Search Results

Search found 3401 results on 137 pages for 'blue faces'.

Page 77/137 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • How to diagnose a Windows XP hard crash

    - by Jon
    I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

    Read the article

  • memtest incorrectly recognizes my RAM

    - by Brendan Abel
    I recently built a computer and randomly got a couple blue screens. I've run memtest and one of the memory sticks consistently throws memtest errors, while the other does not. The odd part is, memtest lists the following settings for my RAM: RAM: 535 MHz DDR 107 / CAS 2.5-1-3-1 DDR1 128 bits But my RAM is DDR3 1600? Memtest also lists my cpu as AMD K8, even though it's K10. I've probably going to RMA the ram stick, but I just wanted to see if anyone had any insight into the weird memtest stats.

    Read the article

  • Weird RAM Upgrade Experience

    - by Axel Isouard
    I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

    Read the article

  • No display but video card fans spins

    - by Marc
    Since I moved my computer there's no display when I plug my screen in the video card but works fine in the mother board. I tried reseting the cmos, but I still have the same problem. The fans are spining and there's a light from the card. I tried the DVI ports and the HDMI Here's my build. I have it for 2 months and everything was working fine. Do you think it's the video card? Asus p8z68-v pro gen3 Intel i7 2600k 120 GB OCZ Agility 3 16 GB RAM Blue Corsair DDR3 Asus GTX 570 H80 Corsair liquid cooling XFX PRO750W 80Plus bronze power supply EDIT That's why And I can't push more cause the card is on this Thank you everyone! I fixed it by pushing the mobo from the other side of the case and now it fits.

    Read the article

  • Toshiba Equium A110-252 laptop won't boot Windows.

    - by Drew Gibson
    I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

    Read the article

  • Failing RAM, or something else?

    - by Thanatos
    I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

    Read the article

  • What does motherboard RAM slot colors mean?

    - by totymedli
    I always saw that the motherboard RAM slots are colored in pairs, but never know what does it means. I just put the 2 RAM in, and after a few tries it always worked. But after I tried to install a third one it always throws me a blue screen of death. Is there an order how should I install RAM to the borad? What does the colors mean? Does they indicate performance boost opportunity or are they just a guide for installation?

    Read the article

  • Virtualbox won't run Fedora 10 64 bit iso

    - by David
    I am using VirtualBox on a Ubuntu 10.04 64bit host. I would like to install a Fedora 64bit guest. When I try to run the 64bit live cd, it says "Automatic boot in 10 seconds..." after which I get a blue background with no menu options. I am familiar with Ubuntu but not Fedora. I have been able to install a Fedora 32 bit system just fine. Any suggestions? I am trying to run an rpm that won't run in Ubuntu even using alien. .

    Read the article

  • How to clear contents of cell in Excel?

    - by Ken
    I've been sent an Excel spreadsheet with a weird first row. Some of the cells say "Column1", "Column2", etc., but I can't delete their contents. If I select the cell and hit backspace, it goes blank, but when I press return, it goes right back to saying "Column1". I found another answer here that suggested this could be caused by "Cell validation", but the validation window says "Any value", and also "show alert" (and I'm not seeing an alert), so I don't think that's it. The first row is white text on a blue background, if that means anything. The spreadsheet was sent to me in XLSX format, but I tried resaving as XLS and opening that, and it seems to make no difference. This is with the "ribbon" version of Excel (they got rid of the Help menu so I don't know how to see what version number it is!). Thanks!

    Read the article

  • When copying VM filesystem over netcat, dd copies double the disk size

    - by JivanAmara
    I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

    Read the article

  • Updating windows xp hard drive controller from ubuntu live disk

    - by Joel
    The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

    Read the article

  • BSOD after PC has been running for a while

    - by user1389999
    I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

    Read the article

  • Problems installing Windows 7 on Dell Inspiron 531 desktop

    - by wardedmocha
    Hello. I am having a problem installing Windows 7 on a Dell Inspiron 531 desktop. I got the setup to run and now it was trying to restart and now the computer just beeps. Two times a second, one right after the other. The beep is not like a key is being held down. And the computer isn't showing anything on the screen. edit: this is a computer I am trying to fix there where two blue screen errors that I know of. the first one had something to do with a display driver the second one was unknown

    Read the article

  • How to embed word doc as background picture of an Access report using .EMF or equivalent ?

    - by iDevlop
    My company's standard paper has logo, address and all the details in the right margin with a vertical blue line. I have that as a word template. I want to have the same thing as the background of my Invoices report. I managed to do that 5 years ago by saving to EMF format (vector format, prints out nicely) and putting the file as the background of the report. Now my company is moving, and I need to change the address on my invoices, but I can't find out how I did to convert the word doc to EMF. Any suggestion ? By EMF or another process, but I want to avoid BMP, which is huge and does not print nicely. Thanks !

    Read the article

  • Failing RAM, or something else? [closed]

    - by Thanatos
    I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

    Read the article

  • How can I replace red in an image with a certain shade of gray?

    - by Malcolm Frexner
    In this image I have to change red to grey: I know I can just set the saturation to zero, but then the result is a grey that is to dark. I could just change the brightness, but that would also change the left lower part of the picture: Is there an adjustment that only works on the red parts of the image? I can't use a selection, because the setting has to be applied to lots of images. EDIT I tried to use "replace adjustment tool", but that did not work well for the shdows and bright parts of the image, even with the largest fuzzines. I used blue as the replacement colour, to have a better impression of what it does.

    Read the article

  • Multiple Graphics Cards on Fedora 15 (Gnome 3)

    - by Michael
    I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

    Read the article

  • "Press Tab to search <site>" in Chrome not working

    - by YatharthROCK
    The problem After partially entering a URL like meta.st, Chrome adds in the rest of the URL slected in blue and says "Press Tab to search Meta Stack Overflow". But on pressing, it just moves the cursor to the next item like in a normal text-field. Other info I'm on Windows 7 Home Basic. My Chrome version number is 22.0.1229.52 beta-m (beta channel). This was working before. What I've tried I've reported it in Chrome (by going to Options Tools Report an issue...). I've also tried deleting all my custom search engines (they might've been interfering) and also tried creating a new profile. I also googled, but to no avail. How do I fix this? Thanks.

    Read the article

  • Sound card issues (High Definition Audio Controller)

    - by Prakash R
    I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

    Read the article

  • Is it possible to use the bluetooth adapter from my logitech keyboard to connect headset?

    - by King Chan
    So, as titled. I have a bluetooth wireless keyboard that goes with the bluetooth adapter from Logitech 2 years ago. Recently I just brought a bluetooth headset from other company, but I wonder if I can reuse the bluetooth adapter from Logitech to use the headset? I don't seems to find an option in my control panel that allows me to add the headset device.... Or the blue adapter that comes with Logitech is only able to connect to the logitech keyboard? In that case, if I buy a bluetooth adapter, will it possible to share 1 bluetooth adapter with two device? (1 to 2? not 1 to 1?)

    Read the article

  • how to protect from editing or converting to text a pdf file?

    - by Layla
    I am using a version of Ms Office of 2010, it was a beta version of public domain (I dont recall the name, but I believe it was called Blue version or something like that). I usually make my documents using the MS Word and then saving it like a pdf file using the function to publish as a pdf file within Word. The problem that I have is that some people are converting my documents into text, putting their name on it, and credited my work to them; so I would like to know if there is a way to: protect with a password the editing of my document protect it from converting into txt, with a password if its possible maybe but a digital signature in which it says my name as an author I want that the people who access it can only read it, and nothing more. I am using MS Word 2010 and Foxit Pdf (an old version), I usually do not use Adobe Acrobat. Thanks

    Read the article

  • Can I run my OS from a DVD?

    - by Dave D
    I'm thinking of ways to get around the high cost of hard drives lately. I was thinking an optical jukebox would be interesting (though more expensive than just buying a hard drive), then thought I've heard of OS's run from DVD so why not boot from a Blue-ray drive. I think a smaller OS like a linux flavor would work. I'd like to know if there's a way I could burn Windows 7 to DVD for this use. Just curious. Anyone know if this is possible? Thanks, Mac

    Read the article

  • Snow Leopard Hangs at Login Window

    - by jessecurry
    I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

    Read the article

  • Drupal + GMap macro, map markers not displayed

    - by mingos
    Hi. I've run into a strange problem in the GMap module for Drupal. When I display a map inside a node using a GMap macro, everything is displayed correctly (according to what I specify in the macro or leave at default), save for map markers. I'm trying to specify a map marker, but it refuses to be displayed. My macro is the following: [gmap zoom=17 |center=53.77420697757659,20.474138259887695 |markers=big blue::53.77420697757659,20.474138259887695] I was unable to find any help on Drupal forums, both the official one and one local to my country. For completeness' sake, I do not wish to use a GMap view, just add a macro in a regular node. Hope you can help me find a solution. Thanks in advance for your replies...

    Read the article

  • How do I disable startup dll and programs in vista?

    - by phoenixoflight
    Here is the situation. I can't get into Vista or boot into safe mode. I get blue screened either way during the loading process. I would like to try to disable as many dlls and programs from loading at boot as I can. What files in vista do I change to go about doing this? All the guides I've seen do it from within Vista. I have a BartPE bootable cd that I'm using to get into the file system. I just need to know which files to modify. Thanks much for reading

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >