Search Results

Search found 7131 results on 286 pages for 'auto dimmer'.

Page 77/286 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Using Read-Only Fields in a C# WebBrowser

    - by TheDramaLlama
    I'm currently using a WebBrowser control in a C# WinForms application, and attempting to control some variability presented with this control. Basically, my users log in to a separate UI provided by my application, which then displays the WebBrowser control, navigates to a predetermined log-in URL, and then auto-fills the username and password fields on that page. However, in order to prevent unpredictable behavior in this WebBrowser control, I want to make these username and password text boxes read-only after they are auto-populated. Essentially, I want the user to see a browser page that has been filled out for them, and that cannot be edited. (This is so that any authentication errors can be handled by my application as opposed to the browser.) The code I'm currently using to populate the text fields and make them read only is as follows: webBrowser1.Document.GetElementById("username").InnerText = username; webBrowser1.Document.GetElementById("password").InnerText = password; webBrowser1.Document.GetElementById("username").Enabled = false; webBrowser1.Document.GetElementById("password").Enabled = false; Unfortunately, when I try to make the fields read-only, the authentication server acts like the password field was not filled out, and prompts the user to fill it out again after the "Submit" button is clicked. Is this expected behavior, and if so, what other methods can I try to prevent users from changing the credentials that the browser was auto-populated with?

    Read the article

  • How do I constrain a container's height to the height of a specific content element?

    - by Robert Rossney
    I'm trying to do something which seems like it should be extremely simple and yet I can't see how. I have a very simple layout, a TextBox with an image next to it, similar to the way it might look adorned with an ErrorProvider in a WinForms application. The problem is, I want the image to be no higher than the TextBox it's next to. If I lay it out like this, say: <Grid> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="Auto"/> </Grid.ColumnDefinitions> <TextBox Grid.Row="0" Grid.Column="0" MinWidth="100"/> <Image Grid.Row="0" Grid.Column="1" Source="error.png" /> </Grid> the row will size to the height of the image if the image is taller than the TextBox. This also happens if I use a DockPanel or StackPanel. The naive solution would be to bind the Height to the TextBox's ActualHeight. I'm sure this is wrong. But what's right?

    Read the article

  • Implementing deadlock condition

    - by Bhaskar
    I am trying to implementing deadlock condition but somehow I am not able to get it working. Both the threads Thread1 and Thread2 are entering in the run function but only one of them enters in Sub/Sum depending on who entered run first. Example : if Thread2 entered run first the it will call sub() and Thread1 never calls sum(). I have also added sleep time so that Thread2 sleeps before calling sum() and Thread1 gets enough time to enter Sum() but Thread1 never enters. public class ExploringThreads { public static void main(String[] args) { // TODO Auto-generated method stub threadexample a1 = new threadexample(); Thread t1 = new Thread(a1, "Thread1"); Thread t2 = new Thread(a1,"Thread2"); t1.start(); t2.start(); } } class threadexample implements Runnable{ public int a = 10; public void run(){ if(Thread.currentThread().getName().equals("Thread1")) sum(); else if(Thread.currentThread().getName().equals("Thread2")) sub(); } public synchronized void sum() { try { Thread.sleep(2000); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } System.out.println(Thread.currentThread().getName()+"In Sum"); sub(); } public synchronized void sub() { try { Thread.sleep(2000); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } System.out.println(Thread.currentThread().getName()+"In Sub"); sum(); } }

    Read the article

  • Why is android:transcriptMode="normal" not working properly?

    - by BCS
    I've been doing a lot of fiddling with an issue I've been having. What happens is each time an item gets added to my listview (adapter) I expect it to auto-scroll if I'm at the last item (which it will do to an extent); HOWEVER, if 3 or more items get added at once, it will not auto-scroll. Here is the XML of that listview: <ListView android:id="@android:id/list" android:layout_width="fill_parent" android:layout_height="0dip" android:layout_weight="1" android:transcriptMode="normal"/> I tried a workaround using a snippet I found here. My code is as follows: public void addChat(final String text, final String username) { this.runOnUiThread(new Runnable() { public void run() { globals.chatAdapter.add(DateFormat.format("hh:mmaa", Calendar.getInstance()).toString(), username, text); globals.chatAdapter.notifyDataSetChanged(); int lastP = getListView().getLastVisiblePosition(); int count = globals.chatAdapter.getCount() - 1; if (lastP == globals.chatAdapter.oldP || lastP == -1) { getListView().setSelection(count); } globals.chatAdapter.oldP = count; } }); } The problem with this is when a bunch of items come in at once, getListView().getLastVisiblePosition() will not update right away causing a setSelection() to never get called, and thus no auto-scroll. Any suggestions?

    Read the article

  • How to reduce the time of clang_complete search through boost

    - by kirill_igum
    I like using clang with vim. The one problem that I always have is that whenever I include boost, clang goes through boost library every time I put "." after a an object name. It takes 5-10 seconds. Since I don't make changes to boost headers, is there a way to cache the search through boost? If not, is there a way to remove boost from the auto-completion search? update (1) in response to answer by adaszko after :let g:clang_use_library = 1 I type a name of a variable. I press ^N. Vim starts to search through boost tree. it auto-completes the variable. i press "." and get the following errors: Error detected while processing function ClangComplete: line 35: Traceback (most recent call last): Press ENTER or type command to continue Error detected while processing function ClangComplete: line 35: File "<string>", line 1, in <module> Press ENTER or type command to continue Error detected while processing function ClangComplete: line 35: NameError: name 'vim' is not defined Press ENTER or type command to continue Error detected while processing function ClangComplete: line 40: E121: Undefined variable: l:res Press ENTER or type command to continue Error detected while processing function ClangComplete: line 40: E15: Invalid expression: l:res Press ENTER or type command to continue Error detected while processing function ClangComplete: line 58: E121: Undefined variable: l:res Press ENTER or type command to continue Error detected while processing function ClangComplete: line 58: E15: Invalid expression: l:res Press ENTER or type command to continue ... and there is no auto-compeltion update (2) not sure if clang_complete should take care of the issue with boost. vim without plugins does search through boost. superuser has an answer to comment out search through boost dirs with set include=^\\s*#\\s*include\ \\(<boost/\\)\\@!

    Read the article

  • C++11 decltype requires instantiated object

    - by snipes83
    I was experimenting a little with the C++11 standard and came up with this problem: In C++11 you can use auto and decltype to automatically get return type for a function as, for example the begin() and end() functions below: #include <vector> template <typename T> class Container { private: std::vector<T> v; public: auto begin() -> decltype(v.begin()) { return v.begin(); }; auto end() -> decltype(v.end()) { return v.end(); }; }; My problem here is that I have to declare the private vector<T> v before the public declarations which is against my coding style. I would like to declare all my private members after my public members. You have to declare the vector before the function declaration because the expression in decltype is a call to vector member function begin() and requires an instance of the object. Is there a way around this?

    Read the article

  • 100% height for multiple divs

    - by kilrizzy
    I usually have my structure laid out something like this: <div id="all"> <div id="page"> <div id="header"></div> <div id="content"></div> <div id="footer"></div> </div> </div> Where the body will hold a background pattern, "all" will hold a dropshadow for the page going up and down, and "page" may often have a repeating-y background as well. I have tried variations on using the css height/min-height properties: html, body { height:100%; ... } #all { height:100%; min-height:100%; } #page { height:100%; min-height:100%; height:auto !important; } It seems like if I remove height:auto from "all" then it seems like it works UNTIL you scroll, then after the scroll the background for all dissappears example However if I keep the height:auto there then I get the problem of the background for page not working example Hopefully someone knows a fix?

    Read the article

  • Android Expandable List View Update

    - by Gaurav Arora
    I am implementing a chatting application, where I have made a service to listen all the presence changed. On the change of the presence I want to update the data and I am unable to update the data that is showing in the expandable list view. Please suggest me a means to do the same. public class UserMenuActivity extends ExpandableListActivity { private XMPPConnection connection; String name,availability,subscriptionStatus; TextView tv_Status; /** Variable Define here */ private String[] data = { "View my profile", "New Multiperson Chat", "New Broad Cast Message", "New Contact Category", "New Group", "Invite to CCM", "Search", "Expand All", "Settings", "Help", "Close" }; private String[] data_Contact = { "Rename Category","Move Contact to Category", "View my profile", "New Multiperson Chat", "New Broad Cast Message", "New Contact Category", "New Group", "Invite to CCM", "Search", "Expand All", "Settings", "Help", "Close" }; private String[] data_child_contact = { "Open chat", "Delete Contact","View my profile", "New Multiperson Chat", "New Broad Cast Message", "New Contact Category", "New Group", "Invite to CCM", "Search", "Expand All", "Settings", "Help", "Close" }; private String[] menuItem = { "Chats", "Contacts", "CGM Groups", "Pending","Request" }; private List<String> menuItemList = Arrays.asList(menuItem); private int commonGroupPosition = 0; private String etAlertVal; private DatabaseHelper dbHelper; private int categoryID, listPos; /** New Code here.. */ private ArrayList<String> groupNames; private ArrayList<ArrayList<ChildItems>> childs; private UserMenuAdapter adapter; private Object object; private String[] data2 = { "PIN Michelle", "IP Call" }; private ListView mlist2; private ImageButton mimBtnMenu; private LinearLayout mllpopmenu; private View popupView; private PopupWindow popupWindow; private AlertDialog.Builder alert; private EditText input; private TextView mtvUserName, mtvUserTagLine; private ExpandableListView mExpandableListView; public static List<CategoryDataClass> categoryList; private boolean menuType = false; private String childValContact=""; public static Context context; @Override public void onBackPressed() { if (mllpopmenu.getVisibility() == View.VISIBLE) { mllpopmenu.setVisibility(View.INVISIBLE); } else { if (CCMStaticVariable.CommonConnection.isConnected()) { CCMStaticVariable.CommonConnection.disconnect(); } super.onBackPressed(); } } @SuppressWarnings("unchecked") @Override public boolean onKeyDown(int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_MENU) { if (mllpopmenu.getVisibility() == View.VISIBLE) { mllpopmenu.setVisibility(View.INVISIBLE); } else { if (commonGroupPosition >= 4 && menuType == true) { if(childValContact == ""){ mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter(UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data_Contact)); }else{ mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter(UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data_child_contact)); } } else if (commonGroupPosition == 0) { mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter(UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data)); } } return true; } return super.onKeyDown(keyCode, event); } @Override public void onCreate(Bundle icicle) { super.onCreate(icicle); setContentView(R.layout.usermenulayout); dbHelper = new DatabaseHelper(UserMenuActivity.this); //this.context = context.getApplicationContext(); XMPPConn.getContactList(); connection = CCMStaticVariable.CommonConnection; Presence userPresence = new Presence(Presence.Type.available); userPresence.setPriority(24); userPresence.setMode(Presence.Mode.away); connection.sendPacket(userPresence); } @Override protected void onResume() { super.onResume(); Presence userPresence = new Presence(Presence.Type.available); userPresence.setPriority(24); userPresence.setMode(Presence.Mode.away); connection.sendPacket(userPresence); XMPPConn.getContactList(); setExpandableListView(); } public boolean onChildClick(ExpandableListView parent, View v, int groupPosition, int childPosition, long id) { if (groupPosition == 1 && childPosition == 0) { startActivity(new Intent(UserMenuActivity.this, InvitetoCCMActivity.class)); } else if (groupPosition == 1 && childPosition != 0) { Intent intent = new Intent(UserMenuActivity.this, UserChatActivity.class); intent.putExtra("userNameVal", XMPPConn.mfriendList.get(childPosition - 1).friendName); startActivity(intent); } else if (groupPosition == 2 && childPosition == 0) { startActivity(new Intent(UserMenuActivity.this, CreateGroupActivity.class)); } else if (groupPosition == 2 && childPosition != 0) { String GROUP_NAME = childs.get(groupPosition).get(childPosition) .getName().toString(); int end = GROUP_NAME.indexOf("("); CCMStaticVariable.groupName = GROUP_NAME.substring(0, end).trim(); startActivity(new Intent(UserMenuActivity.this, GroupsActivity.class)); } else if (groupPosition >= 4) { childValContact = childs.get(groupPosition).get(childPosition).getName().trim(); showToast("user==>"+childValContact, 0); } return false; } private void setExpandableListView() { /***###############GROUP ARRAY ############################*/ final ArrayList<String> groupNames = new ArrayList<String>(); groupNames.add("Chats (2)"); groupNames.add("Contacts (" + XMPPConn.mfriendList.size() + ")"); groupNames.add("CGM Groups (" + XMPPConn.mGroupList.size() + ")"); groupNames.add("Pending (1)"); XMPPConn.getGroup(); categoryList = dbHelper.getAllCategory(); /**Group From Sever*/ if (XMPPConn.mGroupList.size() > 0) { for (int g = 0; g < XMPPConn.mGroupList.size(); g++) { XMPPConn.getGroupContact(XMPPConn.mGroupList.get(g).groupName); groupNames.add(XMPPConn.mGroupList.get(g).groupName + "(" + XMPPConn.mGroupContactList.size()+ ")"); } } if(categoryList.size() > 0){ for (int cat = 0; cat < categoryList.size(); cat++) { groupNames.add(categoryList.get(cat).getCategoryName()+ "(0)"); } } this.groupNames = groupNames; /*** ###########CHILD ARRAY * #################*/ ArrayList<ArrayList<ChildItems>> childs = new ArrayList<ArrayList<ChildItems>>(); ArrayList<ChildItems> child = new ArrayList<ChildItems>(); child.add(new ChildItems("Alisha", "Hi",0)); child.add(new ChildItems("Michelle", "Good Morning",0)); childs.add(child); child = new ArrayList<ChildItems>(); child.add(new ChildItems("", "",0)); if (XMPPConn.mfriendList.size() > 0) { for (int n = 0; n < XMPPConn.mfriendList.size(); n++) { child.add(new ChildItems(XMPPConn.mfriendList.get(n).friendNickName, XMPPConn.mfriendList.get(n).friendStatus, XMPPConn.mfriendList.get(n).friendState)); } } childs.add(child); /************** CGM Group Child here *********************/ child = new ArrayList<ChildItems>(); child.add(new ChildItems("", "",0)); if (XMPPConn.mGroupList.size() > 0) { for (int grop = 0; grop < XMPPConn.mGroupList.size(); grop++) { child.add(new ChildItems( XMPPConn.mGroupList.get(grop).groupName + " (" + XMPPConn.mGroupList.get(grop).groupUserCount + ")", "",0)); } } childs.add(child); child = new ArrayList<ChildItems>(); child.add(new ChildItems("Shuchi", "Pending (Waiting for Authorization)",0)); childs.add(child); /************************ Group Contact List *************************/ if (XMPPConn.mGroupList.size() > 0) { for (int g = 0; g < XMPPConn.mGroupList.size(); g++) { /** Contact List */ XMPPConn.getGroupContact(XMPPConn.mGroupList.get(g).groupName); child = new ArrayList<ChildItems>(); for (int con = 0; con < XMPPConn.mGroupContactList.size(); con++) { child.add(new ChildItems( XMPPConn.mGroupContactList.get(con).friendName, XMPPConn.mGroupContactList.get(con).friendStatus,0)); } childs.add(child); } } if(categoryList.size() > 0){ for (int cat = 0; cat < categoryList.size(); cat++) { child = new ArrayList<ChildItems>(); child.add(new ChildItems("-none-", "",0)); childs.add(child); } } this.childs = childs; /** Set Adapter here */ adapter = new UserMenuAdapter(this, groupNames, childs); setListAdapter(adapter); object = this; mlist2 = (ListView) findViewById(R.id.list2); mimBtnMenu = (ImageButton) findViewById(R.id.imBtnMenu); mllpopmenu = (LinearLayout) findViewById(R.id.llpopmenu); mtvUserName = (TextView) findViewById(R.id.tvUserName); mtvUserTagLine = (TextView) findViewById(R.id.tvUserTagLine); //Set User name.. System.out.println("CCMStaticVariable.loginUserName===" + CCMStaticVariable.loginUserName); if (!CCMStaticVariable.loginUserName.equalsIgnoreCase("")) { mtvUserName.setText("" + CCMStaticVariable.loginUserName); } /** Expandable List set here.. */ mExpandableListView = (ExpandableListView) this .findViewById(android.R.id.list); mExpandableListView.setOnGroupClickListener(new OnGroupClickListener() { @Override public boolean onGroupClick(ExpandableListView parent, View v, int groupPosition, long id) { XMPPConn.getContactList(); if (parent.isGroupExpanded(groupPosition)) { commonGroupPosition = 0; }else{ commonGroupPosition = groupPosition; } String GROUP_NAME = groupNames.get(groupPosition); int end = groupNames.get(groupPosition).indexOf("("); String GROUP_NAME_VALUE = GROUP_NAME.substring(0, end).trim(); if (menuItemList.contains(GROUP_NAME_VALUE)) { menuType = false; CCMStaticVariable.groupCatName = GROUP_NAME_VALUE; } else { menuType = true; CCMStaticVariable.groupCatName = GROUP_NAME_VALUE; } long findCatId = dbHelper.getCategoryID(GROUP_NAME_VALUE); if (findCatId != 0) { categoryID = (int) findCatId; } childValContact=""; showToast("Clicked on==" + GROUP_NAME_VALUE, 0); return false; } }); /** Click on item */ mlist2.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> arg0, View arg1, int pos,long arg3) { if (commonGroupPosition >= 4) { if(childValContact == ""){ if (pos == 0) { showAlertEdit(CCMStaticVariable.groupCatName); } /** Move contact to catgory */ if (pos == 1) { startActivity(new Intent(UserMenuActivity.this,AddContactCategoryActivity.class)); } }else{ if(pos == 0){ Intent intent = new Intent(UserMenuActivity.this,UserChatActivity.class); intent.putExtra("userNameVal",childValContact); startActivity(intent); } if(pos == 1){ XMPPConn.removeEntry(childValContact); showToast("Contact deleted sucessfully", 0); Intent intent = new Intent(UserMenuActivity.this,UserMenuActivity.class); } } } else { /** MyProfile */ if (pos == 0) { startActivity(new Intent(UserMenuActivity.this, MyProfileActivity.class)); } /** New multiperson chat start */ if (pos == 1) { startActivity(new Intent(UserMenuActivity.this, NewMultipersonChatActivity.class)); } /** New Broadcast message */ if (pos == 2) { startActivity(new Intent(UserMenuActivity.this, NewBroadcastMessageActivity.class)); } /** Click on add category */ if (pos == 3) { showAlertAdd(); } if (pos == 4) { startActivity(new Intent(UserMenuActivity.this, CreateGroupActivity.class)); } if (pos == 5) { startActivity(new Intent(UserMenuActivity.this, InvitetoCCMActivity.class)); } if (pos == 6) { startActivity(new Intent(UserMenuActivity.this, SearchActivity.class)); } if (pos == 7) { onGroupExpand(2); for (int i = 0; i < groupNames.size(); i++) { mExpandableListView.expandGroup(i); } } /** Click on settings */ if (pos == 8) { startActivity(new Intent(UserMenuActivity.this, SettingsActivity.class)); } if (pos == 10) { System.exit(0); } if (pos == 14) { if (mllpopmenu.getVisibility() == View.VISIBLE) { mllpopmenu.setVisibility(View.INVISIBLE); if (popupWindow.isShowing()) { popupWindow.dismiss(); } } else { mllpopmenu.setVisibility(View.VISIBLE); mlist2.setAdapter(new ArrayAdapter( UserMenuActivity.this, R.layout.listviewtext, R.id.tvMenuText, data)); } } } } }); } /** Toast message display here.. */ private void showToast(String msg, int time) { Toast.makeText(this, msg, time).show(); } public String showSubscriptionStatus(String friend){ return friend; } } Service.class public class UpdaterService extends Service { private XMPPConnection connection; String Friend; String user = ""; @Override public IBinder onBind(Intent arg0) { // TODO Auto-generated method stub return null; } @Override public void onCreate() { // Toast.makeText(this, "My Service Created", Toast.LENGTH_LONG).show(); super.onCreate(); } @Override public void onDestroy() { // TODO Auto-generated method stub super.onDestroy(); } @Override public void onStart(Intent intent, int startId) { // TODO Auto-generated method stub showToast("My Service Started", 0); connection = getConnection(); if (connection.isConnected()) { final Roster roster = connection.getRoster(); RosterListener r1 = new RosterListener() { @Override public void presenceChanged(Presence presence) { // TODO Auto-generated method stub XMPPConn.getContactList(); } @Override public void entriesUpdated(Collection<String> arg0) { // TODO Auto-generated method stub //notification("entriesUpdated"); } @Override public void entriesDeleted(Collection<String> arg0) { // TODO Auto-generated method stub //notification("entriesDeleted"); } @Override public void entriesAdded(Collection<String> arg0) { // TODO Auto-generated method stub Iterator<String> it = arg0.iterator(); if (it.hasNext()) { user = it.next(); } RosterEntry entry = roster.getEntry(user); if(entry.getType().toString().equalsIgnoreCase("to")){ int index_of_Alpha = Friend.indexOf("@"); String subID = Friend.substring(0, index_of_Alpha); notification("Hi "+subID+" wants to add you"); } } }; if (roster != null) { roster.setSubscriptionMode(Roster.SubscriptionMode.manual); System.out.println("subscription going on"); roster.addRosterListener(r1); } } else { showToast("Connection lost-", 0); } } protected void showToast(String msg, int time) { Toast.makeText(this, msg, time).show(); } private XMPPConnection getConnection() { return CCMStaticVariable.CommonConnection; } /** Notification manager */ private void notification(CharSequence message) { String ns = Context.NOTIFICATION_SERVICE; NotificationManager mNotificationManager = (NotificationManager) getSystemService(ns); int icon = R.drawable.ic_launcher; CharSequence tickerText = message; long when = System.currentTimeMillis(); Notification notification = new Notification(icon, tickerText, when); Context context = getApplicationContext(); CharSequence contentTitle = "CCM"; CharSequence contentText = message; Intent notificationIntent = new Intent(this, ManageNotification.class); notificationIntent.putExtra("Subscriber_ID",user ); PendingIntent contentIntent = PendingIntent.getActivity(this, 0, notificationIntent, 0); notification.setLatestEventInfo(context, contentTitle, contentText, contentIntent); notification.flags |= Notification.FLAG_AUTO_CANCEL; final int HELLO_ID = 1; mNotificationManager.notify(HELLO_ID, notification); } } Here is my adapter class public class UserMenuAdapter extends BaseExpandableListAdapter { private ArrayList<String> groups; private ArrayList<ArrayList<ChildItems>> childs; private Context context; public LayoutInflater inflater; ImageView img_availabiliy; private static final int[] EMPTY_STATE_SET = {}; private static final int[] GROUP_EXPANDED_STATE_SET = {android.R.attr.state_expanded}; private static final int[][] GROUP_STATE_SETS = { EMPTY_STATE_SET, // 0 GROUP_EXPANDED_STATE_SET // 1 }; public UserMenuAdapter(Context context, ArrayList<String> groups, ArrayList<ArrayList<ChildItems>> childs) { this.context = context; this.groups = groups; this.childs = childs; inflater = LayoutInflater.from(context); } @Override public Object getChild(int groupPosition, int childPosition) { return childs.get(groupPosition).get(childPosition); } @Override public long getChildId(int groupPosition, int childPosition) { return (long) (groupPosition * 1024 + childPosition); } @Override public View getChildView(int groupPosition, int childPosition, boolean isLastChild, View convertView, ViewGroup parent) { View v = null; if (convertView != null) v = convertView; else v = inflater.inflate(R.layout.child_layout, parent, false); ChildItems ci = (ChildItems) getChild(groupPosition, childPosition); TextView tv = (TextView) v.findViewById(R.id.tvChild); tv.setText(ci.getName()); TextView tv2 = (TextView) v.findViewById(R.id.tvChild2); tv2.setText(ci.getDailyStatus()); img_availabiliy = (ImageView)v.findViewById(R.id.img_childlayout_AVAILABILITY); ImageView friendPics = (ImageView)v.findViewById(R.id.ivFriendPics); if(ci.getStatusState() == 1){ img_availabiliy.setImageResource(R.drawable.online); } else if(ci.getStatusState()==0){ img_availabiliy.setImageResource(R.drawable.offline); } else if (ci.getStatusState()==2) { img_availabiliy.setImageResource(R.drawable.away); } else if(ci.getStatusState()==3){ img_availabiliy.setImageResource(R.drawable.busy); } else{ img_availabiliy.setImageDrawable(null); } if((groupPosition == 1 && childPosition == 0)){ friendPics.setImageResource(R.drawable.inviteto_ccm); img_availabiliy.setVisibility(View.INVISIBLE); } else if(groupPosition == 2 && childPosition == 0){ friendPics.setImageResource(R.drawable.new_ccmgroup); img_availabiliy.setVisibility(View.VISIBLE); }else{ if(ci.getPicture()!= null){ Bitmap bitmap = BitmapFactory.decodeByteArray(ci.getPicture(), 0, ci.getPicture().length); bitmap = Bitmap.createScaledBitmap(bitmap, 50, 50, true); friendPics.setImageBitmap(bitmap); }else{ friendPics.setImageResource(R.drawable.avatar); } img_availabiliy.setVisibility(View.VISIBLE); } return v; } @Override public int getChildrenCount(int groupPosition) { return childs.get(groupPosition).size(); } @Override public Object getGroup(int groupPosition) { return groups.get(groupPosition); } @Override public int getGroupCount() { return groups.size(); } @Override public long getGroupId(int groupPosition) { return (long) (groupPosition * 1024); } @Override public View getGroupView(int groupPosition, boolean isExpanded, View convertView, ViewGroup parent) { View v = null; if (convertView != null) v = convertView; else v = inflater.inflate(R.layout.group_layout, parent, false); String gt = (String) getGroup(groupPosition); TextView tv2 = (TextView) v.findViewById(R.id.tvGroup); if (gt != null) tv2.setText(gt); /**Set Image on group layout, Max/min*/ View ind = v.findViewById( R.id.explist_indicator); View groupInd = v.findViewById( R.id.llgroup); if( ind != null ) { ImageView indicator = (ImageView)ind; if( getChildrenCount( groupPosition ) == 0 ) { indicator.setVisibility( View.INVISIBLE ); } else { indicator.setVisibility( View.VISIBLE ); int stateSetIndex = ( isExpanded ? 1 : 0) ; Drawable drawable = indicator.getDrawable(); drawable.setState(GROUP_STATE_SETS[stateSetIndex]); } } if( groupInd != null ) { RelativeLayout indicator2 = (RelativeLayout)groupInd; if( getChildrenCount( groupPosition ) == 0 ) { indicator2.setVisibility( View.INVISIBLE ); } else { indicator2.setVisibility( View.VISIBLE ); int stateSetIndex = ( isExpanded ? 1 : 0) ; Drawable drawable2 = indicator2.getBackground(); drawable2.setState(GROUP_STATE_SETS[stateSetIndex]); } } return v; } @Override public boolean hasStableIds() { return true; } @Override public boolean isChildSelectable(int groupPosition, int childPosition) { return true; } public void onGroupCollapsed(int groupPosition) { } public void onGroupExpanded(int groupPosition) { } } I just want to update my list in ON PRESENCE CHANGED method in the Service class.. Please suggest me a means to do the same.

    Read the article

  • WPF MenuItem.Command binding to ElementName results to System.Windows.Data Error: 4 : Cannot find so

    - by e28Makaveli
    I have the following XAML: <UserControl x:Class="EMS.Controls.Dictionary.TOCControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:EMS.Controls.Dictionary.Models" xmlns:diagnostics="clr-namespace:System.Diagnostics;assembly=WindowsBase" x:Name="root" > <TreeView x:Name="TOCTreeView" Background="White" Padding="3,5" ContextMenuOpening="TOCTreeView_ContextMenuOpening" ItemsSource="{Binding Children}" BorderBrush="{x:Null}" > <TreeView.ItemTemplate> <HierarchicalDataTemplate ItemsSource="{Binding Path=Children, Mode=OneTime}"> <Grid > <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <!--<ColumnDefinition Width="Auto"/>--> <ColumnDefinition Width="*"/> </Grid.ColumnDefinitions> <!--<CheckBox VerticalAlignment="Center" IsChecked="{Binding IsVisible}"/>--> <ContentPresenter Grid.Column="0" Height="16" Width="20" Content="{Binding LayerRepresentation}" /> <!--<ContentPresenter Grid.Column="1" > <ContentPresenter.Content> Test </ContentPresenter.Content> </ContentPresenter>--> <TextBlock Grid.Column="2" FontWeight="Normal" Text="{Binding Path=Alias, Mode=OneWay}" > <ToolTipService.ToolTip> <TextBlock Text="{Binding Description}" TextWrapping="Wrap"/> </ToolTipService.ToolTip> </TextBlock> </Grid> <HierarchicalDataTemplate.ItemTemplate> <HierarchicalDataTemplate ItemsSource="{Binding Path=Children, Mode=OneTime}"> <!--<DataTemplate>--> <Grid > <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="*"/> </Grid.ColumnDefinitions> <CheckBox VerticalAlignment="Center" IsChecked="{Binding IsVisible}"/> <ContentPresenter Grid.Column="1" Content="{Binding LayerRepresentation, Mode=OneWay}" /> <TextBlock Margin="0,1,0,1" Text="{Binding Path=Alias, Mode=OneWay}" Grid.Column="2"> <ToolTipService.ToolTip> <TextBlock Text="{Binding Description}" TextWrapping="Wrap"/> </ToolTipService.ToolTip> </TextBlock> </Grid> <!--</DataTemplate>--> </HierarchicalDataTemplate> </HierarchicalDataTemplate.ItemTemplate> </HierarchicalDataTemplate> </TreeView.ItemTemplate> <TreeView.ContextMenu> <ContextMenu> <MenuItem Name="miRemove" Header="Remove" Command="{Binding ElementName=root, Path=RemoveItemCmd, diagnostics:PresentationTraceSources.TraceLevel=High}"> <MenuItem.Icon> <Image Source="../images/16x16/Delete.png"/> </MenuItem.Icon> </MenuItem> <MenuItem Header="Properties" Command="{Binding ElementName=root, Path=GetItemPropertiesCmd}"/> </ContextMenu> </TreeView.ContextMenu> </TreeView> </UserControl> Code behind for this UserControl has two ICommand properties with names: RemoveItemCmd and GetItemPropertiesCmd. However, I get System.Windows.Data Error: 4 : Cannot find source for binding with reference 'ElementName=root'. BindingExpression:Path=RemoveItemCmd; DataItem=null; target element is 'MenuItem' (Name='miRemove'); target property is 'Command' (type 'ICommand') System.Windows.Data Error: 4 : Cannot find source for binding with reference 'ElementName=root'. BindingExpression:Path=GetItemPropertiesCmd; DataItem=null; target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand') when UserControl is constructed. Why is this and how do I resolve?

    Read the article

  • LVM mirror attempt results in "Insufficient free space"

    - by MattK
    Attempting to add a disk to mirror an LVM volume on CentOS 7 always fails with "Insufficient free space: 1 extents needed, but only 0 available". Having searched for a solution, I have tried specifying disks, multiple logging options, adding 3rd log partition, but have not found a solution Not sure if I am making a rookie mistake, or there is something more subtle wrong (I am more familiar with ZFS, new to using LVM): # lvconvert -m1 centos_bi/home Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --corelog centos_bi/home Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --corelog --alloc anywhere centos_bi/home Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --mirrorlog mirrored --alloc anywhere centos_bi/home /dev/sda2 Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --corelog --alloc anywhere centos_bi/home /dev/sdi2 /dev/sda2 Insufficient free space: 1 extents needed, but only 0 available The two disks are of the same size, and have identical partition layouts via "sfdisk -d /dev/sdi part_table; sfdisk /dev/sda < part_table". The current configuration is detailed below. # pvs PV VG Fmt Attr PSize PFree /dev/sda1 centos_bi lvm2 a-- 496.00m 496.00m /dev/sda2 centos_bi lvm2 a-- 465.27g 465.27g /dev/sdi2 centos_bi lvm2 a-- 465.27g 0 # vgs VG #PV #LV #SN Attr VSize VFree centos_bi 3 3 0 wz--n- 931.02g 465.75g # lvs -a -o +devices LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert Devices home centos_bi -wi-ao---- 391.64g /dev/sdi2(6050) root centos_bi -wi-ao---- 50.00g /dev/sdi2(106309) swap centos_bi -wi-ao---- 23.63g /dev/sdi2(0) # pvdisplay --- Physical volume --- PV Name /dev/sdi2 VG Name centos_bi PV Size 465.27 GiB / not usable 3.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 119109 Free PE 0 Allocated PE 119109 --- Physical volume --- PV Name /dev/sda2 VG Name centos_bi PV Size 465.27 GiB / not usable 3.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 119109 Free PE 119109 Allocated PE 0 --- Physical volume --- PV Name /dev/sda1 VG Name centos_bi PV Size 500.00 MiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 124 Free PE 124 Allocated PE 0 # vgdisplay --- Volume group --- VG Name centos_bi System ID Format lvm2 Metadata Areas 3 Metadata Sequence No 10 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 3 Max PV 0 Cur PV 3 Act PV 3 VG Size 931.02 GiB PE Size 4.00 MiB Total PE 238342 Alloc PE / Size 119109 / 465.27 GiB Free PE / Size 119233 / 465.75 GiB # lvdisplay --- Logical volume --- LV Path /dev/centos_bi/swap LV Name swap VG Name centos_bi LV Write Access read/write LV Creation host, time localhost, 2014-08-07 16:34:34 -0400 LV Status available # open 2 LV Size 23.63 GiB Current LE 6050 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Path /dev/centos_bi/home LV Name home VG Name centos_bi LV Write Access read/write LV Creation host, time localhost, 2014-08-07 16:34:35 -0400 LV Status available # open 1 LV Size 391.64 GiB Current LE 100259 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Path /dev/centos_bi/root LV Name root VG Name centos_bi LV Write Access read/write LV Creation host, time localhost, 2014-08-07 16:34:37 -0400 LV Status available # open 1 LV Size 50.00 GiB Current LE 12800 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0

    Read the article

  • Ubuntu 8.04 server is not retaining a static IP address

    - by James Pierce
    I recently setup a linux box running Ubuntu 8.04 (to match another server with 8.04). I need to insure that this box has a static IP address and I changed /etc/network/interfaces to set up the static IP address and when I run sudo /etc/init.d/networking restart it works fine for a while, but always reverts back to 10.0.1.24 after being idle for a while. I also tried stopping/removing the dhcp client, but that didn't help. sudo /etc/init.d/dhcp stop sudo apt-get remove dhcp3-client Here is my /etc/init.d/networking: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.0.1.4 netmask 255.255.255.0 broadcast 10.0.1.255 gateway 10.0.1.1 Any thoughts? Thanks.

    Read the article

  • Can the Dell PowerEdge T320 boot from a USB stick in hard drive emulation mode?

    - by Icydog
    I am trying to install FreeNAS on a Dell PowerEdge T320. I've followed the instructions here (http://doc.freenas.org/index.php/Burning_an_IMG_File) to write the .img file to four different USB sticks with dd if=FreeNAS-9.2.1.5-RELEASE-x64.img of=/dev/sde, but I can't boot off of any of them. When I try to boot, I get the following screen: F1 FreeBSD F2 FreeBSD F3 Drive 0 Then it auto-selects F1 and either prints # about once a second forever, or it sits with a blinking cursor doing nothing. Forum posts and the wiki page linked above say to set the USB boot emulation mode to hard disk (as opposed to auto or CD/DVD/floppy), and older Dell PowerEdge models including the T310 have this option in the BIOS settings, but I cannot find it on the T320 with the latest BIOS 2.1.2. I have even tried writing the USB image to a USB hard disk, but with the same lack of success. Has anyone been able to find this USB boot setting on a T320, or been able to boot FreeNAS/FreeBSD from USB in some other way on a T320?

    Read the article

  • Juniper SSG-5 subinterface vlan routing to the internet

    - by catfish
    I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

    Read the article

  • vpnc Not Adding Internal DNS Servers to resolv.conf

    - by AJ
    I'm trying to setup vpnc on Ubuntu. When I run vpnc, my resolv.conf file does not get changed. It still only contains my ISP's name servers: #@VPNC_GENERATED@ -- this file is generated by vpnc # and will be overwritten by vpnc # as long as the above mark is intact nameserver 65.32.5.111 nameserver 65.32.5.112 Here is my /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.3 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 65.32.5.111 65.32.5.112 Any tips on how to troubleshoot/resolve this? Thanks in advance.

    Read the article

  • How is WPF Data Binding using Object Data Source in Visual Studio 2010 done?

    - by Rob Perkins
    This is probably mostly a question about how to use the VS 2010 IDE tools in a way the Microsofties didn't specifically intend. But since this is something I immediately tried without success. I have defined a .NET 4.0 WPF Application project with a simple class that looks like this: Public Class Class1 Public Property One As String = "OneString" Public Property Two As String = "TwoString" End Class I then defined it as an "Object Data Source" in VS2010, using the IDE's "Add New Data Source..." feature. This exposes the class members in a GUI element in the IDE as given in this image: Dragging "Class1" from that tool to the surface of "Window1.xaml" in a default "WPF Application" results in the design view looking like this: And generated XAML like this: <Window x:Class="Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="133" Width="170" xmlns:my="clr-namespace:WpfApplication1" mc:Ignorable="d" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" > <Window.Resources> <CollectionViewSource x:Key="Class1ViewSource" d:DesignSource="{d:DesignInstance my:Class1, CreateList=True}" /> </Window.Resources> <Grid DataContext="{StaticResource Class1ViewSource}" HorizontalAlignment="Left" Name="Grid1" VerticalAlignment="Top"> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="Auto" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> </Grid.RowDefinitions> <Label Content="One:" Grid.Column="0" Grid.Row="0" HorizontalAlignment="Left" Margin="3" VerticalAlignment="Center" /> <TextBlock Grid.Column="1" Grid.Row="0" Height="23" HorizontalAlignment="Left" Margin="3" Name="OneTextBlock" Text="{Binding Path=One}" VerticalAlignment="Center" /> <Label Content="Two:" Grid.Column="0" Grid.Row="1" HorizontalAlignment="Left" Margin="3" VerticalAlignment="Center" /> <TextBlock Grid.Column="1" Grid.Row="1" Height="23" HorizontalAlignment="Left" Margin="3" Name="TwoTextBlock" Text="{Binding Path=Two}" VerticalAlignment="Center" /> </Grid> Note the data bindings Text="{Binding Path=One}" and Text="{Binding Path=Two}" in the TextBlock elements. Code-behind for Window1.xaml has this in Window_Loaded: Class Window1 Private m_c1 As New Class1 Private Sub Window1_Loaded(ByVal sender As Object, ByVal e As System.Windows.RoutedEventArgs) Handles Me.Loaded Dim Class1ViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("Class1ViewSource"), System.Windows.Data.CollectionViewSource) 'Load data by setting the CollectionViewSource.Source property: 'Class1ViewSource.Source = [generic data source] Me.DataContext = m_c1 End Sub End Class Running the application produces this output: The expected result was that "OneString" would appear next to "One" and "TwoString" next to "Two" in the running window. The question is: Why didn't this work? What will work instead? If I put bindings in a DataTemplate, it works. Blend, with its sample data stuff, implied that this should work, but it doesn't. I know I'm missing something pretty fundamental here; what is it?

    Read the article

  • WCF Service, Java JApplet client, transport error 405

    - by Juan Zamudio
    Hi all, I'm having a problem with a WCF Service and Java Client, I will try to give as much information as i can, thanks for your time. The Endpoint of the server is BasicHttpBinding, I tried hosting the server as a Windows Service and in IIS but nothing changed. The weird thing is that the Client works great if I use a simple class, in the moment I switch the class to an JApplet I get the problem mentioned. I'm using Eclipse as an IDE, I tried Axis and Metro to generate the stub with the same bad results. Here is an example of the Java class where everything is working public class TestSoaMetro { public String TestMethod(){ String result=null; IDigitalSignatureService aa = new DigitalSignatureService().getBasicHttpBindingEndpoint(); try { result= aa.getData("1", "id002962"); } catch (IDigitalSignatureServiceGetDataArgumentExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IDigitalSignatureServiceGetDataInvalidOperationExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } return result; } } Here is the example of the JApplet where I get the error: public class TestSoaMetroApplet extends JApplet { public void init() { Container content = getContentPane(); content.setBackground(Color.white); content.setLayout(new FlowLayout()); String result= this.TestMethod(); JLabel label = new JLabel(result); content.add(label); } public String TestMethod(){ String result=null; IDigitalSignatureService aa = null; try { aa = new DigitalSignatureService().getBasicHttpBindingEndpoint(); result= aa.getData("1", "id002962"); } catch (IDigitalSignatureServiceGetDataArgumentExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IDigitalSignatureServiceGetDataInvalidOperationExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } return result; } } In the moment the Applet loads I get the error, is the exact same call so I don't understand why I get the exception using the Applet. I Also tried to call this from a Silverlight client and I was getting a security exception, this is where I found out about clientaccesspolicy.xml and crossdomain.xml, I added clientaccesspolicy.xml to the service and the Silverlight Client works great, so I decided to try crossdomain.xml and nothing, the Applet still does not work. I will put the stack trace at the end, thanks all for your time. Juan Zamudio javax.xml.ws.WebServiceException: org.apache.axis2.AxisFault: Transport error: 405 Error: Method not allowed at org.apache.axis2.jaxws.ExceptionFactory.createWebServiceException(ExceptionFactory.java:175) at org.apache.axis2.jaxws.ExceptionFactory.makeWebServiceException(ExceptionFactory.java:70) at org.apache.axis2.jaxws.ExceptionFactory.makeWebServiceException(ExceptionFactory.java:128) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.execute(AxisInvocationController.java:559) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.doInvoke(AxisInvocationController.java:118) at org.apache.axis2.jaxws.core.controller.impl.InvocationControllerImpl.invoke(InvocationControllerImpl.java:82) at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invokeSEIMethod(JAXWSProxyHandler.java:317) at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invoke(JAXWSProxyHandler.java:159) at $Proxy12.getData(Unknown Source) at TestSoaMetroApplet.TestMethod(TestSoaMetroApplet.java:28) at TestSoaMetroApplet.init(TestSoaMetroApplet.java:19) at sun.applet.AppletPanel.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: org.apache.axis2.AxisFault: Transport error: 405 Error: Method not allowed at org.apache.axis2.transport.http.HTTPSender.handleResponse(HTTPSender.java:295) at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:190) at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75) at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:389) at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:222) at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:435) at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402) at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229) at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.execute(AxisInvocationController.java:554) ... 9 more

    Read the article

  • Unexpected results from custom partitioning scheme - Ubuntu preseed unattended install

    - by Mark Renouf
    Hi... I need some help with partman-auto custom recipe in preseed.... it's doing unexpected things, the docs aren't so clear. This is in my preseed file: d-i partman-auto/expert_recipe string \ boot-root-var :: \ 1024 100 1024 ext4 \ $primary{ } $bootable{ } \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ /boot } \ . \ 2048 50 4096 ext4 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ / } \ . \ 4096 25 100000 ext4 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext4 } \ mountpoint{ /var } \ . \ 256 75 100% linux-swap \ method{ swap } format{ } \ . Given an 80GB drive. I ended up with these partitions: / 2GB /boot 1GB /var 4GB swap 72GB What went wrong? What I want is: / 2GB /boot 1GB /var 72GB swap 4GB

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Confusion on networking service start/stop in Ubuntu

    - by Daniel Ball
    I'm preparing to move and took down two of my servers, leaving only one with some essential services running. What I neglected to consider was that one was the DHCP server(which I realized when somebody contacted me saying they couldn't connect. Whups). So because I only have a few hosts on this small network, I opted to just statically configure them for now. One of these is a new Ubuntu 11.04 server, where I have very little experience. I edited /etc/network/interfaces and /etc/hosts to reflect my changes. I ran $sudo /etc/init.d/networking stop *deconfiguring network interfaces ... So yay. Then I try to start, it gives me the mumbo jumbo about using services (why didn't it do that for the stop?) So instead I run ... $sudo service networking start networking stop/waiting Now, to me that says the status of the service is stopped. But when I ping another computer, I get a successful reply. So is it not actually stopped? More importantly, am I doing something wrong? Edit daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking stop stop: Unknown instance: daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking start networking stop/waiting daniel@FOOBAR:~$ sudo service networking status networking stop/waiting So you can see why I ran /etc/init.d/networking stop instead. For some reason upstart (that is what "services" is, right?) isn't working with stop. cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 FOOBAR 198.3.9.2 FOOBAR #Added entry July 19 2011 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # hostname FOOBAR auto eth0 iface eth0 inet static address 198.3.9.2 netmask 255.255.255.0 network 198.3.9.0 broadcast 198.3.9.255 gateway 198.3.9.15 No I didn't save backups, it was just a minor change so I just commented out the old DHCP setting. Edit I set everything back to original settings and set up a DHCP server. "starting" networking does the same thing. I can only assume this is normal, I just don't know WHY. It can't be anything to do with the configuration files, since they've been restored.

    Read the article

  • Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

    - by 2020mobile
    Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

    Read the article

  • UNIX - mount: only root can do that

    - by Travesty3
    I need to allow a non-root user to mount/unmount a device. I am a total noob when it comes to UNIX, so please dumb it down for me. I've been looking all over teh interwebz to find an answer and it seems everyone is giving the same one, which is to modify /etc/fstab to include that device with the 'user' option (or 'users', tried both). Cool, well I did that and it still says "mount: only root can do that". Here are the contents of my fstab: # /etc/fstab: static file system information. # # Use 'vol_id --uuid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 # / was on /dev/mapper/minicc-root during installation UUID=1a69f02a-a049-4411-8c57-ff4ebd8bb933 / ext3 relatime,errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=038498fe-1267-44c4-8788-e1354d71faf5 /boot ext2 relatime 0 2 # swap was on /dev/mapper/minicc-swap_1 during installation UUID=0bb583aa-84a8-43ef-98c4-c6cb25d20715 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/scd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 /dev/sdb1 /mnt/sdcard auto auto,user,rw,exec 0 0 My thumb drive partition shows up as /dev/sdb1. I'm pretty sure my fstab is set up OK, but everyone on the other posts seems to fail to mention how they actually call the 'mount' command once this entry is in the fstab file. I think this is where my problem may be. The command I use to mount the drive is: $ mount /dev/sdb1 /mnt/sdcard. /bin/mount is owned by root and is in the root group and has 4755 permissions. /bin/umount is owned by root and is in the root group and has 4755 permissions. /mnt/sdcard is owned by me and is in one of my groups and has 0755 permissions. My mount command works fine if I use sudo, but I need to be able to do this without sudo (need to be able to do it from a PHP script using shell_exec). Any suggestions? Sorry for making you read so much...just trying to get as much info in the initial post as possible to preemptively answer questions about configuration stuff. If I missed anything tho, ask away. Thanks! -Travis

    Read the article

  • Setting up two screens in Xorg

    - by viraptor
    I'be got two Nvidia cards, but Xorg activates only one of them. The following config is based on the nvidia configurator output: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "HP LE2201w" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Acer AL2017" HorizSync 30.0 - 82.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 6100 nForce 405" BusID "PCI:0:13:0" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 8400 GS" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection What I see in the log file is: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 11:08:08 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (==) No device specified for screen "Screen0". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (==) No device specified for screen "Screen1". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices even though later on both cards are detected: (--) PCI:*(0:0:13:0) 10de:03d1:1019:2601 nVidia Corporation C61 [GeForce 6100 nForce 405] rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 10de:0422:0000:0000 nVidia Corporation G86 [GeForce 8400 GS] rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ --- some more logs --- ] (II) Mar 19 11:08:10 NVIDIA(0): NVIDIA GPU GeForce 6100 nForce 405 (C61) at PCI:0:13:0 (II) Mar 19 11:08:10 NVIDIA(0): (GPU-0) [ --- some more logs --- ] (II) Mar 19 11:08:12 NVIDIA(GPU-1): NVIDIA GPU GeForce 8400 GS (G86) at PCI:2:0:0 (GPU-1) Unfortunately later on only one card is initialised and one screen is active. Xrandr shows only one screen too. Any ideas on how to fix it?

    Read the article

  • KVM-Guests can't get past bridge - no internet connection

    - by tmn29a
    I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

    Read the article

  • Virtual Network Interface and NAT disables localhost access for MySQL and Apache

    - by Interarticle
    I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >