Search Results

Search found 6636 results on 266 pages for 'jdbc driver'.

Page 77/266 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Using Xbox 360 controller with Mac OS X (specifically turning it off)

  - by Bob King

  So I've been using this driver for a few months with the Xbox 360 Wireless Controller For Windows with my Mac Mini. Here's an article about the driver on Gizmodo. The driver works really well for actually using the controller, but there doesn't seem to be a way to power off the controller without pulling the batteries. Does anyone know of a replacement driver that includes power-off capabilities, or know of some other undocumented way to turn the controller off? Note: I've been having problems getting to the site, but it could be our corporate filtering.

  Read the article

• Is it possible to download minimal drivers on Windows, without the extra software packages?

  - by Anton Gogolev

  The situation in all its glory: 30 megs for ATIs' "Display Driver Only". Almost 100 megs for NVidias' GeForce/Ion bloatware. 300 megs for an HP printer driver with immense amount of crap 30 megs for a Realtek integrated sound card driver. 50 megs for a mouse driver ...and dozens and dozens of other similar examples Additinally, UI/UX on vendors' sites is really terrible: I have to carefully pick and choose the exact model of my whatever, although this packages do contain drivers for pretty much every possible hardware model out there. My question is: How and where can I download true minimal drivers without all these ATI "Installation Managers", Realtek GUIs, ASUS tools, etc.?

  Read the article

• Mac Mini 1.66 no sound on Windows 7

  - by Steph

  I've tried everything I could to get the sound working. I've tried to install the drivers from the Snow Leopard disk, then I went and got the latest RealTek drivers from the RealTek website. Then I read that old Mac mini's could have an integrated Cirrus chip, and I tried to grab the latest driver from the website, and it appeared to install, but nothing. There's also nothing listed under Sound and ... in the Device Manager. I've tried to manually include a legacy driver, which worked for RealTek but not for the Cirrus driver. Of course it said there was no RealTek hardware install, which makes me think it's a Cirrus chip. Any further suggestions or thoughts would be really appreciated. This is a Mac Mini 1.66. I'm also not sure how to be able to detect what card is integrated into the system, so that would be helpful too (remembering that there's no driver installed). Even just to get the chip type would be great to confirm.

  Read the article

• asus eee pc 1018p os installation

  - by cornerback84

  My friend has an asus eee pc 1018p. It has no cd/dvd drive (neither do he have a usb cd/dvd drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But midway to installation it was interrupted and the computer was restarted (not h/w or s/w issue but we did it). Now we cannot run the backup and we also tried to install windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs usb device driver to continue. It has USB 3.0 maybe thats why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't runs and when booting from USB it says that it needs device driver. Anyone has any idea what we should do?

  Read the article

• Using Sigmatel STAC 92XX on Windows 7 RTM x64, cannot get 5.1 surround sound to work

  - by Roy Rico

  I have a Dell XPS 420. I've installed Windows 7 RTM (x64) I have this audio device: SIGMATEL STAC 92XX C-Major HD Audio I have tried using the windows 7 basic driver, and also the Vista 64-bit driver from Dell's website (details): Date: 10/29/2007 Version: 6.10.0.5511, A04 File Size: 7 MB With both drivers, I get normal stereo sound from the driver, but my 5.1 surround sound doesn't work. Has anyone experienced this? Is there a fix?

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• add printer on windows 7 with vbscript and wmi

  - by Jessica

  I have a problem where I can't add a printer on my Windows 7 machine, because it fails with "The printer driver is unknown" (error code 1797) using WMI/VBScript. The thing is that the printer driver already exists on the PC. I've used AddPrinterConnection to connect to the remote printer queue, and the drivers get installed. I've confirmed they exist by a) Enumerating Win32_PrinterDriver with WBEMTEST utility which shows the driver, and also in the Printer Management MMC snap-in. Is there some other scriptable way I can get this to work? I'm adding a local TCP/IP port, pointing my new printer object instance to use that port and the driver from using AddPrinterConnection, and giving it a name, but it refuses to work...

  Read the article

• drive not showing in Windows setup

  - by Binu V

  Hi, I accidentally formatted my OEM drive of M DELL Inspiron. After that I could not install Windows 7 on my laptop. Because the partitions of my hard disk are not showing to select an install drive. I downloaded the RAID driver from the Dell Support website for my laptop, but the driver is showing and I loaded the driver from a pen drive. But it's still not showing the drives.

  Read the article

• Why doesn't my sound card start? It reports code 10.

  - by Sarim Ali

  When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

  Read the article

• Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

  - by Weston C

  I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

  Read the article

• Elantech touchpad: Right + Left click doesn't work

  - by Robert Kilar

  This is very common problem and till yet unresolved. The Elantech driver disables right button + left button touchpad click. In the result you cannot aim and shoot in games also you cannot code that kind of interaction in your applications. Driver detects LMB+RMB click but it somehow filters it. I could not find correct entry in the registry to disable that obviously horrible setting. Please notice: 1. I have the latest drivers the problem existed with really old ones, a year old, on Windows 7, 8 and 8.1 ones and current. 2. It has nothing to do with the Windows or hardware but only with the Elantech driver settings. 3. Driver detects LMB+RMB click - it is shown on a dynamic icon on a task bar also uninstalling drivers fix the problem, but then you can't use your touchpad fully.

  Read the article

• Diagnosing a BSOD involving USB

  - by David Ebbo

  [Running Win7 Ultimate 64 bit] My new HP Pavilion Elite HPE-450t has been plagued by BSDO crashes since I got it about 5 weeks ago. The crashes are somewhat rare, sometimes not occurring for 3 or 4 days. I have spent a lot of time trying to isolate the device that could be at fault, but I have seen crashes with only the keyboard and mouse plugged in (as USB devices), and I tried two sets of keyboard/mouse, so I'm running out of ideas. :( The WhoCrashed tool gave this info about my latest BSOD: crash dump file: C:\Windows\Minidump\121310-11887-01.dmp This was probably caused by the following module: usbport.sys (USBPORT+0x2DE4E) Bugcheck code: 0xFE (0x5, 0xFFFFFA8008F571A0, 0x80863B34, 0xFFFFFA80092F2510) Error: BUGCODE_USB_DRIVER file path: C:\Windows\system32\drivers\usbport.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB 1.1 & 2.0 Port Driver Bug check description: This indicates that an error has occurred in a Universal Serial Bus (USB) driver. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. I looked at http://msdn.microsoft.com/en-us/library/ff560407(VS.85).aspx, and for Parameter1 = 0x5, it says "A hardware failure has occurred due to a bad physical address found in a hardware data structure. This is not due to a driver bug". Should I conclude that it's a hardware issue in the machine itself, rather than a bad USB driver or USB device? Here is the MiniDump, in case someone can get more info out of it: http://ewt52q.blu.livefilestore.com/y1peS4Ce8nSK1SXghzMDoxDWXlaEu-EKCJsv25y8y5DXXIUzZ9U0_tYgFJXd939fykwa0zRmx98IW0PYG18GioqKAuARYjtspSA/121310-11887-01.dmp?download&psid=2

  Read the article

• Problems with synaptic touchpad

  - by penlite

  The "enhanced" features of the synaptics touchpad (ie scroll, pinch zoom) on my windows 7 64 bit dell studio 17 only work intermittently. This was an issue with the original OEM driver and also with the new driver from synaptics - please do not suggest that i update, reinstall, install as administrator, check or jiggle the driver - if i hear that one more time i will freak out. I have researched this for days and appears to be a common problem without a solution (many suggestions to update the driver though -argh). Dell and synaptics have not been helpful. I have checked that syntpehn.exe and syntphelper.exe are running (sometimes the UAC seems to block syntpehn.exe from running at startup). When the touchpad fails i can still use it to control the pointer and access the synaptics settings although some of the options are disabled (greyed out or simply unresponsive). It is the only pointing device i have installed - i had a logitech trackball attached but have uninstalled all software and drivers (including hidden devices) as per synaptic. It is also the only device using IRQ 12. Any help would be greatly appreciated except "update the driver".

  Read the article

• Asus EeePC X101CH Touchpad issue

  - by ssvarc

  I have an Asus EeePC X101CH that the touchpad was uninstalled from (I saw the uninstall dialog boxes open). After a restart there was a PS/2 mouse under View Hidden Devices in Device Manager that wasn't installed properly (I'm assuming that this is the touchpad). Going to the Asus website and downloading the drivers (V15.3.27.1), I get the error message "Synaptics device not found!". I tried the other driver Version v9.1.7.7 for the Sentelic TouchPad as well (when run it appears to be the driver for the finger sensing) and got the error message "This driver version is inapplicable for the touch pad. Please check the devices on the system and install the suitable driver.". What's my next step? Thanks!

  Read the article

• Hardware doesn't work some times

  - by Ali

  I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

  Read the article

• What's the difference between these Intel things?

  - by Coldblackice

  My head still spins with the various Intel "things" that may (or may not) need installing/configuring/yaddayadda'ing: Intel Rapid Storage Technology (is this driver? a software manager/package?), Intel Chipset (i.e., Intel INF Update Utility, Intel RST OROM, Intel RST driver, Intel Matrix Manager, etc. I think I have a basic understanding that the OROM is the low-level BIOS "driver", which communicates with the higher-level RST driver (in Windows). But what's the Chipset Installation software? What's the INF installation/update software? I'm confused as to what the other pieces are (or why there are so many to begin with). And as for a practical matter -- I'm wanting to upgrade my BIOS with a recent Intel OROM included, and then also update the Intel RST drivers in Windows -- BUT, as for the Windows side of things, I don't know what I should uninstall -- the Intel Chipset installer thing (through official uninstaller), Intel RST Manager, finding the individual Intel devices in Device Manager and right-clicking-uninstall/deleting, etc.

  Read the article

• OpenGL support no longer available

  - by Aznfin

  I've been using OpenGL hardware acceleration in programs such as Adobe Photoshop CS4 and Adobe After Effects CS4. I've noticed that recently the options for OpenGL previews are disabled because my graphics card seems to not support OpenGL. But that doesn't make any sense whatsoever. I know for a fact that my graphics card does have support for OpenGL and it worked before. I checked for driver updates just the other day. Anybody know what's going on? Info: Operating System: Windows 7 Home Premium 64-bit GPU: ATI Radeon HD 3200 Driver Packaging Version: 8.69-091211a-094296C-ATI Catalyst™ Version: 09.12 Provider: ATI Technologies Inc. 2D Driver Version: 8.01.01.994 2D Driver File Path: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS /{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version: 8.14.10.0723 OpenGL Version: 6.14.10.9252 Catalyst™ Control Center Version: 2009.1211.1547.28237

  Read the article

• php_ibm_db2.dll on IIS 7.5 using PHP 5.3 error message

  - by grmbl

  I'm trying to use ibm_db2 extension to access iSeries DB2 database. This is the testcode (taken from here) <?php $database = 'ALI452BFAL'; //library $user = 'STN452'; $password = '**********'; $hostname = 'myserverip'; $port = 50000; $conn_string = "DRIVER={IBM DB2 ODBC DRIVER};DATABASE=$database;" . "HOSTNAME=$hostname;PORT=$port;PROTOCOL=TCPIP;UID=$user;PWD=$password;"; $conn = db2_connect($conn_string, '', ''); if ($conn) { print "ok"; db2_close($conn); } else { echo db2_conn_error() . '<br>' . db2_conn_errormsg(); } ?> I have installed a very basic package containing the db2 driver and added this as an extension. (IBM Data Server Driver for ODBC, CLI, and .NET.msi) This is my result: 08001 [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected: "10.10.0.120". Communication function detecting the error: "connect". Protocol specific error code(s): "10061", "", "". SQLSTATE=08001 SQLCODE=-30081 Anybody tried this before??

  Read the article

• Why is my connection slow?

  - by Jay R.

  I have a Dell Precision T5400 with a Broadcom 1Gb onboard NIC. For some strange reason, when I access machines on our local network, the best I can get is around 125KB/s download speed. My laptop that has a 10/100Mb NIC onboard usually gets around 300KB/s or better from the same network resource. Both machines are plugged into the same 1Gb switch which connects to our local network wall jack at 100Mb half duplex. There is also a printer plugged into the same switch at 100Mb full. The resource I'm using for the test is a 30MB zip file copied from a jetty webserver that is running as part of a cruisecontrol installation. The cruisecontrol installation is running WindowsXP with full real-time antivirus and Altiris patch management and inventory running. That stuff on its own is eating some of the download speed. I've seen the laptop reach into the multiple MB/s download speed before, but the desktop never seems to get past 125KB/s to 130KB/s. In WindowsXP, before I upgraded the driver in the desktop, it was that slow. In Fedora, it is still slow even though it appears to be using the same driver version as the upgraded Windows driver. The upgraded Windows driver is faster, but still not nearly as fast as the laptop. What gives? Any insight to improve the situation would be appreciated. Could it be that the BroadCom board just isn't that good, or the driver in linux is just not as good as the Windows one?

  Read the article

• USB-Sticks and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

• Backup drivers for a device in Windows 7

  - by Moses

  If I can't find a driver on the internet when I prep for a reinstall of Windows 7, I figure if the driver is already installed, why not back it up and reinstall later? The only method I know of is going through Device Manager Device Properties Driver Details. This gives me a nice list of all the files, but then I need to go manually retrieve all of them. For devices with a lot of driver files, this is inefficient. Is there a better way to accomplish this?

  Read the article

• Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

  - by d4ryl3

  I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

  Read the article

• Reliable procedure/tool for removing print drivers in Windows 7 (domain environment)

  - by ultrasawblade

  One of the troubleshooting steps in resolving printer-related issues with any version of Windows is to remove installed print drivers and then reinstall the drivers. This is a domain environment and drivers are pulled from a print server. I've had occasion to need to do this on a user's system running Windows 7 Enterprise 64-bit. These procedures don't work: Removing the printer from Devices and Printers (doesn't remove driver obviously) Doing the above, going into Server Properties, and attempting to remove the driver (fails with a "driver in use" error) Opening an empty mmc, adding the Print Management snap-in, and attempting to do the above. Doing sc stop spooler and sc start spooler before doing both of the above Now I know it's possible to remove drivers with the spooler service stopped and then going into the spool directory, as well as deleting registry entries. I'm asking if a tool exists to do this where I can just select the driver in question and it be removed.

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >