max pollack - Page 77 - Developer IT

JBoss database connection pool configuration

- by Qben

I am facing an connection pool issue in my clustered JBoss installation. From time to time one of my connection pools will hit the roof and I get a lot of these in my logfile. java.sql.SQLException: No ManagedConnections available within configured blocking timeout ( 30000 [ms] ); The odd thing is that I can see in the JMX console that the ConnectionCount hit the roof, but at the same time InUseConnectionCount is often quite small. The problem will resolve itself after a couple of minutes but during recovery phase my application will not work (for obvious reasons). The question is if this indicate an error in the configured timeouts of the connections (I pretty much use defaults), or if my pool is simply too small to handle the peaks. Under normal operation I would say I use ~40% of the configured max number of connections. The reason I just don't increase the max number of connection is that if I actually used up all connections I suspect that InUseConnectionCount would hit the roof. Hence I suspect I might have more issues than just a too small pool size. Maybe InUseConnectionCount has decreased at the time I check jmx-console and it actually do hit the roof? I tend to collect data every second minute. Any hints are more than welcome.

Read the article

Nginx Removes the index.php from URL

- by codeHead

I have a codeigniter php application on nginx. It works as expected on Apache but after moving to nginx, I noticed that the index.php is automatically removed from the URL in all my links. Infact when I try using index.php it does not go to the desired URL but gets redirected to my default controller. below is a coopy of my nginx.conf file. server{ listen 80; server_name mydomainname.com; root /var/www/domain/current; # index index.php; error_log /var/log/nginx/error.log; access_log /var/log/nginx/access.log main; location / { # Check if a file or directory index file exists, else route it to index.php. try_files $uri $uri/ /index.php ; } location ~* \.php { fastcgi_pass backend; include fastcgi.conf; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_read_timeout 500; #fastcgi_param SCRIPT_FILENAME $document_root/index.php; add_header Expires "Thu, 01 Jan 1970 00:00:01 GMT"; add_header Cache-Control "no-cache, no-store, private, proxy-revalidate, must-revalidate, post-check=0, pre-check=0"; add_header Pragma no-cache; add_header X-Served-By $hostname; } location ~* ^.+\.(css|js)$ { expires 7d; add_header Pragma public; add_header Cache-Control "public"; } # set expiration of assets to MAX for caching location ~* \.(ico|gif|jpe?g|png)(\?[0-9]+)?$ { expires max; log_not_found on; } } I need to use my URL With the index.php -- please help.

Read the article

Using a mounted NTFS share with nginx

- by Hoff

I have set up a local testing VM with Ubuntu Server 12.04 LTS and the LEMP stack. It's kind of an unconventional setup because instead of having all my PHP scripts on the local machine, I've mounted an NTFS share as the document root because I do my development on Windows. I had everything working perfectly up until this morning, now I keep getting a dreaded 'File not found.' error. I am almost certain this must be somehow permission related, because if I copy my site over to /var/www, nginx and php-fpm have no problems serving my PHP scripts. What I can't figure out is why all of a sudden (after a reboot of the server), no PHP files will be served but instead just the 'File not found.' error. Static files work fine, so I think it's PHP that is causing the headache. Both nginx and php-fpm are configured to run as the user www-data: root@ubuntu-server:~# ps aux | grep 'nginx\|php-fpm' root 1095 0.0 0.0 5816 792 ? Ss 11:11 0:00 nginx: master process /opt/nginx/sbin/nginx -c /etc/nginx/nginx.conf www-data 1096 0.0 0.1 6016 1172 ? S 11:11 0:00 nginx: worker process www-data 1098 0.0 0.1 6016 1172 ? S 11:11 0:00 nginx: worker process root 1130 0.0 0.4 175560 4212 ? Ss 11:11 0:00 php-fpm: master process (/etc/php5/php-fpm.conf) www-data 1131 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www www-data 1132 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www www-data 1133 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www root 1686 0.0 0.0 4368 816 pts/1 S+ 11:11 0:00 grep --color=auto nginx\|php-fpm I have mounted the NTFS share at /mnt/webfiles by editing /etc/fstab and adding the following line: //192.168.0.199/c$/Websites/ /mnt/webfiles cifs username=Jordan,password=mypasswordhere,gid=33,uid=33 0 0 Where gid 33 is the www-data group and uid 33 is the user www-data. If I list the contents of one of my sites you can in fact see that they belong to the user www-data: root@ubuntu-server:~# ls -l /mnt/webfiles/nTv5-2.0 total 8 drwxr-xr-x 0 www-data www-data 0 Jun 6 19:12 app drwxr-xr-x 0 www-data www-data 0 Aug 22 19:00 assets -rwxr-xr-x 0 www-data www-data 1150 Jan 4 2012 favicon.ico -rwxr-xr-x 0 www-data www-data 1412 Dec 28 2011 index.php drwxr-xr-x 0 www-data www-data 0 Jun 3 16:44 lib drwxr-xr-x 0 www-data www-data 0 Jan 3 2012 plugins drwxr-xr-x 0 www-data www-data 0 Jun 3 16:45 vendors If I switch to the www-data user, I have no problem creating a new file on the share: root@ubuntu-server:~# su www-data $ > /mnt/webfiles/test.txt $ ls -l /mnt/webfiles | grep test\.txt -rwxr-xr-x 0 www-data www-data 0 Sep 8 11:19 test.txt There should be no problem reading or writing to the share with php-fpm running as the user www-data. When I examine the error log of nginx, it's filled with a bunch of lines that look like the following: 2012/09/08 11:22:36 [error] 1096#0: *1 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 192.168.0.199, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.123" 2012/09/08 11:22:39 [error] 1096#0: *1 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 192.168.0.199, server: , request: "GET /apc.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.123" It's bizarre that this was working previously and now all of sudden PHP is complaining that it can't "find" the scripts on the share. Does anybody know why this is happening? EDIT I tried editing php-fpm.conf and changing chdir to the following: chdir = /mnt/webfiles When I try and restart the php-fpm service, I get the error: Starting php-fpm [08-Sep-2012 14:20:55] ERROR: [pool www] the chdir path '/mnt/webfiles' does not exist or is not a directory This is a total load of bullshit because this directory DOES exist and is mounted! Any ls commands to list that directory work perfectly. Why the hell can't PHP-FPM see this directory?! Here are my configuration files for reference: nginx.conf user www-data; worker_processes 2; error_log /var/log/nginx/nginx.log info; pid /var/run/nginx.pid; events { worker_connections 1024; multi_accept on; } http { include fastcgi.conf; include mime.types; default_type application/octet-stream; set_real_ip_from 127.0.0.1; real_ip_header X-Forwarded-For; ## Proxy proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 32m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; ## Compression gzip on; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; ### TCP options tcp_nodelay on; tcp_nopush on; keepalive_timeout 65; sendfile on; include /etc/nginx/sites-enabled/*; } my site config server { listen 80; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log; root /mnt/webfiles/nTv5-2.0/app/webroot; index index.php; ## Block bad bots if ($http_user_agent ~* (HTTrack|HTMLParser|libcurl|discobot|Exabot|Casper|kmccrew|plaNETWORK|RPT-HTTPClient)) { return 444; } ## Block certain Referers (case insensitive) if ($http_referer ~* (sex|vigra|viagra) ) { return 444; } ## Deny dot files: location ~ /\. { deny all; } ## Favicon Not Found location = /favicon.ico { access_log off; log_not_found off; } ## Robots.txt Not Found location = /robots.txt { access_log off; log_not_found off; } if (-f $document_root/maintenance.html) { rewrite ^(.*)$ /maintenance.html last; } location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "max-age=2678400, public, must-revalidate"; } location / { try_files $uri $uri/ index.php; if (-f $request_filename) { break; } rewrite ^(.+)$ /index.php?url=$1 last; } location ~ \.php$ { include /etc/nginx/fastcgi.conf; fastcgi_pass unix:/var/run/php5-fpm.sock; } } php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix (/opt/php5). This prefix can be dynamicaly changed by using the ; '-p' argument from the command line. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p arguement) ; - /opt/php5 otherwise ;include=etc/fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Note: the default prefix is /opt/php5/var ; Default Value: none pid = /var/run/php-fpm.pid ; Error log file ; Note: the default prefix is /opt/php5/var ; Default Value: log/php-fpm.log error_log = /var/log/php5-fpm/php-fpm.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; Multiple pools of child processes may be started with different listening ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) ; Start a new pool named 'www'. ; the variable $pool can we used in any directive and will be replaced by the ; pool name ('www' here) [www] ; Per pool prefix ; It only applies on the following directives: ; - 'slowlog' ; - 'listen' (unixsocket) ; - 'chroot' ; - 'chdir' ; - 'php_values' ; - 'php_admin_values' ; When not set, the global prefix (or /opt/php5) applies instead. ; Note: This directive can also be relative to the global prefix. ; Default Value: none ;prefix = /path/to/pools/$pool ; The address on which to accept FastCGI requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on ; a specific port; ; 'port' - to listen on a TCP socket to all addresses on a ; specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. ;listen = 127.0.0.1:9000 listen = /var/run/php5-fpm.sock ; Set listen(2) backlog. A value of '-1' means unlimited. ; Default Value: 128 (-1 on FreeBSD and OpenBSD) ;listen.backlog = -1 ; List of ipv4 addresses of FastCGI clients which are allowed to connect. ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address ; must be separated by a comma. If this value is left blank, connections will be ; accepted from any ip address. ; Default Value: any ;listen.allowed_clients = 127.0.0.1 ; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many ; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0666 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 ; Unix user/group of processes ; Note: The user is mandatory. If the group is not set, the default user's group ; will be used. user = www-data group = www-data ; Choose how the process manager will control the number of child processes. ; Possible Values: ; static - a fixed number (pm.max_children) of child processes; ; dynamic - the number of child processes are set dynamically based on the ; following directives: ; pm.max_children - the maximum number of children that can ; be alive at the same time. ; pm.start_servers - the number of children created on startup. ; pm.min_spare_servers - the minimum number of children in 'idle' ; state (waiting to process). If the number ; of 'idle' processes is less than this ; number then some children will be created. ; pm.max_spare_servers - the maximum number of children in 'idle' ; state (waiting to process). If the number ; of 'idle' processes is greater than this ; number then some children will be killed. ; Note: This value is mandatory. pm = dynamic ; The number of child processes to be created when pm is set to 'static' and the ; maximum number of child processes to be created when pm is set to 'dynamic'. ; This value sets the limit on the number of simultaneous requests that will be ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP ; CGI. ; Note: Used when pm is set to either 'static' or 'dynamic' ; Note: This value is mandatory. pm.max_children = 50 ; The number of child processes created on startup. ; Note: Used only when pm is set to 'dynamic' ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 pm.start_servers = 20 ; The desired minimum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.min_spare_servers = 5 ; The desired maximum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.max_spare_servers = 35 ; The number of requests each child process should execute before respawning. ; This can be useful to work around memory leaks in 3rd party libraries. For ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. ; Default Value: 0 pm.max_requests = 500 ; The URI to view the FPM status page. If this value is not set, no URI will be ; recognized as a status page. By default, the status page shows the following ; information: ; accepted conn - the number of request accepted by the pool; ; pool - the name of the pool; ; process manager - static or dynamic; ; idle processes - the number of idle processes; ; active processes - the number of active processes; ; total processes - the number of idle + active processes. ; max children reached - number of times, the process limit has been reached, ; when pm tries to start more children (works only for ; pm 'dynamic') ; The values of 'idle processes', 'active processes' and 'total processes' are ; updated each second. The value of 'accepted conn' is updated in real time. ; Example output: ; accepted conn: 12073 ; pool: www ; process manager: static ; idle processes: 35 ; active processes: 65 ; total processes: 100 ; max children reached: 1 ; By default the status page output is formatted as text/plain. Passing either ; 'html' or 'json' as a query string will return the corresponding output ; syntax. Example: ; http://www.foo.bar/status ; http://www.foo.bar/status?json ; http://www.foo.bar/status?html ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set pm.status_path = /status ; The ping URI to call the monitoring page of FPM. If this value is not set, no ; URI will be recognized as a ping page. This could be used to test from outside ; that FPM is alive and responding, or to ; - create a graph of FPM availability (rrd or such); ; - remove a server from a group if it is not responding (load balancing); ; - trigger alerts for the operating team (24/7). ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set ping.path = /ping ; This directive may be used to customize the response of a ping request. The ; response is formatted as text/plain with a 200 response code. ; Default Value: pong ping.response = pong ; The timeout for serving a single request after which the worker process will ; be killed. This option should be used when the 'max_execution_time' ini option ; does not stop script execution for some reason. A value of '0' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 ;request_terminate_timeout = 0 ; The timeout for serving a single request after which a PHP backtrace will be ; dumped to the 'slowlog' file. A value of '0s' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 ;request_slowlog_timeout = 0 ; The log file for slow requests ; Default Value: not set ; Note: slowlog is mandatory if request_slowlog_timeout is set ;slowlog = log/$pool.log.slow ; Set open file descriptor rlimit. ; Default Value: system defined value ;rlimit_files = 1024 ; Set max core size rlimit. ; Possible Values: 'unlimited' or an integer greater or equal to 0 ; Default Value: system defined value ;rlimit_core = 0 ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one ; of its subdirectories. If the pool prefix is not set, the global prefix ; will be used instead. ; Note: chrooting is a great security feature and should be used whenever ; possible. However, all PHP paths will be relative to the chroot ; (error_log, sessions.save_path, ...). ; Default Value: not set ;chroot = ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot ;chdir = /var/www ; Redirect worker stdout and stderr into main error log. If not set, stdout and ; stderr will be redirected to /dev/null according to FastCGI specs. ; Note: on highloaded environement, this can cause some delay in the page ; process time (several ms). ; Default Value: no ;catch_workers_output = yes ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from ; the current environment. ; Default Value: clean env ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ; Additional php.ini defines, specific to this pool of workers. These settings ; overwrite the values previously defined in the php.ini. The directives are the ; same as the PHP SAPI: ; php_value/php_flag - you can set classic ini defines which can ; be overwritten from PHP call 'ini_set'. ; php_admin_value/php_admin_flag - these directives won't be overwritten by ; PHP call 'ini_set' ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. ; Defining 'extension' will load the corresponding shared extension from ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not ; overwrite previously defined php.ini values, but will append the new value ; instead. ; Note: path INI options can be relative and will be expanded with the prefix ; (pool, global or /opt/php5) ; Default Value: nothing is defined by default except the values in php.ini and ; specified at startup with the -d argument ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i

Read the article

codility challenge, test case OK , Evaluation report Wrong Answer

- by Hussein Fawzy

the aluminium 2014 gives me wrong answer [3 , 9 , -6 , 7 ,-3 , 9 , -6 , -10] got 25 expected 28 but when i repeated the challenge with the same code and make case test it gives me the correct answer Your test case [3, 9, -6, 7, -3, 9, -6, -10] : NO RUNTIME ERRORS (returned value: 28) what is the wrong with it ??? the challenge :- A non-empty zero-indexed array A consisting of N integers is given. A pair of integers (P, Q), such that 0 = P = Q < N, is called a slice of array A. The sum of a slice (P, Q) is the total of A[P] + A[P+1] + ... + A[Q]. The maximum sum is the maximum sum of any slice of A. For example, consider array A such that: A[0] = 3 A[1] = 2 A[2] = -6 A[3] = 3 A[4] = 1 For example (0, 1) is a slice of A that has sum A[0] + A[1] = 5. This is the maximum sum of A. You can perform a single swap operation in array A. This operation takes two indices I and J, such that 0 = I = J < N, and exchanges the values of A[I] and A[J]. To goal is to find the maximum sum you can achieve after performing a single swap. For example, after swapping elements 2 and 4, you will get the following array A: A[0] = 3 A[1] = 2 A[2] = 1 A[3] = 3 A[4] = -6 After that, (0, 3) is a slice of A that has the sum A[0] + A[1] + A[2] + A[3] = 9. This is the maximum sum of A after a single swap. Write a function: class Solution { public int solution(int[] A); } that, given a non-empty zero-indexed array A of N integers, returns the maximum sum of any slice of A after a single swap operation. For example, given: A[0] = 3 A[1] = 2 A[2] = -6 A[3] = 3 A[4] = 1 the function should return 9, as explained above. and my code is :- import java.math.*; class Solution { public int solution(int[] A) { if(A.length == 1) return A[0]; else if (A.length==2) return A[0]+A[1]; else{ int finalMaxSum = A[0]; for (int l=0 ; l<A.length ; l++){ for (int k = l+1 ; k<A.length ; k++ ){ int [] newA = A; int temp = newA[l]; newA [l] = newA[k]; newA[k]=temp; int maxSum = newA[0]; int current_max = newA[0]; for(int i = 1; i < newA.length; i++) { current_max = Math.max(A[i], current_max + newA[i]); maxSum = Math.max(maxSum, current_max); } finalMaxSum = Math.max(finalMaxSum , maxSum); } } return finalMaxSum; } } } i don't know what's the wrong with it ??

Read the article

php crashes with no core file and this message : apc_mmap failed

- by greg0ire

Description of the problem Regularly, cron php processes crash on our production server, which result in mails with the following body : PHP Fatal error: PHP Startup: apc_mmap: mmap failed: in Unknown on line 0 Segmentation fault (core dumped) I think the Segmentation fault (core dumped) should result in core files being handled by apport and then written in /var/crashes, but the files I can see there are there since yesterday, although the last crash occured today : -rw-r----- 1 root whoopsie 1138528 mai 22 04:09 _usr_bin_php5.0.crash -rw-r----- 1 frontoffice whoopsie 1166373 mai 20 18:00 _usr_bin_php5.1005.crash -rw-r----- 1 frontoffice whoopsie 81622658 mai 22 00:05 _usr_sbin_php5-fpm.1005.crash I tried to download the last one anyway, and ran gdb /usr/sbin/php5-fpm /tmp/_usr_sbin_php5-fpm.1005.crash, only to be told that the file is not a core file (its format was not recognized). Here is the server's apc configuration : cat /etc/php5/cli/conf.d/20-apc.ini extension=apc.so apc.shm_size=512M apc.ttl=3600 apc.user_ttl=3600 apc.enable_cli=1 I'm mostly worried about the apc.shm_size… isn't it too high or too low ? I understand it has to do with the size of memory segments. Question(s) What could be the problem ? How can I troubleshoot it (how can I get a valid core file ?) ? System information free total used free shared buffers cached Mem: 5081296 4354684 726612 0 374744 959968 -/+ buffers/cache: 3019972 2061324 Swap: 522236 516888 5348 cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" php -v PHP 5.4.17-1~precise+1 (cli) (built: Jul 17 2013 18:14:06) Copyright (c) 1997-2013 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies php -i excerpt : Configuration apc APC Support => enabled Version => 3.1.13 APC Debugging => Disabled MMAP Support => Enabled MMAP File Mask => Locking type => pthread mutex Locks Serialization Support => php Revision => $Revision: 327136 $ Build Date => Nov 20 2012 18:41:36 Directive => Local Value => Master Value apc.cache_by_default => On => On apc.canonicalize => On => On apc.coredump_unmap => Off => Off apc.enable_cli => On => On apc.enabled => On => On apc.file_md5 => Off => Off apc.file_update_protection => 2 => 2 apc.filters => no value => no value apc.gc_ttl => 3600 => 3600 apc.include_once_override => Off => Off apc.lazy_classes => Off => Off apc.lazy_functions => Off => Off apc.max_file_size => 1M => 1M apc.mmap_file_mask => no value => no value apc.num_files_hint => 1000 => 1000 apc.preload_path => no value => no value apc.report_autofilter => Off => Off apc.rfc1867 => Off => Off apc.rfc1867_freq => 0 => 0 apc.rfc1867_name => APC_UPLOAD_PROGRESS => APC_UPLOAD_PROGRESS apc.rfc1867_prefix => upload_ => upload_ apc.rfc1867_ttl => 3600 => 3600 apc.serializer => default => default apc.shm_segments => 1 => 1 apc.shm_size => 512M => 512M apc.shm_strings_buffer => 4M => 4M apc.slam_defense => On => On apc.stat => On => On apc.stat_ctime => Off => Off apc.ttl => 3600 => 3600 apc.use_request_time => On => On apc.user_entries_hint => 4096 => 4096 apc.user_ttl => 3600 => 3600 apc.write_lock => On => On php -m [PHP Modules] apc bcmath bz2 calendar Core ctype curl date dba dom ereg exif fileinfo filter ftp gd gettext hash iconv imagick intl json ldap libxml mbstring memcache memcached mhash mysql mysqli openssl pcntl pcre PDO pdo_mysql pdo_pgsql pdo_sqlite pgsql Phar posix Reflection session shmop SimpleXML soap sockets SPL sqlite3 standard sysvmsg sysvsem sysvshm tidy tokenizer wddx xml xmlreader xmlwriter zip zlib [Zend Modules] ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 39531 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 39531 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

Read the article

AspxGridView Specified method is not supported. problem

- by shamim

Bellow is my .aspx aspxGridview syntax <dx:ASPxGridView ID="ASPxGridView1" runat="server" AutoGenerateColumns="False" KeyFieldName="intProductCode" onrowinserted="ASPxGridView1_RowInserted"> <Columns> <dx:GridViewCommandColumn VisibleIndex="0"> <EditButton Visible="True"> </EditButton> <NewButton Visible="True"> </NewButton> <DeleteButton Visible="True"> </DeleteButton> </dx:GridViewCommandColumn> <dx:GridViewDataTextColumn Caption="intProductCode" FieldName="intProductCode" VisibleIndex="1"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="strProductName" FieldName="strProductName" VisibleIndex="2"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="SKU" FieldName="SKU" VisibleIndex="3"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="PACK" FieldName="PACK" VisibleIndex="4"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="intQtyPerCase" FieldName="intQtyPerCase" VisibleIndex="5"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="mnyCasePrice" FieldName="mnyCasePrice" VisibleIndex="6"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="intTBQtyPerCase" FieldName="intTBQtyPerCase" VisibleIndex="7"> </dx:GridViewDataTextColumn> <dx:GridViewDataCheckColumn Caption="bIsActive" FieldName="bIsActive" VisibleIndex="8"> </dx:GridViewDataCheckColumn> <dx:GridViewDataTextColumn Caption="intSortingOrder" FieldName="intSortingOrder" VisibleIndex="9"> </dx:GridViewDataTextColumn> <dx:GridViewDataTextColumn Caption="strProductAccCode" FieldName="strProductAccCode" VisibleIndex="10"> </dx:GridViewDataTextColumn> </Columns> </dx:ASPxGridView> Bellow is my C# syntax : protected void Page_Load(object sender, EventArgs e) { if (this.IsPostBack != true) { BindGridView(); } } private void BindGridView() { DB_OrderV2DataContext db = new DB_OrderV2DataContext(); var r = from p in db.tblProductInfos select p; ASPxGridView1.DataSource = r; ASPxGridView1.DataBind(); } protected void LinqServerModeDataSource1_Selecting(object sender, DevExpress.Data.Linq.LinqServerModeDataSourceSelectEventArgs e) { DB_OrderV2DataContext db = new DB_OrderV2DataContext(); var r= from p in db.tblProductInfos select p; e.QueryableSource = r; } protected void ASPxGridView1_RowInserted(object sender, DevExpress.Web.Data.ASPxDataInsertedEventArgs e) { DB_OrderV2DataContext db = new DB_OrderV2DataContext(); tblProductInfo otblProductInfo = new tblProductInfo (); otblProductInfo.intProductCode = (db.tblProductInfos.Max(p => (int?)p.intProductCode) ?? 0) + 1;//oProductController.GenerateProductCode(); otblProductInfo.strProductName = Convert.ToString(e.NewValues["strProductName"]); otblProductInfo.SKU = Convert.ToString(e.NewValues["SKU"]); otblProductInfo.PACK = Convert.ToString(e.NewValues["PACK"]); otblProductInfo.intQtyPerCase = Convert.ToInt32(e.NewValues["intQtyPerCase"]); otblProductInfo.mnyCasePrice = Convert.ToDecimal(e.NewValues["mnyCasePrice"]); otblProductInfo.intTBQtyPerCase = Convert.ToInt32(e.NewValues["intTBQtyPerCase"]); otblProductInfo.bIsActive = Convert.ToBoolean(e.NewValues["bIsActive"]); otblProductInfo.intSortingOrder = (db.tblProductInfos.Max(p => (int?)p.intSortingOrder) ?? 0) + 1;//oProductController.GenerateSortingOrder(); db.tblProductInfos.InsertOnSubmit(otblProductInfo);//the InsertOnSubmit method called in the preceding code was named Add and the DeleteOnSubmit method was named Remove. db.SubmitChanges(); BindGridView(); //oProductController.InsertAndSubmit(); // ASPxGridView1.DataBind(); } My SQL syntax CREATE TABLE [dbo].[tblProductInfo]( [intProductCode] [int] NOT NULL, [strProductName] [varchar](100) NULL, [SKU] [varchar](50) NULL, [PACK] [varchar](50) NULL, [intQtyPerCase] [int] NULL, [mnyCasePrice] [money] NULL, [intTBQtyPerCase] [int] NULL, [bIsActive] [bit] NULL, [intSortingOrder] [int] NULL, [strProductAccCode] [varchar](max) NULL, CONSTRAINT [PK_tblProductInfo] PRIMARY KEY CLUSTERED ( [intProductCode] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] When i want to insert ,show me error message Specified method is not supported. How to solve it.

Read the article

how to run this qt script? (newbie question)

- by GB_J

I have a qt script(barchart.qs) that creates a graph for me. I don't know how i can incorporate(ie show the graph) in my qt mainwindow. Can some one please help me look at the code and what its outputs are? I tried engine.evaluate, but i do not know what is the QScriptValue i'm getting in return. Thanks sooo much. This is the script: BarChart.prototype = new QWidget; BarChart.prototype.suffix = ""; function BarChart(parent) { QWidget.call(this, parent); } // find the maximum value and widest (pixel-wise) label and suffix BarChart.prototype.showEvent = function(event) { var fm = new QFontMetrics(this); this.margin = 20; this.titleHeight = fm.height(); this.barHeight = 1.5 * fm.height(); this.barSpacing = 0.6 * fm.height(); this.maxValue = this.suffixWidth = this.labelWidth = 0; var count = 0; for (d in this.data) { this.labelWidth = Math.max(this.labelWidth, fm.width(d)); this.maxValue = Math.max(this.maxValue, this.data[d]); this.suffixWidth = Math.max(this.suffixWidth, fm.width(String(this.data[d]) + " " + this.suffix)); count++; } this.startHue = 15; this.hueDelta = 360 / count; this.size = new QSize(640, this.titleHeight + 2 * this.margin + (this.barHeight + this.barSpacing) * count); } BarChart.prototype.paintEvent = function(event) { var p = new QPainter; p.begin(this); // background and title p.fillRect(this.rect, new QBrush(new QColor(255, 255, 255))); p.drawText(0, 0, this.width, this.margin + this.titleHeight, Qt.AlignCenter, this.windowTitle, 0); var ofs = this.labelWidth + this.margin; var ww = this.width - this.suffixWidth - ofs - 2 * this.margin; var hue = this.startHue; var y = 0; p.translate(this.margin, this.titleHeight + 1.5 * this.margin); for (d in this.data) { // label on the left side p.setPen(new QColor(Qt.black)); p.drawText(0, y, this.labelWidth, this.barHeight, Qt.AlignVCenter + Qt.AlignRight, d, 0); // the colored bar var gradient = new QLinearGradient(new QPoint(ofs, y), new QPoint(ofs, y + this.barHeight)); gradient.setColorAt(0, QColor.fromHsv(hue, 255, 240)); gradient.setColorAt(1, QColor.fromHsv(hue, 255, 92)); p.setBrush(new QBrush(gradient)); p.setPen(new QColor(96, 96, 96)); var bw = this.data[d] * ww / this.maxValue; p.drawRect(ofs, y, bw, this.barHeight); // extra text at the end of the bar var text = new String(this.data[d] + " " + this.suffix); p.setPen(new QColor(Qt.black)); p.drawText(ofs + bw + this.margin/2, y, this.suffixWidth, this.barHeight, Qt.AlignVCenter + Qt.AlignLeft, text, 0); // for the next bar y += (this.barHeight + this.barSpacing); hue += this.hueDelta; if (hue >= 360) hue -= 360; } p.end(); } BarChart.prototype.wheelEvent = function(event) { this.startHue += event.delta() / 8 / 5; if (this.startHue = 360) this.startHue -= 360; if (this.startHue < 0) this.startHue += 360; this.update(); event.ignore(); } BarChart.prototype.mousePressEvent = function(event) { var fname = QFileDialog.getSaveFileName(this, "Save", ".", "*.png", 0, 0); if (fname.length > 0) { var img = new QImage(this.size, QImage.Format_ARGB32_Premultiplied); this.render(img); img.save(new QFile(fname)); } } var chart = new BarChart; chart.windowTitle = "Monthly"; chart.suffix = "reports"; chart.data = { "September" : 45, "October" : 60, "November" : 56, "December" : 0 }; chart.show(); QCoreApplication.exec();

Read the article

Resolve Wrong IP from Domain Name only on certain networks

- by Godric Seer

I host a personal website on an old desktop that is LAMP based. There are several strange things about this problem so I will break it down into steps. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I use the automatic update client, but logged in and checked and my no-ip domain has the proper IP tied to it. Here is a link to the homepage through the no-ip domain for reference. Also, I do a ping and a traceroute on the no-ip domain and get: [eckertzs@localhost ~]$ ping -c 1 endradil.noip.me PING endradil.noip.me (65.24.215.99) 56(84) bytes of data. 64 bytes from endradil.noip.me (65.24.215.99): icmp_seq=1 ttl=64 time=2.23 ms --- endradil.noip.me ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 104ms rtt min/avg/max/mdev = 2.233/2.233/2.233/0.000 ms [eckertzs@localhost ~]$ traceroute endradil.noip.me traceroute to endradil.noip.me (65.24.215.99), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.755 ms 5.409 ms 5.380 ms 2 endradil.noip.me (65.24.215.99) 6.297 ms 9.543 ms 10.324 ms Using this domain, I can connect to my webserver without issue or interruption(the https is required to avoid a redirect serverside, but it works). I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. CNAME Record Host: www Points to: endradil.noip.me TTL: 1 hour For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of the past few days, however, the GoDaddy domain has only worked intermittently, for a few minutes at a time and then will go down for hours at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have run online tests of the DNS and have seen that the website is visible by external servers and resolved to the correct IP. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. My personal computers (Windows desktop, linux laptop, android phone) all fail to connect when on my personal wifi. If I disconnect my phone from the wifi and use my AT&T wireless data, it can connect with both domains without issue. When I attempt to use Google webmaster tools to crawl the site using the GoDaddy domain, Google can not find the site. From my linux laptop, I have found some interesting results when I ping or traceroute the domain. The results from these: [eckertzs@localhost ~]$ ping -c 1 www.endradil.com PING www.endradil.com.Belkin (198.105.244.228) 56(84) bytes of data. --- www.endradil.com.Belkin ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms [eckertzs@localhost ~]$ traceroute www.endradil.com traceroute to www.endradil.com (198.105.244.228), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.918 ms 2.806 ms 2.772 ms 2 cpe-65-24-208-1.insight.res.rr.com (65.24.208.1) 29.247 ms 29.654 ms 30.094 ms 3 cpe-69-23-24-117.new.res.rr.com (69.23.24.117) 15.597 ms 23.218 ms 23.581 ms 4 agg24.clmcohib01r.midwest.rr.com (65.29.1.52) 30.581 ms 30.556 ms 31.192 ms 5 be27.clevohek01r.midwest.rr.com (65.29.1.38) 30.580 ms 31.062 ms 31.038 ms 6 bu-ether25.atlngamq47w-bcr01.tbone.rr.com (107.14.19.38) 37.863 ms 68.844 ms 43.773 ms 7 107.14.17.178 (107.14.17.178) 51.866 ms 51.019 ms 50.989 ms 8 ae0.pr1.dca10.tbone.rr.com (107.14.17.200) 48.467 ms ae-4-0.a0.lax91.tbone.rr.com (66.109.1.113) 49.912 ms * 9 v413.core1.ash1.he.net (209.51.175.33) 60.270 ms 50.842 ms 50.819 ms 10 100ge5-1.core1.nyc4.he.net (184.105.223.166) 55.597 ms 56.045 ms 56.020 ms 11 xerocole-inc.10gigabitethernet12-4.core1.nyc4.he.net (216.66.41.242) 56.001 ms 55.969 ms 55.992 ms 12 * * * both show the incorrect IP. Also, the traceroute timesout on hops 12 through 255 (output truncated above). The traceroute using site24x7 works and shows reasonable results when run from their california server. From another linux box on a different network but in the same city as me (10 miles away), I still get timeout for traceroute, however the IP resolves correctly for the domain. From this I believe that the DNS result is incorrectly cached in either my router/modem or perhaps even at my ISP level. My question is, first, how do I find out exactly what is wrong, and second, how do I resolve it.

Read the article

form submitting with mechanize and Python

- by MATELIN Alexis

I'm trying to scrap a website that requires to submit two forms : a first one to loggin and a second one to specify my research. I'm using Python and the mechanize package. No problem with the first one, but i just can't figure out how to pass through the second one. Here is the part of my code related to the firm above-mentionned agemin=18 agemax=25 by='region' country='France' region=2 newcustomers=1 browser.select_form(nr=0) browser['age[min]']=agemin browser['age[max]']=agemax browser['country']=country browser['region']=region browser['by']=by browser['new-customers']=newcustomers response=browser.submit() content=response.read() but when I submit the variable 'age[min]' by example, I get the following error message : TypeError: object of type 'int' has no len() to give you some more informations, here is what I get with 'print br.form' <POST http://www.adopteunmec.com/qsearch/ajax_quick application/x-www-form-urlencoded <SelectControl(age[min]=[, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, *30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99])> <SelectControl(age[max]=[, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, *45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99])> <SelectControl(by=[*region, distance])> <SelectControl(country=[*fr, be, ch, ca])> <SelectControl(region=[*1, 2, 3, 4, 5, 6, 7, 8, 22, 23, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 11])> <SelectControl(distance[min]=[*, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 500, 510, 520, 530, 540, 550, 560, 570, 580, 590, 600, 610, 620, 630, 640, 650, 660, 670, 680, 690, 700, 710, 720, 730, 740, 750, 760, 770, 780, 790, 800, 810, 820, 830, 840, 850, 860, 870, 880, 890, 900, 910, 920, 930, 940, 950, 960, 970, 980, 990, 1000])> <SelectControl(distance[max]=[, 0, 10, 20, 30, 40, 50, 60, 70, *80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 500, 510, 520, 530, 540, 550, 560, 570, 580, 590, 600, 610, 620, 630, 640, 650, 660, 670, 680, 690, 700, 710, 720, 730, 740, 750, 760, 770, 780, 790, 800, 810, 820, 830, 840, 850, 860, 870, 880, 890, 900, 910, 920, 930, 940, 950, 960, 970, 980, 990, 1000])> <CheckboxControl(new=[*1])>> My guess is that the form needs an object (like a list) containing all the variables to accept it ; that's why it refuses the variables submited one by one. Thank you in advance for any help ! Alexis

Read the article

Drupal's not reading correct values from DB

- by John

Hey Everyone, Here is my current problem. I am working with the chat module and I'm building a module that notifies users via AJAX that they have been invited to a chat. The current table structure for the invites table looks like this: |-------------------------------------------------------------------------| | CCID | NID | INVITER_UID | INVITEE_UID | NOTIFIED | ACCEPTED | |-------------------------------------------------------------------------| | int | int | int | int | (0 or 1) | (0 or 1) | |-------------------------------------------------------------------------| I'm using the periodical updater plug-in for JQuery to continually poll the server to check for invites. When an invite is found, I set the notified from 0 to 1. However, my problem is the periodical updater. When I first see that there is an invite, I notify the user, and set notified to 1. On the next select though, I get the same results before, as if the update didn't work. But, when I got check the database, I can see that it worked just fine. It's as if the query is querying a cache, but I can't figure it out. My code for the periodical updater is as follows: window.onload = function() { var uid = $('a#chat_uid').html(); $.PeriodicalUpdater( '/steelylib/sites/all/modules/_chat_whos_online/ajax/ajax.php', //url to service { method: 'get', //send data via... data: {uid: uid}, //data to send minTimeout: '1000', //min time before server is polled (milli-sec.) maxTimeout: '20000', //max time before server is polled (milli-sec.) multiplyer: '1.5', //multiply against curretn poll time every time constant data is returned type: 'text', //type of data recieved (response type) maxCalls: 0, //max calls to make (0=unlimited) autoStop: 0 //max calls with constant data (0=unlimited/disabled) }, function(data) //callback function { alert( data ); //for now, until i get it working } ); } And my code for the ajax call is as follows: <?php #bootstrap Drupal, and call function, passing current user's uid. function _create_chat_node_check_invites($uid) { cache_clear_all('chatroom_chat_list', 'cache'); $query = "SELECT * FROM {chatroom_chat_invite} WHERE notified=0 AND invitee_uid=%d and accepted=0"; $query_results = db_query( $query, $uid ); $json = '{"invites":['; while( $row = db_fetch_object($query_results) ) { var_dump($row); global $base_url; $url = $base_url . '/content/privatechat' . $uid .'-' . $row->inviter_uid; $inviter = db_fetch_object( db_query( "SELECT name FROM {users} WHERE uid = %d", $row->inviter_uid ) ); $invitee = db_fetch_object( db_query( "SELECT name FROM {users} WHERE uid = %d", $row->invitee_uid ) ); #reset table $query = "UPDATE {chatroom_chat_invite} " ."SET notified=1 " ."WHERE inviter_uid=%d AND invitee_uid=%d"; db_query( $query, $row->inviter_uid, $row->invitee_uid ); $json .= '['; $json .= '"' . $url . '",'; $json .= '"' . ($inviter->name) . '",'; $json .= '"' . ($invitee->name) . '"' ; $json .= '],'; } $json = substr($json, 0, -1); $json .= ']}'; return $json; } ?> I can't figure out what is going wrong, any help is greatly appreciated!

Read the article

C++ file input/output search

- by Brian J

Hi I took the following code from a program I'm writing to check a user generated string against a dictionary as well as other validation. My problem is that although my dictionary file is referenced correctly,the program gives the default "no dictionary found".I can't see clearly what I'm doing in error here,if anyone has any tips or pointers it would be appreciated, Thanks. //variables for checkWordInFile #define gC_FOUND 99 #define gC_NOT_FOUND -99 // static bool certifyThat(bool condition, const char* error) { if(!condition) printf("%s", error); return !condition; } //method to validate a user generated password following password guidelines. void validatePass() { FILE *fptr; char password[MAX+1]; int iChar,iUpper,iLower,iSymbol,iNumber,iTotal,iResult,iCount; //shows user password guidelines printf("\n\n\t\tPassword rules: "); printf("\n\n\t\t 1. Passwords must be at least 9 characters long and less than 15 characters. "); printf("\n\n\t\t 2. Passwords must have at least 2 numbers in them."); printf("\n\n\t\t 3. Passwords must have at least 2 uppercase letters and 2 lowercase letters in them."); printf("\n\n\t\t 4. Passwords must have at least 1 symbol in them (eg ?, $, £, %)."); printf("\n\n\t\t 5. Passwords may not have small, common words in them eg hat, pow or ate."); //gets user password input get_user_password: printf("\n\n\t\tEnter your password following password rules: "); scanf("%s", &password); iChar = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iUpper = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iLower =countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iSymbol =countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iNumber = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iTotal = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); if(certifyThat(iUpper >= 2, "Not enough uppercase letters!!!\n") || certifyThat(iLower >= 2, "Not enough lowercase letters!!!\n") || certifyThat(iSymbol >= 1, "Not enough symbols!!!\n") || certifyThat(iNumber >= 2, "Not enough numbers!!!\n") || certifyThat(iTotal >= 9, "Not enough characters!!!\n") || certifyThat(iTotal <= 15, "Too many characters!!!\n")) goto get_user_password; iResult = checkWordInFile("dictionary.txt", password); if(certifyThat(iResult != gC_FOUND, "Password contains small common 3 letter word/s.")) goto get_user_password; iResult = checkWordInFile("passHistory.txt",password); if(certifyThat(iResult != gC_FOUND, "Password contains previously used password.")) goto get_user_password; printf("\n\n\n Your new password is verified "); printf(password); //writing password to passHistroy file. fptr = fopen("passHistory.txt", "w"); // create or open the file for( iCount = 0; iCount < 8; iCount++) { fprintf(fptr, "%s\n", password[iCount]); } fclose(fptr); printf("\n\n\n"); system("pause"); }//end validatePass method int checkWordInFile(char * fileName,char * theWord){ FILE * fptr; char fileString[MAX + 1]; int iFound = -99; //open the file fptr = fopen(fileName, "r"); if (fptr == NULL) { printf("\nNo dictionary file\n"); printf("\n\n\n"); system("pause"); return (0); // just exit the program } /* read the contents of the file */ while( fgets(fileString, MAX, fptr) ) { if( 0 == strcmp(theWord, fileString) ) { iFound = -99; } } fclose(fptr); return(0); }//end of checkwORDiNFile

Read the article

how to get rid off garbage in array of chars?

- by fang_dejavu

hi, I'm writing a C program but I keep having problems with my array of chars. I keep getting garbage when I print it using prinf. here is an example of what I get when I print it: char at t.symbol is Aôÿ¿ char at tabl[0].symbol is A char at tabl[1].symbol is a char at tabl[2].symbol is a char at tabl[3].symbol is d char at tabl[4].symbol is e char at tabl[5].symbol is f char at tabl[6].symbol is g char at tabl[7].symbol is h char at tabl[8].symbol is i char at tabl[9].symbol is x char at t[0].symbol is a0AÃ char at t[1].symbol is b)@Ã4 char at t[2].symbol is ckU* char at t[3].symbol is Aôÿ¿ char at t[4].symbol is gØ could someone tell me how to get rid off the garbage in the array of chars? here is my code #define MAX 100 #ifndef SYMBSIZE #define SYMBSIZE 1 #endif typedef struct tableme { char symbol[SYMBSIZE]; int value; int casenmbr; int otherinfo; }tabletype; int main(int argc, char **argv) { tabletype t[MAX]; t[3].symbol[0] = 'A'; t[0].value=1; t[0].casenmbr = 7; t[0].otherinfo = 682; tabletype tabl[MAX]; tabl[0].value = 1; tabl[0].symbol[0] = 'A'; tabl[1].value = 11; tabl[1].symbol[0]= 'a'; tabl[2].value = 12; tabl[2].symbol[0] = 'a'; tabl[3].value = 13; tabl[3].symbol[0] = 'd'; tabl[4].value = 14; tabl[4].symbol[0] = 'e'; tabl[5].value = 15; tabl[5].symbol[0] = 'f'; tabl[6].value = 16; tabl[6].symbol[0] = 'g'; tabl[7].value = 17; tabl[7].symbol[0] = 'h'; tabl[8].symbol[0] = 'i'; tabl[9].symbol[0] = 'x'; t[1].symbol[0] = 'b'; t[0].symbol[0]= 'a'; t[2].symbol[0]= 'c'; t[4].symbol[0]= 'g'; printf("char at t.symbol is %s \n", t[3].symbol); for( x=0;x<10;x++) { printf("char at tabl[%d].symbol is %s \n",x, tabl[x].symbol); } int j; for(j = 0; j<5;j++) { printf("char at t[%d].symbol is %s \n",j, t[j].symbol); } return 0; }

Read the article

C# : Console.Read() does not get the "right" input

- by Daemonfire3002nd

Hi there, I have the following code: The actual problem is the "non-quoted" code. I want to get the player amount (max = 4), but when I ask via Console.Read() and I enter any Int from 1 to 4 I get as value: 48 + Console.Read(). They only thing how I can get the "real" input is using Console.ReadLine(), but this does not give me an Integer, no it returns a string, and actually do not know how to convert String (Numbers) to Integers in C#, because I am new, and because I only found ToString() and not ToNumber. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace eve_calc_tool { class Program { int players; int units; int active_units; int inactive_units; int finished_units; int lastDiceNumber = 0; bool game_state; public static void Main(string[] args) { int count_game = 0; //Console.Title = "Mensch ärger dich nicht"; //Console.WriteLine("\tNeues Spiel wird"); //Console.WriteLine("\t...geladen"); //System.Threading.Thread.Sleep(5000); //Console.Clear(); //Console.WriteLine("Neues Spiel wird gestartet, bitte haben sie etwas Geduld"); //Console.Title = "Spiel " + count_game.ToString(); //Console.Clear(); //string prevText = "Anzahl der Spieler: "; //Console.WriteLine(prevText); string read = Console.ReadLine(); /*Program game = new Program(); game.players = read; game.setPlayers(game.players); if (game.players > 0 && 5 > game.players) { game.firstRound(); }*/ string readagain = read; Console.ReadLine(); } /* bool setPlayers(int amount) { players = amount; if (players > 0) { return true; } else { return false; } } bool createGame() { inactive_units = units = getPlayers() * 4; active_units = 0; finished_units = 0; game_state = true; if (game_state == true) { return true; } else { return false; } } int getPlayers() { return players; } private static readonly Random random = new Random(); private static readonly object syncLock = new object(); public static int RandomNumber(int min, int max) { lock (syncLock) { // synchronize return random.Next(min, max); } } int rollDice() { lastDiceNumber = RandomNumber(1,6); return lastDiceNumber; } int firstRound() { int[] results = new int[getPlayers()]; for (int i = 0; i < getPlayers(); i++) { results[i] = rollDice(); } Array.Sort(results); return results[3]; } */ } }

Read the article

Unable to display images through media queries form stylesheet

- by kNair

I'm trying to create a responsive homepage with max-width of 1024 first. However the images are not displaying when I called from the css file. I did include the stylesheet inside the home page and the current viewport is 1024. I can't find my mistake, please help. Thanks. homepage <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta name="viewport" content="width=device-width,initial-scale=1"/> <title>Responsive design</title> <link rel="stylesheet" href="res-style.css" type="text/css" media="screen and (max-width:1024px)"/> </head> <body> <table class="ct"> <tr> <td class="1"> <?php include 'menu.php'; ?> </td> </tr> <tr> <td class="2"> </td> </tr> <tr> <td class='3'> <img src="NewLogo1.png"></td> </tr> <tr> <td class='4'> </td> </tr> <tr> <td class='5'> wefhuiweabhfuia</td> </tr> </table> </body> </html> stylesheet @charset "utf-8"; /* CSS Document */ @media screen and (max-width:1024px) { .ct{min-width:1000px;height:898px;border:0;} .1{background-image:url('images/text-5_02.png');min-width:1000px;height:43px;margin-left:10px;background-repeat:no-repeat;display:inherit;} .2{background-image:url('images/text-5_04.png');min-width:1000px;height:256px;background-repeat:no-repeat;} .3{background-image:url('images/text-5_05.png');min-width:1000px;height:288px;padding-left:25%;background-repeat:no-repeat;} .4{background-image:url('images/text-5_06.png');min-width:1000px;height:256px;background-repeat:no-repeat;} .5{background-image:url('images/text-5_07.png');min-width:1000px;height:55px;background-repeat:no-repeat;} }

Read the article

SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28

- by pinaldave

Jonathan Kehayias (Blog | Twitter) is a MCITP Database Administrator and Developer, who got started in SQL Server in 2004 as a database developer and report writer in the natural gas industry. After spending two and a half years working in TSQL, in late 2006, he transitioned to the role of SQL Database Administrator. His primary passion is performance tuning, where he frequently rewrites queries for better performance and performs in depth analysis of index implementation and usage. Jonathan blogs regularly on SQLBlog, and was a coauthor of Professional SQL Server 2008 Internals and Troubleshooting. On a personal note, I think Jonathan is extremely positive person. In every conversation with him I have found that he is always eager to help and encourage. Every time he finds something needs to be approved, he has contacted me without hesitation and guided me to improve, change and learn. During all the time, he has not lost his focus to help larger community. I am honored that he has accepted to provide his views on complex subject of Wait Types and Queues. Currently I am reading his series on Extended Events. Here is the guest blog post by Jonathan: SQL Server troubleshooting is all about correlating related pieces of information together to indentify where exactly the root cause of a problem lies. In my daily work as a DBA, I generally get phone calls like, “So and so application is slow, what’s wrong with the SQL Server.” One of the funny things about the letters DBA is that they go so well with Default Blame Acceptor, and I really wish that I knew exactly who the first person was that pointed that out to me, because it really fits at times. A lot of times when I get this call, the problem isn’t related to SQL Server at all, but every now and then in my initial quick checks, something pops up that makes me start looking at things further. The SQL Server is slow, we see a number of tasks waiting on ASYNC_IO_COMPLETION, IO_COMPLETION, or PAGEIOLATCH_* waits in sys.dm_exec_requests and sys.dm_exec_waiting_tasks. These are also some of the highest wait types in sys.dm_os_wait_stats for the server, so it would appear that we have a disk I/O bottleneck on the machine. A quick check of sys.dm_io_virtual_file_stats() and tempdb shows a high write stall rate, while our user databases show high read stall rates on the data files. A quick check of some performance counters and Page Life Expectancy on the server is bouncing up and down in the 50-150 range, the Free Page counter consistently hits zero, and the Free List Stalls/sec counter keeps jumping over 10, but Buffer Cache Hit Ratio is 98-99%. Where exactly is the problem? In this case, which happens to be based on a real scenario I faced a few years back, the problem may not be a disk bottleneck at all; it may very well be a memory pressure issue on the server. A quick check of the system spec’s and it is a dual duo core server with 8GB RAM running SQL Server 2005 SP1 x64 on Windows Server 2003 R2 x64. Max Server memory is configured at 6GB and we think that this should be enough to handle the workload; or is it? This is a unique scenario because there are a couple of things happening inside of this system, and they all relate to what the root cause of the performance problem is on the system. If we were to query sys.dm_exec_query_stats for the TOP 10 queries, by max_physical_reads, max_logical_reads, and max_worker_time, we may be able to find some queries that were using excessive I/O and possibly CPU against the system in their worst single execution. We can also CROSS APPLY to sys.dm_exec_sql_text() and see the statement text, and also CROSS APPLY sys.dm_exec_query_plan() to get the execution plan stored in cache. Ok, quick check, the plans are pretty big, I see some large index seeks, that estimate 2.8GB of data movement between operators, but everything looks like it is optimized the best it can be. Nothing really stands out in the code, and the indexing looks correct, and I should have enough memory to handle this in cache, so it must be a disk I/O problem right? Not exactly! If we were to look at how much memory the plan cache is taking by querying sys.dm_os_memory_clerks for the CACHESTORE_SQLCP and CACHESTORE_OBJCP clerks we might be surprised at what we find. In SQL Server 2005 RTM and SP1, the plan cache was allowed to take up to 75% of the memory under 8GB. I’ll give you a second to go back and read that again. Yes, you read it correctly, it says 75% of the memory under 8GB, but you don’t have to take my word for it, you can validate this by reading Changes in Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2. In this scenario the application uses an entirely adhoc workload against SQL Server and this leads to plan cache bloat, and up to 4.5GB of our 6GB of memory for SQL can be consumed by the plan cache in SQL Server 2005 SP1. This in turn reduces the size of the buffer cache to just 1.5GB, causing our 2.8GB of data movement in this expensive plan to cause complete flushing of the buffer cache, not just once initially, but then another time during the queries execution, resulting in excessive physical I/O from disk. Keep in mind that this is not the only query executing at the time this occurs. Remember the output of sys.dm_io_virtual_file_stats() showed high read stalls on the data files for our user databases versus higher write stalls for tempdb? The memory pressure is also forcing heavier use of tempdb to handle sorting and hashing in the environment as well. The real clue here is the Memory counters for the instance; Page Life Expectancy, Free List Pages, and Free List Stalls/sec. The fact that Page Life Expectancy is fluctuating between 50 and 150 constantly is a sign that the buffer cache is experiencing constant churn of data, once every minute to two and a half minutes. If you add to the Page Life Expectancy counter, the consistent bottoming out of Free List Pages along with Free List Stalls/sec consistently spiking over 10, and you have the perfect memory pressure scenario. All of sudden it may not be that our disk subsystem is the problem, but is instead an innocent bystander and victim. Side Note: The Page Life Expectancy counter dropping briefly and then returning to normal operating values intermittently is not necessarily a sign that the server is under memory pressure. The Books Online and a number of other references will tell you that this counter should remain on average above 300 which is the time in seconds a page will remain in cache before being flushed or aged out. This number, which equates to just five minutes, is incredibly low for modern systems and most published documents pre-date the predominance of 64 bit computing and easy availability to larger amounts of memory in SQL Servers. As food for thought, consider that my personal laptop has more memory in it than most SQL Servers did at the time those numbers were posted. I would argue that today, a system churning the buffer cache every five minutes is in need of some serious tuning or a hardware upgrade. Back to our problem and its investigation: There are two things really wrong with this server; first the plan cache is excessively consuming memory and bloated in size and we need to look at that and second we need to evaluate upgrading the memory to accommodate the workload being performed. In the case of the server I was working on there were a lot of single use plans found in sys.dm_exec_cached_plans (where usecounts=1). Single use plans waste space in the plan cache, especially when they are adhoc plans for statements that had concatenated filter criteria that is not likely to reoccur with any frequency. SQL Server 2005 doesn’t natively have a way to evict a single plan from cache like SQL Server 2008 does, but MVP Kalen Delaney, showed a hack to evict a single plan by creating a plan guide for the statement and then dropping that plan guide in her blog post Geek City: Clearing a Single Plan from Cache. We could put that hack in place in a job to automate cleaning out all the single use plans periodically, minimizing the size of the plan cache, but a better solution would be to fix the application so that it uses proper parameterized calls to the database. You didn’t write the app, and you can’t change its design? Ok, well you could try to force parameterization to occur by creating and keeping plan guides in place, or we can try forcing parameterization at the database level by using ALTER DATABASE <dbname> SET PARAMETERIZATION FORCED and that might help. If neither of these help, we could periodically dump the plan cache for that database, as discussed as being a problem in Kalen’s blog post referenced above; not an ideal scenario. The other option is to increase the memory on the server to 16GB or 32GB, if the hardware allows it, which will increase the size of the plan cache as well as the buffer cache. In SQL Server 2005 SP1, on a system with 16GB of memory, if we set max server memory to 14GB the plan cache could use at most 9GB [(8GB*.75)+(6GB*.5)=(6+3)=9GB], leaving 5GB for the buffer cache. If we went to 32GB of memory and set max server memory to 28GB, the plan cache could use at most 16GB [(8*.75)+(20*.5)=(6+10)=16GB], leaving 12GB for the buffer cache. Thankfully we have SQL Server 2005 Service Pack 2, 3, and 4 these days which include the changes in plan cache sizing discussed in the Changes to Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2 blog post. In real life, when I was troubleshooting this problem, I spent a week trying to chase down the cause of the disk I/O bottleneck with our Server Admin and SAN Admin, and there wasn’t much that could be done immediately there, so I finally asked if we could increase the memory on the server to 16GB, which did fix the problem. It wasn’t until I had this same problem occur on another system that I actually figured out how to really troubleshoot this down to the root cause. I couldn’t believe the size of the plan cache on the server with 16GB of memory when I actually learned about this and went back to look at it. SQL Server is constantly telling a story to anyone that will listen. As the DBA, you have to sit back and listen to all that it’s telling you and then evaluate the big picture and how all the data you can gather from SQL about performance relate to each other. One of the greatest tools out there is actually a free in the form of Diagnostic Scripts for SQL Server 2005 and 2008, created by MVP Glenn Alan Berry. Glenn’s scripts collect a majority of the information that SQL has to offer for rapid troubleshooting of problems, and he includes a lot of notes about what the outputs of each individual query might be telling you. When I read Pinal’s blog post SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28, I noticed that he referenced Checking Memory Related Performance Counters in his post, but there was no real explanation about why checking memory counters is so important when looking at an I/O related wait type. I thought I’d chat with him briefly on Google Talk/Twitter DM and point this out, and offer a couple of other points I noted, so that he could add the information to his blog post if he found it useful. Instead he asked that I write a guest blog for this. I am honored to be a guest blogger, and to be able to share this kind of information with the community. The information contained in this blog post is a glimpse at how I do troubleshooting almost every day of the week in my own environment. SQL Server provides us with a lot of information about how it is running, and where it may be having problems, it is up to us to play detective and find out how all that information comes together to tell us what’s really the problem. This blog post is written by Jonathan Kehayias (Blog | Twitter). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Read the article

Revisiting ANTS Performance Profiler 7.4

- by James Michael Hare

Last year, I did a small review on the ANTS Performance Profiler 6.3, now that it’s a year later and a major version number higher, I thought I’d revisit the review and revise my last post. This post will take the same examples as the original post and update them to show what’s new in version 7.4 of the profiler. Background A performance profiler’s main job is to keep track of how much time is typically spent in each unit of code. This helps when we have a program that is not running at the performance we expect, and we want to know where the program is experiencing issues. There are many profilers out there of varying capabilities. Red Gate’s typically seem to be the very easy to “jump in” and get started with very little training required. So let’s dig into the Performance Profiler. I’ve constructed a very crude program with some obvious inefficiencies. It’s a simple program that generates random order numbers (or really could be any unique identifier), adds it to a list, sorts the list, then finds the max and min number in the list. Ignore the fact it’s very contrived and obviously inefficient, we just want to use it as an example to show off the tool: 1: // our test program 2: public static class Program 3: { 4: // the number of iterations to perform 5: private static int _iterations = 1000000; 6: 7: // The main method that controls it all 8: public static void Main() 9: { 10: var list = new List<string>(); 11: 12: for (int i = 0; i < _iterations; i++) 13: { 14: var x = GetNextId(); 15: 16: AddToList(list, x); 17: 18: var highLow = GetHighLow(list); 19: 20: if ((i % 1000) == 0) 21: { 22: Console.WriteLine("{0} - High: {1}, Low: {2}", i, highLow.Item1, highLow.Item2); 23: Console.Out.Flush(); 24: } 25: } 26: } 27: 28: // gets the next order id to process (random for us) 29: public static string GetNextId() 30: { 31: var random = new Random(); 32: var num = random.Next(1000000, 9999999); 33: return num.ToString(); 34: } 35: 36: // add it to our list - very inefficiently! 37: public static void AddToList(List<string> list, string item) 38: { 39: list.Add(item); 40: list.Sort(); 41: } 42: 43: // get high and low of order id range - very inefficiently! 44: public static Tuple<int,int> GetHighLow(List<string> list) 45: { 46: return Tuple.Create(list.Max(s => Convert.ToInt32(s)), list.Min(s => Convert.ToInt32(s))); 47: } 48: } So let’s run it through the profiler and see what happens! Visual Studio Integration First, let’s look at how the ANTS profilers integrate with Visual Studio’s menu system. Once you install the ANTS profilers, you will get an ANTS menu item with several options: Notice that you can either Profile Performance or Launch ANTS Performance Profiler. These sound similar but achieve two slightly different actions: Profile Performance: this immediately launches the profiler with all defaults selected to profile the active project in Visual Studio. Launch ANTS Performance Profiler: this launches the profiler much the same way as starting it from the Start Menu. The profiler will pre-populate the application and path information, but allow you to change the settings before beginning the profile run. So really, the main difference is that Profile Performance immediately begins profiling with the default selections, where Launch ANTS Performance Profiler allows you to change the defaults and attach to an already-running application. Let’s Fire it Up! So when you fire up ANTS either via Start Menu or Launch ANTS Performance Profiler menu in Visual Studio, you are presented with a very simple dialog to get you started: Notice you can choose from many different options for application type. You can profile executables, services, web applications, or just attach to a running process. In fact, in version 7.4 we see two new options added: ASP.NET Web Application (IIS Express) SharePoint web application (IIS) So this gives us an additional way to profile ASP.NET applications and the ability to profile SharePoint applications as well. You can also choose your level of detail in the Profiling Mode drop down. If you choose Line-Level and method-level timings detail, you will get a lot more detail on the method durations, but this will also slow down profiling somewhat. If you really need the profiler to be as unintrusive as possible, you can change it to Sample method-level timings. This is performing very light profiling, where basically the profiler collects timings of a method by examining the call-stack at given intervals. Which method you choose depends a lot on how much detail you need to find the issue and how sensitive your program issues are to timing. So for our example, let’s just go with the line and method timing detail. So, we check that all the options are correct (if you launch from VS2010, the executable and path are filled in already), and fire it up by clicking the [Start Profiling] button. Profiling the Application Once you start profiling the application, you will see a real-time graph of CPU usage that will indicate how much your application is using the CPU(s) on your system. During this time, you can select segments of the graph and bookmark them, giving them mnemonic names. This can be useful if you want to compare performance in one part of the run to another part of the run. Notice that once you select a block, it will give you the call tree breakdown for that selection only, and the relative performance of those calls. Once you feel you have collected enough information, you can click [Stop Profiling] to stop the application run and information collection and begin a more thorough analysis. Analyzing Method Timings So now that we’ve halted the run, we can look around the GUI and see what we can see. By default, the times are shown in terms of percentage of time of the total run of the application, though you can change it in the View menu item to milliseconds, ticks, or seconds as well. This won’t affect the percentages of methods, it only affects what units the times are shown. Notice also that the major hotspot seems to be in a method without source, ANTS Profiler will filter these out by default, but you can right-click on the line and remove the filter to see more detail. This proves especially handy when a bottleneck is due to a method in the BCL. So now that we’ve removed the filter, we see a bit more detail: In addition, ANTS Performance Profiler gives you the ability to decompile the methods without source so that you can dive even deeper, though typically this isn’t necessary for our purposes. When looking at timings, there are generally two types of timings for each method call: Time: This is the time spent ONLY in this method, not including calls this method makes to other methods. Time With Children: This is the total of time spent in both this method AND including calls this method makes to other methods. In other words, the Time tells you how much work is being done exclusively in this method, and the Time With Children tells you how much work is being done inclusively in this method and everything it calls. You can also choose to display the methods in a tree or in a grid. The tree view is the default and it shows the method calls arranged in terms of the tree representing all method calls and the parent method that called them, etc. This is useful for when you find a hot-spot method, you can see who is calling it to determine if the problem is the method itself, or if it is being called too many times. The grid method represents each method only once with its totals and is useful for quickly seeing what method is the trouble spot. In addition, you can choose to display Methods with source which are generally the methods you wrote (as opposed to native or BCL code), or Any Method which shows not only your methods, but also native calls, JIT overhead, synchronization waits, etc. So these are just two ways of viewing the same data, and you’re free to choose the organization that best suits what information you are after. Analyzing Method Source If we look at the timings above, we see that our AddToList() method (and in particular, it’s call to the List<T>.Sort() method in the BCL) is the hot-spot in this analysis. If ANTS sees a method that is consuming the most time, it will flag it as a hot-spot to help call out potential areas of concern. This doesn’t mean the other statistics aren’t meaningful, but that the hot-spot is most likely going to be your biggest bang-for-the-buck to concentrate on. So let’s select the AddToList() method, and see what it shows in the source window below: Notice the source breakout in the bottom pane when you select a method (from either tree or grid view). This shows you the timings in this method per line of code. This gives you a major indicator of where the trouble-spot in this method is. So in this case, we see that performing a Sort() on the List<T> after every Add() is killing our performance! Of course, this was a very contrived, duh moment, but you’d be surprised how many performance issues become duh moments. Note that this one line is taking up 86% of the execution time of this application! If we eliminate this bottleneck, we should see drastic improvement in the performance. So to fix this, if we still wanted to maintain the List<T> we’d have many options, including: delay Sort() until after all Add() methods, using a SortedSet, SortedList, or SortedDictionary depending on which is most appropriate, or forgoing the sorting all together and using a Dictionary. Rinse, Repeat! So let’s just change all instances of List<string> to SortedSet<string> and run this again through the profiler: Now we see the AddToList() method is no longer our hot-spot, but now the Max() and Min() calls are! This is good because we’ve eliminated one hot-spot and now we can try to correct this one as well. As before, we can then optimize this part of the code (possibly by taking advantage of the fact the list is now sorted and returning the first and last elements). We can then rinse and repeat this process until we have eliminated as many bottlenecks as possible. Calls by Web Request Another feature that was added recently is the ability to view .NET methods grouped by the HTTP requests that caused them to run. This can be helpful in determining which pages, web services, etc. are causing hot spots in your web applications. Summary If you like the other ANTS tools, you’ll like the ANTS Performance Profiler as well. It is extremely easy to use with very little product knowledge required to get up and running. There are profilers built into the higher product lines of Visual Studio, of course, which are also powerful and easy to use. But for quickly jumping in and finding hot spots rapidly, Red Gate’s Performance Profiler 7.4 is an excellent choice. Technorati Tags: Influencers,ANTS,Performance Profiler,Profiler

Read the article

Developing a SQL Server Function in a Test-Harness.

- by Phil Factor

/* Many times, it is a lot quicker to take some pain up-front and make a proper development/test harness for a routine (function or procedure) rather than think ‘I’m feeling lucky today!’. Then, you keep code and harness together from then on. Every time you run the build script, it runs the test harness too. The advantage is that, if the test harness persists, then it is much less likely that someone, probably ‘you-in-the-future’ unintentionally breaks the code. If you store the actual code for the procedure as well as the test harness, then it is likely that any bugs in functionality will break the build rather than to introduce subtle bugs later on that could even slip through testing and get into production. This is just an example of what I mean. Imagine we had a database that was storing addresses with embedded UK postcodes. We really wouldn’t want that. Instead, we might want the postcode in one column and the address in another. In effect, we’d want to extract the entire postcode string and place it in another column. This might be part of a table refactoring or int could easily be part of a process of importing addresses from another system. We could easily decide to do this with a function that takes in a table as its parameter, and produces a table as its output. This is all very well, but we’d need to work on it, and test it when you make an alteration. By its very nature, a routine like this either works very well or horribly, but there is every chance that you might introduce subtle errors by fidding with it, and if young Thomas, the rather cocky developer who has just joined touches it, it is bound to break. right, we drop the function we’re developing and re-create it. This is so we avoid the problem of having to change CREATE to ALTER when working on it. */ IF EXISTS(SELECT * FROM sys.objects WHERE name LIKE ‘ExtractPostcode’ and schema_name(schema_ID)=‘Dbo’) DROP FUNCTION dbo.ExtractPostcode GO /* we drop the user-defined table type and recreate it */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘AddressesWithPostCodes’ and schema_name(schema_ID)=‘Dbo’) DROP TYPE dbo.AddressesWithPostCodes GO /* we drop the user defined table type and recreate it */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘OutputFormat’ and schema_name(schema_ID)=‘Dbo’) DROP TYPE dbo.OutputFormat GO /* and now create the table type that we can use to pass the addresses to the function */ CREATE TYPE AddressesWithPostCodes AS TABLE ( AddressWithPostcode_ID INT IDENTITY PRIMARY KEY, –because they work better that way! Address_ID INT NOT NULL, –the address we are fixing TheAddress VARCHAR(100) NOT NULL –The actual address ) GO CREATE TYPE OutputFormat AS TABLE ( Address_ID INT PRIMARY KEY, –the address we are fixing TheAddress VARCHAR(1000) NULL, –The actual address ThePostCode VARCHAR(105) NOT NULL – The Postcode ) GO CREATE FUNCTION ExtractPostcode(@AddressesWithPostCodes AddressesWithPostCodes READONLY) /** summary: > This Table-valued function takes a table type as a parameter, containing a table of addresses along with their integer IDs. Each address has an embedded postcode somewhere in it but not consistently in a particular place. The routine takes out the postcode and puts it in its own column, passing back a table where theinteger key is accompanied by the address without the (first) postcode and the postcode. If no postcode, then the address is returned unchanged and the postcode will be a blank string Author: Phil Factor Revision: 1.3 date: 20 May 2014 example: – code: returns: > Table of Address_ID, TheAddress and ThePostCode. **/ RETURNS @FixedAddresses TABLE ( Address_ID INT, –the address we are fixing TheAddress VARCHAR(1000) NULL, –The actual address ThePostCode VARCHAR(105) NOT NULL – The Postcode ) AS – body of the function BEGIN DECLARE @BlankRange VARCHAR(10) SELECT @BlankRange = CHAR(0)+‘- ‘+CHAR(160) INSERT INTO @FixedAddresses(Address_ID, TheAddress, ThePostCode) SELECT Address_ID, CASE WHEN start>0 THEN REPLACE(STUFF([Theaddress],start,matchlength,”),‘ ‘,‘ ‘) ELSE TheAddress END AS TheAddress, CASE WHEN Start>0 THEN SUBSTRING([Theaddress],start,matchlength-1) ELSE ” END AS ThePostCode FROM (–we have a derived table with the results we need for the chopping SELECT MAX(PATINDEX([matched],‘ ‘+[Theaddress] collate SQL_Latin1_General_CP850_Bin)) AS start, MAX( CASE WHEN PATINDEX([matched],‘ ‘+[Theaddress] collate SQL_Latin1_General_CP850_Bin)>0 THEN TheLength ELSE 0 END) AS matchlength, MAX(TheAddress) AS TheAddress, Address_ID FROM (SELECT –first the match, then the length. There are three possible valid matches ‘%['+@BlankRange+'][A-Z][0-9] [0-9][A-Z][A-Z]%’, 7 –seven character postcode UNION ALL SELECT ‘%['+@BlankRange+'][A-Z][A-Z0-9][A-Z0-9] [0-9][A-Z][A-Z]%’, 8 UNION ALL SELECT ‘%['+@BlankRange+'][A-Z][A-Z][A-Z0-9][A-Z0-9] [0-9][A-Z][A-Z]%’, 9) AS f(Matched,TheLength) CROSS JOIN @AddressesWithPostCodes GROUP BY [address_ID] ) WORK; RETURN END GO ——————————-end of the function———————— IF NOT EXISTS (SELECT * FROM sys.objects WHERE name LIKE ‘ExtractPostcode’) BEGIN RAISERROR (‘There was an error creating the function.’,16,1) RETURN END /* now the job is only half done because we need to make sure that it works. So we now load our sample data, making sure that for each Sample, we have what we actually think the output should be. */ DECLARE @InputTable AddressesWithPostCodes INSERT INTO @InputTable(Address_ID,TheAddress) VALUES(1,’14 Mason mews, Awkward Hill, Bibury, Cirencester, GL7 5NH’), (2,’5 Binney St Abbey Ward Buckinghamshire HP11 2AX UK’), (3,‘BH6 3BE 8 Moor street, East Southbourne and Tuckton W Bournemouth UK’), (4,’505 Exeter Rd, DN36 5RP Hawerby cum BeesbyLincolnshire UK’), (5,”), (6,’9472 Lind St, Desborough Northamptonshire NN14 2GH NN14 3GH UK’), (7,’7457 Cowl St, #70 Bargate Ward Southampton SO14 3TY UK’), (8,”’The Pippins”, 20 Gloucester Pl, Chirton Ward, Tyne & Wear NE29 7AD UK’), (9,’929 Augustine lane, Staple Hill Ward South Gloucestershire BS16 4LL UK’), (10,’45 Bradfield road, Parwich Derbyshire DE6 1QN UK’), (11,’63A Northampton St, Wilmington Kent DA2 7PP UK’), (12,’5 Hygeia avenue, Loundsley Green WardDerbyshire S40 4LY UK’), (13,’2150 Morley St,Dee Ward Dumfries and Galloway DG8 7DE UK’), (14,’24 Bolton St, Broxburn, Uphall and Winchburg West Lothian EH52 5TL UK’), (15,’4 Forrest St, Weston-Super-Mare North Somerset BS23 3HG UK’), (16,’89 Noon St, Carbrooke Norfolk IP25 6JQ UK’), (17,’99 Guthrie St, New Milton Hampshire BH25 5DF UK’), (18,’7 Richmond St, Parkham Devon EX39 5DJ UK’), (19,’9165 laburnum St, Darnall Ward Yorkshire, South S4 7WN UK’) Declare @OutputTable OutputFormat –the table of what we think the correct results should be Declare @IncorrectRows OutputFormat –done for error reporting –here is the table of what we think the output should be, along with a few edge cases. INSERT INTO @OutputTable(Address_ID,TheAddress, ThePostcode) VALUES (1, ’14 Mason mews, Awkward Hill, Bibury, Cirencester, ‘,‘GL7 5NH’), (2, ’5 Binney St Abbey Ward Buckinghamshire UK’,‘HP11 2AX’), (3, ’8 Moor street, East Southbourne and Tuckton W Bournemouth UK’,‘BH6 3BE’), (4, ’505 Exeter Rd,Hawerby cum Beesby Lincolnshire UK’,‘DN36 5RP’), (5, ”,”), (6, ’9472 Lind St,Desborough Northamptonshire NN14 3GH UK’,‘NN14 2GH’), (7, ’7457 Cowl St, #70 Bargate Ward Southampton UK’,‘SO14 3TY’), (8, ”’The Pippins”, 20 Gloucester Pl, Chirton Ward,Tyne & Wear UK’,‘NE29 7AD’), (9, ’929 Augustine lane, Staple Hill Ward South Gloucestershire UK’,‘BS16 4LL’), (10, ’45 Bradfield road, ParwichDerbyshire UK’,‘DE6 1QN’), (11, ’63A Northampton St,Wilmington Kent UK’,‘DA2 7PP’), (12, ’5 Hygeia avenue, Loundsley Green WardDerbyshire UK’,‘S40 4LY’), (13, ’2150 Morley St, Dee Ward Dumfries and Galloway UK’,‘DG8 7DE’), (14, ’24 Bolton St,Broxburn, Uphall and Winchburg West Lothian UK’,‘EH52 5TL’), (15, ’4 Forrest St,Weston-Super-Mare North Somerset UK’,‘BS23 3HG’), (16, ’89 Noon St, Carbrooke Norfolk UK’,‘IP25 6JQ’), (17, ’99 Guthrie St, New Milton Hampshire UK’,‘BH25 5DF’), (18, ’7 Richmond St, Parkham Devon UK’,‘EX39 5DJ’), (19, ’9165 laburnum St, Darnall Ward Yorkshire, South UK’,‘S4 7WN’) insert into @IncorrectRows(Address_ID,TheAddress, ThePostcode) SELECT Address_ID,TheAddress,ThePostCode FROM dbo.ExtractPostcode(@InputTable) EXCEPT SELECT Address_ID,TheAddress,ThePostCode FROM @outputTable; If @@RowCount>0 Begin PRINT ‘The following rows gave ‘; SELECT Address_ID,TheAddress,ThePostCode FROM @IncorrectRows RAISERROR (‘These rows gave unexpected results.’,16,1); end /* For tear-down, we drop the user defined table type */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘OutputFormat’ and schema_name(schema_ID)=‘Dbo’) DROP TYPE dbo.OutputFormat GO /* once this is working, the development work turns from a chore into a delight and one ends up hitting execute so much more often to catch mistakes as soon as possible. It also prevents a wildly-broken routine getting into a build! */

Read the article

Database Migration Scripts: Getting from place A to place B

- by Phil Factor

We’ll be looking at a typical database ‘migration’ script which uses an unusual technique to migrate existing ‘de-normalised’ data into a more correct form. So, the book-distribution business that uses the PUBS database has gradually grown organically, and has slipped into ‘de-normalisation’ habits. What’s this? A new column with a list of tags or ‘types’ assigned to books. Because books aren’t really in just one category, someone has ‘cured’ the mismatch between the database and the business requirements. This is fine, but it is now proving difficult for their new website that allows searches by tags. Any request for history book really has to look in the entire list of associated tags rather than the ‘Type’ field that only keeps the primary tag. We have other problems. The TypleList column has duplicates in there which will be affecting the reporting, and there is the danger of mis-spellings getting there. The reporting system can’t be persuaded to do reports based on the tags and the Database developers are complaining about the unCoddly things going on in their database. In your version of PUBS, this extra column doesn’t exist, so we’ve added it and put in 10,000 titles using SQL Data Generator. /* So how do we refactor this database? firstly, we create a table of all the tags. */IF OBJECT_ID('TagName') IS NULL OR OBJECT_ID('TagTitle') IS NULL BEGIN CREATE TABLE TagName (TagName_ID INT IDENTITY(1,1) PRIMARY KEY , Tag VARCHAR(20) NOT NULL UNIQUE) /* ...and we insert into it all the tags from the list (remembering to take out any leading spaces */ INSERT INTO TagName (Tag) SELECT DISTINCT LTRIM(x.y.value('.', 'Varchar(80)')) AS [Tag] FROM (SELECT Title_ID, CONVERT(XML, '<list><i>' + REPLACE(TypeList, ',', '</i><i>') + '</i></list>') AS XMLkeywords FROM dbo.titles)g CROSS APPLY XMLkeywords.nodes('/list/i/text()') AS x ( y ) /* we can then use this table to provide a table that relates tags to articles */ CREATE TABLE TagTitle (TagTitle_ID INT IDENTITY(1, 1), [title_id] [dbo].[tid] NOT NULL REFERENCES titles (Title_ID), TagName_ID INT NOT NULL REFERENCES TagName (Tagname_ID) CONSTRAINT [PK_TagTitle] PRIMARY KEY CLUSTERED ([title_id] ASC, TagName_ID) ON [PRIMARY]) CREATE NONCLUSTERED INDEX idxTagName_ID ON TagTitle (TagName_ID) INCLUDE (TagTitle_ID,title_id) /* ...and it is easy to fill this with the tags for each title ... */ INSERT INTO TagTitle (Title_ID, TagName_ID) SELECT DISTINCT Title_ID, TagName_ID FROM (SELECT Title_ID, CONVERT(XML, '<list><i>' + REPLACE(TypeList, ',', '</i><i>') + '</i></list>') AS XMLkeywords FROM dbo.titles)g CROSS APPLY XMLkeywords.nodes('/list/i/text()') AS x ( y ) INNER JOIN TagName ON TagName.Tag=LTRIM(x.y.value('.', 'Varchar(80)')) END /* That's all there was to it. Now we can select all titles that have the military tag, just to try things out */SELECT Title FROM titles INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID WHERE tagname.tag='Military'/* and see the top ten most popular tags for titles */SELECT Tag, COUNT(*) FROM titles INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID GROUP BY Tag ORDER BY COUNT(*) DESC/* and if you still want your list of tags for each title, then here they are */SELECT title_ID, title, STUFF( (SELECT ','+tagname.tag FROM titles thisTitle INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID WHERE ThisTitle.title_id=titles.title_ID FOR XML PATH(''), TYPE).value('.', 'varchar(max)') ,1,1,'') FROM titles ORDER BY title_ID So we’ve refactored our PUBS database without pain. We’ve even put in a check to prevent it being re-run once the new tables are created. Here is the diagram of the new tag relationship We’ve done both the DDL to create the tables and their associated components, and the DML to put the data in them. I could have also included the script to remove the de-normalised TypeList column, but I’d do a whole lot of tests first before doing that. Yes, I’ve left out the assertion tests too, which should check the edge cases and make sure the result is what you’d expect. One thing I can’t quite figure out is how to deal with an ordered list using this simple XML-based technique. We can ensure that, if we have to produce a list of tags, we can get the primary ‘type’ to be first in the list, but what if the entire order is significant? Thank goodness it isn’t in this case. If it were, we might have to revisit a string-splitter function that returns the ordinal position of each component in the sequence. You’ll see immediately that we can create a synchronisation script for deployment from a comparison tool such as SQL Compare, to change the schema (DDL). On the other hand, no tool could do the DML to stuff the data into the new table, since there is no way that any tool will be able to work out where the data should go. We used some pretty hairy code to deal with a slightly untypical problem. We would have to do this migration by hand, and it has to go into source control as a batch. If most of your database changes are to be deployed by an automated process, then there must be a way of over-riding this part of the data synchronisation process to do this part of the process taking the part of the script that fills the tables, Checking that the tables have not already been filled, and executing it as part of the transaction. Of course, you might prefer the approach I’ve taken with the script of creating the tables in the same batch as the data conversion process, and then using the presence of the tables to prevent the script from being re-run. The problem with scripting a refactoring change to a database is that it has to work both ways. If we install the new system and then have to rollback the changes, several books may have been added, or had their tags changed, in the meantime. Yes, you have to script any rollback! These have to be mercilessly tested, and put in source control just in case of the rollback of a deployment after it has been in place for any length of time. I’ve shown you how to do this with the part of the script .. /* and if you still want your list of tags for each title, then here they are */SELECT title_ID, title, STUFF( (SELECT ','+tagname.tag FROM titles thisTitle INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID WHERE ThisTitle.title_id=titles.title_ID FOR XML PATH(''), TYPE).value('.', 'varchar(max)') ,1,1,'') FROM titles ORDER BY title_ID …which would be turned into an UPDATE … FROM script. UPDATE titles SET typelist= ThisTaglistFROM (SELECT title_ID, title, STUFF( (SELECT ','+tagname.tag FROM titles thisTitle INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID WHERE ThisTitle.title_id=titles.title_ID ORDER BY CASE WHEN tagname.tag=titles.[type] THEN 1 ELSE 0 END DESC FOR XML PATH(''), TYPE).value('.', 'varchar(max)') ,1,1,'') AS ThisTagList FROM titles)fINNER JOIN Titles ON f.title_ID=Titles.title_ID You’ll notice that it isn’t quite a round trip because the tags are in a different order, though we’ve managed to make sure that the primary tag is the first one as originally. So, we’ve improved the database for the poor book distributors using PUBS. It is not a major deal but you’ve got to be prepared to provide a migration script that will go both forwards and backwards. Ideally, database refactoring scripts should be able to go from any version to any other. Schema synchronization scripts can do this pretty easily, but no data synchronisation scripts can deal with serious refactoring jobs without the developers being able to specify how to deal with cases like this.

Read the article

adresse book with C programming, i have problem with library i think, couldn't complite my code

- by osabri

I've divided my code in small programm so it can be easy to excute /* ab_error.c : in case of errors following messages will be displayed */ #include "adressbook.h" static char *errormsg[] = { "", "\nNot enough space on disk", "\nCannot open file", "\nCannot read file", "\nCannot write file" }; void check(int error) { switch(error) { case 0: return; case 1: write_file(); case 2: case 3: case 4: system("cls"); fputs(errormsg[error], stderr); exit(error); } } 2nd /* ab_fileio.c : functions for file input/output */ include "adressbook.h" static char ab_file[] = "ADRESSBOOK.DAT"; //file to save the entries int read_file(void) { int error = 0; FILE *fp; ELEMENT *new_e, *last_e = NULL; DATA buffer; if( (fp = fopen(ab_file, "rb")) == NULL) return -1; //no file found while (fread(&buffer, sizeof(DATA), 1, fp) == 1) //reads one list element after another { if( (new_e = make_element()) == NULL) { error = 1; break; //not enough space } new_e->person = buffer; //copy data to new element new_e->next = NULL; if(hol.first == NULL) //list is empty? hol.first = new_e; //yes else last_e->next = new_e; //no last_e = new_e; ++hol.amount; } if( !error && !feof(fp) ) error = 3; //cannot read file fclose(fp); return error; } /-------------------------------/ int write_file(void) { int error = 0; FILE *fp; ELEMENT *p; if( (p = hol.first) == NULL) return 0; //list is empty if( (fp = fopen(ab_file, "wb")) == NULL) return 2; //cannot open while( p!= NULL) { if( fwrite(&p->person, sizeof(DATA), 1, fp) < 1) { error = 4; break; //cannot write } p = p->next; } fclose(fp); return error; } 3rd /* ab_list.c : functions to manipulate the list */ #include "adressbook.h" HOL hol = {0, NULL}; //global definition for head of list /* -------------------- */ ELEMENT *make_element(void) { return (ELEMENT *)malloc( sizeof(ELEMENT) ); } /* -------------------- */ int ins_element( DATA *newdata) { ELEMENT *new_e, *pre_p; if((new_e = make_element()) == NULL) return 1; new_e ->person = *newdata; // copy data to new element pre_p = search(new_e->person.family_name); if(pre_p == NULL) //no person in list { new_e->next = hol.first; //put it to the begin hol.first = new_e; } else { new_e->next = pre_p->next; pre_p->next = new_e; } ++hol.amount; return 0; } int erase_element( char name, char surname ) { return 0; } /* ---------------------*/ ELEMENT *search(char *name) { ELEMENT *sp, *retp; //searchpointer, returnpointer retp = NULL; sp = hol.first; while(sp != NULL && sp->person.family_name != name) { retp = sp; sp = sp->next; } return(retp); } 4th /* ab_screen.c : functions for printing information on screen */ #include "adressbook.h" #include <conio.h> #include <ctype.h> /* standard prompts for in- and output */ static char pgmname[] = "---- Oussama's Adressbook made in splendid C ----"; static char options[] = "\ 1: Enter new adress\n\n\ 2: Delete entry\n\n\ 3: Change entry\n\n\ 4: Print adress\n\n\ Esc: Exit\n\n\n\ Your choice . . .: "; static char prompt[] = "\ Name . . . .:\n\ Surname . . :\n\n\ Street . . .:\n\n\ House number:\n\n\ Postal code :\n\n\ Phone number:"; static char buttons[] = "\ <Esc> = cancel input <Backspace> = correct input\ <Return> = assume"; static char headline[] = "\ Name Surname Street House Postal code Phone number \n\ ------------------------------------------------------------------------"; static char further[] = "\ -------- continue with any key --------"; /* ---------------------------------- */ int menu(void) //show menu and read user input { int c; system ("cls"); set_cur(0,20); puts(pgmname); set_cur(6,0); printf("%s", options); while( (c = getch()) != ESC && (c < '1' || c > '4')) putch('\a'); return c; } /* ---------------------------------- */ int print_adr_book(void) //display adressbook { int line = 1; ELEMENT *p = hol.first; system("cls"); set_cur(0,20); puts(pgmname); set_cur(2,0); puts(headline); set_cur(5,0); while(p != NULL) //run through list and show entries { printf("%5d %-15s ",line, p->person.family_name); printf("%-12s %-15s ", p->person.given_name, p->person.street); printf("%-4d %-5d %-12d\n",p->person.house_number, p->person.postal_code, p->person.phone); p = p->next; if( p == NULL || ++line %16 == 1) //end of list or screen is full { set_cur(24,0); printf("%s",further); if( getch() == ESC) return 0; set_cur(5,0); scroll_up(0,5,24);//puts(headline); } } return 0; } /* -------------------------------------------*/ int make_entry(void) { char cache[50]; DATA newperson; ELEMENT *p; while(1) { system("cls"); set_cur(0,20); puts(pgmname); set_cur(6,0); puts("Please enter new data:"); set_cur(10,0); puts(prompt); set_cur(24,0); printf("%s",buttons); balken(10, 25, MAXL, ' ',0x70); //input name if(input(newperson.family_name, MAXL, ESC, CR) == ESC) return 0; balken(12,25, MAXL, ' ', 0x70); //surname if(input(newperson.given_name, MAXL, ESC, CR) == ESC) return 0; balken(14,25, 30, ' ', 0x70); //street if(input(newperson.street, 30, ESC, CR) == ESC) return 0; balken(16,25, 4, ' ',0x70); //housenumber if(input(cache, 4, ESC, CR) == ESC) return 0; newperson.house_number = atol(cache); //to string balken(18,25, 5, ' ',0x70); //postal code if(input(cache, 5, ESC, CR) == ESC) return 0; newperson.postal_code = atol(cache); //to string balken(20,25, 20, ' ',0x70); //phone number if(input(cache, 20, ESC, CR) == ESC) return 0; newperson.phone = atol(cache); //to string p = search(newperson.phone); if( p!= NULL && p->person.phone == newperson.phone) { set_cur(22,25); puts("phonenumber already exists!"); set_cur(24,0); printf("%s, further"); getch(); continue; } } } 5th /* adress_book_project.c : main program to create an adressbook */ /* copyrights by Oussama Sabri, June 2010 */ #include "adressbook.h" //project header file int main() { int rv, cmd; //return value, user command if ( (rv = read_file() ) == -1) // no data saved yet rv = make_entry(); check(rv); //prompts an error and quits program on disfunction do { switch (cmd = menu())//calls menu and gets user input back { case '1': rv = make_entry(); break; case '2': //delete entry case '3': //changes entry rv = change_entry(cmd); break; case '4': //prints adressbook on screen rv = print_adr_book(); break; case ESC: //end of program system ("cls"); rv = 0; break; } }while(cmd!= ESC); check ( write_file() ); //save adressbook return 0; } 6th /* Getcb.c --> Die Funktion getcb() liefert die naechste * * Tastatureingabe (ruft den BIOS-INT 0x16 auf). * * Return-Wert: * * ASCII-Code bzw. erweiterter Code + 256 */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> int getcb(void) { union REGS intregs; intregs.h.ah = 0; // Subfunktion 0: ein Zeichen // von der Tastatur lesen. int86( 0x16, &intregs, &intregs); if( intregs.h.al != 0) // Falls ASCII-Zeichen, return (intregs.h.al); // dieses zurueckgeben. else // Sonst den erweiterten return (intregs.h.ah + 0x100); // Code + 256 } 7th /* PUTCB.C --> enthaelt die Funktionen * * - putcb() * * - putcb9() * * - balken() * * - input() * * * * Es werden die Funktionen 9 und 14 des Video-Interrupts * * (ROM-BIOS-Interrupt 0x10) verwendet. * * * * Die Prototypen dieser Funktionen stehen in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #define VIDEO_INT 0x10 /*---------------------------------------------------------------- * putcb(c) gibt das Zeichen auf der aktuellen Cursor-Position * am Bildschirm aus. Der Cursor wird versetzt. * Steuerzeichen Back-Space, CR, LF und BELL werden * ausgefuehrt. * Return-Wert: keiner */ void putcb(unsigned char c) /* Gibt das Zeichen in c auf */ { /* den Bildschirm aus. */ union REGS intregs; intregs.h.ah = 14; /* Subfunktion 14 ("Teletype") */ intregs.h.al = c; intregs.h.bl = 0xf; /* Vordergrund-Farbe im */ /* Grafik-Modus. */ int86(VIDEO_INT, &intregs, &intregs); } /*---------------------------------------------------------------- * putcb9(c,count,mode) gibt das Zeichen in c count-mal im * angegebenen Modus auf der aktuellen * Cursor-Position am Bildschirm aus. * Der Cursor wird nicht versetzt. * * Return-Wert: keiner */ void putcb9( unsigned char c, /* das Zeichen */ unsigned count, /* die Anzahl */ unsigned mode ) /* Low-Byte: das Atrribut */ { /* High-Byte: die Bildschirmseite*/ union REGS intregs; intregs.h.ah = 9; /* Subfunktion 9 des Int 0x10 */ intregs.h.al = c; intregs.x.bx = mode; intregs.x.cx = count; int86( VIDEO_INT, &intregs, &intregs); } /*---------------------------------------------------------------- * balken() positioniert den Cursor und zeichnet einen Balken, * wobei Position, L„nge, Fllzeichen und Attribut * als Argumente bergeben werden. * Der Cursor bleibt auf der ersten Position im Balken. */ void balken( unsigned int zeile, /* Start-Position */ unsigned int spalte, unsigned int laenge, /* Laenge des Balkens */ unsigned char c, /* Fuellzeichen */ unsigned int modus) /* Low-Byte: Attribut */ /* High-Byte: Bildschirmseite */ { union REGS intregs; intregs.h.ah = 2; /* Cursor auf der angegebenen */ intregs.h.dh = zeile; /* Bildschirmseite versetzen. */ intregs.h.dl = spalte; intregs.h.bh = (modus >> 8); int86(VIDEO_INT, &intregs, &intregs); putcb9(c, laenge, modus); /* Balken ausgeben. */ } /*---------------------------------------------------------------- * input() liest Zeichen von der Tastatur ein und haengt '\0' an. * Mit Backspace kann die Eingabe geloescht werden. * Das Attribut am Bildschirm bleibt erhalten. * * Argumente: 1. Zeiger auf den Eingabepuffer. * 2. Anzahl maximal einzulesender Zeichen. * 3. Die optionalen Argumente: Zeichen, mit denen die * Eingabe abgebrochen werden kann. * Diese Liste muá mit CR = '\r' enden! * Return-Wert: Das Zeichen, mit dem die Eingabe abgebrochen wurde. */ #include <stdarg.h> int getcb( void); /* Zum Lesen der Tastatur */ int input(char *puffer, int max,... ) { int c; /* aktuelles Zeichen */ int breakc; /* Abruchzeichen */ int nc = 0; /* Anzahl eingelesener Zeichen */ va_list argp; /* Zeiger auf die weiteren Arumente */ while(1) { *puffer = '\0'; va_start(argp, max); /* argp initialisieren */ c = getcb(); do /* Mit Zeichen der Abbruchliste vergleichen */ if(c == (breakc = va_arg(argp,int)) ) return(breakc); while( breakc != '\r' ); va_end( argp); if( c == '\b' && nc > 0) /* Backspace? */ { --nc; --puffer; putcb(c); putcb(' '); putcb(c); } else if( c >= 32 && c <= 255 && nc < max ) { ++nc; *puffer++ = c; putcb(c); } else if( nc == max) putcb('\7'); /* Ton ausgeben */ } } 8th /* Video.c --> Enthaelt die Funktionen * cls(), * scroll_up(), scroll_down(), * set_cur(), get_cur(), * set_screen_page(), get_screen_page() * * Die Prototypen dieser Funktionen befinden sich in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #include "bio.h" #define VIDEO_INT 0x10 typedef unsigned char BYTE; void scroll_up( int anzahl, int anf_zeile, int end_zeile) { /* Fenster hoch rollen. */ union REGS intregs; intregs.x.ax = 0x600 + anzahl; /* Subfunktion AH = 6, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void scroll_down( int anzahl, int anf_zeile, int end_zeile) { /* Fenster runter rollen. */ union REGS intregs; intregs.x.ax = 0x700 + anzahl; /* Subfunktion AH = 7, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void set_cur( int zeile, int spalte) /* versetzt den Cursor */ { /* der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 2; intregs.h.dh = (BYTE)zeile; intregs.h.dl = (BYTE)spalte; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); } void get_cur(int *zeile, int *spalte) /* holt die Cursor- */ { /* Position der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 3; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); *zeile = (unsigned)intregs.h.dh; *spalte = (unsigned)intregs.h.dl; } void cls(void) { scroll_up(0,0,24); /* Gesamten Bildschirm loeschen. */ set_cur(0,0); /* Cursor in Home-Position. */ } int get_screen_page(void) /* Aktuelle Bildschirmseite holen.*/ { union REGS intregs; intregs.h.ah = 15; /* Subfunktion AH = 15: */ /* Bildschirm-Modus feststellen. */ int86(VIDEO_INT, &intregs, &intregs); return (intregs.h.bh); } void set_screen_page(int seite) /* setzt die aktive Seite des */ { /* Bildschirmpuffers auf die */ /* angegebene Seite. */ union REGS intregs; intregs.x.ax = 0x500 + seite; /* Subfunktion AH = 5 */ int86(VIDEO_INT, &intregs, &intregs); } /* ------------------------------------------------------------- Ein kleines Testprogramm : */ /* #include <stdio.h> int main() { cls(); set_cur(23, 0); printf("Weiter mit <Return>\n"); set_cur(12, 20); printf("Ein Test!\n"); getchar(); scroll_up(3, 5, 20); getchar(); scroll_down(6, 5, 20); getchar(); set_screen_page(1); printf("\nAuf der 2. Seite !\n"); getchar(); set_screen_page(0); set_cur(0,0); printf("\nWieder auf der 1. Seite !\n"); getchar(); cls(); return 0; } */ /* Video.c --> Enthaelt die Funktionen * cls(), * scroll_up(), scroll_down(), * set_cur(), get_cur(), * set_screen_page(), get_screen_page() * * Die Prototypen dieser Funktionen befinden sich in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #include "bio.h" #define VIDEO_INT 0x10 typedef unsigned char BYTE; void scroll_up( int anzahl, int anf_zeile, int end_zeile) { /* Fenster hoch rollen. */ union REGS intregs; intregs.x.ax = 0x600 + anzahl; /* Subfunktion AH = 6, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void scroll_down( int anzahl, int anf_zeile, int end_zeile) { /* Fenster runter rollen. */ union REGS intregs; intregs.x.ax = 0x700 + anzahl; /* Subfunktion AH = 7, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void set_cur( int zeile, int spalte) /* versetzt den Cursor */ { /* der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 2; intregs.h.dh = (BYTE)zeile; intregs.h.dl = (BYTE)spalte; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); } void get_cur(int *zeile, int *spalte) /* holt die Cursor- */ { /* Position der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 3; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); *zeile = (unsigned)intregs.h.dh; *spalte = (unsigned)intregs.h.dl; } void cls(void) { scroll_up(0,0,24); /* Gesamten Bildschirm loeschen. */ set_cur(0,0); /* Cursor in Home-Position. */ } int get_screen_page(void) /* Aktuelle Bildschirmseite holen.*/ { union REGS intregs; intregs.h.ah = 15; /* Subfunktion AH = 15: */ /* Bildschirm-Modus feststellen. */ int86(VIDEO_INT, &intregs, &intregs); return (intregs.h.bh); } void set_screen_page(int seite) /* setzt die aktive Seite des */ { /* Bildschirmpuffers auf die */ /* angegebene Seite. */ union REGS intregs; intregs.x.ax = 0x500 + seite; /* Subfunktion AH = 5 */ int86(VIDEO_INT, &intregs, &intregs); } /* ------------------------------------------------------------- Ein kleines Testprogramm : */ /* #include <stdio.h> int main() { cls(); set_cur(23, 0); printf("Weiter mit <Return>\n"); set_cur(12, 20); printf("Ein Test!\n"); getchar(); scroll_up(3, 5, 20); getchar(); scroll_down(6, 5, 20); getchar(); set_screen_page(1); printf("\nAuf der 2. Seite !\n"); getchar(); set_screen_page(0); set_cur(0,0); printf("\nWieder auf der 1. Seite !\n"); getchar(); cls(); return 0; } */ /* BIO.H --> Enthaelt die Prototypen der BIOS-Funktionen. */ /* --- Funktionen in VIDEO.C --- */ extern void scroll_up(int anzahl, int anf_zeile,int end_zeile); extern void scroll_down(int anzahl, int anf_zeile, int end_zeile); extern void set_cur(int zeile, int spalte); extern void get_cur(int *zeile, int *spalte); extern void cls(void); extern int get_screen_page(void); extern void set_screen_page(int page); /* --- Funktionen in GETCB.C / PUTCB.C --- */ extern int getcb(void); extern void putcb(int c); extern void putcb9(int c, unsigned count, unsigned modus); extern void balken(int zeile, int spalte, int laenge, int c, unsigned modus); extern int input(char *puffer, int max,... ); need your help, can't find my mistakes:((

Read the article

Address book with C programming; cannot compile my code.

- by osabri

I've divided my code into small programs so it can be easy to excute /* ab_error.c : in case of errors following messages will be displayed */ #include "adressbook.h" static char *errormsg[] = { "", "\nNot enough space on disk", "\nCannot open file", "\nCannot read file", "\nCannot write file" }; void check(int error) { switch(error) { case 0: return; case 1: write_file(); case 2: case 3: case 4: system("cls"); fputs(errormsg[error], stderr); exit(error); } } 2nd /* ab_fileio.c : functions for file input/output */ #include "adressbook.h" static char ab_file[] = "ADRESSBOOK.DAT"; //file to save the entries int read_file(void) { int error = 0; FILE *fp; ELEMENT *new_e, *last_e = NULL; DATA buffer; if( (fp = fopen(ab_file, "rb")) == NULL) return -1; //no file found while (fread(&buffer, sizeof(DATA), 1, fp) == 1) //reads one list element after another { if( (new_e = make_element()) == NULL) { error = 1; break; //not enough space } new_e->person = buffer; //copy data to new element new_e->next = NULL; if(hol.first == NULL) //list is empty? hol.first = new_e; //yes else last_e->next = new_e; //no last_e = new_e; ++hol.amount; } if( !error && !feof(fp) ) error = 3; //cannot read file fclose(fp); return error; } /*-------------------------------*/ int write_file(void) { int error = 0; FILE *fp; ELEMENT *p; if( (p = hol.first) == NULL) return 0; //list is empty if( (fp = fopen(ab_file, "wb")) == NULL) return 2; //cannot open while( p!= NULL) { if( fwrite(&p->person, sizeof(DATA), 1, fp) < 1) { error = 4; break; //cannot write } p = p->next; } fclose(fp); return error; } 3rd /* ab_list.c : functions to manipulate the list */ #include "adressbook.h" HOL hol = {0, NULL}; //global definition for head of list /* -------------------- */ ELEMENT *make_element(void) { return (ELEMENT *)malloc( sizeof(ELEMENT) ); } /* -------------------- */ int ins_element( DATA *newdata) { ELEMENT *new_e, *pre_p; if((new_e = make_element()) == NULL) return 1; new_e ->person = *newdata; // copy data to new element pre_p = search(new_e->person.family_name); if(pre_p == NULL) //no person in list { new_e->next = hol.first; //put it to the begin hol.first = new_e; } else { new_e->next = pre_p->next; pre_p->next = new_e; } ++hol.amount; return 0; } int erase_element( char name, char surname ) { return 0; } /* ---------------------*/ ELEMENT *search(char *name) { ELEMENT *sp, *retp; //searchpointer, returnpointer retp = NULL; sp = hol.first; while(sp != NULL && sp->person.family_name != name) { retp = sp; sp = sp->next; } return(retp); } 4th /* ab_screen.c : functions for printing information on screen */ #include "adressbook.h" #include <conio.h> #include <ctype.h> /* standard prompts for in- and output */ static char pgmname[] = "---- Oussama's Adressbook made in splendid C ----"; static char options[] = "\ 1: Enter new adress\n\n\ 2: Delete entry\n\n\ 3: Change entry\n\n\ 4: Print adress\n\n\ Esc: Exit\n\n\n\ Your choice . . .: "; static char prompt[] = "\ Name . . . .:\n\ Surname . . :\n\n\ Street . . .:\n\n\ House number:\n\n\ Postal code :\n\n\ Phone number:"; static char buttons[] = "\ <Esc> = cancel input <Backspace> = correct input\ <Return> = assume"; static char headline[] = "\ Name Surname Street House Postal code Phone number \n\ ------------------------------------------------------------------------"; static char further[] = "\ -------- continue with any key --------"; /* ---------------------------------- */ int menu(void) //show menu and read user input { int c; system ("cls"); set_cur(0,20); puts(pgmname); set_cur(6,0); printf("%s", options); while( (c = getch()) != ESC && (c < '1' || c > '4')) putch('\a'); return c; } /* ---------------------------------- */ int print_adr_book(void) //display adressbook { int line = 1; ELEMENT *p = hol.first; system("cls"); set_cur(0,20); puts(pgmname); set_cur(2,0); puts(headline); set_cur(5,0); while(p != NULL) //run through list and show entries { printf("%5d %-15s ",line, p->person.family_name); printf("%-12s %-15s ", p->person.given_name, p->person.street); printf("%-4d %-5d %-12d\n",p->person.house_number, p->person.postal_code, p->person.phone); p = p->next; if( p == NULL || ++line %16 == 1) //end of list or screen is full { set_cur(24,0); printf("%s",further); if( getch() == ESC) return 0; set_cur(5,0); scroll_up(0,5,24);//puts(headline); } } return 0; } /* -------------------------------------------*/ int make_entry(void) { char cache[50]; DATA newperson; ELEMENT *p; while(1) { system("cls"); set_cur(0,20); puts(pgmname); set_cur(6,0); puts("Please enter new data:"); set_cur(10,0); puts(prompt); set_cur(24,0); printf("%s",buttons); balken(10, 25, MAXL, ' ',0x70); //input name if(input(newperson.family_name, MAXL, ESC, CR) == ESC) return 0; balken(12,25, MAXL, ' ', 0x70); //surname if(input(newperson.given_name, MAXL, ESC, CR) == ESC) return 0; balken(14,25, 30, ' ', 0x70); //street if(input(newperson.street, 30, ESC, CR) == ESC) return 0; balken(16,25, 4, ' ',0x70); //housenumber if(input(cache, 4, ESC, CR) == ESC) return 0; newperson.house_number = atol(cache); //to string balken(18,25, 5, ' ',0x70); //postal code if(input(cache, 5, ESC, CR) == ESC) return 0; newperson.postal_code = atol(cache); //to string balken(20,25, 20, ' ',0x70); //phone number if(input(cache, 20, ESC, CR) == ESC) return 0; newperson.phone = atol(cache); //to string p = search(newperson.phone); if( p!= NULL && p->person.phone == newperson.phone) { set_cur(22,25); puts("phonenumber already exists!"); set_cur(24,0); printf("%s, further"); getch(); continue; } } } 5th /* adress_book_project.c : main program to create an adressbook */ /* copyrights by Oussama Sabri, June 2010 */ #include "adressbook.h" //project header file int main() { int rv, cmd; //return value, user command if ( (rv = read_file() ) == -1) // no data saved yet rv = make_entry(); check(rv); //prompts an error and quits program on disfunction do { switch (cmd = menu())//calls menu and gets user input back { case '1': rv = make_entry(); break; case '2': //delete entry case '3': //changes entry rv = change_entry(cmd); break; case '4': //prints adressbook on screen rv = print_adr_book(); break; case ESC: //end of program system ("cls"); rv = 0; break; } }while(cmd!= ESC); check ( write_file() ); //save adressbook return 0; } 6th /* Getcb.c --> Die Funktion getcb() liefert die naechste * * Tastatureingabe (ruft den BIOS-INT 0x16 auf). * * Return-Wert: * * ASCII-Code bzw. erweiterter Code + 256 */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> int getcb(void) { union REGS intregs; intregs.h.ah = 0; // Subfunktion 0: ein Zeichen // von der Tastatur lesen. int86( 0x16, &intregs, &intregs); if( intregs.h.al != 0) // Falls ASCII-Zeichen, return (intregs.h.al); // dieses zurueckgeben. else // Sonst den erweiterten return (intregs.h.ah + 0x100); // Code + 256 } 7th /* PUTCB.C --> enthaelt die Funktionen * * - putcb() * * - putcb9() * * - balken() * * - input() * * * * Es werden die Funktionen 9 und 14 des Video-Interrupts * * (ROM-BIOS-Interrupt 0x10) verwendet. * * * * Die Prototypen dieser Funktionen stehen in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #define VIDEO_INT 0x10 /*---------------------------------------------------------------- * putcb(c) gibt das Zeichen auf der aktuellen Cursor-Position * am Bildschirm aus. Der Cursor wird versetzt. * Steuerzeichen Back-Space, CR, LF und BELL werden * ausgefuehrt. * Return-Wert: keiner */ void putcb(unsigned char c) /* Gibt das Zeichen in c auf */ { /* den Bildschirm aus. */ union REGS intregs; intregs.h.ah = 14; /* Subfunktion 14 ("Teletype") */ intregs.h.al = c; intregs.h.bl = 0xf; /* Vordergrund-Farbe im */ /* Grafik-Modus. */ int86(VIDEO_INT, &intregs, &intregs); } /*---------------------------------------------------------------- * putcb9(c,count,mode) gibt das Zeichen in c count-mal im * angegebenen Modus auf der aktuellen * Cursor-Position am Bildschirm aus. * Der Cursor wird nicht versetzt. * * Return-Wert: keiner */ void putcb9( unsigned char c, /* das Zeichen */ unsigned count, /* die Anzahl */ unsigned mode ) /* Low-Byte: das Atrribut */ { /* High-Byte: die Bildschirmseite*/ union REGS intregs; intregs.h.ah = 9; /* Subfunktion 9 des Int 0x10 */ intregs.h.al = c; intregs.x.bx = mode; intregs.x.cx = count; int86( VIDEO_INT, &intregs, &intregs); } /*---------------------------------------------------------------- * balken() positioniert den Cursor und zeichnet einen Balken, * wobei Position, L„nge, Fllzeichen und Attribut * als Argumente bergeben werden. * Der Cursor bleibt auf der ersten Position im Balken. */ void balken( unsigned int zeile, /* Start-Position */ unsigned int spalte, unsigned int laenge, /* Laenge des Balkens */ unsigned char c, /* Fuellzeichen */ unsigned int modus) /* Low-Byte: Attribut */ /* High-Byte: Bildschirmseite */ { union REGS intregs; intregs.h.ah = 2; /* Cursor auf der angegebenen */ intregs.h.dh = zeile; /* Bildschirmseite versetzen. */ intregs.h.dl = spalte; intregs.h.bh = (modus >> 8); int86(VIDEO_INT, &intregs, &intregs); putcb9(c, laenge, modus); /* Balken ausgeben. */ } /*---------------------------------------------------------------- * input() liest Zeichen von der Tastatur ein und haengt '\0' an. * Mit Backspace kann die Eingabe geloescht werden. * Das Attribut am Bildschirm bleibt erhalten. * * Argumente: 1. Zeiger auf den Eingabepuffer. * 2. Anzahl maximal einzulesender Zeichen. * 3. Die optionalen Argumente: Zeichen, mit denen die * Eingabe abgebrochen werden kann. * Diese Liste muá mit CR = '\r' enden! * Return-Wert: Das Zeichen, mit dem die Eingabe abgebrochen wurde. */ #include <stdarg.h> int getcb( void); /* Zum Lesen der Tastatur */ int input(char *puffer, int max,... ) { int c; /* aktuelles Zeichen */ int breakc; /* Abruchzeichen */ int nc = 0; /* Anzahl eingelesener Zeichen */ va_list argp; /* Zeiger auf die weiteren Arumente */ while(1) { *puffer = '\0'; va_start(argp, max); /* argp initialisieren */ c = getcb(); do /* Mit Zeichen der Abbruchliste vergleichen */ if(c == (breakc = va_arg(argp,int)) ) return(breakc); while( breakc != '\r' ); va_end( argp); if( c == '\b' && nc > 0) /* Backspace? */ { --nc; --puffer; putcb(c); putcb(' '); putcb(c); } else if( c >= 32 && c <= 255 && nc < max ) { ++nc; *puffer++ = c; putcb(c); } else if( nc == max) putcb('\7'); /* Ton ausgeben */ } } 8th /* Video.c --> Enthaelt die Funktionen * cls(), * scroll_up(), scroll_down(), * set_cur(), get_cur(), * set_screen_page(), get_screen_page() * * Die Prototypen dieser Funktionen befinden sich in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #include "bio.h" #define VIDEO_INT 0x10 typedef unsigned char BYTE; void scroll_up( int anzahl, int anf_zeile, int end_zeile) { /* Fenster hoch rollen. */ union REGS intregs; intregs.x.ax = 0x600 + anzahl; /* Subfunktion AH = 6, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void scroll_down( int anzahl, int anf_zeile, int end_zeile) { /* Fenster runter rollen. */ union REGS intregs; intregs.x.ax = 0x700 + anzahl; /* Subfunktion AH = 7, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void set_cur( int zeile, int spalte) /* versetzt den Cursor */ { /* der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 2; intregs.h.dh = (BYTE)zeile; intregs.h.dl = (BYTE)spalte; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); } void get_cur(int *zeile, int *spalte) /* holt die Cursor- */ { /* Position der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 3; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); *zeile = (unsigned)intregs.h.dh; *spalte = (unsigned)intregs.h.dl; } void cls(void) { scroll_up(0,0,24); /* Gesamten Bildschirm loeschen. */ set_cur(0,0); /* Cursor in Home-Position. */ } int get_screen_page(void) /* Aktuelle Bildschirmseite holen.*/ { union REGS intregs; intregs.h.ah = 15; /* Subfunktion AH = 15: */ /* Bildschirm-Modus feststellen. */ int86(VIDEO_INT, &intregs, &intregs); return (intregs.h.bh); } void set_screen_page(int seite) /* setzt die aktive Seite des */ { /* Bildschirmpuffers auf die */ /* angegebene Seite. */ union REGS intregs; intregs.x.ax = 0x500 + seite; /* Subfunktion AH = 5 */ int86(VIDEO_INT, &intregs, &intregs); } /* ------------------------------------------------------------- Ein kleines Testprogramm : */ /* #include <stdio.h> int main() { cls(); set_cur(23, 0); printf("Weiter mit <Return>\n"); set_cur(12, 20); printf("Ein Test!\n"); getchar(); scroll_up(3, 5, 20); getchar(); scroll_down(6, 5, 20); getchar(); set_screen_page(1); printf("\nAuf der 2. Seite !\n"); getchar(); set_screen_page(0); set_cur(0,0); printf("\nWieder auf der 1. Seite !\n"); getchar(); cls(); return 0; } */ /* Video.c --> Enthaelt die Funktionen * cls(), * scroll_up(), scroll_down(), * set_cur(), get_cur(), * set_screen_page(), get_screen_page() * * Die Prototypen dieser Funktionen befinden sich in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #include "bio.h" #define VIDEO_INT 0x10 typedef unsigned char BYTE; void scroll_up( int anzahl, int anf_zeile, int end_zeile) { /* Fenster hoch rollen. */ union REGS intregs; intregs.x.ax = 0x600 + anzahl; /* Subfunktion AH = 6, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void scroll_down( int anzahl, int anf_zeile, int end_zeile) { /* Fenster runter rollen. */ union REGS intregs; intregs.x.ax = 0x700 + anzahl; /* Subfunktion AH = 7, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void set_cur( int zeile, int spalte) /* versetzt den Cursor */ { /* der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 2; intregs.h.dh = (BYTE)zeile; intregs.h.dl = (BYTE)spalte; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); } void get_cur(int *zeile, int *spalte) /* holt die Cursor- */ { /* Position der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 3; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); *zeile = (unsigned)intregs.h.dh; *spalte = (unsigned)intregs.h.dl; } void cls(void) { scroll_up(0,0,24); /* Gesamten Bildschirm loeschen. */ set_cur(0,0); /* Cursor in Home-Position. */ } int get_screen_page(void) /* Aktuelle Bildschirmseite holen.*/ { union REGS intregs; intregs.h.ah = 15; /* Subfunktion AH = 15: */ /* Bildschirm-Modus feststellen. */ int86(VIDEO_INT, &intregs, &intregs); return (intregs.h.bh); } void set_screen_page(int seite) /* setzt die aktive Seite des */ { /* Bildschirmpuffers auf die */ /* angegebene Seite. */ union REGS intregs; intregs.x.ax = 0x500 + seite; /* Subfunktion AH = 5 */ int86(VIDEO_INT, &intregs, &intregs); } /* ------------------------------------------------------------- Ein kleines Testprogramm : */ /* #include <stdio.h> int main() { cls(); set_cur(23, 0); printf("Weiter mit <Return>\n"); set_cur(12, 20); printf("Ein Test!\n"); getchar(); scroll_up(3, 5, 20); getchar(); scroll_down(6, 5, 20); getchar(); set_screen_page(1); printf("\nAuf der 2. Seite !\n"); getchar(); set_screen_page(0); set_cur(0,0); printf("\nWieder auf der 1. Seite !\n"); getchar(); cls(); return 0; } */ /* BIO.H --> Enthaelt die Prototypen der BIOS-Funktionen. */ /* --- Funktionen in VIDEO.C --- */ extern void scroll_up(int anzahl, int anf_zeile,int end_zeile); extern void scroll_down(int anzahl, int anf_zeile, int end_zeile); extern void set_cur(int zeile, int spalte); extern void get_cur(int *zeile, int *spalte); extern void cls(void); extern int get_screen_page(void); extern void set_screen_page(int page); /* --- Funktionen in GETCB.C / PUTCB.C --- */ extern int getcb(void); extern void putcb(int c); extern void putcb9(int c, unsigned count, unsigned modus); extern void balken(int zeile, int spalte, int laenge, int c, unsigned modus); extern int input(char *puffer, int max,... ); need your help, can't find my mistakes:((

Read the article

FreeBSD performance tuning. Sysctls, loader.conf, kernel

- by SaveTheRbtz

I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

Read the article

Cocos2d-xna memory management for WP8

- by Arkiliknam

I recently upgraded to VS2012 and try my in dev game out on the new WP8 emulators but was dismayed to find out the emulator now crashes and throws an out of memory exception during my sprite loading procedure (funnily, it still works in WP7 emulators and on my WP7). Regardless of whether the problem is the emulator or not, I want to get a clear understanding of how I should be managing memory in the game. My game consists of a character whom has 4 or more different animations. Each animation consists of 4 to 7 frames. On top of that, the character has up to 8 stackable visualization modifications (eg eye type, nose type, hair type, clothes type). Pre memory issue, I preloaded all textures for each animation frame and customization and created animate action out of them. The game then plays animations using the customizations applied to that current character. I re-looked at this implementation when I received the out of memory exceptions and have started playing with RenderTexture instead, so instead of pre loading all possible textures, it on loads textures needed for the character, renders them onto a single texture, from which the animation is built. This means the animations use 1/8th of the sprites they were before. I thought this would solve my issue, but it hasn't. Here's a snippet of my code: var characterTexture = CCRenderTexture.Create((int)width, (int)height); characterTexture.BeginWithClear(0, 0, 0, 0); // stamp a body onto my texture var bodySprite = MethodToCreateSpecificSprite(); bodySprite.Position = centerPoint; bodySprite.Visit(); bodySprite.Cleanup(); bodySprite = null; // stamp eyes, nose, mouth, clothes, etc... characterTexture.End(); As you can see, I'm calling CleanUp and setting the sprite to null in the hope of releasing the memory, though I don't believe this is the right way, nor does it seem to work... I also tried using SharedTextureCache to load textures before Stamping my texture out, and then clearing the SharedTextureCache with: CCTextureCache.SharedTextureCache.RemoveAllTextures(); But this didn't have an effect either. Any tips on what I'm not doing? I used VS to do a memory profile of the emulation causing the crash. Both WP7.1 and WP8 emulators peak at about 150mb of usage. WP8 crashes and throws an out of memory exception. Each customisation/frame is 15kb at the most. Lets say there are 8 layers of customisation = 120kb but I render then onto one texture which I would assume is only 15kb again. Each animation is 8 frames at the most. That's 15kb for 1 texture, or 960kb for 8 textures of customisation. There are 4 animation sets. That's 60Kb for 4 sets of 1 texture, or 3.75MB for 4 sets of 8 textures of customisation. So even if its storing every layer, its 3.75MB.... no where near the 150mb breaking point my profiler seems to suggest :( WP 7.1 Memory Profile (max 150MB) WP8 Memory Profile (max 150MB and crashes)

Read the article

Creating PDF documents dynamically using Umbraco and XSL-FO part 2

- by Vizioz Limited

Since my last post I have made a few modifications to the PDF generation, the main one being that the files are now dynamically renamed so that they reflect the name of the case study instead of all being called PDF.PDF which was not a very helpful filename, I just wanted to get something live last week, so decided that something was better than nothing :)The issue with the filenames comes down to the way that the PDF's are being generated by using an alternative template in Umbraco, this means that all you need to do is add " /pdf " to the end of a case study URL and it will create a PDF version of the case study. The down side is that your browser will merrily download the file and save it as PDF.PDF because that is the name of the last part of the URL.What you need to do is set the content-disposition header to be equal to the name you would like the file use, Darren Ferguson mentioned this on the Change the name of the PDF forum post.We have used the same technique for downloading dynamically generated excel files, so I thought it would be useful to create a small macro to set both this header and also to set the caching headers to prevent any caching issues, I think in the past we have experienced all possible issues, including various issues where IE behaves differently to other browsers when you are using SSL and so the below code should work in all situations!The template for the PDF alternative template is very simple:<%@ Master Language="C#" MasterPageFile="~/umbraco/masterpages/default.master" AutoEventWireup="true" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolderDefault" runat="server"> <umbraco:Macro Alias="PDFHeaders" runat="server"></umbraco:Macro> <umbraco:Macro xsl="FO-CaseStudy.xslt" Alias="PDFXSLFO" runat="server"></umbraco:Macro></asp:Content>The following code snippet is the XSLT macro that simply creates our file name and then passes the file name into the helper function:<xsl:template match="/"> <xsl:variable name="fileName"> <xsl:text>Vizioz_</xsl:text> <xsl:value-of select="$currentPage/@nodeName" /> <xsl:text>_case_study.pdf</xsl:text> </xsl:variable> <xsl:value-of select="Vizioz.Helper:AddDocumentDownloadHeaders('application/pdf', $fileName)"/> </xsl:template>And the following code is the helper function that clears the current response and adds all the appropriate headers:public static void AddDocumentDownloadHeaders(string contentType, string fileName){ HttpResponse response = HttpContext.Current.Response; HttpRequest request = HttpContext.Current.Request; response.Clear(); response.ClearHeaders(); if (request.IsSecureConnection & request.Browser.Browser == "IE") { // Don't use the caching headers if the browser is IE and it's a secure connection // see: http://support.microsoft.com/kb/323308 } else { // force not using the cache response.AppendHeader("Cache-Control", "no-cache"); response.AppendHeader("Cache-Control", "private"); response.AppendHeader("Cache-Control", "no-store"); response.AppendHeader("Cache-Control", "must-revalidate"); response.AppendHeader("Cache-Control", "max-stale=0"); response.AppendHeader("Cache-Control", "post-check=0"); response.AppendHeader("Cache-Control", "pre-check=0"); response.AppendHeader("Pragma", "no-cache"); response.Cache.SetCacheability(HttpCacheability.NoCache); response.Cache.SetNoStore(); response.Cache.SetExpires(DateTime.UtcNow.AddMinutes(-1)); } response.AppendHeader("Expires", DateTime.Now.AddMinutes(-1).ToLongDateString()); response.AppendHeader("Keep-Alive", "timeout=3, max=993"); response.AddHeader("content-disposition", "attachment; filename=\"" + fileName + "\""); response.ContentType = contentType;}I will write another blog soon with some more details about XSL-FO and how to create the PDF's dynamically.Please do re-tweet if you find this interest :)

Read the article

Silverlight Cream for March 26, 2010 -- #821

- by Dave Campbell

In this Issue: Max Paulousky, Christian Schormann, John Papa, Phani Raj, David Anson(-2-, -3-), Brad Abrams(-2-), and Jeff Wilcox(-2-, -3-). Shoutouts: Jeff Wilcox posted his material from mix and some preview TestFramework bits: Unit Testing Silverlight & Windows Phone Applications – talk now online At MIX10, Jeff Wilcox demo'd an app called "Peppermint"... here's the bleeding edge demo: “Peppermint” MIX demo sources Erik Mork and Co. have put out their weekly This Week In Silverlight 3.25.2010 Brad Abrams has all his materials posted for his MIX10 session Mix2010: Search Engine Optimization (SEO) for Microsoft Silverlight... including play-by-play of the demo and all source. Do you use Rooler? Well you should! Watch a video Pete Brown did with Pete Blois on Expression Blend, Windows Phone, Rooler Interested in Silverlight and XNA for WP7? Me too! Michael Klucher has a post outlining the two: Silverlight and XNA Framework Game Development and Compatibility From SilverlightCream.com: Modularity in Silverlight Applications - An Issue With ModuleInitializeException Max Paulousky has a truly ugly error trace listed by way of not having a reference listed, and the obvious simple solution. Next time he'll talk about the difficult situations. Using SketchFlow to Prototype for Windows Phone Christian Schormann has a tutorial up on using Expression Blend to develop for WP7 ... who better than Christian for that task?? Silverlight TV 18: WCF RIA Services Validation John Papa held forth with Nikhil Kothari on WCF RIA Services and validation just prior to MIX10, and was posted yesterday. Building SL3 applications using OData client Library with Vs 2010 RC Phani Raj walks through building an OData consumer in SL3, the first problem you're going to hit, and the easy solution to it. Tip: When creating a DependencyProperty, follow the handy convention of "wrapper+register+static+virtual" David Anson has a couple more of his 'Tips' up... this first is about Dependency Properties again... having a good foundation for all your Dependency Properties is a great way to avoid problems. Tip: Do not assign DependencyProperty values in a constructor; it prevents users from overriding them In the next post, David Anson talks about not assigning Dependency Property values in a constructor and gives one of the two ways to get around doing so. Tip: Set DependencyProperty default values in a class's default style if it's more convenient In his latest post, David Anson gives the second way to avoid setting a Dependency Property value in the constructor. Silverlight 4 + RIA Services - Ready for Business: Search Engine Optimization (SEO) Brad Abrams Abrams adds SEO to the tutorial series he's doing. He begins with his PDC09 session material on the subject and then takes off on a great detailed tutorial all with source. Silverlight 4 + RIA Services - Ready for Business: Localizing Business Application Brad Abrams then discusses localization and Silverlight in another detailed tutorial with all code included. Silverlight Toolkit and the Windows Phone: WrapPanel, and a few others Jeff Wilcox has a few WP7 posts I'm going to push today. This first is from earlier this week and is about using the Toolkit in WP7 and better than that, he includes the bits you need if all you want is the WrapPanel Data binding user settings in Windows Phone applications In the next one from yesterday, Jeff Wilcox demonstrates saving some user info in Isolated Storage to improve the user experience, and shares all the necessary plumbing files, and other external links as well. Displaying 2D QR barcodes in Windows Phone applications In a post from today, Jeff Wilcox ported his Silverlight 2D QR Barcode app from last year into WP7 ... just very cool... get the source and display your Microsoft Tag. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Silverlight Cream for March 23, 2010 -- #818

- by Dave Campbell

In this Issue: Max Paulousky, Jeremy Likness, Mark Tucker, Christian Schormann, Page Brooks, Brad Abrams(-2-), Jeff Wilcox, Unnir, Bea Stollnitz, John Papa and Adam Kinney, and Bill Reiss(-2-). Shoutouts: Ashish Shetty posted his material from his MIX10 presentation: Stepping outside the browser with Silverlight 4 Not Silverlight, but dang useful, Karl Shifflett posted a Visual Studio 2010 XAML Editor IntelliSense Presenter Extension Yavor Georgiev posted his MIX10 material: Two samples from today's MIX talk From SilverlightCream.com: GroupBox Sketching Control for WPF applications Using Blend Max Paulousky creates a GroupBox control for SketchFlow for WPF. He includes a link to an example of doing the same for Silverlight. Sequential Asynchronous Workflows in Silverlight using Coroutines Jeremy Likness' latest post begann with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 resulting in the use of Wintellect's PowerThreading library (downloadable), and Coroutines. Windows Phone 7 UI Templates Mark Tucker has been putting a lot of thought into WP7 apps and produced 5 templates for building apps, downloadable in PowerPoint format. He's also looking to discuss this concept. Blend 4: About Path Layout, Part I Christian Schormann has a great tutorial up about Expression Blend 4 and path layout ... this is lots of great info, and it's only part 1! Custom Splash Screen for Windows Phone Page Brooks makes very quick work of showing how to add a splash screen to your WP7 app... very nice, Page! Silverlight 4 + RIA Services - Ready for Business: Exposing Data from Entity Framework Brad Abrams next post in the series is is on pulling your data from wherever it lives, and uses a DomainService to shape it for your Silverlight app. Silverlight 4 + RIA Services - Ready for Business: Consuming Data in the Silverlight Client Brad Abrams then discusses consuming that data in a Silverlight app. Not much code involvement at all.. great ROI :) Building Silverlight 3 and Silverlight 4 applications on a .NET 3.5 build machine Jeff Wilcox talks about building Silverlight 3 and Silverlight 4B both on a .NET 3.5 machine. He then adds in the Toolkit, and even WCF RIA Services. Expression Blend 4 - XAML generation tweaks Unnir demonstrates a few changes to Expression Blend 4 that produce more compact XAML. He's also asking for other examples you'd like to see tightened up. How can I sort a hierarchy? Bea Stollnitz posts plausible solutions to sorting data items at each level of a hierarchical UI, with descriptions of why they don't work, followed by the real deal... Silverlight and WPF. Silverlight Training Course (Silverlight 4) John Papa and Adam Kinney have posted a huge body of work to get us up-to-speed on Silverlight 4 -- a WhitePaper, hands-on labs, and an 8-unit course with 25 accompanying videos... geez... Silverlight game development on Windows Phone 7 Bill Reiss has a post up discussing game development on WP7 in general and then discusses his SilverSprite library, with a link to it. XNA or Silverlight for Windows Phone 7 game development? Bill Reiss next discusses the advantage of using Silverlight or XNA for your WP7 game development, and who better to discuss both? Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Search Results

Search found 5134 results on 206 pages for 'max pollack'.

Page 77/206 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84 | Next Page >

- by Qben

- by codeHead

- by Hoff

- by Hussein Fawzy

- by greg0ire

- by shamim

- by GB_J

- by Godric Seer

- by MATELIN Alexis

- by John

- by Brian J

- by fang_dejavu

- by Daemonfire3002nd

- by kNair

- by pinaldave

- by James Michael Hare

- by Phil Factor

- by Phil Factor

- by osabri

- by osabri

- by SaveTheRbtz

- by Arkiliknam

- by Vizioz Limited

- by Dave Campbell

- by Dave Campbell

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84 | Next Page >