Search Results

Search found 2073 results on 83 pages for 'digital agenda'.

Page 76/83 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• Windows Server 2008 R2 bare metal restore to different hardware

  - by S Falken

  Scenario: I have a Windows Server 2008 R2 x64 installation whose main disk drive is now 7 years old and showing signs of age. For the last couple of months it's been displaying increased errors and requirements to run checkdisk. I have successfully created a bare metal restore (BMR) image on a separate data drive on the server, which can be seen from the Windows Recovery console; I tested it by booting to and using the Windows Server installation DVD's recovery utilities. The BMR image includes the system drive with boot partition, system state, and the D:\ drive of the server, which is where I have followed the practice of installing any program that does not require a C:\ installation path. Therefore, the BMR includes both the C:\ and D:\ drives, system state and boot partition. The C:\ drive is a 7-year old Seagate 160GB. The D:\ drive is a rather newer 120GB Western Digital. I have purchased a 128GB solid state Samsung 830 that I want to restore these partitions to, using the BMR. Questions: In the above-referenced article, Microsoft seems to be indicating that I am only able to restore to like-kind hardware, which doesn't help at all and is difficult to believe. Is this really true? I've cleaned these drives up and minimized the size of partition they require. C:\ will need about a 70GB partition, and the data on D:\ will need about 50GB. Will Windows Server backup allow me to restore the BMR to newly-created partitions on the SSD, discarding extra space? I don't need a "how-to": I just need an "is it possible". Justification: Before posting this question, I checked ServerFault articles with the following titles, but none of them were about this exact scenario: Restore SBS 2008 Backup to Same Hardware but Different Disk Configuration Restoring Windows Server 2008 to different hardware - OEM License Restoring II6 server after a hardware failure windows 2008 r2 fail to restore Domain controller failed to restore using windows backup tools How does restore to dissimilar hardware work? Migrating Windows 2008 R2 from a PC to a different PC TFS 2005 Server restore from one hardware to another I also researched Microsoft but only received an oblique answer which was not precisely aimed at my question, at the following URL: http://support.microsoft.com/kb/249694#method3

  Read the article

• What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

  - by Tyler

  Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• BlueScreens on my ThinkPad with Windows 7 64 Bit and a SSD (CRITICAL_OBJECT_TERMINATION, ntoskernel.exe)

  - by pvorb

  I'm getting BlueScreens about every five days for more than three months. Here's an example: A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe CRITICAL_OBJECT_TERMINATION If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000f4 (0x0000000000000003, 0xfffffa80065f2b30, 0xfffffa80065f2e10, 0xfffff80002f9bf40) *** ntoskrnl.exe - Address 0xfffff80002c98d00 base at 0xfffff80002c19000 DateStamp 0x4d9fdd5b It's has always been the same BlueScreen message showing CRITICAL_OBJECT_TERMINATION, 0x000000f4, and ntoskrnl.exe. Of course the addresses change. My computer is a ThinkPad T400 (about 2 years old) with a SSD in it. I'm also running Windows 7 Professional 64 bit. When I bought my computer, it had a 250GByte SeaGate HDD in it, which I replaced by a 500GByte HDD by Western Digital. Last september I bought a Corsair F120 SSD and replaced the HDD by this SSD. Then I bought a LEICKE HDD adapter for the UltraBay II where I plugged in my 500GByte HDD. This configuration ran about half a year without any errors. After re-installing Windows this spring, I am getting regular BlueScreens. Sometimes my system runs for about 2 weeks without a BSOD, sometimes I get several BlueScreens a day. The only thing that I noticed is, that I'm always running Google Chrome when it happens. Is there anyone who has made his/her own bad experiences whith some of my components or is there anybody who can tell me if it would be helpful to send my notebook to Lenovo? Thank you very much for your help on my issue! Regards, Paul

  Read the article

• Computer randomly reboots during "intensive activity".

  - by Reznor

  My friend has been playing games on his new build for some time now. However, lately, his computer will randomly reboot out of nowhere, so far only happening in game, and presumably only to happen in game as it happens nowhere else. This can happen in game during play or even in the options. Note, it isn't a crash or blue screen. It's just a normal reboot. This started today, I believe, and has only occured in two games: Dead Space and Stalker: Shadow of Chernobyl. He has played a handful of games before these, for about a week or so, without this problem. We theorized on two possibilities: Maybe something is overheating? Maybe the power supply is inadequate? These two were quickly dismissed, as all his components were operating at normal temperatures when he got back to his desktop from the reboot, and we all know these parts don't exactly cool down quickly, especially if they get hot enough to trigger a reboot. Besides, I know at-least my motherboard reports processor overheating at start-up, and requests I press f1 to continue into boot. The PSU one was dismissed too. He has an 850w power supply on a rig that was estimated to take only 720 some watts, that's with some overcompensating to be safe. He opened up his case to make sure nothing was seated wrong or in the way. All was fine, but he did notice a sticker on his video card. It had a giant barcode on it and some numbers. Now, I'm used to seeing these stickers, they're the warranty stickers, right, and removal voids the warranty? Yeah, well, we find it odd because this sticker is slapped right over the circuits of the video card, not on a block or anything. Is this normal? Should he remove it? Right now, I am concerned with the memory. Could that be at fault? Here are his specs: Windows 7 Home Premium, 64-Bit Intel i7 950 EVGA GeForce 570 GTX 4 GB DDR3 PC10666 dual-channel Corsair RAM Corsair 850w PSU Gigabyte GA-X58A-UD3R Western Digital 1 TB WD1001FALS

  Read the article

• Windows 7 immediately disconnects a USB drive

  - by Daniel Saner

  I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Complete Guide to Networking Windows 7 with XP and Vista

  - by Mysticgeek

  Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Geek Fun: Virtualized Old School Windows – Windows 95

  - by Matthew Guay

  Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Geek Fun: Virtualized Old School Windows – Windows 95

  - by Matthew Guay

  Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Ask How-To Geek: Dropbox in the Start Menu, Understanding Symlinks, and Ripping TV Series DVDs

  - by Jason Fitzpatrick

  This week we take a look at how to incorporate Dropbox into your Windows Start Menu, understanding and using symbolic links, and how to rip your TV series DVDs right to unique and high-quality episode files. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Add Drobox to Your Start Menu Dear How-To Geek, I use Dropbox all the time and would like to add it right onto my start menu along side the other major shortcuts like Documents, Pictures, etc. It seems like adding Dropbox into the menu should be part of the Dropbox installation package! Sincerely, Dropboxing in Des Moines Dear Dropboxing, We agree, it would be a nice installation option. As it stands you’re going to have to do a little simple hacking to get Dropbox nestled neatly into your start menu. The hack isn’t super elegant but when you’re done you’ll have the link you want and it’ll look like it was there all along. Check out this step-by-step guide here in order to take an existing Library shortcut and rework it to be a Dropbox link. Understanding and Using Symbolic Links Dear How-To Geek, I was talking to a coworker the other day about an issue I’d been having with a media center application I’m running. He suggested using symbolic links to better organize my media and make it easier for the application to access my collection. I had no idea what he was talking about and never got a chance to bug him about it later. Can you clear up this whole symbolic links business for me? I’ve been using computers for years and I’ve never even heard of it! Sincerely, Symbolic Who? Dear Symbolic, Symbolic links aren’t commonly used by many Windows users which is why you likely haven’t run into the concept. Symbolic links are essentially supercharged shortcuts—the newly introduced Windows library system is really just a type of symbolic link system. You can use symbolic links to do all sorts of neat stuff like link folders to your Dropbox folder, organize media, and more. The concept of symbolic links is pretty simple but the execution can be really tricky. We’d suggest reading over our guide to creating symbolic links in Windows 7, Windows XP, and Ubunutu to get a clearer idea what you’re getting into. Rip Your TV DVDs into Handy Episode Files Dear How-To Geek, My wife got me an iPod for Christmas and I still haven’t got around to filling it up. I have tons of entire TV show seasons on DVD and would like to get them on the iPod but I have absolutely no idea where to start. How do I get the shows off the discs? I thought it would be as easy to import the TV shows into iTunes as it is to import tracks off a CD but I was totally wrong. I tried downloading some applications to rip them but those didn’t work at all. Very frustrating! Surely there is an easy and/or automated way to do this, right? Sincerely, Free My DVDs Dear DVDs, Oh man is this a frustration we can relate to. It’s inordinately difficult to get movies and TV shows off physical media and into digital (and portable media player-friendly) formats. There are a multitude of ways to rip DVDs and quite a few applications out there (some good, some mediocre, and some outright malware). We’d recommend a two-part punch to solve your ripping woes. You’ll need a copy of DVDFab to strip away the protections on the discs and rip the disc and Handbrake to load the disc image and convert the files. It’s not quite as smooth as the CD-to-iTunes workflow but it’s still pretty easy. Check out all the steps and settings you’ll want to toggle here. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup]

  Read the article

• Share a Printer on Your Network from Vista or XP to Windows 7

  - by Mysticgeek

  The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Share a Printer on Your Network from Vista or XP to Windows 7

  - by Mysticgeek

  The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Issue 15: Oracle PartnerNetwork Exchange @ Oracle OpenWorld

  - by rituchhibber

       ORACLE FOCUS Oracle PartnerNetwork Exchange@ ORACLE OpenWorld Sylvie MichouSenior DirectorPartner Marketing & Communications and Strategic Programs RESOURCES -- Oracle OpenWorld 2012 Oracle PartnerNetwork Exchange @ OpenWorld Oracle PartnerNetwork Exchange @ OpenWorld Registration Oracle PartnerNetwork Exchange SpecializationTest Fest Oracle OpenWorld Schedule Builder Oracle OpenWorld Promotional Toolkit for Partners Oracle Partner Events Oracle Partner Webcasts Oracle EMEA Partner News SUBSCRIBE FEEDBACK PREVIOUS ISSUES If you are attending our forthcoming Oracle OpenWorld 2012 conference in San Francisco from 30 September to 4 October, you will discover a new dedicated programme of keynotes and sessions tailored especially for you, our valued partners. Oracle PartnerNetwork Exchange @ OpenWorld has been created to enhance the opportunities for you to learn from and network with Oracle executives and experts. The programme also provides more informal opportunities than ever throughout the week to meet up with the people who are most important to your business: customers, prospects, colleagues and the Oracle EMEA Alliances & Channels management team. Oracle remains fully focused on building the industry's most admired partner ecosystem—which today spans over 25,000 partners. This new OPN Exchange programme offers an exciting change of pace for partners throughout the conference. Now it will be possible to enjoy a fully-integrated, partner-dedicated session schedule throughout the week, as well as key social events such as the Sunday night Welcome Reception, networking lunches from Monday to Thursday at the Howard Street Tent, and a fantastic closing event on the last Thursday afternoon. In addition to the regular Oracle OpenWorld conference schedule, if you have registered for the Oracle PartnerNetwork Exchange @ OpenWorld programme, you will be invited to attend a much anticipated global partner keynote presentation, plus more than 40 conference sessions aimed squarely at what's most important to you, as partners. Prominent topics for discussion will include: Oracle technologies and roadmaps and how they fit with partners' business plans; business development; regional distinctions in business practices; and much more. Each session will provide plenty of food for thought ahead of the numerous networking opportunities throughout the week, encouraging the knowledge exchange with Oracle executives, customers, prospects, and colleagues that will make this conference of even greater value for you. At Oracle we always work closely with our partners to deliver solution offerings that improve business value, simplify the IT experience and drive innovation and efficiencies for joint customers. The most important element of our new OPN Exchange is content that helps you get more from technology investments, more from your peer-to-peer connections, and more from your interactions with customers. To this end we've created some partner-specific tools which can be used by OPN members ahead of the conference itself. Crucially, a comprehensive Content Catalog already lists and organises details of every OPN Exchange session, speaker, exhibitor, demonstration and related materials. This Content Catalog can be used by all our partners to identify interesting content that you can add to your own personalised Oracle OpenWorld Schedule Builder, allowing more effective planning and pre-enrolment for vital sessions. There are numerous highlights that you will definitely want to include in those personal schedules. On Sunday morning, 30 September we will start the week with partner dedicated OPN Exchange sessions, following our Global Partner Keynote at 13:00 with Judson Althoff, SVP, Worldwide Alliances & Channels and Embedded Sales and senior executives, giving insight into Oracle's partner vision, strategy, and resources—all designed to help build and strengthen market opportunities for you. This will be followed by a number of OPN Exchange general sessions, the Oracle OpenWorld Opening Keynote with Larry Ellison, CEO, Oracle and concluded with the OPN Exchange AfterDark Welcome Reception, starting at 19:30 at the Metreon. From Monday 1 to Thursday 4 October, you can attend the OPN Exchange sessions that are most relevant to your business today and over the coming year. Oracle's top product and sales leaders will be on hand to discuss Oracle's strategic direction in 40+ targeted and in-depth sessions focussing on critical success factors to develop your business. Oracle's dedication to innovation, specialization, enablement and engineering provides Oracle partners with a huge opportunity to create new services and solutions, differentiate themselves and deliver extreme value to joint customers across the globe. Oracle will even be helping over 1000 partners to earn OPN Specialization certification during the Oracle OpenWorld OPN Exchange Test Fest, which will be providing all the study materials and exams required to drive Specialization for free at the conference. You simply need to check the list of current certification tracks available, and make sure you pre-register to reserve a seat in one of the ten sessions being offered free to OPN Exchange registered attendees. And finally, let's not forget those all-important networking opportunities, which can so often provide partners with valuable long-term alliances as well as exciting new business leads. The Oracle PartnerNetwork Lounge, located at Moscone South, exhibition hall, room 100 is the place where partners can meet formally or informally with colleagues, customers, prospects, and other industry professionals. OPN Specialized partners with OPN Exchange passes can also visit the OPN Video Blogging room to record and share ideas, and at the OPN Information Station you will find consultants available to answer your questions. "For the first time ever we will have a full partner conference within OpenWorld. OPN Exchange @ OpenWorld will kick-off on the first Sunday and run the entire week. We'll have over 40 sessions throughout that time and partners will hear from our top development executives, with special sessions dedicated to partnering throughout. It's going to be a phenomenal event, and we look forward to seeing our partners there." Judson Althoff, SVP, Oracle Worldwide Alliances & Channels and Embedded Sales So if you haven't done so already, please register for Oracle PartnerNetwork Exchange @ OpenWorld today or add OPN Exchange to your existing registration for just $100 through My Account. And if you have any further questions regarding partner activities at Oracle OpenWorld, please don't hesitate to contact the Oracle PartnerNetwork team at [email protected] will be on hand to share the very latest information about: Oracle's SPARC Superclusters: the latest Engineered Systems from Oracle, delivering radically improved performance, faster deployment and greatly reduced operational costs for mixed database and enterprise application consolidation Oracle's SPARC T4 servers: with the newly developed T4 processor and Oracle Solaris providing up to five times the single threaded performance and better overall system throughput for expanded application versatility Oracle Database Appliance: a new way to take advantage of the world's most popular database, Oracle Database 11g, in a single, easy-to-deploy and manage system. It's a complete package engineered to deliver simple, reliable and affordable database services to small and medium size businesses and departmental systems. All hardware and software components are supported together and offer customers unique pay-as-you-grow software licensing to quickly scale from two to 24 processor cores without incurring the costs and downtime usually associated with hardware upgrades Oracle Exalogic: the world's only integrated cloud machine, featuring server hardware and middleware software engineered together for maximum performance with minimum set-up and operational cost Oracle Exadata Database Machine: the only database machine that provides extreme performance for both data warehousing and online transaction processing (OLTP) applications, making it the ideal platform for consolidating onto grids or private clouds. It is a complete package of servers, storage, networking and software that is massively scalable, secure and redundant Oracle Sun ZFS Storage Appliances: providing enterprise-class NAS performance, price-performance, manageability and TCO by combining third-generation software with high-performance controllers, flash-based caches and disks Oracle Pillar Axiom Quality-of-Service: confidently consolidate storage for multiple applications into a single datacentre storage solution Oracle Solaris 11: delivering secure enterprise cloud deployments with the ability to run hundreds of virtual application with no overhead and co-engineered with other Oracle software products to provide the highest levels of security, manageability and performance Oracle Enterprise Manager 12c: Oracle's integrated enterprise IT management product, providing the industry's only complete, integrated and business-driven enterprise cloud management solution Oracle VM 3.0: the latest release of Oracle's server virtualisation and management solution, helping to move datacentres beyond server consolidation to improve application deployment and management. Register today and ensure your place at the Extreme Performance Tour! Extreme Performance Tour events are free to attend, but places are limited. To make sure that you don't miss out, please visit Oracle's Extreme Performance Tour website, select the city that you'd be interest in attending an event in, and then click on the 'Register Now' button for that city to secure your interest. Each individual city page also contains more in-depth information about your local event, including logistics, agenda and maybe even a preview of VIP guest speakers. -- Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

  Read the article

• Guest Post: Christian Finn: Is Facebook About to Become a Victim of its Own Success?

  - by Michael Snow

  12.00 Print 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Cambria; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;}  Since we have a number of new members of the WebCenter Evangelist team - I thought it would be appropriate to close the week with the newest hire and leader of the global WebCenter Evangelists, Christian Finn, who has just joined the Red team after many years with the small technology company up in Redmond, WA. He gave an intro to himself in an earlier post this morning but his post below is a great example of how customer engagement takes on a life of its own in our global online connected and social digital ecosystem. Is Facebook About to Become a Victim of its Own Success? What if I told you that your brand could advertise so successfully, you wouldn’t have to pay for the ads? A recent campaign by Ford Motor Company for the Ford Focus featuring Doug the spokespuppet (I am not making this up) did just that—and it raises some interesting issues for marketers and social media alike in the brave new world of customer engagement that is the Social Web. Allow me to elaborate. An article in the Wall Street Journal last week—“Big Brands Like Facebook, But They Don’t Like to Pay” tells the story of Ford’s recently concluded online campaign for the 2012 Ford Focus. (Ford, by the way, under the leadership of people such as Scott Monty, has been a pioneer of effective social campaigns.) The centerpiece of the campaign was the aforementioned Doug, who appeared as a character on Facebook in videos and via chat. (If you are not familiar with Doug, you can see him in action here, and read the WSJ story here.) You may be thinking puppet ads are a sign of Internet Bubble 2.0 and want to stop now, but bear with me. The Journal reported that Ford spent about $95M on its overall Ford Focus campaign, with TV accounting for over $60M of that spend. The Internet buy for the campaign was just over $10M, which included ad buys to drive traffic to Facebook for people to meet and ‘Like’ Doug and some amount on Facebook ads, too, to promote Doug and by extension, the Ford Focus. So far, a fairly straightforward consumer marketing story in the Internet Era. Yet here’s the curious thing: once Doug reached 10,000 fans on Facebook, Ford stopped paying for Facebook ads. Doug had gone viral with people sharing his videos with one another; once critical mass was reached there was no need to buy more ads on Facebook. Doug went on to be Liked by over 43,000 people, and 61% of his fans said they would be more likely to consider buying a Focus. According to the article, Ford says Focus sales are up this year—and increasing sales is every marketer’s goal. And so in effect, Ford found its Facebook campaign so successful that it could stop paying for it, instead letting its target consumers communicate its messages for fun—and for free. Not only did they get a 3X increase in fans beyond their paid campaign, they had thousands of customers sharing their messages in video form for months. Since free advertising is the Holy Grail of marketing both old and new-- and it appears social networks have an advantage in generating that buzz—it seems reasonable to ask: what would happen to brands’ advertising strategies—and the media they use to engage customers, if this success were repeated at scale? It seems logical to conclude that, at least initially, more ad dollars would be spent with social networks like Facebook as brands attempt to replicate Ford’s success. Certainly Facebook ad revenues are on the rise—eMarketer expects Facebook’s ad revenues to quintuple by 2012 compared with 2009 levels, to nearly 2.9B. That’s bad news for TV and the already battered print media and good news for Facebook. But perhaps not so over the longer run. With TV buys, you have to keep paying to generate impressions. If Doug the spokespuppet is any guide, however, that may not be true for social media campaigns. After an initial outlay, if a social campaign takes off, the audience will generate more impressions on its own. Thus a social medium like Facebook could be the victim of its own success when it comes to ad revenue. It may be there is an inherent limiting factor in the ad spend they can capture, as exemplified by Ford’s experience with Dough and the Focus. And brands may spend much less overall on advertising, with as good or better results, than they ever have in the past. How will these trends evolve? Can brands create social campaigns that repeat Ford’s formula for the Focus with effective results? Can social networks find ways to capture more spend and overcome their potential tendency to make further spend unnecessary? And will consumers become tired and insulated from social campaigns, much as they have to traditional advertising channels? These are the questions CMOs and Facebook execs alike will be asking themselves in the brave new world of customer engagement. As always, your thoughts and comments are most welcome.

  Read the article

• XNA Notes 004

  - by George Clingerman

  The XNA community has been crazy busy again. It always make me fee like such a slacker collecting all of these notes as I see the tremendous output from people all over the world and it’s incredible and humbling. There are some amazingly skilled people working with XNA. On another not, I’m going to take a minute to get on my soapbox and say, if you are developing ANYTHING and are not using some sort of source/revision control, START IMMEDIATELY. This applies to teams of one. Projects for fun. And “I back up my hard drive” or “I use dropbox!” does NOT count as using source control. You’ll be doing yourself a HUGE favor if you find one, learn to use it and integrate it into your everyday workflow. I personally use Subversion. It’s hosted offsite at xp.dev.com and I use TortoiseSVN as my front end to interface with the repository. It’s simple and easy to use and has saved me from myself so many time. Honestly, get setup with some type of source control immediately. If you don’t understand how, grab another developer that does and have them walk you through setup and the basics of using it. Ok, I’m done. On to the notes… The XNA Team Only 14 days left to Submit XNA GS 3.1 Games! http://blogs.msdn.com/b/xna/archive/2011/01/24/14-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx Shawn Hargreaves shares some great information on Exception Handling best practices on the XNA forums http://forums.create.msdn.com/forums/p/73333/448556.aspx#448556 http://blogs.msdn.com/b/ericlippert/archive/2008/09/10/vexing-exceptions.aspx XNA MVPs @CatalinZima gives us a peek at Chicken’s Can’t Fly http://www.amusedsloth.com/games/chickens-cant-fly/ Screen-space deformations in XNA for WP7 from Catalin Zima http://twitter.com/CatalinZima/statuses/30313083767357440 http://www.amusedsloth.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ XNA Developers Going to GDC? Don’t miss the XNA panel hosted by a plethora of well known XNA community names! http://forums.create.msdn.com/forums/p/73576/448842.aspx#448842 MasterBlud does an interview with @Xalterax http://twitter.com/MasterBlud/statuses/28510774812999680 http://www.xboxhornet.com/wordpress/?p=7102 Luke Schneider of Radiangames posts about The Radiangames Style http://radiangames.com/?p=532 Holmade Games had a “vote for the new playable character” poll going on for Hurdle Turtle this past week http://holmadegames.blogspot.com/2011/01/new-level-pack-vote-for-your-favorite.html IGF v0.1.0.0 release post mortem http://indiefreaks.com/2011/01/24/v0-1-0-0-release-post-mortem/ James an Super Dunner post Good Morning Gato #46 and a look at the Vampire Smile box art http://www.ska-studios.com/2011/01/21/good-morning-gato-46/ http://www.ska-studios.com/2011/01/20/vampire-smiles-digital-box-art/ Alfredo Di Napoli creates Cow Pong using XNA and F#! http://alfredodinapoli.wordpress.com/2011/01/25/cow-pong-a-simple-xna-game-in-f/ Xbox LIVE Indie Games Signed In Podcast posts Episode #61 http://www.signedinpodcast.com/?p=559 Gamergeddon posts the January 23rd edition of XBLIG Round Up http://www.gamergeddon.com/2011/01/23/xbox-indie-games-round-up-january-23rd/ Indie Asylum posts Antipole Review http://www.indieasylum.com/reviews/38-xblig/112-antipole.html 1UPOrPosion Reviews OSR Unhinged http://www.1uporpoison.com/xblig/osr-unhinged/ DarkstarMatryx review Warbirds at Work http://www.darkstarmatryx.com/?p=185 Review of Aban Hawkins and the 1000 Spikes http://www.armlessoctopus.com/2011/01/24/xbox-indie-review-aban-hawkins-the-1000-spikes/ XboxHornet reviews Corrupted http://www.xboxhornet.com/wordpress/?p=7123 XBLIG 2010: The Best And The Worst http://www.gamasutra.com/blogs/JamieMann/20110121/6840/ Xbox LIVE Arcade Sales Analysis - an interesting read for XBLIG developers wondering how they’re doing compared to arcade.. http://www.gamerbytes.com/2011/01/xbla_sales_analysis_dec_2010.php Best of Indies for January 25th http://www.thisisfakediy.co.uk/articles/games/best-of-the-indies-25th-january-2011 Decimation X3 appears as an arcade machine in the wild! http://twitter.com/mdoucette/statuses/29605562484260864 XNA Game Development Guiseppe De Francesco (@PinoEire) announced Torque X 4.0 CEV is now in RC phase! http://www.garagegames.com/community/blogs/view/20779 DrMistry of mstargames shares his struggle (and mistakes) with learning to use the Content Pipeline http://www.mstargames.co.uk/mistryblogmain/35-genblog/181-pontent-cipeline-more-like-it.html New Tutorial posted XNA 2D Basic Collision Detection with Rotation from Ioannis Panagopoulos http://www.progware.org/Blog/post/XNA-2D-Basic-Collision-Detection-with-Rotation.aspx Sgt. Conker roars to life! Doing a much better (and prettier) job of collecting XNA news from around the interwebs. http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/dedication-for-captain-boki/ http://www.sgtconker.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ http://www.sgtconker.com/2011/01/xna-4-0-light-pre-pass-2/ http://www.sgtconker.com/2011/01/indiefreaks-game-framework-0-1-0-0-released/ Offering a little free publicity for XBLIGs http://forums.create.msdn.com/forums/p/73465/448321.aspx#448321 Ben Kane writes about building loot tables from Excel using the Content Pipeline http://benkane.wordpress.com/2011/01/23/building-loot-tables-from-excel-using-the-content-pipeline/ Good tips on attracting a game artist AND an offer to create your cover art for FREE http://forums.create.msdn.com/forums/t/72998.aspx If you’re an XBLIG developer keeping your eye on places to release on the PC, might want to be watching the IndieCity blog. Seems like these guys are well on their way to constructing something worth watching. http://www.indiecity.com/blog/ DVMGames spotted a new crowd-funding site for Indies http://twitter.com/DVMGames/statuses/29947274767372289 http://www.8bitfunding.com/ Transmute continues to make progress and there’s a nice dev blog to follow along here http://forgottenstarstudios.com/blog/

  Read the article

• T-SQL Tuesday #33: Trick Shots: Undocumented, Underdocumented, and Unknown Conspiracies!

  - by Most Valuable Yak (Rob Volk)

  Mike Fal (b | t) is hosting this month's T-SQL Tuesday on Trick Shots.  I love this choice because I've been preoccupied with sneaky/tricky/evil SQL Server stuff for a long time and have been presenting on it for the past year.  Mike's directives were "Show us a cool trick or process you developed…It doesn’t have to be useful", which most of my blogging definitely fits, and "Tell us what you learned from this trick…tell us how it gave you insight in to how SQL Server works", which is definitely a new concept.  I've done a lot of reading and watching on SQL Server Internals and even attended training, but sometimes I need to go explore on my own, using my own tools and techniques.  It's an itch I get every few months, and, well, it sure beats workin'. I've found some people to be intimidated by SQL Server's internals, and I'll admit there are A LOT of internals to keep track of, but there are tons of excellent resources that clearly document most of them, and show how knowing even the basics of internals can dramatically improve your database's performance.  It may seem like rocket science, or even brain surgery, but you don't have to be a genius to understand it. Although being an "evil genius" can help you learn some things they haven't told you about. ;) This blog post isn't a traditional "deep dive" into internals, it's more of an approach to find out how a program works.  It utilizes an extremely handy tool from an even more extremely handy suite of tools, Sysinternals.  I'm not the only one who finds Sysinternals useful for SQL Server: Argenis Fernandez (b | t), Microsoft employee and former T-SQL Tuesday host, has an excellent presentation on how to troubleshoot SQL Server using Sysinternals, and I highly recommend it.  Argenis didn't cover the Strings.exe utility, but I'll be using it to "hack" the SQL Server executable (DLL and EXE) files. Please note that I'm not promoting software piracy or applying these techniques to attack SQL Server via internal knowledge. This is strictly educational and doesn't reveal any proprietary Microsoft information.  And since Argenis works for Microsoft and demonstrated Sysinternals with SQL Server, I'll just let him take the blame for it. :P (The truth is I've used Strings.exe on SQL Server before I ever met Argenis.) Once you download and install Strings.exe you can run it from the command line.  For our purposes we'll want to run this in the Binn folder of your SQL Server instance (I'm referencing SQL Server 2012 RTM): cd "C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn" C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.dll > sqldll.txt C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.exe > sqlexe.txt   I've limited myself to DLLs and EXEs that have "sql" in their names.  There are quite a few more but I haven't examined them in any detail. (Homework assignment for you!) If you run this yourself you'll get 2 text files, one with all the extracted strings from every SQL DLL file, and the other with the SQL EXE strings.  You can open these in Notepad, but you're better off using Notepad++, EditPad, Emacs, Vim or another more powerful text editor, as these will be several megabytes in size. And when you do open it…you'll find…a TON of gibberish.  (If you think that's bad, just try opening the raw DLL or EXE file in Notepad.  And by the way, don't do this in production, or even on a running instance of SQL Server.)  Even if you don't clean up the file, you can still use your editor's search function to find a keyword like "SELECT" or some other item you expect to be there.  As dumb as this sounds, I sometimes spend my lunch break just scanning the raw text for anything interesting.  I'm boring like that. Sometimes though, having these files available can lead to some incredible learning experiences.  For me the most recent time was after reading Joe Sack's post on non-parallel plan reasons.  He mentions a new SQL Server 2012 execution plan element called NonParallelPlanReason, and demonstrates a query that generates "MaxDOPSetToOne".  Joe (formerly on the Microsoft SQL Server product team, so he knows this stuff) mentioned that this new element was not currently documented and tried a few more examples to see what other reasons could be generated. Since I'd already run Strings.exe on the SQL Server DLLs and EXE files, it was easy to run grep/find/findstr for MaxDOPSetToOne on those extracts.  Once I found which files it belonged to (sqlmin.dll) I opened the text to see if the other reasons were listed.  As you can see in my comment on Joe's blog, there were about 20 additional non-parallel reasons.  And while it's not "documentation" of this underdocumented feature, the names are pretty self-explanatory about what can prevent parallel processing. I especially like the ones about cursors – more ammo! - and am curious about the PDW compilation and Cloud DB replication reasons. One reason completely stumped me: NoParallelHekatonPlan.  What the heck is a hekaton?  Google and Wikipedia were vague, and the top results were not in English.  I found one reference to Greek, stating "hekaton" can be translated as "hundredfold"; with a little more Wikipedia-ing this leads to hecto, the prefix for "one hundred" as a unit of measure.  I'm not sure why Microsoft chose hekaton for such a plan name, but having already learned some Greek I figured I might as well dig some more in the DLL text for hekaton.  Here's what I found: hekaton_slow_param_passing Occurs when a Hekaton procedure call dispatch goes to slow parameter passing code path The reason why Hekaton parameter passing code took the slow code path hekaton_slow_param_pass_reason sp_deploy_hekaton_database sp_undeploy_hekaton_database sp_drop_hekaton_database sp_checkpoint_hekaton_database sp_restore_hekaton_database e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\hkproc.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matgen.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matquery.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\sqlmeta.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\resultset.cpp Interesting!  The first 4 entries (in red) mention parameters and "slow code".  Could this be the foundation of the mythical DBCC RUNFASTER command?  Have I been passing my parameters the slow way all this time? And what about those sp_xxxx_hekaton_database procedures (in blue)? Could THEY be the secret to a faster SQL Server? Could they promise a "hundredfold" improvement in performance?  Are these special, super-undocumented DIB (databases in black)? I decided to look in the SQL Server system views for any objects with hekaton in the name, or references to them, in hopes of discovering some new code that would answer all my questions: SELECT name FROM sys.all_objects WHERE name LIKE '%hekaton%' SELECT name FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%hekaton%' Which revealed: name ------------------------ (0 row(s) affected) name ------------------------ sp_createstats sp_recompile sp_updatestats (3 row(s) affected)   Hmm.  Well that didn't find much.  Looks like these procedures are seriously undocumented, unknown, perhaps forbidden knowledge. Maybe a part of some unspeakable evil? (No, I'm not paranoid, I just like mysteries and thought that punching this up with that kind of thing might keep you reading.  I know I'd fall asleep without it.) OK, so let's check out those 3 procedures and see what they reveal when I search for "Hekaton": sp_createstats: -- filter out local temp tables, Hekaton tables, and tables for which current user has no permissions -- Note that OBJECTPROPERTY returns NULL on type="IT" tables, thus we only call it on type='U' tables   OK, that's interesting, let's go looking down a little further: ((@table_type<>'U') or (0 = OBJECTPROPERTY(@table_id, 'TableIsInMemory'))) and -- Hekaton table   Wellllll, that tells us a few new things: There's such a thing as Hekaton tables (UPDATE: I'm not the only one to have found them!) They are not standard user tables and probably not in memory UPDATE: I misinterpreted this because I didn't read all the code when I wrote this blog post. The OBJECTPROPERTY function has an undocumented TableIsInMemory option Let's check out sp_recompile: -- (3) Must not be a Hekaton procedure.   And once again go a little further: if (ObjectProperty(@objid, 'IsExecuted') <> 0 AND ObjectProperty(@objid, 'IsInlineFunction') = 0 AND ObjectProperty(@objid, 'IsView') = 0 AND -- Hekaton procedure cannot be recompiled -- Make them go through schema version bumping branch, which will fail ObjectProperty(@objid, 'ExecIsCompiledProc') = 0)   And now we learn that hekaton procedures also exist, they can't be recompiled, there's a "schema version bumping branch" somewhere, and OBJECTPROPERTY has another undocumented option, ExecIsCompiledProc.  (If you experiment with this you'll find this option returns null, I think it only works when called from a system object.) This is neat! Sadly sp_updatestats doesn't reveal anything new, the comments about hekaton are the same as sp_createstats.  But we've ALSO discovered undocumented features for the OBJECTPROPERTY function, which we can now search for: SELECT name, object_definition(OBJECT_ID) FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%OBJECTPROPERTY(%'   I'll leave that to you as more homework.  I should add that searching the system procedures was recommended long ago by the late, great Ken Henderson, in his Guru's Guide books, as a great way to find undocumented features.  That seems to be really good advice! Now if you're a programmer/hacker, you've probably been drooling over the last 5 entries for hekaton (in green), because these are the names of source code files for SQL Server!  Does this mean we can access the source code for SQL Server?  As The Oracle suggested to Neo, can we return to The Source??? Actually, no. Well, maybe a little bit.  While you won't get the actual source code from the compiled DLL and EXE files, you'll get references to source files, debugging symbols, variables and module names, error messages, and even the startup flags for SQL Server.  And if you search for "DBCC" or "CHECKDB" you'll find a really nice section listing all the DBCC commands, including the undocumented ones.  Granted those are pretty easy to find online, but you may be surprised what those web sites DIDN'T tell you! (And neither will I, go look for yourself!)  And as we saw earlier, you'll also find execution plan elements, query processing rules, and who knows what else.  It's also instructive to see how Microsoft organizes their source directories, how various components (storage engine, query processor, Full Text, AlwaysOn/HADR) are split into smaller modules. There are over 2000 source file references, go do some exploring! So what did we learn?  We can pull strings out of executable files, search them for known items, browse them for unknown items, and use the results to examine internal code to learn even more things about SQL Server.  We've even learned how to use command-line utilities!  We are now 1337 h4X0rz!  (Not really.  I hate that leetspeak crap.) Although, I must confess I might've gone too far with the "conspiracy" part of this post.  I apologize for that, it's just my overactive imagination.  There's really no hidden agenda or conspiracy regarding SQL Server internals.  It's not The Matrix.  It's not like you'd find anything like that in there: Attach Matrix Database DM_MATRIX_COMM_PIPELINES MATRIXXACTPARTICIPANTS dm_matrix_agents   Alright, enough of this paranoid ranting!  Microsoft are not really evil!  It's not like they're The Borg from Star Trek: ALTER FEDERATION DROP ALTER FEDERATION SPLIT DROP FEDERATION   #tsql2sday

  Read the article

• Looking Back at MIX10

  - by WeigeltRo

  It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

  Read the article

• HTG Explains: Why is Printer Ink So Expensive?

  - by Chris Hoffman

  Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

  Read the article

• Building InstallShield based Installers using Team Build 2010

  - by jehan

  Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped  WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list.                                                                                            Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template  to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from  from FileàNewà project àInstallShield Projects. Here, I’m using  InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for  TailSpin application.   Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting.  Once I did above changes, the build got successful.

  Read the article

• doubleTwist is an iTunes Alternative that Supports Several Devices

  - by Mysticgeek

  There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Preview and Purchase Ebooks with Kindle for PC

  - by Matthew Guay

  Want to look over a new book, or buy it immediately in ebook format?  Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store.  The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books.  With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first.  With Kindle for PC, however, you can download a sample of any ebook available for free.  The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview.  Click the Go to Kindle for PC button to open Kindle and read your ebook preview.   Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left.  All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover.  Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it.  Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon.  Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before.  Refresh Kindle for PC, and your new ebook will automatically download.  Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book.  Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks.  Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free.  Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”.  Notice that this book shows it’s price is $0.00, but the button still says Buy now.  Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh.  Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account.  Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this.  If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync.  You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC.  Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

  Read the article

• Who is Jeremiah Owyang?

  - by Michael Hylton

  Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group.  I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara.  Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time:  1) The Dynamic Customer Journey:  Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations.  Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this.  2) One of the sub themes that supports this trend is Social Performance.  Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation.  As you might expect, this comes with upsides and downsides.  3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond.  Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not.  It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond.  In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires.  All of this is being ironically written at 430 am on a Sunday am.  Q: How can people keep up with what you’re working on? J.O.: A great question, thanks.  There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com.  A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang.  As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now.  http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon?  J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast?  J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >