Search Results

Search found 3324 results on 133 pages for 'gb j'.

Page 76/133 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• More than 3 seconds "Initial Connection" time (webpagetest.org)

  - by George Tasioulis

  I'm having a weird issue with a vBulletin forum, on a 2? Xeon E5645 w/ 16GB RAM, cPanel and LiteSpeed webserver; It takes too long to start loading... When I tested it with webpagetest.org I saw that for every request there's a 3 second "Initial connection" delay, which I don't know why is happening. Here's a screenshot: CPU Load is between 0.03 and 0.05, I've got several GB of free RAM, practical no I/O activity, and this delay can occur even with only one visitor on the forum. Where do you suggest I start searching? What could be the reason for this kind of delay? I don't think it's the webserver, or the forum because there's another website on the server (total 2 sites) which is WordPress based, and has exactly the same issue with the 3 second initial connection delay. I believe it's OS related, but need a clue on where to start looking. Thanks in advance :)

  Read the article

• Calculate a set of concatenated sets of n sets

  - by Andras Zoltan

  Okay - I'm not even sure that the term is right - and I'm sure there is bound to be a term for this - but I'll do my best to explain. This is not quite a cross product here, and the order of the results are absolutely crucial. Given: IEnumerable<IEnumerable<string>> sets = new[] { /* a */ new[] { "a", "b", "c" }, /* b */ new[] { "1", "2", "3" }, /* c */ new[] { "x", "y", "z" } }; Where each inner enumerable represents an instruction to produce a set of concatenations as follows (the order here is important): set a* = new string[] { "abc", "ab", "a" }; set b* = new string[] { "123", "12", "1" }; set c* = new string[] { "xyz", "xy", "x" }; I want to produce set ordered concatenations as follows: set final = new string { a*[0] + b*[0] + c*[0], /* abc123xyz */ a*[0] + b*[0] + c*[1], /* abc123xy */ a*[0] + b*[0] + c*[2], /* abc123x */ a*[0] + b*[0], /* abc123 */ a*[0] + b*[1] + c*[0], /* abc12xyz */ a*[0] + b*[1] + c*[1], /* abc12xy */ a*[0] + b*[1] + c*[2], /* abc12x */ a*[0] + b*[1], /* abc12 */ a*[0] + b*[2] + c*[0], /* abc1xyz */ a*[0] + b*[2] + c*[1], /* abc1xy */ a*[0] + b*[2] + c*[2], /* abc1x */ a*[0] + b*[2], /* abc1 */ a*[0], /* abc */ a*[1] + b*[0] + c*[0], /* ab123xyz */ /* and so on for a*[1] */ /* ... */ a*[2] + b*[0] + c*[0], /* a123xyz */ /* and so on for a*[2] */ /* ... */ /* now lop off a[*] and start with b + c */ b*[0] + c*[0], /* 123xyz */ /* rest of the combinations of b + c with b on its own as well */ /* then finally */ c[0], c[1], c[2]}; So clearly, there are going to be a lot of combinations! I can see similarities with Numeric bases (since the order is important as well), and I'm sure there are permutations/combinations lurking in here too. The question is - how to write an algorithm like this that'll cope with any number of sets of strings? Linq, non-Linq; I'm not fussed. Why am I doing this? Indeed, why!? In Asp.Net MVC - I want to have partial views that can be redefined for a given combination of back-end/front-end culture and language. The most basic of these would be, for a given base view View, we could have View-en-GB, View-en, View-GB, and View, in that order of precedence (recognising of course that the language/culture codes could be the same, so some combinations might be the same - a Distinct() will solve that). But I also have other views that, in themselves, have other possible combinations before culture is even taken into account (too long to go into - but the fact is, this algo will enable a whole bunch of really cool that I want to offer my developers!). I want to produce a search list of all the acceptable view names, iterate through the whole lot until the most specific match is found (governed by the order that this algo will produce these concatenations in) then serve up the resolved Partial View. The result of the search can later be cached to avoid the expense of running the algorithm all the time. I already have a really basic version of this working that just has one enumerable of strings. But this is a whole different kettle of seafood! Any help greatly appreciated.

  Read the article

• Anyone know of a good way to sell used servers?

  - by RandyMorris

  We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

  Read the article

• Need to store and backup HD vid files. But need to access them alot.

  - by Mike

  I've had my 700 Gb HDD ever since I bought my computer so partitioning it is out of the question. What I need is a place to keep my HD vid files so when I edit, I don't get a long load time in the editing software. But I also need to keep a back-up of all my other important files which I haven't been doing. Should I buy an additional internal drive JUST for vid files and buy an external for backup of all my files? What are my best options?

  Read the article

• Can I use a Mac Mini as a web server and database server? What are the pros and cons?

  - by Christopher Altman

  We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

  Read the article

• How does one get rid of fishy behavior in Windows?

  - by Tom Wijsman

  After I had boot my computer this morning there suddenly flooded water from the top of the screen, after which some fishes dropped into it. Now I can barely see what I am doing because the water distorts the view. Sometimes the fish follow the cursor so I need to move it away or wait for the fish to mind their own business. This makes it very annoying to use my system. What have I tried? Reboot the system. This caused the water to deplete from the desktop. Upon reboot, the screen was refilled with water and fishes. Attach another monitor. Same problem, fills that monitor as well and gives me extra fish. Clicking the fish. Makes them turn direction. Right clicking the fish. Changes color of the fish, not really useful. I'm locked out of changing the background or screen saver settings. Hence, I had to post the lady below... Safe mode doesn't save me from the fishes. It does give me another background there, but I can't screenshot easily. Other user accounts experience this as well. The Guest account seems to experience more fish than the other accounts. Using HijackThis, OTL Timekeeper List, Syninternal Autoruns, RootKitRevealer, ShellExView and similar tools I can't seem to find any entries that could be it, the Sysinternals tools show everything as verified. I'm suspecting this to be a driver problem. Randomly removing drivers doesn't seem to alleviate the problem. When removing the Graphics Drivers, it makes my screen black. While that could be considered the solution, it's not what I want. Changing the time / date settings does also not seem to affect the fishes. Changing the time a few years in the future, I would have expected the fishes to be dead. But, the same fishes are still there... They simply won't die! Tried to get used to them. They are really bothering me, looks like they require food. I don't know how to give them food, but apparently they get it elsewhere during reboot... Tried to disable my mouse pointer and use the keyboard. This works, they now swim around more randomly. They do put their attention to huge changes on the screen, so I need to type slow. Or otherwise I can't see what I'm tying exactly. Hold my laptop upside down. This seems to affect the water and fishes, but the water stays in the screen. They seem super resistant against water sickness and confusion though... What does the problem look like? What do I need? A way to get rid of these fishes on my screen forever, they are really annoying me a lot and I'm about to crack the screen to see if that makes them escape. Do you have any idea why this problem is occurring? What are my considerations? Buying an USB fish tank could make the fish leave the screen, I am uncertain though whether the fish could leave the screen through the USB cable. Using the FISh (programming language) which seems to provide EXPRESSIVE POWER and EFFICIENT EXECUTION, I can however not find any examples on how to remove fish. What are my Specifications? I'm using a Sony Vaio Fishy laptop. Sony VAIO VGN-Fishy, VAIO. Processor: 1337 MHz, Intel Core 2 Duo, T5432, 1 MB, Intel PM965 Express, 667 MHz. Memory: 1024 MB, DDR2-SDRAM, 667 MHz, 2 x 1024 MB, 4 GB. Disk Drive: 50 GB, Serial ATA, 5400 RPM. Storage Media: Memory Stick™, Memory Stick PRO™. Display: 15.4 ", 1280 x 800 pixels, LCD. Video: GeForce 8400M GT, 128 MB. Optical Drive: DVD±R/RW DL, 24 x, 24 x, 24 x, 6 x, 4 x, 6 x, 4 x, 5 x, 5 x, 8 x, 8 x, 8 x, 8 x, 6 x, 6 x, 24 x, 24 x, 24 x, 16 x. Camera: 1.3 MP, 30 fps. Networking: 2.0+EDR. Keyboard: Touchpad, AZERTY. Operating System/Software: Windows Vista Home Premium. Security: Kensington. Weight & Dimensions: 98.8 oz (2800 g), 14 " (355.8 mm), 10 " (254.4 mm), 0.98 " (24.9 mm). Other features: 100 BASE-TX/10 BASE-T, 802.11a/b/g/n/Draft n, V92/V.90, fishes. Plz! Help me...

  Read the article

• Run a MongoDB configuration server without 3GB of journal files

  - by Thilo

  For a production sharded MongoDB installation we need 3 configuration servers. According to the documentation "the config server mongod process is fairly lightweight and can be ran on machines performing other work". However, in the default configuration, they all have journalling enabled, and with preallocation this takes up 3 GB of disk space. I assume that the actual data and transaction volume of a config server is quite small, so that this seems a bit too much. Is there a way to (safely!) run these config servers with much less disk use for the journal? Do I need journalling at all on config servers? Can I set the journal size to be smaller?

  Read the article

• RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

  - by Nate Pinchot

  We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

  Read the article

• How to backup database dumps which only minor changes between the backups?

  - by wurlog

  I have a mysql dumpfile every night and i every one of them. Each is 14 GB in size, so my backupdrive will be full soon. The difference from one day to another are only some 100MB. How make the daily backups without wasting a lot of space. PS: i used tar to compress 1 file and the size went down to 5GB. I hoped that when i compress two files the ratio would be better, but no. 2 dumps compressed are 10Gb

  Read the article

• Windows Vista to Windows 7 Gbit LAN slow file copy

  - by ashgromnies

  I have two computers with gigabit LAN, one running Windows 7 and the other running Vista. I have a D-Link DIR-655 router, with gigabit LAN ports. I created a shared directory on the Vista computer, mapped it as a network drive on the Win 7 computer, and tried copying a 2 GB file... and it's going at 900 KB/s Yep... 900 kilobytes per second, about 7 Mb/s. Why so slow? Any ideas?

  Read the article

• Missing over 100GB of Space on sda1 RHEL

  - by WifiGhost

  I have a server setup with a RAID 5 using (3) 500GB drives, 1 as a spare so unused in the RAID. So in my mind i start out with 990GB with the RAID 5 in place. When looking at DF or the built in disk space utility i only see a total of about 882GB, how can i find where the 100+GB went? How can i get it back? I've checked the RAID 5 BIOS and i see all the space. I've tried looking manually and through terminal commands with no luck. Filesystem - 1K-blocks - Used Available - Use% - Mounted on /dev/mapper/vg_web-lv_root 838084192 48368700 747153060 7% / tmpfs 12104644 592 12104052 1% /dev/shm /dev/sda1 495844 121546 348698 26% /boot /dev/mapper/vg_web-lv_home 82569904 259136 78116468 1% /home Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_web-lv_root 800G 47G 713G 7% / tmpfs 12G 592K 12G 1% /dev/shm /dev/sda1 485M 119M 341M 26% /boot /dev/mapper/vg_web-lv_home 79G 254M 75G 1% /home

  Read the article

• moving to a new dedicated server and need advice on the new setup

  - by Eric Martin

  I currently have a dedicated server that we have outgrown and we are moving to another server. Our current setup was a 8gb W2008R2 server running a W2008R2 IIS virtual machine using VMWare. We are moving to a 2 cpu 24 gb server with W2012 R2 on Hyper-V. On our virtual machine we are running iis 7.5 and sql server. Sql Server seems to want to eat up all the memory so I had to cap it at 2gb, which doesn't seem sufficient. My question is, when I move the virtual machine to the new server, should I create 2 virtual machines, one for sql server and one for IIS? Or should I leave them both on the same virtual machine? Or even, put the Sql Server on the dedicated server and run the IIS in the vm? I'd like some input on how this should be done, I've not got the experience needed to make the right call. Thanks!

  Read the article

• Disk space consumed

  - by aravind-zoniac

  I have a very serious problem here in one of my client server. The remote server is installed with REDHAT ES 5.2 and we have a postgresql as database. I was trying to clone the database. The hard drive had 32 GB of free space before taking clone. I started cloning the database and during the process, there was some internet issue and due to this, putty got disconnected before taking clone. So I opened another fresh session and I was able to see only 2.5GB as available space. Also I was not able to see the clone in the psql terminal. Any solution to get the 29GB that was consumed????

  Read the article

• FireFox/NoScript: why has the NoScript icon disappeared?

  - by Peter Mortensen

  Why has the appearence of NoScript changed? Using Noscript in FireFox (Microsoft Windows): Until now there has been an icon (the S icon) in the lower right of the screen. But now there is an button instead with the text "Options". Left clicking this button seems to bring up the menu as right clicking the old icon. Can I restore the previous state? Is there an auto-update function in NoScript and if so could it have caused the change? If it exists can the auto-update function be disabled? Platform: FireFox 3.0.6, NoScript 1.9.0.6, Windows XP 64 bit, 8 GB RAM.

  Read the article

• What things should I run daily, weekly, monthly on my Windows machine?

  - by Jitendra vyas

  What things should I run daily, weekly, monthly on my Windows XP machine? De fragmentation Scan-disk Full system scan Disk clean up Trojan checker malware remover or any other thing... And should I run all these things in Safe-mode always? I want to perform all mentioned things automatically at night. How to set schedule and What would be the best plan? For daily weekly and monthly? I've 300 GB SATA HDD with 6 partition. I would like to know in above mentioned list: Which process should I run daily? Which process should I run weekly? Which process should I run on monthly basis How to set schedule for all in Windows task scheduler?

  Read the article

• fdisk -l shows a partition is not in /dev directory

  - by zitronic

  I am having troubles on mounting my ntfs hard drive on linux. I am running ophcrack live CD. fdisk shows me the hard drive I have installed on my computer fdisk -l Disk /dev/hdc: 30.0 GB, 30005821440 bytes 255 heads, 63 sectors/track, 3648 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 3647 29294496 7 HPFS/NTFS but I dont have that device on my /dev directory so I can not mount it ls /dev/hd* /dev/hda /dev/hda4 /dev/hda8 /dev/hdb2 /dev/hdb6 /dev/hdc /dev/hda1 /dev/hda5 /dev/hda9 /dev/hdb3 /dev/hdb7 /dev/hdd /dev/hda2 /dev/hda6 /dev/hdb /dev/hdb4 /dev/hdb8 /dev/hda3 /dev/hda7 /dev/hdb1 /dev/hdb5 /dev/hdb9 What could be going on_

  Read the article

• How to tell if PAE is hurting me?

  - by James

  I have a couple of servers with 20-30 GB RAM that are running (a variant of) RHEL4. They are currently running the SMP i386 kernel, not x64, not even the hugemem kernel. This means LowMem is confined to < 1G, and thus dentry_cache and ext3_inode_cache to 100M or so each. How can I tell if this is a problem? Here's a typical vmstat report while it's compiling some Java: $ vmstat 10 procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 19493816 394740 922420 0 0 1058 2292 1491 1020 6 3 80 12 2 1 0 19519480 395244 850156 0 0 1179 1412 1329 1195 9 4 75 12 1 1 0 19557368 392616 828344 0 0 1783 1680 1498 1756 14 5 72 9 I don't like the way bi is nonzero when there is so much memory free. I imagine slabtop could point more directly to the problem but I don't really understand how to interpret its output.

  Read the article

• Can you recover from a backup with bad blocks?

  - by Macbook-Recovery

  The hard drive in my Macbook recently gave up while using it on the plane (dual prop, lots of vibration unfortunately). I have a backup of its contents from a few weeks ago, but there are files that aren't included in it that I would like to recover. As it stands right now, I have it plugged to my macbook by USB. Snow leopard recognizes it, but can't mount it. Therefore, tools like Diskwarrior and Techtools do not work. I started doing a clone of it with Data Rescue 3, but after 7 hours of activity (20% through the drive), it has copied 130 GB of the drive but reports all of the data as "bad blocks". My question is this: Is any data recoverable if the clone is completely composed of bad blocks?

  Read the article

• Downloading Database dump from server

  - by Ctroy

  I have a mysql database on a server that is around 4 gb in size and I couldn't get it downloaded to my local machine. I tried getting a dump on the server, but the dump is not getting created probably because of the big size. Is there any way, I could get the dump downloaded on my local machine? I can syncing using Sqlyog but I know it will take ages. Is there a way, I can get a dump created on the server? By the way, my server is a linux server and its running php/mysql.

  Read the article

• How to know the root device size of some public AMI?

  - by red23jordan

  Since I do not want to pay money for my testing, the free limit size is 10G. I can know the root device root for some default AMI such as Amazon Linux AMI 2012.03 The Amazon Linux AMI 2012.03 is an EBS-backed, PV-GRUB image. It includes Linux 3.2, AWS tools, and repository access to multiple versions of MySQL, PostgreSQL, Python, Ruby, and Tomcat. Root Device Size: 8 GB And the last row displayed 8GB. However, if I find AMI in Community Page, it does not show the root device size. Can anyone know how to use the instance such as centOS that is not provided by default but it is under 10GB so that I can still free use?

  Read the article

• Change Language in Windows 8.1

  - by console

  I try to change the output language of windows 8.1 (not preview). I installed a German version of windows 8.1 and try to change language over the control panel as it is suggested by microsoft. But the change has no effect, and if i check the Language options it says "Es ist kein Sprachpaket verfügbar" (No language pack available). I cannot find a download for the en-GB language pack either, as MS suggests using the control panel to download the files. Has anybody experienced similar problems and found a solution?.

  Read the article

• Recording Skype Video

  - by Leah Peterson

  I have two problems - When doing a Skype video call, I can't see the other person. Skype says both my input and output are fast/good. I need a good recording program that will save both sides at once in a podcast. I've been playing around with Vodburner, but it seems to be very temperamental. I can't get anything longer than 30 seconds to save and even when if it does save, the file isn't compatible with Windows Live Movie Maker, even when I change the extension to .MP4 or .WMV. I tried to downlowd the format changer http://www.mediacoderhq.com/ that Vodburner suggests, but only got errors. I'm using Windows 7 with 62 GB free.

  Read the article

• VirtualBox - split partitioned VDI into separate VDIs

  - by mathematical.coffee

  I'm very new to VirtualBox. I set up an Arch Linux VM and a Ubuntu VM (Ubuntu host), both sharing the same .vdi like so (I had in my mind a dual-boot situation): VDI file (25GB) |- /dev/sda1: 5GB (Arch Linux) |- /dev/sda2: [Ubuntu] |- /dev/sda5 (swap, 1GB) |- /dev/sda6 Ubuntu /, 9GB |- /dev/sda7 Ubuntu /home, 10GB I've now realised that I don't want a dual-boot-type setup, I'd rather boot each machine independently (my initial thought was to share /home between Ubunto and Arch). So, my question: Can I split /dev/sda1 and /dev/sda2 each to their own .vdi files so I can use them as completely separate machines? I'd rather not have to re-install either Arch (because it took me ages to work it out!) or Ubuntu (because I've already done a few GB of updates and don't want to redo them). I haven't been able to find anything about this - most questions I see are about converting a .vdi to a partition on the host, or splitting a .vdi into multiple smaller files (that are not independent), or converting a partition on the host to a .vdi file. cheers.

  Read the article

• Restoring a Ubuntu Linux LVM drive

  - by user848106

  Scenario: I have a hard disk with a bootable sda1 partition and an Linux LVM. I seem to have corrupted the MBR? or Grub? not sure. I know it no longer boots and even with boot-repair and a Ubuntu live usb I was able to restore it. Following a "fix" with boot-repair I get "missing operating system" Can't i just reinstall grub or a new menu.lst? Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0007b68f Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >