Search Results

Search found 19925 results on 797 pages for 'retro software'.

Page 760/797 | < Previous Page | 756 757 758 759 760 761 762 763 764 765 766 767  | Next Page >

• why installing lame it is getting failed

  - by Rahul Mehta

  I want to install ffmpeg with mp3lame enabled for this m following this tutorial , http://ubuntuforums.org/showpost.php?p=9868359&postcount=1289 and in step 2 error is libfaac is not found ? and in step 5 installing lame is giving this error , why it is getting failed , please advised what to do ? reach121@youngib:~/lame-3.98.4$ sudo checkinstall --pkgname=lame-ffmpeg --pkgversion="3.98.4" --backup=no --default --deldoc=yes checkinstall 1.6.2, Copyright 2009 Felipe Eduardo Sanchez Diaz Duran This software is released under the GNU GPL. ***************************************** **** Debian package creation selected *** ***************************************** This package will be built according to these values: 0 - Maintainer: [ root@youngib ] 1 - Summary: [ Package created with checkinstall 1.6.2 ] 2 - Name: [ lame-ffmpeg ] 3 - Version: [ 3.98.4 ] 4 - Release: [ 1 ] 5 - License: [ GPL ] 6 - Group: [ checkinstall ] 7 - Architecture: [ amd64 ] 8 - Source location: [ lame-3.98.4 ] 9 - Alternate source location: [ ] 10 - Requires: [ ] 11 - Provides: [ lame-ffmpeg ] 12 - Conflicts: [ ] 13 - Replaces: [ ] Enter a number to change any of them or press ENTER to continue: Installing with make install... ========================= Installation results =========================== Making install in mpglib make[1]: Entering directory `/home/reach121/lame-3.98.4/mpglib' make[2]: Entering directory `/home/reach121/lame-3.98.4/mpglib' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/mpglib' make[1]: Leaving directory `/home/reach121/lame-3.98.4/mpglib' Making install in libmp3lame make[1]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame' Making install in i386 make[2]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/i386' make[3]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/i386' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/i386' make[2]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/i386' Making install in vector make[2]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[3]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[2]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[2]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame' make[3]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame' test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib" /bin/bash ../libtool --mode=install /usr/bin/install -c 'libmp3lame.la' '/usr/local/lib/libmp3lame.la' /usr/bin/install -c .libs/libmp3lame.lai /usr/local/lib/libmp3lame.la /usr/bin/install -c .libs/libmp3lame.a /usr/local/lib/libmp3lame.a chmod 644 /usr/local/lib/libmp3lame.a ranlib /usr/local/lib/libmp3lame.a PATH="$PATH:/sbin" ldconfig -n /usr/local/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame' make[2]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame' make[1]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame' Making install in frontend make[1]: Entering directory `/home/reach121/lame-3.98.4/frontend' make[2]: Entering directory `/home/reach121/lame-3.98.4/frontend' test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin" /bin/bash ../libtool --mode=install /usr/bin/install -c 'lame' '/usr/local/bin/lame' /usr/bin/install -c lame /usr/local/bin/lame make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/frontend' make[1]: Leaving directory `/home/reach121/lame-3.98.4/frontend' Making install in Dll make[1]: Entering directory `/home/reach121/lame-3.98.4/Dll' make[2]: Entering directory `/home/reach121/lame-3.98.4/Dll' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/Dll' make[1]: Leaving directory `/home/reach121/lame-3.98.4/Dll' Making install in debian make[1]: Entering directory `/home/reach121/lame-3.98.4/debian' make[2]: Entering directory `/home/reach121/lame-3.98.4/debian' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/debian' make[1]: Leaving directory `/home/reach121/lame-3.98.4/debian' Making install in doc make[1]: Entering directory `/home/reach121/lame-3.98.4/doc' Making install in html make[2]: Entering directory `/home/reach121/lame-3.98.4/doc/html' make[3]: Entering directory `/home/reach121/lame-3.98.4/doc/html' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/local/share/doc/lame/html" || /bin/mkdir -p "/usr/local/share/doc/lame/html" /bin/mkdir: cannot create directory `/usr/local/share/doc': No such file or directory make[3]: *** [install-pkghtmlDATA] Error 1 make[3]: Leaving directory `/home/reach121/lame-3.98.4/doc/html' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/home/reach121/lame-3.98.4/doc/html' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/reach121/lame-3.98.4/doc' make: *** [install-recursive] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. reach121@youngib:~/lame-3.98.4$

  Read the article

• MDM for Tax Authorities

  - by david.butler(at)oracle.com

  In last week’s MDM blog, we discussed MDM in the Public Sector. I want to continue that thread. After all, no industry faces tougher data quality problems than governmental organizations, and few industries suffer more significant down side consequences to poor operations than local, state and federal governments. One key challenge area is taxation. Tax Authorities face a multitude of IT challenges. Firstly, the data used in tax calculations is increasing in volume and complexity. They must improve service by introducing multi-channel contact centers and self-service capabilities. Security concerns necessitate increasingly sophisticated data protection procedures. And cost constraints are driving Tax Authorities to rely on off-the-shelf software for many of their functional areas. Compounding these issues is the fact that the IT architectures in operation at most revenue and collections agencies are very complex. They typically include multiple, disparate operational and analytical systems across which the sum total of data about individual constituents is fragmented. To make matters more complicated, taxation is not carried out by a single jurisdiction, and often sources of income including employers, investments and other sources of taxable income and deductions must also be tracked and shared among tax authorities. Collectively, these systems are involved in tax assessment and collections, risk analysis, scoring, tracking, auditing and investigation case management. The Problem of Constituent Data Management The infrastructure described above makes it very difficult to create a consolidated representation of a given party. Differing formats and data models mean that a constituent may be represented in one way in one system and in a different way in another. Individual records are frequently inaccurate, incomplete, out of date and/or inconsistent with other records relating to the same constituent. When constituent data must be aggregated and scored, information within each system must be rationalized and normalized so the agency can produce a constituent information file (CIF) that provides a single source of truth about that party. If information about that constituent changes, each system in turn must be updated. There have been many attempts to solve this problem with technology: from consolidating transactional systems to conducting manual systems integration projects and superimposing layers of business intelligence and analytics. All these approaches can be successful in solving a portion of the problem at a specific point in time, but without an enterprise perspective, anything gained is quickly lost again. Oracle Constituent Data Mastering for Tax Authorities: A Single View of the Constituent Oracle has a flexible and long-term solution to the problem of securely integrating and managing constituent data. The Oracle Solution for mastering Constituent Data for Tax Authorities is based on two core product offerings: Oracle Customer Hub and – optionally – Oracle Application Integration Architecture (AIA). Customer Hub is a master data management (MDM) product that centralizes, de-duplicates, and enriches constituent data. It unifies fragmented information without disrupting existing business processes or IT investments. Role based data access and privacy rules guarantee maximum security and privacy. Data is continuously and automatically synchronized with all source systems. With the Oracle Customer Hub managing the master constituent identity, every department can capture transaction activity against the same record, improving reporting accuracy, employee productivity, reliability of constituent analytics, and day-to-day constituent relationships. Oracle Application Integration Architecture provides a collection of core pre-built processes to support out of the box Master Data Governance across Oracle Customer Hub, Siebel CRM, and Oracle E-Business Suite. It also provides a framework to enable MDM integrations with other Oracle and non-Oracle applications. Oracle AIA removes some of the key inhibitors to implementing a service-oriented architecture (SOA) by providing a pre-built SOA-based middleware foundation as well as industry-optimized service oriented applications, all built around a SOA governance model that encourages effective design and reuse. I encourage you to read Oracle Solution for Mastering Constituents Data for Public Sector – Tax Authorities by Roberto Negro. It is an outstanding whitepaper that describes how the Oracle MDM solution allows you to create a unified, reconciled source of high-quality constituent data and gain an accurate single view of each constituent. This foundation enables you to lower the costs associated with data quality and integration and create a tax organization that is efficient, secure and constituent-centric. Also, don’t forget the upcoming webcast on Thursday, February 10th: Deliver Improved Services to Citizens at Lower Cost to your Organization Our Guest Speaker is Ruben Spekle, from Capgemini. He will also provide insight into Public Sector Master Data Management and Case Management implementations including one that was executed for a Dutch Government Agency. If you are interested in how governmental organizations from around the world are using MDM to advance their cause, click here to register for the webcast.

  Read the article

• Imaging: Paper Paper Everywhere, but None Should be in Sight

  - by Kellsey Ruppel

  Author: Vikrant Korde, Technical Architect, Aurionpro's Oracle Implementation Services team My wedding photos are stored in several empty shoeboxes. Yes...I got married before digital photography was mainstream...which means I'm old. But my parents are really old. They have shoeboxes filled with vacation photos on slides (I doubt many of you have even seen a home slide projector...and I hope you never do!). Neither me nor my parents should have shoeboxes filled with any form of photographs whatsoever. They should obviously live in the digital world...with no physical versions in sight (other than a few framed on our walls). Businesses grapple with similar challenges. But instead of shoeboxes, they have file cabinets and warehouses jam packed with paper invoices, legal documents, human resource files, material safety data sheets, incident reports, and the list goes on and on. In fact, regulatory and compliance rules govern many industries, requiring that this paperwork is available for any number of years. It's a real challenge...especially trying to find archived documents quickly and many times with no backup. Which brings us to a set of technologies called Image Process Management (or simply Imaging or Image Processing) that are transforming these antiquated, paper-based processes. Oracle's WebCenter Content Imaging solution is a combination of their WebCenter suite, which offers a robust set of content and document management features, and their Business Process Management (BPM) suite, which helps to automate business processes through the definition of workflows and business rules. Overall, the solution provides an enterprise-class platform for end-to-end management of document images within transactional business processes. It's a solution that provides all of the capabilities needed - from document capture and recognition, to imaging and workflow - to effectively transform your ‘shoeboxes’ of files into digitally managed assets that comply with strict industry regulations. The terminology can be quite overwhelming if you're new to the space, so we've provided a summary of the primary components of the solution below, along with a short description of the two paths that can be executed to load images of scanned documents into Oracle's WebCenter suite. WebCenter Imaging (WCI): the electronic document repository that provides security, annotations, and search capabilities, and is the primary user interface for managing work items in the imaging solution SOA & BPM Suites (workflow): provide business process management capabilities, including human tasks, workflow management, service integration, and all other standard SOA features. It's interesting to note that there a number of 'jumpstart' processes available to help accelerate the integration of business applications, such as the accounts payable invoice processing solution for E-Business Suite that facilitates the processing of large volumes of invoices WebCenter Enterprise Capture (WEC): expedites the capture process of paper documents to digital images, offering high volume scanning and importing from email, and allows for flexible indexing options WebCenter Forms Recognition (WFR): automatically recognizes, categorizes, and extracts information from paper documents with greatly reduced human intervention WebCenter Content: the backend content server that provides versioning, security, and content storage There are two paths that can be executed to send data from WebCenter Capture to WebCenter Imaging, both of which are described below: 1. Direct Flow - This is the simplest and quickest way to push an image scanned from WebCenter Enterprise Capture (WEC) to WebCenter Imaging (WCI), using the bare minimum metadata. The WEC activities are defined below: The paper document is scanned (or imported from email). The scanned image is indexed using a predefined indexing profile. The image is committed directly into the process flow 2. WFR (WebCenter Forms Recognition) Flow - This is the more complex process, during which data is extracted from the image using a series of operations including Optical Character Recognition (OCR), Classification, Extraction, and Export. This process creates three files (Tiff, XML, and TXT), which are fed to the WCI Input Agent (the high speed import/filing module). The WCI Input Agent directory is a standard ingestion method for adding content to WebCenter Imaging, the process for doing so is described below: WEC commits the batch using the respective commit profile. A TIFF file is created, passing data through the file name by including values separated by "_" (underscores). WFR completes OCR, classification, extraction, export, and pulls the data from the image. In addition to the TIFF file, which contains the document image, an XML file containing the extracted data, and a TXT file containing the metadata that will be filled in WCI, are also created. All three files are exported to WCI's Input agent directory. Based on previously defined "input masks", the WCI Input Agent will pick up the seeding file (often the TXT file). Finally, the TIFF file is pushed in UCM and a unique web-viewable URL is created. Based on the mapping data read from the TXT file, a new record is created in the WCI application.  Although these processes may seem complex, each Oracle component works seamlessly together to achieve a high performing and scalable platform. The solution has been field tested at some of the largest enterprises in the world and has transformed millions and millions of paper-based documents to more easily manageable digital assets. For more information on how an Imaging solution can help your business, please contact [email protected] (for U.S. West inquiries) or [email protected] (for U.S. East inquiries). About the Author: Vikrant is a Technical Architect in Aurionpro's Oracle Implementation Services team, where he delivers WebCenter-based Content and Imaging solutions to Fortune 1000 clients. With more than twelve years of experience designing, developing, and implementing Java-based software solutions, Vikrant was one of the founding members of Aurionpro's WebCenter-based offshore delivery team. He can be reached at [email protected].

  Read the article

• Blog Buzz - Devoxx 2011

  - by Janice J. Heiss

  Some day I will make it to Devoxx – for now, I’m content to vicariously follow the blogs of attendees and pick up on what’s happening.  I’ve been doing more blog "fishing," looking for the best commentary on 2011 Devoxx. There’s plenty of food for thought – and the ideas are not half-baked.The bloggers are out in full, offering useful summaries and commentary on Devoxx goings-on.Constantin Partac, a Java developer and a member of Transylvania JUG, a community from Cluj-Napoca/Romania, offers an excellent summary of the Devoxx keynotes. Here’s a sample:“Oracle Opening Keynote and JDK 7, 8, and 9 Presentation•    Oracle is committed to Java and wants to provide support for it on any device.•    JSE 7 for Mac will be released next week.•    Oracle would like Java developers to be involved in JCP, to adopt a JSR and to attend local JUG meetings.•    JEE 7 will be released next year.•    JEE 7 is focused on cloud integration, some of the features are already implemented in glassfish 4 development branch.•    JSE 8 will be release in summer of 2013 due to “enterprise community request” as they can not keep the pace with an 18    month release cycle.•    The main features included in JSE8 are lambda support, project Jigsaw, new Date/Time API, project Coin++ and adding   support for sensors. JSE 9 probably will focus on some of these features:1.    self tuning JVM2.    improved native language integration3.    processing enhancement for big data4.    reification (adding runtime class type info for generic types)5.    unification of primitive and corresponding object classes6.    meta-object protocol in order to use type and methods define in other JVM languages7.    multi-tenancy8.    JVM resource management” Thanks Constantin! Ivan St. Ivanov, of SAP Labs Bulgaria, also commented on the keynotes with a different focus.  He summarizes Henrik Stahl’s look ahead to Java SE 8 and JavaFX 3.0; Cameron Purdy on Java EE and the cloud; celebrated Java Champion Josh Bloch on what’s good and bad about Java; Mark Reinhold’s quick look ahead to Java SE 9; and Brian Goetz on lambdas and default methods in Java SE 8. Here’s St. Ivanov’s account of Josh Bloch’s comments on the pluses of Java:“He started with the virtues of the platform. To name a few:    Tightly specified language primitives and evaluation order – int is always 32 bits and operations are executed always from left  to right, without compilers messing around    Dynamic linking – when you change a class, you need to recompile and rebuild just the jar that has it and not the whole application    Syntax  similarity with C/C++ – most existing developers at that time felt like at home    Object orientations – it was cool at that time as well as functional programming is today    It was statically typed language – helps in faster runtime, better IDE support, etc.    No operator overloading – well, I’m not sure why it is good. Scala has it for example and that’s why it is far better for defining DSLs. But I will not argue with Josh.”It’s worth checking out St. Ivanov’s summary of Bloch’s views on what’s not so great about Java as well. What's Coming in JAX-RS 2.0Marek Potociar, Principal Software Engineer at Oracle and currently specification lead of Java EE RESTful web services API (JAX-RS), blogged on his talk about what's coming in JAX-RS 2.0, scheduled for final release in mid-2012.  Here’s a taste:“Perhaps the most wanted addition to the JAX-RS is the Client API, that would complete the JAX-RS story, that is currently server-side only. In JAX-RS 2.0 we are adding a completely interface-based and fluent client API that blends nicely in with the existing fluent response builder pattern on the server-side. When we started with the client API, the first proposal contained around 30 classes. Thanks to the feedback from our Expert Group we managed to reduce the number of API classes to 14 (2 of them being exceptions)! The resulting is compact while at the same time we still managed to create an API that reflects the method invocation context flow (e.g. once you decide on the target URI and start setting headers on the request, your IDE will not try to offer you a URI setter in the code completion). This is a subtle but very important usability aspect of an API…” Obviously, Devoxx is a great Java conference, one that is hitting this year at a time when much is brewing in the platform and beginning to be anticipated.

  Read the article

• How to Play PC Games on Your TV

  - by Chris Hoffman

  No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV.  Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

  Read the article

• Guidance: How to layout you files for an Ideal Solution

  - by Martin Hinshelwood

  Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

  Read the article

• LA SPÉCIALISATION POUR SE DIFFÉRENCIER ET ÊTRE VALORISÉ

  - by michaela.seika(at)oracle.com

  Software. Hardware. Complete. inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ --     LA SPÉCIALISATION  POUR SE DIFFÉRENCIER ET ÊTRE VALORISÉ       Le marché nous demande de plus en plus de solutions et d’engagements. Pour bâtir ces solutions nous nous appuyons sur vous, Partenaires Oracle. En matière d’engagements, Oracle se doit de communiquer auprès du marché quant à la spécialisation de ses partenaires, sur leurs compétences en fonction des projets que les clients nous demandent d’adresser. Plus de 50 spécialisations sont à ce jour disponibles pour les partenaires Gold, Platinum et Diamond : • Sur les produits Technologiques tels que la Base de Données, les options de la Base, la SOA, la Business Intelligence, … • Sur les produits Applicatifs, tels que l’ERP, le CRM, … • Sur les produits Hardware, les Systèmes d’exploitation. Afin de vous aider à vous spécialiser et donc à vous certifier, nos 2 distributeurs à valeur ajoutée, Altimate et Arrow ECS, vous assistent dans cette démarche. ALTIMATE vous propose de participer Lunch & Spécialisation tour Profitez de ces dispositifs qui sont mis en place pour vous afin de vous spécialiser et profiter de tous les bénéfices auxquels vous donne accès la spécialisation. ARROW ECS vous propose de participer : L'Ecole de la spécialisation Oracle by Arrow Profitez de ces dispositifs qui sont mis en place pour vous afin de vous spécialiser et profiter de tous les bénéfices auxquels vous donne accès la spécialisation. Oracle Solutions Tour Découvrez la solution Oracle lors de ce tour de France. Au programme :  roadmaps, ateliers produits et solutions, certifications     BÉNÉFICES en savoir + • l’engagement d’Oracle aux côtés des partenaires pour adresser les grands dossiers • la visibilité auprès des clients pour être identifié comme Expert sur une offre, reconnu et validé par Oracle • le support (accès support gratuit), Oracle University (vouchers pour certifier gratuitement vos équipes de Consultants Implementation) • les budgets Marketing (lead generation, création de campagnes Marketing, être sponsor d’événements clients)   Différenciez-vous en vous spécialisant sur votre domaine d’expertise et accélérez votre succès ! Oracle et ses Distributeurs à Valeur Ajoutée     Eric Fontaine Directeur Alliances & Channel Technologie Europe du Sud vous présente en vidéo la spécialisation et ses avantages.                                         CONTACTS : ORACLE Jean-Jacques PanissiéOracle Partner Development A&C Technology +33 157 60 28 52 ALTIMATE Sophie Daval +33 1 34 58 47 68 ARROW [email protected] +33 1 49 97 59 63          

  Read the article

• Cowboy Agile?

  - by Robert May

  In a previous post, I outlined the rules of Scrum.  This post details one of those rules. I’ve often heard similar phrases around Scrum that clue me in to someone who doesn’t understand Scrum.  The phrases go something like this: “We don’t do Agile because the idea of letting people just do whatever they want is wrong.  We believe in a more structured approach.” (i.e. Work is Prison, and I’m the Warden!) “I love Agile.  Agile lets us do whatever we want!” (Cowboy Agile?) “We’re Agile, but we use a process that I’ve created.” (Cowboy Agile?) All of those phrases have one thing in common:  The assumption that Agile, and I mean Scrum, lets you do whatever you want.  This is simply not true. Executing Scrum properly requires more dedication, rigor, and diligence than happens in most traditional development methods. Scrum and Waterfall Compared Since Scrum and Waterfall are two of the most commonly used methodologies, a little bit of contrasting and comparing is in order. Waterfall Scrum A project manager defines all tasks and then manages the tasks that team members are working on. The team members define the tasks and estimates of the stories for the current iteration.  Any team member may work on any task in the iteration. Usually only a few milestones that need to be met, the milestones are measured in months, and these milestones are expected to be missed.  Little work is ever done to improve estimates and poor estimators can hide behind high estimates. Stories must be delivered every iteration, milestones are measured in hours, and the team is expected to figure out why their estimates were wrong, even when they were under.  Repeated misses can get the entire team fired. Partially completed work is normal. Partially completed work doesn’t count. Nobody knows the task you’re working on. Everyone knows what you’re working on, whether or not you’re making progress and how much longer you think its going to take, in hours. Little requirement to show working code.  Prototypes are ok. Working code must be shown each iteration.  No smoke and mirrors allowed.  Testing is done in lengthy cycles at the end of development.  Developers aren’t held accountable. Testing is part of the team.  If the testers don’t accept the story as complete, the team can’t count it.  Complete means that the story’s functionality works as designed.  The team can’t have any open defects on the story. Velocity is rarely truly measured and difficult to evaluate. Velocity is integral to the process and can be seen at a glance and everyone in the company knows what it is. A business analyst writes requirements.  Designers mock up screens.  Developers hide behind “I did it just like the spec doc told me to and made the screen exactly like the picture” Developers are expected to collaborate in real time.  If a design is bad or lacks needed details, the developers are required to get it right in the iteration, because all software must be functional.  Designers and Business Analysts are part of the team and must do their work in iterations slightly ahead of the developers. Upper Management is often surprised.  “You told me things were going well two months ago!” Management receives updates at the end of every iteration showing them exactly what the team did and how that compares to what' is remaining in the backlog.  Managers know every iteration what their money is buying. Status meetings are rare or don’t occur.  Email is a primary form of communication. Teams coordinate every single day with each other and use other high bandwidth communication channels to make sure they’re making progress.  Email is used only as a last resort.  Instead, team members stand up, walk to each other, and talk, face to face.  If that’s not possible, they pick up the phone. IF someone asks what happened, its at the end of a lengthy development cycle measured in months, and nobody really knows why it happened. Someone asks what happened every iteration.  The team talks about what happened, and then adapts to make sure that what happened either never happens again or happens every time.   That’s probably enough for now.  As you can see, a lot is required of Scrum teams! One of the key differences in Scrum is that the burden for many activities is shifted to a group of people who share responsibility, instead of a single person having responsibility.  This is a very good thing, since small groups usually come up with better and more insightful work than single individuals.  This shift also results in better velocity.  Team members can take vacations and the rest of the team simply picks up the slack.  With Waterfall, if a key team member takes a vacation, delays can ensue. Scrum requires much more out of every team member and as a result, Scrum teams outperform non-Scrum teams working 60 hour weeks. Recommended Reading Everyone considering Scrum should read Mike Cohn’s excellent book, User Stories Applied. Technorati Tags: Agile,Scrum,Waterfall

  Read the article

• Enable DreamScene in Any Version of Vista or Windows 7

  - by DigitalGeekery

  Windows DreamScene was a utility available for Vista Ultimate that allowed users to set video as desktop wallpaper. It was dropped in Windows 7, but we’ll take a look at how to play DreamScenes in all versions of Windows 7 or Vista. Downloading DreamScenes First, you’ll need to find some DreamScenes to download. We’ve found some nice ones at both DreamScene.org and DeviantArt. You can find those download links at the end of the article. They’ll come as compressed files, so you’ll need to extract them after downloading. Windows 7 DreamScene Activator If you are running Windows 7 you can use Windows 7 DreamScene Activator. This free portable utility enables DreamScene in both 32 & 64 bit versions of Windows 7. Users can then set either MPG or WMV files as desktop wallpaper. Download and extract the Windows 7 DreamScene Activator (link below). Once extracted, you’ll need to run the application as administrator. Right-click on the .exe and select Run as administrator. Click on Enable DreamScene. This will also restart Windows Explorer if it is open. To play your DreamScene, browse for the file in Windows Explorer, right-click the file and select Set as Desktop Background. Enjoy your new Windows 7 DreamScene.   Although it says it is for Windows 7 only, we were able to get it to work with no problems on Vista Home Premium x32 as well.   You can Pause the DreamScene at anytime by right-clicking on the desktop and selecting Pause DreamScene.   When you are ready for a change, click Disable DreamScene and switch back to your previous wallpaper. Using VLC Media Player Users of all versions of Windows 7 & Vista can enable a DreamScene using VLC. Recently, we showed you how to set a video as your desktop wallpaper in VLC.  Since DreamScenes are in MPEG or WMV format, we will use the same tactic to display them as desktop wallpaper. We’ll just need to make a few additional tweaks to the VLC settings. You’ll need to download and install VLC media player if you don’t already have it. You can find the download link below. Next, select Tools > Preferences from the Menu. Select the Video button on the left and then choose DirectX video output from the Output dropdown list. Next, select All under Show Settings at the lower left, then select the Video button on the left pane. Uncheck Show media title on video. This will prevent VLC from constantly showing the title of the video on the screen each time the video loops. Click Save and the restart VLC.   Now we will add the video to our playlist and set it to continuously loop. Select View > Playlist from the Menu. Select the Add file button from the bottom of the Playlist window and select Add file.   Browse for your file and click Open.   Click the Loop button at the bottom so the video plays in a continuous loop.   Now, we’re ready to play the video. After the video starts playing, select Video > DirectX Wallpaper from the Menu, then minimize VLC.   If you’re using Aero Themes, you may get a pop-up warning and Windows will switch automatically to a basic theme.   If looping one video gets to be a little repetitive, you can add multiple videos to your playlist in VLC and loop the entire playlist. Just make sure you toggle the Loop button on the playlist window to Loop All. Now you’ve got a nice DreamScene playing on your desktop. Another cool trick you can do with VLC is take snapshots of favorite movie scenes and set them as backgrounds. When you’re ready to go back to your old wallpaper, maximize VLC, select Video and click DirectX Wallpaper again to turn it off the video background. Occasionally we were left with a black screen and had to manually change our wallpaper back to normal even after turning off the DirectX Wallpaper. Note: Keep in mind that using the VLC method takes up a lot of resources so if you try to run it on older hardware, or say a netbook, you’re not going to get good results. We also tried to use the VLC method in XP, but couldn’t get it to work. If you have leave a comment and let us know. While the DreamScene feature never really caught on in Vista, we find them to be a cool way to pump a little life into your desktop on any version of Vista or Windows 7. Downloads DreamScenes from Dreamscene.org DreamScenes from DeviantArt Download VLC media player Windows 7 DreamScene Activator Similar Articles Productive Geek Tips Wait, How do I Turn on DreamScene Again?Enable Run Command on Windows 7 or Vista Start MenuEnable or Disable UAC From the Windows 7 / Vista Command LineUnderstanding Windows Vista Aero Glass RequirementsEnable Mapping to \HostnameC$ Share on Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

  Read the article

• Breaking up the Workday– Overcoming the Workaholic Syndrome

  - by dwahlin

  Hi, my name’s Dan Wahlin and I’m a workaholic – I admit it. It’s good from the standpoint that I get a lot done but it also has a lot of cons associated with it as well that I’m not proud of. I literally can’t watch TV without feeling like I should be doing something more productive (although I have no problem going to see movies at a theater or watching sporting events – that’s my escape I guess). On vacation it’s sometimes difficult the first few days to just “let go” of work and enjoy the time with my family. I always feel like I should be checking email and following up with different business projects. Fortunately, my wife knows me really well after 17 years of marriage and “gently” restricts my usage of laptops and other gadgets while we’re out. She also reminds me that constantly burying my face in gadgets just isn’t cool and shows a distinct lack of self control. On a given day I typically put in between 12 (at a minimum) up to 16-18 hours working on projects. My company does .NET consulting (ASP.NET/jQuery, SharePoint and Silverlight) but we also do a lot in the training space so there’s always a client project, some new courseware or some other deliverable that has to be worked on. My normal process for handling that is to just work my butt off and see how much I can get done. That process has worked well for a long time but when you start realizing that your happiness comes from how much work you accomplished that day then you have a problem. That’s especially true if you have kids (which I do….two awesome boys). It’s almost as if working more hours feels like I’m more successful or something which is of course ridiculous. It may actually mean that I’m too distracted or disorganized. Lately I’ve realized that while I’m still productive and always meet my deadlines, I’m really burnt out by the afternoon and have lost some of the excitement I used to have. Part of that’s normal I think given that I’ve been doing this for close to 15 years now, but in thinking through it more I realized that I just need to get away from the desk and take a break. By far, the happiest time of my life was my childhood. Part of that was due to having awesome parents, having far less responsibility (a big factor I suspect), being able to hang-out with friends at school, playing sports, games, etc. but I think a big part of the overall happiness came from being outside a lot. I lived on my bike as a little kid and as I grew up I shared time between riding an ATV all over the place, shooting hoops on the basketball court, playing golf and working on a golf course (all outside work of course).  Being a software developer and trainer I generally spend 95% or more of my day indoors and only see the sun when driving from place to place or by looking out the window (that’s sad because I live in a suburb of Phoenix, AZ where it’s nearly always sunny). I haven’t looked into any scientific studies on the matter, but I’d be willing to bet there’s a direct correlation between overall productivity/happiness and being outside some throughout the day (sunny or not). But, I wasn’t sure what to do about it since I do have a lot of deadlines I need to meet after all. While talking with my wife last night I mentioned how I feel like I’m in a rut and want to get the “fun” back that I used to have. She immediately said that I need to start making time for breaks (a real quick fact – she’s a lot smarter than me and nearly always right). Of course my first thought was that I’d be less productive taking breaks. If I spend 2 hours just relaxing then I’m losing 2 hours of work. But, I thought about it more and realized that I’m probably less productive when I work 10+ hours and only take less than 30 minutes for a lunch break to relax a little. I bet my brain is screaming, “Please let me relax a little so I can figure out these problems you’re trying to resolve!”. So, starting today I’m going to try to break the workaholic habit and spend time outside of the office. That could mean sitting around outside, working out, golfing, or whatever. I’ve decided that no gadgets are allowed during that time and that I shouldn’t work for more than 4 hours straight without taking a break. I have no idea how my little “break the workaholic syndrome” experiment will go or how long it will last, but I’d be very interested in hearing from others on how they keep fresh and focused without working yourself to death. If you have any specific ideas, techniques or practices you follow please share them. There’s a lot more to life than work and some of us (and I’m thinking of myself specifically) need to take a long, hard look at what kind of balance we currently have. I’d hate to look back at my life when I’m 80 years old and say, “The only thing I did was work – I missed out on life!”.

  Read the article

• Deep in the Heart of Texas

  - by Applications User Experience

  Author: Erika Webb, Manager, Fusion Applications UX User Assistance When I was first working in the usability field, the only way I could consider conducting a usability study was to bring a potential user to a lab environment where I could show them whatever I was interested in learning more about and ask them questions. While I hate to reveal just how long I have been working in this field, let's just say that pads of paper and a stopwatch were key tools for any test I conducted. Over the years, I have worked in simple labs with basic video taping equipment and not much else, and I have worked in corporate environments with sophisticated usability labs and state-of-the-art equipment. Years ago, we conducted all usability studies at the location of the user. If we wanted to see if there were any differences between users in New York, Chicago, and Los Angeles, we went to those places to run the test. A lab environment is very useful for many test situations. However, there has always been a debate in the usability field about whether bringing someone into a lab environment, however friendly we make it, somehow intrinsically changes the behavior of the user as compared to having them work in their own environment, at their own desk, and on their own computer. We developed systems to create a portable usability lab, so that we could go to the users that we needed to test.  Do lab environments change user behavior patterns? Then 9/11 hit. You may not remember, but no planes flew for weeks afterwards. Companies all over the world couldn't fly-in employees for meetings. Suddenly, traveling to the location of the users had an additional difficulty. The company I was working for at the time had usability specialists stuck in New York for days before they could finally rent a car and drive home to Colorado. This changed the world pretty suddenly, and technology jumped on the change. Companies offering Internet meeting tools were strugglinguntil no one could travel. The Internet boomed with collaboration tools that enabled people to work together wherever they happened to be. This change in technology has made a huge difference in my world. We use collaborative tools to bring our product concepts and ideas to the user across the Internet. As a global company, we benefit from having users from all over the world inform our designs. We now run usability studies with users all over the world in a single day, a feat we couldn't have accomplished 10 years ago by plane! Other technology companies have started to do more of this type of usability testing, since the tools have improved so dramatically. Plus, in our busy world, it's not always easy to find users who can take the time away from their jobs to come to our labs. reaching users where it is convenient for them greatly improves the odds that people do participate. I manage a team of usability specialists who live in India and California, whlie I live in Colorado. We have wonderful labs that we bring users into to show them our products. But very often, we run our studies remotely. We used to take the lab to the users now we use the labs, but we let the users stay where they are. We gain users who might not have been able to leave work to come to our labs, and they get to use the system they are familiar with. And we gain users nearly anywhere that we can set up an Internet connection, as long as the users have a phone, a broadband connection, and a compatible Web browser (with no pop-up blockers). After we recruit participants in a traditional manner, we send them an invitation to participate through the use of a telephone conference call and Web conferencing tool. At Oracle, we use Oracle Web Conference part of Oracle Collaboration Suite, which enables us to give the user control of the mouse, while we present a prototype or wireframe pictures. We can record the sessions over the Web and phone conference. We send the users instructions, plus tips to ensure that we won't have problems sharing screens. In some cases, when time is tight, we even run a five-minute "test session" with users a day in advance to be sure that we can connect. Prior to the test, we send users a participant script that contains information about the study, including any questionnaires. This is exactly the same script we give to participants who come to the labs. We ask users to print this before the beginning of the session. We generally run these studies by having a usability engineer in our usability labs, so that we can record the session as though the user were in the lab with us. Roughly 80% of our application software usability testing at Oracle is performed using remote methods. The probability of getting a   remote test participant decreases the higher up the person is in the target organization. We have a methodology checklist available to help our usability engineers work through the remote processes.

  Read the article

• Manage Your Amazon S3 Account with CloudBerry Explorer

  - by Mysticgeek

  If you have an Amazon S3 account you’re using to backup your data, you might want an easy way to manage it. CloudBerry Explorer is a free app that runs on your desktop an provides an easy way to manage your S3 account. Installation and Setup Just download and install the application with the defaults. When the application launches you’ll be prompted to enter in your username and email to get a registration key. Or you can continue on by clicking Register later. Now you will want to set up your Amazon S3 account. Click on File \ Amazon S3 Accounts. Double-click on the New Account icon.   Next enter in your Amazon account Access and Secret keys, select SSL if you want, then click the Test Connection button. Provided everything was entered correctly, you’ll see the Connection Success screen, just close out of it. Browse and Manage files Once you have your account setup through the Explorer, you can start viewing and managing your files on S3. The left pane shows your S3 buckets and stored files, while the right side shows your local computer. This allows you to manage your files in your Amazon S3 buckets directly from your desktop! It’s very easy to use, and you can drag and drop files from your computer to the S3 account or vice versa. There is also the ability to transfer files between Amazon S3 accounts from within the explorer. Go into Tools and Content Types and you can control the file types by adding, removing, or editing them. If you end up messing something up along the lines, you can always select Reset to defaults and everything will be back to normal. There is a multiple tabbed view so you can easily keep track of your different accounts and local machine. It allows the ability to create new storage buckets directly in the Explorer. Or you can delete buckets as well… Different actions can be accessed from the toolbars or by right-clicking and selecting from the context menu. Here we see a cool option that lets you move your data inside Amazon S3. It is faster and doesn’t cost money by moving the files to your computer first, then to another account. However, if you want data moved to your local machine first, you have that option as well.   Not all features are available in the free version, and if it’s not, you’ll be prompted to purchase a license for the Pro version. We will have a comprehensive review of the Pro version in the near future.    If you ever need help with CloudBerry Explorer, go to Tools \ Diagnostics. It will run a quick diagnostics check and you can send the information to the CloudBerry team for assistance. Delete Files from Amazon S3 To delete a file from you Amazon S3 account, simply highlight the files or folder you want to get rid of then click Delete on the toolbar. You can also right-click the file and select Delete from the Context Menu. Click Yes to the confirmation dialog box… Then you can watch the progress as your files are deleted in the bottom section of the explorer. Conclusion CloudBerry Explorer free version has several neat features that will allow you easy and basic control over you Amazon S3 account. The free version may be enough for basic users, but power users will want to upgrade to the pro version, as it includes a lot more features. Using the free version allows you to get a feel for what CloudBerry Explorer has to offer, and is a good starting point. Keep in mind that Amazon S3 is introducing Reduced Redundancy Storage which will lower the price of data stored. The price drops from $0.15 per GB to only $0.10 per GB. If you’re a Windows Home Server user, check out our review of CloudBerry Online Backup 1.5 for WHS. Download CloudBerry Explorer Free for Amazon S3 Similar Articles Productive Geek Tips CloudBerry Online Backup 1.5 for Windows Home ServerReopen Closed Tabs in Internet ExplorerPreview and Purchase Ebooks with Kindle for PCTroubleshoot and Manage Addons in Internet Explorer 8Beginner Geek: Delete User Accounts in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• MSCC: Career & IT Fair 2014

  Already a couple of weeks ago, I've been addressed by Ibraahim and Yunus to see whether it would be interesting to participate in the 1st Career & IT Fair organised by the UoM Computer Club. Well, luckily we met at the Global Windows Azure Bootcamp and I wasn't too sure whether it would be possible for me to attend after all. The main reason is given because of work demand and furthermore due to the fact that the Mauritius Software Craftsmanship Community currently has no advertising material at all. Here's the brief statement of the event: "The UOM Students' Computer Club in collaboration with the UOM Students' Union and UOM CSE Department is organising a 'Career & IT Fair' on the 23rd and 24th April 2014. This event has for objective to provide a platform to tertiary students, secondary students as well as vocational students, the opportunity to meet job recruiters." Luckily, I was reminded that the 23rd is a Wednesday, and therefore I decided that it might be interesting to move our weekly Code & Coffee session to the university and hence be able to attend the career fair. As it turned out it was a great choice and thankfully Pritvi, Nadim as well as Ishwon volunteered to be around at the "community booth". Thankfully, the computer club gave us - the MSCC and the LUGM - one of their spaces in the lobby area of the Paul Octave Wiéhé Auditorium. My impression about the event Very well and professionally organised. Seriously, the lads over at the UoM Computer Club did a great job in organising their 2 days event, and felt very comfortable at any time. Actually, it was kind of amusing to some of the members constantly running around and checking everything. Even though that the whole process went smooth and easy off the hand. There were a couple of interesting pieces of information and announcements during the opening ceremony. For example, the Computer Science faculty is a very young one and has been initiated back in 1988 only - just by 4 staff members at that time. Now, after 25 years they have achieved quite a lot and there are currently 1.000+ active students attending the numerous lectures and courses. But there is no room to rest on previous achievements, and I was kind of surprised to hear that there are plans to extend the campus, and offer new lectures in the fields of nanotechnology, big data handling, and - crossing fingers - the introduction and establishment of a space control centre. Mauritius is already part of the Square Kilometre Array (SKA) and hopefully there will be more activities into that direction in the near future. Community - Awareness and collaboration As stated earlier, I could only spent one morning but luckily other members of the MSCC and the LUGM stayed during the whole two days and provided answers to any interested person. As for me, I took the opportunity to get in touch with the other companies in the lobby. Mainly, to create some awareness about our IT communities but also to see whether there might be options for future engagement in common activities, too. So far, I was able to speak to representatives of the following companies: ACCA Mauritius Business at Work Infomil LinkByNet Microsoft Indian Ocean Islands & French Pacific Spherinity Training Institute Spoon Consulting Ltd. State Informatics Ltd. Unfortunately, I only had a quick chat with an HR representative of LinkByNet but I fully count on our MSCC members like Nitin or LUGM member Ronny to spread our intentions over there.  So far, all of the representatives were really interested in our concepts and activities and I'm currently catching up with an introduction flyer for the MSCC that I'm going to send out to all those contacts via mail. It would be great to have more craftsmen as well as professional support on board. Some pictures from the event MSCC: Fantastic outlook for the near future. Announcements were made on Big data, nanotechnology, and space control centre in Mauritius. Interesting! MSCC: The lobby area was cramped with students. Great way to exchange and network. Good luck to all candidates! Passing the relay staff to... I recommend you to continue to read about the first Career & IT Fair on Ish's blog. He has a great summary and more details on those two days of IT activities than I have. Thanks and feel free to leave a comment (or two)... 

  Read the article

• MySql for Visual Studio 1.0.2 GA has been released

  - by fernando

  MySQL for Visual Studio is a new product including all of the Visual Studio integration previously available as part of Connector/Net.  The product is now released as GA and is appropriate for use in production environments.  It is compatible with MySQL Server versions 5.0-5.7 and Visual Studio versions 2008-2012.  It is now available as part of MySql Installer for Windows (http://dev.mysql.com/tech-resources/articles/mysql-installer-for-windows.html). The 1.0 version of MySQL for Visual Studio brings the following new features:   Workbench Launching.   MySql Utilities Launching.   Table Script Generation.   The functionality of the core libraries (ADO.NET, EF, ASP.NET providers is available as the separate download of Connector/NET 6.7). Features available from previous versions:        Server explorer connections     Design time support     Entity Framework designer (Database First & Model First)     Stored Routines Debugger     Intellisense     ASP.NET Website Configuration Tool Workbench Launching  ------------------------------------------- A context menu for connections in Server Explorer allows to launch Workbench (if Workbench is installed). MySql Utilities Launching  ------------------------------------------- A context menu for connections in Server Explorer allows to launch a prompt for MySql Utilities (if MySql Utilities is installed). Table Script Generation  ------------------------------------------- A context menu for tables is available in Server Explorer to generate the script for a table. The full list of bug fixes for "MySql for Visual Studio" 1.0 follows: 1.0.2 - Fix for Documentation not found (Oracle bug #6915712). - Fix for intellisense completion, now Views are displayed together with Tables calling intellisense (Oracle Bug #16881451). - Fix for parser syntax, now the parser supports the clause ALTER TABLE table_name RENAME {INDEX|KEY} old_index_name TO new_index_name introduced in MySql 5.7. (Oracle Bug #16881481) - Fix for Debugging a routine produces an error when binary log is enabled (Oracle bug #16941181). - Fix for WorkItem 552: MySql for Visual Studio Installer fails when installing against VS2008. - Fix for bug Vs plugin installer is not working (Oracle bug #16973339). - Fix for bug Release notes file has no notes about (Oracle bug #16973326). 1.0.1 - Fix for "README" file and "Release Notes" file referes to connector 6.6. - Fix for Parser fails to recognizes a complex view (Oracle bug #16815427). - Fix for Altering table's primary key in designer not working (Oracle bug #16866053). - Fix for Web configuration tool is not shown on mysql for visual studio (Oracle bug # 16902696). - Fix for Model first is not supported using mysql for visual studio (Oracle bug # 16902743). - Fix for Mysql for vs should not be installed with connector/net version < 6.7 (Oracle bug # 16902774). - Fix for Resolve assemblies dependencies between MySql.Data (Connector/Net version) and MySql.Data (WI # 460). - Fix for Showing an exception related to resources (Oracle bug #16903039). 1.0.0 - Added new option on Connection Node for Server Explorer Window in Visual Studio to give the user the option when WB is Installed to open the MySQL Utilities console window. - Added new option on Connection Node for Server Explorer Window in Visual Studio to give the user the option when WB is Installed to open the SQL Editor Window using the same connection. - Implemented a menu option to generate table script from server explorer context menu (Tracker task 433). - Fix for bug If using repair option, then vs2010 doesnt allow to connect to db (Oracle bug #16238242). - Fix for bug "Can't change the name for a view in view editor" (Oracle bug #13805346). - Fix for Debugger cannot debug stored procedures with a main begin labeled and declare statements included (Oracle bug #16002371). - Fix for bug If using repair option at Installer, then vs2010 doesnt allow to connect to db (Oracle bug #16238242). - Fix for "Cannot change the name for a Foreign Key in table designer" (Oracle bug #16238068). - Fix for error when trying to set primary key for a column with same name as mysql keyword (like INT) in table designer   (Oracle bug #16238102). - Fix for databases not displayed in connect dialog for mysql script when correcting credentials, after entering a bad password   (Oracle bug #13805337). - Fix for Debugger fails trying to debug a stored routine in a MySql server hosted in linux without lower_case_table_names option enabled   (MySql bug #69065, Oracle bug #16770384). - Fix for Debugger issue, Values through watch tab shouldn't allow to be modified (Oracle bug #14545448). - Fix for Visual Studio Mysql editor colors cannot be customized (Oracle bug #16453324, MySql bug #67994). The documentation is available as part of Connector/NET at http://dev.mysql.com/doc/refman/5.7/en/connector-net.html  Enjoy and thanks for the support!  --  Fernando Gonzalez Sanchez | Software Engineer |  Oracle MySQL Windows Experience Team, Connector/NET  Guadalajara | Jalisco | Mexico

  Read the article

• Beginner Guide to User Styles for Firefox

  - by Asian Angel

  While the default styles for most websites are nice there may be times when you would love to tweak how things look. See how easy it can be to change how websites look with the Stylish Extension for Firefox. Note: Scripts from Userstyles.org can also be added to Greasemonkey if you have it installed. Getting Started After installing the extension you will be presented with a first run page. You may want to keep it open so that you can browse directly to the Userstyles.org website using the link in the upper left corner. In the lower right corner you will have a new Status Bar Icon. If you have used Greasemonkey before this icon works a little differently. It will be faded out due to no user style scripts being active at the moment. You can use either a left or right click to access the Context Menu. The user style script management section is also added into your Add-ons Management Window instead of being separate. When you reach the user style scripts homepage you can choose to either learn more about the extension & scripts or… Start hunting for lots of user style script goodness. There will be three convenient categories to get you jump-started if you wish. You could also conduct a search if you have something specific in mind. Here is some information directly from the website provided for your benefit. Notice the reference to using these scripts with Greasemonkey… This section shows you how the scripts have been categorized and can give you a better idea of how to search for something more specific. Finding & Installing Scripts For our example we decided to look at the Updated Styles Section”first. Based on the page number listing at the bottom there are a lot of scripts available to look through. Time to refine our search a little bit… Using the drop-down menu we selected site styles and entered Yahoo in the search blank. Needless to say 5 pages was a lot easier to look through than 828. We decided to install the Yahoo! Result Number Script. When you do find a script (or scripts) that you like simply click on the Install with Stylish Button. A small window will pop up giving you the opportunity to preview, proceed with the installation, edit the code, or cancel the process. Note: In our example the Preview Function did not work but it may be something particular to the script or our browser’s settings. If you decide to do some quick editing the window shown above will switch over to this one. To return to the previous window and install the user style script click on the Switch to Install Button. After installing the user style the green section in the script’s webpage will actually change to this message… Opening up the Add-ons Manager Window shows our new script ready to go. The script worked perfectly when we conducted a search at Yahoo…the Status Bar Icon also changed from faded out to full color (another indicator that everything is running nicely). Conclusion If you prefer a custom look for your favorite websites then you can have a lot of fun experimenting with different user style scripts. Note: See our article here for specialized How-To Geek User Style Scripts that can be added to your browser. Links Download the Stylish Extension (Mozilla Add-ons) Visit the Userstyles.org Website Install the Yahoo! Result Number User Style Similar Articles Productive Geek Tips Spice Up that Boring about:blank Page in FirefoxExpand the Add Bookmark Dialog in Firefox by DefaultEnjoy How-To Geek User Style Script GoodnessAuto-Hide Your Cluttered Firefox Status Bar ItemsBeginner Geek: Delete User Accounts in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Availability Best Practices on Oracle VM Server for SPARC

  - by jsavit

  This is the first of a series of blog posts on configuring Oracle VM Server for SPARC (also called Logical Domains) for availability. This series will show how to how to plan for availability, improve serviceability, avoid single points of failure, and provide resiliency against hardware and software failures. Availability is a broad topic that has filled entire books, so these posts will focus on aspects specifically related to Oracle VM Server for SPARC. The goal is to improve Reliability, Availability and Serviceability (RAS): An article defining RAS can be found here. Oracle VM Server for SPARC Principles for Availability Let's state some guiding principles for availability that apply to Oracle VM Server for SPARC: Avoid Single Points Of Failure (SPOFs). Systems should be configured so a component failure does not result in a loss of application service. The general method to avoid SPOFs is to provide redundancy so service can continue without interruption if a component fails. For a critical application there may be multiple levels of redundancy so multiple failures can be tolerated. Oracle VM Server for SPARC makes it possible to configure systems that avoid SPOFs. Configure for availability at a level of resource and effort consistent with business needs. Effort and resource should be consistent with business requirements. Production has different availability requirements than test/development, so it's worth expending resources to provide higher availability. Even within the category of production there may be different levels of criticality, outage tolerances, recovery and repair time requirements. Keep in mind that a simple design may be more understandable and effective than a complex design that attempts to "do everything". Design for availability at the appropriate tier or level of the platform stack. Availability can be provided in the application, in the database, or in the virtualization, hardware and network layers they depend on - or using a combination of all of them. It may not be necessary to engineer resilient virtualization for stateless web applications applications where availability is provided by a network load balancer, or for enterprise applications like Oracle Real Application Clusters (RAC) and WebLogic that provide their own resiliency. It's (often) the same architecture whether virtual or not: For example, providing resiliency against a lost device path or failing disk media is done for the same reasons and may use the same design whether in a domain or not. It's (often) the same technique whether using domains or not: Many configuration steps are the same. For example, configuring IPMP or creating a redundant ZFS pool is pretty much the same within the guest whether you're in a guest domain or not. There are configuration steps and choices for provisioning the guest with the virtual network and disk devices, which we will discuss. Sometimes it is different using domains: There are new resources to configure. Most notable is the use of alternate service domains, which provides resiliency in case of a domain failure, and also permits improved serviceability via "rolling upgrades". This is an important differentiator between Oracle VM Server for SPARC and traditional virtual machine environments where all virtual I/O is provided by a monolithic infrastructure that itself is a SPOF. Alternate service domains are widely used to provide resiliency in production logical domains environments. Some things are done via logical domains commands, and some are done in the guest: For example, with Oracle VM Server for SPARC we provide multiple network connections to the guest, and then configure network resiliency in the guest via IP Multi Pathing (IPMP) - essentially the same as for non-virtual systems. On the other hand, we configure virtual disk availability in the virtualization layer, and the guest sees an already-resilient disk without being aware of the details. These blogs will discuss configuration details like this. Live migration is not "high availability" in the sense of "continuous availability": If the server is down, then you don't live migrate from it! (A cluster or VM restart elsewhere would be used). However, live migration can be part of the RAS (Reliability, Availability, Serviceability) picture by improving Serviceability - you can move running domains off of a box before planned service or maintenance. The blog Best Practices - Live Migration on Oracle VM Server for SPARC discusses this. Topics Here are some of the topics that will be covered: Network availability using IP Multipathing and aggregates Disk path availability using virtual disks defined with multipath groups ("mpgroup") Disk media resiliency configuring for redundant disks that can tolerate media loss Multiple service domains - this is probably the most significant item and the one most specific to Oracle VM Server for SPARC. It is very widely deployed in production environments as the means to provide network and disk availability, but it can be confusing. Subsequent articles will describe why and how to configure multiple service domains. Note, for the sake of precision: an I/O domain is any domain that has a physical I/O resource (such as a PCIe bus root complex). A service domain is a domain providing virtual device services to other domains; it is almost always an I/O domain too (so it can have something to serve). Resources Here are some important links; we'll be drawing on their content in the next several articles: Oracle VM Server for SPARC Documentation Maximizing Application Reliability and Availability with SPARC T5 Servers whitepaper by Gary Combs Maximizing Application Reliability and Availability with the SPARC M5-32 Server whitepaper by Gary Combs Summary Oracle VM Server for SPARC offers features that can be used to provide highly-available environments. This and the following blog entries will describe how to plan and deploy them.

  Read the article

• My First Weeks at Red Gate

  - by Jess Nickson

  Hi, my name’s Jess and early September 2012 I started working at Red Gate as a Software Engineer down in The Agency (the Publishing team). This was a bit of a shock, as I didn’t think this team would have any developers! I admit, I was a little worried when it was mentioned that my role was going to be different from normal dev. roles within the company. However, as luck would have it, I was placed within a team that was responsible for the development and maintenance of Simple-Talk and SQL Server Central (SSC). I felt rather unprepared for this role. I hadn’t used many of the technologies involved and of those that I had, I hadn’t looked at them for quite a while. I was, nevertheless, quite excited about this turn of events. As I had predicted, the role has been quite challenging so far. I expected that I would struggle to get my head round the large codebase already in place, having never used anything so much as a fraction of the size of this before. However, I was perhaps a bit naive when it came to how quickly things would move. I was required to start learning/remembering a number of different languages and technologies within time frames I would never have tried to set myself previously. Having said that, my first week was pretty easy. It was filled with meetings that were designed to get the new starters up to speed with the different departments, ideals and rules within the company. I also attended some lightning talks being presented by other employees, which were pretty useful. These occur once a fortnight and normally consist of around four speakers. In my spare time, we set up the Simple-Talk codebase on my computer and I started exploring it and worked on my first feature – redirecting requests for URLs that used incorrect casing! It was also during this time that I was given my first introduction to test-driven development (TDD) with Michael via a code kata. Although I had heard of the general ideas behind TDD, I had definitely never tried it before. Indeed, I hadn’t really done any automated testing of code before, either. The session was therefore very useful and gave me insights as to some of the coding practices used in my team. Although I now understand the importance of TDD, it still seems odd in my head and I’ve yet to master how to sensibly step up the functionality of the code a bit at a time. The second week was both easier and more difficult than the first. I was given a new project to work on, meaning I was no longer using the codebase already in place. My job was to take some designs, a WordPress theme, and some initial content and build a page that allowed users of the site to read provided resources and give feedback. This feedback could include their thoughts about the resource, the topics covered and the page design itself. Although it didn’t sound the most challenging of projects when compared to fixing bugs in our current codebase, it nevertheless provided a few sneaky problems that had me stumped. I really enjoyed working on this project as it allowed me to play around with HTML, CSS and JavaScript; all things that I like working with but rarely have a chance to use. I completed the aims for the project on time and was happy with the final outcome – though it still needs a good designer to take a look at it! I am now into my third week at Red Gate and I have temporarily been pulled off the website from week 2. I am again back to figuring out the Simple-Talk codebase. Monday provided me with the chance to learn a bunch of new things: system level testing, Selenium and Python. I was set the challenge of testing a bug fix dealing with the search bars in Simple-Talk. The exercise was pretty fun, although Mike did have to point me in the right direction when I started making the tests a bit too complex. The rest of the week looks set to be focussed on pair programming with Mike as we work together on a new feature. I look forward to the challenges that still face me and hope that I will be able to get up to speed quickly. *fingers crossed*

  Read the article

• Unmet Dependencies with kdelibs5-data

  - by Jitesh

  I was trying to install Amarok 1.4 on Ubuntu 12.04 (Gnome-classic), by following this instructions. Problem started after giving these two commands dpkg -i kdelibs5-data_4.6.2-0ubuntu4_all.deb dpkg -i kdelibs-data_3.5.10.dfsg.1-5ubuntu2_all.deb Now, immediately after these commands, Ubuntu Updater popped up and gave me an error that the package catalog is broken and needs to be repaired. Nothing can be installed or removed till then. It also offered a suggestion to run apt-get install -f. I tried that, but again got the same error.Also tried apt-get clean followed by apt-get install -f. Again got the following output: jitesh@jitesh-desktop:~$ sudo apt-get clean jitesh@jitesh-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: kdelibs5-data The following packages will be upgraded: kdelibs5-data 1 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. Need to get 2,832 kB of archives. After this operation, 2,998 kB disk space will be freed. Do you want to continue [Y/n]? y Get:1 http: //in.archive.ubuntu.com/ubuntu/precise-updates/main kdelibs5-data all 4:4.8.4a-0ubuntu0.2 [2,832 kB] Fetched 2,832 kB in 32s (86.6 kB/s) dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: kdelibs5-data kdelibs-data W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) W: You may want to run apt-get update to correct these problems E: Sub-process /usr/bin/dpkg returned an error code (1) As I thought the error was related to configuring kdelibs, I tried to configure using dpkg. But got the following errors: jitesh@jitesh-desktop:~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: kdelibs5-data kdelibs-data jitesh@jitesh-desktop:~$ Now I dont have any idea how to proceed. I am unable to install anything from Software Centre or using Terminal now. Some basic info: Core2Duo, dual booting Ubuntu 12.04 with Win7. Fresh install of Ubuntu 12.04 (not upgrade). Incidentally, I had first upgraded from 10.04 and had succesfully installed Amarok 1.4 following this same method. But due to other issues, i had to format and do a clean install of 12.04. Now when I tried to install Amarok 1.4, I'm getting these errors. I also have digiKam and k3b installed, if that can be of any help. I use digiKam a lot, so removing KDE is not feasible for me. Any help on this issue will be highly appreciated. Thanks in advance.

  Read the article

• Design Pattern for Complex Data Modeling

  - by Aaron Hayman

  I'm developing a program that has a SQL database as a backing store. As a very broad description, the program itself allows a user to generate records in any number of user-defined tables and make connections between them. As for specs: Any record generated must be able to be connected to any other record in any other user table (excluding itself...the record, not the table). These "connections" are directional, and the list of connections a record has is user ordered. Moreover, a record must "know" of connections made from it to others as well as connections made to it from others. The connections are kind of the point of this program, so there is a strong possibility that the number of connections made is very high, especially if the user is using the software as intended. A record's field can also include aggregate information from it's connections (like obtaining average, sum, etc) that must be updated on change from another record it's connected to. To conserve memory, only relevant information must be loaded at any one time (can't load the entire database in memory at load and go from there). I cannot assume the backing store is local. Right now it is, but eventually this program will include syncing to a remote db. Neither the user tables, connections or records are known at design time as they are user generated. I've spent a lot of time trying to figure out how to design the backing store and the object model to best fit these specs. In my first design attempt on this, I had one object managing all a table's records and connections. I attempted this first because it kept the memory footprint smaller (records and connections were simple dicts), but maintaining aggregate and link information between tables became....onerous (ie...a huge spaghettified mess). Tracing dependencies using this method almost became impossible. Instead, I've settled on a distributed graph model where each record and connection is 'aware' of what's around it by managing it own data and connections to other records. Doing this increases my memory footprint but also let me create a faulting system so connections/records aren't loaded into memory until they're needed. It's also much easier to code: trace dependencies, eliminate cycling recursive updates, etc. My biggest problem is storing/loading the connections. I'm not happy with any of my current solutions/ideas so I wanted to ask and see if anybody else has any ideas of how this should be structured. Connections are fairly simple. They contain: fromRecordID, fromTableID, fromRecordOrder, toRecordID, toTableID, toRecordOrder. Here's what I've come up with so far: Store all the connections in one big table. If I do this, either I load all connections at once (one big db call) or make a call every time a user table is loaded. The big issue here: the size of the connections table has the potential to be huge, and I'm afraid it would slow things down. Store in separate tables all the outgoing connections for each user table. This is probably the worst idea I've had. Now my connections are 'spread out' over multiple tables (one for each user table), which means I have to make a separate DB called to each table (or make a huge join) just to find all the incoming connections for a particular user table. I've avoided making "one big ass table", but I'm not sure the cost is worth it. Store in separate tables all outgoing AND incoming connections for each user table (using a flag to distinguish between incoming vs outgoing). This is the idea I'm leaning towards, but it will essentially double the total DB storage for all the connections (as each connection will be stored in two tables). It also means I have to make sure connection information is kept in sync in both places. This is obviously not ideal but it does mean that when I load a user table, I only need to load one 'connection' table and have all the information I need. This also presents a separate problem, that of connection object creation. Since each user table has a list of all connections, there are two opportunities for a connection object to be made. However, connections objects (designed to facilitate communication between records) should only be created once. This means I'll have to devise a common caching/factory object to make sure only one connection object is made per connection. Does anybody have any ideas of a better way to do this? Once I've committed to a particular design pattern I'm pretty much stuck with it, so I want to make sure I've come up with the best one possible.

  Read the article

• Discover What Powers Your Favorite Websites

  - by Matthew Guay

  Have you ever wondered if the site you’re visiting is powered by WordPress or if the webapp you’re using is powered by Ruby on Rails?  With these extensions for Google Chrome, you’ll never have to wonder again. Geeks love digging under the hood to see what makes their favorite apps and sites tick.  But opening the “View Source” window today doesn’t tell you everything there is to know about a website.  Plus, even if you can tell what CMS is powering a website from its source, it can be tedious to dig through lines of code to find what you’re looking for.  Also, the HTML code never tells you what web server a site is running on or what version of PHP it’s using.  With three extensions for Google Chrome you’ll never have to wonder again.  Note that some sites may not give as much information, but still, you’ll find enough data from most sites to be interesting. Discover Web Frameworks and Javascript Libraries with Chrome Sniffer If you want to know what CMS is powering a site or if it’s using Google Analytics or Quantcast, this is the extension for you.  Chrome Sniffer (link below) identifies over 40 different frameworks, and is constantly adding more.  It shows the logo of the main framework on the site on the left of your address bar.  Here wee see Chrome Sniffer noticed that How-To Geek is powered by WordPress.   Click the logo to see other frameworks on the site.  We can see that the site also has Google Analytics and Quantcast.  If you want more information about the framework, click on its logo and the framework’s homepage will open in a new tab. As another example, we can see that the Tumblr Staff blog is powered by Tumblr (of course), the Discus comment system, Quantcast, and the Prototype JavaScript framework. Or here’s a site that’s powered by Drupal, Google Analytics, Mollom spam protection, and jQuery.  Chrome Sniffer definitely uncovers a lot of neat stuff, so if you’re into web frameworks you’re sure to enjoy this extension. Find Out What Web Server The Site is Running On Want to know whether the site you’re looking at is running on IIS or Appache?  The Web Server Notifier extension for Chrome (link below) lets you easily recognize the web server a site is running on by its favicon on the right of the address bar.  Click the icon to see more information. Some web servers will show you a lot of information about their server, including version, operating system, PHP version, OpenSSL version, and more. Others will simply tell you their name. If the site is powered by IIS, you can usually tell the version of Windows Server its running on since the IIS versions are specific to a version of Windows.  Here we see that Microsoft.com is running on the latest and greatest – Windows Server 2008 R2 with IIS 7.5. Discover Web Technologies Powering Sites Wondering if a webapp is powered by Ruby on Rails or ASP.NET?  The Web Technology Notifier extension for Chrome (link below), from the same developer as the Web Server Notifier, will let you easily discover the backend of a site.  You’ll see the technology’s favicon on the right of your address bar, and, as with the other extension, can get more information by clicking the icon. Here we can see that Backpack from 37signals is powered by the Phusion Passenger module to run Ruby on Rails.   Microsoft’s new Docs.com Office Online apps is powered by ASP.NET…   And How-To Geek has PHP running to power WordPress. Conclusion With all these tools at hand, you can find out a lot about your favorite sites.  For example, with all three extensions we can see that How-To Geek runs on WordPress with PHP, uses Google Analytics and Quantcast, and is served by the LightSpeed web server.  Fun info, huh?   Links Download the Chrome Sniffer extension Download the Web Server Notifier extension Download the Web Technology Notifier extension Similar Articles Productive Geek Tips Enjoy a Clean Start Page with New Tab PageEnjoy Image Zooming on Your Favorite Photo Websites in ChromeAdd Your Own Folders to Favorites in Windows 7Find User Scripts for Your Favorite Websites the Easy WayAdd Social Elements to Your Gmail Contacts with Rapportive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Silverlight Cream Monday WP7 App Review # 1

  - by Dave Campbell

  I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Basic WCF Unit Testing

  - by Brian

  Coming from someone who loves the KISS method, I was surprised to find that I was making something entirely too complicated. I know, shocker right? Now I'm no unit testing ninja, and not really a WCF ninja either, but had a desire to test service calls without a) going to a database, or b) making sure that the entire WCF infrastructure was tip top. Who does? It's not the environment I want to test, just the logic I’ve written to ensure there aren't any side effects. So, for the K.I.S.S. method: Assuming that you're using a WCF service library (you are using service libraries correct?), it's really as easy as referencing the service library, then building out some stubs for bunking up data. The service contract We’ll use a very basic service contract, just for getting and updating an entity. I’ve used the default “CompositeType” that is in the template, handy only for examples like this. I’ve added an Id property and overridden ToString and Equals. [ServiceContract] public interface IMyService { [OperationContract] CompositeType GetCompositeType(int id); [OperationContract] CompositeType SaveCompositeType(CompositeType item); [OperationContract] CompositeTypeCollection GetAllCompositeTypes(); } The implementation When I implement the service, I want to be able to send known data into it so I don’t have to fuss around with database access or the like. To do this, I first have to create an interface for my data access: public interface IMyServiceDataManager { CompositeType GetCompositeType(int id); CompositeType SaveCompositeType(CompositeType item); CompositeTypeCollection GetAllCompositeTypes(); } For the purposes of this we can ignore our implementation of the IMyServiceDataManager interface inside of the service. Pretend it uses LINQ to Entities to map its data, or maybe it goes old school and uses EntLib to talk to SQL. Maybe it talks to a tape spool on a mainframe on the third floor. It really doesn’t matter. That’s the point. So here’s what our service looks like in its most basic form: public CompositeType GetCompositeType(int id) { //sanity checks if (id == 0) throw new ArgumentException("id cannot be zero."); return _dataManager.GetCompositeType(id); } public CompositeType SaveCompositeType(CompositeType item) { return _dataManager.SaveCompositeType(item); } public CompositeTypeCollection GetAllCompositeTypes() { return _dataManager.GetAllCompositeTypes(); } But what about the datamanager? The constructor takes care of that. I don’t want to expose any testing ability in release (or the ability for someone to swap out my datamanager) so this is what we get: IMyServiceDataManager _dataManager; public MyService() { _dataManager = new MyServiceDataManager(); } #if DEBUG public MyService(IMyServiceDataManager dataManager) { _dataManager = dataManager; } #endif The Stub Now it’s time for the rubber to meet the road… Like most guys that ever talk about unit testing here’s a sample that is painting in *very* broad strokes. The important part however is that within the test project, I’ve created a bunk (unit testing purists would say stub I believe) object that implements my IMyServiceDataManager so that I can deal with known data. Here it is: internal class FakeMyServiceDataManager : IMyServiceDataManager { internal FakeMyServiceDataManager() { Collection = new CompositeTypeCollection(); Collection.AddRange(new CompositeTypeCollection { new CompositeType { Id = 1, BoolValue = true, StringValue = "foo 1", }, new CompositeType { Id = 2, BoolValue = false, StringValue = "foo 2", }, new CompositeType { Id = 3, BoolValue = true, StringValue = "foo 3", }, }); } CompositeTypeCollection Collection { get; set; } #region IMyServiceDataManager Members public CompositeType GetCompositeType(int id) { if (id <= 0) return null; return Collection.SingleOrDefault(m => m.Id == id); } public CompositeType SaveCompositeType(CompositeType item) { var existing = Collection.SingleOrDefault(m => m.Id == item.Id); if (null != existing) { Collection.Remove(existing); } if (item.Id == 0) { item.Id = Collection.Count > 0 ? Collection.Max(m => m.Id) + 1 : 1; } Collection.Add(item); return item; } public CompositeTypeCollection GetAllCompositeTypes() { return Collection; } #endregion } So it’s tough to see in this example why any of this is necessary, but in a real world application you would/should/could be applying much more logic within your service implementation. This all serves to ensure that between refactorings etc, that it doesn’t send sparking cogs all about or let the blue smoke out. Here’s a simple test that brings it all home, remember, broad strokes: [TestMethod] public void MyService_GetCompositeType_ExpectedValues() { FakeMyServiceDataManager fake = new FakeMyServiceDataManager(); MyService service = new MyService(fake); CompositeType expected = fake.GetCompositeType(1); CompositeType actual = service.GetCompositeType(2); Assert.AreEqual<CompositeType>(expected, actual, "Objects are not equal. Expected: {0}; Actual: {1};", expected, actual); } Summary That’s really all there is to it. You could use software x or framework y to do the exact same thing, but in my case I just didn’t really feel like it. This speaks volumes to my not yet ninja unit testing prowess.

  Read the article

• Using Windows Previous Versions to access ZFS Snapshots (July 14, 2009)

  - by user12612012

  The Previous Versions tab on the Windows desktop provides a straightforward, intuitive way for users to view or recover files from ZFS snapshots.  ZFS snapshots are read-only, point-in-time instances of a ZFS dataset, based on the same copy-on-write transactional model used throughout ZFS.  ZFS snapshots can be used to recover deleted files or previous versions of files and they are space efficient because unchanged data is shared between the file system and its snapshots.  Snapshots are available locally via the .zfs/snapshot directory and remotely via Previous Versions on the Windows desktop. Shadow Copies for Shared Folders was introduced with Windows Server 2003 but subsequently renamed to Previous Versions with the release of Windows Vista and Windows Server 2008.  Windows shadow copies, or snapshots, are based on the Volume Snapshot Service (VSS) and, as the [Shared Folders part of the] name implies, are accessible to clients via SMB shares, which is good news when using the Solaris CIFS Service.  And the nice thing is that no additional configuration is required - it "just works". On Windows clients, snapshots are accessible via the Previous Versions tab in Windows Explorer using the Shadow Copy client, which is available by default on Windows XP SP2 and later.  For Windows 2000 and pre-SP2 Windows XP, the client software is available for download from Microsoft: Shadow Copies for Shared Folders Client. Assuming that we already have a shared ZFS dataset, we can create ZFS snapshots and view them from a Windows client. zfs snapshot tank/home/administrator@snap101zfs snapshot tank/home/administrator@snap102 To view the snapshots on Windows, map the dataset on the client then right click on a folder or file and select Previous Versions.  Note that Windows will only display previous versions of objects that differ from the originals.  So you may have to modify files after creating a snapshot in order to see previous versions of those files. The screenshot above shows various snapshots in the Previous Versions window, created at different times.  On the left panel, the .zfs folder is visible, illustrating that this is a ZFS share.  The .zfs setting can be toggled as desired, it makes no difference when using previous versions.  To make the .zfs folder visible: zfs set snapdir=visible tank/home/administrator To hide the .zfs folder: zfs set snapdir=hidden tank/home/administrator The following screenshot shows the Previous Versions panel when a file has been selected.  In this case the user is prompted to view, copy or restore the file from one of the available snapshots. As can be seen from the screenshots above, the Previous Versions window doesn't display snapshot names: snapshots are listed by snapshot creation time, sorted in time order from most recent to oldest.  There's nothing we can do about this, it's the way that the interface works.  Perhaps one point of note, to avoid confusion, is that the ZFS snapshot creation time isnot the same as the root directory creation timestamp. In ZFS, all object attributes in the original dataset are preserved when a snapshot is taken, including the creation time of the root directory.  Thus the root directory creation timestamp is the time that the directory was created in the original dataset. # ls -d% all /home/administrator         timestamp: atime         Mar 19 15:40:23 2009         timestamp: ctime         Mar 19 15:40:58 2009         timestamp: mtime         Mar 19 15:40:58 2009         timestamp: crtime         Mar 19 15:18:34 2009 # ls -d% all /home/administrator/.zfs/snapshot/snap101         timestamp: atime         Mar 19 15:40:23 2009         timestamp: ctime         Mar 19 15:40:58 2009         timestamp: mtime         Mar 19 15:40:58 2009         timestamp: crtime         Mar 19 15:18:34 2009 The snapshot creation time can be obtained using the zfs command as shown below. # zfs get all tank/home/administrator@snap101NAME                             PROPERTY  VALUEtank/home/administrator@snap101  type      snapshottank/home/administrator@snap101  creation  Mon Mar 23 18:21 2009 In this example, the dataset was created on March 19th and the snapshot was created on March 23rd. In conclusion, Shadow Copies for Shared Folders provides a straightforward way for users to view or recover files from ZFS snapshots.  The Windows desktop provides an easy to use, intuitive GUI and no configuration is required to use or access previous versions of files or folders. REFERENCES FOR MORE INFORMATION ZFS ZFS Learning Center Introduction to Shadow Copies of Shared Folders Shadow Copies for Shared Folders Client

  Read the article

• Can Kind People Finish First?

  - by Oracle Accelerate for Midsize Companies

  by Jim Lein, Oracle Midsize Programs In an earlier post, I expressed my undying love for KIND Snacks' products. This month's Oracle Profit magazine features an interview with KIND Healthy Snacks Founder and CEO Daniel Lubetzky entitled "Better Business". Lubetzky expresses his vision for making KIND a "not for profit only" company.  All great companies start with a good idea. In this case, that one great idea was to offer a healthy snack with ingredients you can "see and pronounce". That's one of things I really like about this company--that coupled with the fact that their snacks taste great. They compete in an over crowded playing field but I've found that it's rare to find an energy snack that both tastes good and is good for you.  A couple of interesting facts I learned from reading this article: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} 9 out of 10 consumers who try a KIND bar will purchase a KIND product again and recommend it to others KIND has the highest Net Promoter Score among the top 10 brands in the nutritional bar category (I confess I've never heard about this rating before but now that I have it's pretty cool) KIND's coporate mantra, "Do the Kind Thing" both encourages people to do random acts of kindness and provides easy mechanisms for doing so. Not coincidentally, I think, KIND is indeed a story about how nice guys can finish first. KIND has doubled in size every year for the last ten  years and now employees over 300 people, with sales exceeding $120M annually. Growth Applies Pressures One thing I know for certain from interacting our with fast growing customers over the last fifteen years is that growth applies myriad pressures across the organization--resources, processes, technology systems, and leadership agility. And it's easy to forget that Oracle was once an entrepreneurial startup and experienced all those same pressures that other growing companies are experiencing today. When asked by Profit Editor in Chief Aaron Lazenby, " What sort of pressure does KIND"s growth and success place on operations?", Lubetzky responded, "We have a demand planning process right now that is manual to a significant extent, and it just takes so much management time. It takes us days and sometimes weeks to produce information that is critical to our business—and by the time we get the results, we need revised data. Our sales leadership could go out selling, but instead they’re talking to our team about forecasts." Hitching Your Wagon to Oracle Lubetzky and his team selected Oracle for what I believe is our company's greatest strength: hitch your wagon to Oracle and you can trust that we will be there for the long run with the solutions you need and financial staying power. In Lubetzky's words, "The KIND philosophy requires you to have a long-term view of things; taking shortcuts may be the fastest way to get things done, but in the long term that can come back and bite you. Oracle is the type of company—and has the kind of platform—that is here for the long term. It’s not going to go away tomorrow. And Oracle is going to invest all the necessary resources into staying ahead of the game and improving." o next time you're in the supermarket or an REI (my favorite store in the world) or any of the other 80,000 locations that carry KIND, give one a try. Maybe some day you'll want to become a KIND Brand Ambassador.   Looking for more news and information about Oracle Solutions for Midsize Companies? Read the latest Oracle for Midsize Companies Newsletter Sign-up to receive the latest communications from Oracle’s industry leaders and experts Jim Lein I evangelize Oracle's enterprise solutions for growing midsize companies. I recently celebrated 15 years with Oracle, having joined JD Edwards in 1999. I'm based in Evergreen, Colorado and love relating stories about creativity and innovation whether they be about software, live music, or the mountains. The views expressed here are my own, and not necessarily those of Oracle.

  Read the article

• Updated Agenda for OTN Architect Day Los Angeles (Oct 25)

  - by Bob Rhubart

  Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Los Angeles on October 25, 2012. Registration is open, but seating is limited. When: Thursday October 25 12, 2012 8:30am – 5:00pm Where: Sofitel Los Angeles 8555 Beverly Boulevard Los Angeles, CA 90048 Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Beverly Ballroom 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Beverly Ballroom 10:00 am - 10:30 am Monitoring and Managing Applications in the Cloud | Basheer Khan Oracle offers a broad portfolio of software and hardware products and services to enable public, private and hybrid clouds to power the enterprise. However, enterprise cloud computing presents new management challenges, that need to be addressed to realize the economic benefits of cloud computing. In this session you will learn about the methods and tools you can use to proactively monitor your end-to-end Oracle Applications environment in the cloud, define service-level objectives, gain insight into your end users, and troubleshoot performance problems from a single console. Beverly Ballroom 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Dr. James Baty The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Beverly Ballroom Innovations in Grid Computing with Oracle Coherence | Ashok Aletty Learn how Oracle Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Hollywood Room 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Beverly Ballroom Oracle Enterprise Manager | Perren Walker This session examines new Oracle Enterprise Manager monitoring, administration, and management features for Oracle Exalogic. It focuses on two management themes: cloud management related to virtualization and applications-to-disk management. For private cloud management, it discusses virtualization management features providing an enhanced set of application deployment capabilities enabling IaaS as well as PaaS interactions. Then from an end-to-end perspective, it covers the specific capabilities and—where applicable—best practices for machine, cloud, middleware, and application administration. Hollywood Room 12:15 pm - 1:15 pm Lunch Beverly Ballroom Lounge 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Beverly Ballroom 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy ETS). Beverly Ballroom 21st Century SOA | Jeff Davies Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. We'll also take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Hollywood Room 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Beverly Ballroom 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Beverly Ballroom 4:15 pm - 5:00 pm Networking / Reception Beverly Ballroom Lounge Note: Session schedule and content subject to change.

  Read the article

< Previous Page | 756 757 758 759 760 761 762 763 764 765 766 767  | Next Page >