Search Results

Search found 44907 results on 1797 pages for 'how to change the screen'.

Page 78/1797 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• Dual Monitors for Windows 8

  - by antonio081014

  I have one monitor and a projector connecting to my computer, while the screen keep flashing after every 10 seconds, it seems the resolution keeps changing. The project is the a dual display for the monitor. They displays the same content. My current resolution is 1024*768, while after 10 seconds around, the resolution goes to something big, then after a few seconds, it goes back to 1024*768. I wonder if this is a problem about the resolution, or it's about the compatible of screen display?

  Read the article

• xp mode in Windows 7 - capture mouse?

  - by Mike Blandford

  I'm running Windows 7 but it doesn't quite work right with Starcraft. (Colors are messed up). So I installed Windows XP Mode and I can get it to play starcraft but it changes the resolution to 640x480 and it does not stretch - so it's running in a tiny window in the middle of my screen. (If I resize the VM then the screen either goes blank, or it doesn't resize the contents) Also the mouse isn't captured - the mouse can go inside/outside the virtual pc easily, and it should get stuck on the edges.

  Read the article

• I want to transfer what I see on iPad app to the PC, is there a way?

  - by Jian Lin

  I have an iPad app that shows some good picture, and I want to transfer some pictures to the PC so I can send them by email to other people. Is there a way to capture the screen and save it as PNG or JPG? Otherwise, is the only way to install an iPad SDK (software development kit) so that you have a virtual iPad on the computer and run the app, and then use screen capture program on the PC to do the capture?

  Read the article

• .screenrc - multiple regions on launch

  - by Rob B

  I know it's possible, but I can't for the life of me figure out how, to launch screen with one window in split region mode? ie: I have screen set to open multiple windows on launch, but want window 0 to be split into two regions with an application running in each region

  Read the article

• How can I turn off display resolution auto-detection in Windows Vista?

  - by 6502

  At work I've 4 different computers connected using a keyboard/video/mouse switch. Quite often when I switch to windows vista the resolution is totally wrong and I need to get the screen properties dialog, change to another wrong resolution (because the fun part is that the apparently current resolution listed in the dialog is the correct one) then re-switch to the correct resolution. I would really like to just shut that broken resolution autodetection code off. Is there a way to disable screen resolution autodetection in Windows Vista?

  Read the article

• How can I install new boot splash theme into Ubuntu 9.10?

  - by gcc

  I want to change my splash screen. But when I download any splash screen to my computer, I cannot install them. Every time, the computer gives me the same warning "that packet is not a format wanted" -warning like this- I am asking "is there any other way to install splash screens?". Note: I have also used 'Art manager' but it did not work properly.

  Read the article

• Avoid SEO loss after URL structure change

  - by Eric Nguyen

  We recently re-wrote our site from Umbraco to WordPress. This has been done by third-party developers. I have been the project manager and it is my mistake that I haven't notice the change of URLs that affect SEO until now. New site was launch last Thursday. The old URL for a "place" (a WordPress custom post type, in case you're WordPress expert and want/ need to point me to another discussion on WP Stackexchange) page is as follows: ourdomain.com/singapore/central/alexandra/an-interesting-place Now it has been changed to ourdomain.com/places/an-interesting-place I have already requested the third-party developers to work rewriting the URLs to emulate the old URL structure. However, it's taking quite a lot of time (we have multiple custom post types e.g. events etc. so it might be complicated; the developers seem quite by blur when I first mentioned rewriting URLs for the custom post types) In the meantime, I wonder if there is a quicker work around for this 1) Use .htaccess to rewrite ourdomain.com/singapore/central/alexandra/an-interesting-place to ourdomain.com/places/an-interesting-place This should avoid 90% loss of the search traffic. I suppose I can learn how to do this quite quickly but no harm mentioning it here 2) Use rel="canonical" to indicate that ourdomain.com/places/an-interesting-place is the exact duplicate of ourdomain.com/singapore/central/alexandra/an-interesting-place I will definitely go for both approaches (and also I'm changing 404 page to cater for this temporary isue) but I wonder if 2) is even feasible and if I have missed anything. Is there anything else you could recommend me in this situation. Let me know if my question is not clear anywhere. Clarifications The old website is on a Windows Server EC2 completely separated from the Linux EC2 instance on which the new site is running. In addition, the same domain "ourdomain.com" is used here (an A record is used to point to an EC2 Elastic IP). Therefore, the old server is completely inaccessible at the moment, unless you we use the IP address to old server (which doesn't help me at all in this case). Even if the old server is accessible, I can't see where one can put the .htaccess or a HTML file to do 301 redirect here. Unless I'm successful with my approach 1) or the developers can rewrite the URLs with coding, 404 page is really a choice for me.

  Read the article

• Characteristics of a Web service that promote reusability and change

  Characteristics of a Web service that promote reusability and change:  Standardized Data Exchange Formats (XML, JSON) Standardized communication protocols (Soap, Rest) Promotes Loosely Coupled Systems  Standardized Data Exchange Formats (XML, JSON) XML W3.org defines Extensible Markup Language (XML) as a simplistic text format derived from SGML. XML was designed to solve challenges found in large-scale electronic publishing. In addition,  XML is playing an important role in the exchange of data primarily focusing on data exchange on the web. JSON JavaScript Object Notation (JSON) is a human-readable text-based standard designed for data interchange. This format is used for serializing and transmitting data over a network connection in a structured format. The primary use of JSON is to transmit data between a server and web application. JSON is an alternative to XML. Standardized communication protocols (Soap, Rest) Soap W3Scools.com defines SOAP as a simple XML-based protocol. This protocol lets applications exchange data over HTTP.  SOAP provides a way to communicate between applications running on different operating systems, with different technologies and programming languages. Rest In 2007, Stefan Tilkov defines Representational State Transfer (REST) as a set of principles that outlines how Web standards are supposed to be used.  Using REST in an application will ensure that it exploits the Web’s architecture to its benefit. Promotes Loosely Coupled Systems “Loose coupling as an approach to interconnecting the components in a system or network so that those components, also called elements, depend on each other to the least extent practicable. Coupling refers to the degree of direct knowledge that one element has of another.” (TechTarget.com, 2007) “Loosely coupled system can be easily broken down into definable elements. The extent of coupling in a system can be measured by mapping the maximum number of element changes that can occur without adverse effects. Examples of such changes include adding elements, removing elements, renaming elements, reconfiguring elements, modifying internal element characteristics and rearranging the way in which elements are interconnected.” (TechTarget.com, 2007) References: W3C. (2011). Extensible Markup Language (XML). Retrieved from W3.org: http://www.w3.org/XML/ W3Scools.com. (2011). SOAP Introduction. Retrieved from W3Scools.com: http://www.w3schools.com/soap/soap_intro.asp Tilkov, Stefan. (2007). A Brief Introduction to REST. Retrieved from Infoq.com: http://www.infoq.com/articles/rest-introduction TechTarget.com. (2011). loose coupling. Retrieved from TechTarget.com: http://searchnetworking.techtarget.com/definition/loose-coupling

  Read the article

• How can I prevent an app from leaving full screen mode when I move the cursor to another display?

  - by dan

  When I have dual displays set up, or when I am using Synergy to use one keyboard and mouse across two computers/screens, I can't seem to retain F11 full screen mode for the top application when I mouse out of that screen. This applies to both the application and also to any Flash video that may be playing in full screen mode. Is there any way to retain full screen mode and mouse out of the display?

  Read the article

• How to obtain a camera stream from Unity without rendering it to the player's screen?

  - by aiguy

  I'd like to stream the output of two cameras to a separate process. Right now, it looks like the best way to do that is to grab the rendered camera views from the screen via platform specific screen capture hooks then compress them real time with h.264. Is there a way to grab the input of the cameras within unity and avoid rendering them to the screen? One solution I'm considering involves using Unity's multiplayer capability to run the game on a separate machine and grab it from that screen buffer, unbeknownst to the player.

  Read the article

• What class to use in order to have a number move around the screen?

  - by AllenZ41

  What i am trying to accomplish is have a randomly created number move around the screen but it is touchable. I am planning to have lots of numbers on the screen, so my question is what class is appropriate to use, so I could set a number randomly at run time and display it while it moves around the screen? I was planning the use a TextView, since I want to use a custom font of mine but I think creating a bunch at a time could cause a memory problem and to my understanding they cant move around the screen at runtime.

  Read the article

• Tulsa SharePoint Interest Group - How SharePoint 2010 Business Connectivity Services could change yo

  - by dmccollough

  Bio: Corey Roth is a consultant at Stonebridge specializing in SharePoint solutions in the Oil & Gas Industry. He has ten plus years of experience delivering solutions in the energy, travel, advertising and consumer electronics verticals. Corey has always focused on rapid adoption of new Microsoft technologies including Visual Studio 2010, SharePoint 2010, .NET Framework 4.0, LINQ, and SilverLight. He also contributed greatly to the beta phases of Visual Studio 2005. For his contributions, he was awarded the Microsoft Award for Customer Excellence (ACE). Corey is a graduate of Oklahoma State University. Corey is a member of the .NET Mafia (www.dotnetmafia.com) where he blogs about the latest technology and SharePoint. Abstract: How SharePoint 2010 Business Connectivity Services could change your life - The New BDC How many hours have your wasted building simple ASP.NET applications to do nothing more than simple CRUD operations against a database.  Many tools have made this easier, but now it's so easy, you'll be up and running in minutes.  This session will show you hot easy it is to get started integrating external data from your line of business systems in SharePoint 2010.  You will learn how to register an external content type using SharePoint Designer based upon a database table or web service and then build an external list.  With external lists, you will see how you can perform CRUD operations on your line of business directly from SharePoint without ever having to do manual configuration in XML files.  Finally, we will walk through how to create custom edit forms for your list using InfoPath 2010. Agenda: 6pm - 6:30 Pizza and Mingle - Sponsored by TekSystems 6:30 - 6:45 Announcements 6:45 - 7:45 Presentation! 7:45 - 8:00 Drawings and Door Prizes Location: TCC (Tulsa Community College) Northeast Campus 3727 East Apache Tulsa, OK 74115 918-594-8000 Campus Map | Live | Yahoo | Google | MapQuest Door Prizes: We will be giving away one of each of these: XBox 360 - Halo 3 ODST Telerik Premium Collection ($1300.00 value) ReSharper ($199.00 value) SQLSets ($149.00 value) 64 bit Windows 7 Introducing Windows 7 for Developers Developing Service-Oriented AJAX Applications on the Microsoft Platform Sponsors: Thanks to our sponsors: TekSystems - Thanks for purchasing the Pizza for our meetings. ISOCentric - Thanks for providing us hosting for the groups web site. Tulsa Community College - Thanks for providing us a place to have our meetings. NEVRON - Thanks for providing us prizes to give away. INETA.org - For allowing us to be a Charter Member and providing awesome Speakers! PERPETUUM Software - Thanks for providing us prizes to give away. Telerik - Thanks for providing us prizes to give away. GrapeCity - Thanks for providing us prizes to give away. SQLSets - Thanks for providing us prizes to give away. K2 - Thanks for providing us prizes to give away. Microsoft - For providing us with a lot of support and product giveaways! Orielly books - For providing us with books and discounts. Wrox books - For providing us with books and discounts. Have any special requests? Let us know at this link: http://tinyurl.com/lg5o38. RSVP for this month's meeting by responding to this thread: http://tinyurl.com/yafkzel . (Must be logged in to the site) Be SURE to RSVP no later than Noon on April 12th and you will get an extra entry for the prize drawings! So, do it now, before you forget and miss out! Show up for the first time or bring a new buddy and you both get TWO extra entries!

  Read the article

• How can I change mouse keymapping

  - by zuberuber

  I have Razer DeathAdder(left handed edition) and A4Tech wireless mouse. My problem is I don't know how to change wireless mouse keymapping(swaping left/right click). Can somebody guide me how to do such thing? List of my devices: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech Unifying Device. Wireless PID:4004 id=8 [slave pointer (2)] ? ? Razer Razer DeathAdder id=11 [slave pointer (2)] ? ? A4TECH USB Device id=12 [slave pointer (2)] ? ? A4TECH USB Device id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Logitech USB Keyboard id=9 [slave keyboard (3)] ? Logitech USB Keyboard id=10 [slave keyboard (3)] This is my Razer xinput: Device 'Razer Razer DeathAdder': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 5.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 5426, 22 Device Node (241): "/dev/input/event4" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0 And this is my wireless mouse xinput: Device 'A4TECH USB Device': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 2522, 1359 Device Node (241): "/dev/input/event16" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Horiz Wheel" (245), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0

  Read the article

• Change the Way Google Search Results Display in Firefox

  - by Asian Angel

  Are you tired of the default look for search results at Google? If you want a different and customized pleasing look for them, then join us as we look at the GoogleMonkeyR User Script. Note: User Style Scripts & User Scripts can be added to most browsers but we are using Firefox & the Greasemonkey extension for our example here. Before Here is the standard look for search results at Google…not bad but it really does not stand out that well either. Installing the User Script You may be asking yourself what makes this particular user script different from others. Take a look at the list of goodies that you get access to and you will understand: Multiple columns of results Removes “Sponsored Links” Add numbers to the results Auto-load more results Removes web search dialogues Open links in a new tab Favicons GooglePreview Self updating Can be configured from a simple user dialogue To get started click on the Webpage Install Button. Once you click on the Webpage Install Button you will see the following window asking for confirmation to add the user script to Firefox. Click Install to complete the process. GoogleMonkeyR in Action Refreshing the same search page shown above shows a noticeable difference already. The light blue background makes the search results stand out a bit better. This is an improvement from before but you will definitely want to have a look to see just how far you can go… Right click on the Greasemonkey Status Bar Icon, go to User Script Commands, and select GoogleMonkeyR Preferences. Once you have clicked on GoogleMonkeyR Preferences the search page will be shaded out and you will have access to the user script’s preferences. This is where you can really make your search results unique looking! Here are the changes that we started out with… After refreshing our search results things looked even better. A look at the entire page of results with our browser maximized and set for two columns. If you have the Auto load more results Option enabled new results will be added very quickly as you scroll down. Our set of search results after adding Favicons & GooglePreview Images. Conclusion If you have been wanting a more dramatic and pleasing look for the search results at Google then you can not go wrong with the GoogleMonkeyR User Script. Change as little or as much as you want to get that perfect look in your browser. Link Install the GoogleMonkeyR User Script Download the Greasemonkey extension for Firefox (Mozilla Add-ons) Similar Articles Productive Geek Tips Make Firefox Quick Search Use Google’s Beta Search KeysMake Firefox Built-In Search Box Use Google’s Experimental Search KeysMake Firefox Show Google Results for Default Address Bar SearchesCombine Wolfram Alpha & Google Search Results in FirefoxHow To Run 4 Different Google Searches at Once In the Same Tab TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

  Read the article

• The Winds of Change are a Blowin&rsquo;

  - by Ajarn Mark Caldwell

  For six years I have been an avid and outspoken fan and paying customer of SourceGear products…from Vault to Dragnet to Fortress and on to Vault Professional, but that is all changing now.  Not the fan part, but the paying customer part.  I’m still a huge fan.  I think that SourceGear does a great job with their product and support has been fantastic when needed (which is not very often).  I think that Eric Sink has done a fine job building a quality company and products, and I appreciate his contributions to the tech community through this blogging and books.  I still think their products are high quality and do a fantastic job of what they do.  But there’s the rub…what they do is no longer enough for me. As I have rebuilt our development team over the last couple of years, and we have begun to investigate Scrum and Kanban, I realize that I need more visibility into the progress of the team.  I need better project management tools, and this is where Vault Professional lags behind several other tools.  Granted, in the latest release (Vault 6.0) they added a nice time tracking feature, but I want more.  (Note, I did contact SourceGear about my quest for more, but apparently, the rest of their customer base has not been clamoring for this and so they have not built it.  Granted, I wasn’t clamoring for it either until just recently, but unfortunately for SourceGear, I want it now and don’t want to wait for them to build it into their system.) Ironically, it was SourceGear themselves who started to turn me on to the possibilities of other tools.  They built a limited integration with Axosoft OnTime which I read about several times on their support site (I used to regularly read and occasionally comment on their Support Forum).  I decided to check out OnTime and was very impressed with the tool for work item tracking and project management (not to mention their great Scrum Master in 10 Minutes video).  I fell in love with the capabilities of OnTime.  Unfortunately, the integration with Vault for source control management was, as I mentioned, limited.  I could have forfeited the integration between work items and source code, but there is too much benefit to linking check-ins to work items for me to give that up.  So then I did what was previously unthinkable for me, I considered switching not just the work tracking tool, but also the source code management tool.  This was really stepping outside my comfort zone because source code is Gold, and not to be trifled with.  When you find a good weapon to protect your gold, stick with it. I looked at Git and Tortoise SVN, but the integration methods for those was pretty rough compared to what I was used to.  The recommended tool from Axosoft’s point of view appeared to be RocketSVN, but I really wasn’t sure I wanted to go the “flavor of Subversion” route.  Then I started thinking about that other tool I liked back when I first chose to go with Vault, but couldn’t afford:  Team Foundation Server.  And what do you know…Microsoft has not only radically improved it over that version from back in 2006, but they also came to their senses about how it should be licensed, and it is much more affordable now.  So I started looking into the latest capabilities in the 2012 version, and I fell in love all over again. I really went deep on checking out the tools.  I watched numerous webcasts from Microsoft partners, went to a beta preview on Microsoft’s campus, and watched a lot of Channel 9 videos on the new ALM features (oooh…shiny).  Frankly, I was very impressed with the capabilities of the newest version, and figured this was probably our direction.  As an interesting twist of fate, one of my employees crossed paths with an ALM Consultant from Northwest Cadence, a local Microsoft Partner, and one of the companies that produced several of the webcasts that I had been watching.  So I gave Bryon a call and started grilling him to see if he really knew anything or was just another guy who couldn’t find a job so he called himself a consultant.  It turns out Bryon actually knows a lot, especially in an area that was becoming a frustration point for us: Branching strategies and automated builds (that’s probably a whole separate blog entry).  As we talked, Bryon suggested we look into doing a DTDPS (Developer Tools Deployment Planning Services) session with his company.  This is a service that can be paid for by Microsoft Enterprise Agreement planning services credits or SA training benefits, and, again, coincidentally, we had several that were just about to expire, so I put them to good use. The DTDPS sessions were great; and Bryon, Rick, and the rest of the folks at Northwest Cadence have been a pleasure to work with.  We have just purchased a new server for our TFS rollout and are planning the steps and options right now.  This is still a big project ahead of us to not only install and configure TFS, but also to load all of our source code (many different systems, not just one program) and transition to the new way of life with TFS, but I am convinced that it is the right move for my team at this point in time.  We need the new capabilities that are in alignment with Scrum and Kanban methodologies in order to more efficiently manage all the different projects that we have going on at one time. I would still wholeheartedly endorse SourceGear’s products and Axosoft’s OnTime for those whose needs are met by those tools, but for me and my team, I think that TFS is the right fit, and I am looking forward to the change.

  Read the article

• The Year 2010, The Year of Change

  As I look back on the year of 2010, I could have never predicted the wonderful changes that have occurred for my wife and me. The beginning of this year started out as the 9th year that we lived in South Florida, and my fourth year working for DentalPlans.com as a software engineer/network admin. About 3 months in to the year I was given an excellent opportunity to work for MovieTickets.com in the software engineering department. This opportunity allowed me to gain experience with jQuery due to one of my projects was to reengineering MovieTickets.com existing Marketing Panel System. About 3 months after working at MovieTickets.com, my wife and I were offered an opportunity of a life time. I was offered a Job in a large background\information security company located in Nashville, TN as software engineer II.  I must note that after living in South Florida for 9 years, my wife and I really had a strong distaste for the South Florida life style and the general attitude/culture of the area. Even though we shared a strong dislike for the area in which we lived I must admit that it was a tough decision to leave MovieTickets.com because I was really doing well and I made some great new friends like Chris Catto, and Tyson Nero.  In fact, they introduced me to Local Microsoft User Groups, and software development podcast like DotNetRocks.com and Hanselminutes.com.  In addition, we also went to my first Microsoft launch down in Miami for Visual Studios 2010. I must admit it was a cool experience.  I truly hope to keep in touch with them to see how their careers grow, and I know they will. I must admit I was nervous and excited to start the next chapter in our live as I started up the 26 foot U-Haul truck and got on the road for Nashville from Boca Raton. I knew that the change was going to lead to new adventures and new opportunities that I could never imagine.  As we pulled in to the long driveway of our rental house, we knew that this was the right place for my wife and I. Natalie, my wife had actually come up to Nashville and within one week of my job offer had set up a nice rental home for us to restart our lives in TN.  I must admit that the wonderful southern hospitality took a bit to get use to due to the type of people we were used to dealing with on a regular basis. Our first 2 months seemed like we were living a dream because of our new area and the wonderful people we live around. So far my new job is going really well and I really like the people on my team and department. In fact after 6 months I am now in charge of all application builds for our new deployment process. I am also leading up a push for setting up of continuous integration within our new build process.  In addition to starting my new job, I was also offered a position as an adjust instructor at ITT Tech teaching course like VB.net, Java Script, Ajax, and database development. So far I have really like teaching at the college level.  Information technology has really been great for my life so I am really glad to be able to give back. That is actually why I started DotNetBlocks. This site allows me to document things I have learned as I work with technology, and allows others to borrow from my experiences.  I hope that this site can help others as others have helped me get where I am. Finally, I am glade to report that I only have 4 classes left for my master’s degree at Capella University. I am proud to announce that I am still on track to graduate with 3.91 GPA.  This last class was really a test because I had a crazy idea that I could work full time as a software engineer, teach two college courses as a first time teacher and also take an advanced masters class in application architecture. I have no idea how I actually survived, but I am really surprised how well I actually did. I was invited back to reach again at ITT Tech, and I passed my masters class with an “A”.  I have decided to take this next term off from my master’s program so that I do not get burned out.  Also, so that my new current employer will pay for more of my education, tuition reimbursement is an awesome benefit. This was my year 2010, how was yours?

  Read the article

• Blank black screen with cursor after login -- RHEL5

  - by Sean O.

  I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Changing default openVPN IP in linux server

  - by Lamboo

  The problem is that we have a public OpenVPN service. Pay €9.95 and you get an OpenVPN account at currently half a dozen of servers for a month. This means there are always and will always be some people who create a certain amount of abuse or trouble. On the long run, the external IP every OpenVPN user gets assigned is prohibited from editing Wikipedia, it might be banned by e-gold and on some popular webforums, one-click-hosters, etc. Not a pleasant experience for the 97% of our customers who use our service responsibly and legitimately to regain their privacy. So even if I could change the assigned external IP every few months; e. g. from 216.xx.xx.164 to 216.xx.xx.170, it would help us a lot to combat this abuse and to provide our paying clients with "fresh" IP addresses that aren't banned or restricted on some popular Internet sites and services, yet. Does anybody know how to change the first IP address assigned to the public interface in CentOS? So that e.g. OpenVPN in future doesn't give our OpenVPN clients the external IP 123.xx.xx.164 but rather 123.xx.xx.170?

  Read the article

• C# Performance Pitfall – Interop Scenarios Change the Rules

  - by Reed

  C# and .NET, overall, really do have fantastic performance in my opinion.  That being said, the performance characteristics dramatically differ from native programming, and take some relearning if you’re used to doing performance optimization in most other languages, especially C, C++, and similar.  However, there are times when revisiting tricks learned in native code play a critical role in performance optimization in C#. I recently ran across a nasty scenario that illustrated to me how dangerous following any fixed rules for optimization can be… The rules in C# when optimizing code are very different than C or C++.  Often, they’re exactly backwards.  For example, in C and C++, lifting a variable out of loops in order to avoid memory allocations often can have huge advantages.  If some function within a call graph is allocating memory dynamically, and that gets called in a loop, it can dramatically slow down a routine. This can be a tricky bottleneck to track down, even with a profiler.  Looking at the memory allocation graph is usually the key for spotting this routine, as it’s often “hidden” deep in call graph.  For example, while optimizing some of my scientific routines, I ran into a situation where I had a loop similar to: for (i=0; i<numberToProcess; ++i) { // Do some work ProcessElement(element[i]); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This loop was at a fairly high level in the call graph, and often could take many hours to complete, depending on the input data.  As such, any performance optimization we could achieve would be greatly appreciated by our users. After a fair bit of profiling, I noticed that a couple of function calls down the call graph (inside of ProcessElement), there was some code that effectively was doing: // Allocate some data required DataStructure* data = new DataStructure(num); // Call into a subroutine that passed around and manipulated this data highly CallSubroutine(data); // Read and use some values from here double values = data->Foo; // Cleanup delete data; // ... return bar; Normally, if “DataStructure” was a simple data type, I could just allocate it on the stack.  However, it’s constructor, internally, allocated it’s own memory using new, so this wouldn’t eliminate the problem.  In this case, however, I could change the call signatures to allow the pointer to the data structure to be passed into ProcessElement and through the call graph, allowing the inner routine to reuse the same “data” memory instead of allocating.  At the highest level, my code effectively changed to something like: DataStructure* data = new DataStructure(numberToProcess); for (i=0; i<numberToProcess; ++i) { // Do some work ProcessElement(element[i], data); } delete data; Granted, this dramatically reduced the maintainability of the code, so it wasn’t something I wanted to do unless there was a significant benefit.  In this case, after profiling the new version, I found that it increased the overall performance dramatically – my main test case went from 35 minutes runtime down to 21 minutes.  This was such a significant improvement, I felt it was worth the reduction in maintainability. In C and C++, it’s generally a good idea (for performance) to: Reduce the number of memory allocations as much as possible, Use fewer, larger memory allocations instead of many smaller ones, and Allocate as high up the call stack as possible, and reuse memory I’ve seen many people try to make similar optimizations in C# code.  For good or bad, this is typically not a good idea.  The garbage collector in .NET completely changes the rules here. In C#, reallocating memory in a loop is not always a bad idea.  In this scenario, for example, I may have been much better off leaving the original code alone.  The reason for this is the garbage collector.  The GC in .NET is incredibly effective, and leaving the allocation deep inside the call stack has some huge advantages.  First and foremost, it tends to make the code more maintainable – passing around object references tends to couple the methods together more than necessary, and overall increase the complexity of the code.  This is something that should be avoided unless there is a significant reason.  Second, (unlike C and C++) memory allocation of a single object in C# is normally cheap and fast.  Finally, and most critically, there is a large advantage to having short lived objects.  If you lift a variable out of the loop and reuse the memory, its much more likely that object will get promoted to Gen1 (or worse, Gen2).  This can cause expensive compaction operations to be required, and also lead to (at least temporary) memory fragmentation as well as more costly collections later. As such, I’ve found that it’s often (though not always) faster to leave memory allocations where you’d naturally place them – deep inside of the call graph, inside of the loops.  This causes the objects to stay very short lived, which in turn increases the efficiency of the garbage collector, and can dramatically improve the overall performance of the routine as a whole. In C#, I tend to: Keep variable declarations in the tightest scope possible Declare and allocate objects at usage While this tends to cause some of the same goals (reducing unnecessary allocations, etc), the goal here is a bit different – it’s about keeping the objects rooted for as little time as possible in order to (attempt) to keep them completely in Gen0, or worst case, Gen1.  It also has the huge advantage of keeping the code very maintainable – objects are used and “released” as soon as possible, which keeps the code very clean.  It does, however, often have the side effect of causing more allocations to occur, but keeping the objects rooted for a much shorter time. Now – nowhere here am I suggesting that these rules are hard, fast rules that are always true.  That being said, my time spent optimizing over the years encourages me to naturally write code that follows the above guidelines, then profile and adjust as necessary.  In my current project, however, I ran across one of those nasty little pitfalls that’s something to keep in mind – interop changes the rules. In this case, I was dealing with an API that, internally, used some COM objects.  In this case, these COM objects were leading to native allocations (most likely C++) occurring in a loop deep in my call graph.  Even though I was writing nice, clean managed code, the normal managed code rules for performance no longer apply.  After profiling to find the bottleneck in my code, I realized that my inner loop, a innocuous looking block of C# code, was effectively causing a set of native memory allocations in every iteration.  This required going back to a “native programming” mindset for optimization.  Lifting these variables and reusing them took a 1:10 routine down to 0:20 – again, a very worthwhile improvement. Overall, the lessons here are: Always profile if you suspect a performance problem – don’t assume any rule is correct, or any code is efficient just because it looks like it should be Remember to check memory allocations when profiling, not just CPU cycles Interop scenarios often cause managed code to act very differently than “normal” managed code. Native code can be hidden very cleverly inside of managed wrappers

  Read the article

• Screen scraping software that will traverse pages

  - by nilbus

  We're creating a mashup site that pulls information from many sources all over the web. Many of these sites don't provide RSS feeds or APIs to access the information they provide. This leaves us with screen scraping as our method for collecting the data. There are many scripting tools out there written in different scripting languages for screen scraping that require you to write scraping scripts in the language the scraper was written in. Scrapy, scrAPI, and scrubyt are a few written in Ruby and Python. There are other web-based tools I've seen like Dapper that create XML or RSS feeds based on a webpage. It has a beautiful web-based interface that requires no scripting skills to use. This would be a great tool, if it were able to traverse multiple pages to gather data from hundreds pages of results. We need something that will scrape information from paginated web sites, much like scrubyt, but with a user interface that a non-programmer could use. We'll script up our own solution if we need to, probably using scrubyt, but if there's a better solution out there, we want to use it. Does anything like this exist?

  Read the article

• Vista logs into black screen, "Application Error 0xc0000022" for explorer.exe

  - by IMAPC

  Whenever I attempt to log into a Windows Vista computer (the only account on it), I'm presented with a black screen & a cursor. I can open Task Manager, and from there I can launch applications. It seems to be using Aero Basic (instead of the full Aero which I had set as default before the problem started). When attempting to launch "explorer.exe" I get "explorer.exe - Application Error 'The application failed to initialize properly (0xc0000022). Click OK to terminate the application.'" Every now and then I get an error along the lines of "the application has failed to start because its side by side configuration is incorrect please see the application event log for more detail." I can boot into safe mode successfully, but I still get the black screen when I log into it in regular mode. I've tried most of the suggestions here, but did not work. I'm attempting to back up everything right now in case the only fix is to reinstall Windows. Has anyone seen this before?

  Read the article

• Black Screen and System Hang - Possibly CPU overheating

  - by Mahesh

  I have this old computer - P4 2.0ghz, 1.2GB RAM and onboard graphics(no external card), 80GBHDD. It has xubuntu installed on it and it regularly hangs when it takes more system resources for say like graphical programs, too many tabs on firefox etc. It just either hangs the system or shows black screen. Tested if it was issue of HD but it wasn't because i have used linux livecd and problem is still the same even if I have removed the HD. I have also tested with USB linux (puppy linux and ubuntu linux on 8gb drives). Tested windows XP as well on this HD and results are the same. Tested another HD on this machine, results are still the same with it. System hangs or goes black screen and requires restart. I thought later it could be thermal heat issue and then applied thermal paste on heatsink but still it fails to work for me. It continues to show symptoms. Another thing which was yet to be tested is changing of CPU fan which was not done because I have not found any fan for old pentium 4 machine in the market. I have to hit online stores (but i am in india and it's hard to find it in online shops which can deliver it to me). So far I don't see this as HD or Monitor or OS issue because I have tested with other HD and results are the same. So it could be either CPU fan or motherboard? What could be possible issue with the hardware?

  Read the article

• Missing "log on to" field in Windows 2008 password change dialog

  - by Dmitri Chubarov

  I have to setup an embedded standalone CIFS server outside of domain environment. I shall refer to the server as storage_gateway. The default password setting for the Administrator account is Password must be changed. Until Administrator password is changed other local accounts are disabled. While the server is on default password connecting to a share causes fails with NT_STATUS_PASSWORD_MUST_CHANGE error. $ smbclient -L //storage_gateway -U Administrator session setup failed: NT_STATUS_PASSWORD_MUST_CHANGE I have a mixed Linux/Windows environment and prefer smbclient for diagnostics. To change the password in Windows 2003 Server I could press CTRL-ALT-DEL to get into the Windows Security window and change password for the remote server specifying the server name or ip address (xx.xx.xx.xx) in the system password change dialog. (the name root is just an example, I have edited the dialogs to translate them) However in Windows 2008 the corresponding dialog lacks the Log on to field. Is there a way to change a remote password in Windows 2008 Server/Windows 7?

  Read the article

• How to modify PATH variable for X11 during log-in?

  - by user1028435

  I originally posted this over at StackOverflow, but someone said it might fit better here. Original question is here: http://stackoverflow.com/questions/10096327/overwriting-print-screen-actions-in-linux-without-administrative-rights. Decided to revise my question, based on what I learned there: Essentially, my problem is that I am working on some lab computers (read: no administrative rights) that, if I log in, I need to change the PATH variable as X11 starts. The reason is that I need to change the PATH variable at this time, as opposed to later, is that the Print Screen command seems to "bind" during login (forgive my bad explanation of this). You can see in the work-around I listed in the previous question, that I can make it work by starting a new X, but I was wondering if it is possible to change upon login. If this seems a poor explanation, you can check out the original link for my context and reasoning behind what I'm doing. Any ideas? Details about Distribution: cat /etc/redhat-release tells me: Red Hat Enterprise Linux Client release 5.8 (Tikanga)

  Read the article

• iBook G4 has black screen on boot

  - by Jonathan Patt

  I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >