Search Results

Search found 4644 results on 186 pages for 'osx mavericks'.

Page 76/186 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Aperture and networked drive: thinks images are offline

    - by AK
    I keep my photos on a networked drive (wireless), and they are referenced by Aperture. Aperture seems to not try very hard to look for this drive. Usually I have to open the network drive in Finder before opening Aperture -- otherwise it doesn't find the images and considers them offline. To me this seems like Aperture isn't willing to look on the network for the drive, unless it was helped along by pointing it out in Finder. It doesn't work if I start Aperture first and then navigate to the drive in Finder. What are some workarounds to making this functional? Is there a way to tell Aperture to look again without restarting the program?

    Read the article

  • Set up ad hoc wireless connection between Windows Vista and Mac OS X

    - by Skarab
    I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

    Read the article

  • How do I compile DarWINE in PowerPC Mac OS X 10.4.11...?

    - by Craig W. Davis
    So far I've tried using MacPorts which gives me this error: /Error: Cannot install wine for the arch(s) 'powerpc' because Error: its dependency pkgconfig is only installed for the archs 'i386 ppc'. Error: Unable to execute port: architecture mismatch To report a bug, etc... (I'm not allowed to post two links due to being a new poster...)./ I've also tried using the build script I found in the DarWINE 0.9.12 SDK download that I found on the DarWINE SourceForge.net Project Page... I've also tried the build script that I found at http://code.google.com/p/osxwinebuilder/#Building_Wine_via_the_script... None of these attempts to build DarWINE have actually worked. Whenever I build using the DarWINE build script I run it as follows: /1. I decompress the WINE tarball into ~/Downloads/WINE 2. I cd into ~/Downloads/DarWINE. 3. I run ./winemaker ~/Downloads/WINE/wine-1.2.2 or ./winemaker ~/Downloads/WINE/wine-1.2-rc2 (the reason for trying WINE 1.2-rc2 is that some people managed to get it to build on PowerPC Macs running 10.5.8...)./ I made sure to install Xcode Tools 2.5 & all the SDKs too... The net result is either a syntax type error resulting from trying to run the checked out Google Code DarWINE build script or a bunch of make errors when trying to run the official DarWINE build script that I forcefully extracted from the DarWINE 0.9.12 SDK .dmg file by using Pacifist. I trying to build DarWINE on mid-April 2006 1.42 GHz eMac with DL SuperDrive with Bluetooth 2.0+EDR with 2 GBs of RAM running 10.4.11 as I mentioned earlier... (it came with 10.4.4 on the Mac's Restore DVD-ROM that I ordered from 1-800-SOS-APPL & coconutIdentityCard told me it was made on April 12th 2006 & I know that's right because when I reinstalled Mac OS X 10.4.4 it displayed that it was registered/previously owned by a Hawaiian school...): /make[1]: winegcc: Command not found make[1]: * [main.o] Error 127 make: * [dlls/acledit] Error 2./

    Read the article

  • How to make TimeMachine back up contents of any path or mounted volume

    - by Olfan
    I keep different types of data in different encrypted sparsebundle images (say, one for each client) which automatically mount upon login but can't be opened by anybody other than myself. So, after login I have a number of virtual volumes in /Volumes/ which keeps my client data both secure and organized. How do I include data inside these virtual Volumes in TimeMachine's backups, or data residing in any path on any partition/volume? I found a promising solution description at blog.eurocomp.info involving editing the com.apple.TimeMachine.plist but all I can get TimeMachine to do is backing up the sparsebundle files themselves. I want it to back up the files inside the mounted image, though - something like adding /Volumes/Client_abc/ to TimeMachine's search path. Please do not redirect my to this previous question as it doesn't solve the problem at all. Please also refrain from telling me why you think I should not want this answer as that will not solve anything either. Please lastly don't say "it can't be done" unless you can technically prove that claim.

    Read the article

  • SMB super slow within LAN between MAC and PC

    - by asdcasdc
    I have a windows desktop which stores all my movies, songs and pictures. I have a mac laptop which I would like to access these files. I don't want to utilize the FTP or SCP protocol because I don't want them to be downloaded to my mac. I want to access them as if they are a network mounted disk. So I tried using the native SMB protocol (available in Finder - Go - Connect to server). I tried dragging a file and dropping it onto my MAC's desktop. Surprisingly, I am only able to transfer at a very slow rate of about 1mb/s. Assuming network connectivity is not a problem, has anyone experienced incredible slowness with SMB? Are there alternative protocols for me to use in this case between PC and MAC?

    Read the article

  • $PATH is not updated

    - by matr0sk1n
    It seems all about this was already discussed, but I can't resolve my problem. I have all necessary strings in /etc/paths /usr/bin /bin /usr/sbin /sbin /usr/local/bin in ~/.bash_profile export PATH=$PATH:/usr/local/mysql/bin export PATH=$PATH:$HOME/.rvm/bin export PATH="$(brew --prefix php54)/bin:$PATH" export PATH="$(brew --prefix)/bin:$PATH" But every time I execute echo $PATH in terminal, I get only /usr/local/bin if I put .bash_profile strings to .profile or .bashrc I have no effect.

    Read the article

  • How can I find files added to the system within X minutes of a specific time?

    - by Jack W-H
    I have done a fresh install of Mac OS X Mountain Lion today on a new MacBook. Because this was a new install, when I finally got round to configuring some of my own developer things, I was surprised to find some app had installed a binary into /usr/local/bin - a single binary called galileod. Interestingly, I can't find anything online about galileod. I had only installed the bare minimum of software at this point. Looking in the file columns I can see Date Modified was 9th November 2012, but Date Added to the system was today at 17:01. It's now 10:20PM and I can't remember which software I was installing at that point. So how do I find out which other files were installed to the system within, say, 5 minutes either side of 17:01? EDIT: I found out what galileod was by running galileod --help - it is a binary used with Fitbit to communicate with the USB dongle. So that's the mystery solved - but it would still be interesting to know how to find files added within X minutes of a timeframe for future reference.

    Read the article

  • How to disable portmap on Mac OS X

    - by Peto
    Hi, I notice the message: Firewall[313] portmap is listening from 0.0.0.0:111 proto=6 repeated on my logs ever 30 seconds. How can I disable portmap (not using NFS or anything like that so I assume I have no need for it). I already tried Lingon.app and disabled com.apple.portmap from there, but that didn't help at all as portmap is still running after i rebooted. What would be the proper way to disable portmap and stop the service without having to reboot on Mac OS X 10.6. peto

    Read the article

  • How do I create a wifi network bridge with qemu on OS X?

    - by a paid nerd
    I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

    Read the article

  • Mac Terminal.app: Force '^C' to be printed when editing current prompt, then aborting it

    - by Stefan Lasiewski
    This is the opposite of Prevent “^C” from being printed when aborting editing current prompt. I'm using Bash. When I'm editing the commandline in Bash, and I hit Control-C to abort the commandline, the '^C' character does not display. I would like to see this character. I tried commands like stty -ctlecho and stty ctlecho (which I borrowed from the other question), but this didn't work for me. This behavior seems to be true with my environment on Ubuntu, CentOS and MacOSX. This only happens within Apple's Terminal.App. If I SSH to a remote Linux or FreeBSD box, then ^C is printed. So, this is clearly just a local setting. Update: Here is the output of stty -a, as requested by @quack quixote : $ stty -a speed 9600 baud; 41 rows; 88 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel iutf8 -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; After typing stty sane, stty -a will output the following. The only difference is the parameter of -iutf8. $ stty sane $ stty -a speed 9600 baud; 41 rows; 157 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -iutf8 -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W;

    Read the article

  • USB drive dead after stopping copying process on Snow Leopard Server

    - by Anriëtte Combrink
    Hi there I was copying to a flash drive from our Snow Leopard server when I stopped the copying process half way through. The device then disappeared from the Desktop. So I unplugged it and plugged it right back in. The device just didn't show up. I unplugged it and plugged it into a Windows XP machine as well as a Windows 7 machine. On both machines, I right clicked "My Computer" and selected "Manage…". On both PC's, the device was located under Removable Storage, but had no size and no drive letter. It shows up in "My Computer", but when I choose "Format…" from the right-click menu (context menu), it says the drive could not be formatted. Can someone please advise me? The flash drives is about 5 mins old and should have no reason to be dead. I really can't loose this drive (I don't need the data on it, I just need it to work again), any help would be appreciated. Thanks in advance.

    Read the article

  • How to stop a process in Terminal [closed]

    - by AngryHacker
    Possible Duplicate: Ending a process in unix instead of interrupting it When I task in Terminal, such as ping blah.com, how do I then stop this task (other than closing the Terminal window. In Windows, you can Ctrl+Break pretty much any terminal based process, but I can't figure out the way to do it on the Mac.

    Read the article

  • What's the easiest way to migrate one Mac OS X volume to another

    - by teabot
    I want to move a volume from a smaller drive to a larger unformatted one. What is the best way to achieve this? Ideally I'd like the new volume to have the same name as the older volume as it contains user accounts, and is a destination of various symlinks that I have on other volumes. Update: I used Carbon Copy Cloner in the end and it worked perfectly. I was able to simply rename the new volume in Finder to the same name as the old volume and then powered down and removed the old drive on which the volume lived. When I restarted, the new volume seamlessly worked in place of the old volume.

    Read the article

  • Is there a way to host email with snow leopard server on site?

    - by erotsppa
    We are faced with a dilemma with using snow leopard. We want to have thr snow leopard server on site and not off site because it makes sense to have the server in the network physically for other services (file sharing, VPN, wiki etc) but our office does not have a very reliable Internet connection so it'd hard to host the email with it. We don't want to factor out the email as a separate server because we want to enjoy a single user login across everything. How do we get around this dilemma?

    Read the article

  • How to recycle/reuse/continue Time Machine for a new Mac?

    - by bmargulies
    I have been backing up a MacBook Pro to an external hard disk with Time Machine. I got a new laptop, used the firewire connector to pull the universe across to it, and started it up. It does not want to just pick up where I left off with the backups; it wants to start a new backup sequence and thus I need a ton of additional disk space. Does anyone know a way to force it to just incrementally back up to the existing backup set?

    Read the article

  • Send option/alt key press to OS X connected from Windows via VNC?

    - by sohocoke
    I recently started using a mac running Leopard Server remotely at work, using the RealVNC client to connect from my Windows XP workstation via the Leopard VNC server. As I need to do a fair amount of editing, I would like to have the keys mapped to the same positions as the macs I have been using for a long time. The Ctrl key works as Ctrl, and the Alt key works as Cmd, which is good, but I have had no success getting the Windows logo key to work as Option/Alt. It's seriously affecting my productivity in XCode and Terminal. Has anybody with the same setup solved this question, either by configuring Windows and/or the VNC client, or otherwise?

    Read the article

  • How can I convert audio files to this format?

    - by jeffamaphone
    I have a bunch of audio files that are named .wav but it seems not all .wavs are created equal. For example: $ file * file1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz file2.wav: Audio file with ID3 version 2.2.0, contains: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo file3.wav: Claris clip art? file4.wav: Audio file with ID3 version 2.2.0, contains: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo And for good measure, a non-wav: file5.m4a: ISO Media, MPEG v4 system, iTunes AAC-LC I would like to convert all of these files to the format that file1.wav is: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz What is the proper set of arguments to pass to afconvert to make that happen?

    Read the article

  • CDROM does not appear on desktop, MACOS 10.5.7

    - by Cheeso
    When I pop a CDROM into the drive of my Macbook Pro, It spins up, I hear it, but no icon appears on the desktop. (I think it's 10.5.7; actually not sure how to verify this on Mac, but I think I saw a 10.5.7 flash by somewhere). In the finder preferences, I have "Show these items on the Desktop" set to show HDs, External Disks, and CDs, DVDs, and ipods. All three of those are checked. I do see the internal HD on the desktop. In Disk utility I can see the CD/DVD hardware. It says "MATSHITA DVD-R UJ-857E...". From Disk Utility I can eject the drive. But in Finder, there is never a CD/DVD listed under "Devices". When I insert a disk, nothing happens, I cannot see it. I also cannot boot from bootable CDROMs by holding C down . Suggestions? I am not very experienced with Mac; I have used Windows for years. EDIT Two updates: I saw this article on support.apple.com, and modified the hostconfig appropriately. It did not have the AUTODISKMOUNT entry, so I added one, rebooted. Same behavior. It does not see the CDROM in Finder, does not mount it on desktop. I put an old manufactured CDROM into the drive, and voila! it showed up on the desktop. The CD that does not appear is a GNome Partition Editor Live CD, which I guess is based on debian. That CD boots in other (non-Mac) PCs. I want to use this to adjust the Bootcamp partition. Suggestions?

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >