Search Results

Search found 5205 results on 209 pages for 'extra'.

Page 76/209 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Why did my laptop turn off?

    - by darenw
    Normally I can slip my running laptop into a backpack, go somewhere, and if it's no more than about half an hour later, it'll still be running. At the destination I plug in the AC power unit and all is well. I run it off of the AC unit before and after the trip, have the screen at less than full backlight brightness, and don't have any peripherals that burn power. Sometimes the wireless switch accidentally slides in the backpack, and that causes extra power to be used and the laptop dies before I reach the destination. Sad, but so be it. But sometimes the wireless switch is off, I've reached the destination in less than 30 minutes (typically 10-20 min), and I know the battery was fully charged, yet the machine is off. Is there a way to determine, after the fact, why the machine shut itself off? I'm running Linux on a fairly powerful Gateway with 4GB RAM, fancy nvidia graphics, dual core cpu, chosen more for number crunching power than battery life, but should last easily for half an hour if not an hour.

    Read the article

  • Issues with non-HP harddisk in HP ML 350 server?

    - by Torben Warberg Rohde
    I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

    Read the article

  • Why is my USB-to-VGA'd monitor working, but not showing in Display Settings?

    - by Strilanc
    I have a USB-to-VGA adapter, which I use to connect a second monitor to my laptop (totaling 3 screens). It worked alright with Vista. I upgraded to Windows 7, and now it no longer works properly (I downloaded the latest drivers just to get it to work on 7). The extra monitor is detected and used to extend the desktop (I can move things onto it, etc), but is not shown within the Control Panel. This is annoying because now I can't changes its resolution, set its logical position to match its physical position, etc. Can I do anything, besides waiting for better drivers? I'm mainly concerned with moving its logical position. (I'd also like to understand how Windows can use a monitor it can't detect. Weird.)

    Read the article

  • Stripping Non-Text from a Scanned, OCRd PDF

    - by Daniel S.
    I have a PDF created from a scanned document. OCR was used to recognize text. In Acrobat, if I select text, and click 'copy with formatting', I can paste the formatted text into Word, so it seems that fonts and colors are also embedded in the document in addition to just plain text and possibly the size. Is there any way to use this information to create a PDF that just contains the formatted OCRd text, without the scanned image. Currently, my document only shows the scanned image, and the text is on an invisible layer. I would like to create a PDF document that removes the image that was scanned, and displays the formatted text that is currently hidden. The following post has a section on "How can we make the invisible text visible?" PDF has an extra blank in all words after running through Ghostscript However, doing this does not show the correct text formatting (that is retained when pasting in Word), and I also would like to remove the scanned image so that the final PDF just contains formatted (color, font, size) vector fonts, and no images.

    Read the article

  • Azure Linux Virtual Machines Price per Hour, Computation or Running?

    - by Arjun Bajaj
    first of all, I couldn't find a StackExchange site on Cloud Computing. I think this is the most appropriate site, because some of you might be using Azure. So I just wanted to know: The Windows Azure Pricing Page shows Linux Virtual Machine Price as $0.013/hr for an extra small VM. The monthly price comes up to about $10. Is this price charged as number of hours of computation done on the VM or number of hours of running the VM? And if I shutdown the VM, will I be charged anything?

    Read the article

  • How can one select an application to switch to in task switcher with track pad (MacBook Pro, Mac OS

    - by index
    Three finger swipe left/right - Task switcher shows up (a horizontal bar with app symbols). Two finger swipe - highlights an icon and shows app name. ?? - switches to highlighted app. Since the highlighting is independent of the mouse cursor, a click doesn't work here without moving the mouse cursor. But I don't want this (locate mouse cursor, move the extra mile..). Maybe Better Touch Tool allows to configure a click to act as SPACE or RETURN in the task switcher? But how did Apple intend to use this?

    Read the article

  • Windows program to remove titlebar, frame, etc from a window?

    - by Nelson
    I like playing computer games in windowed mode, as opposed to full screen. I don't like staring at the title bar, frame, and other UI junk. I also don't like seeing other stuff on my desktop around the window. Is there a simple Windows program that will strip the UI chrome off of an arbitrary window from some other application? Extra points for an easy way to put a black screen underneath the window, hiding the desktop. Note: I'm looking specifically to handle windows that are smaller than my desktop size. There's a variety of 'windowed maximized' options that make a window exactly the desktop size, and positioned so all the UI decorations are off screen. (E.g.: ShiftWindow). I'm trying to strip all the decorations away from a window that's smaller than desktop size.

    Read the article

  • RHEL kickstart with external DVDrom drive

    - by AndyM
    HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

    Read the article

  • Undeliverable messages to newly migrated Exchange user

    - by johnnyb10
    We are in the process of migrating from our old domain to a new one, part of which involves migrating mailboxes from Exchange 2003 to Exchange 2007. A bunch of users have been migrated already without problems. However, one of the users is having trouble receiving emails from others. When someone sends to him, they get an Undeliverable NDR that says "A configuration error in the e-mail system caused the message to bounce between two servers or to be forwarded between two recipients." The message shows the user's distinguished name as /OU=OurDomain/CN=Recipients/CN=USER57137172. The user's account name should just be "USER", so I don't know where the extra numbers ("57137172") are coming from. Thanks in advance.

    Read the article

  • How to remove $data stream from file in windows 8

    - by chris.w.mclean
    Windows for a while now has added an additional hidden stream to files that were downloaded from the internet. If you attempted to use these files, you'd get all kinds of odd behavior as windows was detecting this additional stream and then preventing the app / exe from getting all sorts of security clearance. But in previous versions of windows you could right click on a file, go to properties then click 'Unblock' which removed the extra stream. Windows 8 seems to be doing the additional streams trick, but I haven't yet found a way to remove them using the win 8 UI. Anyone know how to do this?

    Read the article

  • Need to set mailx variable to specify the From address

    - by user256817
    Running Oracle Linux 5.8 (which is just re-branded RedHat EL 5.8) I must change the From address. But we have scripts that use mailx which cannot be re-written to use any extra flags, so I'd like to use internal variables instead, which I see on the linux.die.net manpage on mailx is an alternative to the -r flag: -r address Sets the From address. Overrides any from variable specified in environment or startup files. Tilde escapes are disabled. The -r address options are passed to the mail transfer agent unless SMTP is used. This option exists for compatibility only; it is recommended to set the from variable directly instead. (Source: http://linux.die.net/man/1/mailx) How can we use these mailx variables? I tried adding this to /root/.mailrc, no go: set [email protected] I also added that to /etc/mail.rc with no gold. So I am turning to you, SuperUsers...

    Read the article

  • Does LDAP fit the role of a user database for an application?

    - by Spredzy
    I (my company) run a webservice that integrates pieces of few entreprisey-level software. Most of them offer different type of authentication but all offers at least LDAP. I was wondering if storing my application users directly in an LDAP directory would be a good idea. This way all the application I am using could rely on it for authentication purpose. I am aware that LDAP is not a database per se, but it is a datastore. I am also aware that there is no kind of constraints thus deleting a user on the LDAP directory won't do anything on my actual data, but this case would be taken care of with an extra process. My main question here is : is there any reason why I shouldn't use LDAP as my users database ?

    Read the article

  • Setting up dual wireless routers

    - by JasCav
    I have two wireless routers (one is the router supplied by Verizon - MI424-WR ActionTek and the other is DD-WRT Buffalo router). I want to set them up so that I have the second router (Buffalo) on its own subnet and two SSIDs so I can put different devices on different routers and so I can put my web server on the first router and put most of my other computers behind the second router for a little extra protection in case of a compromise. From my understanding, I have to hook the two routers together so that the LAN from the Verizon router plugs into the WAN port of the Buffalo router. This is where I get stuck. What settings do I need to look for to setup the Buffalo on its own subnet? Do I need to do anything with the Verizon router, or are the configuration changes done to the Buffalo?

    Read the article

  • What technical reasons exist for not using space characters in file names?

    - by Chris W. Rea
    Somebody I know expressed irritation today regarding those of us who tend not to use spaces in our filenames, e.g. NamingThingsLikeThis.txt -- despite most modern operating systems supporting spaces in filenames. Are there technical reasons that it's still common to see file names without (appropriate) spaces? If so, what are these technical reasons that spaces in filenames are avoided or discouraged, and in what circumstances are they relevant? The most obvious reason I could think of, and why I typically avoid it, are the extra quotes required on the command line when dealing with such files. Are there any other significant technical reasons?

    Read the article

  • What type of SATA cable will I buy?

    - by Mehper C. Palavuzlar
    I've bought a new optical drive. It's a Samsung SH-S223C with SATA connection. Since it is OEM with no box, no cable came with it, so I need two cables now. Since I have an extra SATA power cable, it's OK, but I have to buy the data cable. What type of cable should I buy? If you please give a picture of it besides its type as well, I'll be happy. My motherboard is GigaByte P43-ES3G. TIA.

    Read the article

  • How to stop OS X from switching input method (keyboard layout) automatically?

    - by adolf garlic
    After using the wireless keyboard that comes with the iMac, I have switched to a MS Ergo Natural 4000 one. Surprisingly I had to install extra software as OS X could not work out which keyboard I had. After which I went into sys prefs and set the main input method to be "British - Microsoft" first and "Swiss German" second (what the wireless keyboard is), on the "input sources" tab: However... OS X keeps resetting my input method back to Swiss German which is driving me bananas. I have the flag thingy top right so I can see when this changes. N.B. I have "input source options" set to "use the same one in all documents" which I am assuming means keep the language the same for anything running. It also flips back on the login page. Does anyone know how to fix this?

    Read the article

  • AMD FX 8350 potentially overheating

    - by rhughes
    I am worried that my CPU is overheating when running at maximum capacity. I have not overclocked the machine. The machine often powers down after a couple of minutes of max CPU usage. I get the following events in the Event Log after the crash: Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/10/2013 12:05:40 Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: home-pc Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. What can I do to confirm this or further narrow down this issue? Due to the sudden nature of the crash, no MEMORY.DMP is created I believe. I am happy to post any extra information that is needed.

    Read the article

  • Domain name is forwarding to my localhost, no idea why

    - by Dustin Fineout
    On my local development machine, I have a WAMP setup (Windows Vista Home Premium, Apache 2, MySQL and PHP 5). One of my projects is rehash.dustinfineout.com, which may be related to the problem... For some reason, when I try to visit http://www.rehash.com in a browser, it forwards automatically to 127.0.0.1 loopback/localhost. I discovered this entirely accidentally. I have already looked at the http.conf and extra/httpd-vhosts.conf Apache configuration files and these are not causing it. I also checked the windows hosts file but that had no entries in it either (C:/WINDOWS/System32/drivers/etc/hosts - maybe there is another location I need to check). Any ideas? Just to clarify, rehash.com is NOT my domain.

    Read the article

  • stdout and key press

    - by Jack
    Hi, when in console, if I press a key, some interrupt controller sends code of that key to CPU, which looks into some table and than represent that keypress by printing some charracter to stdout. But, is keyboard sending an ASCII code of that key, or just some standardised code? Since there is so many languages and extra characters, OS must further translate its code into some character according to user selected scheme, I guess. I ask, becouse I am from Czech Republic, and we use some characters that do not exists in standart ASCII code. So I was thinking, if I enter this character into a console, and then print it, lets say in C++ using cin and cout, and I have set locale to Czech, stdin must actually send some non-ASCII code of the character I pressed to input stream. Am I right?

    Read the article

  • Serving Compressed Files Amazon vs Lightty

    - by tike
    We are currently using amazon CloudFront to serve css and according to Amazon itself, Amazon CloudFront can serve both compressed and uncompressed files from an origin server. But while i check compression it shows everything fine in origin server but it shows notcompressed checking in the link with cloudfront. e.g. http://www.port80software.com/tools/compresscheck.asp?url=http%3A%2F%2Fimgsrv.mydomain.com%2Fen-UK%2Fsomething.css it would result with Compression status: (gzip) while with cloudfront http://www.port80software.com/tools/compresscheck.asp?url=http%3A%2F%2hereisit.cloudfront.net%2F%2Fsomething.css Compression status: Uncompressed Origin server is running lighttpd with mod_deflate however, allowed config is: deflate.allowed_encodings = ("bzip2", "gzip", "deflate") [i would think, putting extra allowed encoding wont affect as such.] Here i am clueless, what is the real issue.

    Read the article

  • Split internal USB pinouts - is it possible?

    - by TM
    I've currently got a situation in my PC where I have 3 devices that connect to the motherboard via the onboard USB pinouts. The problem is, I only have two sets of USB pinouts on my motherboard. Is there any way of connecting two devices to one set of pinouts? Essentially, I'm looking for the functionality of a USB hub, but I'd like it to be inside the case, and provide pinouts rather than regular USB ports. Update: I don't need any more USB ports, I have devices that use the USB pinouts. I already have extra USB ports that aren't used, so adding an PCI USB card doesn't really help anything.

    Read the article

  • Is a larger hard drive with the same cache, rpm, and bus type faster?

    - by Joel Coehoorn
    I recently heard that, all else being equal, larger hard are faster than smaller. It has to do with more bits passing under the read head as the drive spins - since a large drive packs the bits more tightly, the same amount of spin/time presents more data to the read head. I had not heard this before, and was inclined to believe the the read heads expected bits at a specific rate and would instead stagger data, so that the two drives would be the same speed. I now find myself looking at purchasing one of two computer models for the school where I work. One model has an 80GB drive, the other a 400GB (for ~$13 more). The size of the drive is immaterial, since users will keep their files on a file server where they can be backed up. But if the 400GB drive will really deliver a performance boost to the hard drive, the extra money is probably worth it. Thoughts?

    Read the article

  • Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

    - by Lloyd Watkin
    I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

    Read the article

  • Undeliverable messages to newly migrated Exchange user

    - by johnnyb10
    We are in the process of migrating from our old domain to a new one, part of which involves migrating mailboxes from Exchange 2003 to Exchange 2007. A bunch of users have been migrated already without problems. However, one of the users is having trouble receiving emails from others. When someone sends to him, they get an Undeliverable NDR that says "A configuration error in the e-mail system caused the message to bounce between two servers or to be forwarded between two recipients." The message shows the user's distinguished name as /OU=OurDomain/CN=Recipients/CN=USER57137172. The user's account name should just be "USER", so I don't know where the extra numbers ("57137172") are coming from. Thanks in advance.

    Read the article

  • Windows XP + PAE + 6GB RAM: See more than 3.5GB?

    - by nonot1
    Firstly let me say I've seen a number of similar questions on SuperUser, and I don't think this is a duplicate. (Most address 4GB RAM installed. I have 6GB) I have Windows XP 32-bit running on a i7-based Xeon system with 6GB of RAM. I only see 3.5GB of RAM in Windows. Is there any way to squeeze more visible RAM out of this set up? Even an extra 1GB would be great. Does having 6GB (vs 4GB) of RAM installed help at all? (I.e Even if I loose the 3.5-4.0 GB region, can I use the area above it?) P.S. Will eventually move to Windows 7 64-bit, but can't for now.

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >