Search Results

Search found 2338 results on 94 pages for 'minimum'.

Page 76/94 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Need advice - Developing a flexible documentation system, heavily focused on localization

    - by inkedmn
    I've been charged with building a documentation system/platform. Here's a short list of the major requirements: Easily localized : This will need to support a dozen or so languages out of the gate. (the ability for non-technical personnel to add/update translations would be a big plus, though not 100% required) Flexibility in output formats : At the bare minimum, I need to output the documents (either as a whole or in selected chunks) as PDF and HTML. Bonus points for native formats like Windows Help Files. Managed and deployed via an intuitive user interface (web, ideally). I'm wondering if you folks know of any systems out there that support this type of thing already? I'm not averse to writing this from scratch, but I'd rather not reinvent the wheel if I can help it. The two major candidates I've come across thus far are DocBook and reST. The former seems to have garnered a reputation for, well, sucking. I'm unfamiliar with either, but I'm told that reST would get me a good portion of the way there. Any other suggestions? Would I be better off building this from scratch?

    Read the article

  • What do I need to do besides code?

    - by user151841
    I'm a single-person operation for my small employer. I'm working on a couple of web applications that have grown to medium-size. We have backups going and everything is in version control with Subversion. I have comments in my code, but documentation outside of code is "spotty at best", and frequently things change. What do I need to do to bring it to the next level, beyond a pile of ( version-controlled, well-commented ) code? What would you say is required to have a robust set of documentation outside of the codebase itself, where the project is at, and where it's going? Ideally I would like some integrated system that would go from brainstorm, to requirements, to tracking bugs and features in svn check-in messages, to documentation. Would trac or redmine do something like this? I would like to show to my boss, "This is the prioritized list of features, this is where we are now, this is how long I spend on this feature, how long I spent on this bug" and I'd like to spend the minimum amount of time managing the projects :) What about ERD and UML diagrams? Is a project incomplete without them?

    Read the article

  • How can solve "Cross-thread operation not valid"?

    - by Phsika
    i try to start multi Thread but i can not it returns to me error: Cross-thread operation not valid: 'listBox1' thread was created to control outside access from another thread was. MyCodes: public DataTable dTable; public DataTable dtRowsCount; Thread t1; ThreadStart ts1; void ExcelToSql() { // SelectDataFromExcel(); ts1 = new ThreadStart(SelectDataFromExcel); t1 = new Thread(ts1); t1.Start(); } void SelectDataFromExcel() { string connectionString = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Source\Addresses.xlsx;Extended Properties=""Excel 12.0;HDR=YES;"""; OleDbConnection excelConnection = new OleDbConnection(connectionString); string[] Sheets = new string[] { "Sayfa1"}; excelConnection.Open(); // This code will open excel file. OleDbCommand dbCommand; OleDbDataAdapter dataAdapter; // progressBar1.Minimum = 1; foreach (var sheet in Sheets) { dbCommand = new OleDbCommand("select * From[" + sheet + "$]", excelConnection); //progressBar1.Maximum = CountRowsExcel(sheet).Rows.Count; // progressBar2.Value = i + 1; System.Threading.Thread.Sleep(1000); **listBox1.Items.Add("Tablo ismi: "+sheet.ToUpper()+"Satir Adeti: "+CountRowsExcel(sheet).Rows.Count.ToString()+" ");** dataAdapter = new OleDbDataAdapter(dbCommand); dTable = new DataTable(); dataAdapter.Fill(dTable); dTable.TableName = sheet.ToUpper(); dTable.Dispose(); dataAdapter.Dispose(); dbCommand.Dispose(); ArrangedDataList(dTable); FillSqlTable(dTable, dTable.TableName); } excelConnection.Close(); excelConnection.Dispose(); }

    Read the article

  • Ordering z-indexes in an array

    - by Tom Gullen
    I have an array which looks something along the lines of resourceData[0][0] = "pic1.jpg"; resourceData[0][1] = 5; resourceData[1][0] = "pic2.jpg"; resourceData[1][1] = 2; resourceData[2][0] = "pic3.jpg"; resourceData[2][1] = 900; resourceData[3][0] = "pic4.jpg"; resourceData[3][1] = 1; The numeric represents the z-index of the image. Minimum z-index value is 1. Maximum (not really important) is 2000. I have all the rendering and setting z-indexes done fine. My question is, I want to have four functions: // Brings image to z front function bringToFront(resourceIndex) { // Set z-index to max + 1 resourceData[resourceIndex][1] = getBiggestZindex() + 1; // Change CSS property of image to bring to front $('#imgD' + resourceIndex).css("z-index", resourceData[resourceIndex][1]); } function bringUpOne(resourceIndex) { } function bringDownOne(resourceIndex) { } // Send to back z function sendToBack(resourceIndex) { } So given then index [3] (900 z): If we send it to the back, it will take the value 1, and [3] will have to go to 2, but that conflicts with [1] who has a 2 z-index so they need to go to three etc. Is there an easy programatical way of doing this because as soon as I start doing this it's going to get messy. It's important that the indexes of the array don't change. We can't sort the array unfortunately due to design. Update Thanks for answers, I'll post the functions here once they are written incase anyone comes across this in the future (note this code has zindex listed in [6]) // Send to back z function sendToBack(resourceIndex) { resourceData[resourceIndex][6] = 1; $('#imgD' + resourceIndex).css("z-index", 1); for (i = 0; i < resourceData.length; i++) { if (i != resourceIndex) { resourceData[i][6]++; $('#imgD' + i).css("z-index", resourceData[i][6]); } } }

    Read the article

  • How can a B-tree node be represented?

    - by chronodekar
    We're learning B-trees in class and have been asked to implement them in code. The teacher has left choice of programming language to us and I want to try and do it in C#. My problem is that the following structure is illegal in C#, unsafe struct BtreeNode { int key_num; // The number of keys in a node int[] key; // Array of keys bool leaf; // Is it a leaf node or not? BtreeNode*[] c; // Pointers to next nodes } Specifically, one is not allowed to create a pointer to point to the structure itself. Is there some work-around or alternate approach I could use? I'm fairly certain that there MUST be a way to do this within the managed code, but I can't figure it out. EDIT: Eric's answer pointed me in the right direction. Here's what I ended up using, class BtreeNode { public List<BtreeNode> children; // The child nodes public static int MinDeg; // The Minimum Degree of the tree public bool IsLeaf { get; set; } // Is the current node a leaf or not? public List<int> key; // The list of keys ... }

    Read the article

  • Suitable web framework for the following scenario

    - by Paralife
    I have the following scenario: I have a view in an Oracle server and all Iwant is to show that view in a web browser, along with an input field or two for basic filtering. No users, no authentication, just this view maybe with a column or two linking to a second page for master detail viewing. The children are just string descriptions of the columns of the master that contain IDs. No inserts or updates. The question is which is the JAVA based web framework of choice that can accomplish the above in the minimum amount of code lines code time(subjective but also kind of objective if someone has expirience with more than one or two frameworks) configuration effort deployment effort and requirements. dependencies and mem footprint Also: 6. Oracle APEX is not an option. 3,4 and 5 are maybe the same in the sense that they are everything except the functionality coding. I want something that I can compile, deploy by just FTPing to the database host, run and forget. (e.g. For the deployment aspect, Hudson way comes in mind (java -jar hudson.war and that's all)). Also: 3,4 have priority over 1 and 2. (Explanation with a rant: I dont mind coding a lot as long as it is application code and not "why the fuck do we still use javascript over http for everything" code) Thanks.

    Read the article

  • How can I have a Label change dynamically based on a Slider Value?

    - by duney
    I'm writing a grade calculator and I currently have a slider with a textbox beside it which displays the current value of the slider: <Slider Name="gradeSlider" Grid.Row="3" Grid.Column="2" VerticalAlignment="Center" Minimum="40" Maximum="100" IsSnapToTickEnabled="True" TickFrequency="5" TickPlacement="BottomRight"/> <TextBox Name="targetGrade" Grid.Row="3" Grid.Column="3" Width="30" Height="23" Text="{Binding ElementName=gradeSlider, Path=Value}" TextAlignment="Center"/> However I'm struggling to include a label which will show display a different grade classification based on the slider's value range. I'd have thought that I could create the label: <Label Name="gradeClass" Grid.Row="2" Grid.Column="2" HorizontalAlignment="Center" VerticalAlignment="Bottom"/> And then use code: string gradeText; if (gradeSlider.Value >= 40 && gradeSlider.Value < 50) { gradeText = "Pass"; gradeClass.Content = gradeText; } else if (gradeSlider.Value >= 50 && gradeSlider.Value < 60) { gradeText = "2:2"; gradeClass.Content = gradeText; } else { gradeText = "so on..."; gradeClass.Content = gradeText; } But the label just stays as "Pass" whatever the slider value. Could somebody please advise me as to where I'm going wrong? I tried using Content = "{Binding Source = gradeText}" on the Label xaml and removing the gradeClass.Content's in the code but it complained that gradeText was declared but never used. Many thanks to anyone who can help.

    Read the article

  • Strategy for animation a lot of LED's - thread?, UIView animations? NSOperation? (iPhone)

    - by RickiG
    Hi I have to do some different views containing 72 LED lights. I built an LED Class so I can loop through the LED's and set them to different colors (Green, Red, Orange, Blue None etc.). The LED then loads the appropriate .png. This works fine, I loop over the LED's and set them. Now I know that at some time they will need to not just turn on/off change color, but will have to turn on with a small delay. Like an equalizer. I have a 5-10 views containing the 72 LED's and I would like to achieve the above with the minimum amount of memory/CPU strain. for(LED *l in self.ledArray) { [l display:Green]; } I simply loop as shown above and inside the LED is a switch case that does the correct logic. If this were actual LED's and a microController I would use sleep(100) or similar in the loop, but I would really like to avoid stuff like that for obvious reasons. I was thinking that doing a performOnThread withDelay would really be consuming, so would UIView animation changing the alpha and NSOperation would also be a lot of lifting for a small feature. Is there a both efficient and clever way to go around this? Thanks for any inspiration given:)

    Read the article

  • Explaining a Ruby code snippet

    - by Michael Foukarakis
    I'm in that uncomfortable position again, where somebody has left me with a code snippet in a language I don't know and I have to maintain it. While I haven't introduced Ruby to myself some parts of it are quite simple, but I'd like to hear your explanations nonetheless. Here goes: words = File.open("lengths.txt") {|f| f.read }.split # read all lines of a file in 'words'? values = Array.new(0) words.each { |value| values << value.to_i } # looked this one up, it's supposed to convert to an array of integers, right? values.sort! values.uniq! diffs = Array.new(0) # this looks unused, unless I'm missing something obvious sum = 0 s = 0 # another unused variable # this looks like it's computing the sum of differences between successive # elements, but that sum also remains unused, or does it? values.each_index { |index| if index.to_i < values.length-1 then sum += values.at(index.to_i + 1) - values.at(index.to_i) end } # could you also explain the syntax here? puts "delta has the value of\n" # this will eventually print the minimum of the original values divided by 2 puts values.at(0) / 2 The above script was supposed to figure out the average of the differences between every two successive elements (integers, essentially) in a list. Am I right in saying this is nowhere near what it actually does, or am I missing something fundamental, which is likely considering I have no Ruby knowledge?

    Read the article

  • App Crashing Inspite of Being ARC Enabled

    - by proctr
    I have been working on an iOS App for sometime now and its almost ready to submit. However, when I gave it to few people for testing purposes (running iOS 5)..they reported cases where the app crashes and the home screen is displayed on the phone OR a frozen app screen appears with no response whatsoever The app is ARC enabled and Xcode shows no warnings. So, I'm relli tensed about what's going wrong. I have declared properties in the following fashion: @property (nonatomic) IBOutlet UILabel *devCountLabel; @property (nonatomic) IBOutlet UIView *splashView; Likewise other properties are declared. Could anyone provide a solution ASAP. It is mainly a network based app and thus, CoreData usage is minimum.. Anyway, I'm running out of time..So Please provide a fix asap..oh and thanks a ton for it. PS: The App doesn't crash in the simulator, so I'm guessing it has something related to memory. And the crashes are random. So, repeating a set of steps to reproduce the crash doesn't help either. For Eg. When I click a button, modalViewControllerAnimation results in normal case. Now this occurs as expected most of the time and freezes the app other times.

    Read the article

  • How do I select every 6th element from a list (using Linq)

    - by iDog
    Hi, I've got a list of 'double' values. I need to select every 6th record. It's a list of coordinates, where I need to get the minimum and maximum value of every 6th value. List of coordinates (sample): [2.1, 4.3, 1.0, 7.1, 10.6, 39.23, 0.5, ... ] with hundrets of coordinates. Result should look like: [x_min, y_min, z_min, x_max, y_max, z_max] with exactly 6 coordinates. Following code works, but it takes to long to iterate over all coordinates. I'd like to use Linq instead (maybe faster?) for (int i = 0; i < 6; i++) { List<double> coordinateRange = new List<double>(); for (int j = i; j < allCoordinates.Count(); j = j + 6) coordinateRange.Add(allCoordinates[j]); if (i < 3) boundingBox.Add(coordinateRange.Min()); else boundingBox.Add(coordinateRange.Max()); } Any suggestions? Many thanks! Greets!

    Read the article

  • highlighting data values in a sql result set

    - by potatoe
    I can think of a number of ways to do this in PHP or even JavaScript, but I'm wondering if there's a SQL-based technique I'm overlooking. I have a database table, let's say 20 fields X 10 rows. I want to display the entire table on an web page, so I'd do something like SELCT * FROM data_table;, and then format the result set using HTML table tags. However, I'd also like to highlight values in the table based on whether they are the maximum or minimum value in their column. For example, I'd add bold tags around the max in each column. A resulting table might look something like this, with bold tags shown: id | field1 | field2 | field3 | ... 0 | 5 | 2 | <b>7</b> | ... 1 | 3 | <b>8</b> | 6 | ... 2 | <b>9</b> | 5 | 1 | ... ... I could do a separate SELECT with an ORDER BY for each field and then interpret the results, but that seems like a lot of extra DB access. My alternative right now is to just fetch the whole table, and then sort/search for the highlight values using PHP. Is there a better way?

    Read the article

  • Objective C : UIButton image with NSArray in a random order

    - by Sarah
    Brief Idea about the flow : I have say minimum 1 and maximum 18 records in my database with a text and an image from which I have to fetch images and place any 3 of the same randomly to 3 UIButtons among which one image should match with my question. i.e. 1 is the answer and other 2 are the distractors. For Example : Question is : where is Apple? Now among the bunch of images, I want to place any 3 images on the 3 UIButtons(1 answer i.e. An Apple and 2 distractors) in a random order and on selecting the UIButton it should prompt me if it's a right answer or not. I am implementing below code for placing the UIImages in a random order : -(void) placeImages { NSMutableArray *images = [NSMutableArray arrayWithArray:arrImg]; NSArray *buttons = [NSArray arrayWithObjects:btn1,btn2,btn3, nil]; for (UIButton *btn in buttons) { int randomIndex= random() % images.count; UIImage *img = [images objectAtIndex:randomIndex]; [btn setImage:img forState:UIControlStateNormal]; [images removeObjectAtIndex:randomIndex]; } } But I am stuck at a point that how should I get 1 UIButton image with an answer and other as distractors also that how should i maintain the index of the image from the NSArray? Kindly guide me. Thank you.

    Read the article

  • Objective-measures of the expressiveness of programming languages [closed]

    - by Casebash
    I am very interested in the expressiveness of different languages. Everyone who has programmed in multiple languages knows that sometimes a language allows you to express concepts which you can't express in other languages. You can have all kinds of subjective discussion about this, but naturally it would be better to have an objective measure. There do actually exist objective measures. One is Turing-Completeness, which means that a language is capable of generating any output that could be generated by following a sequential set of steps. There are also other lesser levels of expressiveness such as Finite State Automata. Now, except for domain specific languages, pretty much all modern languages are Turing complete. It is therefore natural to ask the following question: Can we can define any other formal measures of expressiveness which are greater than Turing completeness? Now of course we can't define this by considering the output that a program can generate, as Turing machines can already produce the same output that any other program can. But there are definitely different levels in what concepts can be expressed - surely no-one would argue that assembly language is as powerful as a modern object oriented language like Python. You could use your assembly to write a Python interpreter, so clearly any accurate objective measure would have to exclude this possibility. This also causes a problem with trying to define the expressiveness using the minimum number of symbols. How exactly to do so is not clear and indeed appears extremely difficult, but we can't assume that just because we don't know how to solve a problem, that nobody know how to. It is also doesn't really make sense to demand a definition of expressiveness before answering the question - after all the whole point of this question is to obtain such a definition. I think that my explanation will be clear enough for anyone with a strong theoretical background in computer science to understand what I am looking for. If you do have such a background and you disagree, please comment why, but if you don't thats probably why you don't understand the question.

    Read the article

  • java.awt -- when java outputs an image to my monitor (screen), where is the file that is output to the monitor card?

    - by user1405870
    Suppose that I am drawing a set of images using java graphics objects. Suppose that I java is outputting these images to my monitor. Where is the file or files that are sent to the monitor card (the graphical representation files). How can I take this file and save it to disk, or how can I take this file and write it to an array, or how can I take these files and combine the results of their output (to the monitor) into a single file for saving? I don't want to use a screen shot feature, I want to be able to redirect (xor capture also) the output to the monitor to some sort of byte-stream. I note that monitors are much better than semaphores, when you are talking about display capabilities; I don't need a counter example. I might not be asking the correct question. It might be that I want to capture the file while it is still in User Space, before it is put into 'Device Space'. I would like to try and capture the byte stream so that I can convert it to MPEG-4 format. I either need a streaming output from the MPEG-4 converter, coming from the streaming input, or else, I need to take static images at discrete times and convert the images. What format will the output from User Space be in? What format will the Device Space output be in? Try to keep speculation to a minimum. http://docs.oracle.com/javame/config/cdc/opt-pkgs/api/jsr927/index.html I guess that Java has made a means of displaying AWT objects on a television screen. Thank you. Ryan Zoerner

    Read the article

  • Can a pc with a 1.2 ghz dual core run VS 2013? [on hold]

    - by moo2
    Edit: This question is about a tool used for programming, Microsoft Visual Studio 2013. I already read the minimum requirements for VS 2013 before I posted or I wouldn't have asked the question. I searched on the web for an answer for a few hours before posting. Why should I go out and spend $400 on a laptop if I can spend less than $100 and use it to learn how to program? In the context of the question it is clear I was not asking for advice on what laptop to buy and it was also clear I was not asking for someone to walk me through the system requirements of VS 2013. This is a vast community and I was wondering if someone in this vast community would have experience in dealing with my question. In other words has anyone ever tried anything like it? If I had an old computer sitting around I would have tested it. At the moment all I have is a friend's Chromebook I'm borrowing. End Edit. I know the requirements for Microsoft Visual Studio 2013 state 1.6 ghz processor. I'm looking at getting a laptop for school and I found one that is old but cheap and would work for college. The Dell D430 I'm looking at getting has a 1.2ghz Core 2 Duo CPU, 80GB HD, 2GB RAM, and Windows 7 Home Premium. It's refurbished. I can get it for less than most phone's cost and from a Microsoft Authorized Refurbisher. I know it's not a skyrim rig but it's lightweight and can handle being a college laptop and doing word processing. Would Visual Studio 2013 run at all? If it is slower I'm not concerned. I just want to know if it would work and compile my assignments and run them? I'd be using this laptop for doing assignments and learning programming languages not for coding the next social media sensation.

    Read the article

  • Getting macro keys from a razer blackwidow to work on linux

    - by Journeyman Geek
    I picked up a razer blackwidow ultimate that has additional keys meant for macros that are set using a tool that's installed on windows. I'm assuming that these arn't some fancypants joojoo keys and should emit scancodes like any other keys. Firstly is there a standard way to check these scancodes in linux? Secondly how do i set these keys to do things in command line and x based linux setups? My current linux install is xubuntu 10.10, but i'll be switching to kubuntu once i have a few things fixed up. Ideally the answer should be generic and system-wide Things i have tried so far: showkeys from the built in kbd package (in a seperate vt) - macro keys not detected xev - macro keys not detected lsusb and evdev output this ahk script's output suggests the M keys are not outputting standard scancodes Things i need to try snoopy pro + reverse engineering (oh dear) Wireshark - preliminary futzing around seems to indicate no scancodes emitted when what i seem to think is the keyboard is monitored and keys pressed. Might indicate additional keys are a seperate device or need to be initialised somehow. Need to cross reference that with lsusb output from linux, in 3 scenarios - standalone, passed through to a windows VM without the drivers installed, and the same with. LSUSB only detects one device on a standalone linux install It might be useful to check if the mice use the same razer synapse driver , since that means some variation of razercfg might work (not detected. only seems to work for mice) Things i have Have worked out: In a windows system with the driver, the keyboard is seen as a keyboard and a pointing device. And said pointing device uses, in addition to your bog standard mouse drivers.. a driver for something called a razer synapse. Mouse driver seen in linux under evdev and lsusb as well Single Device under OS X apparently, though i have yet to try lsusb equivilent on that Keyboard goes into pulsing backlight mode in OS X upon initialisation with the driver. This should probably indicate that there's some initialisation sequence sent to the keyboard on activation. They are, in fact, fancypants joojoo keys. Extending this question a little I have access to a windows system so if i need to use any tools on that to help answer the question, its fine. I can also try it on systems with and without the config utility. The expected end result is still to make those keys usable on linux however. I also realise this is a very specific family of hardware. I would be willing to test anything that makes sense on a linux system if i have detailed instructions - this should open up the question to people who have linux skills, but no access to this keyboard The minimum end result i require I need these keys detected, and usable in any fashion on any of the current graphical mainstream ubuntu varients

    Read the article

  • Disk is spinning down each minute, unable to disable it

    - by lzap
    I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

    Read the article

  • swapping or thrashing with vast amounts of unmapped pagecache

    - by Marco
    EDIT: I noticed that this is more appropriate for superuser.com, I apologize. I don't know how to delete this question. I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

    Read the article

  • Allow anonymous upload for Vsftpd?

    - by user15318
    I need a basic FTP server on Linux (CentOS 5.5) without any security measure, since the server and the clients are located on a test LAN, not connected to the rest of the network, which itself uses non-routable IP's behind a NAT firewall with no incoming access to FTP. Some people recommend Vsftpd over PureFTPd or ProFTPd. No matter what I try, I can't get it to allow an anonymous user (ie. logging as "ftp" or "anonymous" and typing any string as password) to upload a file: # yum install vsftpd # mkdir /var/ftp/pub/upload # cat vsftpd.conf listen=YES anonymous_enable=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root #directory was created by root, hence owned by root.root anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #chroot_local_user=NO #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list chown_uploads=YES When I log on from a client, here's what I get: 500 OOPS: cannot change directory:/var/ftp/pub/incoming I also tried "# chmod 777 /var/ftp/incoming/", but get the same error. Does someone know how to configure Vsftpd with minimum security? Thank you. Edit: SELinux is disabled and here are the file permissions: # cat /etc/sysconfig/selinux SELINUX=disabled SELINUXTYPE=targeted SETLOCALDEFS=0 # sestatus SELinux status: disabled # getenforce Disabled # grep ftp /etc/passwd ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin # ll /var/ drwxr-xr-x 4 root root 4096 Mar 14 10:53 ftp # ll /var/ftp/ drwxrwxrwx 2 ftp ftp 4096 Mar 14 10:53 incoming drwxr-xr-x 3 ftp ftp 4096 Mar 14 11:29 pub Edit: latest vsftpd.conf: listen=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root anonymous_enable=YES anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #500 OOPS: bad bool value in config file for: chown_uploads chown_uploads=YES chown_username=ftp Edit: with trailing space removed from "chown_uploads", err 500 is solved, but anonymous still doesn't work: client> ./ftp server Connected to server. 220 (vsFTPd 2.0.5) Name (server:root): ftp 331 Please specify the password. Password: 500 OOPS: cannot change directory:/var/ftp/pub/incoming Login failed. ftp> bye With user "ftp" listed in /etc/passwd with home directory set to "/var/ftp" and access rights to /var/ftp set to "drwxr-xr-x" and /var/ftp/incoming to "drwxrwxrwx"...could it be due to PAM maybe? I don't find any FTP log file in /var/log to investigate. Edit: Here's a working configuration to let ftp/anonymous connect and upload files to /var/ftp: listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES anon_mkdir_write_enable=YES

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Linux Software RAID recovery

    - by Zoredache
    I am seeing a discrepancy between the output of mdadm --detail and mdadm --examine, and I don't understand why. This output mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Array Size : 3662760640 (3493.08 GiB 3750.67 GB) Used Dev Size : 1465104256 (1397.23 GiB 1500.27 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 Persistence : Superblock is persistent Seems to contradict this. (the same for every disk in the array) mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 0.90.00 UUID : 1f54d708:60227dd6:163c2a05:89fa2e07 (local to host) Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Used Dev Size : 1465104320 (1397.23 GiB 1500.27 GB) Array Size : 2930208640 (2794.46 GiB 3000.53 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 The array was created like this. mdadm -v --create /dev/md2 \ --level=raid10 --layout=o2 --raid-devices=5 \ --chunk=64 --metadata=0.90 \ /dev/sdg2 /dev/sdf2 /dev/sde2 /dev/sdd2 /dev/sdc2 Each of the 5 individual drives have partitions like this. Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057754 Device Boot Start End Blocks Id System /dev/sdc1 2048 34815 16384 83 Linux /dev/sdc2 34816 2930243583 1465104384 fd Linux raid autodetect Backstory So the SATA controller failed in a box I provide some support for. The failure was a ugly and so individual drives fell out of the array a little at a time. While there are backups, we the are not really done as frequently as we really need. There is some data that I am trying to recover if I can. I got additional hardware and I was able to access the drives again. The drives appear to be fine, and I can get the array and filesystem active and mounted (using read-only mode). I am able to access some data on the filesystem and have been copying that off, but I am seeing lots of errors when I try to copy the most recent data. When I am trying to access that most recent data I am getting errors like below which makes me think that the array size discrepancy may be the problem. Mar 14 18:26:04 server kernel: [351588.196299] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.196309] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.196313] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.199260] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.199264] dm-7: rw=0, want=20647626304, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.202446] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.202450] dm-7: rw=0, want=19973212288, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.205516] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.205520] dm-7: rw=0, want=8009695096, limit=6442450944

    Read the article

  • How to reinstall Mac OS X on OS X/Linux dual-boot system?

    - by strangeronyourtrain
    My setup: I have a MacBook Pro 5,5 with a Mac OS X Snow Leopard partition and a Linux partition. I use rEFIt to boot into Linux. I didn't use Boot Camp when I originally installed Linux; instead, I manually created the partition (with either Disk Utility in OS X or Gparted on a Linux live CD--I don't recall which one) and then installed Linux on it from a live CD. The problem: My OS X partition is corrupt, and I need to reinstall Snow Leopard. Since I installed rEFIt from within OS X, I'm concerned that wiping the OS X partition will prevent me from booting into my Linux partition. How can I do this without losing access to my Linux partition? Is it possible to install Snow Leopard on the partition I reserved for it, or will it automatically overwrite the entire drive? And if I do the fresh OS X install and then install rEFIt again, will it automatically recognize my Linux partition? Thanks for any tips! Specs: MacBook Pro 5,5 (Mid-2009); Snow Leopard 10.6.7/64-bit Sabayon Linux, 2.6.36 kernel EDIT/UPDATE: Thanks, but the situation has taken a more complicated turn: I tried to reinstall Snow Leopard from the DVD, but it refused to install onto my Mac partition, claiming: "The disk cannot be used to start up your computer." Disk Utility wouldn't let me resize the partition or create a new one, and it doesn't see my Linux partition. It only displays the two partitions "Macintosh HD" and Linux Swap. I can, however, see all the partitions from Linux. This is the partition table as shown in Gparted: And the output of "fdisk -l" is: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 409639 204819+ ee GPT /dev/sda2 409640 349590464 174590412+ af HFS / HFS+ /dev/sda3 483122745 488392064 2634660 82 Linux swap / Solaris /dev/sda4 * 349590465 483122744 66766140 83 Linux Partition table entries are not in disk order I wonder if this is because I originally partitioned my disk with Gparted instead of OS X's Disk Utility (at this point, I don't recall whether I used Gparted or Disk Utility). In any case, it doesn't seem safe to do any reformatting with Disk Utility now, as I'm afraid it will wipe sda2 ("Macintosh HD") as well as sda4 (my Linux partition). So... I'm hoping to find a solution that doesn't involve wiping my entire hard disk. Would it be safe/possible to use Gparted to erase sda2 ("Macintosh HD") and then use the Snow Leopard DVD to install OS X onto [I]just[/I] sda2 without touching the other partitions? Thanks for any insight!

    Read the article

  • Authenticating Apache HTTPd against multiple LDAP servers with expired accounts

    - by Brian Bassett
    We're using mod_authnz_ldap and mod_authn_alias in Apache 2.2.9 (as shipped in Debian 5.0, 2.2.9-10+lenny7) to authenticate against multiple Active Directory domains for hosting a Subversion repository. Our current configuration is: # Turn up logging LogLevel debug # Define authentication providers <AuthnProviderAlias ldap alpha> AuthLDAPBindDN "CN=Subversion,OU=Service Accounts,O=Alpha" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://dc01.alpha:3268/?sAMAccountName?sub? </AuthnProviderAlias> <AuthnProviderAlias ldap beta> AuthLDAPBindDN "CN=LDAPAuth,OU=Service Accounts,O=Beta" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://ldap.beta:3268/?sAMAccountName?sub? </AuthnProviderAlias> # Subversion Repository <Location /svn> DAV svn SVNPath /opt/svn/repo AuthName "Subversion" AuthType Basic AuthBasicProvider alpha beta AuthzLDAPAuthoritative off AuthzSVNAccessFile /opt/svn/authz require valid-user </Location> We're encountering issues with users that have accounts in both Alpha and Beta, especially when their accounts in Alpha are expired (but still present; company policy is that the accounts live on for at a minimum of 1 year). For example, when the user x (which has en expired account in Alpha, and a valid account in Beta), the Apache error log reports the following: [Tue May 11 13:42:07 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14817] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:08 2010] [warn] [client 10.1.1.104] [14817] auth_ldap authenticate: user x authentication failed; URI /svn/ [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue May 11 13:42:08 2010] [error] [client 10.1.1.104] user x: authentication failure for "/svn/": Password Mismatch [Tue May 11 13:42:08 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ Attempting to authenticate as a non-existant user (nobodycool) results in the correct behavior of querying both LDAP servers: [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:40 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://ldap.beta:3268/?sAMAccountName?sub? [Tue May 11 13:42:44 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:44 2010] [error] [client 10.1.1.104] user nobodycool not found: /svn/ [Tue May 11 13:42:44 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ How do I configure Apache to correctly query Beta if it encounters an expired account in Alpha?

    Read the article

  • Client A can ping server S, but client B cannot

    - by Soundar Rajan
    I moved the question to here from stackoverflow.com http://stackoverflow.com/questions/2917569/unable-to-ping-server-from-client-b-but-able-to-ping-from-client-a-please-help I am trying to configure a IIS 6.0/Windows Server 2003 web server with a ASP.net application. When I try to ping the server from client computer A I get the following: PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping succeeds! From client computer B, BOTH the pings fail. PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping fails with a message "Ping request could not find host 74.208.192.xxx:80" Both clients A and B are on the same subnet. The server is outside (a virtual server hosted by an ISP) I have an ASP.NET application in a virtual directory on the server. In IE or firefox, if I enter http://74.208.192.xxx/subdir/subdir/../Default.aspx, it works from both the clients! The server has default firewall settings but web server enabled (Port 80 is open). From client A (note the different 'reply to' address when the ping succeeds. C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx Pinging 74.208.192.xx with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.xx: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx:80 Pinging 74.208.192.xx:80 [208.67.216.xxx] with 32 bytes of data: Reply from 208.67.216.xxx: bytes=32 time=35ms TTL=54 ... Reply from 208.67.216.xxx: bytes=32 time=33ms TTL=54 Ping statistics for 208.67.216.xxx: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 54ms, Average = 38ms From client B C:\Documents and Settings\user>ping 74.208.192.81 Pinging 74.208.192.81 with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.81: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Documents and Settings\user>ping 74.208.192.81:80 Ping request could not find host 74.208.192.81:80. Please check the name and try again. My main problem is I have a web service (asmx) file and the web service client program is not able to access it from client B, but able to access it from client A. I am trying to find out why and thought this ping issue may shed some light. I can ping yahoo.com both the computers.

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >