Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 75/626 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How to set up port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

  - by mairtinh

  The basic situation that I have is a dedicated server running CentOS 5.4 At the moment I have one VM running Ubuntu 9.0.4. Later on, I will want to add another VM running Windows Server 2003 but at the moment I am focusing on getting Ubuntu up and running. The Ubuntu installation is working fine but I'm seriously struggling to get port forwarding working so that I can access websites to be hosted on the Ubuntu VM. As a newbie to Linux, I am confused about the relationship between IPTables and VMWare's own port forwarding. Here's what I've tried so far. The IP of my server is xxx.xxx.xxx.xxx and the provider support have told me that the subnet mask is 255.255.255.0, the gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (Those latter two surprise me a bit, I expected private gateway/network address rather than public ones.) First of all I tried Bridged Networking but had no success at all in communicating with the machine other than through the VMware console. I tried pinging it from the host (using ssh into the host) but no joy; also no Inernet access from the VM. I changed the interfaces configuration from DHCP to Static, using a static address of 192.168.1.100 and setting the gateway to xxx.xxx.xxx.1 as advised by the provider. No real difference, still cannot ping the guest from the host or vice versa and no Internet access from the guest. Then I tried NAT. The host automatically set the IP address to 192.168.132.128 with a gateway of 192.168.132.2 Now the guest has Internet access out and when I do a VNC to the host and open Firefox with 192.168.132.128 I can see the hosted website okay but I still cannot get into it from outside. I mentioned that I'm a bit confused about IPtables and VMware port forwarding, what I meant is that I'm not sure whether IPtable forwarding should be set to the IP address of the guest interface (192.168.132.128 in this case) or the gateway address 192.168.132.2 . I have a feeling that I'm missing something very simple here, can anybody tell me what it is?

  Read the article

• SerialPort ReadLine() after Thread.Sleep() goes crazy

  - by Mat

  Hi everybody, I've been fighting with this issue for a day and I can't find answer for it. I am trying to read data from GPS device trough COM port in Compact Framework C#. I am using SerialPort class (actually my own ComPort class boxing SerialPort, but it adds only two fields I need, nothing special). Anyway.. I am running while loop in a separate thread which reads line from the port, analyze NMEA data, print them, catch all exceptions and then I Sleep(200) the thread, cause I need CPU for other threads... Without Sleep it works fine, but uses 100% CPU.. When I dont use Sleep after few minutes the output from COM port looks like this: GPGSA,A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F GSA,A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F A,A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F ,18,12,271,24,24,05,020,24,14,04,326,25,11,03,023,*76 A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F 3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F 09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F ,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F as you can see the same message is read few times but cut. I wonder what I'm doing wrong... My port configuration: port.ReadBufferSize = 4096; port.BaudRate = 4800; port.DataBits = 8; port.Parity = Parity.None; port.StopBits = StopBits.One; port.NewLine = "\r\n"; port.ReadTimeout = 1000; port.ReceivedBytesThreshold = 100000; And my reading function: private void processGps(){ while (!closing) { //reconnect if needed try { string sentence = port.ReadLine(); //here print the sentence //analyze the sentence (this takes some time 50-100ms) } catch (TimeoutException) { Thread.Sleep(0); } catch (IOException ioex) { //handling IO exception (some info on the screen) } Thread.Sleep(200); } } There is some more stuff in this function like reconnection if the device is lost etc.. but it is not called when the GPS is connected properly.. I was trying port.DiscardInBuffer(); after some blocks of code (in TimeoutException, after read..) Did anyone had similar problem? I really dont know what I'm doing wrong.. The only way to get rig of it is removing the last Sleep... Thanks in advance! Best Regards, Mat

  Read the article

• What happens when several Java servlet apps running on the same port ?

  - by Frank

  Something strange happened to my servlets and I think I've figured out why, yet I'm more confused. I used Netbean6.7 to develop a Paypal IPN (Instant Payment Notification) message servlet, it listens on port 8080 by default for Paypal IPN messages. I used some sample Java code from it's web site, but when it ran, only about 1 in 10 messages came through, and they looked correct, but why 1 in 10 ? Not 100% or none ? So I asked some questions here and got some advices, one in particular points me to Google's App Engine, so I downloaded it and ran the demo guestbook while my IPN servlet is still running on Netbeans, the strange thing happened, after I entered "appengine-java-sdk-1.3.2\bin\dev_appserver.cmd appengine-java-sdk-1.3.2\demos\guestbook\war" from the command prompt, I went to the following url on my browser "http://localhost:8080/", I thought I would see the Google demo guestbook page, NO, what I saw was another servlet I developed 2 years ago : "Web Academy", online course registration app. How can that happen ? I never started it, and I haven't touch that project for years. I guess because it's also listening on port 8080, so now I understand why the IPN messages only came through 1 in 10 times, because another servlet was also listening on that port and could have got the messages intended for IPN, or some how those two servlets' processes mixed up and therefore couldn't respond to Paypal properly, and failed. In order to verify some of my guesses, I turn off Netbeans, and ran the Google guestbook again at the prompt, this time on my browser http://localhost:8080/ points to the demo guestbook page. My Urls look like this : [A] Paypal IPN : http://localhost:8080/PayPal_App/PayPal_Servlet [B] Web Academy : http://localhost:8080/ So now, my questions are : <1> Why the "Web Academy" servlet was auto started when I ran the Paypal servlet ? <2> If I change the IPN listening port to 8083, would that mean I can run both of them on my PC at the same time without affecting each other ? <3> But I still don't understand, [A] and [B] look different, if a page for [A] is refreshed, it should show the Paypal content, and another page looking at [B] should show the Web Academy content, and that's exactly what happens when I started Netbeans to run the Paypal servlet, both pages show their respective content correctly side by side without interfering with each other, how come the IPN messages couldn't get through 100% of the time ? <4> In Netbeans how to assign 8080 to servlet [A] and assign port 8083 to servlet [B] ? <5> How to turn off auto start of Web Academy by Netbeans ?

  Read the article

• Does Java 6 open a default port for JMX remote connections?

  - by Bob Cross

  My specific question has to do with JMX as used in JDK 1.6: if I am running a Java process using JRE 1.6 with com.sun.management.jmxremote in the command line, does Java pick a default port for remote JMX connections? Backstory: I am currently trying to develop a procedure to give to a customer that will enable them to connect to one of our processes via JMX from a remote machine. The goal is to facillitate their remote debugging of a situation occurring on a real-time display console. Because of their service level agreement, they are strongly motivated to capture as much data as possible and, if the situation looks too complicated to fix quickly, to restart the display console and allow it to reconnect to the server-side. I am aware the I could run jconsole on JDK 1.6 processes and jvisualvm on post-JDK 1.6.7 processes given physical access to the console. However, because of the operational requirements and people problems involved, we are strongly motivated to grab the data that we need remotely and get them up and running again. EDIT: I am aware of the command line port property com.sun.management.jmxremote.port=portNum The question that I am trying to answer is, if you do not set that property at the command line, does Java pick another port for remote monitoring? If so, how could you determine what it might be?

  Read the article

• Creating a HTTP handler for IIS that transparently forwards request to different port?

  - by Lasse V. Karlsen

  I have a public web server with the following software installed: IIS7 on port 80 Subversion over apache on port 81 TeamCity over apache on port 82 Unfortunately, both Subversion and TeamCity comes with their own web server installations, and they work flawlessly, so I don't really want to try to move them all to run under IIS, if that is even possible. However, I was looking at IIS and I noticed the HTTP redirect part, and I was wondering... Would it be possible for me to create a HTTP handler, and install it on a sub-domain under IIS7, so that all requests to, say, http://svn.vkarlsen.no/anything/here is passed to my HTTP handler, which then subsequently creates a request to http://localhost:81/anything/here, retrieves the data, and passes it on to the original requestee? In other words, I would like IIS to handle transparent forwards to port 81 and 82, without using the redirection features. For instance, Subversion doesn't like HTTP redirect and just says that the repository has been moved, and I need to relocate my working copy. That's not what I want. If anyone thinks this can be done, does anyone have any links to topics I need to read up on? I think I can manage the actual request parts, even with authentication, but I have no idea how to create a HTTP handler. Also bear in mind that I need to handle sub-paths and documents beneath the top-level domain, so http://svn.vkarlsen.no/whatever/here needs to be handled by a single handler, I cannot create copies of the handler for all sub-directories since paths are created from time to time.

  Read the article

• What happens when we say "listen to a port" ?

  - by smwikipedia

  Hi, When we start a server application, we always need to speicify the port number it listens to. But how is this "listening mechanism" implemented under the hood? My current imagination is like this: The operating system associate the port number with some buffer. The server application's responsibiligy is to monitor this buffer. If there's no data in this buffer, the server application's listen operation will just block the application. When some data arrives from the wire, the operating system will know that check the data and see if it is targed at this port number. And then it will fill the buffer. And then OS will notify the blocked server application and the server application will get the data and continue to run. Question is: If the above scenario is correct, how could the opearting system know there's data arriving from wire? It cannot be a busy pooling. Is it some kind of interrupt-based mechanism? If there's too much data arriving and the buffer is not big enough, will there be data loss? Is the "listen to a port" operation really a blocking operation? Many thanks.

  Read the article

• HAProxy reqrep remove URI on backend request

  - by Jim

  real quick question regarding HAProxy reqrep. I am trying to rewrite/replace the request that gets sent to the backend. I have the following example domain and URIs http://domain/web1 http://domain/web2 I want web1 to go to backend webfarm1, and web2 to go to webfarm2. Currently this does happen. However I want to strip off the web1 or web2 URI when the request is sent to the backend. Here is my haproxy.cfg frontend webVIP_80 mode http bind :80 #acl routing to backend acl web1_path path_beg /web1 acl web2_path path_beg /web2 #which backend use_backend webfarm1 if web1_path use_backend webfarm2 if web2_path default_backend webfarm1 backend webfarm1 mode http reqrep ^([^\ ]*)\ /web1/(.*) \1\ /\2 balance roundrobin option httpchk HEAD /index HTTP/1.1\r\nHost:\ example.com server webtest1 10.0.0.10:80 weight 5 check slowstart 5000ms server webtest2 10.0.0.20:80 weight 5 check slowstart 5000ms backend webfarm2 mode http reqrep ^([^\ ]*)\ /web2/(.*) \1\ /\2 balance roundrobin option httpchk HEAD /index HTTP/1.1\r\nHost:\ example.com server webtest1-farm2 10.0.0.110:80 weight 5 check slowstart 5000ms server webtest2-farm2 10.0.0.120:80 weight 5 check slowstart 5000ms If I go to http://domain/web1 or http://domain/web2 I see it in the error logs that the request on a server in each backend that the requst is for the resource /web1 or /web2 respectively. Therefore I believe there to be something wrong with my regular expression, even though I copied and pasted it from the Documentation. http://code.google.com/p/haproxy-docs/wiki/reqrep Summary: I'm trying to route traffic based on URI, however I want to strip the URI on the backend side. Go to http://domain/web1 -- backend request of / to webfarm1 Thank you! -Jim

  Read the article

• IIS 7 Authentication: Certain users can't authenticate, while almost all others can.

  - by user35335

  I'm using IIS 7 Digest authentication to control access to a certain directory containing files. Users access the files through a department website from inside our network and outside. I've set NTFS permissions on the directory to allow a certain AD group to view the files. When I click a link to one of those files on the website I get prompted for a username and password. With most users everything works fine, but with a few of them it prompts for a password 3 times and then get: 401 - Unauthorized: Access is denied due to invalid credentials. But other users that are in the group can get in without a problem. If I switch it over to Windows Authentication, then the trouble users can log in fine. That directory is also shared, and users that can't log in through the website are able to browse to the share and view files in it, so I know that the permissions are ok. Here's the portion of the IIS log where I tried to download the file (/assets/files/secure/WWGNL.pdf): 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bullet.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bgOFF.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:21 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 2 5 0 2010-02-19 19:47:36 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 0 2010-02-19 19:47:43 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:46 xxx.xxx.xxx.xxx GET /manager/media/script/_session.gif 0.19665693119168282 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 203 2010-02-19 19:47:46 xxx.xxx.xxx.xxx POST /manager/index.php - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 296 2010-02-19 19:47:56 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:59 xxx.xxx.xxx.xxx GET /favicon.ico - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 404 0 2 0 Here's the Failed Logon attempt in the Security Log: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 2/19/2010 11:47:43 AM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: WEB4.net.domain.org Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: jim.lastname Account Domain: net.domain.org Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: 10.5.16.138 Source Port: 50065 Detailed Authentication Information: Logon Process: WDIGEST Authentication Package: WDigest Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2010-02-19T19:47:43.890Z" /> <EventRecordID>2276316</EventRecordID> <Correlation /> <Execution ProcessID="612" ThreadID="692" /> <Channel>Security</Channel> <Computer>WEB4.net.domain.org</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">jim.lastname</Data> <Data Name="TargetDomainName">net.domain.org</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc000006a</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">WDIGEST</Data> <Data Name="AuthenticationPackageName">WDigest</Data> <Data Name="WorkstationName">-</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">10.5.16.138</Data> <Data Name="IpPort">50065</Data> </EventData> </Event>

  Read the article

• Sticky connection and HTTPS support for HAProxy

  - by Saif

  Hi Mates, We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

  Read the article

• Setting up a transparent SSL proxy

  - by badunk

  I've got a linux box set up with 2 network cards to inspect traffic going through port 80. One card is used to go out to the internet, the other one is hooked up to a networking switch. The point is to be able to inspect all HTTP and HTTPS traffic on devices hooked up to that switch for debugging purposes. I've written the following rules for iptables: nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.1:1337 -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 1337 -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On 192.168.2.1:1337, I've got a transparent http proxy using Charles (http://www.charlesproxy.com/) for recording. Everything's fine for port 80, but when I add similar rules for port 443 (SSL) pointing to port 1337, I get an error about invalid message through Charles. I've used SSL proxying on the same computer before with Charles (http://www.charlesproxy.com/documentation/proxying/ssl-proxying/), but have been unsuccessful with doing it transparently for some reason. Some resources I've googled say its not possible - I'm willing to accept that as an answer if someone can explain why. As a note, I have full access to the described set up including all the clients hooked up to the subnet - so I can accept self-signed certs by Charles. The solution doesn't have to be Charles-specific since in theory, any transparent proxy will do. Thanks! Edit: After playing with it a little, I was able to get it working for a specific host. When I modify my iptables to the following (and open 1338 in charles for reverse proxy): nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.1:1337 -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 1337 -A PREROUTING -i eth1 -p tcp -m tcp --dport 443 -j DNAT --to-destination 192.168.2.1:1338 -A PREROUTING -i eth1 -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 1338 -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE I am able to get a response, but with no destination host. In the reverse proxy, if I just specify that everything from 1338 goes to a specific host that I wanted to hit, it performs the hand shake properly and I can turn on SSL proxying to inspect the communication. The setup is less than ideal because I don't want to assume everything from 1338 goes to that host - any idea why the destination host is being stripped? Thanks again

  Read the article

• How to change SMP affinity of an IRQ on Ubuntu domU inside Xen XCP?

  - by Alexander Gladysh

  I'd like to change IRQ SMP affinity for reasons, outlined in this question: CPU0 is swamped with eth1 interrupts But I can't — I see Input/output error when I try to write to /proc/irq/*/smp_affinity. Please point me to the HOWTO on the matter. (A formal reference on /proc/irq/*/ would be cool as well.) Gory details: Note that this is a VM inside an Ubuntu-based Xen XCP host. $ uname -a Linux MYHOST 2.6.38-15-virtual #59-Ubuntu SMP Fri Apr 27 16:40:18 UTC 2012 i686 i686 i386 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.04 Release: 11.04 Codename: natty $ sudo cat /proc/irq/*/smp_affinity 01 01 01 01 01 80 80 80 80 80 80 40 40 40 40 40 40 20 20 20 20 20 20 10 10 10 10 10 10 08 08 08 08 08 08 04 04 04 04 04 04 02 02 02 02 02 02 01 01 01 01 01 01 Update. The error details: $ N=$(grep -c processor /proc/cpuinfo) $ echo $N 8 $ printf %x $((2**N-1)) ff $ printf %x $((2**N-1)) | sudo tee /proc/irq/*/smp_affinity fftee: /proc/irq/288/smp_affinity: Input/output error tee: /proc/irq/289/smp_affinity: Input/output error tee: /proc/irq/290/smp_affinity: Input/output error tee: /proc/irq/291/smp_affinity: Input/output error tee: /proc/irq/292/smp_affinity: Input/output error tee: /proc/irq/293/smp_affinity: Input/output error tee: /proc/irq/294/smp_affinity: Input/output error tee: /proc/irq/295/smp_affinity: Input/output error tee: /proc/irq/296/smp_affinity: Input/output error tee: /proc/irq/297/smp_affinity: Input/output error tee: /proc/irq/298/smp_affinity: Input/output error tee: /proc/irq/299/smp_affinity: Input/output error tee: /proc/irq/300/smp_affinity: Input/output error tee: /proc/irq/301/smp_affinity: Input/output error tee: /proc/irq/302/smp_affinity: Input/output error tee: /proc/irq/303/smp_affinity: Input/output error tee: /proc/irq/304/smp_affinity: Input/output error tee: /proc/irq/305/smp_affinity: Input/output error tee: /proc/irq/306/smp_affinity: Input/output error tee: /proc/irq/307/smp_affinity: Input/output error tee: /proc/irq/308/smp_affinity: Input/output error tee: /proc/irq/309/smp_affinity: Input/output error tee: /proc/irq/310/smp_affinity: Input/output error tee: /proc/irq/311/smp_affinity: Input/output error tee: /proc/irq/312/smp_affinity: Input/output error tee: /proc/irq/313/smp_affinity: Input/output error tee: /proc/irq/314/smp_affinity: Input/output error tee: /proc/irq/315/smp_affinity: Input/output error tee: /proc/irq/316/smp_affinity: Input/output error tee: /proc/irq/317/smp_affinity: Input/output error tee: /proc/irq/318/smp_affinity: Input/output error tee: /proc/irq/319/smp_affinity: Input/output error tee: /proc/irq/320/smp_affinity: Input/output error tee: /proc/irq/321/smp_affinity: Input/output error tee: /proc/irq/322/smp_affinity: Input/output error tee: /proc/irq/323/smp_affinity: Input/output error tee: /proc/irq/324/smp_affinity: Input/output error tee: /proc/irq/325/smp_affinity: Input/output error tee: /proc/irq/326/smp_affinity: Input/output error tee: /proc/irq/327/smp_affinity: Input/output error tee: /proc/irq/328/smp_affinity: Input/output error tee: /proc/irq/329/smp_affinity: Input/output error tee: /proc/irq/330/smp_affinity: Input/output error tee: /proc/irq/331/smp_affinity: Input/output error tee: /proc/irq/332/smp_affinity: Input/output error tee: /proc/irq/333/smp_affinity: Input/output error tee: /proc/irq/334/smp_affinity: Input/output error tee: /proc/irq/335/smp_affinity: Input/output error Update. irqbalance is running: $ sudo service irqbalance status irqbalance start/running, process 560

  Read the article

• Can't make virtual host working

  - by sica07

  I have to create a virtual host on a server which, previously hosted a single website (domain name). Now I'm trying to add a second domain on this server (using the same nameserver). What I've done so far: Initially there was no virtual host so I've made one for the second domain: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /var/www/bla ServerName www.blabla.com ServerAlias blabla.com <Directory /var/www/blabla> Order deny,allow Allow from all AllowOverride All </Directory> </VirtualHost *:80> Because nothing happend, I changed the DocumentRoot of the apache server to /var/www (initially was the root document of the first website -/var/www/html) and created a virtual host for the first domain too: <VirtualHost *:80> DocumentRoot /var/www/html ServerName www.first.com ServerAlias first.com <Directory /var/www/html> Order deny,allow Allow from all AllowOverride All </Directory> </VirtualHost *:80> In this case, first.com is working ok, but bla.com not. When I ping blabla.com I get the "unkown host" response. What am I doing wrong? Do I have to modify something in the DNS settings too? Thank you.

  Read the article

• Varnish + Nginx + multiple IP addresses

  - by adnan

  This is my first shot at making Varnish work on my dedicated server which hosts 2 domains with 2 separate IP-addresses. My simplified setup is as follows: Nginx conf server { listen ip-address-1:8080; } server { listen ip-address-2:8080; } Varnish vcl backend default { .host = "127.0.0.1"; .port = "80"; } And in the varnish conf I have defined VARNISH_LISTEN_PORT=80 Varnish and Nginx (and php-fpm) are running properly but when I try to go to my website it shows the welcome to nginx page. The headers don't have the x-varnish in it. It seems that for some reason varnish is not listening to port 80. I'm suspecting this has to do with the vcl file where it is listening to the 127.0.0.1 host. I'm running two wordpress sites. Where should I look for to get Varnish working properly? Cheers, Adnan EDIT: Nginx seems to be in 8080 correctly but Varnish is not listening to the right ip address. Using Jens multiple varnish ip addresses netstat -lnp yields: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 46.105.40.241:8080 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 5.135.166.39:8080 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 2544/named tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 1195/vsftpd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1184/sshd tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN 2544/named tcp 0 0 46.105.40.241:443 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 5.135.166.39:443 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 127.0.0.1:6082 0.0.0.0:* LISTEN 21350/varnishd tcp 0 0 :::80 :::* LISTEN 21351/varnishd tcp 0 0 ::1:53 :::* LISTEN 2544/named tcp 0 0 :::22 :::* LISTEN 1184/sshd tcp 0 0 ::1:953 :::* LISTEN 2544/named udp 0 0 127.0.0.1:53 0.0.0.0:* 2544/named udp 0 0 ::1:53 :::* 2544/named default.vcl backend ikhebeenbril { .host = "5.135.166.39"; .port = "8080"; } backend sunculture { .host = "46.105.40.241"; .port = "8080"; } sub vcl_recv { if (server.ip == "5.135.166.39") { set req.backend = ikhebeenbril; } else { set req.backend = sunculture; } ... } sub vcl_hash { hash_data(server.ip); if (req.http.host) { hash_data(req.http.host); } hash_data(req.url); if (req.http.Accept-Encoding) { hash_data(req.http.Accept-Encoding); } return (hash); } nginx server blocks server { listen 5.135.166.39:80; listen 5.135.166.39:443 default ssl spdy; server_name www.ikhebeenbril.nl; } server { listen 46.105.40.241:80; listen 46.105.40.241:443 default ssl spdy; server_name www.thesunculture.com; }

  Read the article

• Why are people trying to connect to me network on TCP port 445?

  - by Solignis

  I was playing with my new syslog server and had my m0n0wall firewall logs forwarded as a test, I noticed a bunch of recent firewall log entries that say that it blocked other WAN IPs from my ISP (I checked) from connecting to me on TCP port 445. Why would a random computer be trying to connect to me on a port apperently used for Windows SMB shares? Just internet garbage? A port scan? I am just curious. here is what I am seeing Mar 15 23:38:41 gateway/gateway ipmon[121]: 23:38:40.614422 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:42 gateway/gateway ipmon[121]: 23:38:41.665571 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:43 gateway/gateway ipmon[121]: 23:38:43.165622 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.614524 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.808856 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.836313 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx,xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.305633 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.490778 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.550230 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:43:33 gateway/gateway ipmon[121]: 23:43:33.185836 fxp0 @0:19 b 98.86.34.225,64060 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.405137 fxp0 @0:19 b 98.86.34.225,64081 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.454384 fxp0 @0:19 b 98.86.34.225,64089 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast I blacked out part of my IP address for my own safety.

  Read the article

• iptables prerouting to redirect source ip address on ethernet

  - by Kevin Campion

  I have 2 ip adresses on the Internet who redirect on the same machine. On this machine, one Debian runs on OpenVZ. I can set iptables rules to redirect all http request to the Debian. iptables prerouting -d ip_address_2 DNAT --to ip_address_local_1 +--------------+ | | | V | ip_address_local_1 I| +------+ +----------+ N|ip_address_1 | |-----|Debian1 VE|-- Apache's log T|-----------------|OpenVZ| +----------+ [client ip_address_1] E| | | | R|ip_address_2 | | | N|--------------+ | | E| +------+ T| Iptables' rules : iptables -t nat -A PREROUTING -p tcp -i eth0 -d ip_address_2 --dport 80 -j DNAT --to ip_address_local_1:80 iptables -A FORWARD -p tcp -i eth0 -o venet0 -d ip_address_local_1 --dport 80 -j ACCEPT iptables -A FORWARD -p tcp -i venet0 -o eth0 -s ip_address_local_1 --sport 80 -j ACCEPT When I go to webpage with "http://ip_address_2", I can see the good content but the ip address on access log file is ip_address_1, I would like to see my ISP's ip address. Any ideas?

  Read the article

• Sticky connection and HTTPS support for HAProxy

  - by Saif

  We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

  Read the article

• How to determine which ports are open/closed on a FIREWALL?

  - by Rahl

  It seems no one has asked this question before (most regard host-based firewalls). Anyone familiar with port scanning tools (e.g. nmap) knows all about SYN scanning, FIN scanning, and the like to determine open ports on a host machine. Question is though, how do you determine the open ports on a firewall itself (disregard whether the host you're trying to connect to behind the firewall has those particular ports open or closed). This is assuming the firewall is blocking your IP connection. Example: We all communicate with serverfault.com through port 80 (web traffic). A scan on a host would reveal port 80 is open. If serverfault.com is behind a firewall and still allows this traffic through, then we can assume the firewall has port 80 open also. Now let's assume the firewall is blocking you (e.g. your IP address is under the deny list or is missing in the allowed list). You know port 80 has to be open (it works for appropriate IP addresses), but when you (the disallowed IP) attempt any scanning, all port scan attempts on the firewall drop the packet (including port 80, which we know to be open). So, how might we accomplish a direct firewall scan to reveal open/closed ports on the firewall itself, while still using the disallowed IP?

  Read the article

• iptables configuration to work with apache2 mod_proxy

  - by swdalex

  Hello! I have iptables config like this: iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --sport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A OUTPUT -p tcp --sport 443 -j ACCEPT Also, I have apache virtual host: <VirtualHost *:80> ServerName wiki.myite.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8901/ ProxyPassReverse / http://localhost:8901/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> My primary domain www.mysite.com is working well with this configuration (I don't use proxy redirect on it). But my virtual host wiki.mysite.com is not responding. Please, help me to setup iptables config to allow wiki.mysite.com working too. I think, I need to setup iptables FORWARDING options, but I don't know how. update: I have 1 server with 1 IP. On server I have apache2.2 on 80 port. Also I have tomcat6 on 8901 port. In apache I setup to forwarding domain wiki.mysite.com to tomcat (mysite.com:8901). I want to secure my server by disabling all ports, except 80, 22 and 443.

  Read the article

• Why is my IMAP port not showing as open ( yet it works? )

  - by Leo

  Ive recently setup Postfix and Dovecot IMAP on a Debian Lenny box. Sending to this domain works fine and reading the email via IMAP works fine too. I'm curious though as to why when running nmap, port 10143 is not shown as open. nmap -sS -O 127.0.0.1 Starting Nmap 4.62 ( http://nmap.org ) at 2011-11-26 21:30 GMT Interesting ports on localhost.localdomain (127.0.0.1): Not shown: 1711 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 80/tcp open http 3306/tcp open mysql Am I missing something with NMAP? Thanks Leo

  Read the article

• Apche ssl is not working

  - by user1703321

  I have configure virtual host on 80 and 443 port(Centos 5.6 and apache 2.2.3), following is the sample, i have wrote the configuration in same order Listen 80 Listen 443 NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> ServerAdmin [email protected] ServerName www.abc.be ServerAlias abc.be . . </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName www.abc.fr ServerAlias abc.fr . . </VirtualHost> then i have define 443 <VirtualHost *:443> ServerAdmin [email protected] ServerName www.abc.be ServerAlias abc.be . . SSLEngine on SSLCertificateFile /etc/ssl/private/abc.be.crt SSLCertificateKeyFile /etc/ssl/private/abc.be.key SSLCertificateChainFile /etc/ssl/private/gd_bundle_be.crt </VirtualHost> <VirtualHost *:443> ServerAdmin [email protected] ServerName www.abc.fr ServerAlias abc.fr . . SSLEngine on SSLCertificateFile /etc/ssl/private/abc.fr.crt SSLCertificateKeyFile /etc/ssl/private/abc.fr.key SSLCertificateChainFile /etc/ssl/private/gd_bundle_fr.crt </VirtualHost> First ssl certificate for abc.be is working fine, but 2nd domian abc.fr still load first ssl. following the output of apachictl -s VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:443 is a NameVirtualHost default server www.abc.be (/etc/httpd/conf/httpd.conf:1071) port 443 namevhost www.abc.fr (/etc/httpd/conf/httpd.conf:1071) Thanks

  Read the article

• HAProxy - forward to a different web server based on URI

  - by Saggi Malachi

  I have an HTTP farm with the following configuration: listen webfarm 10.254.23.225:80 mode http balance roundrobin cookie SERVERID insert option httpclose option forwardfor option httpchk HEAD /check.txt HTTP/1.0 server webA 10.254.23.4:80 cookie A check server webB 10.248.23.128:80 cookie B check I would like to add some option which would forward all requests for a specific URI (i.e /special) to a 3rd web server. How should I do it?

  Read the article

• Switch HTTP Virtual Host to HTTPS Virtual Host

  - by Kumar

  We are using apache web server with RHEL 6.4. Currently we configured Name based virtual host on server. Enabled "Namebased Virtualhost *:80" and created /etc/httpd/conf.d/example-com.conf <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/vhost/example.com/public_html ServerName www.example.com ServerAlias example.com ErrorLog /var/log/httpd/vhosts/example-com-error_log CustomLog /var/log/httpd/vhosts/example-com-access_log common </VirtualHost> I've located my ssl certificates by /etc/httpd/conf.d/ssl.conf In this case how can I switch 80 site to 433 and also redirect all requests to 80 to 443

  Read the article

• How to config putty remote port forwarding to connect mysql?

  - by kev

  I installed MySQL to a Windows box. I want to connect it from a Linux box. I run plink to setup a remote port forwarding in Windows box. I try to connect it from Linux box, but it's not working. Windows (192.168.1.101) C:\> plink -v -N -R 3306:localhost:3306 [email protected] -pw ADMIN Also tried putty with this config: Port forwarding: R3306->localhost:3306 Linux (192.168.1.102) $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) $ nc localhost 3306 J 5.5.283V6L[fnu¦¦!¦$N>-c-R9bbG{mysql_native_password

  Read the article

• Tomato QoS: Why is some traffic unclassified when there are classifications for it?

  - by Armitage

  Ok, I am trying to tweak my router to give priority to some traffic. My classifications seem to cover just about everything but I still see ~60 to ~80% of the traffic as unclassified: TCP 192.168.1.100 64137 192.168.1.1 80 Unclassified TCP 192.168.1.100 64175 192.168.1.1 80 Unclassified TCP 192.168.1.100 64144 192.168.1.1 443 Unclassified I assume that the 64### ports are just what my WAP uses to send packets inside my home network. But my classifications seems to cover any traffic for destination ports 80 and 443: (partial list) TCP Dst Port: 80,443 High WWW TCP/UDP Dst Port: 1024-65535 Lowest Bulk Traffic Why do I have so much unclassified traffic if I have a classification that should cover it?

  Read the article

• http://localhost:8080 is not working on running apacher Server through XAMPP

  - by Dinesh Kumar

  I am unable to configure a PHP/MySQL/Apache environment on my local machine using XAMPP. In my xampp control panel the Apache and MySQL status is as started, but localhost is not working. I have tried the following method but still i am unable to execute: I tried to reinstall after uninstalling several time. I changed the "Listen 80" to Listen localhost:80, localhost:8080, 127.0.0.1:80,127.0.0.1:8080, MySystemIP:80/8080 and tried to execute the relevant url in my browser. I executed the netstat -noa and tasklist and found Apache is is using Port80. Skype is also not using the port80. I edited the firewall to allow port80. Also disabled the firewall. Is there any other solution to fix my problem. I remember 8 months back everything worked properly. Now when i try to reinstall xampp the issue raised it. I am Using Win-xp os. Thanks in advance

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >