Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 76/1359 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Why do people use programming books?

    - by Alex Hope O'Connor
    I find that when someone asks what is the best way to learn how to program, people usually provide them with references to a bunch texts written by various authors. However I don't believe many people at all learn to program from books? I find that they are usually faced with a challenge and then use programming as tool to overcome it. For example I 'got into' programming because I wanted to start a server for a game I was playing, so I googled and read through the support for that particular server and now I am a employed software engineer, using only the skills I developed (and then further developed) by coding C# scripts for a not very popular server package. So my question is, do people generally find it easier to learn from these books? I know I have looked at a few of them and found them far too 'dry' to encourage me to finish it.

    Read the article

  • HDMI sound gone, can't figure out how to turn it back on

    - by Oli
    I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

    Read the article

  • Unity 3D coding language, C# or JavaScript [on hold]

    - by hemantchhabra
    Hello to the gaming community. I am a budding game designer, learning to code for the first time in my life. I did learned c++ in school, 8 years back, so I sort of understand the logic when people are doing coding and I can suggest them the right route also, but to an extent I can't code. I am beginning to learn coding for Unity 3D. Which one do you suggest is more versatile and easier to work on for future, because I am a game designer not a coder, I would do coding until I don't have anyone else to code for me. It should be easy and fast to learn, functional and universal to apply, and innovative at the same time. C# or JavaScript ? Thank you for your time Ps- if you could suggest me steps to learn and tutorials to look for, that would be just awesome.

    Read the article

  • Managing Your First SharePoint Project or Team

    - by Mark Rackley
    (*editor’s note* If you have proper SharePoint Training, know the difference between a site and a site collection, and have the utmost respect for the knowledge of your SharePoint team skip this blog and go directly to meetdux.com, do not pass go, do not collect $200… otherwise, please proceed) Dear Mr. or Mrs. I-know-nothing-about-SharePoint-but-hey,-I-have-manager-in-my-title-so-I’ll-tell-you-how-to-your-job, Thank you so much for joining the Acme corporation. We appreciate your eagerness and willingness to jump in and help us accomplish all of our goals here at acme (these roadrunner rockets don’t make themselves). You may have noticed that we have this thing called SharePoint lying around and we have invested some time in money to make it not a complete piece of garbage. So, I thought I’d give you some pointers to help make your stay here enjoyable and productive. Yeah… you don’t really know SharePoint Just because you had a mysite at your last organization or had a SharePoint 2003 team site does NOT mean you comprehend the vastness that is SharePoint. You don’t know what’s going on behind the scenes. You don’t know what should and should not be done. No, we CAN’T just query the SQL database directly. Yes, it really does take that long. No, we can’t do that out-of-the-box. Your experience doesn’t mean as much as you think it means… Yes, I’m aware that you co-created the internet with Al Gore and have been managing projects since I was blowing up GI Joe figures with firecrackers, however SharePoint is not like anything you have worked with before from a management perspective. Please don’t tell us the proper way to do our job or tell us how “you” would do it, and PLEASE don’t utter the words “I used to do some .NET development so let me know if you get stuck and need some guidance.” It MAY be possible for a incredible project manager to manage a SharePoint project and not understand the technology, but if you force your ideas on us or treat us like we don’t really know what we’re doing then you will prove yourself to NOT be one of those types. Oh no you didn’t… Please don’t tell us how you can bring in a group of guys of Kazakhstan to do the project for $20/hr. There are many companies out there who can do some really crappy SharePoint work and we don’t want to be stuck maintaining their junk. Do you know what it means to deploy a solution? Neither do some of those companies out there. However, there are are few AWESOME consulting firms out there but $150/hr is cheap for these guys. Believe me, it’s worth it though. You get what you pay for! Show us some respect We truly do appreciate and value your opinion and experience, but when we tell you something is different in SharePoint don’t be condescending and dismiss OUR experience and opinions. We have spent a lot of time and energy learning a very complicated technology that can open up a world of possibilities when used properly. We just want to make sure it is used properly. It’s not the same as .NET development. It’s not like a regular web application. There’s more going on behind the scenes than you can possibly fathom. Have a little faith in us please and listen when we talk. You may actually learn a thing or two. Take some time to learn the technology There is hope… you don’t have to be totally worthless. Take some time to learn SharePoint. Learn what it is and what it can do. Invest some time in learning our SharePoint environment. What’s our logical architecture and taxonomy? What governance do we have in place? If you just thought “huh?” then yes, I’m talking to you. Sincerely, Your SharePoint Team (This rant is not pointed at any particular organization or person. If you think it’s about you, you are wrong. This is just a general rant based upon things people have told me and things I’ve seen. If you don’t think it applies to you, please move on. If you think you might be guilty of handling your SharePoint team the wrong way, then just please listen, learn, and have a little faith in your team. You all have the same goal in mind. Also, take the time to learn something about SharePoint, you will all be less frustrated with each other.)

    Read the article

  • Live CD has black screen HP DV6

    - by Shaun Killingbeck
    Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

    Read the article

  • How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

    - by CandN
    Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

    Read the article

  • I'm porting my app from iOS to Android: what do I need to know?

    - by kubi
    What pitfalls should I avoid? What Java language paradigms do Objective-C developers consistently misunderstand? I learned to program in Java, but I have worked in nothing but Objective-C for years now. How are the design patterns different between Android and iOS? If you've made the transition yourself, what parts of Android confused you or took you longer to learn than it should have? Is Eclipse the best OS X IDE for Android? For the record, my app is very strongly tied to UIKit and Foundation, so the word "porting" may be a misnomer; I'll actually be completely rewriting it for Android. No code reuse. Also, I'm doing this to learn Android, so I'd rather fail at the port and learn Android than take a shortcut.

    Read the article

  • my probleme about "The installation or removal of a software package failed"

    - by tulipelle
    Recently, when I open Ubuntu software center, it ask me repair package Then I found this message . installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 569135 files and directories currently installed.) Unpacking linux-image-3.5.0-42-generic (from .../linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./boot/vmlinuz-3.5.0-42-generic': No space left on device No apport report written because the error message indicates a disk full error dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb Error in function: dpkg: dependency problems prevent configuration of linux-image-generic-lts-quantal: linux-image-generic-lts-quantal depends on linux-image-3.5.0-42-generic; however: Package linux-image-3.5.0-42-generic is not installed. dpkg: error processing linux-image-generic-lts-quantal (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-lts-quantal: linux-generic-lts-quantal depends on linux-image-generic-lts-quantal; however: Package linux-image-generic-lts-quantal is not configured yet. dpkg: error processing linux-generic-lts-quantal (--configure): dependency problems - leaving unconfigured

    Read the article

  • What is the best C++ interview question?

    - by David Thielen
    If you could ask a C++ programmer one question to measure their C++ skills, what would it be? The question I think is best is: Can you call "delete this;" inside a member function? (I put this as a link so you can think it through first, then go to The Best C++ Interview Question – Ever! to see the correct answer.) I don't ask this because I expect most people to know the answer. If they did it would not be that useful a question. I ask to see if they can work their way to the correct answer and how they do so.

    Read the article

  • Lubuntu wireless issue with Broadcom chipset

    - by Variant Web Solutions
    I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

    Read the article

  • Self Welcoming Post on geekswithblogs.net

    - by OscarRibbeck
    Hello!.As you may notice :), this is my first post on geekswithblogs.com . I  have been using the .Net Framework mainly to develop ASP.NET WebApps for some years now and I am moving from using the .Net Framework 2.0 to using the latest features on the 4.x Frameworks, I am planning to document whenever is possible some of the stuff I learn using this space kindly given by the staff of the site. The feedback I get will also be very important for my progress and my plan is to learn a lot from what you guys can teach me with your comments on here.I also found myself with the necessity of putting somewhere code samples because sometimes when you post on forums the entries get locked and you can't do anything to add relevant details on them. The code will either be explained on its entirety or will be posted on a link that has an explained working sample for you guys to test and learn from.My posts will be in English, and I am an intermediate English speaker/writer so bare with me if it's not perfect sometimes, I am always learning something new though.I hope this get to be a useful resource for anyone interested. Cheers and Happy Coding for everyone!,Oscar

    Read the article

  • How do I become a programmer and not some guy that can type some C?

    - by Phoxxent
    From what I understand, programming has a lot more to it than learning syntax, that it involves an understanding of what happens under-the-hood and even more. Currently, I am just a guy that can pump out a few loops in Python or C and maybe make a small-scope Zork clone as the hight of skill. So, what can I do to become an actual programmer? How can I find out what I need to know and learn it? I know this has been vaguely asked before, but I kind of want an answer of how as opposed to the whats that I have seen. Would it be nice to know how real programmers define being a programmer? yes. Is that going to actually help me (or anyone else) learn what they need to learn? no. (well, maybe.)

    Read the article

  • Problem with OpenGL or Unity, need Gnome fallback mode

    - by William Wind
    This question is in two parts, and I have been searching the web for days to find answers. With no luck I thought I'd drop by and ask for your help. Here goes: 1.) I'm running Ubuntu 13.04 and one day last week Unity suddenly wound't work. After the login screen, I was either faced with an all black and non-responsive screen, or sometimes it booted and I could see my desktop wallpaper (and add and remove icons/folders from the desktop). But there was no menu in the left hand side and no top bar :-( However I could still enter the terminal. I borrowed my dad's laptop and looked for a solution online. About two days later I gave up (I'm still kind of a n00b at Linux) and found a way to install Gnome Fallback, via the terminal. When I used it, I had the same problem. [clue #1] Missing menues. But if I rebooted into Gnome Fallback mode with no effects. It worked. Great! I have used that for some days now, while still trying to fix the original problem with either Unity or OpenGl or whatever went wrong in the first place. With no luck. After giving up on my search for a fix (I know that came out wrong) -- I decided to reinstall Ubuntu 13.04 from a CD. But! After that I was left where I began. When booting into my account, it only shows the desktop wallpaper and the icons. I can click and enter the folders, but not go into the menues. Last time I fixed it with Gnome Fallback mode, because I could enter the terminal and the PC was automatically online, via wireless network. But not this time, I can't get online. So: 1.) How do I via the LiveCD Ubuntu version (the one I'm using right now) install Gnome Fallback unto the harddrive based system? 2.) If impossible. How can I access the wireless Internet via the terminal, so I can install Gnome Fallback, from the "broken" Unity session. 3.) Is there any other things that I should try? Please help me, PS: My GFX-card is an ATI Radeon something and I have install and used the "Redwood" drive (I think its called) for many weeks prior to the shutdown.

    Read the article

  • Best books to start with ASP.NET MVC / C# and Visual Studio [closed]

    - by Goma
    Possible Duplicate: ASP.NET MVC book for absolute beginners Hi guys, finally I have made a decision to go with ASP.NET and C# and I hope I have made the right decision. I would like to ask you, the experts in ASP.NET and C#, could you please tell me where should I start learning and will you recommened me learn ASP.NET or ASP.NET MVC? And what about C#, what is the best book for beginners to learn C#? And by the way, how should I start with SQL Server and SQL,etc? Should I pick up a special book or will I learn it with C#? Cheers.

    Read the article

  • What are the most common stumbling blocks when it comes to learning programming, in order of difficulty?

    - by blueberryfields
    I seem to remember that linked lists, recursion, pointers, and memory management are all good examples of stumbling blocks - places where the aspiring programmer typically ends up spending significant time trying to understand a concept before moving on and improving, and many end up giving up and not improving. I'm looking for a complete/comprehensive list of these types of stumbling blocks, in rough estimated order of difficulty to learn, with the goal of making sure that an educational program for programmers is structured to properly guide students through them Is this information available somewhere? Ideally, the difficulty to learn will be measured in some sort of objective manner (ie, % of students which consistently fail to learn the concept) What sources are most appropriate for obtaining this information?

    Read the article

  • How are components properly instantiated and used in XNA 4.0?

    - by Christopher Horenstein
    I am creating a simple input component to hold on to actions and key states, and a short history of the last ten or so states. The idea is that everything that is interested in input will ask this component for the latest input, and I am wondering where I should create it. I am also wondering how I should create components that are specific to my game objects - I envision them as variables, but then how do their Update/Draw methods get called? What I'm trying to ask is, what are the best practices for adding components to the proper collections? Right now I've added my input component in the main Game class that XNA creates when everything is first initialized, saying something along the lines of this.Components.Add(new InputComponent(this)), which looks a little odd to me, and I'd still want to hang onto that reference so I can ask it things. An answer to my input component's dilemma is great, but also I'm guessing there is a right way to do this in general in XNA.

    Read the article

  • Programming Language vs. Game Engine [on hold]

    - by hunteroatway17
    I understand that this question has been asked multiple times before. I am just asking this quick and simple question. I have been learning programming in C#, Java and C++ for the past 6 months; Just experimenting with each. I think that C++ is the one that I like most. What I would like to know and am wondering about is should I learn a programming language and use a 2D framework like Allegro; Or should I learn Unity and make 2D games in that because it is probably faster and easier. I want to learn something that I can get pretty good at, seeing as I am pursuing a career in indie game development. I also have a programmer's mind set and I am a left brain thinker so learning a language is not a issue. I just want to best and most future proof choice. Thanks.

    Read the article

  • Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

    - by user287602
    Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

    Read the article

  • web services, J2EE, spring, DB integration project ideas- maybe data mining related?

    - by sj88
    Hey guys, I am a graduate CS student (Data mining and machine learning) and have a good exposure to core JAVA (3 years). I have read up a bunch of stuff on Design patterns J2EE Web services( soap and rest) spring and hibernate Java Concurrency - advanced features like Task and Executors. I would now like to do a project combining this stuff (over my free time of corse) to get a better understanding of these things and to kind of make an end to end software (to learn the best design principles etc + svn, maven). Any good project ideas would be really appreciated. I just wanna build this stuff to learn so I dont really mind re-inventing the wheel. Also, anything related to data mining would be an added bonus (fits with my research) but absolutly not necesary (since this project is more to learn to do large scale software developement)

    Read the article

  • Dual-boot computer won't boot without external hard drive

    - by FrankP
    I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

    Read the article

  • What is 'Ubuntu Unity' (for the Desktop)?

    - by Martin
    Ok, so there's the buzz of Canonical (wanting to) switch for new Ubuntu version from the GNOME default desktop to their own Unity shell. (I hope that's accurate.) It seems I can not totally fathom what Unity actually is. For looking at its homepage it currently is firmly targeted at netbooks and the somehow different usage model on these. Is it a classical desktop? -- Taskbar? Shortcuts? Is the difference between Ubuntu(GNOME)+Unity more/less pronounced than the difference between Ubuntu and Kubuntu? Will "my parents" be able to get the interface if they've been using the classical gnome desktop so far? Edit: I would not like to split this up into more specific questions, as What is Unity? is exactly what the people I set up Ubuntu boxes for will ask me if they hear that the newer Ubuntu version is using that instead of the Desktop -- and it might well happen someone phrases it like that :-) I will certainly not give them the link to the HP as the explanation there does not lay out if it is a desktop or something more or something less: (It does not for me - therefore I'm asking here.) Unity is designed for netbooks and related touch-based devices. It includes [...] that makes it fast and easy to access [...] while removing screen elements that are rarely used in mobile and netbook computing. (emphasis mine) -- the explanation there doesn't even mention the desktop-PC! Unity has a vertical task management panel on the left-hand side and a menu panel at the top of the screen. [...] This sounds like a re-themed normal desktop. Clicking on an icon will give the target application focus if it is already running or launch it if it is not already running. If you click the ... Aha. Sounds like Windows 7. ... icon of an application that already has focus, Unity will activate an Expose-style view of all the open windows associated with that application. No clue what that's supposed to be. So it would really be nice if someone could explain for non desktop-design-terms experts what Unity is.

    Read the article

  • Building SANE from git-source produce backend missmatch on 12.04 even if built locally

    - by deinonychusaur
    It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

    Read the article

  • Why bother writing an Windows 8 app?

    - by Dennis Vroegop
    So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

    Read the article

  • Live Webcast: Private Cloud Database Consolidation with Oracle Exadata

    - by kimberly.billings
    Thursday, January 20th, 2011 at 9:00 am PT In this webcast, you'll learn how Oracle Exadata, Oracle Database 11g, and Oracle Real Application Clusters enable you to consolidate multiple applications on clustered server and storage pools to achieve extreme performance and lower your IT costs. You'll also learn how to maximize the efficiencies of private clouds, including: • Multitenancy • Rapid provisioning • Pay-for-use infrastructure Join us for this live Webcast and discover how Oracle Exadata delivers key cloud capabilities, providing elastic database services that can be quickly provisioned on demand. Register today! To learn more about how customers are consolidating on private clouds with Exadata, watch this video about how Commonwealth Bank of Australia consolidated multiple database services, including OLTP applications such as PeopleSoft Financials, onto an Exadata platform for improved performance and resilience and faster time-to-market.

    Read the article

  • What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12

    - by Richard Lefebvre
    There is plenty to SEE for CRM during OpenWorld in San Francisco, September 30 - October 4! Here are some of the sessions in the CRM Track that you might want to consider attending for products you currently own or might consider for the future. I think you'll agree, there is quite a bit of investment going on across Oracle CRM. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. General Session: Oracle Fusion CRM—Improving Sales Effectiveness, Efficiency, and Ease of Use (Session ID: GEN9674) - Oct 2, 11:45 AM - 12:45 PM. Anthony Lye, Senior VP, Oracle leads this general session focused on Oracle Fusion CRM. Oracle Fusion CRM optimizes territories, combines quota management and incentive compensation, integrates sales and marketing, and cleanses and enriches data—all within a single application platform. Oracle Fusion can be configured, changed, and extended at runtime by end users, business managers, IT, and developers. Oracle Fusion CRM can be used from the Web, from a smartphone, from Microsoft Outlook, or from an iPad. Deloitte, sponsor of the CRM Track, will also present key concepts on CRM implementations. Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap (CON9407) - Oct 1, 3:15PM - 4:15PM. In this session, learn how Oracle Fusion CRM enables companies to create better sales plans, generate more quality leads, and achieve higher win rates and find out why customers are adopting Oracle Fusion CRM. Gain a deeper understanding of the unique capabilities only Oracle Fusion CRM provides, and learn how Oracle’s commitment to CRM innovation is driving a wide range of future enhancements. Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM - 11:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Siebel CRM Overview, Strategy, and Roadmap (CON9700) - Oct 1, 12:15PM - 1:15PM. The world’s most complete CRM solution, Oracle’s Siebel CRM helps organizations differentiate their businesses. Come to this session to learn about the Siebel product roadmap and how Oracle is committed to accelerating the pace of innovation and value for its customers on this platform. Additionally, the session covers how Siebel customers can leverage many Oracle assets such as Oracle WebCenter Sites; InQuira, RightNow, and ATG/Endeca applications, and Oracle Policy Automation in conjunction with their current Siebel investments. Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement (CON9750) - Oct 4, 11:15 AM - 12:15 PM. Social is changing the customer experience! Come find out how Oracle can help you know your customers better, encourage brand affinity, and improve collaboration within your ecosystem. This session reviews Oracle’s social media solution and shows how you can discover hidden insights buried in your enterprise and social data. Also learn how Oracle Social Network revolutionizes how enterprise users work, collaborate, and share to achieve successful outcomes. Oracle CRM On Demand Strategy and Roadmap (CON9727) - Oct 1, 10:45AM - 11:45AM. Oracle CRM On Demand is a powerful cloud-based customer relationship management solution. Come to this session to learn directly from Oracle experts about future product plans and hear how Oracle is committed to accelerating the pace of innovation and value to its customers. Knowledge Management Roadmap and Strategy (CON9776) - Oct 1, 12:15PM - 1:15PM. Learn how to harness the knowledge created as a natural byproduct of day-to-day interactions to lower costs and improve customer experience by delivering the right answer at the right time across channels. This session includes an overview of Oracle’s product roadmap and vision for knowledge management for both the Oracle RightNow and Oracle Knowledge (formerly InQuira) product families. Oracle Policy Automation Roadmap: Supercharging the Customer Experience (CON9655) - Oct 1, 12:15PM - 1:15PM. Oracle Policy Automation delivers rapid customer value by streamlining the capture, analysis, and deployment of policies across every facet of the customer experience. This session discusses recent Oracle Policy Automation enhancements for policy analytics; the latest Oracle Policy Automation Connector for Siebel; and planned new capabilities, including availability with the Oracle RightNow product line. There is much more, so stay tuned for more highlights or check out the Content Catalog and search for your areas of interest. 

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >