Search Results

Search found 11313 results on 453 pages for 'ip aliasing'.

Page 78/453 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

  - by Tim Dickerson

  I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

  Read the article

• Rewrite URL based off of IP on OpenWRT

  - by Scott

  We are running OpenWRT on a WRT54GL. I have been looking for an answer to this, but I can't seem to figure out what to search for, if its possible, or what combination of programs to use. I want to be able to redirect a HTTP request from a WiFi device based off of their MAC address. This should all be transparent to the device. Basically we are trying to redirect any non-registered devices to a website to register the device (at this point, we would push a new config to the router that would allow this MAC address "full access"). Once a device is registered, it will be redirected to a transparent squid proxy server on another machine for caching/blocking certain sites. I looked at tinyproxy - popilo which redirects but I won't have the MAC address to know if its registered or not. Any help (google suggestions, programs, anything!) would be very much appreciated!

  Read the article

• centos TCP/IP connection very slow

  - by yuli chika

  I have a VSP (centos6.1 64bit) with 4gb ram. It always runs well, but in recent few days, the server become slowly. open a small css file need 22 seconds(2kb). tested in home/office/phone with (IE,chrome,safari,firefox). see in firebug networking DNS Lookup ?4?ms Connecting ?21.18?s Sending 1?ms Waiting ?115?ms Receiving ?9?ms The connection cost 21.18 seconds I have checked all the log file, there have no error. top commond, still have free memory. top - 00:23:15 up 8 days, 3:57, 1 user, load average: 3.60, 3.42, 3.83 Tasks: 221 total, 4 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 19.3%us, 3.2%sy, 0.0%ni, 76.1%id, 1.4%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4194304k total, 3247724k used, 946580k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32357 mysql 15 0 3710m 835m 6268 S 34.5 20.4 39:14.40 mysqld 9780 apache 15 0 442m 59m 12m S 33.2 1.4 0:05.69 httpd 9842 apache 15 0 403m 26m 10m S 16.9 0.7 0:01.23 httpd 9847 apache 15 0 412m 45m 22m R 15.3 1.1 0:01.00 httpd 9834 apache 15 0 426m 46m 11m R 13.0 1.1 0:02.22 httpd 9891 apache 15 0 407m 43m 19m S 8.0 1.1 0:00.33 httpd 9845 apache 15 0 414m 51m 24m S 6.0 1.3 0:01.53 httpd 9827 apache 15 0 402m 28m 11m S 3.3 0.7 0:02.69 httpd 9768 apache 16 0 414m 51m 24m S 3.0 1.3 0:06.51 httpd 9889 root 15 0 211m 12m 8160 S 2.7 0.3 0:00.32 php 9702 apache 15 0 415m 55m 26m S 1.7 1.4 0:10.67 httpd 9844 apache 15 0 413m 47m 21m S 1.7 1.2 0:01.21 httpd 9697 apache 15 0 414m 51m 24m S 1.3 1.3 0:11.05 httpd 9778 apache 15 0 414m 53m 25m S 1.3 1.3 0:05.38 httpd 9772 apache 15 0 414m 51m 23m R 0.7 1.3 0:05.04 httpd 9823 apache 15 0 415m 50m 23m S 0.7 1.2 0:03.97 httpd 9837 apache 15 0 402m 27m 11m S 0.3 0.7 0:01.04 httpd Then, how to check where is the problem and fixed it? I haven't change and config files in these days. Thanks.

  Read the article

• Apache /folder redirect to different IP

  - by Physikal

  We have a site, www.domain.net running on xxx.xxx.xxx.1, we would like to have a folder/alias of www.domain.net/time redirect to the root of a site at xxx.xxx.xxx.2. How would you do this with apache directives? Examples would be awesome. Or guides. Thank you very much in advance.

  Read the article

• monitoring TCP/IP performance on Solaris

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck?

  Read the article

• Specific IP routing for VPN

  - by Roy

  Is there a way that I can prevent an entire subnet from using internal routing. The VPN server is supposed to be a way to access the company's intranet websites for some people, while for others it is supposed to do routing to the outside only and therefore not having access to any internal websites. The VPN server has a DNS on the actual server but not all should be using this DNS. Some of the users should be directly sent out of the server to the internet. Example: 10.0.0.1 is the DNS on the server, gateway for the VPN 10.0.0.2 is a user (A) on the VPN having access to the intranet websites (subnet is 10.0.0.0/25) 10.0.0.192 is a user (B) only needing routing and no access to intranet websites (subnet is 10.0.0.192/26) All traffic of user B should be directly rerouted out of the server. I have tried several iptables but without success.

  Read the article

• Very long (>300s) request processing time on Apache Server serving static content from particular IP

  - by Ron Bieber

  We are running an Apache 2.2 server for a very large web site. Over the past few months we have been having some users reporting slow response times, while others (including our resources, both on the internal network and our home networks) do not see any degradation in performance. After a ton of investigation, we finally found a "Deny from none" statement in our configuration that was causing reverse DNS lookups (which were timing out) that solved the bulk of our issues, but we still have some customers that we are seeing in the Apache logs (using %D in the log format) with request processing times of 300s for images, css, javascript and other static content. We've checked all Deny / Allow statements for reoccurrence of "none", as well as all other things we know of that would cause reverse DNS lookups (such as using "REMOTE_HOST" in rewrite rules, using %a instead of %h in our log format configuration) as well as verified that HostnameLookups is set to "Off". As an aside, we've also validated that reverse DNS lookups for folks having this problem do not time out - so I'm fairly certain DNS is not an issue in this case. I've run out of ideas. Are there any Apache configuration scenarios that someone can point me to that I might be missing that would cause request times for static content to take so long only for certain users? Thank you in advance.

  Read the article

• nginx 2 symfony2 web application, one ip no domain

  - by Krzysztof Koch

  I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

  Read the article

• Debian 6 Internet connection sharing aka IP masquerade not working

  - by Rautamiekka

  The problem: the computers [Xbox 360 and a Kubuntu 12.04.1 laptop] can't access Internet through a recently-installed desktopless Debian 6 laptop (which is wirelessly connected to a WLAN station) but addresses are successfully given by dnsmasq. The attempts: 1.1) /etc/dnsmaq.conf conffed according to http://wiki.debian.org/HowTo/dnsmasq: add lines interface=eth0 dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 1.2) Follow http://www.cyberciti.biz/faq/rhel-fedora-linux-internet-connection-sharing-howto/ and use their script to setup iptables. 2) Follow the Ubuntu Internet Gateway Method (iptables) at https://help.ubuntu.com/community/Internet/ConnectionSharing recommended and which worked at Share internet in Linux. The Debian laptop was rebooted many times and between each attempt, with and without the script auto-executing via /etc/rc.local. While adding the iptables-restore command to that file I disabled the script.

  Read the article

• Centos: multiple IP addresses

  - by ace

  I just bought 10 extra IPs from my host. How do I point these at my CentOS 5 server?

  Read the article

• Can I query DHCP server for getting mapping of MAC to IP address (I have admin rights)?

  - by Kazoom

  I need to know the MAC to IP address mapping stored on DHCP server. I don't want to use arp cache as that would require me to either broadcast ping (which is not allowed on windows) or ping the all possible ip address of subnet( which takes lot of time). I am sure that DHCP server stores the mapping of MAC to IP, how can i use that information, to map MAC to IP address?

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• InstantSSL's certificate no different than a self signed certificate under Nginx with an IP accessed address

  - by Absolute0

  I ordered an ssl certificate from InstantSSL and got the following pair of files: my_ip.ca-bundle, my_ip.crt I also previously generated my own key and crt files using openssl. I concatenated all the crt files: cat my_previously_generted.crt my_ip.ca_bundle my_ip.crt chained.crt And configured nginx as follows: server { ... listen 443; ssl on; ssl_certificate /home/dmsf/csr/chained.crt; ssl_certificate_key /home/dmsf/csr/csr.nopass.key; ... } I don't have a domain name as per the clients request. When I open the browser with https://my_ip chrome gives me this error: The site's security certificate is not trusted! You attempted to reach my_ip, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site.

  Read the article

• Unable to start sql service when TCP/IP is enabled under SSCM - SS Network Configuration

  - by ebel

  I get error 10048. and this in event history: The SQL server service terminated with server-specific error. Only one usage of each socket (protcol/network address/port) is normall permitted. Any idea howto fix this ? Port set is the default 1433... If this is turned off, which is default of course, SQL service starts like a champ. I have done this config many times on other servers with no problem.

  Read the article

• vmware windows7 professional changing ip addresses

  - by chris hough

  is there a way to fix your windows 7 professional guest host os ipaddress so it does not change every time you startup? I am currently using NAT for networking and would like to remain using this networking method if possible. In older versions of windows this never used to be a problem in vmware so I am wondering if I am missing a setting in windows 7 professional or in vmware. thank you for your help, chris

  Read the article

• SPF include: too many IP addresses

  - by sprezzatura

  I've hit a snag with SPF. The SPF record for my domain will contain four or five entries, plus it will contain: include:sgizmo.com The SPF record for sgizmo.com contains eleven entries! This, plus mine, is way over the maximum ten allowed by the RFC (and probably by most servers). I realize that there has to be a limit in order to prevent DoS attacks. However, in the real world, it is probably not unreasonable for large companies to have many server addresses. Furthermore, must I know monitor my 'include:' counterparts for changes and additions? Must I check weekly, daily, to insure that some combination of changes doesn't suddenly put me over the top? It doesn't seem to me that SPF is suitable for prime time. Is there another way to do this?

  Read the article

• How can I read pcap files in a friendly format?

  - by Tony

  a simple cat on the pcap file looks terrible: $cat tcp_dump.pcap ?ò????YVJ? JJ ?@@.?E<??@@ ?CA??qe?U?????h? .Ceh?YVJ?? JJ ?@@.?E<??@@ CA??qe?U?????z? .ChV?YVJ$?JJ ?@@.?E<-/@@A?CA??9????F???A&? .Ck??YVJgeJJ@@.??#3E<@3{n??9CA??P???F???<K? ??`.Ck??YVJgeBB ?@@.?E4-0@@AFCA??9????F?P????? .Ck???`?YVJ?""@@.??#3E?L@3?I??9CA??P???F????? ???.Ck?220-rly-da03.mx etc. I tried to make it prettier with: sudo tcpdump -ttttnnr tcp_dump.pcap reading from file tcp_dump.pcap, link-type EN10MB (Ethernet) 2009-07-09 20:57:40.819734 IP 67.23.28.65.49237 > 216.239.113.101.25: S 2535121895:2535121895(0) win 5840 <mss 1460,sackOK,timestamp 776168808 0,nop,wscale 5> 2009-07-09 20:57:43.819905 IP 67.23.28.65.49237 > 216.239.113.101.25: S 2535121895:2535121895(0) win 5840 <mss 1460,sackOK,timestamp 776169558 0,nop,wscale 5> 2009-07-09 20:57:47.248100 IP 67.23.28.65.42385 > 205.188.159.57.25: S 2644526720:2644526720(0) win 5840 <mss 1460,sackOK,timestamp 776170415 0,nop,wscale 5> 2009-07-09 20:57:47.288103 IP 205.188.159.57.25 > 67.23.28.65.42385: S 1358829769:1358829769(0) ack 2644526721 win 5792 <mss 1460,sackOK,timestamp 4292123488 776170415,nop,wscale 2> 2009-07-09 20:57:47.288103 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 1 win 183 <nop,nop,timestamp 776170425 4292123488> 2009-07-09 20:57:47.368107 IP 205.188.159.57.25 > 67.23.28.65.42385: P 1:481(480) ack 1 win 1448 <nop,nop,timestamp 4292123568 776170425> 2009-07-09 20:57:47.368107 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 481 win 216 <nop,nop,timestamp 776170445 4292123568> 2009-07-09 20:57:47.368107 IP 67.23.28.65.42385 > 205.188.159.57.25: P 1:18(17) ack 481 win 216 <nop,nop,timestamp 776170445 4292123568> 2009-07-09 20:57:47.404109 IP 205.188.159.57.25 > 67.23.28.65.42385: . ack 18 win 1448 <nop,nop,timestamp 4292123606 776170445> 2009-07-09 20:57:47.404109 IP 205.188.159.57.25 > 67.23.28.65.42385: P 481:536(55) ack 18 win 1448 <nop,nop,timestamp 4292123606 776170445> 2009-07-09 20:57:47.404109 IP 67.23.28.65.42385 > 205.188.159.57.25: P 18:44(26) ack 536 win 216 <nop,nop,timestamp 776170454 4292123606> 2009-07-09 20:57:47.444112 IP 205.188.159.57.25 > 67.23.28.65.42385: P 536:581(45) ack 44 win 1448 <nop,nop,timestamp 4292123644 776170454> 2009-07-09 20:57:47.484114 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 581 win 216 <nop,nop,timestamp 776170474 4292123644> 2009-07-09 20:57:47.616121 IP 67.23.28.65.42385 > 205.188.159.57.25: P 44:50(6) ack 581 win 216 <nop,nop,timestamp 776170507 4292123644> 2009-07-09 20:57:47.652123 IP 205.188.159.57.25 > 67.23.28.65.42385: P 581:589(8) ack 50 win 1448 <nop,nop,timestamp 4292123855 776170507> 2009-07-09 20:57:47.652123 IP 67.23.28.65.42385 > 205.188.159.57.25: . ack 589 win 216 <nop,nop,timestamp 776170516 4292123855> 2009-07-09 20:57:47.652123 IP 67.23.28.65.42385 > 205.188.159.57.25: P 50:56(6) ack 589 win 216 <nop,nop,timestamp 776170516 4292123855> 2009-07-09 20:57:47.652123 IP 67.23.28.65.42385 > 205.188.159.57.25: F 56:56(0) ack 589 win 216 <nop,nop,timestamp 776170516 4292123855> 2009-07-09 20:57:47.668124 IP 67.23.28.65.49239 > 216.239.113.101.25: S 2642380481:2642380481(0) win 5840 <mss 1460,sackOK,timestamp 776170520 0,nop,wscale 5> 2009-07-09 20:57:47.692126 IP 205.188.159.57.25 > 67.23.28.65.42385: P 589:618(29) ack 57 win 1448 <nop,nop,timestamp 4292123893 776170516> 2009-07-09 20:57:47.692126 IP 67.23.28.65.42385 > 205.188.159.57.25: R 2644526777:2644526777(0) win 0 2009-07-09 20:57:47.692126 IP 205.188.159.57.25 > 67.23.28.65.42385: F 618:618(0) ack 57 win 1448 <nop,nop,timestamp 4292123893 776170516> 2009-07-09 20:57:47.692126 IP 67.23.28.65.42385 > 205.188.159.57.25: R 2644526777:2644526777(0) win 0 Well...that is much prettier but it doesn't show the actual messages. I can actually extract more information just viewing the RAW file. What is the best ( and preferably easiest) way to just view all the contents of the pcap file? UPDATE Thanks to the responses below, I made some progress. Here is what it looks like now: tcpdump -qns 0 -A -r blah.pcap 20:57:47.368107 IP 205.188.159.57.25 > 67.23.28.65.42385: tcp 480 0x0000: 4500 0214 834c 4000 3306 f649 cdbc 9f39 [email protected] 0x0010: 4317 1c41 0019 a591 50fe 18ca 9da0 4681 C..A....P.....F. 0x0020: 8018 05a8 848f 0000 0101 080a ffd4 9bb0 ................ 0x0030: 2e43 6bb9 3232 302d 726c 792d 6461 3033 .Ck.220-rly-da03 0x0040: 2e6d 782e 616f 6c2e 636f 6d20 4553 4d54 .mx.aol.com.ESMT 0x0050: 5020 6d61 696c 5f72 656c 6179 5f69 6e2d P.mail_relay_in- 0x0060: 6461 3033 2e34 3b20 5468 752c 2030 3920 da03.4;.Thu,.09. 0x0070: 4a75 6c20 3230 3039 2031 363a 3537 3a34 Jul.2009.16:57:4 0x0080: 3720 2d30 3430 300d 0a32 3230 2d41 6d65 7.-0400..220-Ame 0x0090: 7269 6361 204f 6e6c 696e 6520 2841 4f4c rica.Online.(AOL 0x00a0: 2920 616e 6420 6974 7320 6166 6669 6c69 ).and.its.affili 0x00b0: 6174 6564 2063 6f6d 7061 6e69 6573 2064 ated.companies.d etc. This looks good, but it still makes the actual message on the right difficult to read. Is there a way to view those messages in a more friendly way? UPDATE This made it pretty: tcpick -C -yP -r tcp_dump.pcap Thanks!

  Read the article

• Active Directory with nodes in multiple IP Addresses

  - by Stormshadow

  I have written some code to fetch user information from an Active Directory Server. Suppose the Active Directory Server has nodes, each of which is another Active Directory Installation in a different geographic location. Eg: one AD server in US and another in Australia with a root AD Server in US with the former two as nodes. Would the filter queries I write for searching users across geographic locations work if I run them on the root AD server ?. The query I use is (|(objectClass=user)(objectClass=person)(objectClass=inetOrgPerson)) I cannot actually test this scenario but need to know the what will happen here.

  Read the article

• Active Directory with nodes in multiple IP Addresses

  - by Stormshadow

  I have written some code to fetch user information from an Active Directory Server. Suppose the Active Directory Server has nodes, each of which is another Active Directory Installation in a different geographic location. Eg: one AD server in US and another in Australia with a root AD Server in US with the former two as nodes. Would the filter queries I write for searching users across geographic locations work if I run them on the root AD server ?. The query I use is (|(objectClass=user)(objectClass=person)(objectClass=inetOrgPerson)) I cannot actually test this scenario but need to know the what will happen here.

  Read the article

• DRBD not syncing between my nodes when IP is reset

  - by ramdaz

  I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

  Read the article

• Problem about IP and computer name in Ubuntu

  - by bugbug

  I can't connect to mysql database becase it alway change 192.168.1.101 to ubuntu.local. $ mysql -uroot -padmin1234 -h192.168.1.101 ERROR 1045 (28000) : Access denined for user 'root'@'ubuntu.local' (using password: YES) How do I solve this problem. File: /etc/hosts in this machine 127.0.0.1 localhost 127.0.1.1 ubuntu.ubuntu-domain ubuntu # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I have no idea about "root'@'ubuntu.local", where is it come from.

  Read the article

• Set maximum requests per IP in IIS7

  - by Maxim V. Pavlov

  I have a web site deployed to IIS 7. One page it is has 15+ .js files linked to it. Last two files referenced in <head> tag (loaded last) get 403 forbidden response from server. I have enabled FailedRequestTracing and have been able to see a detailed error code which is 403.502. I suppose over a very short period of time I am just pulling to much and the IIS blocks me. Is there a way I can configure the limit to enable larger number of requests and get rid of 403.502 error?

  Read the article

• Linksys router with multiple external IP's

  - by Adrian Mester

  In an office I've got a network connection with 5 external IPs and a Linksys router (I'm not 100% percent sure of the model). I need 4 of those 5 IPs to be routed to a server, and the fifth to be shared between the other computers at the office. This can probably be done using a switch in front of the router. Connect the server and the router to the switch, and let the router handle the rest of the network. Is there a way to configure the router to route the 4 IPs to the server, and create an internal network the the other computers at the same time?

  Read the article

• Blocking an IP in Webmin

  - by Dan J

  I've been checking my /var/log/secure log recently and have seen the same bot trying to brute force onto my Centos server running webmin. I created a chain + rule in Networking - Linux Firewall: Drop If source is 113.106.88.146 But I'm still seeing the attempted logins in the log: Jun 6 10:52:18 CentOS5 sshd[9711]: pam_unix(sshd:auth): check pass; user unknown Jun 6 10:52:18 CentOS5 sshd[9711]: pam_succeed_if(sshd:auth): error retrieving information about user larry Jun 6 10:52:19 CentOS5 sshd[9711]: Failed password for invalid user larry from 113.106.88.146 port 49328 ssh2 Here is the contents of /etc/sysconfig/iptables: # Generated by webmin *filter :banned-ips - [0:0] -A INPUT -p udp -m udp --dport ftp-data -j ACCEPT -A INPUT -p udp -m udp --dport ftp -j ACCEPT -A INPUT -p udp -m udp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport 20000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp --dport https -j ACCEPT -A INPUT -p tcp -m tcp --dport http -j ACCEPT -A INPUT -p tcp -m tcp --dport imaps -j ACCEPT -A INPUT -p tcp -m tcp --dport imap -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3s -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3 -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp-data -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp -j ACCEPT -A INPUT -p tcp -m tcp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport smtp -j ACCEPT -A INPUT -p tcp -m tcp --dport ssh -j ACCEPT -A banned-ips -s 113.106.88.146 -j DROP COMMIT # Completed # Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed # Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed

  Read the article

• Dnsmasq offering IP via DHCP, but nobody is accepting

  - by Matt

  As clients connect the logs light up with DHCPDISCOVER(wlan0) and DHCPOFFER(wlan0) but the IPs being offered are not being accepted. Currently dnsmasq offers IPs on eth1 which works flawlessly. It seems to be just wlan0 that poses this problem for me today. ifconfig of wlan0: wlan0 Link encap:Ethernet HWaddr aa:aa:aa:aa:aa:aa inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::baa3:86ff:fe70:796a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1609 errors:0 dropped:0 overruns:0 frame:0 TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308739 (301.5 KiB) TX bytes:319185 (311.7 KiB)

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >