Search Results

Search found 2453 results on 99 pages for 'recovery'.

Page 76/99 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Restoring android after ubuntu touch fails

  - by deimus

  I'm trying to restore android after playing around with ubuntu touch I follow exactly the same steps described the ubuntu's wiki page i.e. Download the factory image corresponding to your device's model and version (initial table has links). Ensure the device is connected and powered on. Extract the downloaded file and cd into the extracted directory. run adb reboot-bootloader run ./flash-all.sh (use sudo if lack of permissions on the workstation don't allow you to talk to the device). The archive is downloaded successfully, checked the sha1 checksum everything is ok. But the ./flash-all.sh fails like this sending 'bootloader' (2308 KB)... OKAY [ 0.513s] writing 'bootloader'... OKAY [ 0.292s] finished. total time: 0.805s rebooting into bootloader... OKAY [ 0.007s] finished. total time: 0.008s sending 'radio' (12288 KB)... OKAY [ 2.668s] writing 'radio'... OKAY [ 1.372s] finished. total time: 4.040s rebooting into bootloader... OKAY [ 0.009s] finished. total time: 0.009s archive does not contain 'boot.sig' archive does not contain 'recovery.sig' failed to allocate 435793780 bytes error: update package missing system.img My device is Nexus 4. Tried both 4.2.2 and 4.3 androind versions for Nexus 4 still the same. Any ideas how problem can be solved ?

  Read the article

• Correct drivers for AMD Radeon™ HD 7650M

  - by Hailwood

  So, I have a Sony Vaio sve15118fg running Ubuntu 12.10 which comes with an AMD Radeon™ HD 7650M graphics chip. This was all working fine until some updates (note sure what they were) came through, after installing my laptop now no longer boots properly, specifically: Upon attempting to boot the screen starts flicking violent striped horizontal lines. This can only be corrected via the power button. Attempting to do anything in recovery - bar dropping to a root shell - runs fsck which ends up hanging (although the system still responds there is no HDD activity). This is remedied via Ctrl+Alt+Delete to restart the system. Running fsck manually from the root shell completes successfully. I have attempted numerous things including removing all propriety drivers, Trying the two installed propriety drivers, installing the latest beta driver from AMD. etc. These all yeild various results, such as the same as above, or a gnome-fallback session, or a gnome-shell session with various flickers and graphical artifacts. So, I am wondering, what the heck do I have to do to get this to work?!? I don't really game, especially in ubuntu, so I just want a working system! not fussed about 3d acceleration of whatever...

  Read the article

• UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

  - by cristian_jordache

  Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

  Read the article

• Ranking hit after site migration

  - by Ben

  I migrated my site from its old domain over a month ago. I followed Google Webmaster Tools completely, including 301 redirects from every existing URL to the new domain, and then submitting a change of address. Traffic continued as normal, but then a few days after submitting the change of address traffic plummeted to about 20-30% of what it was previously. Most of my traffic comes from organic search, and I can see that for the keywords I had targeted before and performed well with and am now ranking much much lower for. In some cases for low competition keywords I've only lost a few places, for higher competition terms I have really suffered. This has started to pick up a bit (one of my keywords I have risen from 195 to 100 in the last week), but it seems to be a very slow process. How seamless is this process normally? I was under the impression that this would not affect my rankings too severely, but it has now been a month since the move and recovery seems to be very slow, if at all. Is it likely that I've missed something? The only change is that I have moved what was the home page to be more of a sub-page, and now in its place is a magazine-style home page. I understand that links to the old site will now be pointing to the latter which means that rankings for some keywords attributed to the old home page will take a hit, but even on other pages that seem to fit in exactly the same page structure as the previous site I have seen a drop in rankings.

  Read the article

• Why Oracle Delivers More Value than IBM in Data Integration Solutions

  - by irem.radzik(at)oracle.com

  For data integration projects, IT organization look for a robust but an easy-to-use solution, which simplifies enterprise data architecture while providing exceptional value-- not one that adds complexity and costs. This is a major challenge today for customers who are using IBM InfoSphere products like DataStage or Change Data Capture. Whereas, Oracle consistently delivers higher level value with its data integration products such as Oracle Data Integrator, Oracle GoldenGate. There are many differentiators for Oracle's Data Integration offering in comparison to IBM. Here are the top five: Lower cost of ownership Higher performance in both real-time and bulk data movement Ease of use and flexibility Reliability Complete, Open, and Integrated Middleware Offering Architectural differences between products contribute a great deal to these differences. First of all, Oracle's ETL architecture does not require a middle-tier transformation server, something IBM does require. Not only it costs more to manage an additional transformation server including energy costs, but it adds a performance bottleneck as well. In addition, IBM's data integration products are complex and often require lengthy professional services engagements to integrate. This translates to higher costs and delayed time to market. Then there's the reliability factor. Our customers choose Oracle GoldenGate over IBM's InfoSphere Change Data Capture product because Oracle GoldenGate is designed for mission-critical systems that require guaranteed data delivery and automatic recovery in case of process interruptions. On Thursday we will discuss these key differentiators in detail and provide customer examples that chose Oracle over IBM in data integration projects. Join us on Thursday Feb 10th at 11am PT to learn how Oracle delivers more value than IBM in data integration solutions.

  Read the article

• You Need BRM When You have EBS – and Even When You Don’t!

  - by bwalstra

  Here is a list of criteria to test your business-systems (Oracle E-Business Suite, EBS) or otherwise to support your lines of digital business - if you score low, you need Oracle Billing and Revenue Management (BRM). Functions Scalability High Availability (99.999%) Performance Extensibility (e.g. APIs, Tools) Upgradability Maintenance Security Standards Compliance Regulatory Compliance (e.g. SOX) User Experience Implementation Complexity Features Customer Management Real-Time Service Authorization Pricing/Promotions Flexibility Subscriptions Usage Rating and Pricing Real-Time Balance Mgmt. Non-Currency Resources Billing & Invoicing A/R & G/L Payments & Collections Revenue Assurance Integration with Key Enterprise Applications Reporting Business Intelligence Order & Service Mgmt (OSM) Siebel CRM E-Business Suite On-/Off-line Mediation Payment Processing Taxation Royalties & Settlements Operations Management Disaster Recovery Overall Evaluation Implementation Configuration Extensibility Maintenance Upgradability Functional Richness Feature Richness Usability OOB Integrations Operations Management Leveraging Oracle Technology Overall Fit for Purpose You need Oracle BRM: Built for high-volume transaction processing Monetizes any service or event based on any metric Supports high-volume usage rating, pricing and promotions Provides real-time charging, service authorization and balance management Supports any account structure (e.g. corporate hierarchies etc.) Scales from low volumes to extremely high volumes of transactions (e.g. billions of trxn per hour) Exposes every single function via APIs (e.g. Java, C/C++, PERL, COM, Web Services, JCA) Immediate Business Benefits of BRM: Improved business agility and performance Supports the flexibility, innovation, and customer-centricity required for current and future business models Faster time to market for new products and services Supports 360 view of the customer in real-time – products can be launched to targeted customers at a record-breaking pace Streamlined deployment and operation Productized integrations, standards-based APIs, and OOB enablement lower deployment and maintenance costs Extensible and scalable solution Minimizes risk – initial phase deployed rapidly; solution extended and scaled seamlessly per business requirements Key Considerations Productized integration with key Oracle applications Lower integration risks and cost Efficient order-to-cash process Engineered solution – certification on Exa platform Exadata tested at PayPal in the re-platforming project Optimal performance of Oracle assets on Oracle hardware Productized solution in Rapid Offer Design and Order Delivery Fast offer design and implementation Significantly shorter order cycle time Productized integration with Oracle Enterprise Manager Visibility to system operability for optimal up time

  Read the article

• 11gr2 DataGuard: Restarting DUPLICATE After a Failure

  - by rene.kundersma

  One of the great new features that comes in very handy when databases get larger and larger these days is RMAN's capability to duplicate from an active database and even restart a duplicate when it fails. Imagine yourself the problem I had lately; I used the duplicate from active database feature and had to wait for an hour or 6 before all datafiles where transferred.At the end of the process some error occurred because of the syntax. While this error was easily to solve I was afraid I had to redo the complete procedure and transfer the 2.5 TB again. Well, 11gr2 RMAN surprised when I re-ran my command with the following output: Using previous duplicated file +DATA/fin2prod/datafile/users.2968.719237649 for datafile 12 with checkpoint SCN of 183289288148 Using previous duplicated file +DATA/fin2prod/datafile/users.2703.719237975 for datafile 13 with checkpoint SCN of 183289295823 Above I only show a small snippet, but what happend is that RMAN smartly skipped all files that where already transferred ! The documentation says this: RMAN automatically optimizes a DUPLICATE command that is a repeat of a previously failed DUPLICATE command. The repeat DUPLICATE command notices which datafiles were successfully copied earlier and does not copy them again. This applies to all forms of duplication, whether they are backup-based (with and without a target connection) or active database duplication. The automatic optimization of the DUPLICATE command can be especially useful when a failure occurs during the duplication of very large databases. If a DUPLICATE operation fails, you need only run the DUPLICATE again, using the same parameters contained in the original DUPLICATE command. Please see chapter 23 of the 11g Release 2 Database Backup and Recovery User's Guide for more details. B.w.t. be very careful with the duplicate command. A small mistake in one of the 'convert' parameters can potentially overwrite your target's controlfile without prompting ! Rene Kundersma Technical Architect Oracle Technology Services

  Read the article

• Fix corrupt NTFS partition without Windows

  - by Capt.Nemo

  MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

  Read the article

• Dell Latitude will not boot after fresh Ubuntu 12.10 installation. Black screen

  - by James

  I have an old dell latitude d610 that I've just installed ubuntu 12.10 onto, and now unfortunately it will not complete booting up. The screen flashes purple but then fades out and dies. I'm fairly sure there is an issue with graphics drivers, as I had to turn on "nomodeset" in the options when installing off a DVD to see the installer, but I'm very new to linux and don't know terribly much at all apart from what I've read on the net. I have been able to hold down shift and bring up GRUB, and entered into recovery mode, and when I enter into the low graphics mode, the xserver log file says it can detect a screen but found none with a useable configuration, then goes on to say a fatal server error has occurred and no screen have been found at all, telling me to check a log file at "/var/log/xorg.0.log" I have no idea how to check this specific log file! Attempting to actually go further than this in low graphics mode and restart the display simply artefacts the screen. It is all very strange and annoying because I did once by random have the machine boot completely for no apparent reason, but upon restarting the issue reoccurred.

  Read the article

• Create Windows Bootloader/Boot into Windows from Ubuntu

  - by Kincaid

  I have computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I have decided I wanted to remove Ubuntu, as I hardly used it. As a stupid mistake, I deleted the Ubuntu partition before changing the bootloader to replace Grub. Whenever I know boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader solutions. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Is there any options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? In the end, I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine -- I can use EasyBCD from there. Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows. Any help would be greatly appreciated.

  Read the article

• The Next RAC, ASM and Linux Forum. May 4, 2010 Beit HP Raanana

  - by alejandro.vargas

  The next RAC, ASM and Linux forum will take place next week, you are still on time to register : Israel Oracle Users Group RAC,ASM and Linux Forum This time we will have a panel formed by Principal Oracle Advanced Customer Services Engineers and RAC experts Galit Elad and Nickita Chernovski and Senior Oracle Advanced Customer Services Engineers and RAC experts Roy Burstein and Dorit Noga. They will address the subject: 5 years of experience with RAC at Israeli Customers, lessons learned. It is a wonderful opportunity to meet with the people that is present at most major implementations and helped to solve all major issues along the last years. In addition we will have 2 most interesting Customer Presentations: Visa Cal DBA Team Leader Harel Safra will tell about their experience with scalability using standard Linux Servers for their mission critical data warehouse. Bank Discount Infrastructure DBA Uril Levin, who is in charge of the Bank Backup and Recovery Project, will speak about their Corporate Backup Solution using RMAN; that includes an end to end solution for VLDBS and mission critical databases. One of the most interesting RMAN implementations in Israel. This time I will not be able to attend myself as I'm abroad on business, Galit Elad will greet you and will lead the meeting. I'm sure you will enjoy a very, very interesting meeting. Best Regards Alejandro

  Read the article

• Grub options are not visible on booting on Samsung ATIV Book 9 Lite running Ubuntu 14.04

  - by mjwittering

  I've managed to install Ubuntu 14.04 on my new Samsung ATIV Book 9 Lite ultrabook. After updating some configuratiosn in the UEFI installation was very easy. The only questions and issue I believe I'm still experience is when booting. I believe when the laptop would be displaying the grub boot options I see the following. There is a black screen with a purple border of 10px around the screen. I'd like to know how I can update my system so that I see the grub boot manager. I've run these commands: sudo cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" The command was not possible, sudo efibootmgr.

  Read the article

• E-Business Tax Release 12 Setup - US Location Based Taxes Part 1, Prerequisities & Regimes

  - by Robert Story

  Upcoming WebcastTitle: E-Business Tax Release 12 Setup - US Location Based Taxes Part 1, Prerequisities & RegimesDate: April 28, 2010 Time: 12:00 pm EDT Product Family: Receivables Community Summary This one-hour session is part one of two on setting up a fresh implementation of US Location Based Taxes in Oracle E-Business Tax.  It is recommended for functional users who wish to understand the steps involved in setting up E-Business Tax in Release 12. Topics will include: Overview of E-Business TaxLocation setupRegime to Rate FlowTax RegimesTaxesTax StatusesTax JurisdictionsTax Recovery RatesTax RatesSubscribing the Operation Unit to a Regime to Rate FlowBrief Demonstration A short, live demonstration (only if applicable) and question and answer period will be included. Click here to register for this session....... ....... ....... ....... ....... ....... .......The above webcast is a service of the E-Business Suite Communities in My Oracle Support.For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• Can't access my accelerated hard disk from msdos after installing linux on ssd cache

  - by Chibueze Opata

  I mistakenly installed Ubuntu on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Ubuntu and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

  Read the article

• Oracle Exadata X3 announcement at Oracle Openworld

  - by Javier Puerta

  Oracle Announces Oracle Exadata X3 Database In-Memory MachineOracle Press ReleaseFourth Generation Exadata X3 Systems are Ideal for High-End OLTP, Large Data Warehouses, and Database Clouds; Eighth-Rack Configuration Offers New Low-Cost Entry Point During his opening keynote address at Oracle OpenWorld, Oracle CEO, Larry Ellison announced the Oracle Exadata X3 Database In-Memory Machine - the latest generation of its Oracle Exadata Database Machines. The Oracle Exadata X3 Database In-Memory Machine is a key component of the Oracle Cloud. Oracle Exadata X3-2 Database In-Memory Machine and Oracle Exadata X3-8 Database In-Memory Machine can store up to hundreds of Terabytes of compressed user data in Flash and RAM memory, virtually eliminating the performance overhead of reads and writes to slow disk drives, making Exadata X3 systems the ideal database platforms for the varied and unpredictable workloads of cloud computing. In order to realize the highest performance at the lowest cost, the Oracle Exadata X3 Database In-Memory Machine implements a mass memory hierarchy that automatically moves all active data into Flash and RAM memory, while keeping less active data on low-cost disks. With a new Eighth-Rack configuration, the Oracle Exadata X3-2 Database In-Memory Machine delivers a cost-effective entry point for smaller workloads, testing, development and disaster recovery systems, and is a fully redundant system that can be used with mission critical applications. Detailed info at Oracle Exadata Database Machine

  Read the article

• Checking if your SIMPLE databases need a log backup

  - by Fatherjack

  Hopefully you have read the blog by William Durkin explaining why your SIMPLE databases need a log backup in some cases. There is a SQL Server bug that means in some cases databases are marked as being in SIMPLE RECOVERY but have a log wait type that shows they are not properly configured. Please read his blog for the full explanation and a great description of how to reproduce the issue. As part of our (William happens to be my Boss) work to recover our affected databases I wrote this small PowerShell script to quickly check our servers for databases that needed the attention that William details.  cls $Servers = “Server01″,”Server02″,”etc”,”etc” foreach($Server in $Servers){ write-host “************” $server “****************”     $server = New-Object Microsoft.sqlserver.management.smo.server $Server     foreach($db in $Server.databases){         $db | where {$_.RecoveryModel -eq “Simple” -and $_.logreusewaitstatus -ne “nothing”} | select name, LogReuseWaitStatus     } } If you get any results from this query then you should consult Williams blog for the details on what action you should take. This script does give out false positives if in some circumstances depending on how busy your databases are. Hopefully this will let you check your servers quickly and if you find any problems you can reference Williams blog to understand what you need to do.

  Read the article

• Some problems after running ubuntu tweak application

  - by sachin

  I am a first time user of ubuntu 12.04 and must say that i am enjoying it. Somehow my skype on ubuntu is screwed up. The message that i am getting says (Disk IO error). Did any one face the problem before. Also i downloaded the ubuntu tweak application. After that application has clean some file, the application it self is not starting now.. I am quiet new to linux much and fear that if the tweak application has cleaned some files which were necessary. Is there anything i can fix these problems or short of auto-recovery, i have got some more leads: here seems to be the error but not sure how can i fix this. buntu-tweak:2887): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Traceback (most recent call last): File "/usr/bin/ubuntu-tweak", line 122, in from ubuntutweak.main import UbuntuTweakWindow File "/usr/lib/python2.7/dist-packages/ubuntutweak/main.py", line 40, in from ubuntutweak.preferences import PreferencesDialog File "/usr/lib/python2.7/dist-packages/ubuntutweak/preferences.py", line 32, in from ubuntutweak.factory import WidgetFactory File "/usr/lib/python2.7/dist-packages/ubuntutweak/factory.py", line 24, in from ubuntutweak.gui.widgets import * File "/usr/lib/python2.7/dist-packages/ubuntutweak/gui/widgets.py", line 10, in from ubuntutweak.settings.compizsettings import CompizSetting File "/usr/lib/python2.7/dist-packages/ubuntutweak/settings/compizsettings.py", line 3, in import ccm File "/usr/lib/python2.7/dist-packages/ubuntutweak/settings/ccm/init.py", line 1, in from Conflicts import * File "/usr/lib/python2.7/dist-packages/ubuntutweak/settings/ccm/Conflicts.py", line 25, in from Constants import * File "/usr/lib/python2.7/dist-packages/ubuntutweak/settings/ccm/Constants.py", line 77, in locale.setlocale(locale.LC_ALL, "") File "/usr/lib/python2.7/locale.py", line 539, in setlocale return _setlocale(category, locale) locale.Error: unsupported locale setting

  Read the article

• Ubuntu 12.04 - Brightness controls not working

  - by Juan Manuel Zolezzi Volpi

  Controls from "Brightness and Lock" were not working so I've tried a solution that involved changing grub, which I'm detailing below: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX="quiet splash acpi_backlight=vendor" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" After doing this, the brightness control dissapeared like you can see at http://screencloud.net/img/screenshots/6b90d56604b70cc749a632d0bc005a20.png Any ideas? Would love to be able to configure Brightness or even use apps like F.lux to regulate it automatically. Edit: I've modified the following line to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=" and now the brightness controls are back, but whatever I change the brightness remains the same. Just in case I'm using Intel H77

  Read the article

• Graphic Card Installation Failure (NV 9600M GT)

  - by Georg

  I wanted to switch from 7 to Ubuntu. Now, the first thing that holds me back is the installation of the driver for my Nvidia 9600M GT. Ubuntu recommends me 4 drivers from the "Additional Driver" Section. Now, whatever driver I install, there are four things happening RANDOMLY after rebooting: The pc freezes before seeing bootup splash The pc freezes while seeing bootup splash image (ubuntu logo with the 5 dots) The pc gets into login screen and freezes instantly (Thought the unity-bar is transparent now) The pc freezes right after beeing able to login. (While this is happening the unity-bar changes from transparent to ugly-flat-style) I also tried to install the official Nvidia .run file but after exiting the X-Server, it says the driver is not compatible with the kernel and exits installation. Can somebody help me? I really wanna get rid of Windows :( But Ubuntu drives me perfectly insane. Please answer as noobish as possible. I'm an expert Windows user, but Linux is absolutely new to me. My Specs: Ubuntu 11.10 installed from USB Stick (like 100 times now :/ because I dont know how to remove the driver in recovery mode) 9600M GT 4GB Ram Intel Centrino 2 Dual Core 2.26GHz Win 7 and Ubuntu running along side. Thank you in advance, regards.

  Read the article

• How do I boot into console mode (redux)

  - by Leo Simon

  I'm running Ubuntu 12.04. This question was asked some time ago How do I disable the boot splash screen? but the answers didn't work for me. The standard way to boot into console mode used to be to edit /etc/default/grub and set GRUB_CMDLINE_LINUX_DEFAULT="text" This worked fine until I ran the fix proposed in https://help.ubuntu.com/community/SoundTroubleshootingProcedure in order to get sound to work. Since then, I have disabled the boot-splash-screen, but I can avoid what I presume is the lightdm login prompt screen. All I want to do is disable this gui and be prompted with a console login prompt. (Shouldnt be so hard should it???) I read in three 33416 mentioned above that there was a bug in lightdm (it wasn't recognizing "text" properly as an option for GRUB_CMDLINE_LINUX_DEFAULT.) But this discussion happened more than a year ago, and it's surely been fixed. Yet my lightdm is uptodate (so I'm told when I try to update it with apt-get). As suggested in one of the above, I tried sudo update-rc.d -f lightdm remove which resulted in a hung machine. I managed to recover using recovery mode, but now I still get the gui again. Another suggestion is to edit /etc/init/lightdm.override. I've done this and set it to "manual" as suggested, but lightdm simply ignores this. Could somebody suggest how to proceed please? Thanks very much, Leo

  Read the article

• Linux Mint Maya Freezes

  - by timuçin

  Linux Mint freezes after a couple of seconds the desktop loads, in a way that I have to shut the power in order to reboot; the mouse doesn't move, ctrl+alt+f1 doesn't do anything and I think even the hard disk stops. This doesn't happen every start but when it does happen, I have to start recovery mode and run the option "dpkg", the description is "repair broken packages" or something like that. If I don't do that and start the system normally the samething happens again. I have some clues that might help: The first time I installed Mint I had to install my wireless driver manualy. The system didn't freeze before this but since I installed the driver immediately after the Mint installation that might just easily be a coincidence. Even so after I discovered the dpkg trick, for the first couple of times I did it, I found my wireless driver uninstalled and I had to reinstall it. The thing is I can't be sure that the problem is my wireless driver because the relation is not direct enough. Still letting you know what my wireless apapter might help: Realtek L 8723 The next thing I am going to do is to wait until it happens again and post the system log here.

  Read the article

• Ranking hit after WP site migration

  - by Ben

  I migrated my site from its old domain over a month ago. I followed WMT completely, including 301 redirects from every existing URL to the new domain, and then submitting a change of address. Traffic continued as normal, but then a few days after submitting the change of address traffic plummeted to about 20-30% of what it was previously. Most of my traffic come from organic search, and I can see that for the keywords I had targeted before and performed well with and am now ranking much much lower for. In some cases for low competition keywords I've only lost a few places, for higher competition terms I have really suffered. This has started to pick up a bit (one of my keywords I have risen from 195 to 100 in the last week), but it seems to be a very slow process. How seamless is this process normally? I was under the impression that this would not affect my rankings too severely, but it has now been a month since the move and recovery seems to be very slow, if at all. Is it likely that I've missed something? The only change is that I have moved what was the home page to be more of a sub-page, and now in its place is a magazine-style home page. I understand that links to the old site will now be pointing to the latter which means that rankings for some keywords attributed to the old home page will take a hit, but even on other pages that seem to fit in exactly the same page structure as the previous site I have seen a drop in rankings. Any help would be greatly appreciated. Thanks!

  Read the article

• How to know which partition is which?

  - by user206870

  Well I was just wondering what partition belongs to which. On my computer I have Windows 7 and two Ubuntu systems (it was an accident, which is why I need to know which partition is which). So how do I know which one is which?? PS here's the codes: jp@jp-Satellite-L555D:~$ sudo update-grub [sudo] password for jp: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.11.0-12-generic Found initrd image: /boot/initrd.img-3.11.0-12-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sda2 Found Windows Recovery Environment (loader) on /dev/sda3 Found Ubuntu 13.10 (13.10) on /dev/sda7 done jp@jp-Satellite-L555D:~$ sudo fdisk -l Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf6f5148e Device Boot Start End Blocks Id System /dev/sda1 * 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sda2 3074048 213421022 105173487+ 7 HPFS/NTFS/exFAT /dev/sda3 469676032 488396799 9360384 17 Hidden HPFS/NTFS /dev/sda4 213422078 469676031 128126977 5 Extended /dev/sda5 300185600 463910911 81862656 83 Linux /dev/sda6 463912960 469676031 2881536 82 Linux swap / Solaris /dev/sda7 213422080 300185599 43381760 83 Linux Partition table entries are not in disk order Thanks to whoever can answer this. Another quick question, what is the extended partition??

  Read the article

• VirtualBox: Why are some USB devices disabled?

  - by torbengb

  Overview: My Host OS is Ubuntu 10.10 and guest OS is WinXP on the VirtualBox version downloaded from Oracle including "VirtualBox 4.0 Oracle VM VirtualBox Extension Pack" so that USB passthrough works. This works in general (I was able to back up my iPhone to iTunes in the guest OS), but some devices aren't available even though they're ptrovided in the VirtualBox settings. Specifics: In the VirtualBox settings for the guest OS, there's the part where you can select which of your USB devices should be visible to the guest OS. I've selected several devices including the iPhone. So far so good. Then an iOS upgrade came along; my iPhone is now in DFU mode (or recovery mode?) and represents itself not as "iPhone" but as "iPhone (DFU mode)". I have now also added this device to the list of USB devices that the guest OS should see -- but it doesn't see this device. Questions: Am I right in expecting that the guest OS ought to see the DFU device when I add it in the VirtualBox settings? What steps do I need to take so that the guest OS will really see the DFU device?

  Read the article

• Oracle University Seminars April/May/June 2012

  - by A&C Redaktion

  Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle University's Expert Seminars are exclusive events delivered by top experts with years of experience in working with Oracle products. The seminars topics cover the breadth of the Oracle portfolio and are aimed at helping you to get the most of your Oracle products and to stay connected with new technologies. We currently have the following events scheduled: RAC Performance Tuning Online with Arup Nanda - 30 Apr 2012 Understanding Explain Plans & Index Utilization Online with Dan Hotka - 8-9 May 2012 Writing Optimal SQL & Troubleshooting & Tuning with Jonathan Lewis, Düsseldorf, 9-10 May 2012 Flashback Techniques in Oracle11g with Carl Dudley, München, 14 May 2012 Minimize Downtime with Rolling Upgrade using Data Guard with Uwe Hesse, München, 16 May 2012 Enterprise Business Intelligence 11g Advanced Development Online with Mark Rittman – 24-25 May Mastering Backup & Recovery with Francisco Munoz Alvarez, Düsseldorf, 29-30 May 2012 Real World Java EE 6 – Re-thinking Best Practice with Adam Bien, München, 15 Jun 2012

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >