Search Results

Search found 2704 results on 109 pages for 'miguel ping'.

Page 77/109 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Howto setup a `veth` virtual network

    - by Reinder
    I'd like to setup three virtual network interfaces (veth) which can communicate with each other. To simulate a three node cluster, each program then binds to one veth interface. I'd like to do it without LXC if possible. I tried using: Created three veth pairs: sudo ip link add type veth Created a bridge sudo brctl addbr br0 Added one of each pair to the bridge: sudo brctl addif br0 veth1 sudo brctl addif br0 veth3 sudo brctl addif br0 veth5 Configured the interfaces: sudo ifconfig veth0 10.0.0.201 netmask 255.255.255.0 up sudo ifconfig veth2 10.0.0.202 netmask 255.255.255.0 up sudo ifconfig veth4 10.0.0.203 netmask 255.255.255.0 up Then I verified if is works using: ping -I veth0 10.0.0.202 but it doesn't :( The I added IP addresses to the veth1,veth3,veth5 and br0 interfaces in the 10.0.1.x/24 range. But that doesn't help. Any ideas? or a guide, all I find in how to use it with LXC. Or am I trying something that isn't possible?

    Read the article

  • Ubuntu Wired network(ethernet does not work)

    - by badnaam
    It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

    Read the article

  • Home Wifi: wireless laptop cannot RDC to wired desktop (both windows 7)

    - by James_Smith
    Hi, Both laptop and desktop are connected to same wifi router. desktop is connected through wire and laptop is on wifi. Both Pcs are running windows 7 and can ping each other and are in same workgroup. When I try to RDC my desktop on my laptop, it connects to the desktop and shows the windows credentials screen. An admin user (J) with same password exists on both PCs. But it gives an error "the user name or password is incorrect" However when I RDC the laptop FROM desktop using the above steps..it works perfectly wel! The same credentials issue comes with Shared folders. What am I doing wrong?

    Read the article

  • IIS: Can't access my site

    - by Markus
    Hi I have Windows 7 Professional. With IIS 7 or 7.5 I have set up a little website. So far all works fine on http://Localhost:80 - I can see the site. Then I set up the firewall so port 80 is open. My Router routes TCP:80 to my pc. But from my second pc I cant access the site. I can ping the other pc but why I can't access the page through the LAN? Please help!

    Read the article

  • Why can't I access a webserver through a load balancer on my local network?

    - by Karptonite
    When I try to use curl (or wget, lynx, etc) to connect from a server on our local network to our website, which is on a local server behind a CoyotePoint load balancer, curl fails. Ping does not have this problem. When I curl directly to any of the servers behind that load balancer (from and to the same local network), I also have no problem. It doesn't matter whether the local server I'm curling from is behind the load balancer or not. Does anyone have any idea why I can't access my webserver through the load balancer on my local network?

    Read the article

  • Sync Linux to Windows 2003/2008 Natively

    - by user26753
    Without using any external packages for Windows, can Linux synchronise it's clock to a Windows 03/08 Server natively? I've tried it using various NTP packages for Windows but would like to use just Windows software for this. EDIT: I've tried the below however it doesn't work. I've put TimeSource in /etc/hosts, stated server TimeSource in /etc/ntp.conf however when I do a service ntpd start it doesn't sync (it's 3 minutes out at the minute). I then stopped the NTPD and did a ntpdate TimeSource, thinking it would sync and then I'd start the NTPD once it's got the time, and it says: no server suitable for synchronization found. Though I can ping it. Any thoughts?

    Read the article

  • Problem with the hosts file in Windows XP

    - by waldev
    I have a computer with Windows XP SP2 with a weird problem. The hosts file doesn't work. No matter what I do, adding or removing entries in the file doesn't make any difference, pinging the added names times out. I tried flushing the DNS cache (using ipconfig /flushdns) but that didn't work, I even tried to restart the DNS client service but that made no difference too. Removing entries also has no effect, I ping the names and I get a reply. Help!!! Edit: Thanks for your answer guys, but the problem is more complicated than this. It seems I'll have to reinstall Windows.

    Read the article

  • Destination host unreachable

    - by user1010101
    I have 2 router connected to 1 switch which contains two vlans, 1 router has the ip table of vlan1 and the other router have the ip table of vlan2 I have trunked both router cable to the switch. I have set 1 ip table per router which correspond to the ip address of the PC that have this router address as a gateway. When I ping from 192.168.100.2 to 192.168.200.2 it tells me that destination host is unreachable and the message is from the router 192.168.100.1. So I guess router for 192.168.100.x does not see the router for 192.168.200.x , right ? Or am I wrong ? What are good troubleshooting steps ? http://i.imgur.com/b94Ir.png is the representation of the network, i cannot post image since im not reputated enough.

    Read the article

  • Script to restart BlackBerry services

    - by ICTdesk.net
    Can somebody give me a script advice/example of how to restart services? I have to restart 17 services, but the first 4 services have to be in the right order and after the restart command is given to one of the services, the next one should be started when the previous one is finished. I know I can restart a service by net command, and I can build a delay by for example a ping command that repeats for an x amount of times, but I never know in advance how long it is going to take for a service to restart. Thanks, Kindest regards, Marcel

    Read the article

  • SFTP sending files between laptops on Ubuntu

    - by twigg
    I want to transfer files between two Ubuntu systems using SFTP. I have got it set-up and I can connect to the other laptop, ping it and see its file list using sftp> dir. I can see the files on the other system. But when I call get filename.deb it comes up saying Fetching /home/user/filename.deb to filename.deb 0% 0 0.0KB/s --:-- ETA and then drops back to the sftp command promote without transferring anything. Have I missed something?

    Read the article

  • Vista Home Premium won't connect to network.

    - by Ice
    I deinstalled some software (e.g. some Toolbars for IE and Norton security suite, because the free trial period of 60 days is run out and so i want to switch to microsofts free security essentials). But now i cannot connect to the network again: Neither over LAN nor over WiFi. Neither with standard DHCP ON (sets a 169.254.x.y address) nor with fixed IP-Address. No error during changing the settings. Ping to the Gateway e.g. doesn't work and gives "generall failure". The DHCP-Client sets no IP-Address. There is allways only 'local access' on every network-connection. i ran out of ideas, please help. UPDATE per 2011-03-11: I followed each and every hint but nothing changed. I did a research on microsofts homepage through all the sites belonging to network but nothing helped. What can i do next?

    Read the article

  • Name-based virtual hosting in Apache

    - by malvikus
    I'd like to set up name-based virtual hosting in Apache, but I don't have DNS name (local private network). Thus I want to get something like that: http://192.168.0.1/wiki - First virtual host - wiki. http://192.168.0.1/redmine - Second virtual host - redmine. As I suggest I can be achievable by using ServerName option in section of both vhosts. But in Apache documentation has no mention that I can use for FQDN IP-addr. Is it possible? How can I reach my wishes? P.S.: I want to share my sites on the same subnet only. Thus any who can ping me can enter http://my_ip/wiki and get wiki, http://my_ip/redmine and get redmine.

    Read the article

  • Virtualbox share guest (windows xp) printer to host(linux)

    - by M0E-lnx
    I have a weird situation. I own a printer that has 0 support in linux, but of course, it works in windows. So I have installed VirtualBox 3.1.2 with guest additions to provide access to my usb devices. I have successfully setup the printer and the guest os can print fine. Now, the question is: Is there any way to make this printer accessible to the host OS? I noticed that the guest OS takes an ip address of 10.0.2.15, but when I try to ping that address from the linux host, it goes nowhere. No response. Has anyone here done this before? can anyone think of a way to do this?

    Read the article

  • IIS is not accepting connections after WIndows system update

    - by user78102
    I've been running a web site for the past year on Windows Home Server 2008 R2. After the March 2012 system updates, the site is no longer accessible to clients. They see this error: website is online but isn't accepting connections. Ping tests to the FQDN of the server are successful and NSLOOKUP returns the correct result. The Internet connection tests out good from the server. I have not changed my internet connection (Comcast Business Internet) or my router configuration (I forward incoming requests from the outside to port 80 of the local IP address of the server). I have tried: Disabling the Windows Firewall. Rebuilding the OS and configuration. I still have the problem. How can I resolve this?

    Read the article

  • Realtime website slowness (PHP/MYSQL)

    - by 3s2ng
    We got a website with realtime transactions. The past few days we experienced some slowness during a period of time. Usually the slowness last for 5 minutes. And also during the slowness we noticed that sometimes we can not connect to SSH and FTP or sometimes very slow to connect to those services. Currently we are trying to identify the issue. We already setup database monitoring tool. Now are about to signup with pingdom.com My question is. If the website is too slow due to the database (table or row lock) will it affect the other services like SSH and FTP? Does the ping correlates the page load and the connection between my PC and server? Thanks, Mark

    Read the article

  • CentOS running inside VMware as WebServer times out on outside connection [migrated]

    - by Tom Hart
    I have a CentOS machine running inside VMware, and I have got PHP and Apache set up on it, so if I open a browser (on the VM) and go to either localhost, or 192.168.0.3, I get a phpinfo page I made in /var/www/html/index.php, but, if on the host (Windows 7), in my browser I go to 192.168.0.3, it times out. I can ping the IP address from Windows and get a response, I just can't through the browser. Does anyone have any ideas what I need to do to get this working? This is my first time using a VM and I'm getting lost in the network settings.

    Read the article

  • nagios service check

    - by DRH
    I am new to nagios and we have a small issue I need to ask assistance with. Many of the machines that we monitor can go unresponsive for a bit when some very intensive cpu tasks are run. This makes nagios send warnings and alerts while these hosts are busy reporting things like 'ping timeout' or 'zombie processes' and even swap space warnings, but in actuality there is not a problem. Is there a way to configure nagios to not send such alerts, but check x number of times over a period of time and only then send an alert at the end of that time if the server in question has not recovered?. Looking at the commands.cfg file, I see entries like this: define command{ command_name check_local_swap command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$ } How could I modify this example to accomplish what I want above. Thanks

    Read the article

  • connection prob

    - by user56944
    Hey guys I use Clear internet ie wireless to get my connection. I play a game online Eve Online which has had on and off CTD(crash to desktop) due to the connection timing out. Usually I have trouble only late at night after work but today I had no connection at 4 pm. They ran a trace route and Im using Ping plotter to do a trace in real time. I have 100% packet loss at hop 2 and Im getting varible loss at hop 6 at ae-72-70.ebr2.Dallas1.Level3.net Also had windows send a dump to Microsoft mentioning the eve file has a problem requiring it to close. Any thoughts ? TIA!

    Read the article

  • Printer on different network(IP range), can i print to it?

    - by John
    Heres my situation, client PC is on the same network as the printer to start with: 192.168.1.X Thats fine and printing is fine, however our clients are required to connect to the VPN using the installed cisco client - this creates a virtual adapter and now the PC is connected to a 10.0.0.X IP range and can no longer see the printer, thus my problem! If I do an IPCONFIG/ALL the PC still has the 192.168.1.X address but it I can't ping anything on it. Is it possible to use both IP ranges at the same time?

    Read the article

  • Weird XPath behavior in libxml2

    - by Josh K
    I have this XML tree that looks like this (I've changed the tag names but if you're really clever you may figure out what I'm actually doing.) <ListOfThings> <Thing foo:action="add"> <Bar>doStuff --slowly</Bar> <Index>1</Index> </Thing> <Thing foo:action="add"> <Bar>ping yourMother.net</Bar> <Index>2</Index> </Thing> </ListOfThings> With libxml2, I want to programmatically insert a new Thing tag into the ListOfThings with the Index being the highest current index, plus one. I do it like this (sanity checking removed for brevity): xpath = "//urn:myformat[@foo='bar']/" "urn:mysection[@name='baz']/" "urn:ListOfThings/urn:Thing/urn:Index"; xpathObj = xmlXPathEvalExpression(xpath, xpathCtx); nodes = xpathObj->nodesetval; /* Find last value and snarf the value of the tag */ highest = atoi(nodes->nodeTab[nodes->nodeNr - 1]->children->content); snprintf(order, sizeof(order), "%d", highest + 1); /* highest index plus one */ /* now move up two levels.. */ cmdRoot = nodes->nodeTab[nodes->nodeNr - 1]; ASSERT(cmdRoot->parent && cmdRoot->parent->parent); cmdRoot = cmdRoot->parent->parent; /* build the child tag */ newTag = xmlNewNode(NULL, "Thing"); xmlSetProp(newTag, "foo:action", "add"); /* set new node values */ xmlNewTextChild(newTag, NULL, "Bar", command); xmlNewChild(newTag, NULL, "Index", order); /* append this to cmdRoot */ xmlAddChild(cmdRoot, newTag); But if I call this function twice (to add two Things), the XPath expression doesn't catch the new entry I made. Is there a function I need to call to kick XPath in the shins and get it to make sure it really looks over the whole xmlDocPtr again? It clearly does get added to the document, because when I save it, I get the new tags I added. To be clear, the output looks like this: <ListOfThings> <Thing foo:action="add"> <Bar>doStuff --slowly</Bar> <Index>1</Index> </Thing> <Thing foo:action="add"> <Bar>ping yourMother.net</Bar> <Index>2</Index> </Thing> <Thing foo:action="add"> <Bar>newCommand1</Bar> <Index>3</Index> </Thing> <Thing foo:action="add"> <Bar>newCommand2</Bar> <Index>3</Index> <!-- this is WRONG! --> </Thing> </ListOfThings> I used a debugger to check what happened after xmlXPathEvalExpression got called and I saw that nodes->nodeNr was the same each time. Help me, lazyweb, you're my only hope!

    Read the article

  • Internet Explorer background-color hover problem

    - by danilo
    I have a strange Problem with table formating using IE 7. My table looks like this: In IE, when using border-collapse, the borders don't get displayed correctly. That's why I used this fix: .table-vmlist td { border-top: 1px solid black; } td.col-vm-status, tr.row-details td { border-left: 1px solid black; } td.col-vm-rdp, tr.row-details td { border-right: 1px solid black; } .table-vmlist { border-bottom: 1px solid black;} When hovering over the row, it gets highlighted with CSS: .table-vmlist tr.row-vm { background-color: #A4C3EF; } .table-vmlist tr.row-vm:hover { background-color: #91BAEF; } Now, in IE 7, when moving the mouse from the top to the bottom of the list, every row gets highlighted correctly and no problems happen. But if I move my mouse pointer from the bottom of the list to the top, every second row seems to loose the border. Can someone explain what the problem is, and how to solve it? This is my markup: <tr class="row-vm"> <td class="col-vm-status status-1"><img title="Host Down" alt="Down" src="/Technik/vm-management/img/hoststatus_1.png"></td> <td class="col-vm-name">V1-VM-1</td> <td class="col-vm-stati"> <img title="Ping" alt="Ping status" src="/Technik/vm-management/img/servicestatus_3.png"> <img title="CPU" alt="CPU status" src="/Technik/vm-management/img/servicestatus_3.png"> <img title="RAM" alt="RAM status" src="/Technik/vm-management/img/servicestatus_3.png"> <img title="C:\ Diskspace" alt="Disk space status" src="/Technik/vm-management/img/servicestatus_3.png"> </td> <td class="col-vm-owner">kus</td> <td class="col-vm-purpose">Citrix Testserver</td> <td class="col-vm-ip">-</td> <td class="col-vm-uptime">-</td> <td class="col-vm-rdp">&nbsp;</td> </tr> And the CSS: /* VM-Tabelle formatieren */ .table-vmlist { border-collapse: collapse; } .table-vmlist tr { border: 1px solid black; } .table-vmlist tr.row-header { border: none; } .table-vmlist tr.row-vm { background-color: #A4C3EF; } .table-vmlist tr.row-vm:hover { background-color: #91BAEF; } .table-vmlist th { text-align: left; } .table-vmlist td { } .table-vmlist th, table td { padding: 2px 0px; } /* Spaltenbreite der VM-Tabelle festlegen */ .table-vmlist #col-status { width: 25px; } .table-vmlist #col-stati { width: 90px; } .table-vmlist #col-owner { width: 90px; } .table-vmlist #col-ip { width: 100px; } .table-vmlist #col-uptime { width: 70px; } .table-vmlist #col-rdp { width: 25px; } .table-vmlist tr.row-details td { padding: 0px 10px; } /* Kein Rahmen um verlinkte Bilder */ a img { border-width: 0px; } /* Für Einschaltknopf Hand-Cursor anstatt normalen Pfeil anzeigen */ td.status-1 img { cursor: pointer; } img.ajax-loader { margin-left: 2px; } IE fix: .table-vmlist td { border-top: 1px solid black; } td.col-vm-status, tr.row-details td { border-left: 1px solid black; } td.col-vm-rdp, tr.row-details td { border-right: 1px solid black; } .table-vmlist { border-bottom: 1px solid black;}

    Read the article

  • Why doesn't PHP's oci_connect return false?

    - by absolethe
    I have a situation in which we have two production databases that synchronize with one other. Server One is considered the primary. Sometimes due to maintenance or a disaster Server Two will become primary. In some of our code that means we have to manually go in and edit the server name for database connections. I find this annoying, so the last thing I wrote I put the server information for both and set up a loop. If oci_connect failed on the Server One 3 times it would move on to Server Two. If Server Two failed 3 times it would notify the user a connection couldn't be made. This has worked fine most times we've had the situation of switching the servers. Yesterday, for example, it worked fine. Today it didn't. It just sat and spun endlessly. No error in the PHP error log. No failure to move on from. No error output to the screen. Nothing for 5 minutes. So then I had to manually edit the stupid config file. I asked what could possibly be different and I was told "yesterday the database was down, but not the server. today the server is down." Okay...? But I don't see a distinction. I would expect oci_connect to return false if it can't establish any sort of communication with the server. I'd expect it to timeout and error. Not just pass it on when it receives an error code from the server. What if there's a network problem, for example? Is this a bug in oci_connect or is there a possibility that something in our PHP configuration gives oci_connect a crazily long timeout? If it is a sort of "bug" is there some way I can check to see if the server is up first? Like a ping? (Of course when I did a ping through the command prompt I got a response from Server One and then was told, "it's back now" although I am skeptical about the timing on that.) Anyway, if anyone could shed some light on why oci_connect might run endlessly without failing and how to keep it from doing so I'd be grateful. -- Edit: My code looks like the examples on PHP.net only in some loops. $count = count($servers); for($i = 0; $i < $count; $i++){ if((!isset($connection)) || ($connection == false)){ // Attempt to connect to the oracle database $connection = @oci_connect($servers[$i]["user"], $servers[$i]["pass"], $servers[$i]["conid"]) or ($conn_error = oracle_error()); // Try again if there was a failure if(($connection == false) || (isset($con_error))){ // Three (two more) tries per alternative for($j = $st; $j < $fn; $j++){ // Try again to connect $connection = @oci_connect($servers[$i]["user"], $servers[$i]["pass"], $servers[$i]["conid"]) or ($conn_error = oracle_error()); } // for($j = 2; $j < 4; $j++) } // if($connection == false) } // if(!isset($connection) || ($connection == false)) } // for($i = 0; $i < $count; $i++)

    Read the article

  • SSH main process ended

    - by Khaled
    I have a running ubuntu server 10.04.1. When I tried to login to the server via ssh, I could not. Instead, I got connection refused error. I tried to ping the machine and I got reply! So, the clear reason is that SSH daemon is stopped. After reboot, I was able to login to my server via ssh. After some time, I looked at my logs /var/log/syslog and found the following records: Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2465) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2469) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2473) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2477) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2481) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2485) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2489) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2493) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2497) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2501) terminated with status 255 Jan 16 10:57:09 myserver init: ssh respawning too fast, stopped I searched for a similar problem/solution. Some people said that this is caused by the SSH daemon trying to start before networking and they suggest to change ListenAddress in /etc/ssh/sshd_config to be 0.0.0.0. I think this is not the cause in my case, because my problem occurs after system is up and running. Any idea what is causing this? This is ubuntu server and it should be running and accessed remotely using ssh.

    Read the article

  • CodePlex Daily Summary for Monday, March 01, 2010

    CodePlex Daily Summary for Monday, March 01, 2010New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds S...AWS SimpleDB Browser: A basic GUI browser tool for inspection and querying of a SimpleDB.Desktop Dimmer: A simple application for dimming the desktop around windows, videos, or other media.Disk Defuzzer: Compare chaos of files and folders with customizable SQL queries. This little application scans files in any two folders, generates data in an A...Dynamic Configuration: Dynamic configuration is a (very) small library to provide an API compatible replacement for the System.Configuration.ConfigurationManager class so...Expression Encoder 3 Visual Basic Samples: Visual Basic Sample code that calls the Expression Encoder 3 object model.Extended Character Keyboard: An lightweight onscreen keyboard that allows you to enter special characters like "á" and "û". Also supports adding of 7 custom buttons.FileHasher: This project provides a simple tool for generating and verifying file hashes. I created this to help the QA team I work with. The project is all C#...Fluent Assertions: Fluent interface for writing more natural specifying assertions with more clarity than the traditional assertion syntax such as offered by MSTest, ...Foursquare BlogEngine Widget: A Basic Widget for BlogEngine which displays the last foursquare Check-insGraffiti CMS Events Plugin: Plugin for Graffiti CMS that allows creating Event posts and rendering an Event CalendarHeadCounter: HeadCounter is a raid attendance and loot tracking application for World of Warcraft.HRM Core (QL Nhan Su): This is software about Human Resource Management in Viet Nam ------------ Đây là phần mềm Quản lý nhân sự tiền lương ở Việt Nam (Nghiệp vụ ở Việt Nam)IronPython Silverlight Sharpdevelop Template: This IronPython Silverlight SharpDevelop Template makes it easier for you to make Silverlight applications in IronPython with Sharpdevelop.kingbox: my test code for study vs 2005link_attraente: Projeto Conclusão de CursoORMSharp.Net: ORMSharp.Net https://code.google.com/p/ormsharp/ http://www.sqlite.org/ http://sqlite.phxsoftware.com/ http://sourceforge.net/projects/sqlite-dotnet2/Orz framework: Orz framework is more like a helpful library, if you are develop with DotNet framework 3.0, it will be very useful to you. Orz framework encapsul...OTManager: OTManagerSharePoint URL Ping Tool: The Url Ping Tool is a farm feature in SharePoint that provide additional performance and tracing information that can be used to troubleshoot issu...SunShine: SunShine ProjectToolSuite.ValidationExpression: assembly with regular expression for the RegularExpressionValidator controlTwitual Studio: A Visual Studio 2010 based Twitter client. Now you have one less reason for pressing Alt+Tab. Plus you still look like you're working!Velocity Hosting Tool: A program designed to aid a HT Velocity host in hosting and recording tournaments.Watermarker: Adds watermark on pictures to prevent copy. Icon taken from PICOL. Can work with packs of images.Zack's Fiasco - ASP.NET Script Includer: Script includer to * include scripts (JS or CSS) once and only once. * include the correct format by differentiating between release and build. Th...New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for ASP.NET Name ...All-In-One Code Framework (简体中文): All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Latest Download Link: http://c...AWS SimpleDB Browser: SimpleDbBrowser.zip Initial Release: The initial release of the SimpleDbBrowser. Unzip the file in the archive and place them all in a folder, then run the .exe. No installer is used...BattLineSvc: V1: First release of BattLineSvcCC.Votd Screen Saver: CC.Votd 1.0.10.301: More bug fixes and minor enhancements. Note: Only download the (Screen Saver) version if you plan to manually install. For most users the (Install...Dynamic Configuration: DynamicConfiguration Release 1: Dynamic Configuration DLL release.eIDPT - Cartão de Cidadão .NET Wrapper: EIDPT VB6 Demo Program: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.eIDPT - Cartão de Cidadão .NET Wrapper: eIDPT VB6 Demo Program Source: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.ESPEHA: Espeha 10: 1. Help available on F1 and via context menu '?' 2. Width of categiries view is preserved througb app starts 3. Drag'nd'drop for tasks view allows ...Extended Character Keyboard: OnscreenSCK Beta V1.0: OnscreenSCK Beta Version 1.0Extended Character Keyboard: OnscreenSCK Beta V1.0 Source: OnscreenSCK Beta Version 1.0 Source CodeFileHasher: Console Version v 0.5: This release provides a very basic and minimal command-line utility for generating and validating file hashes. The supported command-line paramete...Furcadia Framework for Third Party Programs: 0.2.3 Epic Wrench: Warning: Untested on Linux.FurcadiaLib\Net\NetProxy.cs: Fixed a bug I made before update. FurcadiaFramework_Example\Demo\IDemo.cs: Ignore me. F...Graffiti CMS Events Plugin: Version 1.0: Initial Release of Events PluginHeadCounter: HeadCounter 1.2.3 'Razorgore': Added "Raider Post" feature for posting details of a particular raider. Added Default Period option to allow selection of Short, Long or Lifetime...Home Access Plus+: v3.0.0.0: Version 3.0.0.0 Release Change Log: Reconfiguration of the web.config Ability to add additional links to homepage via web.config Ability to add...Home Access Plus+: v3.0.1.0: Version 3.0.1.0 Release Change Log: Fixed problem with moving File Changes: ~/bin/chs extranet.dll ~/bin/chs extranet.pdbHome Access Plus+: v3.0.2.0: Version 3.0.2.0 Release Change Log: Fixed problem with stylesheet File Changes: ~/chs.masterHRM Core (QL Nhan Su): HRMCore_src: Source of HRMCoreIRC4N00bz: IRC4N00bz v1.0.0.2: There wasn't much updated this weekend. I updated 2 'raw' events. One is all raw messages and the other is events that arn't caught in the dll. ...IronPython Silverlight Sharpdevelop Template: Version 1 Template: Just unzip it into the Sharpdevelop python templates folder For example: C:\Program Files\SharpDevelop\3.0\AddIns\AddIns\BackendBindings\PythonBi...MDownloader: MDownloader-0.15.4.56156: Fixed handling exceptions; previous handling could lead to freezing items state; Fixed validating uploading.com links;OTManager: Activity Log: 2010.02.28 >> Thread Reopened 2010.02.28 >> Re-organized WBD Features/WMBD Features 2010.02.28 >> Project status is active againPicasa Downloader: PicasaDownloader (41175): NOTE: The previous release was accidently the same as the one before that (forgot to rebuild the installer). Changelog: Fixed workitem 10296 (Sav...PicNet Html Table Filter: Version 2.0: Testing w/ JQuery 1.3.2Program Scheduler: Program Scheduler 1.1.4: Release Note: *Bug fix : If the log window is docked and user moves the log window , main window will move too. *Added menu to log window to clear...QueryToGrid Module for DotNetNuke®: QueryToGrid Module version 01.00.00: This is the initial release of this module. Remember... This is just a proof of concept to add AJAX functionality to your DotNetNuke modules.Rainweaver Framework: February 2010 Release: Code drop including an Alpha release of the Entity System. See more information in the Documentation page.RapidWebDev - .NET Enterprise Software Development Infrastructure: ProductManagement Quick Sample 0.1: This is a sample product management application to demonstrate how to develop enterprise software in RapidWebDev. The glossary of the system are ro...Team Foundation Server Revision Labeller for CruiseControl.NET: TFS Labeller for CruiseControl.NET - TFS 2008: ReleaseFirst release of the Team Foundation Server Labeller for CruiseControl.NET. This specific version is bound to TFS 2008 DLLs.ToolSuite.ValidationExpression: 01.00.01.000: first release of the time validation class; the assembly file is ready to use, the documentation ist not complete;VCC: Latest build, v2.1.30228.0: Automatic drop of latest buildWatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.7.00: Whats New FileBrowser: Non Admin Users will only see a User Sub folder (..\Portals\0\userfiles\UserName) CKFinder: Non Admin Users will only see ...Watermarker: Watermarker: first public version. can build watermark only in left top corner on one image at once.While You Were Away - WPF Screensaver: Initial Release: This is the code released when the article went live.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrBlogEngine.NETMapWindow GISCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRSLARToolkit - Silverlight Augmented Reality ToolkitDiffPlex - a .NET Diff GeneratorRapid Entity Framework. (ORM). CTP 2jQuery Library for SharePoint Web Services

    Read the article

  • CodePlex Daily Summary for Sunday, February 28, 2010

    CodePlex Daily Summary for Sunday, February 28, 2010New ProjectsESB Toolkit Extensions: ESB Extensions is a solution containing multiple .Net Projects and artifacts: Unit Tests, Itineraries, Business Rules, Binding Files, and C# Class ...Event-Based Components Binder: The Binder automatically connects output-pins to input-pins of Event-Based Components based on message type information and naming conventions. ...Haze Anti-Virus: Haze Anti-Virus is a anti virus written in C# and has features such a realtime process watching and a Process Blacklist, and is able to download Da...latex2mathml: A .NET 2.0 library written in C# which allows the conversion of LaTeX documents to XHTML+MathML format. A stand-alone converter is included. The li...Project Lyrebird: Project lyrebird is a attempt to create a all-purpose media player. It is designed to be simple, yet powerful. Its written in C#QueryToGrid Module for DotNetNuke®: This is a module that allows you to execute and display the results of T-SQL queries in DotNetNuke using your choice of AJAX grids.Reusable Library Demo: A demonstration of reusable abstractions for enterprise application developerSharePoint 2010 Conference Samples: This project contains source code from various SharePoint 2010 conferences where Scot Hillier presented.Silverlight Photo Blogger: Silverlight Photo Blogger gives you the tools you need to capture and blog about your travels in a rich and interactive web experience. Enjoy som...SMTP Test: Several times we are faced with applications that send email, the SMTP Tester principle objective is to test various possibilities of sendingSolution Tools - tools for Visual Studio solutions and projects: Solution Tools are a collection of tools that you can use with your Visual Studio Solutions and projects.New ReleasesAgile Poker Cards for Windows Mobile: Agile Poker Cards v1.1.0.0: Agile Poker Cards v1.1.0.0 Use this application to display poker cards in a planning session on a Windows Mobile device. Release notes Added new ...BuildTools - Toolset for automated builds: BuildTools 2.0 Feb 2010 Milestone: The Feb 2010 Milestone release is a complete rewrite of the old codebase in Visual Studio 2010 RC. It features MSBuild tasks for generating build v...Composure: NHibernate-Trunk-2010-02-25-VS2010.NET4 Alpha1: Recent NHibernate-Trunk conversion for Visual Studio 2010 Beta2 against .NET 4.0. Although all of the tests pass (other than the "Ignored"), this ...Employee Scheduler: Employee Scheduler 2.4: Extract the files to a directory and run Lab Hours.exe. Add an employee. Double click an employee to modify their times. Please contact me through ...ESB Toolkit Extensions: Tellago BizTalk ESB 2.0 Toolkit Extensions: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...Haze Anti-Virus: Haze Anti-Virus Binary v1.0.3: This is the Compiled version of Haze Anti-Virus, please let me know about any bugs, thanks Please Note that Database updating is currently not avai...Haze Anti-Virus: Haze Anti-Virus Source v1.0.3: This is the source for Haze Anti-VirusHOG Project: HOG Visual Studio Template: This is Visual Studio HOG Template. Created by the great tool: Solution FactoryHOG Project: Template user guide: HOW TOiTuner - The iTunes Companion: iTuner 1.1.3711: Two new features are available: the Automated Librarian and Playlist Exporter. The iTuner Automated Librarian automatically cleans the iTunes libr...johanleino.codeplex.com: SilverlightMultiLevelNavigationExample: The source code for SilverlightMultiLevelNavigationExample (VS 2010)MDownloader: MDownloader-0.15.3.56128: Fixed filefactory provider implementation after site changes.MiniTwitter: 1.09: MiniTwitter 1.09 更新内容 変更 スクロール位置がトップ以外の時は自動更新や発言時に位置を保持するように変更 タブ毎にスクロール位置が変わらないように変更 URL に ? や ! が含まれている時は短縮 URL に変換するように変更NMock3: NMock3 - Beta 4, .NET 3.5: This release includes the most current version of the NMock2 project code from Source Forge. Please start providing feedback on the tutorials. The...QueryUnit: QueryUnitPOC v. 0.0.0.7: - This version fixes problems related to the fact that in previous releases you had to specify expected values using locale-specific formats. Now e...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.51: This is a hot-fix version for 1.5 which is added a new restful web service for concrete data and fixed some major bugs. The change list is as follo...Rawr: Rawr 2.3.11: - Load from Armory code cleaned up. - Tiny Abomination in a Jar's proc how now been more accurately modeled. - You should now be able to reload...Resharper Settings Manager: RSM v1.2: Changes Added Default Settings File option. The selected settings file will be loaded automatically for solutions with no settings sharing. Added...Reusable Library Demo: Reusable Library Demo v1.0.0: A demonstration of reusable abstractions for enterprise application developerRounded Corners / DIV Container: MJC RoundedDiv 3.2: This is the first public release on Codeplex.com. Versions previous to 3.2 were created before this control was made available on Codeplex.com.SharePoint 2010 Conference Samples: Samples: Download the samples from the conferencesSharePoint Outlook Connector: Version 1.2.2.8: Saving email message as list item and attachments as attachment of the list item functionality has been addedSharePoint URL Ping Tool: Url Ping Tool Solution: A solution that contain one fram fature that will add a link under Site Administration section in the Site Settings page.SMTP Test: Fist SMTP Tester: First ReleaseSolution Tools - tools for Visual Studio solutions and projects: SolutionTools binary: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead!Solution Tools - tools for Visual Studio solutions and projects: SolutionTools source - don't use this tool: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead! Anyway, here's the source code...Spark View Engine: Spark v1.1 RC1: Overview This build is a preview of v1.1. Among other changes it provides support for ASP.NET MVC 2 RC2. Spark v1.1 release will be created soon ...Sprite Sheet Packer: 2.0 Release: I'm calling this a full new release because I can. Refactored all of the build logic to sspack.exe. This allows you to run this from the command l...SPSF SharePoint Software Factory: SPSF SharePoint Software Factory 2.4.3: New features: WSPBuilder support, Simple Application now with optional multilanguage support, Extending deployment skript for large deployments Fix...TortoiseHg: Beta for TortoiseHg 1.0 (0.9.31201): Beta for TortoiseHg 1.0 (0.9.31201) Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before installing Use the x86...UI Compiler .NET - JavaScript compiler/minifier built on Google Closure Compiler: UI Compiler .NET 1.5 Beta: UI Compiler .NET does not include Java. To be able to run Google Closure Compiler locally you must make sure that Java 6 is installed. If Java 6 (o...VCC: Latest build, v2.1.30227.0: Automatic drop of latest buildVisual Studio DSite: File Encryption and Decryption (Visual Basic 2008): This program will create an encrypted copy of the file specified. Also decrypt the file specified. This program contains the source code but if yo...Visual Studio DSite: Visual C++ 2008 CLR Console Application Random Int: This source code includes an example of generating a random integer between the numbers 1-100.Weather Forecast Control: MJC MyWeather 2.2: This is the first public release on Codeplex.com. Versions previous to 2.2 were created before this control was made available on Codeplex.com.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionBlogEngine.NETMost Active ProjectsDinnerNow.netRawrBlogEngine.NETMapWindow GISSLARToolkit - Silverlight Augmented Reality ToolkitCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >