Search Results

Search found 21301 results on 853 pages for 'duplicate values'.

Page 776/853 | < Previous Page | 772 773 774 775 776 777 778 779 780 781 782 783  | Next Page >

• Working with Analytic Workflow Manager (AWM) - Part 8 Cube Metadata Analysis

  - by Mohan Ramanuja

  CUBE SIZEselect dbal.owner||'.'||substr(dbal.table_name,4) awname, sum(dbas.bytes)/1024/1024 as mb, dbas.tablespace_name from dba_lobs dbal, dba_segments dbas where dbal.column_name = 'AWLOB' and dbal.segment_name = dbas.segment_name group by dbal.owner, dbal.table_name, dbas.tablespace_name order by dbal.owner, dbal.table_name SESSION RESOURCES select vses.username||':'||vsst.sid username, vstt.name, max(vsst.value) valuefrom v$sesstat vsst, v$statname vstt, v$session vseswhere vstt.statistic# = vsst.statistic# and vsst.sid = vses.sid andVSES.USERNAME LIKE ('ATTRIBDW_OWN') ANDvstt.name in ('session pga memory', 'session pga memory max', 'session uga memory','session uga memory max', 'session cursor cache count', 'session cursor cache hits', 'session stored procedure space', 'opened cursors current', 'opened cursors cumulative') andvses.username is not null group by vsst.sid, vses.username, vstt.name order by vsst.sid, vses.username, vstt.name OLAP PGA USE select 'OLAP Pages Occupying: '|| round((((select sum(nvl(pool_size,1)) from v$aw_calc)) / (select value from v$pgastat where name = 'total PGA inuse')),2)*100||'%' info from dual union select 'Total PGA Inuse Size: '||value/1024||' KB' info from v$pgastat where name = 'total PGA inuse' union select 'Total OLAP Page Size: '|| round(sum(nvl(pool_size,1))/1024,0)||' KB' info from v$aw_calc order by info desc OLAP PGA USAGE PER USER select vs.username, vs.sid, round(pga_used_mem/1024/1024,2)||' MB' pga_used, round(pga_max_mem/1024/1024,2)||' MB' pga_max, round(pool_size/1024/1024,2)||' MB' olap_pp, round(100*(pool_hits-pool_misses)/pool_hits,2) || '%' olap_ratio from v$process vp, v$session vs, v$aw_calc va where session_id=vs.sid and addr = paddr CUBE LOADING SCRIPT REM The 'set define off' statement is needed only if running this script through SQLPlus.REM If you are using another tool to run this script, the line below may be commented out.set define offBEGIN  DBMS_CUBE.BUILD(    'VALIDATE  ATTRIBDW_OWN.CURRENCY USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNT USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.DATEDIM USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.CUSIP USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNTRETURN',    'CCCCC', -- refresh methodfalse, -- refresh after errors    0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/BEGIN  DBMS_CUBE.BUILD(    '  ATTRIBDW_OWN.CURRENCY USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNT USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.DATEDIM USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.CUSIP USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNTRETURN',    'CCCCC', -- refresh methodfalse, -- refresh after errors    0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/ VISUALIZATION OBJECT - AW$ATTRIBDW_OWN  CREATE TABLE "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN"        (            "PS#"    NUMBER(10,0),            "GEN#"   NUMBER(10,0),            "EXTNUM" NUMBER(8,0),            "AWLOB" BLOB,            "OBJNAME"  VARCHAR2(256 BYTE),            "PARTNAME" VARCHAR2(256 BYTE)        )        PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE        (            BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "AWLOB"        )        STORE AS SECUREFILE        (            TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        )        PARTITION BY RANGE        (            "GEN#"        )        SUBPARTITION BY HASH        (            "PS#",            "EXTNUM"        )        SUBPARTITIONS 8        (            PARTITION "PTN1" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE READS LOGGING NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP661" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP662" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP663" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP664" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP665" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION            "SYS_SUBP666" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP667" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP668" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) ,            PARTITION "PTNN" VALUES LESS THAN (MAXVALUE) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP669" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP670" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP671" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP672" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP673" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION            "SYS_SUBP674" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP675" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP676" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" )        ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."ATTRIBDW_OWN_I$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN"    (        "PS#", "GEN#", "EXTNUM"    )    PCTFREE 10 INITRANS 4 MAXTRANS 255 COMPUTE STATISTICS STORAGE    (        INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT    )    TABLESPACE "ATTRIBDW_DATA" ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000406980C00004$$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN"    (        PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOCAL (PARTITION "SYS_IL_P711" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP695" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP696" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP697" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP698" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP699" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP700" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP701" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP702" TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "SYS_IL_P712" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP703" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP704" TABLESPACE        "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP705" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP706" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP707" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP708" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP709" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP710" TABLESPACE "ATTRIBDW_DATA" ) ) PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE BUILD LOG  CREATE TABLE "ATTRIBDW_OWN"."CUBE_BUILD_LOG"        (            "BUILD_ID"          NUMBER,            "SLAVE_NUMBER"      NUMBER,            "STATUS"            VARCHAR2(10 BYTE),            "COMMAND"           VARCHAR2(25 BYTE),            "BUILD_OBJECT"      VARCHAR2(30 BYTE),            "BUILD_OBJECT_TYPE" VARCHAR2(10 BYTE),            "OUTPUT" CLOB,            "AW"            VARCHAR2(30 BYTE),            "OWNER"         VARCHAR2(30 BYTE),            "PARTITION"     VARCHAR2(50 BYTE),            "SCHEDULER_JOB" VARCHAR2(100 BYTE),            "TIME" TIMESTAMP (6)WITH TIME ZONE,        "BUILD_SCRIPT" CLOB,        "BUILD_TYPE"            VARCHAR2(22 BYTE),        "COMMAND_DEPTH"         NUMBER(2,0),        "BUILD_SUB_OBJECT"      VARCHAR2(30 BYTE),        "REFRESH_METHOD"        VARCHAR2(1 BYTE),        "SEQ_NUMBER"            NUMBER,        "COMMAND_NUMBER"        NUMBER,        "IN_BRANCH"             NUMBER(1,0),        "COMMAND_STATUS_NUMBER" NUMBER,        "BUILD_NAME"            VARCHAR2(100 BYTE)        )        SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE        (            INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "OUTPUT"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        )        LOB        (            "BUILD_SCRIPT"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00013$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00007$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE DIMENSION COMPILE  CREATE TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"        (            "ID"               NUMBER,            "SEQ_NUMBER"       NUMBER,            "ERROR#"           NUMBER(8,0) NOT NULL ENABLE,            "ERROR_MESSAGE"    VARCHAR2(2000 BYTE),            "DIMENSION"        VARCHAR2(100 BYTE),            "DIMENSION_MEMBER" VARCHAR2(100 BYTE),            "MEMBER_ANCESTOR"  VARCHAR2(100 BYTE),            "HIERARCHY1"       VARCHAR2(100 BYTE),            "HIERARCHY2"       VARCHAR2(100 BYTE),            "ERROR_CONTEXT" CLOB        )        SEGMENT CREATION DEFERRED PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING TABLESPACE "ATTRIBDW_DATA" LOB        (            "ERROR_CONTEXT"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING        ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ID"IS    'Current operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."SEQ_NUMBER"IS    'Cube build log sequence number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR#"IS    'Error number being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_MESSAGE"IS    'Error text being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION"IS    'Name of dimension being compiled';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION_MEMBER"IS    'Problem dimension member';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."MEMBER_ANCESTOR"IS    'Problem dimension member''s parent';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY1"IS    'First hierarchy involved in error';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY2"IS    'Second hierarchy involved in error';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_CONTEXT"IS    'Extra information for error';    COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"IS    'Cube dimension compile log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407307C00010$$" ON "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE( INITIAL 1048576 NEXT 1048576 MAXEXTENTS 2147483645) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE OPERATING LOG  CREATE TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"        (            "INST_ID"    NUMBER NOT NULL ENABLE,            "SID"        NUMBER NOT NULL ENABLE,            "SERIAL#"    NUMBER NOT NULL ENABLE,            "USER#"      NUMBER NOT NULL ENABLE,            "SQL_ID"     VARCHAR2(13 BYTE),            "JOB"        NUMBER,            "ID"         NUMBER,            "PARENT_ID"  NUMBER,            "SEQ_NUMBER" NUMBER,            "TIME" TIMESTAMP (6)WITH TIME ZONE NOT NULL ENABLE,        "LOG_LEVEL"    NUMBER(4,0) NOT NULL ENABLE,        "DEPTH"        NUMBER(4,0),        "OPERATION"    VARCHAR2(15 BYTE) NOT NULL ENABLE,        "SUBOPERATION" VARCHAR2(20 BYTE),        "STATUS"       VARCHAR2(10 BYTE) NOT NULL ENABLE,        "NAME"         VARCHAR2(20 BYTE) NOT NULL ENABLE,        "VALUE"        VARCHAR2(4000 BYTE),        "DETAILS" CLOB        )        SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE        (            INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "DETAILS"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."INST_ID"IS    'Instance ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SID"IS    'Session ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SERIAL#"IS    'Session serial#';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."USER#"IS    'User ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SQL_ID"IS    'Executing SQL statement ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."JOB"IS    'Identifier of job';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."ID"IS    'Current operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."PARENT_ID"IS    'Parent operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SEQ_NUMBER"IS    'Cube build log sequence number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."TIME"IS    'Time of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."LOG_LEVEL"IS    'Verbosity level of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DEPTH"IS    'Nesting depth of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."OPERATION"IS    'Current operation';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SUBOPERATION"IS    'Current suboperation';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."STATUS"IS    'Status of current operation';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."NAME"IS    'Name of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."VALUE"IS    'Value of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DETAILS"IS    'Extra information for record';    COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"IS    'Cube operations log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407301C00018$$" ON "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE REJECTED RECORDS CREATE TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"        (            "ID"            NUMBER,            "SEQ_NUMBER"    NUMBER,            "ERROR#"        NUMBER(8,0) NOT NULL ENABLE,            "ERROR_MESSAGE" VARCHAR2(2000 BYTE),            "RECORD#"       NUMBER(38,0),            "SOURCE_ROW" ROWID,            "REJECTED_RECORD" CLOB        )        SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE        (            INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "REJECTED_RECORD"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ID"IS    'Current operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SEQ_NUMBER"IS    'Cube build log sequence number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR#"IS    'Error number being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR_MESSAGE"IS    'Error text being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."RECORD#"IS    'Rejected record number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SOURCE_ROW"IS    'Rejected record''s ROWID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."REJECTED_RECORD"IS    'Rejected record copy';    COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"IS    'Cube rejected records log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407304C00007$$" ON "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;

  Read the article

• Caching factory design

  - by max

  I have a factory class XFactory that creates objects of class X. Instances of X are very large, so the main purpose of the factory is to cache them, as transparently to the client code as possible. Objects of class X are immutable, so the following code seems reasonable: # module xfactory.py import x class XFactory: _registry = {} def get_x(self, arg1, arg2, use_cache = True): if use_cache: hash_id = hash((arg1, arg2)) if hash_id in _registry: return _registry[hash_id] obj = x.X(arg1, arg2) _registry[hash_id] = obj return obj # module x.py class X: # ... Is it a good pattern? (I know it's not the actual Factory Pattern.) Is there anything I should change? Now, I find that sometimes I want to cache X objects to disk. I'll use pickle for that purpose, and store as values in the _registry the filenames of the pickled objects instead of references to the objects. Of course, _registry itself would have to be stored persistently (perhaps in a pickle file of its own, in a text file, in a database, or simply by giving pickle files the filenames that contain hash_id). Except now the validity of the cached object depends not only on the parameters passed to get_x(), but also on the version of the code that created these objects. Strictly speaking, even a memory-cached object could become invalid if someone modifies x.py or any of its dependencies, and reloads it while the program is running. So far I ignored this danger since it seems unlikely for my application. But I certainly cannot ignore it when my objects are cached to persistent storage. What can I do? I suppose I could make the hash_id more robust by calculating hash of a tuple that contains arguments arg1 and arg2, as well as the filename and last modified date for x.py and every module and data file that it (recursively) depends on. To help delete cache files that won't ever be useful again, I'd add to the _registry the unhashed representation of the modified dates for each record. But even this solution isn't 100% safe since theoretically someone might load a module dynamically, and I wouldn't know about it from statically analyzing the source code. If I go all out and assume every file in the project is a dependency, the mechanism will still break if some module grabs data from an external website, etc.). In addition, the frequency of changes in x.py and its dependencies is quite high, leading to heavy cache invalidation. Thus, I figured I might as well give up some safety, and only invalidate the cache only when there is an obvious mismatch. This means that class X would have a class-level cache validation identifier that should be changed whenever the developer believes a change happened that should invalidate the cache. (With multiple developers, a separate invalidation identifier is required for each.) This identifier is hashed along with arg1 and arg2 and becomes part of the hash keys stored in _registry. Since developers may forget to update the validation identifier or not realize that they invalidated existing cache, it would seem better to add another validation mechanism: class X can have a method that returns all the known "traits" of X. For instance, if X is a table, I might add the names of all the columns. The hash calculation will include the traits as well. I can write this code, but I am afraid that I'm missing something important; and I'm also wondering if perhaps there's a framework or package that can do all of this stuff already. Ideally, I'd like to combine in-memory and disk-based caching.

  Read the article

• CodePlex Daily Summary for Sunday, September 09, 2012

  CodePlex Daily Summary for Sunday, September 09, 2012Popular ReleasesMishra Reader: Mishra Reader Beta 4: Additional bug fixes and logging in this release to try to find the reason some users aren't able to see the main window pop up. Also, a few UI tweaks to tighten up the feed item list. This release requires the final version of .NET 4.5. If the ClickOnce installer doesn't work for you, please try the additional setup exe.Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing decimal precision when writing decimal JValuesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Umbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)Lightweight Fluent Workflow: objectflow 1.4.0.1: Changes in this release;Exception handling policies Install on NuGet console; Install-Package objectflow.core -pre Supported work-flow patterns Exception policies Sequence Parallel split Simple merge Exclusive choice Retry Arbitrary cycles Framework Features Handle exceptions with workflow.Configure().On<Exception>() Repeat operations and functions an arbitrary number of times Retry failed lamda functions Generic interface for concise workflow registration Operations t...Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...LibXmlSocket: Binary: .net4.5,.netCore???????Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comThe Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.New ProjectsAjax based Multi Forms ASP.NET Framework (Amfan): Ajax based Multi Forms ASP.NET Framework (Amfan) reduces the limitations of the Asp.Net by creating multiple sub-forms of the page as separate aspx pages.APO-CS: A straight port of Apophysis to C#.BaceCP / ???? ????? ?? ???????? ????: BaceCP e ??????????? ???????? ?? ????????, ??????????? ? ????????? ?? ???? ????? ?? ???????? ????.CafeAdm Messenger: CafeAdm Messenger Allows a server connection for CafeAdm Schedule and MessengerDECnet 2.0 Router: A user mode DECnet 2.0 router that will interoperate with the HECnet bridge.DriveManager: This is a common utility to provide an interface for all cloud based drive providers like google drive, dropbox, MS Sky Drive. Email Tester: This utility will help you check your SMTP settings for SharePoint. It is best for Pre-PROD and PROD environment where you can't modify code.EvoGame: The evo game that im working onforebittims: Project Owner : ForeBitt Inc. Sri Lanka Project Manager : Chackrapani Wickramarathne Technologies : VS 2010, C#, Linq to Sql, Sql server 2008 R2, Dev ExpressMCServe: MCServe is the minecraft-server which takes advantage of the performance of the .NET FrameworkMental: Ðang trong quá trình phát tri?nSalaryManagementSys: SalaryManagementSysVKplay: This application is audio player, launches on windows phone platform and uses music from vk.com social network.

  Read the article

• methods DSA_do_verify and SHA1 (OpenSSL library for Windows)

  - by Rei

  i am working on a program to authenticate an ENC signature file by using OpenSSL for windows, and specifically methods DSA_do_verify(...) and SHA1(...) hash algorithm, but is having problems as the result from DSA_do_verify is always 0 (invalid). I am using the signature file of test set 4B from the IHO S-63 Data Protection Scheme, and also the SA public key (downloadable from IHO) for verification. Below is my program, can anyone help to see where i have gone wrong as i have tried many ways but failed to get the verification to be valid, thanks.. The signature file from test set 4B // Signature part R: 3F14 52CD AEC5 05B6 241A 02C7 614A D149 E7D6 C408. // Signature part S: 44BB A3DB 8C46 8D11 B6DB 23BE 1A79 55E6 B083 7429. // Signature part R: 93F5 EF86 1FF6 BA6F 1C2B B9BB 7F36 0C80 2F9B 2414. // Signature part S: 4877 8130 12B4 50D8 3688 B52C 7A84 8E26 D442 8B6E. // BIG p C16C BAD3 4D47 5EC5 3966 95D6 94BC 8BC4 7E59 8E23 B5A9 D7C5 CEC8 2D65 B682 7D44 E953 7848 4730 C0BF F1F4 CB56 F47C 6E51 054B E892 00F3 0D43 DC4F EF96 24D4 665B. // BIG q B7B8 10B5 8C09 34F6 4287 8F36 0B96 D7CC 26B5 3E4D. // BIG g 4C53 C726 BDBF BBA6 549D 7E73 1939 C6C9 3A86 9A27 C5DB 17BA 3CAC 589D 7B3E 003F A735 F290 CFD0 7A3E F10F 3515 5F1A 2EF7 0335 AF7B 6A52 11A1 1035 18FB A44E 9718. // BIG y 15F8 A502 11C2 34BB DF19 B3CD 25D1 4413 F03D CF38 6FFC 7357 BCEE 59E4 EBFD B641 6726 5E5F 0682 47D4 B50B 3B86 7A85 FB4D 6E01 8329 A993 C36C FD9A BFB6 ED6D 29E0. dataServer_pkeyfile.txt (extracted from above) // BIG p C16C BAD3 4D47 5EC5 3966 95D6 94BC 8BC4 7E59 8E23 B5A9 D7C5 CEC8 2D65 B682 7D44 E953 7848 4730 C0BF F1F4 CB56 F47C 6E51 054B E892 00F3 0D43 DC4F EF96 24D4 665B. // BIG q B7B8 10B5 8C09 34F6 4287 8F36 0B96 D7CC 26B5 3E4D. // BIG g 4C53 C726 BDBF BBA6 549D 7E73 1939 C6C9 3A86 9A27 C5DB 17BA 3CAC 589D 7B3E 003F A735 F290 CFD0 7A3E F10F 3515 5F1A 2EF7 0335 AF7B 6A52 11A1 1035 18FB A44E 9718. // BIG y 15F8 A502 11C2 34BB DF19 B3CD 25D1 4413 F03D CF38 6FFC 7357 BCEE 59E4 EBFD B641 6726 5E5F 0682 47D4 B50B 3B86 7A85 FB4D 6E01 8329 A993 C36C FD9A BFB6 ED6D 29E0. Program abstract: QbyteArray pk_data; QFile pk_file("./dataServer_pkeyfile.txt"); if (pk_file.open(QIODevice::Text | QIODevice::ReadOnly)) { pk_data.append(pk_file.readAll()); } pk_file.close(); unsigned char ptr_sha_hashed[20]; unsigned char *ptr_pk_data = (unsigned char *)pk_data.data(); // openssl SHA1 hashing algorithm SHA1(ptr_pk_data, pk_data.length(), ptr_sha_hashed); DSA_SIG *dsasig = DSA_SIG_new(); char ptr_r[] = "93F5EF861FF6BA6F1C2BB9BB7F360C802F9B2414"; //from tset 4B char ptr_s[] = "4877813012B450D83688B52C7A848E26D4428B6E"; //from tset 4B if (BN_hex2bn(&dsasig->r, ptr_r) == 0) return 0; if (BN_hex2bn(&dsasig->s, ptr_s) == 0) return 0; DSA *dsakeys = DSA_new(); //the following values are from the SA public key char ptr_p[] = "FCA682CE8E12CABA26EFCCF7110E526DB078B05EDECBCD1EB4A208F3AE1617AE01F35B91A47E6DF63413C5E12ED0899BCD132ACD50D99151BDC43EE737592E17"; char ptr_q[] = "962EDDCC369CBA8EBB260EE6B6A126D9346E38C5"; char ptr_g[] = "678471B27A9CF44EE91A49C5147DB1A9AAF244F05A434D6486931D2D14271B9E35030B71FD73DA179069B32E2935630E1C2062354D0DA20A6C416E50BE794CA4"; char ptr_y[] = "963F14E32BA5372928F24F15B0730C49D31B28E5C7641002564DB95995B15CF8800ED54E354867B82BB9597B158269E079F0C4F4926B17761CC89EB77C9B7EF8"; if (BN_hex2bn(&dsakeys->p, ptr_p) == 0) return 0; if (BN_hex2bn(&dsakeys->q, ptr_q) == 0) return 0; if (BN_hex2bn(&dsakeys->g, ptr_g) == 0) return 0; if (BN_hex2bn(&dsakeys->pub_key, ptr_y) == 0) return 0; int result; //valid = 1, invalid = 0, error = -1 result = DSA_do_verify(ptr_sha_hashed, 20, dsasig, dsakeys); //result is 0 (invalid)

  Read the article

• Strategies for invoking subclass methods on generic objects

  - by Brad Patton

  I've run into this issue in a number of places and have solved it a bunch of different ways but looking for other solutions or opinions on how to address. The scenario is when you have a collection of objects all based off of the same superclass but you want to perform certain actions based only on instances of some of the subclasses. One contrived example of this might be an HTML document made up of elements. You could have a superclass named HTMLELement and subclasses of Headings, Paragraphs, Images, Comments, etc. To invoke a common action across all of the objects you declare a virtual method in the superclass and specific implementations in all of the subclasses. So to render the document you could loop all of the different objects in the document and call a common Render() method on each instance. It's the case where again using the same generic objects in the collection I want to perform different actions for instances of specific subclass (or set of subclasses). For example (an remember this is just an example) when iterating over the collection, elements with external links need to be downloaded (e.g. JS, CSS, images) and some might require additional parsing (JS, CSS). What's the best way to handle those special cases. Some of the strategies I've used or seen used include: Virtual methods in the base class. So in the base class you have a virtual LoadExternalContent() method that does nothing and then override it in the specific subclasses that need to implement it. The benefit being that in the calling code there is no object testing you send the same message to each object and let most of them ignore it. Two downsides that I can think of. First it can make the base class very cluttered with methods that have nothing to do with most of the hierarchy. Second it assumes all of the work can be done in the called method and doesn't handle the case where there might be additional context specific actions in the calling code (i.e. you want to do something in the UI and not the model). Have methods on the class to uniquely identify the objects. This could include methods like ClassName() which return a string with the class name or other return values like enums or booleans (IsImage()). The benefit is that the calling code can use if or switch statements to filter objects to perform class specific actions. The downside is that for every new class you need to implement these methods and can look cluttered. Also performance could be less than some of the other options. Use language features to identify objects. This includes reflection and language operators to identify the objects. For example in C# there is the is operator that returns true if the instance matches the specified class. The benefit is no additional code to implement in your object hierarchy. The only downside seems to be the lack of using something like a switch statement and the fact that your calling code is a little more cluttered. Are there other strategies I am missing? Thoughts on best approaches?

  Read the article

• Learn Many Languages

  - by Jeff Foster

  My previous blog, Deliberate Practice, discussed the need for developers to “sharpen their pencil” continually, by setting aside time to learn how to tackle problems in different ways. However, the Sapir-Whorf hypothesis, a contested and somewhat-controversial concept from language theory, seems to hold reasonably true when applied to programming languages. It states that: “The structure of a language affects the ways in which its speakers conceptualize their world.” If you’re constrained by a single programming language, the one that dominates your day job, then you only have the tools of that language at your disposal to think about and solve a problem. For example, if you’ve only ever worked with Java, you would never think of passing a function to a method. A good developer needs to learn many languages. You may never deploy them in production, you may never ship code with them, but by learning a new language, you’ll have new ideas that will transfer to your current “day-job” language. With the abundant choices in programming languages, how does one choose which to learn? Alan Perlis sums it up best. “A language that doesn‘t affect the way you think about programming is not worth knowing“ With that in mind, here’s a selection of languages that I think are worth learning and that have certainly changed the way I think about tackling programming problems. Clojure Clojure is a Lisp-based language running on the Java Virtual Machine. The unique property of Lisp is homoiconicity, which means that a Lisp program is a Lisp data structure, and vice-versa. Since we can treat Lisp programs as Lisp data structures, we can write our code generation in the same style as our code. This gives Lisp a uniquely powerful macro system, and makes it ideal for implementing domain specific languages. Clojure also makes software transactional memory a first-class citizen, giving us a new approach to concurrency and dealing with the problems of shared state. Haskell Haskell is a strongly typed, functional programming language. Haskell’s type system is far richer than C# or Java, and allows us to push more of our application logic to compile-time safety. If it compiles, it usually works! Haskell is also a lazy language – we can work with infinite data structures. For example, in a board game we can generate the complete game tree, even if there are billions of possibilities, because the values are computed only as they are needed. Erlang Erlang is a functional language with a strong emphasis on reliability. Erlang’s approach to concurrency uses message passing instead of shared variables, with strong support from both the language itself and the virtual machine. Processes are extremely lightweight, and garbage collection doesn’t require all processes to be paused at the same time, making it feasible for a single program to use millions of processes at once, all without the mental overhead of managing shared state. The Benefits of Multilingualism By studying new languages, even if you won’t ever get the chance to use them in production, you will find yourself open to new ideas and ways of coding in your main language. For example, studying Haskell has taught me that you can do so much more with types and has changed my programming style in C#. A type represents some state a program should have, and a type should not be able to represent an invalid state. I often find myself refactoring methods like this… void SomeMethod(bool doThis, bool doThat) { if (!(doThis ^ doThat)) throw new ArgumentException(“At least one arg should be true”); if (doThis) DoThis(); if (doThat) DoThat(); } …into a type-based solution, like this: enum Action { DoThis, DoThat, Both }; void SomeMethod(Action action) { if (action == Action.DoThis || action == Action.Both) DoThis(); if (action == Action.DoThat || action == Action.Both) DoThat(); } At this point, I’ve removed the runtime exception in favor of a compile-time check. This is a trivial example, but is just one of many ideas that I’ve taken from one language and implemented in another.

  Read the article

• Arcball Problems with UDK

  - by opdude

  I'm trying to re-create an arcball example from a Nehe, where an object can be rotated in a more realistic way while floating in the air (in my game the object is attached to the player at a distance like for example the Physics Gun) however I'm having trouble getting this to work with UDK. I have created an LGArcBall which follows the example from Nehe and I've compared outputs from this with the example code. I think where my problem lies is what I do to the Quaternion that is returned from the LGArcBall. Currently I am taking the returned Quaternion converting it to a rotation matrix. Getting the product of the last rotation (set when the object is first clicked) and then returning that into a Rotator and setting that to the objects rotation. If you could point me in the right direction that would be great, my code can be found below. class LGArcBall extends Object; var Quat StartRotation; var Vector StartVector; var float AdjustWidth, AdjustHeight, Epsilon; function SetBounds(float NewWidth, float NewHeight) { AdjustWidth = 1.0f / ((NewWidth - 1.0f) * 0.5f); AdjustHeight = 1.0f / ((NewHeight - 1.0f) * 0.5f); } function StartDrag(Vector2D startPoint, Quat rotation) { StartVector = MapToSphere(startPoint); } function Quat Update(Vector2D currentPoint) { local Vector currentVector, perp; local Quat newRot; //Map the new point to the sphere currentVector = MapToSphere(currentPoint); //Compute the vector perpendicular to the start and current perp = startVector cross currentVector; //Make sure our length is larger than Epsilon if (VSize(perp) > Epsilon) { //Return the perpendicular vector as the transform newRot.X = perp.X; newRot.Y = perp.Y; newRot.Z = perp.Z; //In the quaternion values, w is cosine (theta / 2), where //theta is the rotation angle newRot.W = startVector dot currentVector; } else { //The two vectors coincide, so return an identity transform newRot.X = 0.0f; newRot.Y = 0.0f; newRot.Z = 0.0f; newRot.W = 0.0f; } return newRot; } function Vector MapToSphere(Vector2D point) { local float x, y, length, norm; local Vector result; //Transform the mouse coords to [-1..1] //and inverse the Y coord x = (point.X * AdjustWidth) - 1.0f; y = 1.0f - (point.Y * AdjustHeight); length = (x * x) + (y * y); //If the point is mapped outside of the sphere //( length > radius squared) if (length > 1.0f) { norm = 1.0f / Sqrt(length); //Return the "normalized" vector, a point on the sphere result.X = x * norm; result.Y = y * norm; result.Z = 0.0f; } else //It's inside of the sphere { //Return a vector to the point mapped inside the sphere //sqrt(radius squared - length) result.X = x; result.Y = y; result.Z = Sqrt(1.0f - length); } return result; } DefaultProperties { Epsilon = 0.000001f } I'm then attempting to rotate that object when the mouse is dragged, with the following update code in my PlayerController. //Get Mouse Position MousePosition.X = LGMouseInterfacePlayerInput(PlayerInput).MousePosition.X; MousePosition.Y = LGMouseInterfacePlayerInput(PlayerInput).MousePosition.Y; newQuat = ArcBall.Update(MousePosition); rotMatrix = MakeRotationMatrix(QuatToRotator(newQuat)); rotMatrix = rotMatrix * LastRot; LGMoveableActor(movingPawn.CurrentUseableObject).SetPhysics(EPhysics.PHYS_Rotating); LGMoveableActor(movingPawn.CurrentUseableObject).SetRotation(MatrixGetRotator(rotMatrix));

  Read the article

• Checking form input data on submit with pure PHP [migrated]

  - by Leron

  I have some experience with PHP but I have never even try to do this wit pure PHP, but now a friend of mine asked me to help him with this task so I sat down and write some code. What I'm asking is for opinion if this is the right way to do this when you want to use only PHP and is there anything I can change to make the code better. Besides that I think the code is working at least with the few test I made with it. Here it is: <?php session_start(); // define variables and initialize with empty values $name = $address = $email = ""; $nameErr = $addrErr = $emailErr = ""; $_SESSION["name"] = $_SESSION["address"] = $_SESSION["email"] = ""; $_SESSION["first_page"] = false; if ($_SERVER["REQUEST_METHOD"] == "POST") { if (empty($_POST["name"])) { $nameErr = "Missing"; } else { $_SESSION["name"] = $_POST["name"]; $name = $_POST["name"]; } if (empty($_POST["address"])) { $addrErr = "Missing"; } else { $_SESSION["address"] = $_POST["address"]; $address = $_POST["address"]; } if (empty($_POST["email"])) { $emailErr = "Missing"; } else { $_SESSION["email"] = $_POST["email"]; $email = $_POST["email"]; } } if ($_SESSION["name"] != "" && $_SESSION["address"] != "" && $_SESSION["email"] != "") { $_SESSION["first_page"] = true; header('Location: http://localhost/formProcessing2.php'); //echo $_SESSION["name"]. " " .$_SESSION["address"]. " " .$_SESSION["email"]; } ?> <DCTYPE! html> <head> <style> .error { color: #FF0000; } </style> </head> <body> <form method="POST" action="<?php echo htmlspecialchars($_SERVER["PHP_SELF"]);?>"> Name <input type="text" name="name" value="<?php echo htmlspecialchars($name);?>"> <span class="error"><?php echo $nameErr;?></span> <br /> Address <input type="text" name="address" value="<?php echo htmlspecialchars($address);?>"> <span class="error"><?php echo $addrErr;?></span> <br /> Email <input type="text" name="email" value="<?php echo htmlspecialchars($email);?>"> <span class="error"><?php echo $emailErr;?></span> <br /> <input type="submit" name="submit" value="Submit"> </form> </body> </html>

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• problem on my site [closed]

  - by ali

  Errors found while checking this document as XHTML How and from where repaired ,please help my hello, I have a problem on my site, was discovered by the program (A1 website analyzer) you can fix my site? Because I really do not know about the programming language, if it please email me and thank you please see this link it http://jigsaw.w3.org/css-validator/validator?uri=http://www.moneybillion.com/#errors Validation Output: 19 Errors Line 193, Column 261: there is no attribute "data-count" …ass="twitter-share-button" data-count="horizontal" data-via="elibeto1199"Twee…? You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead). This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the element to incorporate flash media in a Web page, see the FAQ item on valid flash. Line 193, Column 283: there is no attribute "data-via" …ton" data-count="horizontal" data-via="elibeto1199"Tweet This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information. How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the element to incorporate flash media in a Web page, see the FAQ item on valid flash. Line 193, Column 393: required attribute "type" not specified …ript" src="//platform.twitter.com/widgets.js"var facebook = {? The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element. Typical values for type are type="text/css" for and type="text/javascript" for . Line 194, Column 23: element "data:post.url" undefined url : "",? You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by: incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "" element), by using vendor proprietary extensions such as "" or "" (this is usually fixed by using CSS to achieve the desired effect instead). by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case). Line 197, Column 62: required attribute "type" not specified src="http://orkut-share.googlecode.com/svn/trunk/facebook.js"?

  Read the article

• In hindsight, is basing XAML on XML a mistake or a good approach?

  - by romkyns

  XAML is essentially a subset of XML. One of the main benefits of basing XAML on XML is said to be that it can be parsed with existing tools. And it can, to a large degree, although the (syntactically non-trivial) attribute values will stay in text form and require further parsing. There are two major alternatives to describing a GUI in an XML-derived language. One is to do what WinForms did, and describe it in real code. There are numerous problems with this, though it’s not completely advantage-free (a question to compare XAML to this approach). The other major alternative is to design a completely new syntax specifically tailored for the task at hand. This is generally known as a domain-specific language. So, in hindsight, and as a lesson for the future generations, was it a good idea to base XAML on XML, or would it have been better as a custom-designed domain-specific language? If we were designing an even better UI framework, should we pick XML or a custom DSL? Since it’s much easier to think positively about the status quo, especially one that is quite liked by the community, I’ll give some example reasons for why building on top of XML might be considered a mistake. Basing a language off XML has one thing going for it: it’s much easier to parse (the core parser is already available), requires much, much less design work, and alternative parsers are also much easier to write for 3rd party developers. But the resulting language can be unsatisfying in various ways. It is rather verbose. If you change the type of something, you need to change it in the closing tag. It has very poor support for comments; it’s impossible to comment out an attribute. There are limitations placed on the content of attributes by XML. The markup extensions have to be built "on top" of the XML syntax, not integrated deeply and nicely into it. And, my personal favourite, if you set something via an attribute, you use completely different syntax than if you set the exact same thing as a content property. It’s also said that since everyone knows XML, XAML requires less learning. Strictly speaking this is true, but learning the syntax is a tiny fraction of the time spent learning a new UI framework; it’s the framework’s concepts that make the curve steep. Besides, the idiosyncracies of an XML-based language might actually add to the "needs learning" basket. Are these disadvantages outweighted by the ease of parsing? Should the next cool framework continue the tradition, or invest the time to design an awesome DSL that can’t be parsed by existing tools and whose syntax needs to be learned by everyone? P.S. Not everyone confuses XAML and WPF, but some do. XAML is the XML-like thing. WPF is the framework with support for bindings, theming, hardware acceleration and a whole lot of other cool stuff.

  Read the article

• Web Safe Area (optimal resolution) for web app design?

  - by M.A.X

  I'm in the process of designing a new web app and I'm wondering for what 'Web Safe Area' should I optimize the app layout and design. By Web Safe Area I mean the actual area available to display the website in the browser (which is influenced by monitor resolution as well as the space taken up by the browser and OS) I did some investigation and thinking on my own but wanted to share this to see what the general opinion is. Here is what I found: Optimal Display Resolution: w3schools web stats seems to be the most referenced source (however they state that these are results from their site and is biased towards tech savvy users) http://www.w3counter.com/globalstats.php (aggregate data from something like 15,000 different sites that use their tracking services) StatCounter Global Stats Display Resolution (Stats are based on aggregate data collected by StatCounter on a sample exceeding 15 billion pageviews per month collected from across the StatCounter network of more than 3 million websites) NetMarketShare Screen Resolutions (marketshare.hitslink.com) (a web analytics consulting firm, they get data from browsers of site visitors to their on-demand network of live stats customers. The data is compiled from approximately 160 million visitors per month) Display Resolution Summary: There is a bit of variation between the above sources but in general as of Jan 2011 looks like 1024x768 is about 20%, while ~85% have a higher resolution of at least 1280x768 (1280x800 is the most common of these with 15-20% of total web, depending on the source; 1280x1024 and 1366x768 follow behind with 9-14% of the share). My guess would be that the higher resolution values will be even more common if we filter on North America, and even higher if we filter on N.American corporate users (unfortunately I couldn't find any free geographically filtered statistics). Another point to note is that the 1024x768 desktop user population is likely lower than the aforementioned 20%, seeing as the iPad (1024x768 native display) is likely propping up those number (the app I'm designing is flash based, Apple mobile devices don't support flash so iPad support isn't a concern). My recommendation would be to optimize around the 1280x768 constraint (*note: 1280x768 is actually a relatively rare resolution, but I think it's a valid constraint range considering that 1366x768 is relatively common and 1280 is the most common horizontal resolution). Browser + OS Constraints: To further add to the constraints we have to subtract the space taken up by the browser (assuming IE, which is the most space consuming) and the OS (assuming WinXP-Win7): Win7 has the biggest taskbar footprint at a height of 40px (XP's and Vista's is 30px) The default IE8 view uses up 25px at the bottom of the screen with the status bar and a further 120px at the top of the screen with the windows title bar and the browser UI (assuming the default 'favorites' toolbar is present, it would instead be 91px without the favorites toolbar). Assuming no scrollbar, we also loose a total of 4px horizontally for the window outline. This means that we are left with 583px of vertical space and 1276px of horizontal. In other words, a Web Safe Area of 1276 x 583 Is this a correct line of thinking? I'm really surprised that I couldn't find this type of investigation anywhere on the web. Lots of websites talk about designing for 1024x768, but that's only half the equation! There is no mention of browser/OS influences on the actual area you have to display the site/app. Any help on this would be greatly appreciated! Thanks. EDIT Another caveat to my line of thinking above is that different browsers actually take up different amounts of pixels based on the OS they're running on. For example, under WinXP IE8 takes up 142px on top of the screen (instead the aforementioned 120px for Win7) because the file menu shows up by default on XP while in Win7 the file menu is hidden by default. So it looks like on WinXP + IE8 the Web Safe Area would be a mere 572px (768px-142-30-24=572)

  Read the article

• WIF-less claim extraction from ACS: JWT

  - by Elton Stoneman

  ACS support for JWT still shows as "beta", but it meets the spec and it works nicely, so it's becoming the preferred option as SWT is losing favour. (Note that currently ACS doesn’t support JWT encryption, if you want encrypted tokens you need to go SAML). In my last post I covered pulling claims from an ACS token without WIF, using the SWT format. The JWT format is a little more complex, but you can still inspect claims just with string manipulation. The incoming token from ACS is still presented in the BinarySecurityToken element of the XML payload, with a TokenType of urn:ietf:params:oauth:token-type:jwt: <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust">   <t:Lifetime>     <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:39:55.337Z</wsu:Created>     <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:19:55.337Z</wsu:Expires>   </t:Lifetime>   <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">     <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">       <Address>http://localhost/x.y.z</Address>     </EndpointReference>   </wsp:AppliesTo>   <t:RequestedSecurityToken>     <wsse:BinarySecurityToken wsu:Id="_1eeb5cf4-b40b-40f2-89e0-a3343f6bd985-6A15D1EED0CDB0D8FA48C7D566232154" ValueType="urn:ietf:params:oauth:token-type:jwt" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">[ base64string ] </wsse:BinarySecurityToken>   </t:RequestedSecurityToken>   <t:TokenType>urn:ietf:params:oauth:token-type:jwt</t:TokenType>   <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType>   <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> The token as a whole needs to be base-64 decoded. The decoded value contains a header, payload and signature, dot-separated; the parts are also base-64, but they need to be decoded using a no-padding algorithm (implementation and more details in this MSDN article on validating an Exchange 2013 identity token). The values are then in JSON; the header contains the token type and the hashing algorithm: "{"typ":"JWT","alg":"HS256"}" The payload contains the same data as in the SWT, but JSON rather than querystring format: {"aud":"http://localhost/x.y.z" "iss":"https://adfstest-bhw.accesscontrol.windows.net/" "nbf":1346398795 "exp":1346404795 "http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant":"2012-08-31T07:39:53.652Z" "http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod":"http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows" "http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname":"xyz" "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress":"[email protected]" "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn":"[email protected]" "identityprovider":"http://fs.svc.x.y.z.com/adfs/services/trust"} The signature is in the third part of the token. Unlike SWT which is fixed to HMAC-SHA-256, JWT can support other protocols (the one in use is specified as the "alg" value in the header). How to: Validate an Exchange 2013 identity token contains an implementation of a JWT parser and validator; apart from the custom base-64 decoding part, it’s very similar to SWT extraction. I've wrapped the basic SWT and JWT in a ClaimInspector.aspx page on gitHub here: SWT and JWT claim inspector. You can drop it into any ASP.Net site and set the URL to be your redirect page in ACS. Swap ACS to issue SWT or JWT, and using the same page you can inspect the claims that come out.

  Read the article

• Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

  - by Solom

  I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

  Read the article

• Looking into CSS3 Multiple backgrounds

  - by nikolaosk

  In this post I will be looking into a great feature in CSS3 called multiple backgrounds.With CSS3 ourselves as web designers we can specify multiple background images for box elements, using nothing more than a simple comma-separated list. This is a very nice feature that can be useful in many websites.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for CSS 3 Multiple backgrounds from the latest versions of modern browsers.Please have a look in this link All modern browsers support this feature. I am typing this very simple HTML 5 markup with an internal CSS style.<!DOCTYPE html><html lang="en">  <head>    <title>Sold items</title>        <style>                #box{        border:1px solid #afafaf;        width:260px;        height:290px;        background-image:url(shirt.png), url(sold.jpg);        background-position: center bottom, right top;        background-repeat: no-repeat, no-repeat;    </style>    </head>  <body>    <header>                <h1>CSS3 Multiple backgrounds</h1>    </header>           <div id="box">              </div>        <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html>  Let me explain what I do here, multiple background images are specified using a comma-separated list of values for the background-image property.A comma separated list is also used for the other background properties such as background-repeat, background-position .So in the next three lines of CSS code         background-image:url(shirt.png), url(sold.jpg);        background-position: center bottom, right top;        background-repeat: no-repeat, no-repeat; we have 2 images placed in the div element. The first is placed center bottom in the div element and the second is placed at right top position inside the div element.Both images do not get repeated.I view the page in IE 10 and all the latest versions of Opera,Chrome and Firefox.Have a look at the picture below. Hope it helps!!!!

  Read the article

• At what point does "constructive" criticism of your code become unhelpful?

  - by user15859

  I recently started as a junior developer. As well as being one of the least experienced people on the team, I'm also a woman, which comes with all sorts of its own challenges working in a male-dominated environment. I've been having problems lately because I feel like I am getting too much unwarranted pedantic criticism on my work. Let me give you an example of what happened recently. Team lead was too busy to push in some branches I made, so he didn't get to them until the weekend. I checked my mail, not really meaning to do any work, and found that my two branches had been rejected on the basis of variable names, making error messages more descriptive, and moving some values to the config file. I don't feel that rejecting my branch on this basis is useful. Lots of people were working over the weekend, and I had never said that I would be working. Effectively, some people were probably blocked because I didn't have time to make the changes and resubmit. We are working on a project that is very time-sensitive, and it seems to me that it's not helpful to outright reject code based on things that are transparent to the client. I may be wrong, but it seems like these kinds of things should be handled in patch type commits when I have time. Now, I can see that in some environments, this would be the norm. However, the criticism doesn't seem equally distributed, which is what leads to my next problem. The basis of most of these problems was due to the fact that I was in a codebase that someone else had written and was trying to be minimally invasive. I was mimicking the variable names used elsewhere in the file. When I stated this, I was bluntly told, "Don't mimic others, just do what's right." This is perhaps the least useful thing I could have been told. If the code that is already checked in is unacceptable, how am I supposed to tell what is right and what is wrong? If the basis of the confusion was coming from the underlying code, I don't think it's my responsibility to spend hours refactoring a whole file that someone else wrote (and works perfectly well), potentially introducing new bugs etc. I'm feeling really singled out and frustrated in this situation. I've gotten a lot better about following the standards that are expected, and I feel frustrated that, for example, when I refactor a piece of code to ADD error checking that was previously missing, I'm only told that I didn't make the errors verbose enough (and the branch was rejected on this basis). What if I had never added it to begin with? How did it get into the code to begin with if it was so wrong? This is why I feel so singled out: I constantly run into this existing problematic code, that I either mimic or refactor. When I mimic it, it's "wrong", and if I refactor it, I'm chided for not doing enough (and if I go all the way, introducing bugs, etc). Again, if this is such a problem, I don't understand how any code gets into the codebase, and why it becomes my responsibility when it was written by someone else, who apparently didn't have their code reviewed. Anyway, how do I deal with this? Please remember that I said at the top that I'm a woman, and I'm sure these guys don't usually have to worry about decorum when they're reviewing other guys' code, but honestly that doesn't work for me, and it's causing me to be less productive. I'm worried that if I talk to my manager about it, he'll think I can't handled the environment, etc.

  Read the article

• If the model is validating the data, shouldn't it throw exceptions on bad input?

  - by Carlos Campderrós

  Reading this SO question it seems that throwing exceptions for validating user input is frowned upon. But who should validate this data? In my applications, all validations are done in the business layer, because only the class itself really knows which values are valid for each one of its properties. If I were to copy the rules for validating a property to the controller, it is possible that the validation rules change and now there are two places where the modification should be made. Is my premise that validation should be done on the business layer wrong? What I do So my code usually ends up like this: <?php class Person { private $name; private $age; public function setName($n) { $n = trim($n); if (mb_strlen($n) == 0) { throw new ValidationException("Name cannot be empty"); } $this->name = $n; } public function setAge($a) { if (!is_int($a)) { if (!ctype_digit(trim($a))) { throw new ValidationException("Age $a is not valid"); } $a = (int)$a; } if ($a < 0 || $a > 150) { throw new ValidationException("Age $a is out of bounds"); } $this->age = $a; } // other getters, setters and methods } In the controller, I just pass the input data to the model, and catch thrown exceptions to show the error(s) to the user: <?php $person = new Person(); $errors = array(); // global try for all exceptions other than ValidationException try { // validation and process (if everything ok) try { $person->setAge($_POST['age']); } catch (ValidationException $e) { $errors['age'] = $e->getMessage(); } try { $person->setName($_POST['name']); } catch (ValidationException $e) { $errors['name'] = $e->getMessage(); } ... } catch (Exception $e) { // log the error, send 500 internal server error to the client // and finish the request } if (count($errors) == 0) { // process } else { showErrorsToUser($errors); } Is this a bad methodology? Alternate method Should maybe I create methods for isValidAge($a) that return true/false and then call them from the controller? <?php class Person { private $name; private $age; public function setName($n) { $n = trim($n); if ($this->isValidName($n)) { $this->name = $n; } else { throw new Exception("Invalid name"); } } public function setAge($a) { if ($this->isValidAge($a)) { $this->age = $a; } else { throw new Exception("Invalid age"); } } public function isValidName($n) { $n = trim($n); if (mb_strlen($n) == 0) { return false; } return true; } public function isValidAge($a) { if (!is_int($a)) { if (!ctype_digit(trim($a))) { return false; } $a = (int)$a; } if ($a < 0 || $a > 150) { return false; } return true; } // other getters, setters and methods } And the controller will be basically the same, just instead of try/catch there are now if/else: <?php $person = new Person(); $errors = array(); if ($person->isValidAge($age)) { $person->setAge($age); } catch (Exception $e) { $errors['age'] = "Invalid age"; } if ($person->isValidName($name)) { $person->setName($name); } catch (Exception $e) { $errors['name'] = "Invalid name"; } ... if (count($errors) == 0) { // process } else { showErrorsToUser($errors); } So, what should I do? I'm pretty happy with my original method, and my colleagues to whom I have showed it in general have liked it. Despite this, should I change to the alternate method? Or am I doing this terribly wrong and I should look for another way?

  Read the article

• Life at Oracle Russia: Stanislav, Tech Sales Manager

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Oracle is a place that brings together talented people from various countries and with a diversity of backgrounds. We often invite our employees to speak about their life at Oracle as we think It is important to share an insight into what working for our company looks like. This time we asked Stanislav to speak about his experience at Oracle. He is Technology Sales Manager at Oracle Russia. He joined the company in July 2011 as a Sales Representative for the Financial sector and had previously worked for another American IT company. He was promoted to a Management position in 2013. “I have been in this Industry for 15 years and I am now Technology Sales Manager, covering Database, BI and Fusion Middleware products. What I’ve learned in my role is that respect is one of the most important values a good professional should have. By respecting and embracing everyone’s opinions, we create a very good work environment that encourages innovation and change. It eventually leads to a stronger team where people listen to each other and value each other’s opinion. On the other hand, It is mandatory to have good knowledge about the area you work in and to continously seek to improve your expertise. Last but not least, working as a team is a top priority and It is something that I’ve learned at Oracle. There’s little you can achieve by yourself comparing to what you can do when you’re part of a team.” Stanislav shared the top three words that best describe his team and those were: professional, dynamic and smart. “The team I manage is a very professional, dynamic and smart one. I am really proud to work with such talented people! They are an asset to the Oracle business because they are the very best in the IT industry worldwide!” When asked why he would apply at Oracle if he was looking for a job, Stanislav responded “I would say because Oracle is a legend of the IT industry. It is a very dynamic company where you can fulfill your potential and gain extremely valuable knowledge. No doubt this is the number 1 IT company!” We invite you to explore our career opportunities on oracle.com/careers and to discover more stories about the life at Oracle on our blog. You can get the latest updates about careers within Oracle by following Oracle LinkedIn, CareersatOracle Facebook or joinOracleEMEA Twitter. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Proving What You are Worth

  - by Ted Henson

  Here is a challenge for everyone. Just about everyone has been asked to provide or calculate the Return on Investment (ROI), so I will assume everyone has a method they use. The problem with stopping once you have an ROI is that those in the C-Suite probably do not care about the ROI as much as Return on Equity (ROE). Shareholders are mostly concerned with their return on the money the invested. Warren Buffett looks at ROE when deciding whether to make a deal or not. This article will outline how you can add more meaning to your ROI and show how you can potentially enhance the ROE of the company.   First I want to start with a base definition I am using for ROI and ROE. Return on investment (ROI) and return on equity (ROE) are ways to measure management effectiveness, parts of a system of measures that also includes profit margins for profitability, price-to-earnings ratio for valuation, and various debt-to-equity ratios for financial strength. Without a set of evaluation metrics, a company's financial performance cannot be fully examined by investors. ROI and ROE calculate the rate of return on a specific investment and the equity capital respectively, assessing how efficient financial resources have been used. Typically, the best way to improve financial efficiency is to reduce production cost, so that will be the focus. Now that the challenge has been made and items have been defined, let’s go deeper. Most research about implementation stops short at system start-up and seldom addresses post-implementation issues. However, we know implementation is a continuous improvement effort, and continued efforts after system start-up will influence the ultimate success of a system.   Most UPK ROI’s I have seen only include the cost savings in developing the training material. Some will also include savings based on reduced Help Desk calls. Using just those values you get a good ROI. To get an ROE you need to go a little deeper. Typically, the best way to improve financial efficiency is to reduce production cost, which is the purpose of implementing/upgrading an enterprise application. Let’s assume the new system is up and running and all users have been properly trained and are comfortable using the system. You provide senior management with your ROI that justifies the original cost. What you want to do now is develop a good base value to a measure the current efficiency. Using usage tracking you can look for various patterns. For example, you may find that users that are accessing UPK assistance are processing a procedure, such as entering an order, 5 minutes faster than those that don’t.  You do some research and discover each minute saved in processing a claim saves the company one dollar. That translates to the company saving five dollars on every transaction. Assuming 100,000 transactions are performed a year, and all users improve their performance, the company will be saving $500,000 a year. That $500,000 can be re-invested, used to reduce debt or paid to the shareholders.   With continued refinement during the life cycle, you should be able to find ways to reduce cost. These are the type of numbers and productivity gains that senior management and shareholders want to see. Being able to quantify savings and increase productivity may also help when seeking a raise or promotion.

  Read the article

• Parameterized StreamInsight Queries

  - by Roman Schindlauer

  The changes in our APIs enable a set of scenarios that were either not possible before or could only be achieved through workarounds. One such use case that people ask about frequently is the ability to parameterize a query and instantiate it with different values instead of re-deploying the entire statement. I’ll demonstrate how to do this in StreamInsight 2.1 and combine it with a method of using subjects for dynamic query composition in a mini-series of (at least) two blog articles. Let’s start with something really simple: I want to deploy a windowed aggregate to a StreamInsight server, and later use it with different window sizes. The LINQ statement for such an aggregate is very straightforward and familiar: var result = from win in stream.TumblingWindow(TimeSpan.FromSeconds(5))               select win.Avg(e => e.Value); Obviously, we had to use an existing input stream object as well as a concrete TimeSpan value. If we want to be able to re-use this construct, we can define it as a IQStreamable: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value)); The DefineStreamable API lets us define a function, in our case from a IQStreamable (the input stream) and a TimeSpan (the window length) to an IQStreamable (the result). We can then use it like a function, with the input stream and the window length as parameters: var result = avg(stream, TimeSpan.FromSeconds(5)); Nice, but you might ask: what does this save me, except from writing my own extension method? Well, in addition to defining the IQStreamable function, you can actually deploy it to the server, to make it re-usable by another process! When we deploy an artifact in V2.1, we give it a name: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); When connected to the same server, we can now use that name to retrieve the IQStreamable and use it with our own parameters: var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); var result = averageQuery(stream, TimeSpan.FromSeconds(5)); Convenient, isn’t it? Keep in mind that, even though the function “AverageQuery” is deployed to the server, its logic will still be instantiated into each process when the process is created. The advantage here is being able to deploy that function, so another client who wants to use it doesn’t need to ask the author for the code or assembly, but just needs to know the name of deployed entity. A few words on the function signature of GetStreamable: the last type parameter (here: double) is the payload type of the result, not the actual result stream’s type itself. The returned object is a function from IQStreamable<SourcePayload> and TimeSpan to IQStreamable<double>. In the next article we will integrate this usage of IQStreamables with Subjects in StreamInsight, so stay tuned! Regards, The StreamInsight Team

  Read the article

• Removing occurrences of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable? Entire function string removeChars( string str, string remove ){ char[] s = str.toCharArray(); char[] r = remove.toCharArray(); bool[] flags = new bool[128]; // assumes ASCII! int len = s.Length; int src, dst; // Set flags for characters to be removed for( src = 0; src < len; ++src ){ flags[r[src]] = true; } src = 0; dst = 0; // Now loop through all the characters, // copying only if they aren’t flagged while( src < len ){ if( !flags[ (int)s[src] ] ){ s[dst++] = s[src]; } ++src; } return new string( s, 0, dst ); } as you can see, r comes from the remove string. So in my example the remove string has only a size of 3 while my str string has a size of 11. len is equal to the length of the str string. So it would be 11. How can I loop through the r string since it is only size 3? I haven't compiled the code so I can loop through it, but just looking at it I know it won't work. I am thinking they wanted to loop through the r string... in other words they got the length of the wrong string here.

  Read the article

• ADF Mobile - Update through Web Service (with ADF Business Components)

  - by Shay Shmeltzer

  In my previous blog entry I went over the basics of exposing ADF Business Components through service interfaces, and developing a simple ADF Mobile application that access and fetches data from those services. In this entry we'll dive a bit deeper  and address an update scenario through these web service interfaces. You can see the full demo video at the end of the post. In the first steps I show how to add an explicit method execution to fetch a specific record we want to update on the second page of a flow. For an update you'll be invoking a service method and passing the record you want to update as a parameter. As in many other Web services scenarios, we need to provide a complete object of specific type to the method. The ADF Web service data control helps you here by offering an object of this type that you can drag and drop into your page. The next step is to make sure to fill that object with the values you want to update. In the demo we do this through  coding in a backing bean that shows how to use the AdfmfJavaUtilities utility. The code gets the value from one field, gets a pointer to the parallel update field, and then copy from one to the other. At the end of the bean we manually execute the call to the update method on the Web service. Here is the demo: &amp;amp;amp;amp;&amp;lt;span id=&amp;quot;XinhaEditingPostion&amp;quot;&amp;gt;&amp;lt;/span&amp;gt;lt;span id=&amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;quot;&amp;amp;amp;amp;gt;&amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;gt; Here is the code used in the backing bean in the demo above. package a.mobile;import oracle.adfmf.amx.event.ActionEvent;import javax.el.MethodExpression;import javax.el.ValueExpression;import oracle.adfmf.amx.event.ActionEvent;import oracle.adfmf.framework.api.AdfmfJavaUtilities;import oracle.adfmf.framework.model.AdfELContext;public class backing {    public backing() {    }    public void copyAndUpdate(ActionEvent actionEvent) {        // Add event code here...        AdfELContext adfELContext = AdfmfJavaUtilities.getAdfELContext();        ValueExpression ve = AdfmfJavaUtilities.getValueExpression("#{bindings.DepartmentName.inputValue}", String.class);        ValueExpression ve3 =            AdfmfJavaUtilities.getValueExpression("#{bindings.DepartmentName1.inputValue}", String.class);        ve3.setValue(adfELContext, ve.getValue(adfELContext));        ve = AdfmfJavaUtilities.getValueExpression("#{bindings.DepartmentId.inputValue}", int.class);        ve3 = AdfmfJavaUtilities.getValueExpression("#{bindings.DepartmentId1.inputValue}", int.class);        ve3.setValue(adfELContext, ve.getValue(adfELContext));        ve = AdfmfJavaUtilities.getValueExpression("#{bindings.ManagerId.inputValue}", int.class);        ve3 = AdfmfJavaUtilities.getValueExpression("#{bindings.ManagerId1.inputValue}", int.class);        ve3.setValue(adfELContext, ve.getValue(adfELContext));        ve = AdfmfJavaUtilities.getValueExpression("#{bindings.LocationId.inputValue}", int.class);        ve3 = AdfmfJavaUtilities.getValueExpression("#{bindings.LocationId1.inputValue}", int.class);        ve3.setValue(adfELContext, ve.getValue(adfELContext));        MethodExpression me = AdfmfJavaUtilities.getMethodExpression("#{bindings.updateDepartmentsView1.execute}", Object.class, new Class[] {});         me.invoke(adfELContext, new Object[] {});        }    }

  Read the article

• HLSL 5 interpolation issues

  - by metredigm

  I'm having issues with the depth components of my shadowmapping shaders. The shadow map rendering shader is fine, and works very well. The world rendering shader is more problematic. The only value which seems to definitely be off is the pixel's position from the light's perspective, which I pass in parallel to the position. struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; The reason that I used the semantic 'TEXCOORD2' on the light's pixel position is because I believe that the problem lies with Direct3D's interpolation of values between shaders, and I started trying random semantics and also forcing linear and noperspective interpolations. In the world rendering shader, I observed in the pixel shader that the Z value of light_pos was always extremely close to, but less than the W value. This resulted in a depth result of 0.999 or similar for every pixel. Here is the vertex shader code : struct Vertex { float3 position : POSITION; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; cbuffer Camera : register (b0) { matrix world; matrix view; matrix projection; }; cbuffer Light : register (b1) { matrix light_world; matrix light_view; matrix light_projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), world); output.position = mul(output.position, view); output.position = mul(output.position, projection); output.world_pos = mul(float4(input.position, 1.0f), world); output.world_pos = mul(output.world_pos, light_view); output.world_pos = mul(output.world_pos, light_projection); output.texcoord = input.texcoord; output.normal = input.normal; return output; } I suspect interpolation to be the culprit, as I used the camera matrices in place of the light matrices in the vertex shader, and had the same problem. The problem is evident as both of the same vectors were passed to a pixel from the VS, but only one of them showed a change in the PS. I have already thoroughly debugged the matrices' validity, the cbuffers' validity, and the multiplicative validity. I'm very stumped and have been trying to solve this for quite some time. Misc info : The light projection matrix and the camera projection matrix are the same, generated from D3DXMatrixPerspectiveFovLH(), with an FOV of 60.0f * 3.141f / 180.0f, a near clipping plane of 0.1f, and a far clipping plane of 1000.0f. Any ideas on what is happening? (This is a repost from my question on Stack Overflow)

  Read the article

• How do I get 5.1 surround sound working on an Acer Aspire 5738ZG?

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• The long road to bug-free software

  - by Tony Davis

  The past decade has seen a burgeoning interest in functional programming languages such as Haskell or, in the Microsoft world, F#. Though still on the periphery of mainstream programming, functional programming concepts are gradually seeping into the imperative C# language (for example, Lambda expressions have their root in functional programming). One of the more interesting concepts from functional programming languages is the use of formal methods, the lofty ideal behind which is bug-free software. The idea is that we write a specification that describes exactly how our function (say) should behave. We then prove that our function conforms to it, and in doing so have proved beyond any doubt that it is free from bugs. All programmers already use one form of specification, specifically their programming language's type system. If a value has a specific type then, in a type-safe language, the compiler guarantees that value cannot be an instance of a different type. Many extensions to existing type systems, such as generics in Java and .NET, extend the range of programs that can be type-checked. Unfortunately, type systems can only prevent some bugs. To take a classic problem of retrieving an index value from an array, since the type system doesn't specify the length of the array, the compiler has no way of knowing that a request for the "value of index 4" from an array of only two elements is "unsafe". We restore safety via exception handling, but the ideal type system will prevent us from doing anything that is unsafe in the first place and this is where we start to borrow ideas from a language such as Haskell, with its concept of "dependent types". If the type of an array includes its length, we can ensure that any index accesses into the array are valid. The problem is that we now need to carry around the length of arrays and the values of indices throughout our code so that it can be type-checked. In general, writing the specification to prove a positive property, even for a problem very amenable to specification, such as a simple sorting algorithm, turns out to be very hard and the specification will be different for every program. Extend this to writing a specification for, say, Microsoft Word and we can see that the specification would end up being no simpler, and therefore no less buggy, than the implementation. Fortunately, it is easier to write a specification that proves that a program doesn't have certain, specific and undesirable properties, such as infinite loops or accesses to the wrong bit of memory. If we can write the specifications to prove that a program is immune to such problems, we could reuse them in many places. The problem is the lack of specification "provers" that can do this without a lot of manual intervention (i.e. hints from the programmer). All this might feel a very long way off, but computing power and our understanding of the theory of "provers" advances quickly, and Microsoft is doing some of it already. Via their Terminator research project they have started to prove that their device drivers will always terminate, and in so doing have suddenly eliminated a vast range of possible bugs. This is a huge step forward from saying, "we've tested it lots and it seems fine". What do you think? What might be good targets for specification and verification? SQL could be one: the cost of a bug in SQL Server is quite high given how many important systems rely on it, so there's a good incentive to eliminate bugs, even at high initial cost. [Many thanks to Mike Williamson for guidance and useful conversations during the writing of this piece] Cheers, Tony.

  Read the article

< Previous Page | 772 773 774 775 776 777 778 779 780 781 782 783  | Next Page >