Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 76/516 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• ISO Files to USB &ndash; The Cheap and Easy Way

  - by RonGarlit

  (DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

  Read the article

• Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

  - by user207207

  Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• How can I make fsck run non-interactively at boot time?

  - by Nelson

  I have a headless Ubuntu 12.04 server in a datacenter 1500 miles away. Twice now on reboot the system decided it had to fsck. Unfortunately Ubuntu ran fsck in interactive mode, so I had to ask someone at my datacenter to go over, plug in a console, and press the Y key. How do I set it up so that fsck runs in non-interactive mode at boot time with the -y or -p (aka -a) flag? If I understand Ubuntu's boot process correctly, init invokes mountall which in turn invokes fsck. However I don't see any way to configure how fsck is invoked. Is this possible? (To head off one suggestion; I'm aware I can use tune2fs -i 0 -c 0 to prevent periodic fscks. That may help a little but I need the system to try to come back up even if it had a real reason to fsck, say after a power failure.) In response to followup questions, here's the pertinent details of my /etc/fstab. I don't believe I've edited this at all from what Ubuntu put there. UUID=3515461e-d425-4525-a07d-da986d2d7e04 / ext4 errors=remount-ro 0 1 UUID=90908358-b147-42e2-8235-38c8119f15a6 /boot ext4 defaults 0 2 UUID=01f67147-9117-4229-9b98-e97fa526bfc0 none swap sw 0 0

  Read the article

• Failure to Boot 12.04 on HP AMD Dual Core. Rescue Mode doesn't even come up

  - by L R Bellmore Jr

  I have 12.04 installed on HP 64 bit dual core AMD laptop.. worked great until about 1-2 months ago.. now takes 1/2 hour to 25 hours to boot if it ever does. A minor number of times I get the HP logo with hash lines on screen and it just hangs... When it finally boots 95% it will run until I turn it off days later to see if any of the upgrades fixed the problem. Currently, if it boots, it is random.. .left on over night .. 2 nights ago and came back to a HP logo with Hash Lines horizontal across the screen.. frozen.. rebooted back to black screen.. no HP logo... Most often when it does boot.. no HP logo.. just cursor shows up.. and then I know it will finally load... computer has been made worthless and it is my work computer..HELP PLEASE... Rescue Mode can't be invoked.. computer doesnt respond.. has shown up 3 times in about 100 and when I have tried it... 1 time it resulted in a boot up but then failed in a couple hours.

  Read the article

• How to boot from toshiba recovery partition after installing ubuntu 14.04.1? [duplicate]

  - by Hunter Dotson

  This question already has an answer here: How to remove Ubuntu and put Windows back on? 14 answers Im new here and have not found a post even close to this so here it is: i installed ubuntu 14.04.1 over my Windows 7 Home Premium installation. didn't loose any important data.skip to when the install is done i tried out ubuntu and got sick of it after a while.(the try ubuntu option was greyed out) i got sick of ubuntu after about an hour and i tried to boot into my recovery partition. That's where im running into trouble: you are supposed to hold down the numerical "0" while turning on the power. but it just proceeds to load grub/ubuntu and does not even try to boot into the recovery partition. "000000000000" is all i get from holding it down I know the recovery partition is intact,but i cant access it,even when setting a boot flag on it. i am stumped and i really need answers thanks in advance! specs Toshiba satellite l775 intel core i3 dual core processor original os:windows 7 home premium 64 bit sp1 let me know if you need more info!

  Read the article

• How can I triple boot Xubuntu, Ubuntu and Windows?

  - by ag.restringere

  Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

  Read the article

• Grub gives messages about the boot sector being used by other software. What should I do?

  - by Bobble

  This only happens with one of my computers. It is an elderly laptop that has had a long and varied history with several operating systems, but in its retirement it is acting as a server for my home network using Ubuntu 12.04. It is a single-boot system, there are no other systems installed. Every so often, whenever there is a grub upgrade, I notice a message like this: Setting up grub-common (1.99-21ubuntu3.4) ... Installing new version of config file /etc/grub.d/00_header ... Setting up grub2-common (1.99-21ubuntu3.4) ... Setting up grub-pc-bin (1.99-21ubuntu3.4) ... Setting up grub-pc (1.99-21ubuntu3.4) ... /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Should I be worried about this? What (if anything) should I do about it?

  Read the article

• How can I speed up boot on one of my machines?

  - by Korneel Bouman

  I have a Gateway all in one machine (2 gig Intel Core 2 Duo T7250 dual core processor, 2 gig RAM - full specs) on which I installed 10.10. Once it has booted it's fine, but it takes forever to boot. This is what happens: 1. Boot starts with cursor flashing for about 10-15 seconds 2. Cursor disappears for 1.5 - 2 minutes 3. Cursor reappears, blinks a few seconds more, boot finishes in another 10 seconds 4. Login screen I have another machine with marginal better specs that boots up in no time (basically the above minus the two minute delay). Things I've done: enabled verbose mode for grub nothing is showing until after 2 minute pause. checked syslog last message before pause is a message from alsa saying the process is already running (or something similar... going from memory here...) It could be something sound related as the built in speakers are not working (sound card is recognized though and headphones work). Anyway, it's not the end of the world, but it's annoying and I'd like to know what's going on... Many thanks, and let me know if more info is needed.

  Read the article

• Graphics card initialisation problems when booting - requires a "double" boot

  - by DMA57361

  Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

  Read the article

• What to Do When Windows Won’t Boot

  - by Chris Hoffman

  You turn on your computer one day and Windows refuses to boot — what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting. Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair. First Things First Be sure to think about changes you’ve made recently — did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer. The Computer Won’t Power On At All If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case — on the power supply — is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer. Be sure to check your computer monitor — if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends. The Computer Powers On And Says No Bootable Device If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from its hard drive. If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from. In this case, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load. You can also attempt to manually fix Windows boot loader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself. Windows Freezes or Crashes During Boot If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8. If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem. Windows Starts and Blue Screens or Freezes If Windows crashes or blue-screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning. To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally. If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem. Recover Files When Windows Won’t Boot If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive. If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting. If even this doesn’t work — or if you can boot from the devices and your computer freezes or you can’t access your hard drive — you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way. Following these steps should fix the vast majority of Windows boot issues — at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing. Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr     

  Read the article

• Why is my external USB hard drive sometimes completely inaccessible?

  - by Eliah Kagan

  I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

  Read the article

• Multiple nt52 entries in bootmgr

  - by SLaks

  I have a machine with Windows XP, Server 2003 R2, and Server 2008 R2. Right now, bootmgr has one entry for Server 2008 R2 and one entry for ntldr, which then leads to the ntldr boot.ini menu. Is it possible to add two different nt52 entries on two partitions so that I can access all three OSes from the bootmgr menu? Right now, Server 2008 and XP are in logical drives on an extended partition, but (I assume) I can image them onto basic partitions if necessary.

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• How can I disable usb-autosuspend for a specific device?

  - by black_puppydog

  This is related to the issue discussed in this question. Summary: the mouse freezes when operating on battery since it is autosuspended after a certain time and needs more time to wake up. Disabling usb-autosuspend for the mouse's receiver in powertop is a temporary solution but does not survive a reboot. How can I permanently disable the usb autosuspend for only one specific device? A solution that does not involve installing additional packages is preferred (after all, I want to disable something) but not required. Removing powertop (which seems to be a solution for some) is not what I want - I like poertop... And installing laptop-mode-tools to disable usb_autosuspend alltogether is not what I want, either, thus the new question. Also: will this affect the battery of my notebook? The logitech unifying receiver for the mouse stays connected all the time, so if that prevents the autosuspend from happening for all devices that would probably be bad.

  Read the article

• How do you install a USB CD Rom drive in Ubuntu 10.04?

  - by Matt Allen

  Hello, I recently purchased a USB CD ROM drive, but I don't know how to get it to work with my computer which runs Ubuntu 10.04. http://www.amazon.com/gp/product/B00303H908/ref=oss_product When I issue the lsusb command, it shows up as: Bus 002 Device 016: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter The computer doesn't recognize it automatically. How can I get this drive to show up as an actual drive on my computer? If this particular drive can't handle Linux, can you recommended one which can and provide a link to it so I can purchase it? Thanks!

  Read the article

• My Ubuntu LiveUSB won't boot after formatting it on Windows XP. HELP!

  - by Bigyellow Bastion

  I formatted because the Windows XP I was using wouldn't let me view the drive in the window without formatting first, so I just said what the heck. Turns out, after using the Linux USB creator, placing the ISO on disc properly and booting, BIOS hangs; no bootloader, no startup, nothing. Windows XP's formatting screwed something up with my USB's filesystem, and I'm uncertain of what to do. Help?! My business depends on me using an OS, so prompt ideas are a must and very appreciated(no money). PS: I checked the contents of the disc, and they are all okay.

  Read the article

• Can I install ubuntu on usb hdd without loosing data on it?

  - by Radek

  I have live-usb stick that I can boot latest live Ubuntu from. Then I have 160GB external WD hdd with few GB free of space. My notebook can't have any internal hdd so I was wondering if I can use my external one to install and boot Ubuntu and install new programs, save settings etc. without loosing (or moving around) any data on this external hdd. The best would be if I can somehow use the live-usb. I'm traveling so any "complicated" solution might be bit hard to implement. I do have an access to the Internet.

  Read the article

• If Ubuntu freezes when running off a USB drive, will it freeze after full installation?

  - by fearoffours

  I'm planning to install Ubuntu on an aging Compaq Presario V5000. I've established that the Unity desktop is not suited to this laptop, and am now using the standard (Gnome?) desktop. I'm grappling with ndiswrapper and my wireless chipset. But I'm still running it off a USB drive before I take the plunge and install properly to my internal HD. Part of my reticence in completing the installation is I'm experience freezes after about 10-20 minutes usage. Is this likely to be in any way related to running it off the USB drive?

  Read the article

• How can I get a DisplayLink USB monitor under Ubuntu (any recent version) ?

  - by jfmessier

  I have a DisplayLink-based external USB monitor, which has both power and data over USB, and seems to work perfectly under Windows 7, but only can display a text console under Ubuntu 10.10, and that I can only use when I am actually switched to it. So the only Use I can have so far is to have some text-based monitoring or console that I can watch while working on the graphic display. I know there are some development done for DisplayLink, but I never could get it to actually run properly. Yes, I tried the detailed setup described in other posts, but they did not work, and instead crashed my X that I had to restore. Merci :-)

  Read the article

• Is it possible to power up ports on a USB hub from Ubuntu?

  - by James Henstridge

  I have a D-Link DUB-H7 powered USB 2.0 hub connected to my computer. Occasionally when I reboot the system, I've noticed that some of the ports on the hub get powered down: the green light next to the port is turned off, and the device attached to that port is not visible to lsusb or similar commands. Devices attached to the other ports on the hub function as normal. I am able to restore the ports by disconnecting power to the hub temporarily (from the computer, AC adapter and any devices that might provide any power such as my phone), but this is a bit of a hassle. It seems like something that might be related to power management, so is there some way you can tell the USB hub to power up through software?

  Read the article

• How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7?

  - by Timo

  The question says it all, but more detail follows ;) I've got a new computer that runs Windows 7 64-bits (Home Edition) and I'd like to connect it to my wireless home network (Sitecom wireless gigabit router 300N wl-352 v1 002) with a Sitecom wireless USB micro adaptapter 300 wl-352 V2 001. After installing the router (i.e. connected to the modem and power) and ensuring that wireless is indeed enabled, I've installed the driver of the USB adapter on the new computer described above. After the installation (drivers and utility on CD) completes successfull I rebooted my computer and inserted the USB adapter. After discovering the right network and connecting to it using the network key, a connection is succesfully made. (Using the Sitecom 300N USB Wireless LAN utility). In the LAN utility I can see that the signal strength is approximately 50% and connection quality is approximately 80%. Judging from these numbers I assumed that all was fine and started to use the connection (reading news on nu.nl, a dutch news site), but noticed that the connection was lost several times in a very short time span, but each time the connections was resumed, resulting in the 50/80 percent numbers described above. However, the website was not loaded completely and often a timeout would be reported. When inspecting the drivers through Device Management (Windows' Apparaatbeheer in dutch) there were no errors/warnings; everything seemed to be in order. In an attempt to solve this, I downloaded the latest drivers for the USB adapter, but the problems remained. Finally I tried to connect the computer with a Siemens Gigaset USB Adapter 108. This process was a troublesome since I had to download a driver (from the site above) and tell Windows (7) to use the Windows Vista driver when installing the new hardware, since there is (was) no Windows 7 driver available. This resulted in a usable connection, although not very stable when reconfiguring the router. Which took the form of selecting a different wireless channel on the router, even using the Sitecom utility mentioned above to check if there were other networks communicating on that channel (and thus picking a channel that was not used by other networks). Again no result when changing back to the Sitecom USB adapter. Note that this means (I think) that I could use the internet connection with the Siemens adapter, meaning the problem was not in the router. So: How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7? PS Sorry, but should be able to post one link, while I had links in place for the USB adapter, router and the siemens adapter in place as well, but I'm not (yet) allowed to post these... (The site says I can post one link, but only when no links are present will it allow me to post the question...)

  Read the article

• How can I get a USB floppy drive to work?

  - by jfmessier

  I have a Toshiba USB floppy drive that I need to use under Ubuntu. When I connect it, and insert a floppy disk in it, I do not see anything mounted under Ubuntu 10.10. I was suspecting the hardware and/or the floppy disk to be defective, and so I tested the floppy disk as well as the floppy drive itself under Windows XP, and everything was just fine. I was able to find the following instructions: Add the following line to the /etc/modules file: floppy Enter the following shell commands: mkdir /media/floppy mount -t vfat /dev/sdc /media/floppy -o uid=1000 This will mount the floppy, but I would like this to happen automatically, so when I connect the drive to the USB port, it automatically mounts the floppy. How can I make this work? Or does Ubuntu only work with internal Floppy drives?

  Read the article

• How do I configure wvdial to connect using a micromax 353g usb modem?

  - by user72209

  I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

  Read the article

• Install persistent Ubuntu Lucid Lynx on 16 GB pen Drive.

  - by Shubhkarman

  Hello. I am using Windows XP and I want to install Ubuntu Lucid Lynx on my 16 GB pen drive. I have a live Ubuntu disc. I want my install to be persistent so that whatever changes I make are preserved. I do not want to alter my MBR but I want to able to boot fro my pen drive through BIOS.

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >