lib/vmware/modules/source/.patchedsudo ./patch-modules_3.2.0.shsudo service vmware restart And again, on first start VMware will present you their EULA which you have to accept, and everything gets back to normal operation mode. Interestingly, one day ago the Ubuntu repositories provided a newer kernel version 3.2.0-25, so everything is running fine for now.

    Read the article

  • Getting wireless N to work on Dell Vostro 3300?

    - by luisfpg
    I have a Dell Vostro 3300, which has a Broadcom BCM4313 wireless. The point is that I cannot make it work in N mode. NetwotkManager applet says I'm on 54 Mbit/s. Of course, my wireless router is N capable. I've double checked. Anyone knows what to do? Here is the output for lspci -v: 12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Device 0010 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: wl Kernel modules: wl, brcm80211 Thanks a lot.

    Read the article

  • NVIDIA driver problem after updating to 12.04

    - by patlan
    As the title says I have problems with the driver after updating to 12.04. The GUI doesnt start anymore, I only see the terminal. I have googled this for a couple of days now and have tried different things like running commands for update, upgrade and tried to uninstall and re-install the NVIDIA-drivers but with no success. No matter what I do I get this message: "Error: API mismatch: the NVIDIA kernel module has version 295.40, but this NVIDIA driver component has version 295.49. Please make sure that the kernel and all NVIDIA driver components has the same version." Is there anyway I can fix this from the terminal?

    Read the article

  • Dual display setup - only one displayed after logon

    - by oneofthemany
    During boot process my desktop shows both Monitors, but after log I only get one. I'm using Ubuntu 11.10 When I go into Displays its still only shows on Monitor. Here is my graphics card details: 01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0405 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_96, nvidia_173, nouveau, nvidiafb

    Read the article

  • Xubuntu - Apps Become Unresponsive Intermittently

    - by Levinaris
    Possibly Relevant Information: XUbuntu 12.04 LTS (precise) XFCE 4.8 AMD Graphics (Kernel driver in use: fglrx_pci, Kernel modules: fglrx, radeon) The primary symptom of this issue has been my active rdesktop session to stop responding while everything else appears to work normally. I have been killing rdesktop and re-launching it, with it freezing after a seemingly random time period. The fastest was within seconds. The longest was a couple hours, although it's usually within a few minutes. That being said, I have occasionally seen the terminal and web browsers also become unresponsive to keyboard input. They respond to clicks and will accept middle clicks (to paste text) without issue while remaining unresponsive to the keyboard input. I have been able to restore all functionality, including rdesktop, by switching workspaces and typing on the other workspace, then returning to the original workspace. What is being reset when I do this? What does this work-around/solution indicate may be the problem?

    Read the article

  • Mount CIFS share gives "mount error 127 = Key has expired"

    - by djk
    Hi, I'm currently replicating the setup of a CentOS box an am running into a strange error while trying to mount a samba share that resides on a NAS. The error I'm getting is: mount error 127 = Key has expired Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) The settings are identical to the old machine, the password is definitely correct as well. I have googled the issue of course, and looked at every single page that references this issue (not that many) and have still not found an answer. The older CentOS box is using version 3.0.28-0.el4.9 of Samba and the one I'm trying to setup now is 3.0.33-3.7.el5_3.1. I don't know if this has anything to do with it but it's certainly one of the only differences between the 2 setups. When I try the mount command this appears in the syslog: Sep 8 10:51:54 helvetica2 kernel: Status code returned 0xc0000072 NT_STATUS_ACCOUNT_DISABLED Sep 8 10:51:54 helvetica2 kernel: CIFS VFS: Send error in SessSetup = -127 Sep 8 10:51:54 helvetica2 kernel: CIFS VFS: cifs_mount failed w/return code = -127 The account is very much not disabled as it works on the old box using the same credentials. Has anyone else seen this problem? Thanks!

    Read the article

  • Mount CIFS share gives "mount error 127 = Key has expired"

    - by djk
    I'm currently replicating the setup of a CentOS box an am running into a strange error while trying to mount a samba share that resides on a NAS. The error I'm getting is: mount error 127 = Key has expired Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) The settings are identical to the old machine, the password is definitely correct as well. I have googled the issue of course, and looked at every single page that references this issue (not that many) and have still not found an answer. The older CentOS box is using version 3.0.28-0.el4.9 of Samba and the one I'm trying to setup now is 3.0.33-3.7.el5_3.1. I don't know if this has anything to do with it but it's certainly one of the only differences between the 2 setups. When I try the mount command this appears in the syslog: Sep 8 10:51:54 helvetica2 kernel: Status code returned 0xc0000072 NT_STATUS_ACCOUNT_DISABLED Sep 8 10:51:54 helvetica2 kernel: CIFS VFS: Send error in SessSetup = -127 Sep 8 10:51:54 helvetica2 kernel: CIFS VFS: cifs_mount failed w/return code = -127 The account is very much not disabled as it works on the old box using the same credentials. Has anyone else seen this problem? Thanks!

    Read the article

  • OTRS upgrade 3.0 to 3.1 fails

    - by Valentin0S
    Today I've started upgrading OTRS from version 2.3 to 2.4 , 2.4 to 3.0 and 3.0 to 3.1. Everything went smoothly except the upgrade from 3.0 to 3.1 OTRS provides a few perl scripts which make the upgrade easier. I've used these scripts for each upgrade step. The upgrade from 3.0 to 3.1 fails at the following after using the upgrade script. scripts/DBUpdate-to-3.1.pl The error is : root@tickets:/opt/otrs# su - otrs $ scripts/DBUpdate-to-3.1.pl Migration started... Step 1 of 24: Refresh configuration cache... If you see warnings about 'Subroutine Load redefined', that's fine, no need to worry! Subroutine Load redefined at /opt/otrs/Kernel/Config/Files/ZZZAAuto.pm line 5. Subroutine Load redefined at /opt/otrs/Kernel/Config/Files/ZZZAuto.pm line 4. done. Step 2 of 24: Check framework version... done. Step 3 of 24: Creating DynamicField tables (if necessary)... done. DBD::mysql::db do failed: Cannot add or update a child row: a foreign key constraint fails (`pp_otrs`.`dynamic_field`, CONSTRAINT `FK_dynamic_field_create_by_id` FOREIGN KEY (`create_by`) REFERENCES `users` (`id`)) at /opt/otrs-3.1.10/Kernel/System/DB.pm line 478. ERROR: OTRS-DBUpdate-to-3.1-10 Perl: 5.14.2 OS: linux Time: Wed Sep 5 15:36:20 2012 Message: Cannot add or update a child row: a foreign key constraint fails (`pp_otrs`.`dynamic_field`, CONSTRAINT `FK_dynamic_field_create_by_id` FOREIGN KEY (`create_by`) REFERENCES `users` (`id`)), SQL: 'INSERT INTO dynamic_field (name, label, field_order, field_type, object_type, config, valid_id, create_time, create_by, change_time, change_by) VALUES (?, ?, ?, 'Text', 'Ticket', '--- {} ', 1, '2012-09-05 15:36:20' , 1, '2012-09-05 15:36:20' , 1)' Traceback (20405): Module: main::_DynamicFieldCreation (v1.85) Line: 466 Module: scripts/DBUpdate-to-3.1.pl (v1.85) Line: 95 Could not create new DynamicField TicketFreeKey1 at scripts/DBUpdate-to-3.1.pl line 477. Step 4 of 24: Create new dynamic fields for free fields (text, key, date)... $ Did anyone else face the same issue? Thanks in advance

    Read the article

  • Time drift in Cloud Server - need to mainpulate GRUB config

    - by Aditya Advani
    We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

    Read the article

  • Umount stale glusterfs partition

    - by Khaled
    I am using glusterfs on several Ubuntu servers: two of them are running glusterfs servers in replication mode. Without any clear error, the glusterfs partition became stale and the system shows this error when I try to access the stale partition: Transport endpoint is not connected Also, when running ls -l on the parent folder I get: d????????? ? ? ? ? ? myfolder I tried all types of commands that I can find to umount this partition, but I could not get it done: umount -l /path/to/mount/point umount -f /path/to/mount/point Also, using fuser command to show processes accessing this folder did not work. Unload the fuse kernel module can not be done as it is clear from the kernel config that fuse is built into the kernel and not a loadable module. I found this line in /boot/config-2.6.32-24-server CONFIG_FUSE_FS=y I have been left with two options: Reboot the system. Create another mount point like myfolder2 and mount this again using sudo glusterfs -f /etc/glustefs/glusterfs.vol /path/to/folder2. Of course, I have chosen to go with option 2. Anyone faced such an issue before? Anyone has a better solution for such a case?

    Read the article

  • Reducing video mode switching during Linux boot

    - by Zack
    When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

    Read the article

  • Shorewall log question.

    - by Shikoru
    I have been getting various attempts to connect to ports on my shorewall firewall. The ports that I keep seeing connection attempts at are tcp 44444, tcp 44446, udp 55555 and every now and then some slight variation. I ran "netstat -a" and did not see anything listening on those ports. Is this something that I should be worried about or is it just some rouge computers out there? I have noticed alot of the ip addresses are from Spain and Mexico. May 25 18:39:35 Takkun kernel: [62516.626514] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=200.124.9.113 DST=72.xxx.xxx.xxx LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=51796 DF PROTO=TCP SPT=2071 DPT=44446 WINDOW=16384 RES=0x00 SYN URGP=0 May 25 18:39:52 Takkun kernel: [62535.433285] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=72.50.95.174 DST=72.xxx.xxx.xxx LEN=90 TOS=0x00 PREC=0x00 TTL=105 ID=31130 PROTO=UDP SPT=59505 DPT=55555 LEN=70 May 25 18:40:05 Takkun kernel: [62548.963413] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=77.12.37.1 DST=72.xxx.xxx.xxx LEN=90 TOS=0x00 PREC=0x00 TTL=108 ID=9585 PROTO=UDP SPT=20401 DPT=55555 LEN=70 That is the jist of what im seeing.

    Read the article

  • Mounting a VirtualBox shared folder on boot with fstab in OpenSuse 11.3

    - by ccook
    I have followed the steps found here, however, the share is not mounted on boot. The share will mount if i run 'mount -a' after booting. Why would the share not mount on boot? 1 - Set up a Virtual Machine and install OpenSUSE 11.2 2 - Create a shared folder on host (HostFolder) 3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices Shared Folders... 4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper install make gcc kernel-source kernel-hosttype/default-devel 5 - Run the Virtual Machine and go to Devices Guest Additions This mounts an iso image in your OpenSUSE guest. 6 - Open a root terminal and run cd /usr/src/linux make oldconfig && make prepare && make scripts && make dep cp ../linux-obj/$HOSTTYPE/default/Module.symvers . make prepare A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. * 7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image. 8 - Create shared folder in OpenSUSE (GuestFolder) 9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access. 10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0 11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >