Search Results

Search found 29864 results on 1195 pages for 'ubuntu 8 04'.

Page 76/1195 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Ubuntu 12.04 doesn't detect hard disk partitions

    - by m0skit0
    I just installed Ubuntu 12.04 32-bit on an ASUS Laptop and wanted to install it in another one, the ASUS A55V. After booting the laptop and setting up Windows 7 (I unfortunately cannot wipe out Windows), and creating one extra partition to install Ubuntu there, when I reboot from USB and launch Ubuntu installation, it doesn't recognize any partition on /dev/sda, but shows the whole disk as unpartitioned. I guess this is due to UEFI, but I don't know how I can make Ubuntu see the partitions created by Windows. Or any workaround for this to be able to install Ubuntu on /dev/sda. Thanks in advance

    Read the article

  • Ubuntu/Linux version recommendation for HP dv6 3122TX?

    - by sanjayav
    I purchased a HP dv6 3122TX recently and after installing Ubuntu 10.10 64 bit I ran into multiple issues like, The wireless driver is not supported by Uubntu. (1) [The driver is RaLink RT3090 ] The ethernet stopped working sometimes for no reason [The driver is Realtek RTL8111/8168B ] "Corrupted low memory at ..." issue which is described as a kernel bug in Ubuntu support forums. (It started to take me to a terminal instead of the GUI and couldn't start x server after that) As I'm not an expert Ubuntu user I got fed up of all these issue and got back to Windows 7. But I need an Ubuntu installation up and running for my development work. What are your suggestions about a reasonable Ubuntu version that I should try? Or a different Linux variation? Should I stick to a 32-bit version? It'd be great anyone can give some advice on this issue.

    Read the article

  • Ubuntu not showing hard drive

    - by ojek
    I have a laptop which had a broken installation of Windows 7 installed on it. I created a Ubuntu live USB and tried installing Ubuntu over that Windows 7. After a few minutes, I got an error message, so I needed to restart the computer. Now the laptop says that there is no bootable device - reasonable message given that there was an error during Linux installation. However: BIOS can see my hard drive, When I start Ubuntu in live mode, and try either sudo fdisk -l or gparted, it doesn't show any hard disk drives. I am 90% sure that the hard drive is broken, but it is weird that BIOS can see it, and Ubuntu doesn't. How can I be 100% sure about that hard drive? Is there any additional way of detecting my hard drive from Ubuntu?

    Read the article

  • "Cannot allocate memory " error whle copying data from window to ubuntu

    - by John
    I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

    Read the article

  • run ubuntu from virtual box in an external hard drive

    - by Bhavan
    I would like to run ubuntu on my external hard drive. I have got virtual box installed in the external hard drive and made a machine named ubuntu and installed the latest ubuntu version which i got from the .iso download. Now after much juggling around i got ubuntu running on the machine which i did the whole installation. When i move it to another machine the virtual box just woudnt open. What is the reason for this and how can i get the ubuntu run from whichever machine i plug in the external usb hard disk. Thanks a lot for your answers in advance. Best regards Bhavan

    Read the article

  • rc scripts dependencies

    - by chris
    On a Ubuntu 10.04.1 LTS server install certain services fail to start properly after a reboot. I have a couple of virtual interfaces defined on eth0: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.5.240 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:1 iface eth0:1 inet static address 172.16.5.241 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:2 iface eth0:2 inet static address 172.16.5.242 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:3 iface eth0:3 inet static address 172.16.5.243 netmask 255.255.255.0 gateway 172.16.5.1 and so on... The services that try to bind to for example 172.16.5.243 fail during boot, complaining that there is no such IP address. My questions: 1) Are the services started parallel by default? Can I disable that so they run sequentially? 2) Is there a way to define dependencies between rc scripts? I'm only familiar with the defining the order of seqentially started scripts using the numbers in /etc/rc[0-6].d/) Any other fix or workaround appreciated.

    Read the article

  • PPTP server stuck at "GRE: Bad checksum from pppd"

    - by user92516
    I am a network engineer having quite limited experience with Ubuntu. I have been following up these online instructions to set up a pptp server but without much luck to get it to work. My server is a vm running an Apple Xserve behind a Cisco firewall. I made sure tcp 1723 and GRE are opened for the box. Below is the syslog output, looks like I always got stuck at GRE: Bad checksum from pppd. I'm running Ubuntu 10.04. Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Reaping child PPP[1232] Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Client 166.137.85.165 control connection finished Sep 24 13:22:41 ubuntu pptpd[1276]: MGR: connections limit (100) reached, extra IP addresses ignored Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Manager process started Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Maximum of 100 connections available Sep 24 13:22:50 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection started Sep 24 13:22:51 ubuntu pptpd[1278]: CTRL: Starting call (launching pppd, opening GRE) Sep 24 13:22:51 ubuntu pppd[1279]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Sep 24 13:22:51 ubuntu pppd[1279]: pppd 2.4.5 started by root, uid 0 Sep 24 13:22:51 ubuntu pppd[1279]: Using interface ppp0 Sep 24 13:22:51 ubuntu pppd[1279]: Connect: ppp0 <--> /dev/pts/1 Sep 24 13:22:51 ubuntu pptpd[1278]: GRE: Bad checksum from pppd. Sep 24 13:23:21 ubuntu pppd[1279]: LCP: timeout sending Config-Requests Sep 24 13:23:21 ubuntu pppd[1279]: Connection terminated. Sep 24 13:23:21 ubuntu pppd[1279]: Modem hangup Sep 24 13:23:21 ubuntu pppd[1279]: Exit. Sep 24 13:23:21 ubuntu pptpd[1278]: GRE: read(fd=6,buffer=805a540,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Reaping child PPP[1279] Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection finished

    Read the article

  • wubi dual-boot installation of ubuntu 12.04 on Windows 7 fails to boot

    - by Andrew
    I am trying to use the wubi installation process to create a Ubuntu 12.04 / Windows 7 dual boot setup on my Windows 7 machine (Dell Inspiron 17R). The installation initially works fine, and I am able to load Ubuntu several times after selecting it from the boot menu. However, when I boot into Windows 7 it seems to corrupt the Ubuntu boot process, because after running Windows 7, Ubuntu won't boot on the machine. It is still listed as an option in the boot menu, but when it is selected, the machine does one of the following: -hangs at the load-screen and says that Ubuntu is preparing to run for the first time (although it isn't the first time the OS has been loaded) -hangs with a black screen and does nothing I have uninstalled Ubuntu and then reinstalled it (using wubi) three times. Each time Ubuntu initially boots okay (including rebooting the laptop into Ubuntu several times.) However, whenever I switch over and boot into Windows 7 it breaks the Ubuntu installation. Windows 7 continues to boot and work fine without issues. I have successfully installed Ubuntu using wubi onto a different Windows 7 machine before without problems...it seems that there is something different about this laptop configuration. I am not sure how to debug the issue. I see no error messages during the Ubuntu boot process when it hangs and am not sure how to debug this.

    Read the article

  • Installation of ubuntu(edubuntu,kubuntu,lubuntu,xubuntu,ubuntu-gnome,ubuntu-server) saucy in i386-desktop without internet connection

    - by SRI
    I need to install ubuntu(edubuntu,kubuntu,lubuntu,xubuntu,ubuntu-gnome,ubuntu-server) saucy in i386-desktop without internet connection. I read alternate-CD has been stopped from Saucy. Is there way to download the packages via script and install it ( packages containing all software of above cds). Live-DVD/CD of any version mentioned above containing casper files(pre-installed), but i want to download the packages from internet and install it in the PC without internet.

    Read the article

  • GParted in UBUNTU shows entire disk as UNALLOCATED SPACE

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows, after 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu but still I get the hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but I wasn't able to, since GParted or the Ubuntu installer itself does not recognized my partitions and shows the entire disk as unallocated space. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk!

    Read the article

  • PC shuts down when installing ubuntu?

    - by Robin002
    I'm now using ubuntu from USB, and I'd like to install ubuntu on my hard disk. I tried the option of removing Vista while installing ubuntu. However, near the end of the installation process (presumably the end because I can see some slideshows on how to start using ubuntu), the screen suddenly goes to black with white words running around on it. Soon the computer shuts down. After that, restarting leads to a black screen with only a small white cursor on the top left corner. The cursor keeps blinking and nothing happens. I found that I can alternatively choose to boot with USB by hitting F12 just when the computer starts. So I tried to reinstall ubuntu by running ubuntu on USB. One of the options of installation is to update ubuntu 11.04 to ubuntu 11.04, so it seems the ubuntu is already installed somehow. Anyways, I tried both update and delete and install option but the same thing happens as the 1st time (sometimes before reaching the end), while I still cannot start my PC as ubuntu (without USB). How may I install ubuntu properly?

    Read the article

  • Recommended partitions to migrate from Windows XP to Windows 7 and Ubuntu

    - by Juanillo
    Hello, I have a system with Windows XP. My hard disk has 189 GB NTFS. I want to change the operative system to windows 7, but I want to add Ubuntu as well. As the change might take several days (because I don't have much time) I want to install one system (or Windows 7 or Ubuntu) keeping my windows XP installed in another partition so if something doesn't work in thebrand new operating system installed I can use my Windows XP installation. So I've thouht about doing something like this: Copy the data I want to keep to an external hard disk. Make partitions enough to install windows 7, keep data in another partition and another one to install Ubuntu. Copy the data I want to keep to the partition I've just created. Install Ubuntu in the partitions for Ubuntu. Check if Ubuntu works fine If it works OK install Windows 7 on the partition of Windows XP (Windows XP will be erased). Reinstall the programs in Windows 7. So my question is: How many partitions do you recommend me to have (and the size of each one and NTFS or FAT32)? The operative system I'm going to use more is Windows 7 (though I love Linux I use many programs which are windows dependant). Do you think I should do anything else / change something in the proccess to avoid any problem? I don't know if making the partitions can harm the data I have in the disk. Thanks.

    Read the article

  • Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

    - by user971155
    I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

    Read the article

  • Help with Ubuntu and Windows, separate HDs

    - by LuxuryMode
    Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. I have some pictures of boot up: first one is strange error i get after messing with CMOS to finally get ubuntu install to work. http://imgur.com/5sqJa then boot menu: http://imgur.com/TWtLq then error: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu.

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • How to setup a virtual machine in Ubuntu desktop to run Debian Server

    - by stickman
    I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

    Read the article

  • Postfix connects to wrong relay?

    - by Eric
    I am trying to set up postfix on my ubuntu server in order to send emails via my isp's smtp server. I seem to have missed something because the mail.log tells me: Jan 19 11:23:11 mediaserver postfix/smtp[5722]: CD73EA05B7: to=<[email protected]>, relay=new.mailia.net[85.183.240.20]:25, delay=6.2, delays=5.7/0.02/0.5/0, dsn=4.7.0, status=deferred (SASL authentication failed; server new.mailia.net[85.183.240.20] said: 535 5.7.0 Error: authentication failed: ) The relay "new.mailia.net[85.183.240.20]:25" was not set up by me. I use "relayhost = smtp.alice.de". Why is postfix trying to connect to a different server? Here is my main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mediaserver alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mediaserver, localhost.localdomain, , localhost relayhost = smtp.alice.de mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all myorigin = /etc/mailname inet_protocols = all sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous Output of postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = mediaserver, localhost.localdomain, , localhost myhostname = mediaserver mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = relayhost = smtp.alice.de sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_generic_maps = hash:/etc/postfix/generic smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

    Read the article

  • Ubuntu: Network connection seems to fail after some time

    - by chrischu
    I just bought a Shuttle XS-35 barebone mini-PC and put a 1 TB WD hard drive and 2 Gigs of RAM into it and installed Ubuntu onto it. The machine will post as a media server (streaming videos to my PS3) and as a webserver for some small private projects. Now I wanted to copy my videos from my Windows 7 machine to the Ubuntu machine and therefore created a Samba share on the Ubuntu machine. I tried copying the files with the standard Windows copy function and with SyncToy but after some time (sometimes 5 copied files, sometimes 120 copied files) the Samba share just disappears. When that happens I can't reach the internet from the Ubuntu machine although the network connection still seems to be fine (IP still there etc.). Between the machines lies a LinkSys router. When I try to ping my router (after the connection doesn't work anymore) from the Ubuntu machine only a very small subset of the packages actually get there (something around 20%). When I restart the Ubuntu machine everything seems to work normal again. I have no idea where the problem lies here. Does anybody have a clue? Thanks in advance!

    Read the article

  • Dual boot Windows 8 and Ubuntu 12.10 across a reboot

    - by AK4749
    My Setup: I have two separate SSDs, and each contains an independently bootable OS - W8 and U12.10. From my extremely limited knowledge, this means each has a functioning EFI partition(?). My default boot order (GA-Z68XP-UD3P mobo with UEFI firmware update) boots the UEFI partition containing windows first, but if I enter the BIOS I can select the "ubuntu" entry to successfully boot ubuntu. Both drives are GPT, and are EFI boots. What I want to do: Reboot Windows 8, re-enter W8 (this is happening now due to the default boot order). What I want to change, however, is to boot into Ubuntu if i reboot from ubuntu. Essentially, I would like to work within one OS unless I consciously choose otherwise. Normally, I would not even ask to something I thought was impossible, but... Why I think this is possible: When trying EasyBCD to add ubuntu to the W8 UEFI bootloader, I noticed an "iReboot" addon or something that allows you to select which OS to boot into from within the OS. Note that I ended up not using the NeoGrub entry to chain Ubuntu off the W8 bootloader because I couldn't get much help with it. Is this possible? Have I had too much coffee and gone insane? Thank you all for your time, AK

    Read the article

  • Upgrade of Ubuntu 8.10 distribution fails due to missing packages

    - by Tim
    I have a server that I've forgotten to upgrade for ages, which is still running Intrepid (8.10). I'd like to upgrade it to a newer version of the distribution, so that I can get security patches etc. I found some instructions that tell me to install the package update-manager-core. I tried the following: $ sudo apt-get install update-manager-core but this fails since some of the necessary packages can't be found: ... Err http://archive.ubuntu.com intrepid/main python-apt 0.7.7.1ubuntu4 404 Not Found [IP: 91.189.88.40 80] Err http://archive.ubuntu.com intrepid-updates/main update-manager-core 1:0.93.34 404 Not Found [IP: 91.189.88.40 80] Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/python-apt/python-apt_0.7.7.1ubuntu4_amd64.deb 404 Not Found [IP: 91.189.88.40 80] Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/u/update-manager/update-manager-core_0.93.34_amd64.deb 404 Not Found [IP: 91.189.88.40 80] ... I know that Intrepid is no longer supported, and so I guess some of the necessary files may no longer be maintained. But this seems rather unhelpful: I can't upgrade because it's too old, and the only way to fix this would be to upgrade it. Is there a way round this? Is something else wrong?

    Read the article

  • Ubuntu loading stops ?

    - by joxnas
    I don't know why, or how... but my ubuntu's loading / booting stops right after the ubuntu logo appearing.. An underscore appears in the right top of the screen: _ then, it disappears leaving the whole screen black Version is 9.10 ,Kernel is .20 I have tryed recovering mode and selected recover damaged packages option, but it didn't do any good.. I have very important files in Ubuntu that I need to copy to a pen drive or something, today.. The terminal mode is working, so i think i can do this there.. My questions: How can I get my Ubuntu to load? Is it possible to copy the files i need via terminal mode? I dont know if with other of the previous kernels it would work... but I had configured my grub (inside Ubuntu's gui) to show only the last kernel... and now i can't select any other kernel then .20 because I don't know a way to configure Grub unless via Ubuntu's gui... My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core duo 4Gb DDR2

    Read the article

  • Init Startup of Tomcat

    - by azoor
    Hi I put a init script into /etc/init.d to startup the Apache-tomcat. when i'm reboot the machine. i think the Tomcat try to start and aborted in some level. i am using Ubuntu 9.04. my guessing is the given time to start the tomcat is not enough. if any way have to increase the time to execute a script in startup.

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >