Search Results

Search found 3993 results on 160 pages for 'broken pipe'.

Page 77/160 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • xorg-edgers PPA with llvmpipe breaks AMD APU system

    - by linux_RRT
    I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

    Read the article

  • Lost WiFi after 12.10 upgrade

    - by Steven Guillory
    I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

    Read the article

  • Per-vertex animation with VBOs: Stream each frame or use index offset per frame?

    - by charstar
    Scenario Meshes are animated using either skeletons (skinned animation) or some form of morph targets (i.e. per-vertex key frames). However, in either case, the animations are known in full at load-time, that is, there is no physics, IK solving, or any other form of in-game pose solving. The number of character actions (animations) will be limited but rich (hand-animated). There may be multiple characters using a each mesh and its animations simultaneously in-game (they will be at different poses/keyframes at the same time). Assume color and texture coordinate buffers are static. Goal To leverage the richness of well vetted animation tools such as Blender to do the heavy lifting for a small but rich set of animations. I am aware of additive pose blending like that from Naughty Dog and similar techniques but I would prefer to expend a little RAM/VRAM to avoid implementing a thesis-ready pose solver. I would also like to avoid implementing a key-frame + interpolation curve solver (reinventing Blender vertex groups and IPOs). Current Considerations Much like a non-shader-powered pose solver, create a VBO for each character and copy vertex and normal data to each VBO on each frame (VBO in STREAMING). Create one VBO for each animation where each frame (interleaved vertex and normal data) is concatenated onto the VBO. Then each character simply has a buffer pointer offset based on its current animation frame (e.g. pointer offset = (numVertices+numNormals)*frameNumber). (VBO in STATIC) Known Trade-Offs In 1 above: Each VBO would be small but there would be many VBOs and therefore lots of buffer binding and vertex copying each frame. Both client and pipeline intensive. In 2 above: There would be few VBOs therefore insignificant buffer binding and no vertex data getting jammed down the pipe each frame, but each VBO would be quite large. Are there any pitfalls to number 2 (aside from finite memory)? Are there other methods that I am missing?

    Read the article

  • Are you ready to take a walk in the clouds?

    - by Steve Loethen
    Cloud computing is here, whether we want it or not.  When I say "a walk in the clouds” I am not talking about a pleasant romantic comedy, but a real alternative to hosting applications on-premise.  For years we have had the power to host our web sites on remote systems.  Sure, challenges existed.  Mostly web sites.  I could, with a few clicks, create a account at a myriad of web host sites, put my site in the hands of a remote hosting company, and boom, I was a site on the internet.  But choices, power, and management was limited. Now, we have a set of services to let us approach and power and control we love, but with scalability of the data center.  My personal web site is hosted on a laptop running hyperV in my basement.  I have to manage the machine, patch it, make sure it is powered up.  This is fine for the “hello, this is my dog skippy site” that I maintain. If the football pool I run has an issue, one of the 10 users I have calls or emails me and I go check it out.  All is well. But this falls well below the needs of even the simplest of enterprises.  A business needs a stronger datacenter, a better pipe to the world.  Do I really want to base my business on a dynamic dns and a dsl line from the local phone company? Cloud computing gives us most of what I value (control, a db of my own, updating my site from Visual Studio). Come learn how this technology can transform your business.  If you are a Microsoft shop, or are interested in Microsoft in the cloud, on April 8 and 9, a 2 day free Azure training class is being conducted in Kansas City.  http://www.azurebootcamp.com/city/kansascity Hope to see you there.  If you come, make sure you look me up.

    Read the article

  • Connected to wireless, but no internet access

    - by boogaloo
    After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

    Read the article

  • 3d Model Scaling With Camera

    - by spasarto
    I have a very simple 3D maze program that uses a first person camera to navigate the maze. I'm trying to scale the blocks that make up the maze walls and floor so the corridors seem more roomy to the camera. Every time I scale the model, the camera seems to scale with it, and the corridors always stay the same width. I've tried apply the scale to the model in the content pipe (setting the scale property of the model in the properties window in VS). I've also tried to apply the scale using Matrix.CreateScale(float) using the Scale-Rotate-Transform order with the same result. If I leave the camera speed the same, the camera moves slower, so I know it's traversing a larger distance, but the world doesn't look larger; the camera just seems slower. I'm not sure what part of the code to include since I don't know if it is an issue with my model, camera, or something else. Any hints at what I'm doing wrong? Camera: Projection = Matrix.CreatePerspectiveFieldOfView( MathHelper.PiOver4, _device.Viewport.AspectRatio, 1.0f, 1000.0f ); Matrix camRotMatrix = Matrix.CreateRotationX( _cameraPitch ) * Matrix.CreateRotationY( _cameraYaw ); Vector3 transCamRef = Vector3.Transform( _cameraForward, camRotMatrix ); _cameraTarget = transCamRef + CameraPosition; Vector3 camRotUpVector = Vector3.Transform( _cameraUpVector, camRotMatrix ); View = Matrix.CreateLookAt( CameraPosition, _cameraTarget, camRotUpVector ); Model: World = Matrix.CreateTranslation( Position );

    Read the article

  • How often is seq used in Haskell production code?

    - by Giorgio
    I have some experience writing small tools in Haskell and I find it very intuitive to use, especially for writing filters (using interact) that process their standard input and pipe it to standard output. Recently I tried to use one such filter on a file that was about 10 times larger than usual and I got a Stack space overflow error. After doing some reading (e.g. here and here) I have identified two guidelines to save stack space (experienced Haskellers, please correct me if I write something that is not correct): Avoid recursive function calls that are not tail-recursive (this is valid for all functional languages that support tail-call optimization). Introduce seq to force early evaluation of sub-expressions so that expressions do not grow to large before they are reduced (this is specific to Haskell, or at least to languages using lazy evaluation). After introducing five or six seq calls in my code my tool runs smoothly again (also on the larger data). However, I find the original code was a bit more readable. Since I am not an experienced Haskell programmer I wanted to ask if introducing seq in this way is a common practice, and how often one will normally see seq in Haskell production code. Or are there any techniques that allow to avoid using seq too often and still use little stack space?

    Read the article

  • E: Sub-process /usr/bin/dpkg returned an error code (1)

    - by kss
    sudo apt-get install acroread, i got the following output Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: libldap2 libgnome-speech7 The following NEW packages will be installed: acroread 0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. (Reading database ... 237901 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./opt/Adobe/Reader9/Browser/intellinux/nppdf.so': No space left on device No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... /usr/bin/mandb: can't write to /var/cache/man/1645: No space left on device Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • foreign-architecture

    - by speedy-MACHO
    Always when I install something, I get the following error multiple times: Unknown configuration key 'foreign-architecture' found in your 'dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with 'dpkg --add-architecture' invocations at the command line. When I try dpkg --add-architecture I get: Unknown configuration key `foreign-architecture' found in your `dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with `dpkg --add-architecture' invocations at the command line. dpkg: error: --add-architecture takes one argument Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! I've no problems yet, but since it says This warning will become a hard error at a later date I better do something about this. When I search 'foreign-architecture', I find an empty file, containing not a single byte. I somehow can't delete that file. Please help, it's a kind of creapy...

    Read the article

  • SMTP server to deliver mail to Rails app, how?

    - by Gunchars
    all, this is my first question and I hope I chose the right place to post it. Here's what I need help with: I've been looking for this all day and I'm having a hard time finding a SMTP mail server that would fit the following criteria: lightweight, does one thing and does it good is able to route and deliver local mail to a Rails application The second point could be accomplished in any number of ways. I'm running a VPS, so I have full freedom in how to implement this. It could, for example, put messages straight in the db, pipe them to a helper program that would then process them accordingly or also save messages in a mbox file and run a script after every received message. I'm building a small site so the traffic is not going to be a problem. If there are alternative ways to deliver messages to a Rails app, I'd gladly hear about them. Thank you. EDIT: After long searching, I think I've found what I was looking for. Exim is a mail server that can deliver local mail to pipes. Also, Rails 3 and ActionMailer can make it really easy to process the incoming mail. More info here: http://www.exim.org/exim-html-current/doc/html/spec_html/ch29.html http://guides.rubyonrails.org/action_mailer_basics.html#receiving-emails

    Read the article

  • Computer becomes unreachable on lan after some time

    - by Ashfame
    I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

    Read the article

  • Conventions for search result scoring

    - by DeaconDesperado
    I assume this type of question is more on-topic here than on regular SO. I have been working on a search feature for my team's web application and have had a lot of success building a multithreaded, "divide and conquer" processing system to work through a large amount of fulltext. Our problem domain is pretty specific. Users of the app generate posts, and as a general rule, posts that are more recent are considered to be of greater relevance. Some of the data we are trying to extract from search is very specific (user's feelings about specific items or things) and we are using python nltk to do named-entity extraction to find interesting likely query terms. Essentially we look for descriptive adjective-noun pairs and generate a general picture of a user's expressed sentiment as a list of tokens. This search is intended as an internal tool for our team to draw out a local picture of sentiments like "soggy pizza." There's some machine learning in there too to do entity resolution on terms like "soggy" to all manner of adjectives expressing nastiness. My problem is I am at a loss for how to go about scoring these results. The text being searched is split up into tokens in a list, so my initial approach would be to normalize a float score between 0.0-1.0 generated off of how far into the list the terms appear and how often they are repeated (a later mention of the term being worth less, earlier more, greater frequency-greater score, etc.) A certain amount of weight could be given to the timestamp as well, though I am not certain how to calculate this. I am curious if anyone has had to solve a similar problem in a search relevance grading between appreciable metrics (frequency, term location/colocation, recency) and if there are and guidelines for how to weight each. I should mention as well that the final fallback procedure in the search is to pipe the query to Sphinx, which has its own scoring practices. Sphinx operates as the last resort in case our application specific processing can't find any eligible candidates.

    Read the article

  • Kubuntu apt-get -f install error

    - by ShaggyInjun
    I am seeing an error while running apt-get -f install. Can somebody help me out .. venkat@ubuntu:~/Downloads$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 256 not upgraded. 109 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 274641 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2- 0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2- 1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Bug: unable to handle kernel NULL pointer dereference at

    - by maria
    I have recently installed new system on my disc, Ubuntu 12.04. Installation proceeded without problems, I started installing additional software and put data from other discs. I had already two times bug report, it was quite long, and I have no idea how to acces to log file (which probably is somewhere saved) and since I had to switch off the computer using the button, anything else was possible, here is just a small part of it (what I've noted on paper) could not write bytes: Broken pipe speach dicpatcher disabled: edit etc/default/speach-dispatcher saned disabled: edit .... and than: BUG: unable to handle kernel NULL pointer dereference at 0000009c I've run Memory test in GRUB, everything is fine. First time it occured when I was using rsync, second time when I was trying to install texlive. Should I install whole system once again? Or can it be hardware problem? Or something else? If there is any hardware details which may be relevant, please ask, since I have no idea what is happening, I don't know what kind of information could be useful. Thanks P.S. dmesg output:

    Read the article

  • Outlook hangs during startup by step &ldquo;loading profile&rdquo;

    - by Marko Apfel
    Problem Starting Outlook shows only the splash screen with comment “loading profile”. I could cancel the startup but restarting shows the same. I verified with Task Manager that no hidden outlook process is bother me. Solution Scanpst Normally with Outlook the tool “Microsoft Outlook Inbox Repair Tool” (scanpst.exe) is additionally installed. Some people could access it via Startmenu, but not me. My lovely Launchy found it under "C:\Program Files (x86)\Microsoft Office\Office14\SCANPST.EXE" Scanpst first ask you for the pst file which you would like to scan. I started with the first default offer: C:\Users\…\AppData\Local\Microsoft\Outlook\….ost And this brings up the information, that another application uses this file. Handle To investigate the causer Handle from Sysinternals is your friend in such cases. Start it from an administrative console and pipe the output to a file. handle > c:\temp\handle.txt Now you could open this file with the editor of your choose and search for the blocked file (your pst file). On top of the section you see the application which has a handle to this file opened (SfdcMsO1.exe). Task Manager Kill this application and start Outlook again. And voila – everything starts up fine … by me

    Read the article

  • Squid + Dans Guardian (simple configuration)

    - by The Digital Ninja
    I just built a new proxy server and compiled the latest versions of squid and dansguardian. We use basic authentication to select what users are allowed outside of our network. It seems squid is working just fine and accepts my username and password and lets me out. But if i connect to dans guardian, it prompts for username and password and then displays a message saying my username is not allowed to access the internet. Its pulling my username for the error message so i know it knows who i am. The part i get confused on is i thought that part was handled all by squid, and squid is working flawlessly. Can someone please double check my config files and tell me if i'm missing something or there is some new option i must set to get this to work. dansguardian.conf # Web Access Denied Reporting (does not affect logging) # # -1 = log, but do not block - Stealth mode # 0 = just say 'Access Denied' # 1 = report why but not what denied phrase # 2 = report fully # 3 = use HTML template file (accessdeniedaddress ignored) - recommended # reportinglevel = 3 # Language dir where languages are stored for internationalisation. # The HTML template within this dir is only used when reportinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl cgi script. This option is faster, cleaner # and easier to customise the access denied page. # The language file is used no matter what setting however. # languagedir = '/etc/dansguardian/languages' # language to use from languagedir. language = 'ukenglish' # Logging Settings # # 0 = none 1 = just denied 2 = all text based 3 = all requests loglevel = 3 # Log Exception Hits # Log if an exception (user, ip, URL, phrase) is matched and so # the page gets let through. Can be useful for diagnosing # why a site gets through the filter. on | off logexceptionhits = on # Log File Format # 1 = DansGuardian format 2 = CSV-style format # 3 = Squid Log File Format 4 = Tab delimited logfileformat = 1 # Log file location # # Defines the log directory and filename. #loglocation = '/var/log/dansguardian/access.log' # Network Settings # # the IP that DansGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs, loopback, modem, etc. # Normally you would have your firewall protecting this, but if you want # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on proxyport = 3128 # accessdeniedaddress is the address of your web server to which the cgi # dansguardian reporting script was copied # Do NOT change from the default if you are not using the cgi. # accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl' # Non standard delimiter (only used with accessdeniedaddress) # Default is enabled but to go back to the original standard mode dissable it. nonstandarddelimiter = on # Banned image replacement # Images that are banned due to domain/url/etc reasons including those # in the adverts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and remove broken image # icons from banned domains. # 0 = off # 1 = on (default) usecustombannedimage = 1 custombannedimagefile = '/etc/dansguardian/transparent1x1.gif' # Filter groups options # filtergroups sets the number of filter groups. A filter group is a set of content # filtering options you can apply to a group of users. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where N is the filter # group. To assign users to groups use the filtergroupslist option. All users default # to filter group 1. You must have some sort of authentication to be able to map users # to a group. The more filter groups the more copies of the lists will be in RAM so # use as few as possible. filtergroups = 1 filtergroupslist = '/etc/dansguardian/filtergroupslist' # Authentication files location bannediplist = '/etc/dansguardian/bannediplist' exceptioniplist = '/etc/dansguardian/exceptioniplist' banneduserlist = '/etc/dansguardian/banneduserlist' exceptionuserlist = '/etc/dansguardian/exceptionuserlist' # Show weighted phrases found # If enabled then the phrases found that made up the total which excedes # the naughtyness limit will be logged and, if the reporting level is # high enough, reported. on | off showweightedfound = on # Weighted phrase mode # There are 3 possible modes of operation: # 0 = off = do not use the weighted phrase feature. # 1 = on, normal = normal weighted phrase operation. # 2 = on, singular = each weighted phrase found only counts once on a page. # weightedphrasemode = 2 # Positive result caching for text URLs # Caches good pages so they don't need to be scanned again # 0 = off (recommended for ISPs with users with disimilar browsing) # 1000 = recommended for most users # 5000 = suggested max upper limit urlcachenumber = # # Age before they are stale and should be ignored in seconds # 0 = never # 900 = recommended = 15 mins urlcacheage = # Smart and Raw phrase content filtering options # Smart is where the multiple spaces and HTML are removed before phrase filtering # Raw is where the raw HTML including meta tags are phrase filtered # CPU usage can be effectively halved by using setting 0 or 1 # 0 = raw only # 1 = smart only # 2 = both (default) phrasefiltermode = 2 # Lower casing options # When a document is scanned the uppercase letters are converted to lower case # in order to compare them with the phrases. However this can break Big5 and # other 16-bit texts. If needed preserve the case. As of version 2.7.0 accented # characters are supported. # 0 = force lower case (default) # 1 = do not change case preservecase = 0 # Hex decoding options # When a document is scanned it can optionally convert %XX to chars. # If you find documents are getting past the phrase filtering due to encoding # then enable. However this can break Big5 and other 16-bit texts. # 0 = disabled (default) # 1 = enabled hexdecodecontent = 0 # Force Quick Search rather than DFA search algorithm # The current DFA implementation is not totally 16-bit character compatible # but is used by default as it handles large phrase lists much faster. # If you wish to use a large number of 16-bit character phrases then # enable this option. # 0 = off (default) # 1 = on (Big5 compatible) forcequicksearch = 0 # Reverse lookups for banned site and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and search for both in the banned site and URL lists. This would # prevent a user from simply entering the IP for a banned address. # It will reduce searching speed somewhat so unless you have a local caching # DNS server, leave it off and use the Blanket IP Block option in the # bannedsitelist file instead. reverseaddresslookups = off # Reverse lookups for banned and exception IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer. This means you can put in hostnames in # the exceptioniplist and bannediplist. # It will reduce searching speed somewhat so unless you have a local DNS server, # leave it off. reverseclientiplookups = off # Build bannedsitelist and bannedurllist cache files. # This will compare the date stamp of the list file with the date stamp of # the cache file and will recreate as needed. # If a bsl or bul .processed file exists, then that will be used instead. # It will increase process start speed by 300%. On slow computers this will # be significant. Fast computers do not need this option. on | off createlistcachefiles = on # POST protection (web upload and forms) # does not block forms without any file upload, i.e. this is just for # blocking or limiting uploads # measured in kibibytes after MIME encoding and header bumph # use 0 for a complete block # use higher (e.g. 512 = 512Kbytes) for limiting # use -1 for no blocking #maxuploadsize = 512 #maxuploadsize = 0 maxuploadsize = -1 # Max content filter page size # Sometimes web servers label binary files as text which can be very # large which causes a huge drain on memory and cpu resources. # To counter this, you can limit the size of the document to be # filtered and get it to just pass it straight through. # This setting also applies to content regular expression modification. # The size is in Kibibytes - eg 2048 = 2Mb # use 0 for no limit maxcontentfiltersize = # Username identification methods (used in logging) # You can have as many methods as you want and not just one. The first one # will be used then if no username is found, the next will be used. # * proxyauth is for when basic proxy authentication is used (no good for # transparent proxying). # * ntlm is for when the proxy supports the MS NTLM authentication # protocol. (Only works with IE5.5 sp1 and later). **NOT IMPLEMENTED** # * ident is for when the others don't work. It will contact the computer # that the connection came from and try to connect to an identd server # and query it for the user owner of the connection. usernameidmethodproxyauth = on usernameidmethodntlm = off # **NOT IMPLEMENTED** usernameidmethodident = off # Preemptive banning - this means that if you have proxy auth enabled and a user accesses # a site banned by URL for example they will be denied straight away without a request # for their user and pass. This has the effect of requiring the user to visit a clean # site first before it knows who they are and thus maybe an admin user. # This is how DansGuardian has always worked but in some situations it is less than # ideal. So you can optionally disable it. Default is on. # As a side effect disabling this makes AD image replacement work better as the mime # type is know. preemptivebanning = on # Misc settings # if on it adds an X-Forwarded-For: <clientip> to the HTTP request # header. This may help solve some problem sites that need to know the # source ip. on | off forwardedfor = on # if on it uses the X-Forwarded-For: <clientip> to determine the client # IP. This is for when you have squid between the clients and DansGuardian. # Warning - headers are easily spoofed. on | off usexforwardedfor = off # if on it logs some debug info regarding fork()ing and accept()ing which # can usually be ignored. These are logged by syslog. It is safe to leave # it on or off logconnectionhandlingerrors = on # Fork pool options # sets the maximum number of processes to sporn to handle the incomming # connections. Max value usually 250 depending on OS. # On large sites you might want to try 180. maxchildren = 180 # sets the minimum number of processes to sporn to handle the incomming connections. # On large sites you might want to try 32. minchildren = 32 # sets the minimum number of processes to be kept ready to handle connections. # On large sites you might want to try 8. minsparechildren = 8 # sets the minimum number of processes to sporn when it runs out # On large sites you might want to try 10. preforkchildren = 10 # sets the maximum number of processes to have doing nothing. # When this many are spare it will cull some of them. # On large sites you might want to try 64. maxsparechildren = 64 # sets the maximum age of a child process before it croaks it. # This is the number of connections they handle before exiting. # On large sites you might want to try 10000. maxagechildren = 5000 # Process options # (Change these only if you really know what you are doing). # These options allow you to run multiple instances of DansGuardian on a single machine. # Remember to edit the log file path above also if that is your intention. # IPC filename # # Defines IPC server directory and filename used to communicate with the log process. ipcfilename = '/tmp/.dguardianipc' # URL list IPC filename # # Defines URL list IPC server directory and filename used to communicate with the URL # cache process. urlipcfilename = '/tmp/.dguardianurlipc' # PID filename # # Defines process id directory and filename. #pidfilename = '/var/run/dansguardian.pid' # Disable daemoning # If enabled the process will not fork into the background. # It is not usually advantageous to do this. # on|off ( defaults to off ) nodaemon = off # Disable logging process # on|off ( defaults to off ) nologger = off # Daemon runas user and group # This is the user that DansGuardian runs as. Normally the user/group nobody. # Uncomment to use. Defaults to the user set at compile time. # daemonuser = 'nobody' # daemongroup = 'nobody' # Soft restart # When on this disables the forced killing off all processes in the process group. # This is not to be confused with the -g run time option - they are not related. # on|off ( defaults to off ) softrestart = off maxcontentramcachescansize = 2000 maxcontentfilecachescansize = 20000 downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf' authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' Squid.conf http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? cache deny QUERY acl apache rep_header Server ^Apache #broken_vary_encoding allow apache access_log /squid/var/logs/access.log squid hosts_file /etc/hosts auth_param basic program /squid/libexec/ncsa_auth /squid/etc/userbasic.auth auth_param basic children 5 auth_param basic realm proxy auth_param basic credentialsttl 2 hours auth_param basic casesensitive off refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl NoAuthNec src <HIDDEN FOR SECURITY> acl BrkRm src <HIDDEN FOR SECURITY> acl Dials src <HIDDEN FOR SECURITY> acl Comps src <HIDDEN FOR SECURITY> acl whsws dstdom_regex -i .opensuse.org .novell.com .suse.com mirror.mcs.an1.gov mirrors.kernerl.org www.suse.de suse.mirrors.tds.net mirrros.usc.edu ftp.ale.org suse.cs.utah.edu mirrors.usc.edu mirror.usc.an1.gov linux.nssl.noaa.gov noaa.gov .kernel.org ftp.ale.org ftp.gwdg.de .medibuntu.org mirrors.xmission.com .canonical.com .ubuntu. acl opensites dstdom_regex -i .mbsbooks.com .bowker.com .usps.com .usps.gov .ups.com .fedex.com go.microsoft.com .microsoft.com .apple.com toolbar.msn.com .contacts.msn.com update.services.openoffice.org fms2.pointroll.speedera.net services.wmdrm.windowsmedia.com windowsupdate.com .adobe.com .symantec.com .vitalbook.com vxn1.datawire.net vxn.datawire.net download.lavasoft.de .download.lavasoft.com .lavasoft.com updates.ls-servers.com .canadapost. .myyellow.com minirick symantecliveupdate.com wm.overdrive.com www.overdrive.com productactivation.one.microsoft.com www.update.microsoft.com testdrive.whoson.com www.columbia.k12.mo.us banners.wunderground.com .kofax.com .gotomeeting.com tools.google.com .dl.google.com .cache.googlevideo.com .gpdl.google.com .clients.google.com cache.pack.google.com kh.google.com maps.google.com auth.keyhole.com .contacts.msn.com .hrblock.com .taxcut.com .merchantadvantage.com .jtv.com .malwarebytes.org www.google-analytics.com dcs.support.xerox.com .dhl.com .webtrendslive.com javadl-esd.sun.com javadl-alt.sun.com .excelsior.edu .dhlglobalmail.com .nessus.org .foxitsoftware.com foxit.vo.llnwd.net installshield.com .mindjet.com .mediascouter.com media.us.elsevierhealth.com .xplana.com .govtrack.us sa.tulsacc.edu .omniture.com fpdownload.macromedia.com webservices.amazon.com acl password proxy_auth REQUIRED acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 631 2001 2005 8731 9001 9080 10000 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port # https, snews 443 563 acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port # unregistered ports 1936-65535 acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 10000 acl Safe_ports port 631 acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT acl UTubeUsers proxy_auth "/squid/etc/utubeusers.list" acl RestrictUTube dstdom_regex -i youtube.com acl RestrictFacebook dstdom_regex -i facebook.com acl FacebookUsers proxy_auth "/squid/etc/facebookusers.list" acl BuemerKEC src 10.10.128.0/24 acl MBSsortnet src 10.10.128.0/26 acl MSNExplorer browser -i MSN acl Printers src <HIDDEN FOR SECURITY> acl SpecialFolks src <HIDDEN FOR SECURITY> # streaming download acl fails rep_mime_type ^.*mms.* acl fails rep_mime_type ^.*ms-hdr.* acl fails rep_mime_type ^.*x-fcs.* acl fails rep_mime_type ^.*x-ms-asf.* acl fails2 urlpath_regex dvrplayer mediastream mms:// acl fails2 urlpath_regex \.asf$ \.afx$ \.flv$ \.swf$ acl deny_rep_mime_flashvideo rep_mime_type -i video/flv acl deny_rep_mime_shockwave rep_mime_type -i ^application/x-shockwave-flash$ acl x-type req_mime_type -i ^application/octet-stream$ acl x-type req_mime_type -i application/octet-stream acl x-type req_mime_type -i ^application/x-mplayer2$ acl x-type req_mime_type -i application/x-mplayer2 acl x-type req_mime_type -i ^application/x-oleobject$ acl x-type req_mime_type -i application/x-oleobject acl x-type req_mime_type -i application/x-pncmd acl x-type req_mime_type -i ^video/x-ms-asf$ acl x-type2 rep_mime_type -i ^application/octet-stream$ acl x-type2 rep_mime_type -i application/octet-stream acl x-type2 rep_mime_type -i ^application/x-mplayer2$ acl x-type2 rep_mime_type -i application/x-mplayer2 acl x-type2 rep_mime_type -i ^application/x-oleobject$ acl x-type2 rep_mime_type -i application/x-oleobject acl x-type2 rep_mime_type -i application/x-pncmd acl x-type2 rep_mime_type -i ^video/x-ms-asf$ acl RestrictHulu dstdom_regex -i hulu.com acl broken dstdomain cms.montgomerycollege.edu events.columbiamochamber.com members.columbiamochamber.com public.genexusserver.com acl RestrictVimeo dstdom_regex -i vimeo.com acl http_port port 80 #http_reply_access deny deny_rep_mime_flashvideo #http_reply_access deny deny_rep_mime_shockwave #streaming files #http_access deny fails #http_reply_access deny fails #http_access deny fails2 #http_reply_access deny fails2 #http_access deny x-type #http_reply_access deny x-type #http_access deny x-type2 #http_reply_access deny x-type2 follow_x_forwarded_for allow localhost acl_uses_indirect_client on log_uses_indirect_client on http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access allow SpecialFolks http_access deny CONNECT !SSL_ports http_access allow whsws http_access allow opensites http_access deny BuemerKEC !MBSsortnet http_access deny BrkRm RestrictUTube RestrictFacebook RestrictVimeo http_access allow RestrictUTube UTubeUsers http_access deny RestrictUTube http_access allow RestrictFacebook FacebookUsers http_access deny RestrictFacebook http_access deny RestrictHulu http_access allow NoAuthNec http_access allow BrkRm http_access allow FacebookUsers RestrictVimeo http_access deny RestrictVimeo http_access allow Comps http_access allow Dials http_access allow Printers http_access allow password http_access deny !Safe_ports http_access deny SSL_ports !CONNECT http_access allow http_port http_access deny all http_reply_access allow all icp_access allow all access_log /squid/var/logs/access.log squid visible_hostname proxy.site.com forwarded_for off coredump_dir /squid/cache/ #header_access Accept-Encoding deny broken #acl snmppublic snmp_community mysecretcommunity #snmp_port 3401 #snmp_access allow snmppublic all cache_mem 3 GB #acl snmppublic snmp_community mbssquid #snmp_port 3401 #snmp_access allow snmppublic all

    Read the article

  • Log message Request and Response in ASP.NET WebAPI

    - by Fredrik N
    By logging both incoming and outgoing messages for services can be useful in many scenarios, such as debugging, tracing, inspection and helping customers with request problems etc.  I have a customer that need to have both incoming and outgoing messages to be logged. They use the information to see strange behaviors and also to help customers when they call in  for help (They can by looking in the log see if the customers sends in data in a wrong or strange way).   Concerns Most loggings in applications are cross-cutting concerns and should not be  a core concern for developers. Logging messages like this:   // GET api/values/5 public string Get(int id) { //Cross-cutting concerns Log(string.Format("Request: GET api/values/{0}", id)); //Core-concern var response = DoSomething(); //Cross-cutting concerns Log(string.Format("Reponse: GET api/values/{0}\r\n{1}", id, response)); return response; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } will only result in duplication of code, and unnecessarily concerns for the developers to be aware of, if they miss adding the logging code, no logging will take place. Developers should focus on the core-concern, not the cross-cutting concerns. By just focus on the core-concern the above code will look like this: // GET api/values/5 public string Get(int id) { return DoSomething(); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The logging should then be placed somewhere else so the developers doesn’t need to focus care about the cross-concern. Using Message Handler for logging There are different ways we could place the cross-cutting concern of logging message when using WebAPI. We can for example create a custom ApiController and override the ApiController’s ExecutingAsync method, or add a ActionFilter, or use a Message Handler. The disadvantage with custom ApiController is that we need to make sure we inherit from it, the disadvantage of ActionFilter, is that we need to add the filter to the controllers, both will modify our ApiControllers. By using a Message Handler we don’t need to do any changes to our ApiControllers. So the best suitable place to add our logging would be in a custom Message Handler. A Message Handler will be used before the HttpControllerDispatcher (The part in the WepAPI pipe-line that make sure the right controller is used and called etc). Note: You can read more about message handlers here, it will give you a good understanding of the WebApi pipe-line. To create a Message Handle we can inherit from the DelegatingHandler class and override the SendAsync method: public class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { return base.SendAsync(request, cancellationToken); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   If we skip the call to the base.SendAsync our ApiController’s methods will never be invoked, nor other Message Handlers. Everything placed before base.SendAsync will be called before the HttpControllerDispatcher (before WebAPI will take a look at the request which controller and method it should be invoke), everything after the base.SendAsync, will be executed after our ApiController method has returned a response. So a message handle will be a perfect place to add cross-cutting concerns such as logging. To get the content of our response within a Message Handler we can use the request argument of the SendAsync method. The request argument is of type HttpRequestMessage and has a Content property (Content is of type HttpContent. The HttpContent has several method that can be used to read the incoming message, such as ReadAsStreamAsync, ReadAsByteArrayAsync and ReadAsStringAsync etc. Something to be aware of is what will happen when we read from the HttpContent. When we read from the HttpContent, we read from a stream, once we read from it, we can’t be read from it again. So if we read from the Stream before the base.SendAsync, the next coming Message Handlers and the HttpControllerDispatcher can’t read from the Stream because it’s already read, so our ApiControllers methods will never be invoked etc. The only way to make sure we can do repeatable reads from the HttpContent is to copy the content into a buffer, and then read from that buffer. This can be done by using the HttpContent’s LoadIntoBufferAsync method. If we make a call to the LoadIntoBufferAsync method before the base.SendAsync, the incoming stream will be read in to a byte array, and then other HttpContent read operations will read from that buffer if it’s exists instead directly form the stream. There is one method on the HttpContent that will internally make a call to the  LoadIntoBufferAsync for us, and that is the ReadAsByteArrayAsync. This is the method we will use to read from the incoming and outgoing message. public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var requestMessage = await request.Content.ReadAsByteArrayAsync(); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); return response; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The above code will read the content of the incoming message and then call the SendAsync and after that read from the content of the response message. The following code will add more logic such as creating a correlation id to combine the request with the response, and create a log entry etc: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } public class MessageLoggingHandler : MessageHandler { protected override async Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message) { await Task.Run(() => Debug.WriteLine(string.Format("{0} - Request: {1}\r\n{2}", correlationId, requestInfo, Encoding.UTF8.GetString(message)))); } protected override async Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message) { await Task.Run(() => Debug.WriteLine(string.Format("{0} - Response: {1}\r\n{2}", correlationId, requestInfo, Encoding.UTF8.GetString(message)))); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   The code above will show the following in the Visual Studio output window when the “api/values” service (One standard controller added by the default WepAPI template) is requested with a Get http method : 6347483479959544375 - Request: GET http://localhost:3208/api/values 6347483479959544375 - Response: GET http://localhost:3208/api/values ["value1","value2"] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Register a Message Handler To register a Message handler we can use the Add method of the GlobalConfiguration.Configration.MessageHandlers in for example Global.asax: public class WebApiApplication : System.Web.HttpApplication { protected void Application_Start() { GlobalConfiguration.Configuration.MessageHandlers.Add(new MessageLoggingHandler()); ... } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Summary By using a Message Handler we can easily remove cross-cutting concerns like logging from our controllers. You can also find the source code used in this blog post on ForkCan.com, feel free to make a fork or add comments, such as making the code better etc. Feel free to follow me on twitter @fredrikn if you want to know when I will write other blog posts etc.

    Read the article

  • CodePlex Daily Summary for Friday, October 05, 2012

    CodePlex Daily Summary for Friday, October 05, 2012Popular ReleasesConfiguration Manager 2012 Automation: Beta Code (v0.1): Beta codefastJSON: v2.0.7: 2.0.7 - bug fix missing comma with single property and extension enabledWinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...MCEBuddy 2.x: MCEBuddy 2.3.1: 2.3.1All new Remote Client Server architecture. Reccomended Download. The Remote Client Installation is OPTIONAL, you can extract the files from the zip archive into a local folder and run MCEBuddy.GUI directly. 2.2.15 was the last standalone release. Changelog for 2.3.1 (32bit and 64bit) 1. All remote MCEBuddy Client Server architecture (GUI runs remotely/independently from engine now) 2. Fixed bug in Audio Offset 3. Added support for remote MediaInfo (right click on file in queue to get ...D3 Loot Tracker: 1.5: Support for session upload to website. Support for theme change through general settings. Time played counter will now also display a count for days. Tome of secrets are no longer logged as items.NTCPMSG: V1.2.0.0: Allocate an identify cableid for each single connection cable. * Server can asend to specified cableid directly.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...Korean String Extension for .NET: ?? ??? ??? ????(v0.2.3.0): ? ?? ?? ?? ???? - string.KExtract() ?? ???? - string.AppendJosa(...) AppendJosa(...)? ?? ???? KAppendJosa(...)? ??? ?????UMD????? - PC?: UMDEditor?????V2.7: ??:http://jianyun.org/archives/948.html =============================================================================== UMD??? ???? =============================================================================== 2.7.0 (2012-10-3) ???????“UMD???.exe”??“UMDEditor.exe” ?????????;????????,??????。??????,????! ??64????,??????????????bug ?????????????,???? ???????????????? ???????????????,??????????bug ------------------------------------------------------- ?? reg.bat ????????????。 ????,??????txt/u...SharePoint Column & View Permission: SharePoint Column and View Permission v1.5: Version 1.5 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerUntangler: Untangler 1.0.0: Add a missing file from first releaseDirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugHome Access Plus+: v8.1: HAP+ Web v8.1.1003.000079318 Fixed: Issue with the Help Desk and updating a ticket as an admin 79319 Fixed: formatting issue with the booking system admin header 79321 Moved to using the arrow with a circle symbol on the homepage instead of the > and < 79541 Added: 480px wide mobile theme to login page 79541 Added: 480px wide mobile theme to home page 79541 Added: slide events for homepage 79553 Fixed: Booking System Multiple Lesson Bug 79553 Fixed: IE Error Message 79684 Fixed: jQuery issue ...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...WallSwitch: WallSwitch 1.0.6: Version 1.0.6 Changes: Added hotkeys to perform a variety of operations (next/previous image, pause, clear history, etc.) Added color effects for grayscale, sepia and intense color. Various fixes.Readable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20Windows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryNew Projects3DGL: Bot de liga con comandos basicos para un pvpgn, necesita ser refactorizado y pasado en limpio pero esta totalmente funcional. Actualmente se usa OmbuServerADCMS: oneAptech.eProject.Batch59B - Online Book Store: eProject of Batch59B (SOFTECH - APTECH)AutoconsultaUB: this is a testAzure Active Directory Expense Demo Application: This application has been written to provide you with a quick and easy way to set up your first application that connects seamlessly to Azure Active DirectoryCentral: This a WPF project that implements PRISM with MEF as the IoC. This is an IDE with a modern UI where developers can run and centralize all their different apps.DataWay Connectors: ?????????? DataWay ??? ?????????? ?????????? ??? ????????? DataWay, ?????????? ?? ?????????????? ? ?????????? ??????-????????DLock - Open source distributed lock: DLock is a open source project based on .net framework that can provide the distributed lock. DoubleKeyDictionary: Project is just a single file, tests to be added as we go.Embedded Excel OLE Orphan Preventer: Prevents orphaned instances of embedded Excel workbooks from handing around even after the parent container document has been closed.File Duplicate Utility: This project will quickly detect duplicate files in a directory, then allow some minimal post processing on those duplicate files (i.e. move them to a new dir).Geoprocessing: A set of tools for processing Sea ice concentrations Google oAuth2 Service Account .NET: Google oAuth2 Service Account .NETHelperStart: NotingiDeal: C# library for connecting with iDealJCI-System: This project doesn't have a summaryLayoutting a long string: Takes a long string and splits it according a displacing enum layoutMicrosoft Dynamics CRM VB.Net SoapLogger: The VB.NET SoapLogger for VB.NET makes it easy to see what the SOAP looks like behind a Dynamics CRM 2011 call. Similiary to the C# version included in the SDKMinecraftRepository: Minecraft data repositoryModBUSLib.NET: TestMood Tracker - Decisions: A application to help you track your mood changes.Relying Party Federation Metadata Editor: This is a federation metadata editor for relying party trust applications. RPs can be created on any platform (as long as it's based on the oasis standart).Rest MVC: Personal project to play around with MVC APISharepoint 2010 Image carousel Sandboxed: This is a Image Slider Sandboxed solution web part for SharePoint 2010. Hope this helps. Cheers!Synapse - Micro Framework for: IoCC, AoP, Messages, Pipe and Filter Pattern: Micro Framework for: Inversion of Control Container, Aspect oriented Programming, Messages Pattern, Pipe and Filter Pattern.testdd10042012tfs01: b testnewgit1004201201: cWikimentation: A very simple Wiki to integrate in existing Asp.Net MVC4-Sites, implemented as an Area. Use it for a simple OnePage-Project-Documentation.Windows 8 AppBox: Este aplicativo vai ajuda-los a começar a desenvolver Aplicativos para a Windows 8 Store, comece desenvolvendo uma App simples, baseada somente em conteúdo :)Windows Phone Stateful Framework: A framework to correctly implement the Windows Phone tombstoned state.

    Read the article

  • ??Database Replay Capture????

    - by Liu Maclean(???)
    Database Replay?11g??????,??workload capture??????????????,???????? ??Workload Capture???????: ???????????????,???????2????,??????,???????????OLTP???????capture 10????1G???? ?????: ????????????????????? ??startup restrict????,?????????? ??capture???restrict?? ????????????? ???????????????: ??scn???????? ???????? ???????? Capture???????????workload????? ???????SYSDBA?SYSOPER????OS?? ????: ?TPCC???capture??????4.5% ????session????64KB??? ???Workload Capture?????????? ????????2?, ??RAC????workload capture  file??????????????,??start_capture????? ????session????64KB???,??????????????workload  capture file????Server Process??????,?????????parse???execution????,Server Process??LOGON?LOGOFF?SQL??????????PGA?,???WCR Capture PG?WCR Capture PGA?,?PGA?????????????????,Server Process???????????WCR???,?????WCR???Server Process??’WCR: capture file IO write’????? ?WCR?????????: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select name from v$event_name where name like '%WCR%'; NAME ---------------------------------------------------------------- WCR: replay client notify WCR: replay clock WCR: replay lock order WCR: replay paused WCR: RAC message context busy WCR: capture file IO write WCR: Sync context busy latch: WCR: sync latch: WCR: processes HT 11g????????WCR???LATCH 1* select name,gets from v$latch where name like '%WCR%' SQL> / NAME GETS ------------------------------ ---------- WCR: kecu cas mem 3 WCR: kecr File Count 37 WCR: MMON Create dir 1 WCR: ticker cache 0 WCR: sync 495 WCR: processes HT 0 WCR: MTS VC queue 0 7 rows selected. ????????????Database Replay Capture????? 1. ????capture dbms_workload_capture.start_capture CREATE OR REPLACE DIRECTORY dbcapture AS '/home/oracle/dbcapture'; execute dbms_workload_capture.start_capture('CAPTURE','DBCAPTURE',default_action=>'INCLUDE'); SQL> select id,name,status,start_time,end_time,connects,user_calls,dir_path from dba_workload_captures where id = (select max(id) from dba_workload_captures) ; ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 1 CAPTURE IN PROGRESS 08-DEC-12 11 ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 167 /home/oracle/dbcapture 2. ?? capture file?? [oracle@mlab2 dbcapture]$ ls -lR .: total 8 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 cap drwxr-xr-x 3 oracle oinstall 4096 Dec 8 07:24 capfiles -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:24 wcr_cap_00001.start ./cap: total 4 -rw-r--r-- 1 oracle oinstall 91 Dec 8 07:24 wcr_scapture.wmd ./capfiles: total 4 drwxr-xr-x 12 oracle oinstall 4096 Dec 8 07:24 inst1 ./capfiles/inst1: total 40 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 08:31 aa drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ab drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ac drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ad drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ae drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 af drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ag drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ah drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ai drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 aj ./capfiles/inst1/aa: total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec ./capfiles/inst1/ab: total 0 ./capfiles/inst1/ac: total 0 ./capfiles/inst1/ad: total 0 ./capfiles/inst1/ae: total 0 ./capfiles/inst1/af: total 0 ./capfiles/inst1/ag: total 0 ./capfiles/inst1/ah: total 0 ./capfiles/inst1/ai: total 0 ./capfiles/inst1/aj: total 0 [oracle@mlab2 dbcapture]$ cd ./capfiles/inst1/aa [oracle@mlab2 aa]$ ls -l total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec [oracle@mlab2 aa]$ ls -l |wc -l 14 ???????14??? 3. ??LOGON????Server Process [oracle@mlab2 ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Sat Dec 8 08:37:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ?????wcr?? [oracle@mlab2 aa]$ ls -ltr total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:37 wcr_c6hp4h0000018.rec ??????wcr_c6hp4h0000018.rec ??? SQL> select spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID ------------------------ 14293 ????????????????14293, ???????????????,??????wcr_c6hp4h0000018.rec [oracle@mlab2 ~]$ ls -l /proc/14293/fd total 0 lr-x------ 1 oracle oinstall 64 Dec 8 08:39 0 -> /dev/null l-wx------ 1 oracle oinstall 64 Dec 8 08:39 1 -> /dev/null lrwx------ 1 oracle oinstall 64 Dec 8 08:39 10 -> /u01/app/oracle/product/11201/db_1/rdbms/audit/CRMV_ora_14293_1.aud l-wx------ 1 oracle oinstall 64 Dec 8 08:39 11 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc l-wx------ 1 oracle oinstall 64 Dec 8 08:39 12 -> pipe:[34585895] l-wx------ 1 oracle oinstall 64 Dec 8 08:39 13 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trm l-wx------ 1 oracle oinstall 64 Dec 8 08:39 2 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 3 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 4 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 5 -> /u01/app/oracle/product/11201/db_1/rdbms/mesg/oraus.msb lr-x------ 1 oracle oinstall 64 Dec 8 08:39 6 -> /proc/14293/fd lr-x------ 1 oracle oinstall 64 Dec 8 08:39 7 -> /dev/zero lrwx------ 1 oracle oinstall 64 Dec 8 08:39 8 -> /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec lr-x------ 1 oracle oinstall 64 Dec 8 08:39 9 -> pipe:[34585894] ?????lsof?? [root@mlab2 ~]# lsof|grep wcr_c6hp4h0000018.rec oracle 14293 oracle 8u REG 8,1 0 17629644 /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec ????????,??Server Process????WCR REC??,?Server Process LOGON?????? 3.????SQL??: SQL> select 1 from dual; 1 ---------- 1 SQL> / 1 ---------- 1 [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec ==»????SQL????, ??????? ??????SQL???,???????????????WCR??????,LOGON???????????SQL????,????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 11.2.0.3.0 *File header info. (Shadow process='14293') D0576B5D710A34F4E043B201A8C0ECFE SYS; NLS_LANGUAGE? AMERICAN> NLS_TERRITORY? AMERICA> NLS_CURRENCY? NLS_ISO_CURRENCY? AMERICA> NLS_NUMERIC_CHARACTERS? NLS_CALENDAR? GREGORIAN> NLS_DATE_FORMAT? DD-MON-RR> NLS_DATE_LANGUAGE? AMERICAN> NLS_CHARACTERSET? AL32UTF8> NLS_SORT? BINARY> NLS_TIME_FORMAT? HH.MI.SSXFF AM> NLS_TIMESTAMP_FORMAT? DD-MON-RR HH.MI.SSXFF AM> NLS_TIME_TZ_FORMAT? HH.MI.SSXFF AM TZR> NLS_TIMESTAMP_TZ_FORMAT? DD-MON-RR HH.MI.SSXFF AM TZR> NLS_DUAL_CURRENCY? NLS_SPECIAL_CHARS? NLS_NCHAR_CHARACTERSET? UTF8> NLS_COMP? BINARY> NLS_LENGTH_SEMANTICS? BYTE> NLS_NCHAR_CONV_EXCP? FALSE (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/u01/app/oracle/product/11201/db_1/bin/oracle)(ARGV0=oracleCRMV)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=mlab2.oracle.com)(USER=oracle)))) ,[email protected] (TNS V1-V3)U tselect spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)) ` _ select 1 from dual select 1 from dual ??????????????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 9`9_^B create table vva(t1 int) `:_i :`:_iB `;_^ ;`;_^B create table vva(t1 int) `_i >`>_iB FusC `?_^ ?`?_^B FvWC _begin for i in 1..50000 loop execute immediate 'select 1 from dual where 2='||i; end loop; end; ?SERVER PROCESS LOGOFF ??????? C`E_ B k^2C ????Server Process????parse?execution???WCR??,??????????PGA?,????????????,????????,?????WCR???????????,???????? 4. ?????? SQL> oradebug setmypid Statement processed. SQL> oradebug dump processstate 10; Statement processed. SQL> oradebug tracefile_name /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc ?processstate ??????????????? WCR: capture file IO write,??Server process??WCR ?? 3: waited for 'SQL*Net message to client' driver id=0x62657100, #bytes=0x1, =0x0 wait_id=139 seq_num=140 snap_id=1 wait times: snap=0.000007 sec, exc=0.000007 sec, total=0.000007 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 0.934091 sec of elapsed time 4: waited for 'latch: shared pool' address=0x60106b20, number=0x133, tries=0x0 wait_id=138 seq_num=139 snap_id=1 wait times: snap=0.000066 sec, exc=0.000066 sec, total=0.000066 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 1.180690 sec of elapsed time 5: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=137 seq_num=138 snap_id=1 wait times: snap=0.000189 sec, exc=0.000189 sec, total=0.000189 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.122783 sec of elapsed time 6: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=136 seq_num=137 snap_id=1 wait times: snap=0.000191 sec, exc=0.000191 sec, total=0.000191 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.053132 sec of elapsed time 7: waited for 'WCR: capture file IO write' 5.??PGA???? SQL> oradebug dump heapdump 536870917; Statement processed. grep WCR /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6111e18 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6112e98 sz= 4184 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6113ef0 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6114f70 sz= 4104 recreate "WCR Capture PG " latch=(nil) Chunk 7fb1b6115f78 sz= 160 freeable "WCR Capture PGA" Chunk 7fb1b6116018 sz= 3248 freeable "WCR Capture PGA" Subheap ds=0x7fb1b6115f90 heap name= WCR Capture PG size= 82336 HEAP DUMP heap name="WCR Capture PG" desc=0x7fb1b6115f90 FIVE LARGEST SUB HEAPS for heap name="WCR Capture PG" desc=0x7fb1b6115f9 PGA???WCR Capture PG ?WCR Capture PGA?freeable or recreate??chunk,???????Server Process???OS Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 sz= 65600=» 64k ??????????64k??,???????????????64k WCR????????????:)! 6.???? ??WCR CAPTURE????????2? SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm in ('_capture_buffer_size','_wcr_control'); NAME VALUE DESCRIB -------------------- -------------------- ------------------------------------------------------------ _wcr_control 0 Oracle internal test WCR parameter used ONLY for testing! _capture_buffer_size 65536 To set the size of the PGA I/O recording buffers ??_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k _wcr_control ??WCR?????,?????? ????,??????: 1. ???WCR WORKLOAD CAPTURE???????????,??Server Process????(????)2. ???server process????WCR??3. Server Proess???LOGON?LOGOFF?SQL?????????WCR???4. Server Process????????Immediate mode,????????PGA?(WCR Capture) subheap?,??????????????(timeout?????)5. ????, Server Process????????Immediate mode,?capture????parse??execution??(?????capture???parse?????????????,parse????capture???),?????LOGON?SQL??(???????)??PGA?WCR Capture?????,???????,????????,??tpcc??????4.5%6. ????_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k7. WCR Capture?????binrary 2????,?????,????????????????WCR capture file8. WCR: capture file IO write?????Server Process??WCR??

    Read the article

  • HP ACU shows parity initialization failed (with screenshot)

    - by lbanz
    I put in a new drive due to a hard drive failure. When the rebuild got to 100%, the controller fails and I need to reboot the server to bring it online. I had to do this about three times and it eventually finished rebuilding. But I found that it says parity initialization status failed. I've left it for a few hours but it didn't seem to reinitialize. Then I ran the insight online diagnostic tools and it reported the disk that I put in reached read/write error threshold. So I'm beginning to think that the brand new disk I put in is faulty. Before I put in the disk, the parity initialization was at a finished state. Should I replace the new disk I put in? I'm very worried as I think the parity is broken. Or is there a way to kick start the initialization process?

    Read the article

  • Outlook 2010: People pane not working well

    - by Eduardo Molteni
    I really like the new People pane in Outlook 2010. Not for the "Social" features, but for finding related emails and attachments. But.. I does not work. It is totally broken. On some people does not show any mail, and only some mails in others. I've tried re-indexing and recreating the profile, not to avail. Do you know some trick to make it work? Using 32bits outlook, without Exchange, only local.

    Read the article

  • ssl_error_rx_record_too_long error on IIS - site was working, suddenly stopped

    - by JK01
    I am suddenly getting this error connecting to localhost IIS on my development machine. It has been working fine for ages, and now suddenly has this error in Firefox: Secure Connection Failed An error occurred during a connection to localhost. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) I have googled and found no clear explanation. In IE it says: Internet Explorer cannot display the webpage\ In Chrome it says: Oops! This link appears to be broken.

    Read the article

  • Proxmox VE cluster not working

    - by JJ56
    I have been using a Proxmox VE 2.0 cluster (2 servers) for months. Today, I had the "bright idea" to install a GUI on one of the servers. I used tasksel, and selected the graphical desktop environment (Gnome). When I rebooted the server, neither of the servers on the cluster could see each other (shows a red light by the server on the sidebar, no statistics). The VMs on each server are working fine, individually. pvecm status on the broken server shows cman_tool: cannot open connection to cman, is it running ?. Running it on the other server outputs a lot of lines (here: http://pastebin.com/HpQfUHTU), but I assume the important bit is expected votes:2 total votes: 1 Trying pvecm delnode (othernode) on either server outputs: cluster not ready - no quorum? Any suggestions as to how I can fix this? Thanks in advance!

    Read the article

  • The Application was unable to start correctly (0xc0000142)

    - by Guy Thomas
    System = Windows 7 64-bit Various programs, notably Regedit, won't start. Instead I get: The Application was unable to start correctly (0xc0000142). Strangly, at least to my thinking, I can launch them via Task Manager. I am also grappling with AVG errors or over-activity, e.g. reports of Broken digital Signature. I am also having problems with Excel Update KB978474 I mention these just incase anyone thinks there is a connection, rather than expecting people to solve 3 problems at once.

    Read the article

  • Stable reverse port forwarding in SSH and stale sessions

    - by Vi
    Using VPS to forward ports behind NAT: for((;;)) { ssh -R 2222:127.0.0.1:22 [email protected]; sleep 10; } When connection is broken somehow and it is reconnecting. Warning: remote port forwarding failed for listen port 2222 Linux vi-server.no-ip.org 2.6.18-92.1.13.el5.028stab059.3 #1 SMP Wed Oct 15 13:33:44 MSD 2008 i686 I type: vi@vi-server:~$ killall sshd Connection to vi-server.org closed by remote host. Connection to vi-server.org closed. Linux vi-server.no-ip.org 2.6.18-92.1.13.el5.028stab059.3 #1 SMP Wed Oct 15 13:33:44 MSD 2008 i686 vi@vi-server:~$ Now it's OK. How it's simpler to make this automatic?

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >