Search Results

Search found 31562 results on 1263 pages for 'dell mini 10'.

Page 76/1263 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

    - by user37968
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

    - by MIDoubleKO
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • No login prompt displayed after updating Ubuntu 10.04, broken gdm

    - by cliff
    So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

    Read the article

  • Command-line connect to wired network for Ubuntu

    - by Tim
    I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

    Read the article

  • 404 when doing safe-upgrade in lucid 64 box?

    - by Millisami
    Why I see 404 when doing sudo aptitude safe-upgrade in my lucid 64 box? deploy@li167-251:~$ sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following packages will be upgraded: apache2 apache2-mpm-prefork apache2-threaded-dev apache2-utils apache2.2-bin apache2.2-common apt apt-utils base-files binutils bzip2 dpkg dpkg-dev gzip ifupdown krb5-multidev language-pack-en language-pack-en-base language-selector-common libatk1.0-0 libatk1.0-dev libavahi-client3 libavahi-common-data libavahi-common3 libbz2-1.0 libc-bin libc-dev-bin libc6 libc6-dev libc6-i686 libcups2 libfreetype6 libfreetype6-dev libglib2.0-0 libglib2.0-dev libgssapi-krb5-2 libgssrpc4 libgtk2.0-0 libgtk2.0-common libgtk2.0-dev libk5crypto3 libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 libkrb5-3 libkrb5-dev libkrb5support0 libldap-2.4-2 libldap2-dev libmysqlclient-dev libmysqlclient16 libnotify-dev libnotify1 libpam-modules libpam-runtime libpam0g libparted0debian1 libpng12-0 libpng12-dev libpq-dev libpq5 libssl-dev libssl0.9.8 libtiff4 libudev0 libusb-0.1-4 linux-libc-dev mountall mysql-client mysql-client-5.1 mysql-client-core-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1 openssh-client openssh-server openssl parted python-apt sudo tzdata udev upstart ureadahead wget xulrunner-1.9.2 xulrunner-1.9.2-dev The following packages are RECOMMENDED but will NOT be installed: colibri debhelper fakeroot hicolor-icon-theme libatk1.0-data libglib2.0-data libgtk2.0-bin libhtml-template-perl manpages-dev notification-daemon notify-osd ssl-cert xauth xfce4-notifyd 88 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 85.8MB of archives. After unpacking 1712kB will be used. Do you want to continue? [Y/n/?] y Writing extended state information... Done Get:1 http://security.ubuntu.com/ubuntu/ lucid-updates/main libpam-modules 1.1.1-2ubuntu5 [358kB] Get:2 http://security.ubuntu.com/ubuntu/ lucid-updates/main base-files 5.0.0ubuntu20.10.04.2 [70.2kB] Get:3 http://security.ubuntu.com/ubuntu/ lucid-updates/main gzip 1.3.12-9ubuntu1.1 [102kB] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc-bin 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6-i686 2.11.1-0ubuntu7.2 .........

    Read the article

  • how to setup kismet.conf on Ubuntu

    - by Registered User
    I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

    Read the article

  • PHP 5.2 to 5.3 not upgrading, no errors

    - by Webnet
    I'm following this guide: http://atik97.wordpress.com/2010/06/12/how-to-upgrade-to-php-5-3-in-ubuntu-9-10/ I've done all the steps, but it's still showing php 5.2.6 - any ideas? I have also tried -cgi instead of -cli, neither have any effect. update I've tried rebooting the server to see if that would have any effect and unfortunately it didn't update Output of dpkg -l *php*: Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-=============================================-=============================================-========================================================================================================== un libapache2-mod-php4 <none> (no description available) ii libapache2-mod-php5 5.2.6.dfsg.1-3ubuntu4.6 server-side, HTML-embedded scripting language (Apache 2 module) un libapache2-mod-php5filter <none> (no description available) ii php-pear 5.2.6.dfsg.1-3ubuntu4.6 PEAR - PHP Extension and Application Repository un php4-cli <none> (no description available) un php4-dev <none> (no description available) un php4-mysql <none> (no description available) un php4-pear <none> (no description available) ii php5 5.2.6.dfsg.1-3ubuntu4.6 server-side, HTML-embedded scripting language (metapackage) ii php5-cgi 5.2.6.dfsg.1-3ubuntu4.6 server-side, HTML-embedded scripting language (CGI binary) ii php5-cli 5.2.6.dfsg.1-3ubuntu4.6 command-line interpreter for the php5 scripting language ii php5-common 5.2.6.dfsg.1-3ubuntu4.6 Common files for packages built from the php5 source ii php5-curl 5.2.6.dfsg.1-3ubuntu4.6 CURL module for php5 un php5-dev <none> (no description available) ii php5-gd 5.2.6.dfsg.1-3ubuntu4.6 GD module for php5 ii php5-imap 5.2.6-0ubuntu5.1 IMAP module for php5 un php5-json <none> (no description available) ii php5-mcrypt 5.2.6-0ubuntu2 MCrypt module for php5 ii php5-mysql 5.2.6.dfsg.1-3ubuntu4.6 MySQL module for php5 un php5-mysqli <none> (no description available) ii php5-xsl 5.2.6.dfsg.1-3ubuntu4.6 XSL module for php5 un phpapi-20060613+lfs <none> (no description available) ii phpmyadmin 4:3.1.2-1ubuntu0.2 MySQL web administration tool update The following commands and their outputs: grep php53 /etc/apt/sources.list deb http://php53.dotdeb.org stable all deb-src http://php53.dotdeb.org stable all apt-cache search -f "libapache2-mod-php5" http://pastebin.com/XNXdsXYC update I've updated the question with more details on installed packages.

    Read the article

  • No external network on ubuntu 9.10, though dns works..

    - by user29368
    Hi, I have a weird problem I cant solve. I have several computers, two with xubuntu 9.10 One of them, acting as a media server, has stopped to work when it comes to external network.. I can do for example: ping google.com Which gives me an ip adress back, like: name@Media:/etc$ ping google.com PING google.com (66.102.9.147) 56(84) bytes of data. That tells me it reaches the dns?, but I get no response at all... If I ping a local computer all works fine. I can also reach the computer via ssh without any problems. I have always used network manager, but now I uninstalled it and made the settings manually like this: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.52 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 Still no luck. I have no specific settings for this one in my router, and all the other computers, including my win laptop works fine. This is very annoying since I cant even do an update or anything.. ifconfig looks like this: eth0 Link encap:Ethernet HWaddr 00:24:1d:9f:10:89 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::224:1dff:fe9f:1089/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15410 errors:0 dropped:0 overruns:0 frame:0 TX packets:2693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1167398 (1.1 MB) TX bytes:694973 (694.9 KB) Interrupt:27 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2150 errors:0 dropped:0 overruns:0 frame:0 TX packets:2150 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:143456 (143.4 KB) TX bytes:143456 (143.4 KB) route -n like this Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 I do not know where the adress starting with 169.254 comes from.. Could that be a part of the problem? Hoping for some assistance since Im totally stuck here.. /george

    Read the article

  • Mini-ITX board for AM3 Athlon X4 600e processor.

    - by Kamil Zadora
    Hello, I am planning to build a PC to control a robotic platform that I am building (about 50% complete). I need more power than ATOM platform could bring, as the robot will need to do on the fly image processing to work as intended. I was considering using Athlon X4 600e as it is rated 45W Maximum output. Probably underclocked it would go lower than 30-35W. I do not I'am at very long battery life, but the 17Ah, 12V battery should keep it running for few hours. My problem is: motherboard. I am space limited so I am looking for a nice mini-itx AM3 motherboard to match the processor. It is hard to find many tests about power usage of the motherboards itself (for example, when using the same processor on different motherboards, test are usualy done in the opposite matter). Could you provide any motherboard examples or suggest what chipset to look for? Thank you in advance.

    Read the article

  • Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

    - by cnst
    Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

    Read the article

  • minimal gnome classic on a mini.iso ubuntu 12.04

    - by amr
    I installed ubuntu 12.04 from the mini.iso I want the most minimal classic gnome possible, all I ever need is a terminal, wireless connection, chromium and mid-night commander. No video or audio players no office no nautilus and no other applications. How can this be achieved? I also don't want a log in graphical interface like GDM or lightdm , I'll be happy to log in using the command line. Thanks in advance

    Read the article

  • import mini DV films from Samsung digital cam VP-D353 [USB]

    - by bobo
    I tried to import mini DV films from my old video camera VP-D353 and it's not reconised by my lubuntu.( 12.04 ) I tried "DVGRAB" which should work but it doesn't. I Found this tutorial http://www.foscode.com/linux-minidv-usb-video-capture/ But it's just saying "waiting for dv" I don't really know what should I do now. Here what I've got for the camera when I write : sudo lsub Bus 002 Device 013: ID 04e8:120f Samsung Electronics Co., Ltd thanks

    Read the article

  • How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

    - by Marco Mariani
    I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

    Read the article

  • Can a Mac Mini Server and XCode be used for multiple students?

    - by twerdster
    I'm not an administrator but Ive been given the task of finding out whether this is possible. The scenario is like this: At our university we are offering a course in basic iPhone programming for between 4 to 8 groups of students. We have a few iPads, iPods and iPhones but only two Mac Minis. We want to enable the students to work on XCode in the lab (and from home if possible) without buying 8 Mac Minis. Is this possible to do using a Mac Mini Server? If so how would it work if 2 or more groups want to use XCode simultaneously and to debug their programs on devices simultaneously?

    Read the article

  • Rebuilding a Mac Mini (early 2009)

    - by Kelly Jones
    This weekend I decided to rebuild the family’s Mac Mini.  It’s the early 2009 model and I hadn’t done it since we got it in March of 2009.  Even worse, I had done the import data step (or whatever Apple calls it) which brought over all of the data files and apps from our previous Mac.  AND that install goes back to before 2005, as far as I can remember.  SO, to say that “cruft” had built up in the operating system, is probably a bit of an understatement. The rebuild went pretty smoothly, especially since I had a couple of spare hard drives.  I hooked up a spare USB drive and formatted it for use with the Mac.  I then used Carbon Copy to clone the internal hard drive onto the USB drive.  (Carbon Copy is a great little app that I used several years ago and I was happy to see it was not only still around, but updated as well.) Once I had my backup, I shut down the Mac and replaced the internal hard drive.  I had purchased the hard drive last fall to use with my work laptop, but I got a new work laptop (with awesome dual SSDs) so I wasn’t using it anymore.  The replacement drive (Seagate Momentus 7200.4 ST9500420AS 500GB 7200 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive) has more than double the original’s capacity and is also faster.  I’ll have to keep an eye on the temperature, since that 7200 drive will run hotter. Opening the Mac Mini is not for the easily intimidated!  That cool little case is quite the pain to open.  Luckily, OWC put a video together here.  After replacing the drive, I then installed a clean copy of OS 10.5 using the DVDs that came with the Mac.  After the OS, it was time to reinstall the apps.  I downloaded some of the freeware, just to make sure I had the latest versions.  For the rest, I just copied from the backup cloned drive to the new drive.  (I love the way most Mac apps are written – with almost everything contained within a “package” that I can just copy from one drive to another.  MUCH better than the Windows way of using shared DLLs and the registry to store critical pieces that the app needs in order to run!) The whole process took longer than I would have preferred, but it was long overdue.  It definitely “feels” faster, especially boot time and application launches.

    Read the article

  • Recommended readings for a sofware construction mini-course [on hold]

    - by Aivar
    I'm going to organize a mini-course for CS students who have completed CS1 (Python) and CS2 (Java). I'd like to show them more principled approach to programming practice and design, something along the lines of McConnel's Code Complete. If I had enough copies of Code Complete, I would assign some readings from that book. Can you recommend some freely available material (books, blog posts, articles, essays) for such a course? (I'd prefer to avoid topics specific to OOP and focus on more universal principles.)

    Read the article

  • When to Choose a Mini Site

    Mini sites are websites that contain very few pages; usually only one to three. These include the landing page (main page), a thank you page (for when the customer makes a purchase), and perhaps an about page (where they can find ways to get in touch with you, or find more information about you, or the website).

    Read the article

  • Detecting source of memory usage on a Linux box

    - by apeace
    I have a toy Linux box with 256mb RAM running Ubuntu 10.04.1 LTS. Here is the output of free -m: total used free shared buffers cached Mem: 245 122 122 0 19 64 -/+ buffers/cache: 38 206 Swap: 511 0 511 Unless I'm reading this wrong, 122mb is being used and only 84mb of that is disk cache. Here are all processes I'm running sorted by memory usage (ps -eo pmem,pcpu,rss,vsize,args | sort -k 1 -r): %MEM %CPU RSS VSZ COMMAND 5.0 0.0 12648 633140 node /home/node/main/sites.js 1.5 0.0 3884 251736 /usr/sbin/console-kit-daemon --no-daemon 1.3 0.0 3328 77108 sshd: apeace [priv] 0.9 0.0 2344 19624 -bash 0.7 0.0 1776 23620 /sbin/init 0.6 0.0 1624 77108 sshd: apeace@pts/0 0.6 0.0 1544 9940 redis-server /etc/redis/redis.conf 0.6 0.0 1524 25848 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 103:105 0.5 0.0 1324 119880 rsyslogd -c4 0.4 0.0 1084 49308 /usr/sbin/sshd 0.4 0.0 1028 44376 /usr/sbin/exim4 -bd -q30m 0.3 0.0 904 6876 ps -eo pmem,pcpu,rss,vsize,args 0.3 0.0 888 21124 cron 0.3 0.0 868 23472 dbus-daemon --system --fork 0.2 0.0 732 19624 -bash 0.2 0.0 628 6128 /sbin/getty -8 38400 tty1 0.2 0.0 628 16952 upstart-udev-bridge --daemon 0.2 0.0 564 16800 udevd --daemon 0.2 0.0 552 16796 udevd --daemon 0.2 0.0 548 16796 udevd --daemon 0.0 0.0 0 0 [xenwatch] 0.0 0.0 0 0 [xenbus] 0.0 0.0 0 0 [sync_supers] 0.0 0.0 0 0 [netns] 0.0 0.0 0 0 [migration/3] 0.0 0.0 0 0 [migration/2] 0.0 0.0 0 0 [migration/1] 0.0 0.0 0 0 [migration/0] 0.0 0.0 0 0 [kthreadd] 0.0 0.0 0 0 [kswapd0] 0.0 0.0 0 0 [kstriped] 0.0 0.0 0 0 [ksoftirqd/3] 0.0 0.0 0 0 [ksoftirqd/2] 0.0 0.0 0 0 [ksoftirqd/1] 0.0 0.0 0 0 [ksoftirqd/0] 0.0 0.0 0 0 [ksnapd] 0.0 0.0 0 0 [kseriod] 0.0 0.0 0 0 [kjournald] 0.0 0.0 0 0 [khvcd] 0.0 0.0 0 0 [khelper] 0.0 0.0 0 0 [kblockd/3] 0.0 0.0 0 0 [kblockd/2] 0.0 0.0 0 0 [kblockd/1] 0.0 0.0 0 0 [kblockd/0] 0.0 0.0 0 0 [flush-202:1] 0.0 0.0 0 0 [events/3] 0.0 0.0 0 0 [events/2] 0.0 0.0 0 0 [events/1] 0.0 0.0 0 0 [events/0] 0.0 0.0 0 0 [crypto/3] 0.0 0.0 0 0 [crypto/2] 0.0 0.0 0 0 [crypto/1] 0.0 0.0 0 0 [crypto/0] 0.0 0.0 0 0 [cpuset] 0.0 0.0 0 0 [bdi-default] 0.0 0.0 0 0 [async/mgr] 0.0 0.0 0 0 [aio/3] 0.0 0.0 0 0 [aio/2] 0.0 0.0 0 0 [aio/1] 0.0 0.0 0 0 [aio/0] Now, I know that ps is not the best for viewing process memory usage, but that's because it tends to report more memory than is actually being used...meaning no matter how you look at it all my processes combined shouldn't be using near 122mb, even if you account for the disk cache. What's more, memory usage is growing all the time. I've had to restart my server once a week, because once my 256mb fills up it starts swapping, which it wouldn't do just for disk cache. Shouldn't there be some way for me to see the culprit?! I'm new to server admin, so please if there's something obvious I'm overlooking point it out to me. Just for good measure, the output of cat /proc/meminfo: MemTotal: 251140 kB MemFree: 124604 kB Buffers: 20536 kB Cached: 66136 kB SwapCached: 0 kB Active: 65004 kB Inactive: 37576 kB Active(anon): 15932 kB Inactive(anon): 164 kB Active(file): 49072 kB Inactive(file): 37412 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 524284 kB SwapFree: 524284 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 15916 kB Mapped: 10668 kB Shmem: 188 kB Slab: 18604 kB SReclaimable: 10088 kB SUnreclaim: 8516 kB KernelStack: 536 kB PageTables: 1444 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 649852 kB Committed_AS: 64224 kB VmallocTotal: 34359738367 kB VmallocUsed: 752 kB VmallocChunk: 34359737600 kB DirectMap4k: 262144 kB DirectMap2M: 0 kB EDIT: I had misinterpreted the meaning of free -m at first. But even so: the important thing is that my OS eventually begins to use swap memory if I don't restart my server, which disk caching wouldn't do. So where do I look to see what is using all this memory?

    Read the article

  • Installation error on Ubuntu 11.10

    - by Abhishek Chanda
    I upgraded to Ubuntu 11.10 and now, when I try to install or uninstall a software, I get this error installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 158945 files and directories currently installed.) Removing aisleriot ... Processing triggers for gconf2 ... Processing triggers for man-db ... Processing triggers for hicolor-icon-theme ... Processing triggers for libglib2.0-0 ... Processing triggers for gnome-menus ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up flashplugin-downloader (11.0.1.152ubuntu1) ... Downloading... --2012-05-02 18:47:29-- http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.0.1.152.orig.tar.gz Resolving archive.canonical.com... 91.189.92.150, 91.189.92.191 Connecting to archive.canonical.com|91.189.92.150|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-05-02 18:47:29 ERROR 404: Not Found. download failed The Flash plugin is NOT installed. dpkg: error processing flashplugin-downloader (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of flashplugin-installer: flashplugin-installer depends on flashplugin-downloader (>= 11.0.1.152ubuntu1); however: Package flashplugin-downloader is not configured yet. dpkg: error processing flashplugin-installer (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: flashplugin-downloader flashplugin-installer Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up flashplugin-downloader (11.0.1.152ubuntu1) ... Downloading... --2012-05-02 18:47:33-- http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.0.1.152.orig.tar.gz Resolving archive.canonical.com... 91.189.92.191, 91.189.92.150 Connecting to archive.canonical.com|91.189.92.191|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-05-02 18:47:34 ERROR 404: Not Found. download failed The Flash plugin is NOT installed. dpkg: error processing flashplugin-downloader (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of flashplugin-installer: flashplugin-installer depends on flashplugin-downloader (>= 11.0.1.152ubuntu1); however: Package flashplugin-downloader is not configured yet. dpkg: error processing flashplugin-installer (--configure): dependency problems - leaving unconfigured This seems to be a bug that has been reported.Does anyone know a workaround?

    Read the article

  • How to install Delorme StreetAtlas (any version) + GPS inside VirtualBox VM?

    - by hotei
    When I try to run the install program I get a popup message that says the installer program is not a valid executable. Background: I want a GPS with maps on my laptop running Ubuntu 10.4LTS. Unfortunately I can't find a decent native Linux GPS solution with 50 state US street level coverage. I have VirtualBox VMs available for WinXP and Win7 (among others). The VMs work fine with MicroSoft Streets and Trips (2010) and MapNGo 5 (a very! old Delorme product), but while both these products support GPS, they don't support the Earthmate LT-40 USB GPS I already have. I've got pretty much every Delorme Street Atlas they've released in the last decade and none of them will install in a VM. Any help would be much appreciated. Clarification: I've installed the Delorme products from these CDs before and the disks are fine - as long as installation is done on a "physical" machine. Added: I've tried install from an iso as well as the real CD. No difference in result (setup.exe is not a valid executable) The WinXP is SP-2 (held back on purpose at this point - I'll snapshot and fork a later SP to test). The Win2K is SP-6a. Win7(32) VM is whatever updates came out last week. The USB setup is working at least to the point where the GPS device is active in the device list (has an x in the box). At this point its not relevant because the program that needs to read it can't even be installed. Added 9-19: Added wine as harrymc suggested. Initial result was no change. Here's wines error message. The file '/media/Disk1/setup.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit. At first I thought the execute bit was the problem, but looking at several other windows CDs I see that the execute bit is not set on their exe files (which install to VM without error). Still it was worth a shot so I copied the StreetAtlas 9 DVD to my hard disk, changed the on-disk exe files to have the execute bit set and tried to install again. This time the install via wine got me through the installation process. When I start the program it bombs immediately, so we haven't made much real progress so far. I very much prefer the VM solution to wine, so I'm going back to that for now. To recap the VM situation, using an updated XP with SP3 and all recommended hotfixes: StreetAtlas 2009 USA fails with "not marked as executable". StreetAtlas 2007 USA fails with "not marked as executable". StreetAtlas 9 (copyright 2001) fails with "not marked as executable". SteeetAtlas (copyright 1991) fails with "not marked as executable" Delorme Topo 4 (copyright 2002) fails with "not marked as executable". Just about ready to give up. So I switched from XP VM to Win7 VM and tried StreetAtlas 2009 again. This time it installs. Earthmate USB GPS works. WTH? I feel like the monkey who just wrote a line of Shakespear. I'm smiling because it worked, but I have no clue why. I'm awarding the bounty to harrymc because wine did give some useful insight into the problem and a +1 to goyiux as thanks for helping.

    Read the article

  • CodePlex Daily Summary for Sunday, November 04, 2012

    CodePlex Daily Summary for Sunday, November 04, 2012Popular ReleasesZXMAK2: Version 2.6.8.4: fix tape autostop & tape iconProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...Access 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.2: Release 0.0.2 Created two new users. One belongs to the Administrators group and the other to the Public group. User: admin Pass: admin User: guest Pass: guest Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...mangopollo: Mangopollo 1.1: New classes : CycleTileData, IconicTileData, FlipTileData to mimic Windows Phone 8 API,BCF.Net: BCF.Net: BCF.Net-20121024 source codeAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...DirectX Tool Kit: October 30, 2012 (add WP8 support): October 30, 2012 Added project files for Windows Phone 8MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes NEW: Added Support for the phun.org forum FIXED: Kitty-Kats new Forum UrlLiberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesNew ProjectsAzure Storage Extensions For Storage Client V2.0: This library add LINQ syntax to the method Where on TableQuery<T> This support actually Windows Azure Storage Library V2.0BekkGitTfsDemo: A demo project for a speech on git-tfs.Booky: Booky is a utility bookmarking service which allows you to manage, share and find bookmarks to ultimately store bookmarks online for later use.BSA.Net: BSA.Net bzureC# to C++/CX Converter: Gives you the power of C++ at a cost of the simplicity of C#.Cloud Clipboard Sync: Share the clipboard content via cloud (ex. Dropbox).CricketDataMining: Btech Project on Cricket Data MiningCthulhu Invaders: Estudy project about design patternsDALHelper: Connect to your SQL Server database easily, efficiently, writing minimal code. Dwarf Fortress 2010 Backup Assistant: (Inspired by Minecraft Backup Assistant - http://minecraftbackup.codeplex.com/) Allows quick and easy backup/management of your DF savegames. Planned Features: * Rename saves and autosaves * Backup to zip/7-zip with metadata * Restore backupsInmobiliaria: Proyecto de nosotrosInventário com Código de Barras para Windows CE / Mobile: Aplicativo para inventário de produtos com código de barras. Executa em coletores de dados Windows CE ou Mobile.JQuery MVC in ASP.Net WebForms: The purpose of this project is to try and strip back a lot of the "bloat" in asp.net, use jquery and to build effective MVC in to WebFormsMar3ek's Download Manager 2: Mar3ek's Download Manager 2 - a simple, yet powerful, download manager for windows.Martian Shrimp: A small, simple and modular game making framework for modern browsers.MOJ: Moj is program created to help users organize and browse their virtual movie colectionNetFluid Starter Kit: NetFluid sample collection. Including : - Wallen garden controller - JSON RPC - Background thread web page - Dynamic image generation www.netfluid.orgO Library: The O Library is a SQL Framework to use with SQL Server 2008 & 2012 that enables developer to add a .Net feeling to their T-SQL code.Scanner With WIA2.0: warp implement WIA 2.0 with c#Simplify Workflow: A set of custom activities and templates extending Windows Workflow Foundation to simplify the development process for BPM or Workflow application.T4 C# Constructor Generator: T4 C# Constructor Generator is a T4 template for Visual Studio C# projects that lowers the overhead of the C# compiler by generating constructors.Unity.Mvc.Wcf: Removes the cross-cutting concern of managing WCF service clients used by your MVC controllers.WorkflowCode - Workflow in a Code framework: Intended to use by developers. As useful and simple as possible. It is the Workflow framework for a fast and readable code. With samples and tips.XNeon Netmedia Player: A Media Player, Social Networking Notifier and Internet Browser from the Founder of Aza DOSXooFoo: This project intends sharing tools for the XOOPS communityXoops France: Publications Xoops francophones (traductions noyau xoops, documentations, modules françisés, thèmes, plugin smarty, hacks, ...)Yasher (Yet Another Hasher): Compute hash of files or text. Supported algorithms : * MD5 * SHA1 * SHA256 * SHA384 * SHA512 * RIPEMD160

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >