Search Results

Search found 29864 results on 1195 pages for 'ubuntu 8 04'.

Page 78/1195 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• /var/lib/ureadahead/debugfs using up disk space

  - by Keyo

  Running Ubuntu 10.04 and nearly all my drive space is gone. # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 7.3G 6.6G 327M 96% / none 245M 240K 244M 1% /dev none 249M 0 249M 0% /dev/shm none 249M 340K 249M 1% /var/run none 249M 0 249M 0% /var/lock none 249M 0 249M 0% /lib/init/rw /dev/sda1 228M 34M 183M 16% /boot Of course it's not mounted. I read that chmod 0 /sbin/debugfs could fix the problem, but now it just won't mount despite changing the permission to 777. This is a VM running on VirtualBox. I have done a file system check which ran fine. What is this directory and how can I remove it from the system?

  Read the article

• Crazy VM clock drift

  - by SimonJGreen

  This is taken from an Ubuntu 10.10 VM running on ESX5: Nov 3 21:58:50 server1 ntpd[21169]: adjusting local clock by 31.187370s Nov 3 22:02:36 server1 ntpd[21169]: adjusting local clock by 31.159808s Nov 3 22:05:18 server1 ntpd[21169]: adjusting local clock by 31.067579s Nov 3 22:07:59 server1 ntpd[21169]: adjusting local clock by 30.952187s Nov 3 22:11:38 server1 ntpd[21169]: adjusting local clock by 30.890147s According to the VMWare KB no kernel tweaks should be needed for Ubuntu 10.10 to maintain time to their standards. What's especially odd is the drift seems fairly consistent. Any help appreciated on this one!

  Read the article

• After closing the ssh terminal, the thin server is down

  - by Keating Wang

  I have a rails project run on the thin server(1.3.1) on a ubuntu server. I ssh to the server and start thin with command 'thin start -C config/thin.yml', following the thin.yml, port: 3000 log: log/thin.log timeout: 30 chdir: /home/byht/56platform/dev/tracker environment: production servers: 1 daemonize: true After thin starts successfully, I visit the project and it works well. Then, I close the terminal, I can also visit the pages that have been visited, but when I visit the pages that not been visited before closing ssh terminal, a "500" error appears on the page. I didn't find the error messages in the log file. I have tried start thin with nohup and sudo, but they are useless. I sign in the ubuntu server locally, then the problem disappears. But I need sign in the server to stat thin with ssh when I'm home.

  Read the article

• Upgrading Ubuntu(32 bit) 10.10 -> 11.04 fails and causes a kernel panic on boot

  - by Ubuntu Upgrade

  On Ubuntu 10.10 machine Upgrade to Ubuntu 11.04 using the update manager. The upgrade fails and leaves the system in an unstable state. When I reboot the system I get a kernel panic on boot. The error points to /opt/abc/runtime/lib/libc.so.6. By researching on this I found that there is a third party software abc causes problem. It has it's own runtime(libc) library. In /lib/ directory there is a link file /lib/ld-abc.so.2 ---/opt/abc/runtime/lib/ld-linux.so.2. If we rename this file to /lib/abc.so.2 or remove this file the the upgrade is success. Here is the upgrade log of where it crashes(apt-term.log) ===== Services restarted successfully. Processing triggers for libc-bin ... ldconfig deferred processing now taking place /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.11' not found (required by /usr/bin/dpkg) /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) ===== Could you please let me know what would be the problem of having a run time link library file in /lib directory. Does the ubuntu upgrade check the 3rd part runtime as well?

  Read the article

• Can't install egenix-mx-base on Django production VPS

  - by Shane

  I have been following these instructions for setting up a Django production server with postgres, apache, nginx, and memcache. My problem is that I cannot get egenix-mx-base to install and without this I cannot get psycopg2 to work and therefore no database access :(. I am attempting this on a VPS running a clean install of Ubuntu Hardy (8.04) and have followed all instructions on the site to a T. The error message is as follows: $ easy_install egenix-mx-base Searching for egenix-mx-base Reading http://pypi.python.org/simple/egenix-mx-base/ Reading http://www.egenix.com/products/python/mxBase/ Reading http://www.lemburg.com/python/mxExtensions.html Reading http://www.egenix.com/ Best match: egenix-mx-base 3.1.3 Downloading http://downloads.egenix.com/python/egenix-mx-base-3.1.3.tar.gz Processing egenix-mx-base-3.1.3.tar.gz Running egenix-mx-base-3.1.3/setup.py -q bdist_egg --dist-dir /tmp/easy_install-iF7qzl/egenix-mx-base-3.1.3/egg-dist-tmp-laxvcS Warning: Can't read registry to find the necessary compiler setting Make sure that Python modules _winreg, win32api or win32con are installed. In file included from mx/TextTools/mxTextTools/mxte.c:42: mx/TextTools/mxTextTools/mxte_impl.h: In function ‘mxTextTools_TaggingEngine’: mx/TextTools/mxTextTools/mxte_impl.h:345: warning: pointer targets in initialization differ in signedness mx/TextTools/mxTextTools/mxte_impl.h:364: warning: pointer targets in initialization differ in signedness mx/URL/mxURL/mxURL.c: In function ‘mxURL_SetFromString’: mx/URL/mxURL/mxURL.c:676: warning: pointer targets in initialization differ in signedness mx/UID/mxUID/mxUID.c: In function ‘mxUID_Verify’: mx/UID/mxUID/mxUID.c:333: warning: pointer targets in passing argument 1 of ‘sscanf’ differ in signedness mx/UID/mxUID/mxUID.c: In function ‘mxUID_New’: mx/UID/mxUID/mxUID.c:462: warning: pointer targets in passing argument 1 of ‘mxUID_CRC16’ differ in signedness error: Setup script exited with error: build/bdist.linux-x86_64-py2.5_ucs4/dumb/egenix_mx_base-3.1.3-py2.5.egg-info: Is a directory Thank you to anyone who takes the time to try to help me.

  Read the article

• dig works but dig +trace <domain_name> not working

  - by anoopmathew

  In my local system i can't get the proper result of dig +trace , but dig works fine. I'm using Ubuntu 10.04 LTS version. I'll attach the result of dig and dig +trace along with this updates. dig +trace gmail.com ; << DiG 9.7.0-P1 << +trace gmail.com ;; global options: +cmd ;; Received 12 bytes from 4.2.2.4#53(4.2.2.4) in 291 ms dig gmail.com ; << DiG 9.7.0-P1 << gmail.com ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 59528 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;gmail.com. IN A ;; ANSWER SECTION: gmail.com. 49 IN A 74.125.236.118 gmail.com. 49 IN A 74.125.236.117 ;; Query time: 302 msec ;; SERVER: 4.2.2.4#53(4.2.2.4) ;; WHEN: Sat Oct 13 14:57:56 2012 ;; MSG SIZE rcvd: 59 Please anyone update a solution for this issue. I'm just worried about my issue.

  Read the article

• PHP5 getrusage() returning incorrect information?

  - by Andrew

  I'm trying to determine CPU usage of my PHP scripts. I just found this article which details how to find system and user CPU usage time (Section 4). However, when I tried out the examples, I received completely different results. The first example: sleep(3); $data = getrusage(); echo "User time: ". ($data['ru_utime.tv_sec'] + $data['ru_utime.tv_usec'] / 1000000); echo "System time: ". ($data['ru_stime.tv_sec'] + $data['ru_stime.tv_usec'] / 1000000); Results in: User time: 29.53 System time: 2.71 Example 2: for($i=0;$i<10000000;$i++) { } // Same echo statements Results: User time: 16.69 System time: 2.1 Example 3: $start = microtime(true); while(microtime(true) - $start < 3) { } // Same echo statements Results: User time: 34.94 System time: 3.14 Obviously, none of the information is correct except maybe the system time in the third example. So what am I doing wrong? I'd really like to be able to use this information, but it needs to be reliable. I'm using Ubuntu Server 8.04 LTS (32-bit) and this is the output of php -v: PHP 5.2.4-2ubuntu5.10 with Suhosin-Patch 0.9.6.2 (cli) (built: Jan 6 2010 22:01:14) Copyright (c) 1997-2007 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies

  Read the article

• Rebuilding old (2010) django project in 2012

  - by birgit

  I am trying to make an old Django project run again. After seemingly having solved issues with old sorl.thumbnail versions and deprecated expressions I now get this error when running python manage.py runserver I also tried to copy & paste my old files into a new Django project and get the exactly same error. Maybe someone here has a clue where the problem lies? Unhandled exception in thread started by <bound method Command.inner_run of <django.contrib.staticfiles.management.commands.runserver.Command object at 0x2a80510>> Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/django/core/management/commands/runserver.py", line 88, in inner_run self.validate(display_num_errors=True) File "/usr/lib/python2.7/dist-packages/django/core/management/base.py", line 249, in validate num_errors = get_validation_errors(s, app) File "/usr/lib/python2.7/dist-packages/django/core/management/validation.py", line 35, in get_validation_errors for (app_name, error) in get_app_errors().items(): File "/usr/lib/python2.7/dist-packages/django/db/models/loading.py", line 146, in get_app_errors self._populate() File "/usr/lib/python2.7/dist-packages/django/db/models/loading.py", line 61, in _populate self.load_app(app_name, True) File "/usr/lib/python2.7/dist-packages/django/db/models/loading.py", line 78, in load_app models = import_module('.models', app_name) File "/usr/lib/python2.7/dist-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/home/me/Documents/wdws/wdws/../wdws/cityofwindows/models.py", line 73, in <module> class Image(models.Model): File "/home/me/Documents/wdws/wdws/../wdws/cityofwindows/models.py", line 83, in Image 'large': {'size': (640, 640)}, File "/usr/lib/python2.7/dist-packages/django/db/models/fields/files.py", line 233, in __init__ super(FileField, self).__init__(verbose_name, name, **kwargs) TypeError: __init__() got an unexpected keyword argument 'extra_thumbnails' I need to re-build the project just for visual documentation locally... so also any hints on how to quickly re-run outdated django-projects are very welcome!! Thanks a lot (using Ubuntu 12.04)

  Read the article

• cURL/PHP Request Executes 50% of the Time

  - by makavelli

  After searching all over, I can't understand why cURL requests issued to a remote SSL-enabled host are successful only 50% or so of the time in my case. Here's the situation: I have a sequence of cURL requests, all of them issued to a HTTPS remote host, within a single PHP script that I run using the PHP CLI. Occasionally when I run the script the requests execute successfully, but for some reason most of the times I run it I get the following error from cURL: * About to connect() to www.virginia.edu port 443 (#0) * Trying 128.143.22.36... * connected * Connected to www.virginia.edu (128.143.22.36) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * error:140943FC:SSL routines:SSL3_READ_BYTES:sslv3 alert bad record mac * Closing connection #0 If I try again a few times I get the same result, but then after a few tries the requests will go through successfully. Running the script after that again results in an error, and the pattern continues. Researching the error 'alert bad record mac' didn't give me anything helpful, and I hesitate to blame it on an SSL issue since the script still runs occasionally. I'm on Ubuntu Server 10.04, with php5 and php5-curl installed, as well as the latest version of openssl. In terms of cURL specific options, CURLOPT_SSL_VERIFYPEER is set to false, and both CURLOPT_TIMEOUT and CURLOPT_CONNECTTIMEOUT are set to 4 seconds. Further illustrating this problem is the fact that the same exact situation occurs on my Mac OS X dev machine - the requests only go through ~50% of the time.

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• Cherokee web server on Ubuntu Lucid

  - by Fazal

  I've been trying to find some decent tutorials on how to set up a recent release of Cherokee webserver on Ubuntu (or equivalent Linux distros) which outline how to setup the webserver, mysql, phpmyadmin and php. Some already exist, such as http://www.howtoforge.com/installing-cherokee-with-php5-and-mysql-support-on-ubuntu-10.04 however, I've found that the Cherokee version used in the tutorial is considerably out of date and the update process has been painful to say the least. Thanks.

  Read the article

• Grub problem with dual boot Ubuntu & XP (Ubuntu installed first)

  - by c00lryguy

  I had Ubuntu installed and I installed XP. I tried to be able to dual boot them by running an Ubuntu live cd and running ~ $ sudo grub grub> root (hd0,0) grub> setup (hd0) But now when I restart I get a black screen that says 'Boot device Selected Boot Device and press any key No matter what key I press it shows this error This is what my system looks like: /dev/sda1 - Ubuntu - ext3 - 73 GiB /dev/sda2 - Ubuntu - extended - 3.16 GiB /dev/sda5 - Ubuntu - linux-swap - 3.16 GiB /dev/sdb1 - Windows XP - ntfs - 76 GiB /dev/sdc1 - Stuff - ext3 - Code/Documents /dev/sdd2 - Stuff - ext3 - Movies/Music

  Read the article

• how to upgrade to openoffice 3.1.1 on ubuntu jaunty

  - by BD at Rivenhill

  I need to read some .docx files and the standard 3.0.1 version of OpenOffice writer that comes with Unbuntu 9.04 just ain't handling it. I tried the instructions from the following site: http://news.softpedia.com/news/How-to-Install-OpenOffice-org-3-1-on-Ubuntu-9-04-111105.shtml, both the GUI steps in the main article, and a scripted version in one of the comments, but my system never seems to do the partial update, and the OpenOffice version is unchanged after I uninstall and reinstall it from the command line. Has anybody had similar problems?

  Read the article

• Ubuntu server boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails.

  Read the article

• To Run Linux (Ubuntu) on Windows 7, is using Virtual PC one of the best ways?

  - by Jian Lin

  I need to try Linux (Ubuntu) and feel hesitant to install Ubuntu on top of a Win 7 machine to dual boot (might need to use Win7 and Ubuntu at the same time). Is creating a Virtual PC on Win7, and then installing the latest Ubuntu on that Virtual PC one of the better option? So I think I can create a Virtual PC with an empty virtual hard disk (vhd), say, for 30GB, and then put in the Ubuntu DVD-R or CD-R to install Ubuntu onto that empty hard disk. Update: for some reason, the first time Ubuntu 10.04 installation CD-R boots up, it asked for the Language, and "Install Ubuntu" and then the screen has vertical green bars and then the VPC just closed. The 2nd or 3rd time it booted up, there is no asking of Language or "Install Ubuntu" and just shut down the VPC, sometimes with vertical green bars. I even created another new hard drive and same thing happened. And created VPC 02, and same thing happened. Created VPC 03 with a fixed hard drive size of 60GB and same thing happened.

  Read the article

• How does Ubuntu One sync two machines with identical file content?

  - by user27449

  I have a notebook and a desktop computer, both running Ubuntu 11.10. I used to sync between the two with the help of Unison, so both computers have identical content in the Documents folder. I decided to try UbuntuOne. My question is, if I activate UbuntuOne for the two machines for the folders with identical contents, will UbuntuOne be able to recognise that, or will it sync to the cloud everything twice (and then down on the other machine). To put it another way, will I end up having two copies of everything on the machines and on the cloud, and therefore should delete the identical files on one of the machines before activating UbuntuOne, or not. Thank you, and if there is already something on the net about this, I'd be glad if somebody posted the link here.

  Read the article

• Is it possible to prioritize which folders get synced first when using Ubuntu One?

  - by Philippe

  I face the problem that u1 syncs my files to a given order. I'd like to change that order. Consider that: On a week end I work and I may also copy the content of my photo SD card onto my notebook. The next time I boot my work computer, I might be sitting there and waiting for some hours until U1 synced/downloaded all the photos to my workstation and the files I need for work are the last in the '--waiting' list. I don't mind if Ubuntu One is a slow downloader, I would be just happy if I could define that all files in a certain folder (and all of it subfolders) always need to be downloaded first. I'm aware that there was once the possibility to move some files to the beginning of the sync list. But that was a very clumsy way with providing the folder id etc. and in the current version of u1 I can't even find it any more. Any suggestions on how to prioritize always the same folder?

  Read the article

• How do you install a USB CD Rom drive in Ubuntu 10.04?

  - by Matt Allen

  Hello, I recently purchased a USB CD ROM drive, but I don't know how to get it to work with my computer which runs Ubuntu 10.04. http://www.amazon.com/gp/product/B00303H908/ref=oss_product When I issue the lsusb command, it shows up as: Bus 002 Device 016: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter The computer doesn't recognize it automatically. How can I get this drive to show up as an actual drive on my computer? If this particular drive can't handle Linux, can you recommended one which can and provide a link to it so I can purchase it? Thanks!

  Read the article

• Getting the Dell XPS 16 Synaptics touchpad to work after hibernation in Ubuntu.

  - by Aron Rotteveel

  I am currently experimenting with using Ubuntu as a my main OS instead of Windows 7. So far, pretty much everything is working fine, except for an issue that I am having with my touchpad. I have a Dell XPS 16 (1640) with a Synaptics touchpad. It works out of the box, but it seems that it stops working after returning from hibernation mode. This problem has also been addressed in an earlier bug, but judging from this bugreport, it should be fixed by now. I am running the 2.6.35-23-generic-pae kernel. Any ideas?

  Read the article

• How do I enable the Ubuntu One tray applet?

  - by Richard Holloway

  I am running 10.04 and I am unable to get a tray applet to appear for Ubuntu One. I am sure there was an applet in 9.04 (Jaunty) and 9.10 (Karmic). I have the package ubuntuone-client-gnome installed which Synaptic tells me "This package contains the tray applet and Nautilus extension, providing integration with the GNOME desktop." The applet is not on the "Add to panel..." list and there doesn't appear to be anything in the menus. So how do I make the applet appear?

  Read the article

• How do I get one monitor on top of the other in Ubuntu 10.10?

  - by Jan

  I'm using a laptop and a monitor (wall mounted) over my laptop. I would like to reflect this physical hardware setup in my software screen setup. So that I can move my mouse upward, out of my laptop screen and use the monitor on the wall. I have been searching for a solution for a while, and I hope somone can help me out. I'm using Ubuntu 10.10 "out of the box". Side by side screen setups works just fine, over/under is doesn't work.

  Read the article

• How do I safely use a virus infected USB drive in Ubuntu?

  - by suhridk

  I have an USB drive which I know is virus infected (an anti-virus on my friend's machine detected it). Unfortunately neither of us know the virus name and I don't want to take the risk of plugging it to my Windows box again. Of course, in all probability the virus affects only Windows. (But I'm not sure) I want to know if I can safely plug the USB into my Ubuntu Lucid laptop and copy the stuff I need from the drive. If there are some precautions I need to follow what would they be?

  Read the article

• trying to install ubuntu touch to nexus 4 - can't connect device (14.04 in virtual box on mac)

  - by Fiona Cox

  I'm trying to install Ubuntu touch to a nexus 4. I've followed all the steps so far, downloaded the packages and gotten the phone ready, but now I got to the step of connecting it to the computer [under 'Enable USB Debugging'], but it's not listed when I try $ adb devices (I tried the 'adb kill-server' command first too, but nothing is listed). I'm sure it's something simple I'm forgetting, but can anyone help please? I have debugging enabled. Running Trusty in VirtualBox on MacBook. Thanks!

  Read the article

• How to reinstall latest Ubuntu Touch on Nexus 4?

  - by Galen Gruman

  I've followed the instructions on https://wiki.ubuntu.com/Touch/Install, first doing the steps that lead to phablet-flash -b and then the manual ones. In both cases, I get stuck at the Google boot screen. It does not boot into Touch. No errors during manual install, and adb devices shows the device, but I get the following with phablet-flash or phablet-flash -b (second and subsequent times, not the first time): Device detected as /system/bin/sh: getprop: not found Unsupported device, autodetect fails device When working on flipped images, detection does not work and would require -d Not clear what that all means. The Nexus 4 had the initial Touch dev preview on it, FYI. I saw no separate instructions for upgrading from that.

  Read the article

• Please help me in installing Ubuntu 12.04.1. and Can it run MS Off. Prof. Plus 2007?

  - by ramandeep

  I want to install Ubuntu with MS Office Professional Plus 2007 running. I want to format my hard drive with slow speed as it happens when we install xp. The all cleaning with no traces left. For that what'll be easy to do: 1) Formatting entire hard drive OR 2) Formatting only that partition on which I want to install Ubuntu? I should be sure that I can run MS Office Professional Plus 2007 on Ubuntu. I have ubuntu-12.04.1-desktop-i386.iso burned on a CD and have MS Office Prof. Plus 2007 in this form - http://i.imgur.com/qAhP8.jpg I also want to know when I update Ubuntu how much MB will it be?

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >