Search Results

Search found 12251 results on 491 pages for 'intel wireless card'.

Page 80/491 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

    - by Visitor
    I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

    Read the article

  • Ubuntu 12.04 Nvidia GTX 460 video card installation

    - by aczietlow
    Currently testing Ubuntu 12.04 x64 for our development team. After upgrading from 11.10 I've been having video card issues. I'm using Nvidia GeForce GTX 460. When ever I try to launch Nvidia X server I get the following error message. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. I've tried running sudo nvidia-xconfig multiple times and rebooting with no success. I've also tried getting the nvidia-current driver from the x-swat repo sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current Followed again by a reboot did nothing for me but knock my resolution down to 800x600 Finally I've tried sudo apt-get purge xserver-xorg sudo apt-get update sudo apt-get install xserver-xorg xserver-xorg-video-all sudo reboot Does anyone have any thoughts or directions they could point me in? To the best of my understanding my video card is suppose to be supported.

    Read the article

  • AVerMedia A309-B mini-PCI to AVerMedia A317 Mini PCI card

    - by Chris
    I got an HP pavilion hdx 16 1060ED laptop (Windows Vista) with a a DVB-T tuner card Now I would like a hybrid or analog turner card in it. According to the HP data of a more expensive variant, a AVerMedia A317 Mini PCI card installed is installed. My system has a AVerMedia A309-B mini-PCI placed in the system. my questions: 1 - is it possible to replace it with a expensive one? (AVerMedia A317 Mini PCI card) and 2 - what will this cost? 3 - I can build it myself and what can I do with the old card I like to hear from you.

    Read the article

  • RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Linux software that

    - by Deepak Narwal
    Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

    Read the article

  • RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

    - by Deepak Narwal
    Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

    Read the article

  • How to configure Windows 2008 R2 server for LAN and wireless internet connections

    - by Alchemical
    For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

    Read the article

  • Swapping 3Ware Raid Card - Best Procedure

    - by Brian Lee Jackson
    We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

    Read the article

  • some questions about raid card

    - by cpps
    I have some questions about raid card. Use LSI MegaRAID® SAS 9260-8i raid card as a example. There is only two connection ports on the raid card, and they provide two cables that can connect 8 SAS/SATA storages. The document say it can connect "Maximum 32 drives per controller", I want to know how can I connect more than 8 hard disks with this card. Is that they say "Eight internal SATA+SAS ports" means they provide two cables which can connect 8 hard drives, but you can use other way to connect Maximum 32 drives? The other question. I see host bus adapter has raid integrated , so what is the difference between host bus adapter and raid card. Are they the same? I also know is SAS/SATA Expander's function only to connect more hard drives? Thanks in advance.

    Read the article

  • DIsable my nv video card driver in linux

    - by Dahaka Wang
    I'm trying to passthrough my nv video card to my domU, but I could not bind my video card to the pciback driver I only have one video card with the pci number 0000:03:00.0, so I used the following command echo -n "0000:03:00.0" > /sys/bus/pci/drivers/nouveau/bind to unbind the nouveau driver from my video card. The screen went black because I have forcefully removed the video driver, therefore I ssh'd into the computer to run further commands I ran: echo -n "0000:03:00.0" > /sys/bus/pci/drivers/pciback/bind to try to bind it to my pciback driver, but I got: bash: echo: write error: No such device I found out that this was the message shown when trying to bind a PCI device which is already bound. Therefore, I think that something was still using my video card Can anyone help me out? Thanks a lot!

    Read the article

  • kubuntu 12.10 will not boot on mac 2.93Ghz intel core 2 duo

    - by Jake Sweet
    I feel like I've tried it all and nothing is changing. I've tried booting from a liveUSB, a liveDVD, and I've checked the mod5 everything matches up. I've even tried different distro's same result on all of them. Just for reference: linuxmint 13kde and Fedora 17. I've also tried changing my liveUSB building software just in case. I've tried unetbootin and Linux USB builder. Both have same results, my opinion is that it is a hardware issue since I'm having near the same result with all of these variables. So now what is actually happening? I can boot up to a screen. I say A screen because some of the ways that dvd's and usb's boot differs. Now on liveusb I'm reaching a black screen with white text. Says booting: done, then below says loading ramdrive: done, then below that it says preparing to boot kernel this may take a while and buckle in or something to that effect. Then nothing. That's it computer freezes. I've waited up to 8 hrs and still nothing. Ok for the liveDVD Everything goes according to instructions per pdf files on every distro, until linux starts. I can only run in compatibility mode. When any other option is tried the computer seems to freeze/stall/be a pain in my butt... Ok well that seems to wrap it up. Also if I'm not explaining something well, I'm sorry I can try to clear anything up. I'm not the best at descriptions. I'm leaving with a tech specs of my mac: 2.93GHz Intel Core 2 Duo, 4 GB ram, NVIDIA GeForce GT 120 graphics, bought in late 09" it's the 24" model, let me know if anymore information will help. Also thanks in advance

    Read the article

  • Intel 82576 Network card

    - by No1_Melman
    I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

    Read the article

  • intel atom getting too hot

    - by user59565
    I own an Asus 1215N which is getting very hot Intel Atom 525D dual core ION 2 (geforce 220 + GMA 3150) 4 GB RAM Ubuntu 12.04 it hits 86 C at idle. Some times (at load or turned on 1 hour) it shuts down due to heat, in Windows 7 it runs idle at 49 C. I tried an acpi call to shut down the nVidia chip which is cooled together with the Atom chip. That didn't solve the problem. To check up to see if it really turned off I checked how much power the laptop consumed, it only went from using 1400 mW to 860 mW, no changes in heat. I also tried reapply the standard heat adhesive, the old heat adhesive made it run at 97 (it couldn't even put up a useful install of Ubuntu). This really annoys me, as Ubuntu is the OS of choice to me. Should I try compile the kernel? Is it true that compile for a P4 is the better choice to the atom, when compiling the kernel for this processor architecture? Now I tried compiling the kernel for atom. Now temperature is 83 C (think the drop has more to do with ambient temp than the customized kernel) help appreciated

    Read the article

  • Dedicated Hosting offering Intel Core 2 Quad @ 6GHz. Is this real?

    - by Daniel Magliola
    Hi, sorry if this is a very dumb question, but... I just got an offer from a dedicated hosting company, offering me a box with "2 Core 2 Quad processors @ 6GHz" I didn't know we could get 6GHz, and some googling turned out a bunch of people getting that, after overclocking like crazy, which seems to confirm my suspicion. Are there hostings offering 6GHz CPUs, or are these people outright lying to me? Thank you!

    Read the article

  • iPhone Developer account with someone elses credit card

    - by HappYCrappY
    Hi I wanted to enroll in Apples iPhone developer program the problem is I myself don't own a credit card is it Ok if I use some one else's credit card to sign up... I mean will Apple pay the guy whose credit card I have used or can I specify my Account details for any future transactions & just use this credit card for paying Apple. (& yes I cannot get a credit card, I am currently jobless never ever had a credit card before in my life & credit card companies are very skeptical to give me one.) Thank you

    Read the article

  • Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

    - by Kieron
    System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

    Read the article

  • How to make ad-hoc network connection?

    - by Johan Nathaniel Soedjono
    I can't make ad-hoc from my netbook (Ubuntu 12.04). It has internet source from ethernet. I have tried making from network manager. But it always says 'Wireless Network Disconnected' and can't be detected by neither my other laptop nor my cell phone which have wifi. How can I make adhoc from it? I have already tried making a connection in Network Manager a lot of times, but it still can't connect and appear notification 'Wireless Network Disconnected'.

    Read the article

  • Ralink-based USB Wi-Fi adapter drops connection after some time

    - by Hector Aguilar
    I have an Intellinet Wireless 150N USB adapter (based on a Ralink rt3070 chip) in an Ubuntu 10.10 installation. The problem is, that it's dropping the connection after being connected to a wireless network for 10 - 20 minutes. I have to unplug it and plug it in again every time this happens. I read somewhere, that I need to blacklist some chipset modules, but I don't how? And which ralink modules I have to blacklist? Thanks for your answers! :D

    Read the article

  • How to get D-Link DWA-547 working on Ubuntu 13.10?

    - by Tan Kah Ping
    I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

    Read the article

  • Lenovo ThinkCentre DisplayPort not working

    - by user170736
    I installed Xubuntu 13.04, Zorin 7, and finally Ubuntu 13.04 on a Lenovo M58. The BIOS works fine on my DisplayPort monitor but Ubuntu will only work on the SVGA. The graphics are on-board: Intel Q45/Q43 x86/MMX/SSE2 I installed and ran the new Intel Driver Manager. It seemed to complete all tasks without any errors, but the DisplayPort still only works for the BIOS. Any help would be greatly appreciated

    Read the article

  • Screen corruption with 946G / 82945G/GZ [closed]

    - by Ferdinandhi
    Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks the GUI as you see in the image and the entire computer is very slow. I'm running Ubuntu 11.04 and have a Intel graphics card 945G x86/MMX/SSE2. I used Unity and Gnome 3 with the same results. lspci returns 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

    Read the article

  • Create an ad-hoc connection that looks like a wifi connection from a router

    - by James
    I have a Vizio tablet (running a modified version of Android 2.3.2) which, for some reason or another, refuses to list Windows ad-hoc wifi connections on it's wifi connection screen. It can connect to wifi networks served from a normal router, but the wireless bit of my home router is broken, so I'd like to share the internet connection through my laptop's wifi card until the new router arrives. Is it possible to create an ad-hoc network in Ubuntu that looks like a normal wireless network to my tablet?

    Read the article

  • Can't enable wifi on vaio CW ubuntu 12.04

    - by rastemoh
    I was using my wifi with no problem, but an hour ago I switched it off from system settings and then tried to turn it on again, but no success. it's about 1 month I am using it and I had no problem with WIFI except this one. I rebooted and went to windows 7, but even that OS can't turn it on!! this is rfkill list all: 0: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • Screen corruption with 946G / 82945G/GZ

    - by Ferdinandhi
    Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks1 the GUI as you see in the ![image and the entire computer is very slow: I'm running Ubuntu 11.04 and Intel graphics card 945G x86/MMX/SSE2 I used Unity and Gnome 3 with the same results. lspci--- 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >