Search Results

Search found 3173 results on 127 pages for 'satellite navigation'.

Page 76/127 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • No sound out of headphone port on laptop

    - by Thanatos
    I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

    Read the article

  • Wireless card overheating?

    - by Sidney
    Ok, so I've had my laptop for several years (I wanna say 4, but possibly more), it's a Toshiba Satellite. I'm running Linux mint 15, and am having a strange new issue, after several hours of running my wireless stops. It can SEE wireless networks, but refuses to connect to any of them. (On a sidenote, connecting to a router with a cable at this point works fine) The fact that it can SEE the networks make me think the card is in good condition, and it's software related The fact that it works for several hours before booting me makes me think perhaps the transmitter is getting too hot. I don't use my laptop in dusty environments, and keep it on an elevated surface (alternatively, I actively try not to let it sit on soft surfaces where the vents get covered). I spray out the cpu fan about once a year with compressed air about once a year, so I really don't think the insides should be too dirty. Finally, unfortunately, sensors only gives me CPU temps, but they run about 40-50 degrees C, which from my understanding is perfectly normal for an I3. Does anyone have any suggestions on what I can do to determine the root cause of this?

    Read the article

  • Step by step instructions to make dos "see" and "access" usb hard drives

    - by Gireesh Venkateswaran
    I am stuck with an USB external hard drive (Maxtor 1 Touch) 750GB that crashed. I have photos and home movies (my son's birth, first birthday etc) that are very important to me. I am given to understand that Spinrite is a very good tool to use, but It does not come "with out of the box" capabilities to access USB drives. If I open the case to get the HDD out from my External HDD, I would compromise the warrenty and I would not be able to exchange the Drive. I have done a bit of research and have the drivers that could help. But the bit I am missing is, How to put it all together. I would really appreciate it if some one can give me step by step instruction where I can create a dos boot cd that can load the drivers and assign a drive letter to it so that I can make Dos "See" the external hard drive. I have a Toshiba satellite laptop that runs Windows XP (Home). It does not have a floppy drive. I will be greatful to your help in the regard.

    Read the article

  • No sound out of headphone port

    - by Thanatos
    I cannot get sound out of the headphone port. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

    Read the article

  • How To Boot with "mem=1024m" Argument using GRUB - Ubuntu 10.04

    - by nicorellius
    I am still working on this question. This new one is a different question so I thought it would be good to post a new question. Is this the proper protocol or should I have just edited the other question? I'm running Ubuntu 10.04 with the kernel 2.6.32-22-generic on a Toshiba Satellite laptop. When I enter the GRUB menu (I have Ubuntu 9.10 installed as well), I can choose which kernel to boot. I use scroll down to the one I want and press "e" and I expect to be able to enter mem=1024m and force the kernel to use this much memory. But when I run cat /proc/meminfo or look in the process manager after booting wth this argument I still see all the RAM: ~2 GB. Am I using this boot argument incorrectly? The boot configuration (before I add anything) looks like this: insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 10270f21-1c42-494b-bd3f-813c23f6d\ 518 linux /boot/vmlinuz-2.6.32-22-generic root=UUID=10270f21-1c42-494b-b\ d3f-813c23f6d518 ro quiet splash initrd /boot/initrd.img-2.6.32-22-generic The way I did this was that I added the mem=1024m after the last line and pressed Ctrl+x (Emacs save and boot the kernel) and the system booted. I tried adding mem=1024m to the end and the beginning of this list and it appeared to not change the RAM allocation.

    Read the article

  • Microphone doesn't work

    - by mandy
    I'm having a trouble with my built in microphone. Even if I use headphone with mic, it doesn't really work. The weird thing is, if I clap the green lines of the speaker icon jumps, but if I speak it doesn't. I have also tried some recordings, but I can not hear myself and adjusting the volume didn't help at all. I tried to restore it, still no change. I have updated it in the device manager, but it said there that it's up to date and the devices are working properly. Until I decided to recover the whole system (wherein I pressed zero and switch on button) to my surprise, the settings became different, most programs were deleted, even my files. It's like it was formatted and I'm so sad that the mic was not fixed. I really don't know what to do now. My laptop model is Toshiba satellite m840. I want to it return to its settings/set up just before I Recover the system and bring back all the programs that we're installed and of course, most of all, to fix my microphone so I can use Skype again and other video calling application.. I hope someone could help me. Thanks a lot!

    Read the article

  • Laptop keyboard stopped functioning properly

    - by galdikas
    Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

    Read the article

  • Corrupted Laptop - Transfer Data Without My Computer (explorer.exe) Using Command Line

    - by nicorellius
    I have a laptop (Toshiba Satellite) that is pretty messed up. The person this belongs too already replaced it with a new machine. My job is to transfer all her data from this machine to disk so that I can transfer it to her. She doesn't want to lose any data (understandably so). Any operation I attempted (i.e., double clicking on any folder icon, like My Documents, My Computer, etc) resulted din a complete crash. The only good news is that I can actually start and navigate around using the command line. Also, I can access the internet. I have a network, so if I can map the drives I can get this thing figured out (hopefully). Also, I tried a USB drive but I couldn't figure out how to access it from the command line. Two questions (I need to use the command line for these): How would I go about accessing the USB drive and how can I map the shared drives on my network so that I may cd to that directory for use of the copy command?

    Read the article

  • Retrieving saved checkboxes' name and values from database

    - by sermed
    I have a form with checkboxes, each one has a value. When the registered user select any checkbox the value is incremented (the summation) and then then registred user save his selection of checkbox if he satisfied with the result of summation into database all this work fine ...i want to enable the registred user to view his selection history by retriving and displaying the checkboxes he selected in a page with thier values ... How I can do that? I'm just able to save the selected checkboxes as choice 1, choice 2, for example .. I want to view the selected checkboxes that is saved in database as the appear in the page when the user first select them: for example if the registred user selects these 3 options LEAD DEEP KEEL (1825) FULLY BATTENED MAINSAIL (558) TEAK SIDE DECKS (2889) They will be saved as for example (choice1, choice2, choice3). But if he want to view selected checkboxes the appear exactly as first he selects them: LEAD DEEP KEEL (1825) FULLY BATTENED MAINSAIL (558) TEAK SIDE DECKS (2889) This is my user table: $query="CREATE TABLE User( user_id varchar(20), password varchar(40), user_type varchar(20), firstname varchar(30), lastname varchar(30), street varchar(50), city varchar(50), county varchar(50), post_code varchar(10), country varchar(50), gender varchar(6), dob varchar(15), tel_no varchar(50), vals varchar(50), email varchar(50))"; and the code to inser the options selected to database <?php include("databaseconnection.php"); $str = ''; foreach($_POST as $key => $val) if (strpos($key,'choice') !== false) $str .= $key.','; $query = "INSERT INTO User (vals) VALUES('$str')"; $result=mysql_query($query,$conn); if ($result) { (mysql_error(); } else { echo " done"; } ?> And this is my form: function checkTotal() { document.listForm.total.value = ''; var sum = 0; for (i=0;i <form name="listForm" method="post" action="insert_options.php" > <TABLE cellPadding=3 width=600 border=0> <TBODY> <TR> <TH align=left width="87%" bgColor=#b0b3b4><SPAN class=whiteText>Item</SPAN></TH> <TH align=right width="13%" bgColor=#b0b3b4><SPAN class=whiteText>Select</SPAN></TH></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>General</B></SPAN></TD></TR> <TR> <TD bgcolor="#c4c8ca"><SPAN class=normalText >TEAK SIDE DECKS (2889)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="2889" type="checkbox" onchange="checkTotal()" /></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>LEAD DEEP KEEL (1825)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1825" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>FULLY BATTENED MAINSAIL (558)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="558" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>HIGH TECH SAILS FOR CONVENTIONAL RIG (1979)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1979" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>IN MAST REEFING WITH HIGH TECH SAILS (2539)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="2539" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPlNNAKER GEAR (POLE LINES DECK FITTINGS) (820)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="820" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPINNAKER POLE VERTICAL STOWAGE SYSTEM (214)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="214" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>GAS ROD KICKER (208)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="208" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SIDE RAIL OPENINGS (BOTH SIDES) (392)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="392" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPRING CLEATS MIDSHIPS -ALUMIMIUM (148)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="148" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ELECTRIC ANCHOR WINDLASS (1189)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1189" type="checkbox" onchange="checkTotal()"> </TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ANCHOR CHAIN GALVANISED (50m) (202)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="202" type="checkbox" onchange="checkTotal()"> </TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ANCHOR CHAIN GALVANISED (50m) (1141)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1141" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>NAVIGATION & ELECTRONICS</B></SPAN></TD></TR> <TR> <TD bgcolor="#c4c8ca"><SPAN class=normalText >WIND VANE (STAINLESS STEEL)(41)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="41" type="checkbox" onchange="checkTotal()" /></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>RAYMARINE ST6O LOG & DEPTH (SEPARATE UNITS)(226)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="226" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>ENGINES & ELECTRICS</B></SPAN></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SHORE SUPPLY (220V) WITH 3 OUTLETS (EXCLUDJNG SHORE CABLE) (327)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="327" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>3rd BATTERY(14OA/H)(196)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="196" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>24 AMP BATTERY CHARGER (475)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="475" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>2 BLADED FOLDING PROPELLER (UPGRADE)(299)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="299" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>BELOW DECKS/DOMESTIC</B></SPAN></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>WARM WATER (FROM ENGINE & 220V)(749)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="749" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SHOWER IN AFT HEADS WITH PUMPOUT(446)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="446" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>DECK SUCTION DISPOSAL FOR HOLDINGTANK(166)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="166" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>REFRIGERATED COOLBOX (12V)(666)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="666" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>LFS SAFETY PACKAGE (COCKPIT HARNESS POINTS STAINLESS STEEL JACKSTAYS)(208)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="208" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>UPHOLSTERY UPGRADE IN SALOON (SUEDETYPE)(701)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="701" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>NAVIGATION ELECTRONICS & ELECTRICS</B></SPAN></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>VHF RADIO AERIAL CABLED TO NAVIGATION AREA(178)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="178" type="checkbox" onchange="checkTotal()"></TD></TR> </table>

    Read the article

  • Multiple errors while adding searching to app

    - by Thijs
    Hi, I'm fairly new at iOS programming, but I managed to make a (in my opinion quite nice) app for the app store. The main function for my next update will be a search option for the app. I followed a tutorial I found on the internet and adapted it to fit my app. I got back quite some errors, most of which I managed to fix. But now I'm completely stuck and don't know what to do next. I know it's a lot to ask, but if anyone could take a look at the code underneath, it would be greatly appreciated. Thanks! // // RootViewController.m // GGZ info // // Created by Thijs Beckers on 29-12-10. // Copyright 2010 __MyCompanyName__. All rights reserved. // #import "RootViewController.h" // Always import the next level view controller header(s) #import "CourseCodes.h" @implementation RootViewController @synthesize dataForCurrentLevel, tableViewData; #pragma mark - #pragma mark View lifecycle // OVERRIDE METHOD - (void)viewDidLoad { [super viewDidLoad]; // Go get the data for the app... // Create a custom string that points to the right location in the app bundle NSString *pathToPlist = [[NSBundle mainBundle] pathForResource:@"SCSCurriculum" ofType:@"plist"]; // Now, place the result into the dictionary property // Note that we must retain it to keep it around dataForCurrentLevel = [[NSDictionary dictionaryWithContentsOfFile:pathToPlist] retain]; // Place the top level keys (the program codes) in an array for the table view // Note that we must retain it to keep it around // NSDictionary has a really useful instance method - allKeys // The allKeys method returns an array with all of the keys found in (this level of) a dictionary tableViewData = [[[dataForCurrentLevel allKeys] sortedArrayUsingSelector:@selector(caseInsensitiveCompare:)] retain]; //Initialize the copy array. copyListOfItems = [[NSMutableArray alloc] init]; // Set the nav bar title self.title = @"GGZ info"; //Add the search bar self.tableView.tableHeaderView = searchBar; searchBar.autocorrectionType = UITextAutocorrectionTypeNo; searching = NO; letUserSelectRow = YES; } /* - (void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; } */ /* - (void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; } */ /* - (void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; } */ /* - (void)viewDidDisappear:(BOOL)animated { [super viewDidDisappear:animated]; } */ //RootViewController.m - (void) searchBarTextDidBeginEditing:(UISearchBar *)theSearchBar { searching = YES; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; //Add the done button. self.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(doneSearching_Clicked:)] autorelease]; } - (NSIndexPath *)tableView :(UITableView *)theTableView willSelectRowAtIndexPath:(NSIndexPath *)indexPath { if(letUserSelectRow) return indexPath; else return nil; } //RootViewController.m - (void)searchBar:(UISearchBar *)theSearchBar textDidChange:(NSString *)searchText { //Remove all objects first. [copyListOfItems removeAllObjects]; if([searchText length] &gt; 0) { searching = YES; letUserSelectRow = YES; self.tableView.scrollEnabled = YES; [self searchTableView]; } else { searching = NO; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; } [self.tableView reloadData]; } //RootViewController.m - (void) searchBarSearchButtonClicked:(UISearchBar *)theSearchBar { [self searchTableView]; } - (void) searchTableView { NSString *searchText = searchBar.text; NSMutableArray *searchArray = [[NSMutableArray alloc] init]; for (NSDictionary *dictionary in listOfItems) { NSArray *array = [dictionary objectForKey:@"Countries"]; [searchArray addObjectsFromArray:array]; } for (NSString *sTemp in searchArray) { NSRange titleResultsRange = [sTemp rangeOfString:searchText options:NSCaseInsensitiveSearch]; if (titleResultsRange.length &gt; 0) [copyListOfItems addObject:sTemp]; } [searchArray release]; searchArray = nil; } //RootViewController.m - (void) doneSearching_Clicked:(id)sender { searchBar.text = @""; [searchBar resignFirstResponder]; letUserSelectRow = YES; searching = NO; self.navigationItem.rightBarButtonItem = nil; self.tableView.scrollEnabled = YES; [self.tableView reloadData]; } //RootViewController.m - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { if (searching) return 1; else return [listOfItems count]; } // Customize the number of rows in the table view. - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if (searching) return [copyListOfItems count]; else { //Number of rows it should expect should be based on the section NSDictionary *dictionary = [listOfItems objectAtIndex:section]; NSArray *array = [dictionary objectForKey:@"Countries"]; return [array count]; } } - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { if(searching) return @""; if(section == 0) return @"Countries to visit"; else return @"Countries visited"; } // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; } // Set up the cell... if(searching) cell.text = [copyListOfItems objectAtIndex:indexPath.row]; else { //First get the dictionary object NSDictionary *dictionary = [listOfItems objectAtIndex:indexPath.section]; NSArray *array = [dictionary objectForKey:@"Countries"]; NSString *cellValue = [array objectAtIndex:indexPath.row]; cell.text = cellValue; } return cell; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { //Get the selected country NSString *selectedCountry = nil; if(searching) selectedCountry = [copyListOfItems objectAtIndex:indexPath.row]; else { NSDictionary *dictionary = [listOfItems objectAtIndex:indexPath.section]; NSArray *array = [dictionary objectForKey:@"Countries"]; selectedCountry = [array objectAtIndex:indexPath.row]; } //Initialize the detail view controller and display it. DetailViewController *dvController = [[DetailViewController alloc] initWithNibName:@"DetailView" bundle:[NSBundle mainBundle]]; dvController.selectedCountry = selectedCountry; [self.navigationController pushViewController:dvController animated:YES]; [dvController release]; dvController = nil; } //RootViewController.m - (void) searchBarTextDidBeginEditing:(UISearchBar *)theSearchBar { //Add the overlay view. if(ovController == nil) ovController = [[OverlayViewController alloc] initWithNibName:@"OverlayView" bundle:[NSBundle mainBundle]]; CGFloat yaxis = self.navigationController.navigationBar.frame.size.height; CGFloat width = self.view.frame.size.width; CGFloat height = self.view.frame.size.height; //Parameters x = origion on x-axis, y = origon on y-axis. CGRect frame = CGRectMake(0, yaxis, width, height); ovController.view.frame = frame; ovController.view.backgroundColor = [UIColor grayColor]; ovController.view.alpha = 0.5; ovController.rvController = self; [self.tableView insertSubview:ovController.view aboveSubview:self.parentViewController.view]; searching = YES; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; //Add the done button. self.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(doneSearching_Clicked:)] autorelease]; } // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations. return YES; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Relinquish ownership any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Relinquish ownership of anything that can be recreated in viewDidLoad or on demand. // For example: self.myOutlet = nil; } - (void)dealloc { [dataForCurrentLevel release]; [tableViewData release]; [super dealloc]; } #pragma mark - #pragma mark Table view methods // DATA SOURCE METHOD - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } // DATA SOURCE METHOD - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { // How many rows should be displayed? return [tableViewData count]; } // DELEGATE METHOD - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // Cell reuse block static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } // Configure the cell's contents - we want the program code, and a disclosure indicator cell.textLabel.text = [tableViewData objectAtIndex:indexPath.row]; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; return cell; } //RootViewController.m - (void)searchBar:(UISearchBar *)theSearchBar textDidChange:(NSString *)searchText { //Remove all objects first. [copyListOfItems removeAllObjects]; if([searchText length] &gt; 0) { [ovController.view removeFromSuperview]; searching = YES; letUserSelectRow = YES; self.tableView.scrollEnabled = YES; [self searchTableView]; } else { [self.tableView insertSubview:ovController.view aboveSubview:self.parentViewController.view]; searching = NO; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; } [self.tableView reloadData]; } //RootViewController.m - (void) doneSearching_Clicked:(id)sender { searchBar.text = @""; [searchBar resignFirstResponder]; letUserSelectRow = YES; searching = NO; self.navigationItem.rightBarButtonItem = nil; self.tableView.scrollEnabled = YES; [ovController.view removeFromSuperview]; [ovController release]; ovController = nil; [self.tableView reloadData]; } // DELEGATE METHOD - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // In any navigation-based application, you follow the same pattern: // 1. Create an instance of the next-level view controller // 2. Configure that instance, with settings and data if necessary // 3. Push it on to the navigation stack // In this situation, the next level view controller is another table view // Therefore, we really don't need a nib file (do you see a CourseCodes.xib? no, there isn't one) // So, a UITableViewController offers an initializer that programmatically creates a view // 1. Create the next level view controller // ======================================== CourseCodes *nextVC = [[CourseCodes alloc] initWithStyle:UITableViewStylePlain]; // 2. Configure it... // ================== // It needs data from the dictionary - the "value" for the current "key" (that was tapped) NSDictionary *nextLevelDictionary = [dataForCurrentLevel objectForKey:[tableViewData objectAtIndex:indexPath.row]]; nextVC.dataForCurrentLevel = nextLevelDictionary; // Set the view title nextVC.title = [tableViewData objectAtIndex:indexPath.row]; // 3. Push it on to the navigation stack // ===================================== [self.navigationController pushViewController:nextVC animated:YES]; // Memory manage it [nextVC release]; } /* // Override to support conditional editing of the table view. - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the specified item to be editable. return YES; } */ /* // Override to support editing the table view. - (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { if (editingStyle == UITableViewCellEditingStyleDelete) { // Delete the row from the data source. [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; } else if (editingStyle == UITableViewCellEditingStyleInsert) { // Create a new instance of the appropriate class, insert it into the array, and add a new row to the table view. } } */ /* // Override to support rearranging the table view. - (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { } */ /* // Override to support conditional rearranging of the table view. - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the item to be re-orderable. return YES; } */ @end

    Read the article

  • OpenVPN slow with Firewall enabled on Zyxel ZyWall USG-100

    - by aleroot
    I have an OpenVPN server on a Linux machine, after installing a ZyWall USG-100 I'm experiencing extremely slowness navigating web servers on my remote LAN through the VPN connection, while accessing the web interface of the ZyWall is fast. I have configured everything : the Virtual Server for the OpenVPN Server, the static route as with the replaced router that I had before installing the ZyWall Today. I even added a rule to the firewall that allows connection to the OpenVPN Server machine : but navigation on the LAN through the VPN still slow, it seems that the Firewall is blocking packages, since if I disable the firewall on the USG-100 everything works fast as usual, while with the firewall enabled it is extremely slow. Why ? Do I need to add some other rule to the firewall to speed up ?

    Read the article

  • Dvorak hotkey remapping in vim, worth it?

    - by Bryan Ward
    I've been trying to learn the dvorak keyboard layout of late and I have been making some good progress this time around. The trouble I am finding now is that all of my hotkeys are all in the wrong places. As a vim user this is particularly troubling. I have found good resources to switch the bindings back so that they are in the places in vim, but I wonder if this is worth it. I also use set -o vi in my ~/.zshrc file so that I can use the familiar bindings in the terminal as well. hjkl navigation is also featured in a number of other applications such as less. For those of you out there who have successfully made the switch, is it worth remapping things to be familiar again, or is it better in the long run to just deal with weirdly placed hotkeys?

    Read the article

  • Viewing CHM Files Across The Network in Windows 7

    - by Lukas Cenovsky
    When I try to open .chm help from a network shared drive I receive the following error: Navigation to the webpage was canceled. I know about the .reg solution described on KB896054 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions] "MaxAllowedZone"=dword:00000001 but it does not work in Windows 7. Any ideas how to make .chm help available from the network drives? Edit: I have the network path mapped to P: drive letter. My program runs from P: and I want to see the help for it. Copying the program to local drive is not a solution for me.

    Read the article

  • Issues importing PST into Archive Mailbox Exchange 2013

    - by atomicharri
    I've completed a successful mailbox import request into the archive mailbox for a particular user. There are no errors to speak of and the size of the archive mailbox has grown to the expected size after import (approximately 6GB). However, in OWA I can't see any of the mail folders inside the archive mailbox, only Deleted Items and RSS feeds folders. However if I run some cmdlets to list the contents of the Archive Mailbox\Inbox folder in the Exchange Shell, the full list of subfolders will come up. If I do a mail item search on the archive mailbox, emails from those individual folders appear as search results! I just can't see the folders in the navigation pane and hence cannot browse any of my old emails. Any help would be appreciated.

    Read the article

  • Apache rewrite rules not causes a download dialog of the PHP file

    - by Shaihi
    I have Apache 2.2.17 using the WAMPServer 2.1 installation. I am debugging a website fully local on my computer. I have the following rule in the .htaccess: # Use PHP5 Single php.ini as default AddHandler application/x-httpd-php5s .php Options +FollowSymlinks RewriteEngine on Rewritebase / RewriteRule ^bella/(.*)/(.*)$ beauty.php?beauty_id=$1 [L] RewriteRule ^(argentina|brasil|chile|colombia|espana|mexico|rep_dominicana|uruguay|venezuela|peru|bolivia|cuba|ecuador|panama|paraguay|puerto_rico)/$ country.php?name=$1 [L] RewriteRule ^(argentina|brasil|chile|colombia|espana|mexico|rep_dominicana|uruguay|venezuela|peru|bolivia|cuba|ecuador|panama|paraguay|puerto_rico)/(hi5|facebook|twitter|orkut)/$ socialnetw.php?country=$1&category=$2 [L] The problem When I enable this rule and try to access http://localhost/index.php using FF I get a download dialog for the PHP file. If I comment the Rewrite* part in the .htaccess file then the index.php file loads fine, but navigation in the page is broken...

    Read the article

  • Windows 7 (32bit) not adding favorites to Windows Explorer

    - by bsigrist
    I am attempting to add several locations on my disk to my "Favorites" in Windows Explorer. I have used this feature in the 64bit version of Windows 7 without a problem, but it does not seem to work in this install. Here is my methodology so far. 1.) Go to a location in Windows Explorer "C:\users\Benjamin" 2.) Right click on the "favorites" in the left hand folder navigation window and select "Add current location to Favorites" It does not fire an error, but the location does not appear under favorites. What might be happening here to prevent "favorites" from populating?

    Read the article

  • Redirected to piratenpartji.nl. What can I do?

    - by Luke
    a few hours ago, I found a link to Kickass Torrent, which is blocked in my country, Italy and went for it. The link worked just fine but wasn't able to save anything. I renounced and continued normal navigation. I then noticed that everytime I try to access some pages, for instance google.com (but not Google.it) I receive a warning from Chrome that I'm being redirected through piratenpartji.nl Since I found a similar topic here on 'superuser' I tried what was proposed in the solution, namely shutting down adblock and trying again or trying Incognito mode. Nevertheless, no result. I performed a search with both Avira and Spybot SD but except for a couple cookies from other origin nothing came up. What do you suggest I do? Thanks in advance, feel free to ask any info that might be necessary Luke

    Read the article

  • rewrite rule does not rewrite url as expected

    - by user1708687
    I have a problem with a CMS website, that normally generates readable urls. Sometimes it happens that navigation links are shown as www.domain.com/22, which results in an error, instead of www.domain.com/contact. I have not found a solution for this yet, but the page is working if the url is www.domain.com/index.php?id=22. Therefore, I'm trying to rewrite www.domain.com/22 to www.domain.com/index.php?id=22 and I have used this rewrite rule: RewriteRule ^([1-9][0-9]*)$ index.php?id=$1 [NC] I tested it using http://htaccess.madewithlove.be and here it shows the correct result, but on the website no rewrite is happening.

    Read the article

  • Sharepoint 2010 site access denied for Active Dirtectory group member

    - by Mia
    I created a blank site in Sharepoint 2010 and in Site Actions-->Permissions I removed all the users and added an Active directory group which has me as member and few others. After this I logged in as myself and it does not show that Portal on Left navigation. If I try to browse to that portal as myself it says "access denied"? I don't know where I am wrong. I am stuck from yesterday. If some one could help it would be great. Thanks.

    Read the article

  • Is there a quick way to remove browser decorations

    - by Dane
    I'm finding that more and more applications use browsers as their user interface and I am caught in a dilemma. When browsing I want a browser window to have browser buttons, navigation icons, etc. When I'm using the browser for an application like twitter or yammer then I don't need those and having them just reduces the application area. I would rather save the vertical space and have a very sparse undecorated window. The problem is it does not seem easy to do this. My initial thought was to just install two different browsers. For example use Firefox with all the toolbars and then set IE to show no toolbars. I think this is ok but I would like a cleaner solution. Maybe a plugin in Firefox that turns everything off easily or something.

    Read the article

  • Make favorites always visible in Windows Explorer

    - by gix
    Vista introduced the favorites in the navigation pane of Windows Explorer. In Windows 7 I immediately noticed that the favorites don't have a separate pane at the top anymore. See this image for a comparison. So to access the favorites (which I do a lot, I love that feature!) I always have to scroll to the top first which is quite annoying. Is there any way to restore the old behavior? I can't believe that they went a step backwards here.

    Read the article

  • OSX Keyboard Shortcuts in Dialogs?

    - by Dan Fabulich
    On Windows, every dialog box includes underlined letters that you can activate using the Alt key. I use these "Alt" keyboard shortcuts all the time; I'm missing them as I'm trying to switch to OSX. On OSX, all I can find is Tab navigation, which requires you to press Tab seven or eight times to get anywhere in most dialog boxes. (And even that is hidden by default: you have to enable "Full keyboard access" in the "Keyboard & Mouse" control panel to be able to Tab between buttons.) Is there some way I can get something like the Windows Alt accelerators for OSX dialogs? I'm willing to write Automator code, download/purchase software, etc. Specifically, I'm imagining maybe something where you do some shortcut command and then start typing the name of the button, and hit Enter to push the button...?

    Read the article

  • Opening offline version of Microsoft Books Online in browser

    - by ercan
    I often use the MSDN website for language reference. In order to make navigation faster, I downloaded the offline version of SQL Server 2005 Books Online from here: http://www.microsoft.com/downloads/details.aspx?familyid=be6a2c5d-00df-4220-b133-29c1e0b6585f&displaylang=en The reason why it is 137MB is that it comes with its own GUI, which, not surprisingly, is rather poor! Apparently though, the pages are written in html. The URIs look like: ms-help://MS.SQLCC.v9/sqlcc9/html/674933a8-e423-4d44-a39b-2a997e2c2333.htm . I can open the URI in IE, but with errors. Do you know if I can open them with Firefox and how? Or is there a simple HTML version of "MS Books Online", for example in a ZIP file?

    Read the article

  • Terminal Services - MS Access Frequently "Not Responding"

    - by jonfhancock
    Exposition: We use a program built in MS Access that I serve via Terminal Services. I just installed a new TS Server with a Quad Core 2.6GHz Xeon, 8GB RAM, and 4 SATA drives in a RAID 0. In installed Server 2008 R2 (64bit obviously). It's only role is TS. The problem: With just a few sessions (under 10), I start getting frequent Not Responding messages in each session. When it happens, the users aren't doing anything particularly taxing, just form navigation and simple insert queries. I can live with some stalls, but it is visually jarring in WS08 because the screen goes gray, and it presents a dialog offering to wait or close with some other options. Questions: Any suggestions for improving performance and reducing hangs? Is it possible to disable the dialog (always wait) and screen graying?

    Read the article

  • Mouse cursor in Terminal?

    - by marienbad
    I use Mac OS X Terminal.app. But the answer to this would probably apply to any typical UNIX-ish terminal emulator in a graphical environment. Question -- what do I do to: Use my mouse cursor to click on a character-position in the current line of the terminal, and have the terminal's cursor jump to that spot? Typically, you have to hold down an arrow key to move to the correct cursor position. If you're pasting in a long string of text at the shell prompt, or working in an editor like VI, this can take a long time. I know editors have other navigation keys like jump-words, but I like my mouse cursor.

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >