Search Results

Search found 12251 results on 491 pages for 'intel wireless card'.

Page 77/491 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• How to enable 801.11 n with BCM4313

  - by Jan

  I own a ASUS 1215N with the BCM4313 wireless radio. In windows I can connect to "n" wireless networks without problem however Ubuntu 11.10 can only "see" and connect to "g" networks. I have already read through How do I get my Broadcom BCM4313 working correctly? and How do I get the Broadcom BCM4313 wireless working on an Asus 1015PX?. According to them i run the correct drivers and i have blacklisted everything useless. now this link http://ubuntuforums.org/showthread.php?t=1892229 says the 11.10 drivers have a bug and the OP solves this by compling himself a new driver, but how?

  Read the article

• WiFi not working in Ubuntu 13.10 with Ralink RT3290

  - by Francisco

  I have upgraded from Ubuntu 13.04 to Ubuntu 13.10 and now my WiFi doesn't work. It takes a lot of time to connect but when connected, connection is quickly lost again. In Ubuntu 13.04 worked fine. Here are some outputs: lspci | grep Wireless 01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod | grep rt2800 rt2800pci 18966 0 rt2800lib 95449 1 rt2800pci rt2x00pci 13287 1 rt2800pci rt2x00mmio 13661 1 rt2800pci rt2x00lib 56053 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio mac80211 634661 3 rt2x00lib,rt2x00pci,rt2800lib eeprom_93cx6 13344 1 rt2800pci crc_ccitt 12707 1 rt2800lib dmesg | grep rt2800 [ 19.959959] rt2800pci 0000:01:00.0: irq 46 for MSI/MSI-X modinfo rt2800pci | grep 3290 alias: pci:v00001814d00003290sv*sd*bc*sc*i*

  Read the article

• Wifi disabled on dell Inspiron Mini 10 (1018)

  - by Manu

  My netbook cannot access the wifi network, and I cannot enable it. This is the second time this has happenned. The first time, it came back after a lot of restarts and BIOS factory resets. Ubuntu sometimes simply won't connect to any wifi networks, and other times it will say that the wireless is blocked by a hardware switch. I have tried pressing F2 and doing a BIOS reset, with no luck. sudo rfkill list all gives : 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• 12.10 x64 - RTL8188CE - Intermittent/Slow Internet Connection

  - by Nicholas Ryan Bowers

  I have to reset my internet connection often to get it to work. When it does work, it's definitely slower than when I'm on my Windows installation. My computer uses an RTL8188CE wireless card from Realtek. I'm running the 64-bit version of Ubuntu 12.10. Power management is not on. I've read on other sites that some people fixed the issue pertaining to this wireless card by downloading and installing the drivers from the Realtek site, but it seems as if that only helped people with 32-bit installations. Anyone have any luck with this specific wireless card?

  Read the article

• Intel NUC Video Blur

  - by donopj2

  I recently purchased the D34010WYKH NUC and I figured this would be a great time to make the jump to a Linux based system. I'm running Ubuntu 14.04, and I'm having an issue with video rendering that is driving me mad. Essentially videos (all 1080p mkv files) appear to be slowly blurring, and its most noticeable when the camera remains on a scene for a long period of time. Then all of a sudden the video will correct the blur and the image will be sharp, only to begin happening again followed by more sudden and noticeable corrections. I have seen the exact same issue in both VLC and XBMC and across several different videos. I have installed the latest Intel graphics drivers, and searched the web but to be honest I'm not sure how to accurately describe this problem. I'm also quite new to the OS, so my experience tinkering is limited. Has anyone experienced this type of issue before? Can it be resolved?

  Read the article

• IPSec Offload support in 82576GB controller for Linux

  - by Rodrigo Leal

  Due to migration of servers to cloud computing, we bought several NICs that support mechanisms like SRIOV and VMDQ. Furthermore, as security risk was also a concern and we did not want to create more overhead on the processor, IPSec Offload support was essential. The model chosen was: Intel Gigabit ET2 Quad Port Svr Adptr. (With 82576GB controller): http://ark.intel.com/products/49187/intel-gigabit-et2-quad-port-server-adapter However, we were unable to configure IPSec Offload on Linux. We tried to test on another server we have, a Windows Server 2012 R2, but again without success. It seems that the driver for this controller is not available for windows server 2012 R2, and Linux. The test on windows would be only for verification purposes, we will not use this platform. Could someone confirm this lack of support for Linux?

  Read the article

• Wifi not working for Ubuntu 14.04

  - by user286975

  I have installed the Ubuntu 14.04 on Dell Vostro 2520 laptop. Wifi is not working after installation. Tried several methods to install but nothing happens. Vostro-2520:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Vostro-2520:~$ iwconfig usb0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. The hardware is Broadcom 802.11 bcm43142. Please help to solve this issue.

  Read the article

• Taking advantage of an "Intel Turbo Memory" card for swap or fast bootup

  - by Brian Ballsun-Stanton

  I have an X61 thinkpad (currently running 10.10) that I purchased 3 years ago. I splurged a little and got a Turbo Memory expansion to improve my windows boots. When I installed 10.04 (and subsquently upgraded to 10.10) there was no Turbo Memory support and there's an awful lot of noise on searches. 1) Is there any support for Intel Turbo Memory in 11.04 or trivially compilable into the kernel as swap, suspend, hibernate point, or boot partition? 2) If there is, should I bother trying to use it?

  Read the article

• Acer Aspire One 722 broadcom 4313 wifi

  - by Colin Matheson

  I had an Acer Aspire One 722 with the Atheros Wifi card and it worked fine on 11.04. So we bought 200 of them for our school. However these all came with the Broadcom BCM4313 wireless card and there are issues. It is using the brcmsmac driver and they connect initially. However after a time (sometimes just a few webpages) some of them lose connection. However, they still have an IP and network-manager says they are connected, but no pages load and you can't ping anything on the LAN or internet. A disconnect/reconnect can fix it, but sometimes a restart is required. It happens frequently so is a major issue. Lots of broadcom drivers are blacklisted: bcm43xx, b43, brcm80211. Any ideas or experiences with the broadcom4313 card? Please save these computers from a Windows fate!

  Read the article

• Ubuntu 12.10 AMD/Intel Hybrid Graphics not working

  - by Marian Lux

  On Ubuntu 12.04 my Sony Vaio VPCSE with Intel® HD Graphics 3000 and AMD Radeon™ HD 6630M worked fine with the Catalyst Control Center version 12.6. Also the switching between integrated and discrete graphic card was working. In both cases, I followed this tutorial. But it is not working on Ubuntu 12.10. I tested the tutorial with the Catalyst Control Center from the Ubuntu Software Center, the version 12.8 and version 12.9. Always the same problem: After installation process I am able to boot in the login-screen. But after entering the password for my username, only the background-image appears. Unity seems not to be starting. I am only able to reach the context-menu by right clicking the mouse button. I also tried his fix, but is also does not work for me. Any ideas what to do to fix this problem?

  Read the article

• HybridGraphics vga_switcheroo switch to intel at boot

  - by Jan

  How can I do that? I have followed this https://help.ubuntu.com/community/HybridGraphics but it didn't work I'm getting the error at boot that the /sys/kernel/debug/vgaswitcheroo/switch don't exist , so the problem seems to be that the /sys/kernel/debug don't exist when the grub parameters are processed and it is created after the grub parameter processing. So far I have made an alternative method, which works. In rc.local I granted full access to my user to /sys/kernel/debug then also to /sys/kernel/debug/vgaswitcheroo/switch and then I have made a simple script to switch the graphics to intel and putted it in ~./confif/autostart. The script is executed every time I log in to gnome. It's working however it would be nice if it worked at boot, as is described at that help.ubuntu.com page. Any ideas? Thanks

  Read the article

• Mouse Cursor Freezes Randomly with Intel GMA 950

  - by Harry

  I'm using Ubuntu 10.10 its installed using Wubi, dual boot with Windows. It's fresh install. Randomly mouse cursor freezes and cant click anything on the screen. I can move mouse but cant click. "It causes when select a text something" So I'm using keyboard to to reboot system. Then it back to normal after reboot. Tried with unplugging-plugging mouse don't work. PC: Asus laptop with Intel GMA 950 graphic card. A4 tech optical mouse. Ubuntu 10.10 completely updated and upgraded. How can I get around this?

  Read the article

• Le prix Turing pour un chercheur de légende, Google et Intel applaudissent ce « Nobel de l'informati

  Un chercheur légendaire reçoit le prix Turing Google et Intel applaudissent ce "Nobel de l'informatique" remis à un employé de Microsoft Qui a inventé la métaphore du "bureau" d'un PC ? Qui a introduit le premier la notion d'interface graphique pour le dit bureau ? Qui a créé la première barre des taches ? Qui, en somme, a inventé le "prototype des ordinateurs personnels de réseau" ? Un seul et même homme : Chuck Thacker. Pour tous ses travaux précurseurs qui ont façonné ce que sont les ordinateurs d'aujourd'hui, la ACM (Association for Computing Machinery) vient de lui décerner le prestigieux Prix Turing, équivalent du Prix Nobel dans l...

  Read the article

• Broadcom BCM4313 working, but terribly slow

  - by Ataraxio Panzetta

  Hi all, I've installed ubuntu on a Asus 1015 netbook. Everything worked out of the box except for the Wireless adapter, which i had to install with the Additional Drivers application. It apparently installed fine and connects to our wireless network, but it only works at a "funny" speed range that goes from 367Bytes to a peak of 3Kb in its best moments. I know for sure the problem is neither the network nor the hardware. Network speeds are normal under windows on this laptop and in other computers with ubuntu aswell. lspci says the card is a BCM4313 model, but the Addittional Drivers Manager says these packecege contains Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322 based hardware seems like it installed the wrong driver... Is there anything I can do? I'm not concerned about compiling the driver or stuff like that, but I'm not sure on where to start... any help or guidance will be very, very appreciated.

  Read the article

• Can't get Broadcom 43142 drivers to work after installation on 5420 Inspiron

  - by beckett

  I'm a complete newbie to ubuntu, I've already installed and reinstalled the Broadcom driver required done a numerous amount of steps on terminal but I can't seem to get wireless working. However, my wired connection seems to work just fine. also I have tried to follow the instructions but get stuck at step number 2 when i get told "No package dpkg is available": 1) Download the file from the link 2) sudo yum install dpkg 3) mkdir BCM43142 4) dpkg-deb -x Downloads/wireless-bcm43142-dkms-6.20.55.19_amd64.deb BCM43142 5) cd BCM43142/usr/src/wireless-bcm43142-oneiric-dkms-6.20.55.19~bdcom0602.0400.1000.0400/src/wl/sys 6) sudo yum install kernel-devel kernel-headers 7) vi wl_linux.c 8) around line 43, remove the line include 9) save the file (:wq) 10) cd ../../.. 11) make Things should work, and you'll have a file called "wl.ko" in the current directory. 12) sudo yum remove broadcom-wl 13) sudo mkdir -p /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 14) sudo cp wl.ko /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 15) sudo depmod -a 16) sudo modprobe wl I really need help :/

  Read the article

• Lost the config of my monitor once I connected it to a KVM switch.

  - by jfmessier

  I used to have a monitor (Acer 20", AL2017) connected to the external video port of my laptop. Everything was great and I could get a rather high resolution available when setting it under Ubuntu (all versions). But since I connected it to a KVM, the monitor is no more recognized, and I cannot go beyond 1024x768. My video adapter is an Intel chipset 9xx from an older Pentium Core 2 Duo laptop. The same monitor, using another video chipset (Intel 82G33/G31 rev 02) is properly detected through the switch box. Looks to me like the video chipset is not the best, and I can live with this. I see that I have no xorg.conf, and I understand that I would need to generate one so I can then use it to force the available modes on the X system. How can I generate the xorg.conf file for my Intel video chip, so I can use it then ? Merci :-)

  Read the article

• Failed install 12.04 on Intel Hardware Raid with Large Partition (> 2TB)

  - by Michael Wiles

  I have Intel Hardware Raid on the motherboard. I have 10 2 TB HDD that I've configured as RAID 1+0 to be one big 8 TB HDD. Now I'm trying to install ubuntu 12.04 on it. After installing with default desktop installation disk I get a blank screen with a cursor flashing. If I try the alternate guided partitioning option I get error: out of disk. and the grub prompt. If I boot with the rescue disk or such like I can drop into a shell and view the disk. Everything also installs without an issue. Don't know what to do...

  Read the article

• Graphic issue on intel945 chipset

  - by peeyush tiwari

  I used Intrepid(8.10) and my graphics used to work fine with compiz effects and all(on better resolution than 1024x768).Now I have upgraded to Precise(12.04)but I use gnome classic(with compiz effects)as my desktop but the compiz effects seem not to work, only unity 2D works. When I ran lshw -c video it gives: *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fea40000-fea7ffff Sysinfo shows: Display Resolution 1024x768 pixels OpenGL Renderer Gallium 0.4 on llvmpipe(LLVM 0x300) X11 Vendor The X.Org Foundation On SystemSettings: Memory 993.3 MiB Processor Intel® Pentium(R) 4 CPU 2.40GHz Graphics VESA: Intel(r) 82945G Chipset Family Graphics OS type 32-bit glxgears output comes to be around 100fps which used to be around 900fps in Intrepid

  Read the article

• /usr/share/apport/apport-gpu-error-intel.py Error

  - by gopherballs

  I was on Ubuntu 12.10 and ran the system updates and after the re-install, the system became unstable and kept prompting me with the message "System Issue" and this as the error per Ubuntu "/usr/share/apport/apport-gpu-error-intel.py". After I tried re-starting, the issue is still appearing and the system ultimately freezes (requiring a hard reset). I tried a clean install of 12.10 and the system works fine until the newest updates are applied...it then returns to the same messages. I then tried a clean install of 12.04 LTS and just like 12.10 it works until the latest updates are applied. On 12.04, I tried to use the previous kernel - going from 3.5.0-26 to 3.5.0-23 and the issue is still there. Currently, I'm sitting on 12.04 LTS clean install without doing the updates and the system is working. Does anyone have an idea how to fix this? Thanks.

  Read the article

• How do I get my Broadcom BCM4313 working correctly?

  - by Ataraxio Panzetta

  I've installed ubuntu on a Asus 1015 netbook. Everything worked out of the box except for the Wireless adapter, which i had to install with the Additional Drivers application. It apparently installed fine and connects to our wireless network, but it only works at a "funny" speed range that goes from 367Bytes to a peak of 3Kb in its best moments. I know for sure the problem is neither the network nor the hardware. Network speeds are normal under windows on this laptop and in other computers with ubuntu aswell. lspci says the card is a BCM4313 model, but the Addittional Drivers Manager says these packecege contains Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322 based hardware seems like it installed the wrong driver... Is there anything I can do? I'm not concerned about compiling the driver or stuff like that, but I'm not sure on where to start... any help or guidance will be very, very appreciated.

  Read the article

• Low graphics mode on ubuntu 12.10 with intel 4000

  - by Amey Jah

  I recently upgraded to 12.10 (fresh install). Now I am facing wierd problem, randomly for when I boot I get a message of low graphics. For now, I switch to console using alt+f1 and then rebboot. On reboot, I select recovery mode, allow system to boot and then again reboot. Now I select normal mode and my graphics loads smoothly. Could you please tell me what could e the issue? I have Dell inspiron 5230 with Intel 4000 onboard graphics. --Amey

  Read the article

• Reading cpu temperature Intel Celeron (R) with lm-sensors

  - by tim_a

  I know there are already a lot of questions like this, but non of the answers provided there could fix my problem. I try to read out my cpu temperature with lm-sensors on my ubuntu 10.04 LTS installation but I can't get to work. I did try the command sensors-detect several times but still nothing. My computer is an old PC with an Intel Celeron (R) @ 2.60 GHz. The odd thing is that the hdd temp is shown in the applet but when I type in the terminal sensors I get the error: "No sensors found! Make sure you loaded all the kernel drivers you need." I'm not really interested in the hdd temperature but I think it is strange that these sensors do work in the applet and not in the terminal. This is the output that sensors-detect gives: http://pastebin.com/F4hVKaLU Any suggestions?

  Read the article

• Can aynone tell me what exactly 32bit/64bit and x86 and AMD64 have to do with the different choices on the download site of Ubuntu?

  - by Elysium

  SORRY for the newbie question, but I am still learning. I am wondering if x86 simply refers to the intel CPUs and AMD64 simply refers to the AMD CPUs? While....32bit and 64bit to the processor types? I was trying to download the intel 64bit version of the Ubuntu installer, but it wont give the option of x86 and AMD64....only the 32bit and 64bit can be chosen. Does this mean that someone with an Intel CPU and another person with an AMD CPU will download the same install file? (obviously depending on the bit version of their CPUs this might differ....but that's another thing).

  Read the article

• Disabled WiFi but it keeps re-enabling itself; want it to stay disabled

  - by Mike Uresti

  I have an Alienware X51 desktop with a wireless card, I have it connected via ethernet and want to permanently disable WiFi from ever using itself. When running Windows, I go to device manager and rightclick-disable the Wireless card and that takes care of my problem. Is there a similar method using Ubuntu 14.04? For now, I click on the network icon in the system tray and uncheck 'Enable wifi' but it seems to turn itself back on as I use my computer, I think I have the incident isolated to something with Steam. It seems like after I start the Steam client it always is re-enabled. Hopeful answer: Just disable/remove/block wireless card from ever working.

  Read the article

• 3.5.0-18 kernel update broke BCM43228

  - by ignition

  After updating the kernel to 3.5.0-18 the Broadcom BCM43228 wireless card of my Acer Aspire One 756 has stopped working properly. The card often refuses to connect to my AP, and if it connects it behaves very unstable. I have already reinstalled the drivers, as recommended by googling around. As far as I can tell the only driver that supports my card is the bcmwl package. I found one solution saying I should install broadcom-sta using module assistant, however I could not get this to install and apparently broadcom-sta and bcmwl are effectively the same driver? Is anyone experiencing similar issues? Is it possible to just downgrade to the previous kernel version?

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >