Search Results

Search found 4813 results on 193 pages for 'ram shankar yadav'.

Page 77/193 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Impact of the L3 cache on performance - worth a dual-processor system?

    - by Dan Nissenbaum
    I will be purchasing a new high-end system, and I would like to have a better sense of whether a dual-processor Xeon system (I am looking at the new, high-end Xeon E5-2687W) might, realistically, provide a noticeable performance improvement due to the doubling of the L3 cache (20 MB per CPU). (This is in addition to the occasional added advantage due to the doubling of cores and RAM.) My usage scenario is, roughly, that I have many background applications running at any time - 3 or 4 data compression/backup applications, a low-impact web server, one or two virtual machines at any given time (usually fairly idle), and perhaps 20 utility programs that utilize a noticeable (but small) portion of the CPU cores. In total, when I am not actively using the computer, about 25% of the total CPU power is utilized in my current i7-970 6-core (12 thread) system. When I am doing routine work, the CPU utilization often exceeds 50%, and occasionally hits 75%-80%. The Xeon E5-2687W is not only a second-generation i7 (so should improve performance for that reason), but also has 8 cores (16 threads), rather than 6 cores. For this reason, I expect to run into the 75% CPU range even less frequently. Nonetheless, the ability to double the cores and the RAM is a consideration. However, in the end, I believe this decision comes down to whether the doubling of the L3 cache will provide a noticeable improvement. There are many benchmarks, and a lot of discussion, regarding CPU power. However, I find very little discussion of L3 cache utilization, and how increases in the L3 cache (such as doubling it with dual processors) affect performance. For example: If there are only two processes running, but each benefits from a large L3 cache (such as might be the case for background processes that frequently scan the file system), perhaps the overall system performance might noticeably improve with dual CPU's - even if only a single core is active on each CPU - due to each process having double the effective L3 cache. I am hoping that someone has a sense of the benefits of increasing (or doubling) the L3 cache size. Note: the CPU I am considering (the Xeon E5-2687W) has 20 MB L3 cache, so a system with dual CPU's would have 40 MB L3 cache.

    Read the article

  • Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

    - by Synetech inc.
    Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

    Read the article

  • Does Firefox still have memory leaks?

    - by tom
    I've had my Firefox 3.6.3 browser consume up to 1.5GB of RAM after a few days of usage without closing it. This is even true when, after a few days of opening/closing tabs, there's only 1 tab open. Does Firefox still have memory leaks?

    Read the article

  • Event ID 17890 (A significant part... paged out.) with SQL Server 2008

    - by Godeke
    I have a machine that has SQL Server 2008 Standard installed. Periodically (about once an hour) I am getting Event ID 17890 several times in a row. An example: 6:28:54 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 10652, committed (KB): 628428, memory utilization: 1%%. 6:34:27 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 332 seconds. Working set (KB): 169780, committed (KB): 546124, memory utilization: 31%%." 6:38:55 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 600 seconds. Working set (KB): 245068, committed (KB): 546124, memory utilization: 44%%." This pattern repeated at 7:26 - 7:37, 8:26 - 8:36, 9:24 - 9:35 and so with the same increasing working set and memory utilization pattern. I don't have any (known) background tasks running at this time. Backups run at 2:00 This subsided from 11:00 at night until it resumed at 4:00 in the morning and has been continuing the intermittent 10 minute glitch periods. As this server has plenty of RAM (the commit charge has peaked at 2,871,564 of 4,194,012 physical) I disabled the paging files after reading several items I dug up searching Google and not finding any of them changing the situation. This pattern I am documented is after removing the paging files, so I'm not even sure where we are paging the SQL process could be going. I also changed the SQL process memory to have a minimum of 500MB and a maximum of 2GB of RAM (as this is a light duty database server serving only a small workgroup). Has anyone encountered this? Prior to disabling the page files this error would cause 5 minutes of disk thrashing that disabled access to the databases, files, IIS webs and so on. Since disabling the page files it just logs strange things, but I'm not seeing a performance drop at least. Any suggestions would be welcome.

    Read the article

  • How To Troubleshoot Excess Time From Connect to First Byte?

    - by Gaia
    I measured load times for a wordpress 2.9.2 install on apache 2.2.3 and I was intrigued by the long periods between connect and first byte for the css and image files. Load Average is 0.0, 0.0, 0.0 and there are 150MB free RAM on the VPS. Pingdom results are at http://imagebin.ca/img/6UaiOU.png How do I gain insight into the possible causes of this problem and how would I troubleshoot it? Thanks

    Read the article

  • Is it possible to have XP Mode in Windows 7 Home Premium?

    - by Paul
    I have Windows 7 Home Prem 32-bit with 2GB RAM. I have some older software that won't run so am wondering if i can run XP Mode? Is it only possible if you have Windows 7 Professional or Ultimate? If that is the case is there any other way to do something similar or will i need to install XP on another HD or partition?

    Read the article

  • CPU Test Similar to Memtest?

    - by Nick Whaley
    I need an easy way to do system stability tests. I have come to rely on Prime95 which does a fantastic job of proving stability (or instability) very quickly; but it requires an OS installed. I would like something like Prime95 that stresses both CPU and RAM (maybe PCI-Ex bus also?) but runs in a nice bootable binary like Memtest86+ does, so I can boot it from a thumbdrive. Does such a thing exist?

    Read the article

  • what is slowing my application?

    - by sam
    Hi, I am generating a report as a web page 3MB, I am a newbie, I am not sure why it is slow: the size is big the upload internet is slow the server is slow the browser is taking long time to process the cleint code (Jquery, javascript) please ask me questions, so I can explain more,??? I have a quad CPU, 4G Ram with two web application running, the (Down/up) is 8Mb/3Mb as ISP says, speedtest.net shows only: Ping 41ms, Download 4Mb, up: 0.16Mb thanks

    Read the article

  • Linux server became extremely slow

    - by Ariel Aharonson
    I have a file sharing website, and my files hosted in a server with those system specifications: 32GB RAM 12x3TB 2x Intel Quad Core E5620 I have files in this server up to 4gb for each file. 446gb is full (/36TB) [root@hosted-by ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 50G 2.7G 44G 6% / tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 97M 57M 36M 62% /boot /dev/mapper/VolGroup01-LogVol00 33T 494G 33T 2% /home And take a look at this: Why is the wa% so high? (I think that what makes the server to be so slow)

    Read the article

  • Windows Media Center Buffering and Asus MyCinema U3100mini

    - by dsimcha
    I'm running an Asus MyCinema U3100mini ATSC on Windows 7 64-bit. When I play live TV in Windows Media Center, it's very choppy and uses 500+ MB of RAM, I'm guessing due to the hard drive buffering functionality. Is there any way to disable the live TV pause buffer completely? If not, can anyone recommend alternative software that: Works with the MyCinema. Is lightweight and not horribly bloated with features I'll never use like Windows Media Center is.

    Read the article

  • Is this video card good for 3 monitors? [on hold]

    - by Brian Briu
    Video card: http://www.amazon.de/Zotac-NVIDIA-GeForce-Grafikkarte-Speicher/dp/B00D4KCSHG/ref=sr_1_11?ie=UTF8&qid=1408575042&sr=8-11&keywords=grafikkarte 3 Monitors like this: http://www.mediamarkt.de/mcs/product/ASUS-MX-239-H,48353,462790,951629.html?langId=-3 If yes how can I connect them? If no, i'll buy one more video card like that. Also tell me what motherboard should I buy for these things + 32 ram and i7 (remember that in the future i'll buy one morre video card (to have 2). Power supply also?

    Read the article

  • What Linux distro should I install on an old PowerPC Mac?

    - by rockit
    I'm trying to set up my brother–who has a PPC Mac with 1 GHz processor and 256 MB RAM–with a Linux distro that would allow him to surf the web on the device. If anyone knows of this Mac, they also know that support has faded for the latest browsers, rendering the device essentially useless when it comes to the web. Ideally I would have installed Jolicloud, but alas, it is only Intel Mac compatible... Please let me know if you have any suggestions for me!

    Read the article

  • Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

    - by Tiby
    I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

    Read the article

  • Image thumbnails flashes and then disappears in Windows Vista

    - by Hemant
    I have Windows Vista installed on my machine and I am facing this really annoying problem. Whenever I open a folder having images, image thumbnails appear for an instant and they are replaced by standard file icon. Argh... Points to note: Setting "Always show icon, never thumbnail" is unchecked Running Windows Aero theme (with transparency support) Have 4GB of RAM on my machine so memory is not a problem Please can you suggest a solution?

    Read the article

  • Drupal on an NFS share has terrible performance

    - by Marcus
    We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

    Read the article

  • MS Publisher 2003 - hangs when saving to desktop

    - by Chris
    We have a win 7 home prem pc, amd cpu, 8G ram, plenty of free disk space. Whenever user is working in publisher 20003, and tries to save a publisher 2003 document to the desktop, the save as dialog hangs and takes 2-3 minutes to display the desktop save location. I've tested excel 2003, it has no problems immediately displaying the desktop save as location and saving the file.

    Read the article

  • VMWare Pre-Allocated vs. Growable, which is faster?

    - by tekiegreg
    In an effort to increase speed in my Vmware setup, I was thinking about converting a Windows XP Guest 32 bit I have from growable to pre-allocated, I'm currently running VMWare Workstation 7 with Windows 7 64 bit as the host. Specs: Dual Core CPU, one allocated to guest 4GB of RAM, 2GB to guest HD max capacity is 500GB, 150GB allocated to guest (I have 300GB left and don't mind parting with the space, currently HD is 80GB and converting would obviously add another 70GB of space), HD that guest is running on is separate from Host OS Either that or any other suggestions you have might be appreciated, thanks!

    Read the article

  • Freeze on boot: firmware bug

    - by Bernavi Spain
    When I boot Mint in recovery profile it says something about a bug, then it freezes on the line: Firmware bug DOD is defined but not DOS I want to access it because I need to restore it like it was the first time I used it. I am suspecting it may be something about the drivers. Is there any way to restore my system? Here are my pc specifications: Dell XPS 15z Intel core i7 6 gb Ram Im using linux mint, maya, cinnamon

    Read the article

  • Why is the Windows UI responds slowly after being idle for a long time?

    - by John Isaiah Carmona
    I open these applications in my desktop computer: Visual Studio 2010 Professional IBM Lotus Notes Google Chrome And when it is idle for an hour and I restore the windows, the user interface responds very slowly. My computer auto-lock itself after being idle for 5 minutes. I also minimize the applications using a docklet (RocketDock). Why is it slowing down and how can I prevent it from slowing? My OS is Windows XP Professional SP3, Pentum(R) Dual Core @ 2.80 GHz, 1.99 GB of RAM.

    Read the article

  • Is U.P.S necessary to have for PC?

    - by Jitendra vyas
    otherwise can my PC component ( Monitor, Motherboard, RAM, HDD, CPU, SMPS) get damage dues to suddenly power gone and come and due to power fluctuation. or it's only needed to shut down windows Properly. Can i face both Hardware and Software problems without UPS?

    Read the article

  • Screen Flicker in Vista

    - by mario64
    I noticed everytime my dell inspiron 1420 wakes up from sleep the screen will flicker a lot. some times violently. I'm not sure what the problem is. I have disabled tmm but it didn't fix the flickers. Does anyone have a solution? Here's my spec: Dell Inspiron 1420 4GB RAM Intel Core 2 Duo T5750 Nvidia Geforce 8400MS Windows Vista 32bit

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >