Search Results

Search found 4157 results on 167 pages for 'zero subnet'.

Page 75/167 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• VPN Connection causes DNS to use wrong DNS server

  - by Bryan

  I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

  Read the article

• VMXNET3 nic loses the ability to update ARP table after N hours

  - by Peter

  I have a fedora 18 VM that stops updating the arp table on eth1 after running for a number of hours to days. There are other VMs on the same hypervisor that can access all of the same networks without issue. A tcpdump of the offending NIC shows only ARP broadcasts but no responses. None of the other VMs on the vDS see the ARP broadcasts from the offending NIC. The only way I can currently solve the problem is to reboot the VM and then everything works for a while. I've tried changing the port on the vDS and even flipping the network configurations after I lose eth1's ARP table, but the ARP problem follows eth1 but I can access the machines that were originally on eth1. If I statically add the arp entries for machines on the same subnet I have no problems with connectivity. The Hypervisor is an HP BL49X series with flex-10 network modules. Has anyone seen anything like this before?

  Read the article

• Single-port 2600 router with 2900XL switch

  - by Slava Maslennikov

  I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• iPhone Cannot log into WiFi suddenly [closed]

  - by Stanley

  I suddenly get into this strange problem. My iPhone has been using the WiFi setup at my home for more than a year. Suddenly it cannot connect to the internet despite still having the full WiFi signal icon. Have an older iPhone 3 GS and it can still browse the net using the same WiFi. So the wireless router should be working. When I check the non-functioning iPhone, it has the "Router" and the "DNS" entries blank while the functioning iPhone has entries on both of the fields. Also the subnet Mask are different. Please help.

  Read the article

• Not Able To Connect to Shared Resource

  - by bobber205

  We are using an older version of BartPE and are not able to connect to shared folders on our subnet. It says the network name could not be found. Connecting to the shared folder on the machine that is hosting it works fine. Any ideas on what might cause this? Thanks! Edit1: Got wireshark running and monitored traffic from the offending machine and tried to map. ZERO packets from the other machine were seen. :(

  Read the article

• How to drop all subnets outside of the US using iptables

  - by Jim

  I want to block all subnets outside the US. I've made a script that has all of the US subnets in it. I want to disallow or DROP all but my list. Can someone give me an example of how I can start by denying everything? This is the output from -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:ftp state NEW DROP icmp -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And these are the rules iptables --F iptables --policy INPUT DROP iptables --policy FORWARD DROP iptables --policy OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -i eth0 --dport 21 -m state --state NEW -j ACCEPT iptables -A INPUT -p icmp -j DROP Just for clarity, with these rules, I can still connect to port 21 without my subnet list. I want to block ALL subnets and just open those inside the US.

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• Using 2 Transparent HAProxy for load balancing

  - by Nyxynyx

  We can configure HAProxy to be a transparent proxy by using the guide here, where one of the steps says ...to put the backend servers in a different subnet to the front end clients and make sure that the default gateway points back at the HAProxy load balancer. However when we need to have 2 transparent HAProxy in front of our balanced servers (for redundancy), it seems like this wont work as we can only set one gateway for our balanced servers. What will be the correct way to setup the system such that we can have 2 transparent HAProxy infront of the balanced servers? The main reason for having transparent proxies is the need to find the client's IP addresses over TCP.

  Read the article

• I would like to start multiple computers at once, What software do I use?

  - by Matt 'Trouble' Esse

  I have turned on Wake On Lan on all of the BIOSes in the PCs and I have a simple batch file that runs a free command wolcmd.exe Wake on Lan Command Line The syntax is as follows: wolcmd [mac address] [ip address] [subnet mask] [port number] The batch file looks a little like this.... wolcmd 009027a324fe 195.188.159.20 255.255.255.0 8900 wolcmd 009024a731da 212.86.64.31 255.255.255.0 8900 It's OK but It's not very user friendly (I need to set this up for other people to use and administer) Can you suggest a Windows (XP/Vixta/7) Alternative with a GUI? Free is cool, but a good paid for version is fine if you think it's worth it! Thanks in advance for your informed suggestions

  Read the article

• Configuring Apache reverse proxy

  - by Martin

  I have loadbalancer server and edges. I am trying to configure reverse proxy in order to hide the backend servers PL1,2,3. PL 1,2,3 are not located in same subnet. They are located in different locations. PL1 Lb1 -> PL2 PL3 I tried to configure Apache reverse proxy but it is not sending request to PL1,2,3. Reverse proxy worked only when I configured apache to send request to local server on other port. ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /PL1 http://PL1server.com/ ProxyPassReverse /PL1 http://PL1server.com/ The above configuration did not worked. Could you help me to solve the issue. Or is there other proxy types like Squid,Socks5 to solve this issue. Does the reverse proxy fails if we use IP address or domain URL in ProxyPass and ProxyPassReverse ?

  Read the article

• Hyper-V virtual machine unable to get IP address from DHCP server running on same physical box

  - by Bronumski

  We have a Windows server 2008 R2 with two network cards running AD, DHCP, DNS and Hyper-V The first nic is setup with a static IP address and DHCP, WDS, and DNS are bound to it. The second nic is configured in Hyper-V to be only used by Hyper-V and has been automatically configured so that only the virtual switch is enabled on the adapter. DHCP and DNS work fine for all physical machines on the network. It also works for Virtual Machines running on another physical box. Virtual machines that are bound to the virtual switch network adapter are unable to get a IP address. If the virtual machine is given a static IP address with correct subnet, gateway and dns everything works. Has anyone else got this working?

  Read the article

• Postfix multiple checks

  - by xBlue

  I want to achieve the following with Postfix: Run all emails through a black list Allow any clients sending to a list of domains Allow some clients sending to any domain This is what I have: (postfix is on 10.0.8.0 and some of the senders are 10.0.8.0 and 10.0.9.0) mynetworks_style = subnet smtpd_recipient_restrictions = check_recipient_access sqlite:/etc/postfix/access-bl.query, check_client_access hash:/etc/postfix/trusted_clients, check_recipie nt_access hash:/etc/postfix/local_domains, reject_unauth_destination, permit So, right now the black list works. File /etc/postfix/trusted_clients contains who can send anywhere (3), file /etc/postfix/local_domains contains where you can send (2). Those two are fine, they return properly. My problem is getting all three working together. Not sure if it's an ordering issue. Currently sending a test from 10.0.9.17 and I get Relay access denied. If I add: mynetworks = 10.0.8.0/24 10.0.9.0/24 then anyone can send anywhere, so #2 is not working. Postfix version is 2.10 on Ubuntu 14.04. Any ideas?

  Read the article

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• Multiple Subnets on home network... would this work?

  - by rockinthesixstring

  We are looking at renting out the basement suit in our home and want to offer internet as part of the package. I however do not want the downstairs tennent to have access to our network (home office = private data). We currently have a pfsense firewall as our gateway and a Windows Server 2003 box is doing our primary DHCP (192.168.0.0/24) and DNS. Here's what I'd like to do... I'd like to setup another subnet on the DHCP server (192.168.1.0/24), and hook in another wireless router (as access point only) and address it as 192.168.1.1... from there the router will hook into our primary switch and then out through the firewall. Will Server 2003 (If I add a 192.168.1.x/24 IP to the nic) serve DHCP to the devices that connect to the new router, and will it isolate that from our network? Thanks in advance... I'm very new to multiple subnets.

  Read the article

• How does one guarantee a remote client the same local IP address every time when connecting to a VPN?

  - by Joe Carroll

  I need to configure a VPN for secure remote access to a PACS serving DICOM radiological images. The DICOM standard requires that any clients accessing the PACS must be using a fixed IP address that is pre-registered in PACS. I haven't implemented this solution before and would appreciate any guidance. I believe it should be possible to use RADIUS on the server to authenticate users connecting to the VPN and with it assign each user their own specific local subnet IP address, which would be registered with the PACS. The server runs Windows Server 2003 R2 Enterprise Edition SP2 and the VPN device is a FortiGate 60C. The What would be the best and/or simplest way to set this up?

  Read the article

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• How to automatically restart RRAS service after OpenVPN

  - by JT

  I have OpenVPN set up on a Windows Server 2003 box using a routed configuration. This allows users to connect and access the work LAN subnet. There are remote hosts/services however that are only accessible when used via the work network. To enable access these, I push routes out to the clients to make sure traffic to these destinations goes across the VPN, and NAT the traffic using RRAS. This all works, except: if I restart the OpenVPN service, network traffic stops working until I restart the RRAS service as well. Is there a good way for me to make the RRAS service start/restart after OpenVPN? Are service dependencies the way to go? Obviously I could write a batch file to do this, but I'd like to make the process as bullet-proof and obvious as I can so it doesn't cause problems for other admins.

  Read the article

• XenServer VM's lose network settings

  - by Ash

  We deploy virtual machines using Citrix XenServer 6.0 for our clients. Two seperate clients experience the same issue: when a Server 2008 virtual machine is restarted, the static IP addresses (network address, subnet, gateway, primary DNS) don't appear to apply correctly as the IP's cannot be pinged, network services cannot be accessed etc. The issue is resolved by manually switching the network adapters to DHCP, then re-setting them to the original static IP's. While not a major issue, it's a pain when restarting servers due to Windows Updates, plus iSCSI drives need to be manually connected to Windows again via iSCSI Initiator. We have tried removed the network adapters from the virtual machine under XenCentre but without luck. Anyone experienced similar issues?

  Read the article

• design a large scale network for an organization

  - by Essam

  i want to design a large scale network for an organization with HQ and two branches. i want to use a class A subnet. if i am using the network address 30.0.0.0 for the whole organization how can it be different from another organization company or whatever which is using the same address in another country? now i have the three locations for this organization,so i need 5 subnets [one for the HQ,two for branch A and branch B , one for connecting A to HQ and one for connecting branch B with HQ since i will use central DHCP server at the HQ,is that (number of subnetting) right? is it advisable to use class A or class B for this organization it term of address that will be wasted (let's say it is a university with two branches in two different states)?!

  Read the article

• Win 2k3 server's network problem.

  - by Sam

  I'm running 4 of Win2k3 64bit servers in the same subnet. It's been more than an year that I've running them without a problem. Recently, I kept losing the connection to one of the server. Let's say it's 'server A' which has a problem. Losing the connection means that I can't access to server A from the other servers. I've checked if server A has any internet connection problems or are there any abnomal event logs in the eventvwr - but haven't found any problems. The problem usually resolved if I restart the server again. But as time goes by, it keeps happen again and again. I can't afford to restart the server every time, and I really want to find out the reason. Can anyone help me out? Let me know if you guys need any of more information.

  Read the article

• Apache2 proxypass

  - by gatsby

  i'm trying to figure out why my apache2 reverse proxy doesn't work... hope someone can clarify. i'm using an apache server as a gateway with proxy pass: 10.184.1.2 is the IP. these are PP instructions i inserted in the 000-default config file. ProxyPass / http://192.168.102.31/ ProxyPassReverse / http://192.168.102.31/ the host 192.168.102.31 is an internal IP of a subnet wich is not reachable directly by clients, but only by the apache gateway. when i try to access such a address: http://apache_gateway_name/dir i see the client trying to reach 192.168.102.31 address and of course timeout occurs. can someone help? Best regards

  Read the article

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• Windows/Samba connection error

  - by Gomibushi

  I have a Linux fileserver serving up /home for linux and windows users. I was able to connect from my windows client, but not from a DC. Then suddenly I could connect from the DC too. The linux servers run Centrify clients, and as such are part of the domain. All on same subnet. This is what the the log.smbd says, repeatedly: [2010/02/11 11:25:57, 0] lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.200.3. Error = Connection reset by peer On Windows it appeared as an "unknown error". EDIT: the error code is "0x80004005". We are developing a system depended on the samba share, and are worried this will appear again. It would be nice to pin point the root of this. Any ideas what this might be? Places to look?

  Read the article

• windows firewall and network location switch after establishing a vpn connection

  - by Konrads

  I am looking for a reasonable solution for network location switching after VPN connection is established for Windows 7. The scenario is as follows: For location public (employee plugging in his laptop in hotel, public wi-fi,etc) all inbound connections are restricted, only outbound VPN + www is enabled. Employee then initiates a VPN connection, VPN pushes routes to 10.0.0.0/8 subnet Now I would like to have lax security rules for traffic from/to 10.0.0.0/8 that comes through the VPN interface, while still protecting the laptop from traffic that comes via uplink interface as if it was private. How to achieve this switching and duality? One option I see is switching to IPSec...

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >