Search Results

Search found 31311 results on 1253 pages for 'oracle product info'.

Page 766/1253 | < Previous Page | 762 763 764 765 766 767 768 769 770 771 772 773  | Next Page >

• My service does not start on Windows 2008 (it works on Windows 2003)

  - by akirekadu

  When we install our product on Windows 2008 SP2, couple of services fail to start. After trying different things, we figured out that these service were able to start when "Log on as" is set to "Local system account". This service does need to run as a specific user because it requires access to secure resources. The service did run just fine under this special user account under Windows 2003. I am thinking the problem is related to UAC (user access control). Under interactive mode one can elevate permission by answering the security dialog box. How to do the same for a service? How to configure the service so it runs with necessary permissions? Thanks! Couple of notes I would like to add. One solution I tried is to execute the installer as administrator. The service does get installed. However, it creates another problem. An embedded 3rd party product and its files get installed with admin only rights. So we do need to run the installer as logged in user.

  Read the article

• How to split the story in indesing markup language

  - by BBDeveloper

  Hi All, I am learning indesign, I have a doubt in story splitting... I want to split the story if the same story is used in two different text frames, I am extracting idml file and getting the needed data. My question is, I have a single story which is used by two text frames (Threaded text), and these two textframes are available in two different spreads. Story.xml contains full story, half of the story is displayed in 1st textframe, next half is displayed in 2nd textframe and the same story ID is referred in both the textframes. Now I want to split this story into two, so I want to know that how much content of the story is added in 1st and 2nd textframe, I think if I find that how many characters or words or lines present in each textframe then it will easy to split the story. We can determine the word and character count using the following steps in indesign CS4 Place the insertion point in a text frame to view counts for the entire thread of frames (the story), or select text to view counts only for the selected text. Choose Window Info to display the Info panel. Is there any property or attribute in idml (xml files like prefrence.xml or story.xml or spread.xml) to find out the number of characters/words/lines of single textframe. Can anyone help me to solve this issue. Thanks in advance.

  Read the article

• GAE - Getting TypeError requiring class instance be passed to class's own method...

  - by Spencer Leland

  I'm really new to programming... I set up a class to give supporting information for Google's User API user object. I store this info in the datastore using db.model. When I call the okstatus method of my user_info class using this code: elif user_info.okstatus(user): self.response.out.write("user allowed") I get this error: unbound method okstatus() must be called with user_info instance as first argument (got User instance instead) Here is my user_info class. class user_info: def auth_ctrlr(self, user): if self.status(user) == status_allowed: return ("<a href=\"%s\">Sign Out</a>)" % (users.create_login_url("/"))) else: return ("<a href=\"%s\">Sign In or Get an Account</a>)" % (users.create_logout_url("/"))) def status(self, user): match = sub_user.gql(qu_by_user_id, user.user_id) return match.string_status def group(self, user): match = sub_user.gql(qu_by_user_id, user.user_id) grp = group_names.gql(qu_by_user_id, match.groupID) return grp def okstatus(self, user): match = self.status(user) if match == status_allowed: return True My understanding is that the argument "self" inside the method's calling arguments describes it as a child to the class. I've tried everything I can think of and can't find any related info online. Can someone please tell me what I'm doing wrong? Thanks

  Read the article

• Software Update Notifications

  - by devio

  I am considering implementing some sort of Software Update Notification for one of the web applications I am developing. There are several questions I came across: Should the update check be executed on the client or on the server? Client-side means, the software retrieves the most current version information, performs its checks, and displays the update information. Server-side check means the software sends its version info to the server, which in turn does the calculations and returns information to the client. My guess is that server-side implementation may turn out to be more flexible and more powerful than client-side, as I can add functionality to the server easily, as long as the client understands it. Where should the update info be displayed? Is it ok to display on the login screen? Should only admins see it? (this is a web app with a database, so updating requires manipulation of db and web, which is only done by admins). What about a little beeping flashing icon which increases in size as the version gets more obsolete every day ;) ? Privacy issues Not everybody likes to have their app usage stats broadcast over the internet. TheOnion question: What do you think?

  Read the article

• java heap allocation

  - by gurupriyan.e

  I tried to increase the heap size like the below C:\Data\Guru\Code\Got\adminservice\adminservice>java -Xms512m -Xmx512m Usage: java [-options] class [args...] (to execute a class) or java [-options] -jar jarfile [args...] (to execute a jar file) where options include: -client to select the "client" VM -server to select the "server" VM -hotspot is a synonym for the "client" VM [deprecated] The default VM is client. -cp <class search path of directories and zip/jar files> -classpath <class search path of directories and zip/jar files> A ; separated list of directories, JAR archives, and ZIP archives to search for class files. -D<name>=<value> set a system property -verbose[:class|gc|jni] enable verbose output -version print product version and exit -version:<value> require the specified version to run -showversion print product version and continue -jre-restrict-search | -jre-no-restrict-search include/exclude user private JREs in the version search -? -help print this help message -X print help on non-standard options -ea[:<packagename>...|:<classname>] -enableassertions[:<packagename>...|:<classname>] enable assertions -da[:<packagename>...|:<classname>] -disableassertions[:<packagename>...|:<classname>] disable assertions -esa | -enablesystemassertions enable system assertions -dsa | -disablesystemassertions disable system assertions -agentlib:<libname>[=<options>] load native agent library <libname>, e.g. -agentlib:hprof see also, -agentlib:jdwp=help and -agentlib:hprof=help -agentpath:<pathname>[=<options>] load native agent library by full pathname -javaagent:<jarpath>[=<options>] load Java programming language agent, see java.lang.instrument It gave the help message as above - Does it mean that it was allocated?

  Read the article

• Understanding byte order and functions like CFSwapInt32HostToBig

  - by Typeoneerror

  I've got an enumeration in my game. A simple string message with an appended PacketType is being sent with the message (so it knows what to do with the message) over GameKit WIFI connection. I used Apple's GKRocket sample code as a starting point. The code itself is working fantastically; I just want to understand what the line with CFSwapInt32HostToBig is doing. What on earth does that do? and why does it need to do it? My guess is that it's making sure the PacketType value can be converted to an unsigned integer so it can send it reliably, but that doesn't sound all that correct to me. The documentation states "Converts a 32-bit integer from big-endian format to the host’s native byte order." but I don't understand what the means really. typedef enum { PacketTypeStart, // packet to notify games to start PacketTypeRequestSetup, // server wants client info PacketTypeSetup, // send client info to server PacketTypeSetupComplete, // round trip made for completion PacketTypeTurn, // packet to notify game that a turn is up PacketTypeRoll, // packet to send roll to players PacketTypeEnd // packet to end game } PacketType; // .... - (void)sendPacket:(NSData *)data ofType:(PacketType)type { NSLog(@"sendPacket:ofType(%d)", type); // create the data with enough space for a uint NSMutableData *newPacket = [NSMutableData dataWithCapacity:([data length]+sizeof(uint32_t))]; // Data is prefixed with the PacketType so the peer knows what to do with it. uint32_t swappedType = CFSwapInt32HostToBig((uint32_t)type); // add uint to data [newPacket appendBytes:&swappedType length:sizeof(uint32_t)]; // add the rest of the data [newPacket appendData:data]; // Send data checking for success or failure NSError *error; BOOL didSend = [_gkSession sendDataToAllPeers:newPacket withDataMode:GKSendDataReliable error:&error]; if (!didSend) { NSLog(@"error in sendDataToPeers: %@", [error localizedDescription]); } }

  Read the article

• Test-Driven Development Problem

  - by Zeck

  Hi guys, I'm newbie to Java EE 6 and i'm trying to develop very simple JAX-RS application. RESTfull web service working fine. However when I ran my test application, I got the following. What have I done wrong? Or am i forget any configuration? Of course i'm create a JNDI and i'm using Netbeans 6.8 IDE. In finally, thank you for any advise. My Entity: @Entity @Table(name = "BOOK") @NamedQueries({ @NamedQuery(name = "Book.findAll", query = "SELECT b FROM Book b"), @NamedQuery(name = "Book.findById", query = "SELECT b FROM Book b WHERE b.id = :id"), @NamedQuery(name = "Book.findByTitle", query = "SELECT b FROM Book b WHERE b.title = :title"), @NamedQuery(name = "Book.findByDescription", query = "SELECT b FROM Book b WHERE b.description = :description"), @NamedQuery(name = "Book.findByPrice", query = "SELECT b FROM Book b WHERE b.price = :price"), @NamedQuery(name = "Book.findByNumberofpage", query = "SELECT b FROM Book b WHERE b.numberofpage = :numberofpage")}) public class Book implements Serializable { private static final long serialVersionUID = 1L; @Id @Basic(optional = false) @Column(name = "ID") private Integer id; @Basic(optional = false) @Column(name = "TITLE") private String title; @Basic(optional = false) @Column(name = "DESCRIPTION") private String description; @Basic(optional = false) @Column(name = "PRICE") private double price; @Basic(optional = false) @Column(name = "NUMBEROFPAGE") private int numberofpage; public Book() { } public Book(Integer id) { this.id = id; } public Book(Integer id, String title, String description, double price, int numberofpage) { this.id = id; this.title = title; this.description = description; this.price = price; this.numberofpage = numberofpage; } public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public String getDescription() { return description; } public void setDescription(String description) { this.description = description; } public double getPrice() { return price; } public void setPrice(double price) { this.price = price; } public int getNumberofpage() { return numberofpage; } public void setNumberofpage(int numberofpage) { this.numberofpage = numberofpage; } @Override public int hashCode() { int hash = 0; hash += (id != null ? id.hashCode() : 0); return hash; } @Override public boolean equals(Object object) { // TODO: Warning - this method won't work in the case the id fields are not set if (!(object instanceof Book)) { return false; } Book other = (Book) object; if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) { return false; } return true; } @Override public String toString() { return "com.entity.Book[id=" + id + "]"; } } My Junit test class: public class BookTest { private static EntityManager em; private static EntityManagerFactory emf; public BookTest() { } @BeforeClass public static void setUpClass() throws Exception { emf = Persistence.createEntityManagerFactory("E01R01PU"); em = emf.createEntityManager(); } @AfterClass public static void tearDownClass() throws Exception { em.close(); emf.close(); } @Test public void createBook() { Book book = new Book(); book.setId(1); book.setDescription("Mastering the Behavior Driven Development with Ruby on Rails"); book.setTitle("Mastering the BDD"); book.setPrice(25.9f); book.setNumberofpage(1029); em.persist(book); assertNotNull("ID should not be null", book.getId()); } } My persistence.xml jta-data-sourceBookstoreJNDI And exception is: May 7, 2009 11:10:37 AM org.hibernate.validator.util.Version INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 May 7, 2009 11:10:37 AM org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. [EL Info]: 2009-05-07 11:10:37.531--ServerSession(13671123)--EclipseLink, version: Eclipse Persistence Services - 2.0.0.v20091127-r5931 May 7, 2009 11:10:40 AM com.sun.enterprise.transaction.JavaEETransactionManagerSimplified initDelegates INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate May 7, 2009 11:10:43 AM com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter SEVERE: rardeployment.class_not_found May 7, 2009 11:10:43 AM com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter SEVERE: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:104) at com.sun.enterprise.connectors.service.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:216) at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:352) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:106) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:569) at javax.naming.InitialContext.lookup(InitialContext.java:396) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:110) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.entity.BookTest.setUpClass(BookTest.java:31) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15) at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41) at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27) at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31) at org.junit.runners.ParentRunner.run(ParentRunner.java:220) at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:515) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1031) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:888) Caused by: java.lang.ClassNotFoundException: com.sun.gjc.spi.ResourceAdapter at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:96) ... 32 more [EL Severe]: 2009-05-07 11:10:43.937--ServerSession(13671123)--Local Exception Stack: Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.ValidationException Exception Description: Cannot acquire data source [BookstoreJNDI]. Internal Exception: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]] at org.eclipse.persistence.exceptions.ValidationException.cannotAcquireDataSource(ValidationException.java:451) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:116) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.entity.BookTest.setUpClass(BookTest.java:31) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15) at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41) at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27) at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31) at org.junit.runners.ParentRunner.run(ParentRunner.java:220) at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:515) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1031) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:888) Caused by: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:569) at javax.naming.InitialContext.lookup(InitialContext.java:396) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:110) ... 23 more Caused by: javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR] at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:109) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) ... 26 more Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:104) at com.sun.enterprise.connectors.service.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:216) at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:352) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:106) ... 29 more Caused by: java.lang.ClassNotFoundException: com.sun.gjc.spi.ResourceAdapter at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:96) ... 32 more Exception Description: Cannot acquire data source [BookstoreJNDI]. Internal Exception: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]])

  Read the article

• Getter and Setter vs. Builder strategy

  - by Extrakun

  I was reading a JavaWorld's article on Getter and Setter where the basic premise is that getters expose internal content of an object, hence tightening coupling, and go on to provide examples using builder objects. I was rather leery of abolishing getter/setter but on second reading of the article, see to quite like the idea. However, sometimes I just need one cruical element of an entity class, such as the user's id and writing one whole class just to extract that cruical element seems like overkill. It also implies that for different view, a different type of importer/exporter must be implemented (or the whole data of the class to be exported out, thus resulting in waste). Usually I tend towards filtering the result of a getter - for example, if I need to output the price of a product in different currency, I would code it as: return CurrencyOutput::convertTo($product->price(), 'USD'); This is with the understanding that the raw output of a getter is not necessary the final result to be pushed onto a screen or a database. Is getter/setter really as bad as it is protrayed to be? When should one adopt a builder strategy, or a 'get the result and filter it' approach? How do you avoid having a class needing to know about every other objects if you are not using getter/setter?

  Read the article

• Use the repository pattern when using PLINQO generated data?

  - by Chad

  I'm "upgrading" an MVC app. Previously, the DAL was a part of the Model, as a series of repositories (based on the entity name) using standard LINQ to SQL queries. Now, it's a separate project and is generated using PLINQO. Since PLINQO generates query extensions based on the properties of the entity, I started using them directly in my controller... and eliminated the repositories all together. It's working fine, this is more a question to draw upon your experience, should I continue down this path or should I rebuild the repositories (using PLINQO as the DAL within the repository files)? One benefit of just using the PLINQO generated data context is that when I need DB access, I just make one reference to the the data context. Under the repository pattern, I had to reference each repository when I needed data access, sometimes needing to reference multiple repositories on a single controller. The big benefit I saw on the repositories, were aptly named query methods (i.e. FindAllProductsByCategoryId(int id), etc...). With the PLINQO code, it's _db.Product.ByCatId(int id) - which isn't too bad either. I like both, but where it gets "harrier" is when the query uses predicates. I can roll that up into the repository query method. But on the PLINQO code, it would be something like _db.Product.Where(x = x.CatId == 1 && x.OrderId == 1); I'm not so sure I like having code like that in my controllers. Whats your take on this?

  Read the article

• WSO2 ESB on Carbon 4.2 - Did not find the desired phase 'Transport' while deploying handler 'POXSecurityHandler'

  - by user3385500

  I'm new to WSO2 ESB and would like to try it out for some external integrations. I've installed the WSO2 Carbon 4.2 server and installed the ESB feature 4.8.1. After a restart, I'm getting some errors as below. Any tips or suggestions would be gratefully accepted. Thanks. [2014-03-06 10:01:08,521] INFO {org.wso2.carbon.mediation.initializer.ServiceBusInitializer} - Initializing Apache Synapse... [2014-03-06 10:01:08,525] FATAL {org.wso2.carbon.mediation.initializer.ServiceBusInitializer} - Couldn't initialize the ESB... org.apache.synapse.SynapseException: The synapse.xml location ././ ./repository/deployment/server/synapse-configs /default doesn't exist at org.apache.synapse.SynapseControllerFactory.handleFatal(SynapseControllerFactory.java:121) at org.apache.synapse.SynapseControllerFactory.validatePath(SynapseControllerFactory.java:113) at org.apache.synapse.SynapseControllerFactory.validate(SynapseControllerFactory.java:88) at org.apache.synapse.SynapseControllerFactory.createSynapseController(SynapseControllerFactory.java:44) at org.apache.synapse.ServerManager.init(ServerManager.java:102) at org.wso2.carbon.mediation.initializer.ServiceBusInitializer.initESB(ServiceBusInitializer.java:423) at org.wso2.carbon.mediation.initializer.ServiceBusInitializer.activate(ServiceBusInitializer.java:182) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) ... ... ... [2014-03-06 10:01:08,531] INFO {org.wso2.carbon.rule.kernel.internal.ds.RuleEngineConfigDS} - Successfully registered the Rule Config service [2014-03-06 10:01:08,553] ERROR {org.wso2.carbon.security.internal.SecurityMgtServiceComponent} - Failed to activate SecurityMgtServiceComponent org.apache.axis2.phaseresolver.PhaseException: Did not find the desired phase 'Transport' while deploying handler 'POXSecurityHandler'. at org.apache.axis2.phaseresolver.PhaseHolder.addHandler(PhaseHolder.java:75) at org.apache.axis2.phaseresolver.PhaseResolver.engageModuleToFlow(PhaseResolver.java:68) at org.apache.axis2.phaseresolver.PhaseResolver.engageModuleToOperation(PhaseResolver.java:104) at org.apache.axis2.phaseresolver.PhaseResolver.engageModuleToOperation(PhaseResolver.java:110) at org.apache.axis2.description.AxisOperation.onEngage(AxisOperation.java:152) at org.apache.axis2.description.AxisDescription.engageModule(AxisDescription.java:478) at org.apache.axis2.description.AxisService.onEngage(AxisService.java:827) at org.apache.axis2.description.AxisDescription.engageModule(AxisDescription.java:478) at org.apache.axis2.description.AxisServiceGroup.onEngage(AxisServiceGroup.java:134)

  Read the article

• NSTableView Drag and Drop not working

  - by macatomy

  Hi, I'm trying to set up very basic drag and drop for my NSTableView. The table view has a single column (with a custom cell). The column is bound to an NSArrayController, and the array controller's content array is bound to an NSArray on my controller object. The data displays fine in the table. I connected the dataSource and delegate outlets of the table view to my controller object, and then implemented these methods: - (BOOL)tableView:(NSTableView *)aTableView writeRowsWithIndexes:(NSIndexSet *)rowIndexes toPasteboard:(NSPasteboard *)pboard { NSLog(@"dragging"); return YES; } - (NSDragOperation)tableView:(NSTableView*)tv validateDrop:(id <NSDraggingInfo>)info proposedRow:(NSInteger)row proposedDropOperation:(NSTableViewDropOperation)op { return NSDragOperationEvery; } - (BOOL)tableView:(NSTableView *)aTableView acceptDrop:(id <NSDraggingInfo>)info row:(NSInteger)row dropOperation:(NSTableViewDropOperation)operation { return YES; } I also registered the drag types in -awakeFromNib: #define MyDragType @"MyDragType" - (void)awakeFromNib { [super awakeFromNib]; [_myTable registerForDraggedTypes:[NSArray arrayWithObjects:MyDragType, nil]]; } The problem is that the -tableView:writeRowsWithIndexes:toPasteboard: method is never called. I've looked at a bunch of examples and I can't figure out anything I'm doing wrong. Could the problem be that I'm using a custom cell? Is there something I'm supposed to override in the cell subclass to enable this functionality? EDIT: Confirmed. Switching the custom cell for a regular NSTextFieldCell made dragging work. Now, how do I make drag and drop work with my custom cell?

  Read the article

• Modelling Business Logic with NON-Techies

  - by cbmeeks

  The setup: Winform/ASP.NET MVC projects. Learning NHibernate SQL-Server driven apps I work with clients that have no idea how to model an application. That's what I'm for. However, we have lots of conflicts with validation, mis-understandings, etc. For example, the client will ask for an order entry screen. The screen should require a "product". That's fine and dandy. However, the client didn't know to tell me that the user can't order a product of "Class A" unless it's Tuesday. Or, they need a time entry screen. 2 days before it's rolled into production, they casually forgot to mention that certain activities are only valid for certain situations. These situations being a week of coding. That's of course, some crude examples (not by much!). But the problem is getting these non-technical clients to layout their business logic. They somehow didn't realize that the "Class A" problem would come up two weeks later, etc. I'm all for agile programming but is there an easy way to somehow make business logic like this extremely easy to implement and change on almost a daily basis? I of course am splitting the project into hopefully intelligent pieces, using NHibernate, etc. But making this BI logic so dynamic is really making it hard to project timelines, etc. Any suggestions? I know there will never be a perfect client (or a perfect provider) but how do you guys deal with the constant mis-understandings? Thanks.

  Read the article

• CakePHP: email validate action doesn't work when clicking on the email link

  - by bakerjr

  Hi, We've created the email validation part of our site. We built the site using CakePHP BTW. The problem is that it doesn't work when we click on the link in the email. The email is sent as plain text. A weird thing is that when we paste the link on the address bar, it works. Also when clicking on the link using Gmail and desktop email clients, it works as well. Other email providers doesn't work. EDIT: Additional info: Example link for the validation: http://localhost/users/validate/validatecodeblah12c023 When it's working it should login the user and redirect to the user dashboard. It goes to the front page when it's not working (see description above). Additional info 2: I did compare the results using Live HTTP headers and I found out that the only time it doesn't push through (goes to the login page for some reason) is when there's a 'Referrer: h ttp://mail.yahooblahblah...' Gmail for some reason doesn't have a 'Referer' line in it's headers.

  Read the article

• Getting parameters values blank and null when using custom wsdl in axis2

  - by Narendra

  Hi All, I am using axis2 for my web services creation. I want to user my own wsdl file instead of using generated wsdl file. When I am placing my own wsdl file in META-INF directory and deploying my web services they are deploying successfully. But the problem is when i try to test these web service using soapui it throwing null pointer exception. For example I am invoking following operations in soap ui. public String testWebService(String a, String b) { LogHelper.info("Value of a is:"+a); LogHelper.info("Value of b is :"+b); String c=a.trim()+b.Trim(); return "suceess" } output in console: value of a is: value of b is:null 19:58:47,781 ERROR [RPCMessageReceiver] Exception occurred while trying to invoke service method testWebService java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.axis2.rpc.receivers.RPCUtil.invokeServiceClass(RPCUtil.java:194) at org.apache.axis2.rpc.receivers.RPCMessageReceiver.invokeBusinessLogic(RPCMessageReceiver.java:102) at org.apache.axis2.receivers.AbstractInOutMessageReceiver.invokeBusinessLogic(AbstractInOutMessageReceiver.java:40) at org.apache.axis2.receivers.AbstractMessageReceiver.receive(AbstractMessageReceiver.java:114) at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:173) at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostRequest(HTTPTransportUtils.java:173) at org.apache.axis2.transport.http.AxisServlet.doPost(AxisServlet.java:142) at javax.servlet.http.HttpServlet.service(HttpServlet.java:637) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92) at o...................................................... SO What i understand is i am getting value for a is black and value of b is null. Can any one give me any suggestions please. Thanks, Narendra

  Read the article

• ClassCastException while using service

  - by Sebi

  I defined a local Service: public class ComService extends Service implements IComService { private IBinder binder = new ComServiceBinder(); public class ComServiceBinder extends Binder implements IComService.IServiceBinder { public IComService getService() { return ComService.this; } } public void test(String msg) { System.out.println(msg); } @Override public IBinder onBind(Intent intent) { return binder; } } The corresponding interface: public interface IComService { public void test(String msg); public interface IServiceBinder { IComService getService(); } } Then i try to bind the service in another activity in another application, where the same interface is available: bindService(new Intent("ch.ifi.csg.games4blue.gamebase.api.ComService"), conn, Context.BIND_AUTO_CREATE); and private ServiceConnection conn = new ServiceConnection() { @Override public void onServiceConnected(ComponentName name, IBinder service) { Log.i("INFO", "Service bound " + name); comService = ((IComService.IServiceBinder)service).getService(); serviceHandler.sendEmptyMessage(0); } @Override public void onServiceDisconnected(ComponentName arg0) { Log.i("INFO", "Service Unbound "); } }; but the line comService = ((IComService.IServiceBinder)service).getService(); always throws a 05-02 22:12:55.922: ERROR/AndroidRuntime(622): java.lang.ClassCastException: android.os.BinderProxy I can't explain why, I followed the app sample on http://developer.android.com/resources/samples/ApiDemos/src/com/example/android/apis/app/LocalServiceBinding.html Any hints would be nice!

  Read the article

• ASP.NET MVC 2: How to write this Linq SQL as a Dynamic Query (using strings)?

  - by Dr. Zim

  Skip to the "specific question" as needed. Some background: The scenario: I have a set of products with a "drill down" filter (Query Object) populated with DDLs. Each progressive DDL selection will further limit the product list as well as what options are left for the DDLs. For example, selecting a hammer out of tools limits the Product Sizes to only show hammer sizes. Current setup: I created a query object, sent it to a repository, and fed each option to a SQL "table valued function" where null values represent "get all products". I consider this a good effort, but far from DDD acceptable. I want to avoid any "programming" in SQL, hopefully doing everything with a repository. Comments on this topic would be appreciated. Specific question: How would I rewrite this query as a Dynamic Query? A link to something like 101 Linq Examples would be fantastic, but with a Dynamic Query scope. I really want to pass to this method the field in quotes "" for which I want a list of options and how many products have that option. (from p in db.Products group p by p.ProductSize into g select new Category { PropertyType = g.Key, Count = g.Count() }).Distinct(); Each DDL option will have "The selection (21)" where the (21) is the quantity of products that have that attribute. Upon selecting an option, all other remaining DDLs will update with the remaining options and counts.

  Read the article

• Inconsistency in modified/created/accessed time on mac

  - by Seth Johnson

  I'm having trouble using os.utime to correctly set the modification time on the mac (Mac OS X 10.6.2, running Python 2.6.1 from /usr/bin/python). It's not consistent with the touch utility, and it's not consistent with the properties displayed in the Finder's "get info" window. Consider the following command sequence. The 'created' and 'modified' times in the plain text refer to the "get info" window attributes. As a reminder, os.utime takes arguments (filename, (atime, mtime)). >>> import os >>> open('tempfile','w').close() 'created' and 'modified' are both the current time. >>> os.utime('tempfile', (1000000000, 1500000000) ) 'created' is the current time, 'modified' is July 13, 2017. >>> os.utime('tempfile', (1000000000, 1000000000) ) 'created' and 'modified' are both September 8, 2001. >>> os.path.getmtime('tempfile') 1000000000.0 >>> os.path.getctime('tempfile') 1269021939.0 >>> os.path.getatime('tempfile') 1269021951.0 ...but the os.path.get?time and os.stat don't reflect it. >>> os.utime('tempfile', (1500000000, 1000000000) ) 'created' and 'modified' are still both September 8, 2001. >>> os.utime('tempfile', (1500000000, 1500000000) ) 'created' is September 8, 2001, 'modified' is July 13, 2017. I'm not sure if this is a Python problem or a Mac stat problem. When I exit the Python shell and run touch -a -t 200011221234 tempfile neither the modification nor the creation times are changed, as expected. Then I run touch -m -t 200011221234 tempfile and both 'created' and 'modified' times are changed. Does anyone have any idea what's going on? How do I change the modification and creation times consistently on the mac? (Yes, I am aware that on Unixy systems there is no "creation time.")

  Read the article

• XML: Check if anything exists between two nodes

  - by sebastian

  Hi there, I need to find out if anything exists between two nodes. My XML looks like this: <event value1="1" value2="2" value3="3" <info="some info here"/> Line 1.</lb> Line 2.</lb></lb> Line 3.</lb> Line 4.</lb> </event> My goal is to convert the </lb> nodes to </br> HTML tags using XSLT. There is one additional requirement to fulfill though. In case there is one </lb> directly following another </lb> I want to output only one </br>. My XSLT looks like this: <xsl:template match="lb"> <xsl:if test="not(preceding-sibling::lb[1])"> <br/> </xsl:if> </xsl:template> The problem with the XSLT above is that it works correctly for line 1 only as the text between both nodes is ignored. Maybe someone here can help.

  Read the article

• Shutdown and WakeUp Script C#

  - by Stephen Murby

  Hiya I am very new to C#, infact this is basically my first task set by work whilst i learn the language. Yes i am also new to programming, be gentle :). Context: My script needs to query active directory, grab of OU's and put them to a combo box in a form. Next query ActDir for a list of machines in a selected OU (Done this in a vbscript already) Next query the machines in turn for there IP, and MAC addresses.(Done this in a vbscript already) Next needs to shut those machines down(Done this in a vbscript already) and dump all the machine and NIC info to a txt file The other half of the script grabs the info for the machines out of the text file and sends them a magic packet to wake them up. The shutdown section i have already written a VBscript for, but decided it wasn't future prrof, and i was learninc C# at home, so figured it was the best option to start over with. Im not looking for anyone to write this for me, but if anyone had any pointers on where to go for information etc. . . It would be more than appreciated :)

  Read the article

• sIFR - getting a:hover to work in navigation list

  - by HudRom

  Hi, I am currently struggling with sIFR and a:hover. My problem site is hosted at http://irene.huditsch.info I have the following HTML code: <body id="irene-huditsch-info"> <div id="header"> <h1>Irene Huditsch</h1> <div id="top-nav"> <ul> <li id="impressum"> <a href="impressum.html" rel="index">Impressum</a> </li> <li id="kontakt"> <a href="kontakt.html">Kontakt</a> </li> </ul> </div> ... My sIFR-config.js looks like: sIFR.replace(braganza, { selector: 'div#top-nav a', css: '.sIFR-root { background-color: transparent; color: #FFFFFF; line-height: 13px; font-size: 11px; text-decoration: underline; cursor: pointer; } .sIFR-root:hover { color: #592b02; }', wmode: 'transparent' }); But the hover doesn't take effect. I tried different solution with no success either. When I write sIFR.replace(braganza, { selector: 'div#top-nav li', css: 'a { background-color: transparent; color: #FFFFFF; line-height: 13px; font-size: 11px; text-decoration: underline; cursor: pointer; } a:hover { color: #592b02; }', wmode: 'transparent' }); (which seems logical to me), the list items are not rendered at all. Could you please give me an advice how to do it correctly with the structure given? Thanks, Roman

  Read the article

• Problem with IE and Jquery qTip plugin

  - by user272899

  I am having problems with the Jquery qtip plugin. It works fine in Firefox (see here http://movieo.no-ip.org/ hover over the first image). But doesn't work in IE. This is the code: $('.moviebox').each(function() { $(this).qtip({ content: $(this).children('.info'), show: 'mouseover', hide: 'mouseout', style: { name: 'light' }, position: { corner: { target: 'rightbottom', tooltip: 'bottomleft' } } }); }); And the html <!--start moviebox--> <div class="moviebox"> <a href="#"> <img src="http://1.bp.blogspot.com/_mySxtRcQIag/S6deHcoChaI/AAAAAAAAObc/Z1Xg3aB_wkU/s200/rising_sun.jpg" /> </a> <!--start infobox--> <div class="info"> <span>Rising Sun (2006)</span> <div class="description"><strong>Description:</strong><br /> test test test test test test test test test test test test test test test test</div> <img src="http://1.bp.blogspot.com/_mySxtRcQIag/S6deHcoChaI/AAAAAAAAObc/Z1Xg3aB_wkU/s200/rising_sun.jpg" /> <div class="cast"><strong>Cast:</strong><br /> Sean connery</div> <div class="rating"><strong>Rating:</strong><br />5stars</div> </div> <!--end infobox--> </div> <!--end moviebox--> Why wouldn't that work in IE????? Beats me. Checkout movieo.no-ip.org for the whole source

  Read the article

• unable to place breakpoints in eclipse

  - by anjanb

  I am using eclipse europa (3.5) on windows vista home premium 64-bit using JDK 1.6.0_18 (32 BIT). Normally, I am able to put breakpoints just fine; However, for a particular class which is NOT part of the project (this class is inside a .JAR file (.JAR file is part of the project) ), although I have attached a source directory to this .JAR file, I am unable to place a breakpoint in this class. If I double-click on the breakpoint pane(left border), I notice that a class breakpoint is placed. I was wondering if there was NO debug info; However, found that this particular class was compiled using ant/javac task using debug="true" and debuglevel="lines,vars,source". I even ran jad on this class to confirm that it indeed contained the debug info. So, why is eclipse preventing me from placing a breakpoint ? EDIT : Just so everyone understands the context, this is a webapp running under tomcat 6.0. I am remote debugging the application from eclipse after having started tomcat outside. The application is working just fine. I am trying to understand the behavior of the above class which I'm unable to do since eclipse is not letting me set a BP. P.S : I saw a few threads here talking about BPs not being hit but in my case, I am unable to place the BP! P.P.S : I tried JDK 1.6.0_16 before trying out 1.6.0_18. Thanks for any pointers.

  Read the article

• Passing an TAdoDataset as parameter using TADOStoredProc

  - by Salvador

  i have an oracle stored procedure with 2 parameters declarated as input cursors. how i can assign this parameters the TADOStoredProc component? ORACLE PROCEDURE MYSTOREDPROCEDURE(P_HEADER IN TCursor, P_DETAL IN TCursor, P_RESULT OUT VARCHAR2) BEGIN //My code goes here END; Delphi function TMyClass.Add(Header, Detail: TADODataSet;var _Result: string): boolean; Var StoredProc : TADOStoredProc; begin Result:=False; StoredProc:=TADOStoredProc.Create(nil); try StoredProc.Connection :=ADOConnection1; StoredProc.ProcedureName:='MYSTOREDPROCEDURE'; StoredProc.Parameters.Refresh; StoredProc.Parameters.ParamByName('P_HEADER').Value :=Header;//How can assign this parameter? try StoredProc.Open; _Result:=VarToStrNull(StoredProc.Parameters.ParamByName('P_RESULT').Value); StoredProc.Close; Result:=True; except on E : Exception do begin _Result:=E.Message; //exit; end; end; finally StoredProc.Free; end; end;

  Read the article

• How do I show information to users belonging to different groups (web) in modx

  - by Gaurav Sharma

  Hello Everyone, I have created a website using modx evolution v1.0.2. The website that I have developed has 12 different types of users (categorized in groups). Each user will be shown a different price depending on the group to which he belongs. Till now I have been able to fetch the group name of current logged in user (created a snippet for that), but how can I achieve the above mentioned functionality so that each user should be able to see only the price that I have coded according to his group. For example: If a user is associated with the 'ocassional' group then he should be shown the price as , say, 50 bucks and if a user is associated with the 'regular' group then he should be shown the price as, say, 40 bucks I can easily do this by coding a single snippet for every product's variant, but there are a lot of variants (more than 100 and growing). I have created a resource(page) for every product and it's variant. Every variant has a price. It is this price that I want to be shown according to the logged in user group membership. I hope I am able to explain my query clearly. Please help me do this functionality. Thanks

  Read the article

• Am I correctly extracting JPEG binary data from this mysqldump?

  - by Glenn

  I have a very old .sql backup of a vbulletin site that I ran around 8 years ago. I am trying to see the file attachments that are stored in the DB. The script below extracts them all and is verified to be JPEG by hex dumping and checking the SOI (start of image) and EOI (end of image) bytes (FFD8 and FFD9, respectively) according to the JPEG wiki page. But when I try to open them with evince, I get this message "Error interpreting JPEG image file (JPEG datastream contains no image)" What could be going on here? Some background info: sqldump is around 8 years old vbulletin 2.x was the software that stored the info most likely php 4 was used most likely mysql 4.0, possibly even 3.x the column datatype these attachments are stored in is mediumtext My Python 3.1 script: #!/usr/bin/env python3.1 import re trim_l = re.compile(b"""^INSERT INTO attachment VALUES\('\d+', '\d+', '\d+', '(.+)""") trim_r = re.compile(b"""(.+)', '\d+', '\d+'\);$""") extractor = re.compile(b"""^(.*(?:\.jpe?g|\.gif|\.bmp))', '(.+)$""") with open('attachments.sql', 'rb') as fh: for line in fh: data = trim_l.findall(line)[0] data = trim_r.findall(data)[0] data = extractor.findall(data) if data: name, data = data[0] try: filename = 'files/%s' % str(name, 'UTF-8') ah = open(filename, 'wb') ah.write(data) except UnicodeDecodeError: continue finally: ah.close() fh.close() update The JPEG wiki page says FF bytes are section markers, with the next byte indicating the section type. I see some that are not listed in the wiki page (specifically, I see a lot of 5C bytes, so FF5C). But the list is of "common markers" so I'm trying to find a more complete list. Any guidance here would also be appreciated.

  Read the article

< Previous Page | 762 763 764 765 766 767 768 769 770 771 772 773  | Next Page >