Search Results

Search found 18547 results on 742 pages for 'dual screen'.

Page 77/742 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Geforce(410m with CUDA) screen resolution on Ubuntu 12.04 issue

  - by Marco K

  I made a succesful installation of Ubuntu 12.04 64-bit on my Sony Vaio PCG-71811M. I have a Geforce 410M with CUDA,it seems works fine and i have already installed packages nvidia-current and nvidia-settings at version 302.17 (I think it's the latest in this moment), but my maximum screen resolution is 1366x768(and in the native display settings it's the same thing). How can I switch it to an highest resolution, like 1920x1080?

  Read the article

• orange screen with vertical stripes

  - by Skapeven

  After having installed Ubuntu without Internet conecction, I restart the PC, go to BIOS, change boot priority to internal harddrive, save and exit. Then the PC starts again but the screen gets orange with vertical stripes and stays like that. I tried both versions 64 bit and 32 bit 12.04. I can't use internet before having Ubuntu, because y have to make a network configuration(this is not allowed in the trial version before the installed version).

  Read the article

• 12.10 blue screen, desktop environnement does not load

  - by louis

  just upgraded to Ubuntu 12.10. I can't reach the desktop, it is stuck on the blue screen, the desktop environnement does not load. Can you help please? config: thinkpad T400, 6 GB of Ram, graphic card: Intel Gma 4500Mhd lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) I am not sure I have not messed up lightdm / gdm previously...

  Read the article

• Microsoft's Choice Screen Doubles Opera's Downloads

  <b>Datamation:</b> "Microsoft has only recently begun delivering its so-called "choice screen" for browser selection to consumers in Europe, but it's apparently already producing the hoped for effect, at least for one small browser maker."

  Read the article

• Where would you implement the code to make a full screen webpage [on hold]

  - by Derek Drummond

  This will be my first time creating a website from the ground up and I would like to get some insight on how to implement a full screen site as well as some problems that may arise from it. I really like the design and layout of sites like uCast and spree. Since I am using ASP.net would this be implemented in the Master page or would this be implemented in the .ASPX file for each specific page on the site?

  Read the article

• Screen going blank

  - by Deena

  When I am watching videos via VLC or watching videos in Firefox - even when I simply click DASH HOME - Screen goes blank - nothing working - I needed to restart to recover. Not sure which is causing this issue. Is it because of Graphics Card problem - Not installed any proprietary drivers. OS : Ubuntu 12.04 Graphics Card : 1 GB - [AMD/ATI] RV710 [Radeon HD 4350/4550] Could you help me on this. Regards, Deena

  Read the article

• G210M Screen brightness control issue

  - by Bapun

  I have a Sony VAIO VPCCW15FG laptop with NVIDIA G210M graphics card. I can't adjust the screen brightness! If I use the Fn shortcuts the brightness notification shows-up and there the brightness changes the level but nothing happens. I was able to adjust the brightness level in ZorinOS. But nothing happens when I changed the bright level, then brightness level changes radically with each step in the last stages.

  Read the article

• Position sprite at center of screen

  - by Wellie

  I am trying to get a sprite to position itself at the center of the screen but nothing seems to be working for me. I'm trying Viewport viewport = graphics.GraphicsDevice.Viewport; logoPosition = new Vector2((viewport.Width - towerImage.Width) / 2, (viewport.Height - towerImage.Height) / 2); and spriteBatch.Draw(towerImage, centre, null, Color.White, 0, baseOrigin, 1.0f, SpriteEffects.None, 0); This is my first time using XNA and I don't really have a clue what I'm doing.

  Read the article

• Not able to get graphs on screen with gnuplot

  - by user81194

  I have installed 12.04 along with Windows 7 and also installed gnuplot 4.6.0. When I type gnuplot on the terminal, I am getting the error message: Terminal type set to unknown. When I tried plot sin(x), the graph does not appear on the screen. However, I am able to make a postscript file. I tried set terminal 'x11', system responds with: unknown or ambiguous terminal. Please help me solve this problem.

  Read the article

• How can I fix the screen blurred while installing Ubuntu 12.10 Bate1

  - by Marslo

  I installed Ubuntu 12.10 Bate1 yesterday, but the screen blurred always shows after selecting Install Ubuntu on a Hard Disk option and before waiting for the installation interface. Click here to check the screenshot. The method of installation is by U-disk, the name of Ubuntu 12.10 is quantal-desktop-i386.iso (the download link is from Universal-USB-Installer), and Universal-USB-Installer was used to write the Ubuntu 12.10 into U-disk. PS. Ubuntu 12.04 could be installed successful on my computer!

  Read the article

• Screen configuration not saved after first reboot

  - by user20795

  PROBLEM - When installing UBUNTU Natty on my friends Laptop with a HDMI cable attached to both TV and Laptop both screens echo each other BUT when reboot has taken place nothing is displayed on the external screen. Another user has reported the same problem so far ! http://ubuntuforums.org/showthread.php?t=1764389&highlight=hdmi - Gives a clearer description of what we are both experiencing The UBUNTU/Natty install drives both screens but the first reboot does not ? Any ideas anyone

  Read the article

• Multiple Sessions with One Terminal Connection Using Screen

  <b>Begin Linux:</b> "screen is an application that can allow you to create multiple sessions with one terminal connection."

  Read the article

• Usability Problems with RDP and Dual Monitors

  - by Stung

  Hi All, When I RDP into a win2k3 machine with the dual mon settings, I've noticed that there are a couple of usability problems: 1) Dialog boxes are popped up right in the middle of both monitors making it hard to read. 2) Windows are maximized to both monitors instead of just one. 3) The task bar spans across two monitors. (This is just a matter of preference. I prefer my task bar to span across just my primary monitor) I know that Splitview is a good tool that solves all these problems, but there's a price-tag to it. To be fair, $39 for a tool like this is not too bad at all. However, before I suggest this tool to my team and manager to get the licenses for it, are there any free alternatives that will solve the 3 above problems? -Steve

  Read the article

• Extending my desktop across two monitors with Nvidia Geforce 8800 GT

  - by Vega Sera

  When I played my old computer before I got this one, I was able to use the horizontal span. (Nvidia Geforce 6200 I believe) However, with this new computer, using vista and the 8800, the horizontal span option is gone, and all I have is dual veiw, which doesn't suit my needs. I play World of Warcraft on both my monitors, using CT_Viewport to keep my character and my veiwport on a single screen, while the majority of my addons lie on my other monitor. The problem with dual view is that the WoW will only stay on my primary monitor. Horizontal span would fix this easily, but there is no option for it. Any help regarding this?

  Read the article

• Windows 7 does not recognise second display output

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• Dual Monitor difficulties (VirtualBox ubuntu host) - rdesktop sessions mirror

  - by rukus5

  I am running ubuntu 9.10 host with a Windows guest and need to extend my guest windows desktop into the second monitor (otherwise I will have to convert to a dual boot situation because this is a work furnished computer, please HELP!!) Current Situation: Windows Guest Running with VRDP enabled and successfully connecting. Guest Additions running and VBox set to 2 monitors and I see two monitors in display settings. connecting via 2 different rdesktop sessions mirrors the display. even though display settings of Guest Windows is set to extend desktop. is there a rdesktop option to signify to the VBox it is the second display? I need the second connection be the second display. any ideas?

  Read the article

• Dual HDMI input - HD Video Capture Card

  - by Shivan Raptor

  Any suggestion for HD video capture card? Here is my requirements: I need 2 HDMI input for 2 HD Camera the signal captured will be encoded with Adobe Live Encoder (does it support dual input sources? I do not require mixing of 2 sources) the encoding format will be H.264 (720p), then will be sent to Adobe Flash Media Interactive Server for LIVE broadcasting. http://www.blackmagic-design.com/products/intensity/ I found the one above online, but I am not sure about its performance, and it has only 1 HDMI input. If I plug 2 of them into my workstation, will it conflict with each other?

  Read the article

• Windows 7 does not recognise second display output [closed]

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• How to repair the boot selection on grub?

  - by Zignd

  I had installed on my computer as a dual-boot: Debian Squeeze and Windows XP, so I decided to install Windows 8 just to test and then I would remove it and install in its place Debian Wheezy as dual-boot with Windows XP, that was already installed. During the Debian Wheezy installation, I deleted the Windows 8 partition to install Debian W. on its place. The problem is, that after the installation finished I rebooted the computer and on the grub menu was written: Debian Wheezy and Windows 8 (loader) - this Windows 8 (loader) is a boot manager as grub, and after the Win8 installation I was capable of choose between Win8 and WinXP. And when I select Windows 8 (loader) it says the Windows 8 is corrupted and is not possible to boot Windows XP. So, after that, I would like to know, how can I get Windows XP on the grub menu? Because I know its there (the Windows XP), but I can not boot it from grub. Observation: I already tried update-grub, but it only finds Debian W. and Windows 8.

  Read the article

• Dual Screens with Widescreen monitors?

  - by nmuntz

  I want to build a new computer and purchase new monitor(s). At my old job I had two 20" 4:3 and I absolutely loved this setup. However, the stores in my country only seem to have widescreen monitors nowadays, and the only 4:3 LCDs i have been able to find are 17". My question is: Do widescreens suck for using them as dual monitors? Can anyone with this setup comment on their experience with having multiple widescreen monitors? Would it be better to get three 17" 4:3 LCDs instead of two widescreens? If i go with widescreens, should i go with the smallest ones i can find? Purchasing a single big widescreen monitor is not an option for me, since being able to maximize an app on a specific area of the screen is a must have for me and im not willing to use "hacky" apps for this purpose that do a crappy job. Thanks in advance for your advise.

  Read the article

• Windows Server - Dual NIC Bandwidth Pooling

  - by tsilb

  I have a Windows Server 2008 machine with dual NICs. Both are plugged into the same switch in a typical one-switch, one-gateway home network. This server is used almost exclusively for inbound connections. It hosts a web server (IIS 6), SQL server, and file server (via LAN UNC paths and mapped drives). How do I make best use of inbound bandwidth across both NICs? For example, if I connect to it by hostname and one of the interfaces has high traffic, I'd like the new connection to use the other interface.

  Read the article

• Stuck in power saving mode

  - by sazabi02

  I've got an LG monitor I tried attaching to my laptop for dual monitor goodness and it worked fine but when I tried attaching it back to the desktop it stuck in "Power Saving mode" and wouldn't go away. The CPU's starting up but nothing happens with the monitor. I try attaching it back to the laptop and it works fine again. I don't understand what could have happened. For reference, the laptop I'm using is an HP laptop with nVidia GT240M video card running on an i7 processor while the desktop runs on a Dual Core processor with an nVidia 9400GT video card. I've never had problems like these with other monitors I've attached my pc to. Anyone got any ideas?

  Read the article

• Warning message in boot.ini

  - by MA1

  Hi everyone, I have a dual boot system with Windows XP Pro and Windows 7. Following are the contents of my system's boot.ini. ;Warning: Boot.ini is used on Windows XP and earlier operating systems. ;Warning: Use BCDEDIT.exe to modify Windows Vista boot options. ; [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT I just want to know about first two warning lines, whether these two lines are always present in dual boot system when the boot process is different for installed operating systems, for example xp + vista/w7 or windows2000 + vista/w7 etc? Regards,

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• dual boot preinstalled windows 8 laptop with windows 7

  - by sarathi

  I am having a hard disk in gpt partition style and Windows 8 is pre-installed in uefi mode. While trying to dual boot using usb bootable disk(using rufus,gpt partition style,fat32),it displays "Windows is loading files", then while displaying "Starting Windows" it hangs. So, I tried to install it inside Windows using setup.exe. Everything was running fine, but when it gets self restarted again, it got stuck at "Starting Windows". When restarted in Windows 8, it showed a htm file stating that "Windows cannot be installed on a computer using battery power. If the battery runs out of power during the installation, you might lose data. To continue the installation, plug in the computer's power adapter." I am sure that power adapter is connected. I Googled a lot on this, but I didn't get solution.

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >