action center - Page 76

How to find the exact center of a String? (Android)

- by jax

How to find the exact pixel center of a String? I need this for drawing onto a canvas.

Read the article

width 100% on checkboxes makes it center aligned. How can I counter this?

- by nick

I am setting all inputs to a 100% width via CSS. However, checkboxes are center aligned for some reason. Anyway to counter this? I don't want to have to use attribute selection via css since they're not fully supported.

Read the article

Testing Routes in ASP.NET MVC with MvcContrib

- by Guilherme Cardoso

I've decide to write about unit testing in the next weeks. If we decide to develop with Test-Driven Developement pattern, it's important to not forget the routes. This article shows how to test routes. I'm importing my routes from my RegisterRoutes method from the Global.asax of Project.Web created by default (in SetUp). I'm using ShouldMapTp() from MvcContrib: http://mvccontrib.codeplex.com/ The controller is specified in the ShouldMapTo() signature, and we use lambda expressions for the action and parameters that are passed to that controller. [SetUp] public void Setup() { Project.Web.MvcApplication.RegisterRoutes(RouteTable.Routes); } [Test] public void Should_Route_HomeController() { "~/Home" .ShouldMapTo<HomeController>(action => action.Index()); } [Test] public void Should_Route_EventsController() { "~/Events" .ShouldMapTo<EventsController>(action => action.Index()); "~/Events/View/44/Concert-DevaMatri-22-January-" .ShouldMapTo<EventosController>(action => action.Read(1, "Title")); // In this example,44 is the Id for my Event and "Concert-DevaMatri-22-January" is the title for that Event } [TearDown] public void teardown() { RouteTable.Routes.Clear(); }

Read the article

Building Simple Workflows in Oozie

- by dan.mcclary

Introduction More often than not, data doesn't come packaged exactly as we'd like it for analysis. Transformation, match-merge operations, and a host of data munging tasks are usually needed before we can extract insights from our Big Data sources. Few people find data munging exciting, but it has to be done. Once we've suffered that boredom, we should take steps to automate the process. We want codify our work into repeatable units and create workflows which we can leverage over and over again without having to write new code. In this article, we'll look at how to use Oozie to create a workflow for the parallel machine learning task I described on Cloudera's site. Hive Actions: Prepping for Pig In my parallel machine learning article, I use data from the National Climatic Data Center to build weather models on a state-by-state basis. NCDC makes the data freely available as gzipped files of day-over-day observations stretching from the 1930s to today. In reading that post, one might get the impression that the data came in a handy, ready-to-model files with convenient delimiters. The truth of it is that I need to perform some parsing and projection on the dataset before it can be modeled. If I get more observations, I'll want to retrain and test those models, which will require more parsing and projection. This is a good opportunity to start building up a workflow with Oozie. I store the data from the NCDC in HDFS and create an external Hive table partitioned by year. This gives me flexibility of Hive's query language when I want it, but let's me put the dataset in a directory of my choosing in case I want to treat the same data with Pig or MapReduce code. CREATE EXTERNAL TABLE IF NOT EXISTS historic_weather(column 1, column2) PARTITIONED BY (yr string) STORED AS ... LOCATION '/user/oracle/weather/historic'; As new weather data comes in from NCDC, I'll need to add partitions to my table. That's an action I should put in the workflow. Similarly, the weather data requires parsing in order to be useful as a set of columns. Because of their long history, the weather data is broken up into fields of specific byte lengths: x bytes for the station ID, y bytes for the dew point, and so on. The delimiting is consistent from year to year, so writing SerDe or a parser for transformation is simple. Once that's done, I want to select columns on which to train, classify certain features, and place the training data in an HDFS directory for my Pig script to access. ALTER TABLE historic_weather ADD IF NOT EXISTS PARTITION (yr='2010') LOCATION '/user/oracle/weather/historic/yr=2011'; INSERT OVERWRITE DIRECTORY '/user/oracle/weather/cleaned_history' SELECT w.stn, w.wban, w.weather_year, w.weather_month, w.weather_day, w.temp, w.dewp, w.weather FROM ( FROM historic_weather SELECT TRANSFORM(...) USING '/path/to/hive/filters/ncdc_parser.py' as stn, wban, weather_year, weather_month, weather_day, temp, dewp, weather ) w; Since I'm going to prepare training directories with at least the same frequency that I add partitions, I should also add that to my workflow. Oozie is going to invoke these Hive actions using what's somewhat obviously referred to as a Hive action. Hive actions amount to Oozie running a script file containing our query language statements, so we can place them in a file called weather_train.hql. Starting Our Workflow Oozie offers two types of jobs: workflows and coordinator jobs. Workflows are straightforward: they define a set of actions to perform as a sequence or directed acyclic graph. Coordinator jobs can take all the same actions of Workflow jobs, but they can be automatically started either periodically or when new data arrives in a specified location. To keep things simple we'll make a workflow job; coordinator jobs simply require another XML file for scheduling. The bare minimum for workflow XML defines a name, a starting point, and an end point: <workflow-app name="WeatherMan" xmlns="uri:oozie:workflow:0.1"> <start to="ParseNCDCData"/> <end name="end"/> </workflow-app> To this we need to add an action, and within that we'll specify the hive parameters Also, keep in mind that actions require <ok> and <error> tags to direct the next action on success or failure. <action name="ParseNCDCData"> <hive xmlns="uri:oozie:hive-action:0.2"> <job-tracker>localhost:8021</job-tracker> <name-node>localhost:8020</name-node> <configuration> <property> <name>oozie.hive.defaults</name> <value>/user/oracle/weather_ooze/hive-default.xml</value> </property> </configuration> <script>ncdc_parse.hql</script> </hive> <ok to="WeatherMan"/> <error to="end"/> </action> There are a couple of things to note here: I have to give the FQDN (or IP) and port of my JobTracker and NameNode. I have to include a hive-default.xml file. I have to include a script file. The hive-default.xml and script file must be stored in HDFS That last point is particularly important. Oozie doesn't make assumptions about where a given workflow is being run. You might submit workflows against different clusters, or have different hive-defaults.xml on different clusters (e.g. MySQL or Postgres-backed metastores). A quick way to ensure that all the assets end up in the right place in HDFS is just to make a working directory locally, build your workflow.xml in it, and copy the assets you'll need to it as you add actions to workflow.xml. At this point, our local directory should contain: workflow.xml hive-defaults.xml (make sure this file contains your metastore connection data) ncdc_parse.hql Adding Pig to the Ooze Adding our Pig script as an action is slightly simpler from an XML standpoint. All we do is add an action to workflow.xml as follows: <action name="WeatherMan"> <pig> <job-tracker>localhost:8021</job-tracker> <name-node>localhost:8020</name-node> <script>weather_train.pig</script> </pig> <ok to="end"/> <error to="end"/> </action> Once we've done this, we'll copy weather_train.pig to our working directory. However, there's a bit of a "gotcha" here. My pig script registers the Weka Jar and a chunk of jython. If those aren't also in HDFS, our action will fail from the outset -- but where do we put them? The Jython script goes into the working directory at the same level as the pig script, because pig attempts to load Jython files in the directory from which the script executes. However, that's not where our Weka jar goes. While Oozie doesn't assume much, it does make an assumption about the Pig classpath. Anything under working_directory/lib gets automatically added to the Pig classpath and no longer requires a REGISTER statement in the script. Anything that uses a REGISTER statement cannot be in the working_directory/lib directory. Instead, it needs to be in a different HDFS directory and attached to the pig action with an <archive> tag. Yes, that's as confusing as you think it is. You can get the exact rules for adding Jars to the distributed cache from Oozie's Pig Cookbook. Making the Workflow Work We've got a workflow defined and have collected all the components we'll need to run. But we can't run anything yet, because we still have to define some properties about the job and submit it to Oozie. We need to start with the job properties, as this is essentially the "request" we'll submit to the Oozie server. In the same working directory, we'll make a file called job.properties as follows: nameNode=hdfs://localhost:8020 jobTracker=localhost:8021 queueName=default weatherRoot=weather_ooze mapreduce.jobtracker.kerberos.principal=foo dfs.namenode.kerberos.principal=foo oozie.libpath=${nameNode}/user/oozie/share/lib oozie.wf.application.path=${nameNode}/user/${user.name}/${weatherRoot} outputDir=weather-ooze While some of the pieces of the properties file are familiar (e.g., JobTracker address), others take a bit of explaining. The first is weatherRoot: this is essentially an environment variable for the script (as are jobTracker and queueName). We're simply using them to simplify the directives for the Oozie job. The oozie.libpath pieces is extremely important. This is a directory in HDFS which holds Oozie's shared libraries: a collection of Jars necessary for invoking Hive, Pig, and other actions. It's a good idea to make sure this has been installed and copied up to HDFS. The last two lines are straightforward: run the application defined by workflow.xml at the application path listed and write the output to the output directory. We're finally ready to submit our job! After all that work we only need to do a few more things: Validate our workflow.xml Copy our working directory to HDFS Submit our job to the Oozie server Run our workflow Let's do them in order. First validate the workflow: oozie validate workflow.xml Next, copy the working directory up to HDFS: hadoop fs -put working_dir /user/oracle/working_dir Now we submit the job to the Oozie server. We need to ensure that we've got the correct URL for the Oozie server, and we need to specify our job.properties file as an argument. oozie job -oozie http://url.to.oozie.server:port_number/ -config /path/to/working_dir/job.properties -submit We've submitted the job, but we don't see any activity on the JobTracker? All I got was this funny bit of output: 14-20120525161321-oozie-oracle This is because submitting a job to Oozie creates an entry for the job and places it in PREP status. What we got back, in essence, is a ticket for our workflow to ride the Oozie train. We're responsible for redeeming our ticket and running the job. oozie -oozie http://url.to.oozie.server:port_number/ -start 14-20120525161321-oozie-oracle Of course, if we really want to run the job from the outset, we can change the "-submit" argument above to "-run." This will prep and run the workflow immediately. Takeaway So, there you have it: the somewhat laborious process of building an Oozie workflow. It's a bit tedious the first time out, but it does present a pair of real benefits to those of us who spend a great deal of time data munging. First, when new data arrives that requires the same processing, we already have the workflow defined and ready to run. Second, as we build up a set of useful action definitions over time, creating new workflows becomes quicker and quicker.

Read the article

Cocos2D: Change animation based on joystick direction

- by Blade

I'm trying to get my figure to look in the right directions, based on the input of the joystick. So if I tilt left it looks left and the left animation is used, if I used right, it looks right and right animation is used, if up, then up, down, down and so on. I just get animation for front and back. Also if I press up I see the back of the figure correctly, but it won't go back into the original state when I don't press up anymore. -(void)applyJoystick:(SneakyJoystick *)aJoystick forTimeDelta:(float) deltaTime { CGPoint scaledVelocity = ccpMult(aJoystick.velocity, 128.0f); CGPoint oldPosition = [self position]; CGPoint newPosition = ccp(oldPosition.x + scaledVelocity.x * deltaTime, oldPosition.y + scaledVelocity.y * deltaTime); [self setPosition:newPosition]; id action = nil; int extra = 50; if ((int) aJoystick.degrees > 180 - extra && aJoystick.degrees < 180 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimLeft restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 360 - extra && aJoystick.degrees < 360 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimRight restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 90 - extra && aJoystick.degrees < 90 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimBack restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 270 - extra && aJoystick.degrees < 270 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimFront restoreOriginalFrame:NO]; } if (action != nil) { [self runAction:action]; } } }

Read the article

Mysql query does not update row [closed]

- by Gerculy Robert

// Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // get value of id that sent from address bar /*$id=$_GET['$usrid'];*/ // Retrieve data from database $sql="SELECT * FROM user WHERE id='$usrid'"; $result=mysql_query($sql); $rows=mysql_fetch_array($result); ?> <table width="400" border="0" cellspacing="1" cellpadding="0"> <tr> <form name="form1" method="post" action="update.php"> <td> <table width="100%" border="0" cellspacing="1" cellpadding="0"> <tr> <td> </td> <td colspan="3"><strong>Update site info</strong> </td> </tr> <tr> <td align="center"> </td> <td align="center"> </td> <td align="center"> </td> <td align="center"> </td> </tr> <tr> <td align="center"> </td> <td align="center"><strong>User Name</strong></td> <td align="center"><strong>Site url</strong></td> <td align="center"><strong>Url banner</strong></td> </tr> <tr> <td> </td> <td align="center"> <input name="username" type="text" id="username" value="<? echo $rows['username']; ?>"> </td> <td align="center"> <input name="siteurl" type="text" id="siteurl" value="<? echo $rows['siteurl']; ?>" size="40"> </td> <td> <input name="urlbanner" type="text" id="urlbanner" value="<? echo $rows['urlbanner']; ?>" size="40"> </td> </tr> <tr> <td> </td> <td> <input name="id" type="hidden" id="id" value="<? echo $rows['id']; ?>"> </td> <td align="center"> <input type="submit" name="Submit" value="Submit"> </td> <td> </td> </tr> </table> </td> </form> </tr> </table> <?php // close connection mysql_close(); ?> // Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // update data in mysql database $sql="update user SET siteurl='$siteurl', username='$username', urlbanner='$urlbanner' WHERE id=$usrid"; $result=mysql_query($sql); // if successfully updated. if($result){ echo "Successful"; echo "<BR>"; echo "<a href='edit.php'>View result</a>"; } else { echo "ERROR"; } Hello, I have this two pages wich should update 3 rows. The problem is it does not update all , only 2 . I tried over 1 hour to find the problem but nothing. The row , siteurl, is not being updated at all . The table is : varchar(255) Database and session is ok. Any idea ? It's just a simple update code , should work fine :(

Read the article

How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

- by Chadddada

I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

Read the article

ASP.Net MVC 2 Auto Complete Textbox With Custom View Model Attribute & EditorTemplate

- by SeanMcAlinden

In this post I’m going to show how to create a generic, ajax driven Auto Complete text box using the new MVC 2 Templates and the jQuery UI library. The template will be automatically displayed when a property is decorated with a custom attribute within the view model. The AutoComplete text box in action will look like the following: The first thing to do is to do is visit my previous blog post to put the custom model metadata provider in place, this is necessary when using custom attributes on the view model. http://weblogs.asp.net/seanmcalinden/archive/2010/06/11/custom-asp-net-mvc-2-modelmetadataprovider-for-using-custom-view-model-attributes.aspx Once this is in place, make sure you visit the jQuery UI and download the latest stable release – in this example I’m using version 1.8.2. You can download it here. Add the jQuery scripts and css theme to your project and add references to them in your master page. Should look something like the following: Site.Master <head runat="server"> <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /></title> <link href="../../Content/Site.css" rel="stylesheet" type="text/css" /> <link href="../../css/ui-lightness/jquery-ui-1.8.2.custom.css" rel="stylesheet" type="text/css" /> <script src="../../Scripts/jquery-1.4.2.min.js" type="text/javascript"></script> <script src="../../Scripts/jquery-ui-1.8.2.custom.min.js" type="text/javascript"></script> </head> Once this is place we can get started. Creating the AutoComplete Custom Attribute The auto complete attribute will derive from the abstract MetadataAttribute created in my previous post. It will look like the following: AutoCompleteAttribute using System.Collections.Generic; using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Attributes { public class AutoCompleteAttribute : MetadataAttribute { public RouteValueDictionary RouteValueDictionary; public AutoCompleteAttribute(string controller, string action, string parameterName) { this.RouteValueDictionary = new RouteValueDictionary(); this.RouteValueDictionary.Add("Controller", controller); this.RouteValueDictionary.Add("Action", action); this.RouteValueDictionary.Add(parameterName, string.Empty); } public override void Process(ModelMetadata modelMetaData) { modelMetaData.AdditionalValues.Add("AutoCompleteUrlData", this.RouteValueDictionary); modelMetaData.TemplateHint = "AutoComplete"; } } } As you can see, the constructor takes in strings for the controller, action and parameter name. The parameter name will be used for passing the search text within the auto complete text box. The constructor then creates a new RouteValueDictionary which we will use later to construct the url for getting the auto complete results via ajax. The main interesting method is the method override called Process. With the process method, the route value dictionary is added to the modelMetaData AdditionalValues collection. The TemplateHint is also set to AutoComplete, this means that when the view model is parsed for display, the MVC 2 framework will look for a view user control template called AutoComplete, if it finds one, it uses that template to display the property. The View Model To show you how the attribute will look, this is the view model I have used in my example which can be downloaded at the end of this post. View Model using System.ComponentModel; using Mvc2Templates.Attributes; namespace Mvc2Templates.Models { public class TemplateDemoViewModel { [AutoComplete("Home", "AutoCompleteResult", "searchText")] [DisplayName("European Country Search")] public string SearchText { get; set; } } } As you can see, the auto complete attribute is called with the controller name, action name and the name of the action parameter that the search text will be passed into. The AutoComplete Template Now all of this is in place, it’s time to create the AutoComplete template. Create a ViewUserControl called AutoComplete.ascx at the following location within your application – Views/Shared/EditorTemplates/AutoComplete.ascx Add the following code: AutoComplete.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var propertyName = ViewData.ModelMetadata.PropertyName; var propertyValue = ViewData.ModelMetadata.Model; var id = Guid.NewGuid().ToString(); RouteValueDictionary urlData = (RouteValueDictionary)ViewData.ModelMetadata.AdditionalValues.Where(x => x.Key == "AutoCompleteUrlData").Single().Value; var url = Mvc2Templates.Views.Shared.Helpers.RouteHelper.GetUrl(this.ViewContext.RequestContext, urlData); %> <input type="text" name="<%= propertyName %>" value="<%= propertyValue %>" id="<%= id %>" class="autoComplete" /> <script type="text/javascript"> $(function () { $("#<%= id %>").autocomplete({ source: function (request, response) { $.ajax({ url: "<%= url %>" + request.term, dataType: "json", success: function (data) { response(data); } }); }, minLength: 2 }); }); </script> There is a lot going on in here but when you break it down it’s quite simple. Firstly, the property name and property value are retrieved through the model meta data. These are required to ensure that the text box input has the correct name and data to allow for model binding. If you look at line 14 you can see them being used in the text box input creation. The interesting bit is on line 8 and 9, this is the code to retrieve the route value dictionary we added into the model metada via the custom attribute. Line 11 is used to create the url, in order to do this I created a quick helper class which looks like the code below titled RouteHelper. The last bit of script is the code to initialise the jQuery UI AutoComplete control with the correct url for calling back to our controller action. RouteHelper using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Views.Shared.Helpers { public static class RouteHelper { const string Controller = "Controller"; const string Action = "Action"; const string ReplaceFormatString = "REPLACE{0}"; public static string GetUrl(RequestContext requestContext, RouteValueDictionary routeValueDictionary) { RouteValueDictionary urlData = new RouteValueDictionary(); UrlHelper urlHelper = new UrlHelper(requestContext); int i = 0; foreach(var item in routeValueDictionary) { if (item.Value == string.Empty) { i++; urlData.Add(item.Key, string.Format(ReplaceFormatString, i.ToString())); } else { urlData.Add(item.Key, item.Value); } } var url = urlHelper.RouteUrl(urlData); for (int index = 1; index <= i; index++) { url = url.Replace(string.Format(ReplaceFormatString, index.ToString()), string.Empty); } return url; } } } See it in action All you need to do to see it in action is pass a view model from your controller with the new AutoComplete attribute attached and call the following within your view: <%= this.Html.EditorForModel() %> NOTE: The jQuery UI auto complete control expects a JSON string returned from your controller action method… as you can’t use the JsonResult to perform GET requests, use a normal action result, convert your data into json and return it as a string via a ContentResult. If you download the solution it will be very clear how to handle the controller and action for this demo. The full source code for this post can be downloaded here. It has been developed using MVC 2 and Visual Studio 2010. As always, I hope this has been interesting/useful. Kind Regards, Sean McAlinden.

Read the article

any clue in these logs why keyboard audio and internet are messed up

- by mmj

Jun 7 00:01:18 Isis lightdm: pam_unix(lightdm-autologin:session): session opened for user mimi by (uid=0) Jun 7 00:01:18 Isis lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Jun 7 00:01:26 Isis polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.36 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale zh_CN.UTF-8) Jun 7 00:01:29 Isis dbus[610]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.44" (uid=1000 pid=1763 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1219 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 00:07:55 Isis sudo: pam_unix(sudo:auth): authentication failure; logname=mimi uid=1000 euid=0 tty=/dev/pts/1 ruser=mimi rhost= user=mimi Jun 7 00:08:11 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/add-apt-repository ppa:colingille/freshlight Jun 7 00:08:11 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 00:08:32 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 00:11:20 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/apt-get install gparted Jun 7 00:11:20 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 00:11:59 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 00:17:02 Isis CRON[2651]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 00:17:02 Isis CRON[2651]: pam_unix(cron:session): session closed for user root Jun 7 00:17:32 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain ONE-SHOT authorization for action com.ubuntu.pkexec.gparted for unix-process:2655:96838 [/bin/sh /usr/bin/gparted-pkexec] (owned by unix-user:mimi) Jun 7 00:17:32 Isis pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Jun 7 00:17:32 Isis pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Jun 7 00:17:32 Isis pkexec[2657]: mimi: Executing command [USER=root] [TTY=unknown] [CWD=/home/mimi] [COMMAND=/usr/sbin/gparted] Jun 7 00:48:15 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain ONE-SHOT authorization for action com.ubuntu.pkexec.gparted for unix-process:3813:281120 [/bin/sh /usr/bin/gparted-pkexec] (owned by unix-user:mimi) Jun 7 00:48:15 Isis pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Jun 7 00:48:15 Isis pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Jun 7 00:48:15 Isis pkexec[3815]: mimi: Executing command [USER=root] [TTY=unknown] [CWD=/home/mimi] [COMMAND=/usr/sbin/gparted] Jun 7 01:17:01 Isis CRON[3960]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 01:17:01 Isis CRON[3960]: pam_unix(cron:session): session closed for user root Jun 7 02:08:52 Isis gnome-screensaver-dialog: gkr-pam: unlocked login keyring Jun 7 02:17:01 Isis CRON[4246]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 02:17:01 Isis CRON[4246]: pam_unix(cron:session): session closed for user root Jun 7 02:17:05 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/apt-get install unetbootin Jun 7 02:17:05 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 02:17:57 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:18:59 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:19:26 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:33:21 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:40:04 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin rootcheck=no Jun 7 02:40:04 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 03:17:01 Isis CRON[5506]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 03:17:01 Isis CRON[5506]: pam_unix(cron:session): session closed for user root Jun 7 03:33:24 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: mimi : 3 incorrect password attempts ; TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin showall=yes 'rootcheck=no' Jun 7 03:33:43 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 04:17:01 Isis CRON[6119]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 04:17:01 Isis CRON[6119]: pam_unix(cron:session): session closed for user root Jun 7 04:18:35 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.79 [/usr/bin/python /usr/bin/landscape-client-ui-install] (owned by unix-user:mimi) Jun 7 04:19:11 Isis groupadd[6702]: group added to /etc/group: name=landscape, GID=127 Jun 7 04:19:11 Isis groupadd[6702]: group added to /etc/gshadow: name=landscape Jun 7 04:19:11 Isis groupadd[6702]: new group: name=landscape, GID=127 Jun 7 04:19:11 Isis useradd[6706]: new user: name=landscape, UID=115, GID=127, home=/var/lib/landscape, shell=/bin/false Jun 7 04:19:12 Isis usermod[6711]: change user 'landscape' password Jun 7 04:19:12 Isis chage[6716]: changed password expiry for landscape Jun 7 04:19:37 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6146:1543697 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:20:20 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6832:1555313 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:21:04 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:6827:1555123 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:21:08 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:6827:1555123 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:21:44 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.87 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:22:27 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:7830:1567424 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:25:50 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:7876:1584865 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:25:52 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:7876:1584865 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 05:11:57 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.95 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 05:17:02 Isis CRON[8708]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 05:17:02 Isis CRON[8708]: pam_unix(cron:session): session closed for user root Jun 7 05:28:03 Isis lightdm: pam_unix(lightdm-autologin:session): session opened for user mimi by (uid=0) Jun 7 05:28:03 Isis lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Jun 7 05:28:17 Isis polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.32 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Jun 7 05:28:32 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.44" (uid=1000 pid=1736 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 06:17:01 Isis CRON[2391]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 06:17:02 Isis CRON[2391]: pam_unix(cron:session): session closed for user root Jun 7 06:25:02 Isis CRON[2492]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 06:25:02 Isis CRON[2492]: pam_unix(cron:session): session closed for user root Jun 7 07:17:01 Isis CRON[3174]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 07:17:01 Isis CRON[3174]: pam_unix(cron:session): session closed for user root Jun 7 07:30:01 Isis CRON[3397]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 07:30:01 Isis CRON[3397]: pam_unix(cron:session): session closed for user root Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:09:01 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:09:59 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:10:55 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:17:01 Isis CRON[4215]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 08:17:01 Isis CRON[4215]: pam_unix(cron:session): session closed for user root Jun 7 09:17:02 Isis CRON[4766]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 09:17:02 Isis CRON[4766]: pam_unix(cron:session): session closed for user root Jun 7 10:17:02 Isis CRON[5046]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 10:17:02 Isis CRON[5046]: pam_unix(cron:session): session closed for user root Jun 7 11:17:02 Isis CRON[5325]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 11:17:02 Isis CRON[5325]: pam_unix(cron:session): session closed for user root Jun 7 12:17:01 Isis CRON[5617]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 12:17:01 Isis CRON[5617]: pam_unix(cron:session): session closed for user root Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): authentication failure; logname= uid=1000 euid=1000 tty=:0.0 ruser= rhost= user=mimi Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): getting password (0x00000388) Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): pam_get_item returned a password Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): request wbcLogonUser failed: WBC_ERR_AUTH_ERROR, PAM error: PAM_USER_UNKNOWN (10), NTSTATUS: NT_STATUS_NO_SUCH_USER, Error message was: No such user Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): conversation failed Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): auth could not identify password for [mimi] Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): getting password (0x00000388) Jun 7 13:08:08 Isis lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jun 7 13:08:08 Isis lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :1 Jun 7 13:08:13 Isis lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "mimi" Jun 7 13:08:16 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.91" (uid=104 pid=5961 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 13:08:18 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.98" (uid=104 pid=5999 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 13:10:15 Isis lightdm: pam_unix(lightdm:session): session closed for user lightdm Jun 7 13:17:02 Isis CRON[6181]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 13:17:02 Isis CRON[6181]: pam_unix(cron:session): session closed for user root Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 13:55:14 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 14:02:33 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6736:3087856 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:02:51 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6752:3089992 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:03:14 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6763:3092515 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:17:01 Isis CRON[6933]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 14:17:01 Isis CRON[6933]: pam_unix(cron:session): session closed for user root Jun 7 15:17:02 Isis CRON[7611]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 15:17:02 Isis CRON[7611]: pam_unix(cron:session): session closed for user root

Read the article

Issues with signal handling [closed]

- by user34790

I am trying to actually study the signal handling behavior in multiprocess system. I have a system where there are three signal generating processes generating signals of type SIGUSR1 and SIGUSR1. I have two handler processes that handle a particular type of signal. I have another monitoring process that also receives the signals and then does its work. I have a certain issue. Whenever my signal handling processes generate a signal of a particular type, it is sent to the process group so it is received by the signal handling processes as well as the monitoring processes. Whenever the signal handlers of monitoring and signal handling processes are called, I have printed to indicate the signal handling. I was expecting a uniform series of calls for the signal handlers of the monitoring and handling processes. However, looking at the output I could see like at the beginning the monitoring and signal handling processes's signal handlers are called uniformly. However, after I could see like signal handler processes handlers being called in a burst followed by the signal handler of monitoring process being called in a burst. Here is my code and output #include <iostream> #include <sys/types.h> #include <sys/wait.h> #include <sys/time.h> #include <signal.h> #include <cstdio> #include <stdlib.h> #include <sys/ipc.h> #include <sys/shm.h> #define NUM_SENDER_PROCESSES 3 #define NUM_HANDLER_PROCESSES 4 #define NUM_SIGNAL_REPORT 10 #define MAX_SIGNAL_COUNT 100000 using namespace std; volatile int *usrsig1_handler_count; volatile int *usrsig2_handler_count; volatile int *usrsig1_sender_count; volatile int *usrsig2_sender_count; volatile int *lock_1; volatile int *lock_2; volatile int *lock_3; volatile int *lock_4; volatile int *lock_5; volatile int *lock_6; //Used only by the monitoring process volatile int monitor_count; volatile int usrsig1_monitor_count; volatile int usrsig2_monitor_count; double time_1[NUM_SIGNAL_REPORT]; double time_2[NUM_SIGNAL_REPORT]; //Used only by the main process int total_signal_count; //For shared memory int shmid; const int shareSize = sizeof(int) * (10); double timestamp() { struct timeval tp; gettimeofday(&tp, NULL); return (double)tp.tv_sec + tp.tv_usec / 1000000.; } pid_t senders[NUM_SENDER_PROCESSES]; pid_t handlers[NUM_HANDLER_PROCESSES]; pid_t reporter; void signal_catcher_1(int); void signal_catcher_2(int); void signal_catcher_int(int); void signal_catcher_monitor(int); void signal_catcher_main(int); void terminate_processes() { //Kill the child processes int status; cout << "Time up terminating the child processes" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); //Wait for the child processes to finish for(int i=0; i<NUM_SENDER_PROCESSES; i++) { waitpid(senders[i], &status, 0); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { waitpid(handlers[i], &status, 0); } waitpid(reporter, &status, 0); } int main(int argc, char *argv[]) { if(argc != 2) { cout << "Required parameters missing. " << endl; cout << "Option 1 = 1 which means run for 30 seconds" << endl; cout << "Option 2 = 2 which means run until 100000 signals" << endl; exit(0); } int option = atoi(argv[1]); pid_t pid; if(option == 2) { if(signal(SIGUSR1, signal_catcher_main) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, signal_catcher_main) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } if(signal(SIGINT, signal_catcher_int) == SIG_ERR) { perror("3"); exit(1); } /////////////////////////////////////////////////////////////////////////////////////// ////////////////////// Initializing the shared memory ///////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////// cout << "Initializing the shared memory" << endl; if ((shmid=shmget(IPC_PRIVATE,shareSize,IPC_CREAT|0660))< 0) { perror("shmget fail"); exit(1); } usrsig1_handler_count = (int *) shmat(shmid, NULL, 0); usrsig2_handler_count = usrsig1_handler_count + 1; usrsig1_sender_count = usrsig2_handler_count + 1; usrsig2_sender_count = usrsig1_sender_count + 1; lock_1 = usrsig2_sender_count + 1; lock_2 = lock_1 + 1; lock_3 = lock_2 + 1; lock_4 = lock_3 + 1; lock_5 = lock_4 + 1; lock_6 = lock_5 + 1; //Initialize them to be zero *usrsig1_handler_count = 0; *usrsig2_handler_count = 0; *usrsig1_sender_count = 0; *usrsig2_sender_count = 0; *lock_1 = 0; *lock_2 = 0; *lock_3 = 0; *lock_4 = 0; *lock_5 = 0; *lock_6 = 0; cout << "End of initializing the shared memory" << endl; ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////// End of initializing the shared memory /////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////Registering the signal handlers/////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal handlers" << endl; for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { if((pid = fork()) == 0) { if(i%2 == 0) { struct sigaction action; action.sa_handler = signal_catcher_1; sigset_t block_mask; action.sa_flags = 0; sigaction(SIGUSR1,&action,NULL); if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1 ,SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } struct sigaction action; action.sa_handler = signal_catcher_2; action.sa_flags = 0; sigaction(SIGUSR2,&action,NULL); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { //cout << "Registerd the handler " << pid << endl; handlers[i] = pid; } } cout << "End of registering the signal handlers" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////End of registering the signal handlers ////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// ///////////////////////////Registering the monitoring process ////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the monitoring process" << endl; if((pid = fork()) == 0) { struct sigaction action; action.sa_handler = signal_catcher_monitor; sigemptyset(&action.sa_mask); sigset_t block_mask; sigemptyset(&block_mask); sigaddset(&block_mask,SIGUSR1); sigaddset(&block_mask,SIGUSR2); action.sa_flags = 0; action.sa_mask = block_mask; sigaction(SIGUSR1,&action,NULL); sigaction(SIGUSR2,&action,NULL); if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { cout << "Monitor's pid is " << pid << endl; reporter = pid; } cout << "End of registering the monitoring process" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////End of registering the monitoring process//////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Sleep to make sure that the monitor and handler processes are well initialized and ready to handle signals sleep(5); ////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////Registering the signal generators/////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal generators" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { if((pid = fork()) == 0) { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } srand(i); while(true) { int signal_id = rand()%2 + 1; if(signal_id == 1) { killpg(getpgid(getpid()), SIGUSR1); while(__sync_lock_test_and_set(lock_4,1) != 0) { } (*usrsig1_sender_count)++; *lock_4 = 0; } else { killpg(getpgid(getpid()), SIGUSR2); while(__sync_lock_test_and_set(lock_5,1) != 0) { } (*usrsig2_sender_count)++; *lock_5=0; } int r = rand()%10 + 1; double s = (double)r/100; sleep(s); } exit(0); } else { //cout << "Registered the sender " << pid << endl; senders[i] = pid; } } //cout << "End of registering the signal generators" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////End of registering the signal generators/////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Either sleep for 30 seconds and terminate the program or if the number of signals generated reaches 10000, terminate the program if(option = 1) { sleep(90); terminate_processes(); } else { while(true) { if(total_signal_count >= MAX_SIGNAL_COUNT) { terminate_processes(); } else { sleep(0.001); } } } } void signal_catcher_1(int the_sig) { while(__sync_lock_test_and_set(lock_1,1) != 0) { } (*usrsig1_handler_count) = (*usrsig1_handler_count) + 1; cout << "Signal Handler 1 " << *usrsig1_handler_count << endl; __sync_lock_release(lock_1); } void signal_catcher_2(int the_sig) { while(__sync_lock_test_and_set(lock_2,1) != 0) { } (*usrsig2_handler_count) = (*usrsig2_handler_count) + 1; __sync_lock_release(lock_2); } void signal_catcher_main(int the_sig) { while(__sync_lock_test_and_set(lock_6,1) != 0) { } total_signal_count++; *lock_6 = 0; } void signal_catcher_int(int the_sig) { for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); exit(3); } void signal_catcher_monitor(int the_sig) { cout << "Monitoring process " << *usrsig1_handler_count << endl; } Here is the initial segment of output Monitoring process 0 Monitoring process 0 Monitoring process 0 Monitoring process 0 Signal Handler 1 1 Monitoring process 2 Signal Handler 1 2 Signal Handler 1 3 Signal Handler 1 4 Monitoring process 4 Monitoring process Signal Handler 1 6 Signal Handler 1 7 Monitoring process 7 Monitoring process 8 Monitoring process 8 Signal Handler 1 9 Monitoring process 9 Monitoring process 9 Monitoring process 10 Signal Handler 1 11 Monitoring process 11 Monitoring process 12 Signal Handler 1 13 Signal Handler 1 14 Signal Handler 1 15 Signal Handler 1 16 Signal Handler 1 17 Signal Handler 1 18 Monitoring process 19 Signal Handler 1 20 Monitoring process 20 Signal Handler 1 21 Monitoring process 21 Monitoring process 21 Monitoring process 22 Monitoring process 22 Monitoring process 23 Signal Handler 1 24 Signal Handler 1 25 Monitoring process 25 Signal Handler 1 27 Signal Handler 1 28 Signal Handler 1 29 Here is the segment when the signal handler processes signal handlers are called in a burst Signal Handler 1 456 Signal Handler 1 457 Signal Handler 1 458 Signal Handler 1 459 Signal Handler 1 460 Signal Handler 1 461 Signal Handler 1 462 Signal Handler 1 463 Signal Handler 1 464 Signal Handler 1 465 Signal Handler 1 466 Signal Handler 1 467 Signal Handler 1 468 Signal Handler 1 469 Signal Handler 1 470 Signal Handler 1 471 Signal Handler 1 472 Signal Handler 1 473 Signal Handler 1 474 Signal Handler 1 475 Signal Handler 1 476 Signal Handler 1 477 Signal Handler 1 478 Signal Handler 1 479 Signal Handler 1 480 Signal Handler 1 481 Signal Handler 1 482 Signal Handler 1 483 Signal Handler 1 484 Signal Handler 1 485 Signal Handler 1 486 Signal Handler 1 487 Signal Handler 1 488 Signal Handler 1 489 Signal Handler 1 490 Signal Handler 1 491 Signal Handler 1 492 Signal Handler 1 493 Signal Handler 1 494 Signal Handler 1 495 Signal Handler 1 496 Signal Handler 1 497 Signal Handler 1 498 Signal Handler 1 499 Signal Handler 1 500 Signal Handler 1 501 Signal Handler 1 502 Signal Handler 1 503 Signal Handler 1 504 Signal Handler 1 505 Signal Handler 1 506 Here is the segment when the monitoring processes signal handlers are called in a burst Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Why isn't it uniform afterwards. Why are they called in a burst?

Read the article

How to disable Center Key (CK) and let only Left Soft Key (LSK) be used in j2me

- by awaghad-ashish

Hello everyone, I created a custom item in which I need to use the Center Key for the purpose of selecting and I am successfully able to use it with the keyPressed event using the keyCode as -5. The problem is, as soon as I press the CK, it also clicks on the command above the LSK and that causes the menu to pop up. Is there any way that I can disable the CK for a particular command or something like that (because I dont need CK, since I can click on the command through LSK as well, I want to use the CK specifically for the custom item)? Any kind of help will be appreciated, Thanks and regards, Ashish.

Read the article

How to center Label vertical and horizontal in draw2d Figure ?

- by aphex

I have the following situation: Label label = new Label(); label.setText("bla"); RoundedRectangle fig = new RoundedRectangle(); fig.add(label); FlowLayout layout = new FlowLayout(); layout.setStretchMinorAxis(true); fig.setLayoutManager(layout); fig.setOpaque(true); That works only to center the label vertical or horizontal by using layout.setHorizontal(true/false); , but not together. Any idea how to make it work ?

Read the article

Gallery items become off-center when switching into landscape orientation.

- by Sandile

Hey Guys, Thanks for your time. I'm writing an application for android 2.2 and I'm using a gallery to circulate through a list of images that the user can then click to navigate other portions of the application. In portrait orientation, everything is kosher: the images are displaying correctly (completely in the center of the screen as I intended); however, in landscape orientation, all the images in the gallery are strangely displaced a fixed distance to the left of the center of the screen. I've been researching this issue for hours now and haven't found a solution. I'm hoping that some android guru can aid me in the resolution of this bizarre rendering issue. MainMenuActivity.java relevant code snippet (the activity in which the gallery resides) Gallery optionList = (Gallery)findViewById(R.id.mainMenuOptionList); GalleryItem[] optionListItemIdArray = new GalleryItem[] { new GalleryItem(R.drawable.icon_main_menu_option_list_blackboard, "Start Next Lesson", "Start the next planned vocab lesson."), new GalleryItem(R.drawable.icon_main_menu_option_list_index_cards, "Review Words", "Manually look over old words."), new GalleryItem(R.drawable.icon_main_menu_option_list_dice, "Play Vocab Games", "Play games to reinforce knowledge."), new GalleryItem(R.drawable.icon_main_menu_option_list_calendar, "View Lesson Plan", "View the schedule for coming lessons."), new GalleryItem(R.drawable.icon_main_menu_option_list_pie_chart, "View Performance Report", "Evaluate your overall performance statistics."), new GalleryItem(R.drawable.icon_main_menu_option_list_settings, "Manage Settings", "Change and modify application settings.") }; optionList.setAdapter(new GalleryImageAdapter(this, optionListItemIdArray)); NOTE: A GalleryItem is a POJO with an image resource id, title and description. GalleryImageAdapter.java: public class GalleryImageAdapter extends BaseAdapter { private Context context; private GalleryItem[] galleryItemArray; public GalleryImageAdapter(Context context, GalleryItem[] galleryItemArray) { this.context = context; this.galleryItemArray = galleryItemArray; } @Override public int getCount() { return galleryItemArray.length; } @Override public Object getItem(int position) { return position; } @Override public long getItemId(int position) { return position; } @Override public View getView(int position, View convertView, ViewGroup parent) { ImageView imageView = new ImageView(context); imageView.setImageResource(galleryItemArray[position].getImageId()); imageView.setScaleType(ImageView.ScaleType.FIT_START); imageView.setLayoutParams(new Gallery.LayoutParams(Gallery.LayoutParams.WRAP_CONTENT, Gallery.LayoutParams.WRAP_CONTENT)); return imageView; } } Portrait version of main_menu.xml <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mainMenuLinearLayout" android:background="#3067a8" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <TextView android:id="@+id/mainMenuHeadingTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:paddingLeft="10dip" android:textColor="#ffffff" android:textSize="50sp" android:text="@string/main_menu_heading" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> <TextView android:id="@+id/mainMenuSubHeadingTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:paddingLeft="15dip" android:textColor="#ffffff" android:textSize="15sp" android:text="@string/main_menu_sub_heading" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> <Gallery xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mainMenuOptionList" android:layout_width="fill_parent" android:layout_height="wrap_content" android:paddingTop="20dip" android:paddingBottom="10dip" android:spacing="40dip" /> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mainMenuOptionListDetailLinearLayout" android:gravity="center_vertical|center_horizontal" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <TextView android:id="@+id/mainMenuOptionListLabelTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:textColor="#ffffff" android:textSize="25sp" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> <TextView android:id="@+id/mainMenuOptionListDescriptionTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:textColor="#ffffff" android:textSize="15sp" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> </LinearLayout> </LinearLayout> Landscape version of main_menu.xml <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mainMenuLinearLayout" android:background="#3067a8" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <TextView android:id="@+id/mainMenuHeadingTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:paddingLeft="10dip" android:textColor="#ffffff" android:textSize="50sp" android:text="@string/main_menu_heading" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> <TextView android:id="@+id/mainMenuSubHeadingTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:paddingLeft="15dip" android:textColor="#ffffff" android:textSize="15sp" android:text="@string/main_menu_sub_heading" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> <Gallery xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mainMenuOptionList" android:layout_width="fill_parent" android:layout_height="128dip" android:paddingLeft="0dip" android:paddingTop="5dip" android:spacing="10dip" /> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/mainMenuOptionListDetailLinearLayout" android:gravity="center_vertical|center_horizontal" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <TextView android:id="@+id/mainMenuOptionListLabelTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:textColor="#ffffff" android:textSize="25sp" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> <TextView android:id="@+id/mainMenuOptionListDescriptionTextView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:textColor="#ffffff" android:textSize="15sp" android:shadowColor="#555555" android:shadowDx="0" android:shadowDy="0" android:shadowRadius="2" /> </LinearLayout> </LinearLayout> Thank you for your time!

Read the article

How to center horizontally the contents of the open file in vim?

- by Andrea Spadaccini

how do I make vim horizontally center the text of the open file? I don't want to modify the file, just to change the way vim displays it. To be more clear, when I open a file I currently have this situation: |<------ textwidth=80 ------->|<-------------- padding -------------->| |lorem ipsum dolor sit amet.. |dsdsda da dsa dsa What I'd like to have is the following: |<--- padding/2 --->|<------ textwidth=80 ------->|<--- padding/2 --->| | lorem ipsum dolor sit amet.. | dsdsda da dsa dsa Of course, for every value of textwidth and padding.

Read the article

What's a good place to unregister an observer from the notification center?

- by mystify

When I add an observer to the default notification center, where would I unregister that? Example: I have a UIView subclass which lives inside a view controller. That subclass is an observer for the FooBarNotification. If this notification is posted, that view will get it. But now, the view controller decides to throw away the view. Is the best place the -dealloc method of the view itself? Are there any rules like memory management rules? For example: Must I unregister an observer where I registered it? i.e. the view registers itself in it's init method, so it should unregister itself in it's -dealloc method? (not talking about push notifications, but NSNotificationCenter)

Read the article

How to rotate MXML component round its center like a wheel respectfully to mouse?

- by Ole Jak

So I have that panel or any other mxml component. I want somehow to rotate it around like a wheel of a car with which you drive it... loke a Racing wheel... sow like when mousebutton is down it captures pont of component... when you move mouse component rotates (not moves) according to new mouse position... How to rotate MXML component round its center like a wheel respectfully to mouse? welll feel free to edit this question because I know Ive formulated it in a bad way...

Read the article

CSS: Is it possible to have a 3-column layout with BOTH the left column and center column flexibly filling the space?

- by Steven Lu

It is possible to use position:absolute and left and right on the middle column to set where it ends in relation to the parent div. However I'd like to be able to have the left side of the center div to start right where the left column ends, and for the left column to be adjustable (based on its content). This seems like a really basic thing but from what I understand there is no way to do this without flexboxes. Is this true? Is there nothing I could do with clever nesting of semantically superfluous elements and certain styles set to auto?

Read the article

Dell Management Packs in System Center Operations Manager 2007 R2?

- by bwerks

Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

Read the article

Handling HTTP 404 Error in ASP.NET Web API

- by imran_ku07

Introduction: Building modern HTTP/RESTful/RPC services has become very easy with the new ASP.NET Web API framework. Using ASP.NET Web API framework, you can create HTTP services which can be accessed from browsers, machines, mobile devices and other clients. Developing HTTP services is now become more easy for ASP.NET MVC developer becasue ASP.NET Web API is now included in ASP.NET MVC. In addition to developing HTTP services, it is also important to return meaningful response to client if a resource(uri) not found(HTTP 404) for a reason(for example, mistyped resource uri). It is also important to make this response centralized so you can configure all of 'HTTP 404 Not Found' resource at one place. In this article, I will show you how to handle 'HTTP 404 Not Found' at one place. Description: Let's say that you are developing a HTTP RESTful application using ASP.NET Web API framework. In this application you need to handle HTTP 404 errors in a centralized location. From ASP.NET Web API point of you, you need to handle these situations, No route matched. Route is matched but no {controller} has been found on route. No type with {controller} name has been found. No matching action method found in the selected controller due to no action method start with the request HTTP method verb or no action method with IActionHttpMethodProviderRoute implemented attribute found or no method with {action} name found or no method with the matching {action} name found. Now, let create a ErrorController with Handle404 action method. This action method will be used in all of the above cases for sending HTTP 404 response message to the client. public class ErrorController : ApiController { [HttpGet, HttpPost, HttpPut, HttpDelete, HttpHead, HttpOptions, AcceptVerbs("PATCH")] public HttpResponseMessage Handle404() { var responseMessage = new HttpResponseMessage(HttpStatusCode.NotFound); responseMessage.ReasonPhrase = "The requested resource is not found"; return responseMessage; } } You can easily change the above action method to send some other specific HTTP 404 error response. If a client of your HTTP service send a request to a resource(uri) and no route matched with this uri on server then you can route the request to the above Handle404 method using a custom route. Put this route at the very bottom of route configuration, routes.MapHttpRoute( name: "Error404", routeTemplate: "{*url}", defaults: new { controller = "Error", action = "Handle404" } ); Now you need handle the case when there is no {controller} in the matching route or when there is no type with {controller} name found. You can easily handle this case and route the request to the above Handle404 method using a custom IHttpControllerSelector. Here is the definition of a custom IHttpControllerSelector, public class HttpNotFoundAwareDefaultHttpControllerSelector : DefaultHttpControllerSelector { public HttpNotFoundAwareDefaultHttpControllerSelector(HttpConfiguration configuration) : base(configuration) { } public override HttpControllerDescriptor SelectController(HttpRequestMessage request) { HttpControllerDescriptor decriptor = null; try { decriptor = base.SelectController(request); } catch (HttpResponseException ex) { var code = ex.Response.StatusCode; if (code != HttpStatusCode.NotFound) throw; var routeValues = request.GetRouteData().Values; routeValues["controller"] = "Error"; routeValues["action"] = "Handle404"; decriptor = base.SelectController(request); } return decriptor; } } Next, it is also required to pass the request to the above Handle404 method if no matching action method found in the selected controller due to the reason discussed above. This situation can also be easily handled through a custom IHttpActionSelector. Here is the source of custom IHttpActionSelector, public class HttpNotFoundAwareControllerActionSelector : ApiControllerActionSelector { public HttpNotFoundAwareControllerActionSelector() { } public override HttpActionDescriptor SelectAction(HttpControllerContext controllerContext) { HttpActionDescriptor decriptor = null; try { decriptor = base.SelectAction(controllerContext); } catch (HttpResponseException ex) { var code = ex.Response.StatusCode; if (code != HttpStatusCode.NotFound && code != HttpStatusCode.MethodNotAllowed) throw; var routeData = controllerContext.RouteData; routeData.Values["action"] = "Handle404"; IHttpController httpController = new ErrorController(); controllerContext.Controller = httpController; controllerContext.ControllerDescriptor = new HttpControllerDescriptor(controllerContext.Configuration, "Error", httpController.GetType()); decriptor = base.SelectAction(controllerContext); } return decriptor; } } Finally, we need to register the custom IHttpControllerSelector and IHttpActionSelector. Open global.asax.cs file and add these lines, configuration.Services.Replace(typeof(IHttpControllerSelector), new HttpNotFoundAwareDefaultHttpControllerSelector(configuration)); configuration.Services.Replace(typeof(IHttpActionSelector), new HttpNotFoundAwareControllerActionSelector()); Summary: In addition to building an application for HTTP services, it is also important to send meaningful centralized information in response when something goes wrong, for example 'HTTP 404 Not Found' error. In this article, I showed you how to handle 'HTTP 404 Not Found' error in a centralized location. Hopefully you will enjoy this article too.

Read the article

My Code Kata–A Solution Kata

- by Glav

There are many developers and coders out there who like to do code Kata’s to keep their coding ability up to scratch and to practice their skills. I think it is a good idea. While I like the concept, I find them dead boring and of minimal purpose. Yes, they serve to hone your skills but that’s about it. They are often quite abstract, in that they usually focus on a small problem set requiring specific solutions. It is fair enough as that is how they are designed but again, I find them quite boring. What I personally like to do is go for something a little larger and a little more fun. It takes a little more time and is not as easily executed as a kata though, but it services the same purposes from a practice perspective and allows me to continue to solve some problems that are not directly part of the initial goal. This means I can cover a broader learning range and have a bit more fun. If I am lucky, sometimes they even end up being useful tools. With that in mind, I thought I’d share my current ‘kata’. It is not really a code kata as it is too big. I prefer to think of it as a ‘solution kata’. The code is on bitbucket here. What I wanted to do was create a kind of simplistic virtual world where I can create a player, or a class, stuff it into the world, and see if it survives, and can navigate its way to the exit. Requirements were pretty simple: Must be able to define a map to describe the world using simple X,Y co-ordinates. Z co-ordinates as well if you feel like getting clever. Should have the concept of entrances, exists, solid blocks, and potentially other materials (again if you want to get clever). A coder should be able to easily write a class which will act as an inhabitant of the world. An inhabitant will receive stimulus from the world in the form of surrounding environment and be able to make a decision on action which it passes back to the ‘world’ for processing. At a minimum, an inhabitant will have sight and speed characteristics which determine how far they can ‘see’ in the world, and how fast they can move. Coders who write a really bad ‘inhabitant’ should not adversely affect the rest of world. Should allow multiple inhabitants in the world. So that was the solution I set out to act as a practice solution and a little bit of fun. It had some interesting problems to solve and I figured, if it turned out ok, I could potentially use this as a ‘developer test’ for interviews. Ask a potential coder to write a class for an inhabitant. Show the coder the map they will navigate, but also mention that we will use their code to navigate a map they have not yet seen and a little more complex. I have been playing with solution for a short time now and have it working in basic concepts. Below is a screen shot using a very basic console visualiser that shows the map, boundaries, blocks, entrance, exit and players/inhabitants. The yellow asterisks ‘*’ are the players, green ‘O’ the entrance, purple ‘^’ the exit, maroon/browny ‘#’ are solid blocks. The players can move around at different speeds, knock into each others, and make directional movement decisions based on what they see and who is around them. It has been quite fun to write and it is also quite fun to develop different players to inject into the world. The code below shows a really simple implementation of an inhabitant that can work out what to do based on stimulus from the world. It is pretty simple and just tries to move in some direction if there is nothing blocking the path. public class TestPlayer:LivingEntity { public TestPlayer() { Name = "Beta Boy"; LifeKey = Guid.NewGuid(); } public override ActionResult DecideActionToPerform(EcoDev.Core.Common.Actions.ActionContext actionContext) { try { var action = new MovementAction(); // move forward if we can if (actionContext.Position.ForwardFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.ForwardFacingPositions[0])) { action.DirectionToMove = MovementDirection.Forward; return action; } } if (actionContext.Position.LeftFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.LeftFacingPositions[0])) { action.DirectionToMove = MovementDirection.Left; return action; } } if (actionContext.Position.RearFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RearFacingPositions[0])) { action.DirectionToMove = MovementDirection.Back; return action; } } if (actionContext.Position.RightFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RightFacingPositions[0])) { action.DirectionToMove = MovementDirection.Right; return action; } } return action; } catch (Exception ex) { World.WriteDebugInformation("Player: "+ Name, string.Format("Player Generated exception: {0}",ex.Message)); throw ex; } } private bool CheckAccessibilityOfMapBlock(MapBlock block) { if (block == null || block.Accessibility == MapBlockAccessibility.AllowEntry || block.Accessibility == MapBlockAccessibility.AllowExit || block.Accessibility == MapBlockAccessibility.AllowPotentialEntry) { return true; } return false; } } It is simple and it seems to work well. The world implementation itself decides the stimulus context that is passed to he inhabitant to make an action decision. All movement is carried out on separate threads and timed appropriately to be as fair as possible and to cater for additional skills such as speed, and eventually maybe stamina, strength, with actions like fighting. It is pretty fun to make up random maps and see how your inhabitant does. You can download the code from here. Along the way I have played with parallel extensions to make the compute intensive stuff spread across all cores, had to heavily factor in visibility of methods and properties so design of classes was paramount, work out movement algorithms that play fairly in the world and properly favour the players with higher abilities, as well as a host of other issues. So that is my ‘solution kata’. If I keep going with it, I may develop a web interface for it where people can upload assemblies and watch their player within a web browser visualiser and maybe even a map designer. What do you do to keep the fires burning?

Read the article

rhythmbox plugin code for hot key not working

- by Bunny Rabbit

def activate(self,shell): self.shell = shell self.copy_selected() self.action = gtk.Action ('foo','bar','baz',None) self.activate_id = self.action.connect ('activate', self.call_bk_fn,self.shell) self.action_group = gtk.ActionGroup ('hot_key_action_group') self.action_group.add_action_with_accel (self.action, "<control>E") uim = shell.get_ui_manager () uim.insert_action_group (self.action_group, 0) uim.ensure_update () def call_bk_fn(): print('hello world') i am using the above code in a plugin for rhythmbox ,and here i am trying to register the key ctr+e so that the call_bk_fn gets called whenever the key combination is pressed , but its not working why is that so ?

Read the article

Removing Menu Items from Window Tabs

- by Geertjan

So you're working on your NetBeans Platform application and you notice that when you right-click on tabs in the predefined windows, e.g., the Projects window, you see a long list of popup menus. For whatever the reason is, you decide you don't want those popup menus. You right-click the application and go to the Branding dialog. There you uncheck the checkboxes that are unchecked below: As you can see above, you've removed three features, all of them related to closing the windows in your application. Therefore, "Close" and "Close Group" are now gone from the list of popup menus: But that's not enough. You also don't want the popup menus that relate to maximizing and minimizing the predefined windows, so you uncheck those checkboxes that relate to that: And, hey, now they're gone too: Next, you decide to remove the feature for floating, i.e., undocking the windows from the main window: And now they're gone too: However, even when you uncheck all the remaining checkboxes, as shown here... You're still left with those last few pesky popup menu items that just will not go away no matter what you do: The reason for the above? Those actions are hardcoded into the action list, which is a bug. Until it is fixed, here's a handy workaround: Set an implementation dependency on "Core - Windows" (core.window). That is, set a dependency and then specify that it is an implementation dependency, i.e., that you'll be using an internal class, not one of the official APIs. In one of your existing modules, or in a new one, make sure you have (in addition to the above) a dependency on Lookup API and Window System API. And then, add the class below to the module: import javax.swing.Action; import org.netbeans.core.windows.actions.ActionsFactory; import org.openide.util.lookup.ServiceProvider; import org.openide.windows.Mode; import org.openide.windows.TopComponent; @ServiceProvider(service = ActionsFactory.class) public class EmptyActionsFactory extends ActionsFactory { @Override public Action[] createPopupActions(TopComponent tc, Action[] actions) { return new Action[]{}; } @Override public Action[] createPopupActions(Mode mode, Action[] actions) { return new Action[]{}; } } Hurray. Farewell to superfluous popup menu items on your window tabs. In the screenshot below, the tab of the Projects window is being right-clicked and no popup menu items are shown, which is true for all the other windows, those that are predefined as well as those that you add afterwards:

Read the article

XenServer/Center: Shared SRs for hosts not in same pool?

- by 3molo

I would like to use the same SRs on XenServer hosts that are not able to be part of the same pool (because of not having the exact same cpu feature set, if I understand it correctly) in order to share templates, being able to (manually) start a host on another node, backing up running hosts on other hardware etc etc. The technology for SR can be any of iSCSI, NFS or CIFS, iSCSI would obviously be preferred. Trying to add an iSCSI volume renders a "This LUN is already in use as SR iSCSI - Shared Storage on pool xxxxxx.". Adding a NFS share on one XS host, creating a template there and then checking another XS host reveals they don't agree on used space etc. Coming from a vSphere world this is quite baffling, but if these are limitations then I will have to rethink some of the concepts for this low budget project.

Read the article

OpenGL ES 2 jittery camera movement

- by user16547

First of all, I am aware that there's no camera in OpenGL (ES 2), but from my understanding proper manipulation of the projection matrix can simulate the concept of a camera. What I'm trying to do is make my camera follow my character. My game is 2D, btw. I think the principle is the following (take Super Mario Bros or Doodle Jump as reference - actually I'm trying to replicate the mechanics of the latter): when the caracter goes beyond the center of the screen (in the positive axis/direction), update the camera to be centred on the character. Else keep the camera still. I did accomplish that, however the camera movement is noticeably jittery and I ran out of ideas how to make it smoother. First of all, my game loop (following this article): private int TICKS_PER_SECOND = 30; private int SKIP_TICKS = 1000 / TICKS_PER_SECOND; private int MAX_FRAMESKIP = 5; @Override public void run() { loops = 0; if(firstLoop) { nextGameTick = SystemClock.elapsedRealtime(); firstLoop = false; } while(SystemClock.elapsedRealtime() > nextGameTick && loops < MAX_FRAMESKIP) { step(); nextGameTick += SKIP_TICKS; loops++; } interpolation = ( SystemClock.elapsedRealtime() + SKIP_TICKS - nextGameTick ) / (float)SKIP_TICKS; draw(); } And the following code deals with moving the camera. I was unsure whether to place it in step() or draw(), but it doesn't make a difference to my problem at the moment, as I tried both and neither seemed to fix it. center just represents the y coordinate of the centre of the screen at any time. Initially it is 0. The camera object is my own custom "camera" which basically is a class that just manipulates the view and projection matrices. if(character.getVerticalSpeed() >= 0) { //only update camera if going up float[] projectionMatrix = camera.getProjectionMatrix(); if( character.getY() > center) { center += character.getVerticalSpeed(); cameraBottom = center + camera.getBottom(); cameraTop = center + camera.getTop(); Matrix.orthoM(projectionMatrix, 0, camera.getLeft(), camera.getRight(), center + camera.getBottom(), center + camera.getTop(), camera.getNear(), camera.getFar()); } } Any thought about what I should try or what I am doing wrong? Update 1: I think I updated every value you can see on screen to check whether the jittery movement is affected by that, but nothing changed, so something must be fundamentally flawed with my approach/calculations.

Read the article

Key Promoter for NetBeans

- by Geertjan

Whenever a menu item or toolbar button is clicked, it would be handy if NetBeans were to tell you 'hey, did you know, you can actually do this via the following keyboard shortcut', if a keyboard shortcut exists for the invoked action. After all, ultimately, a lot of developers would like to do everything with the keyboard and a key promoter feature of this kind is a helpful tool in learning the keyboard shortcuts related to the menu items and toolbar buttons you're clicking with your mouse. Above, you see the balloon message that appears for each menu item and toolbar button that you click and, below, you can see a list of all the actions that have been logged in the Notifications window. That happens automatically when an action is invoked (assuming the plugin described in this blog entry is installed), showing the display name of the action, together with the keyboard shortcut, which is presented as a hyperlink which, when clicked, re-invokes the action (which might not always be relevant, especially for context-sensitive actions, though for others it is quite useful, e.g., reopen the New Project wizard). And here's all the code. Notice that I'm hooking into the 'uigestures' functionality, which was suggested by Tim Boudreau, and I have added my own handler, which was suggested by Jaroslav Tulach, which gets a specific parameter from each new log entry handled by the 'org.netbeans.ui.actions' logger, makes sure that the parameter actually is an action, and then gets the relevant info from the action, if the relevant info exists: @OnShowingpublic class Startable implements Runnable { @Override public void run() { Logger logger = Logger.getLogger("org.netbeans.ui.actions"); logger.addHandler(new StreamHandler() { @Override public void publish(LogRecord record) { Object[] parameters = record.getParameters(); if (parameters[2] instanceof Action) { Action a = (Action) parameters[2]; JMenuItem menu = new JMenuItem(); Mnemonics.setLocalizedText( menu, a.getValue(Action.NAME).toString()); String name = menu.getText(); if (a.getValue(Action.ACCELERATOR_KEY) != null) { String accelerator = a.getValue(Action.ACCELERATOR_KEY).toString(); NotificationDisplayer.getDefault().notify( name, new ImageIcon("/org/nb/kp/car.png"), accelerator, new ActionListener() { @Override public void actionPerformed(ActionEvent e) { a.actionPerformed(e); } }); } } } }); }} Indeed, inspired by the Key Promoter in IntelliJ IDEA. Interested in trying it out? If there's interest in it, I'll put it in the NetBeans Plugin Portal.

Search Results

Search found 16906 results on 677 pages for 'action center'.

Page 76/677 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83 | Next Page >

- by jax

- by nick

- by Guilherme Cardoso

- by dan.mcclary

- by Blade

- by Gerculy Robert

- by Chadddada

- by SeanMcAlinden

- by mmj

- by user34790

- by awaghad-ashish

- by aphex

- by Sandile

- by Andrea Spadaccini

- by mystify

- by Ole Jak

- by Steven Lu

- by bwerks

- by imran_ku07

- by Glav

- by Bunny Rabbit

- by Geertjan

- by 3molo

- by user16547

- by Geertjan

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83 | Next Page >