Search Results

Search found 26114 results on 1045 pages for 'zend config xml'.

Page 777/1045 | < Previous Page | 773 774 775 776 777 778 779 780 781 782 783 784  | Next Page >

• Groovy JUnit test support

  - by Martin Janicek

  Good news everyone! I've implemented support for the Groovy JUnit tests which basically means you can finally use Groovy in the area where is so highly productive! You can create a new Groovy JUnit test in the New File/Groovy/Groovy JUnit test and it should behave in the same way as for Java tests. Which means if there is no JUnit setup in your project yet, you can choose between JUnit 3 and JUnit 4 template and with respect to your choice the project settings will be changed (in case of the Maven based projects the correct dependencies and plugins are added to the pom.xml and in case of the Ant based project the JUnit dependency is configured). Or if the project is already configured, the correct template will be used. After that the test skeleton is created and you can write your own code and of course run the tests together with the java ones. Some of you were asking for this feature and of course I don't expect it will be perfect from the beginning so I would be really glad to see some constructive feedback about what could be improved and/or redesigned ;] ..at the end I have to say that the feature is not active for the Ant based Java EE projects yet (I'm aware of it and it will be fixed to the NetBeans 7.3 final - actually it will be done in a few days/weeks, just want you to know). But it's already complete in all types of the Maven based projects and also for the Ant based J2SE projects. And as always, the daily build where you can try the feature can be downloaded right here, so don't hesitate to try it!

  Read the article

• Duplicate ping response when running Ubuntu as virtual machine (VMWare)

  - by Stonerain

  I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

  Read the article

• Nautilus ignores / misinterprets view size

  - by BlueZero4

  I noticed that a lot of my folders had suddenly switched to higher view sizes than I had specificied. I was assuming that somehow nautilus had suddenly decided to create per-folder entries for said folders with incorrect view sizes. So I found this question: How to reset all per-folder view settings in nautilus? I found the folder specified in the answer (~/.local/share/gvfs-metadata) and found that it was actually important to delete the files INSIDE the folder, because for some reason deleting the folder itself didn't work for some reason. After doing that, I discovered that the odd setting was for the default view settings, not for a handful of files. Nautilus actually handles the per-folder settings like it should, but it ignores the global folder settings. I want Nautilus to, by default, display all non-specified folders as compact view, 50%. My folders are using the compact setting like I want, but they are not down to 50%. At a guess, they are at 100%. Altering the view size of the icon view can set the compact view to 33%, but I'm not sure by what mechanism this functions. I haven't extensively tested the other view sizes because I don't plan on using them much at all. Next I looked up questions like How do I reset nautilus to the default configuration? I'm expecting the problem to be a corrupted config file or something of the sort, so I hunted down directories like ~/.nautilus, ~/.gconf/apps/nautilus, and ~/.gnome2/nautilus. (I don't have a ~/.nautilus directory, so I'm assuming that's only for older versions.) I attempted to remove the contents of each, but I can't seem to force Nautilus back to default configuration settings. Actually viewing Nautilus's preferences in GConf made the settings look like they were what I wanted them to be, which is odd. I'd like to force Nautilus to default settings, basically. Though if something else will fix it, I'll take it too. I'm not interested in doing a full uninstall, reinstall of Nautilus if I don't have to. ==EDIT1== Turns out that Nautilus just writes the settings in GConf for the heck of it. Nautilus only really uses the settings that it stores in DConf. I did gsettings reset-recursively org.gnome.nautilus, which actually did reset Nautilus to default, but it still doesn't like my view size settings.

  Read the article

• Which architecture should I choose for this project?

  - by Jichao

  I have a project. The server which based on a phone PCI-board is responsible for received phone calls from the customer and then redirect the phone calls to the operators. I have decided to code the server using c++ programming language and qt framework because the PCI-board SDK's interface is c/c++ originated and for the sake of portability. The server need to send the information of the the customer to the operator while ringing the operator and the ui interface of the operator client should be browser-based. Now the key problem is how could the server notify the operator that there is a phone call for he/she. One architecture I have considered is like this, The operator browser client use ajax pooling the web server to check whether there is call to the client; the web server pooling the database server to check whether there is call; the desktop server(c++) wait for the phone calls and set the information in the database. The other operations such as hang up the phone call from the client, retransfer the phone call to the other operator also use this architecture. Then, is there any way other than pooling the server(js code setInterval('getDail', 1000)) to decide whether there is a call to the operator? Is this architecture feasible or should I use some terrific techniques that I do know such as web services,xml-rpc, soap???

  Read the article

• Easy to use JSON Web Service Hosts?

  - by Serguei Fedorov

  I saw this being used by someone in a college class once and cannot find anything that is analogous to it. I am not sure if this is the right place to ask about something like this, but hopefully I can get some direction. I want to write an app which uses web services that can obtain and push data back to the client apps. Right now I am gathering up the design and documentation of this app. Not having to code the web service myself would reduce development time by a lot; instead using an easy to setup web service that will be easy to setup and manage. Either XML based on JSON based is totally fine; though I would prefer JSON for its reduced overhead. Like I said I have seen this demonstrated before; you define the data structure to be stored and how it is treated. I cannot find the person who demonstrated this; hopefully maybe someone can suggest something? The service he used was free with a limited amount of requests allowed. EDIT: He was using an online service to do this not a script which is installed onto an existing web hosting account. Thank you!

  Read the article

• Poor backlink profile - search rankings not updated for 2+ months

  - by fistameeny

  I am carrying out some work on a website that is a PR2 with a few good quality, relevant backlinks (PR4-6). It has a presence on Twitter that is updated regularly, a Google Places listing, and listings on some decent directories (Qype etc). The site was rebuilt into Drupal 7 two months ago, with all the basics done - URL rewriting, XML Sitemap submitted to Google, and most importantly, good quality, structured content. I've noticed that Google is still showing "old" URL's from the previous version of the site that was ditched 8 weeks ago. I think the site may be penalised under the Penguin update, as a previous SEO company created many low quality links from link farms/directories. My question is what the correct way to deal with this is. Bing Webmaster Tools can "disavow" links, and I guess I can attempt to contact the link farms to have them removed. I've already submitted a request to Google to request that we have the penalty removed as we're trying to tidy up a bad history. We submit updated sitemaps to Google and Bing daily, and have built some further decent quality, relevant links. Is there anything further I can do?

  Read the article

• YSLow says certain CSS are not gzipped

  - by rhand

  YSlow keeps on telling me files like http://www.example.com/wp-content/plugins/q-and-a/css/q-a-plus.css?ver=1.0.6.2 are not gzipped while the gzip test tool at Feed the Bot mentions I am all good: Compressed? Yes Compression type gzip Page size (Bytes) 32,493 Compressed size (Bytes) -1 Saving (Bytes) 32,494 Compression % 100% I added this to my .htaccess: # Gzip <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file .(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> #Deflate <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x-javascript application/javascript </ifmodule> The header for the file mentioned states: CF-Cache-Status MISS CF-RAY 13945df90a9a0c1d-AMS Cache-Control public, max-age=2592000 Connection keep-alive Content-Encoding gzip Content-Type application/javascript Date Thu, 12 Jun 2014 07:34:38 GMT Expires Sat, 12 Jul 2014 07:34:38 GMT Last-Modified Thu, 21 Feb 2013 01:29:18 GMT Server cloudflare-nginx Transfer-Encoding chunked Vary Accept-Encoding Any ideas what I am missing here?

  Read the article

• Solving &ldquo;XmlSchemaException: The global element '&lt;elementName&gt;' has already been declare

  - by ChrisD

  I recently encountered this error when I attempted to consume a new hosted WCF service.  The service used the Request/Response model and had been properly decorated.  The response and request objects were marked as DataContracts and had a specified namespace.   My WCF service interface was marked as a ServiceContract and shared the namespace attribute value.   Everything should have been fine, right? [ServiceContract(Namespace = "http://schemas.myclient.com/09/12")] public interface IProductActivationService { [OperationContract] ActivateSoftwareResponse ActivateSoftware(ActivateSoftwareRequest request); } well, not exactly.  Apparently the WSDL generator was having an issue: System.Xml.Schema.XmlSchemaException: The global element 'http://schemas.myclient.com/09/12:ActivateSoftwareResponse' has already been declared. After digging I’ve found the problem; the WSDL generator has some reserved suffixes for its entities, including Response, Request, Solicit (see http://msdn.microsoft.com/en-us/library/ms731045.aspx).  The error message is actually the result of a naming conflict.  The WSDL generator uses the namespace of the service to build its reserved types.  The service contract and data contract share a namespace, which coupled with the response/request name suffixes I was using in my class names, resulted in the SchemaException. The Fix: Two options: Rename my data contract entities to use a non-reserved keyword suffix (i.e.  change ActivateSoftwareResponse to ActivateSoftwareResp). or; Change the namespace of the data contracts to differ from the service contract namespace. I chose option 2 and changed all my data contracts to use a “http://schemas.myclient.com/09/12/data” namespace value. This avoided a name collision and I was able to produce my WSDL and consume my service.

  Read the article

• How to distinguish doc, ppt, xls files, without looking at file extension

  - by Shelby. S

  So I was wondering how would you differentiate ppt, xls and doc files from each other in linux regardless of extensions. I tried 'file' but from the looks of it, all of MSOffice files are categorized under the same file type. Similarly I'm having trouble with docx, xlsx and pptx files, since they're essentially all zip files containing a bunch of xml. I also tried a python script importing the magic module, but no go. I'm trying to identify the actual file for a sandbox analysis. And for this specific purpose I need to find the actual file type in order to run it in the sandbox vm (the Windows vm runs everything by extension). Let's say my sample file is labeled as try.exe, but in reality it's just a doc file. My script will rename it as try.exe.doc, which would work fine for doc files. But since linux identifies all MSOffice files as simple DOC files then there's no way to identify ppt or xls files. As a result the sandbox wont' analyze the sample correctly.

  Read the article

• Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

  - by Frank A

  I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

  Read the article

• c# scripting execution with xna (actions take more than 1 frame)

  - by user658091

  I'm trying to figure out how to implement c# scripting into my game (XNA with C#). I will be using C# as the scripting language. My question is, how to call functions that take more than 1 frame to finish? For example: class UserScript : Script { public override void execute(Game game) { //script must wait for dialog to be closed game.openDialog("This is a dialog"); //script should'nt wait for this int goldToGive = 100; goldToGive += 100; game.addGold(goldToGive); // //script should wait for cinematic to end game.startCinematic("name_of_cinematic"); //doesn't wait game.addGold(100); } } I found that you can do that with yield, but I'm not sure if it's the correct way (It's from 2010, the article mentioned no longer exists). http://stackoverflow.com/questions/3540231/implementing-a-simple-xml-based-scripting-language-for-an-xna-game Is yield the answer? If so, can anyone point me any examples/tutorials/books? I haven't found any regarding my situation. If not, what approach should I take? or am I better off with multi-threading?

  Read the article

• Why should I use MSBuild instead of Visual Studio Solution files?

  - by Sid

  We're using TeamCity for continuous integration and it's building our releases via the solution file (.sln). I've used Makefiles in the past for various systems but never msbuild (which I've heard is sorta like Makefiles + XML mashup). I've seen many posts on how to use msbuild directly instead of the solution files but I don't see a very clear answer on why to do it. So, why should we bother migrating from solution files to an MSBuild 'makefile'? We do have a a couple of releases that differ by a #define (featurized builds) but for the most part everything works. The bigger concern is that now we'd have to maintain two systems when adding projects/source code. UPDATE: Can folks shed light on the lifecycle and interplay of the following three components? The Visual Studio .sln file The many project level .csproj files (which I understand an "sub" msbuild scripts) The custom msbuild script Is it safe to say that the .sln and .csproj are consumed/maintained as usual from within the Visual Studio IDE GUI while the custom msbuild script is hand-written and usually consumes the already existing individual .csproj "as-is"? That's one way I can see reduce overlap/duplicate in maintenance... Would appreciate some light on this from other folks' operational experience

  Read the article

• generating maps

  - by gardian06

  This is a conglomeration question when answering please specify which part you are addressing. I am looking at creating a maze type game that utilizes elevation. I have a few features I would like to have, but am unsure as to some of the implementation. I have done work doing fileIO maze generation (using a key to read the file, and then generate the level based on that file), but I am unsure how to think about this with elevation in the mix. I think height maps might be a good approach, but don't know how to represent them effectively. for a height map which is more beneficial XML(containing h[u,v] data and key definition), CSV (item1 is key reference, item2 is elevation), or another approach that I have not thought of yet? When it comes to placing the elevation values themselves what kind of deltah values are appropriate to have it noticeable at about a 60degree angle while not really effecting gravity driven physics (assuming some effect while moving up/down hill)? I am thinking of maybe going to procedural generation at some point, but am wondering if it is practical to have a procedurally generated grid (wall squares possibly same dimensions as the open space squares), or if designing to a thin wall open spaces is better? this decision will effect the amount of work need on the graphics end for uniform vs. irregular walls. EDIT: game will be a elevation maze shooter. levels/maps will be mazes with elevation the player has to negotiate. elevations will have effects on "combat" vision, and movement

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• Accessing Secure Web Services from ADF Mobile

  - by Shay Shmeltzer

  Most of the enterprise Web services you'll access are going to be secured - meaning they'll require you to pass a user/password in order to get to their data.  If you never created a secured Web service, it's simple in JDeveloper! For the below video I just right clicked on a Java class that I exposed as a Web service, and chose  "Web Service Properties" and then checked the "oracle/wss_username_token_service_policy" box from the list of options (that's the option supported by ADF Mobile right now): In the demo below we are going to use a "remote" login server that does the authentication of the user/pass.The easiest way to "create" a remote login server is to create a "regular" web ADF application, secure it, and deploy it on a server. The secured ADF application can just require ADF Authentication with a simple HTTP Basic Authentication - basically the next two images in the Application->Secure->Configure ADF Security menu wizard. ok - so now you have a secured ADF application - deploy it on a server and get the URL for that application.  From this point on you'll see the process in the video which deals with the configuration of your ADF Mobile app. First you'll need to enable security for your ADF mobile application, so it will prompt users to provide a user/pass combination. You'll also need to configure security on specific features. And you can have them use remote login pointing to your regular secured ADF application. Next define your Web service data control. Right click on the web service data control to "define Web Service Security". You'll also need to define the adfCredentialStoreKey property for the Web Service data control in the connections.xml file. This should be it. Here is the flow: If you haven't already - you can read more about this in the Mobile developer guide, and Andrejus has a sample for you.

  Read the article

• Develop in trunk and then branch off, or in release branch and then merge back?

  - by Torben Gundtofte-Bruun

  Say that we've decided on following a "release-based" branching strategy, so we'll have a branch for each release, and we can add maintenance updates as sub-branches from those. Does it matter whether we: develop and stabilize a new release in the trunk and then "save" that state in a new release branch; or first create that release branch and only merge into the trunk when the branch is stable? I find the former to be easier to deal with (less merging necessary), especially when we don't develop on multiple upcoming releases at the same time. Under normal circumstances we would all be working on the trunk, and only work on released branches if there are bugs to fix. What is the trunk actually used for in the latter approach? It seems to be almost obsolete, because I could create a future release branch based on the most recent released branch rather than from the trunk. Details based on comment below: Our product consists of a base platform and a number of modules on top; each is developed and even distributed separately from each other. Most team members work on several of these areas, so there's partial overlap between people. We generally work only on 1 future release and not at all on existing releases. One or two might work on a bugfix for an existing release for short periods of time. Our work isn't compiled and it's a mix of Unix shell scripts, XML configuration files, SQL packages, and more -- so there's no way to have push-button builds that can be tested. That's done manually, which is a bit laborious. A release cycle is typically half a year or more for the base platform; often 1 month for the modules.

  Read the article

• .VBS scripts have stopped running... No idea why!

  - by Django Reinhardt

  We have two .vbs scripts that are run by our Task Scheduler that have suddenly stopped working for no reason we can fathom. We haven't significantly altered our system configuration in the last 24 hours, and the scripts have run without a hitch for months. According to the Task Scheduler the scripts just keep running and never stop, which is never the case. I stopped all running versions through the Scheduler and manually attempted to run one of the .vbs scripts. I got the following error message: Line: 15 Error: The system cannot locate the resource specified. Code: 800C0005 Source: msxml3.dll Line 15 (or 16 to be more accurate - line 15 itself is blank, but so is line 1) is: xml.Send Would could have suddenly caused this? Looking in system32\ and sysWOW64\ shows that msxml3.dll exists. Anybody got any ideas? Thanks a lot!

  Read the article

• Multi subnet in ubuntu with dnsmasq

  - by Fox Mulder

  I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

  Read the article

• Apache expands REQUEST_FILENAME with filetype

  - by Lauer

  I have a .htaccess fil on a Apache22 server. RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)$ /index.php?p=$1 [L] The idea is when the request is /testpage it should be rewritten to /index.php?p=testpage. The problem is that apache does a write before my file, so the actually request is testpage.xml which actually does exists. Therefore, the first RewriteCond is newer true, and my rewrite rule is never applied on the /testpage request. There server should be a standard setup on a FreeBSD server. I know this work on other servers.

  Read the article

• Mcafee Auto-update from UNC path problem

  - by Vicky

  I have a network with 50 computers with no internet access. So instead of updating in each of them using dat file individually I tried to create a shared folder in server, and created a UNC in site repository. I downloaded the file DAT Package For Use with Mcafee AutoUpdate Architect & ePO 3.0 from http://www.mcafee.com/apps/downloads/security-updates/security-updates.aspx. When I try to update it is giving an error Error occurred while downloading file SiteStat.xml. So how fix it?

  Read the article

• How to customize web-app (pages and UI) for different customers

  - by demoncodemonkey

  We have an ASP.NET web-application which has become difficult to maintain, and I'm looking for ideas on how to redesign it. It's an employee administration system which can be highly customized for each of our customers. Let me explain how it works now: On the default page we have a menu where a user can select a task, such as Create Employee or View Timesheet. I'll use Create Employee as an example. When a user selects Create Employee from the menu, an ASPX page is loaded which contains a dynamically loaded usercontrol for the selected menuitem, e.g. for Create Employee this would be AddEmployee.ascx If the user clicks Save on the control, it navigates to the default page. Some menuitems involve multiple steps, so if the user clicks Next on a multi-step flow then it will navigate to the next page in the flow, and so on until it reaches the final step, where clicking Save navigates to the default page. Some customers may require an extra step in the Create Employee flow (e.g. SecurityClearance.ascx) but others may not. Different customers may use the same ASCX usercontrol, so in the AddEmployee.OnInit we can customize the fields for that customer, i.e. making certain fields hidden or readonly or mandatory. The following things are customizable per customer: Menu items Steps in each flow (ascx control names) Hidden fields in each ascx Mandatory fields in each ascx Rules relating to each ascx, which allows certain logic to be used in the code for that customer The customizations are held in a huge XML file per customer, which could be 7500 lines long. Is there any framework or rules-engine that we could use to customize our application in this way? How do other applications manage customizations per customer?

  Read the article

• Schedled Tasks and Environment Variables

  - by Andrew J. Brehm

  I have a scheduled task, a batch file, that uses an environment variables which is set system-wide. On server 1, the scheduled task runs under a domain account and the environment variable works. The environment variable also exists in my session and when I runas as the service account. On server 2, the scheduled task runs under a different domain account and the environment variable DOES NOT work. However, the environment variable does exist in my session and when I runas as the service account. On both servers the environment variable has been set system-wide by the same script originally. The script runs again every now and then and as far as I can see noone has tempered with the environment variable. The scheduled tasks are set up identically on the two servers (using the same XML file) and the two service accounts are identically configured (as far as I know). What am I doing wrong?

  Read the article

• I Can't run the Netbeans but I installed successfully

  - by David

  I'm new to Ubuntu as well as Netbeans. I installed Netbeans, and I've made sure to install all the JDKs and JREs I could find. It installed without errors. I also saw this question and made sure I followed all the instructions there as well. I never got any error messages of any kind. So far as I know, it installed okay. However, when I try to run Netbeans, I get the message in the bottom of the Netbeans IDE like this: ant -f /root/NetBeansProjects/samp1 -Djsp.includes=/root/NetBeansProjects/samp1/build/web/one.jsp -DforceRedeploy=false -Dclient.urlPart=/one.jsp -Ddirectory.deployment.supported=true -Djavac.jsp.includes=org/apache/jsp/one_jsp.java -Dnb.wait.for.caches=true run /root/NetBeansProjects/samp1/nbproject/build-impl.xml:774: The libs.CopyLibs.classpath property is not set up. This property must point to org-netbeans-modules-java-j2seproject-copylibstask.jar file which is part of NetBeans IDE installation and is usually located at <netbeans_installation>/java<version>/ant/extra folder. Either open the project in the IDE and make sure CopyLibs library exists or setup the property manually. For example like this: ant -Dlibs.CopyLibs.classpath=a/path/to/org-netbeans-modules-java-j2seproject-copylibstask.jar BUILD FAILED (total time: 0 seconds)

  Read the article

• What is the best type of c# timer to use with a Unity game that uses many timers simultaneously?

  - by Kyle Seidlitz

  I am developing a stand-alone 3d game in Unity that will have anywhere from 1 to 200 timers running simultaneously. There will be a GameObject containing 1 timer. For this game timer durations will range from 5 minutes to 4 days. There will not be any countdown displays or any UI for the timers. Each object is a prefab, with all the necessary materials included. An attached script will handle the timer and all the necessary code to change the materials and make any sound effects. Once the timer is expired, the user will then click on the object again, and the object will be destroyed, and the user's inventory will be adjusted. If the user wants to save or end the game before all the timers are done, the start value of the still running timers is to be saved to an XML file such that when the game is started again, any still running timers will be checked to see if they have expired, where the object's materials will be changed appropriately. I am still trying to figure out what type of timer to use, and see also if there are any suggestions for saving and calculating times over several days. What class(es) of timers should I use? Are there any special issues I should look out for in terms of performance?

  Read the article

• ReSharper 7.1 update

  - by TATWORTH

  Jet Brains have announced ReSharper 7.1: a considerable update to the powerful .NET developer productivity tool for Visual Studio. They invite you to download ReSharper 7.1 and take it for a free 30-day trial. I urge you to try this excellent Visual Studio add-on. Here is their announcement: Following this update, ReSharper 7 brings even more value to all .NET developers, such as more ways to refactor, inspect, clean up, review and generate code. Feature highlights of ReSharper 7 now include: Full integration with Visual Studio 2012 while maintaining support for Visual Studio 2005, 2008, and 2010.Performance and bug fixes: Since releasing version 7.0 this summer, we have fixed over 300 performance problems and bugs.New code inspections and contract annotations for a more robust .NET code quality analysis. Sharing ReSharper code inspection results with teammates has been streamlined as well for the purposes of code review.Improved tooling for .NET code maintenance including the top requested Extract Class refactoring that helps decrease code complexity, as well as a way to remove unused assembly references across the entire solution.Enhanced code formatter: We have implemented some of the most demanded code formatter improvements so far. For example, ReSharper 7.1 is able to format XML doc comments and chained method calls.Additional code exploration features helping visualize hierarchies of polymorphic members and CSS styles.An extended and fine-tuned code generation toolset. In terms of support for specific technologies and frameworks, ReSharper 7 is on the cutting edge as well, providing: Support for VB.NET refined with the Extract Class refactoring, new quick-fixes and improved IntelliSense.XAML support considerably enhanced in terms of code completion, typing assistance, naming style control, and code generation.An extensive pack of functionality for developers looking to create Windows Store applications for Windows 8.INotifyPropertyChanged interface support pack to improve productivity of Windows Forms, WPF and Silverlight application developers.Extended web development toolset, including improvements to JavaScript support, and initial support for ASP.NET 4.5 and ASP.NET MVC 4.Addition of two previously unsupported Microsoft development technologies: LightSwitch and SharePoint. For details on features and improvements in ReSharper 7 and a 30-day free trial, please read What's New in ReSharper 7.

  Read the article

< Previous Page | 773 774 775 776 777 778 779 780 781 782 783 784  | Next Page >