Search Results

Search found 2606 results on 105 pages for 'combination'.

Page 79/105 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • C# using consts in static classes

    - by NickLarsen
    I was plugging away on an open source project this past weekend when I ran into a bit of code that confused me to look up the usage in the C# specification. The code in questions is as follows: internal static class SomeStaticClass { private const int CommonlyUsedValue = 42; internal static string UseCommonlyUsedValue(...) { // some code value = CommonlyUsedValue + ...; return value.ToString(); } } I was caught off guard because this appears to be a non static field being used by a static function which some how compiled just fine in a static class! The specification states (§10.4): A constant-declaration may include a set of attributes (§17), a new modifier (§10.3.4), and a valid combination of the four access modifiers (§10.3.5). The attributes and modifiers apply to all of the members declared by the constant-declaration. Even though constants are considered static members, a constant-declaration neither requires nor allows a static modifier. It is an error for the same modifier to appear multiple times in a constant declaration. So now it makes a little more sense because constants are considered static members, but the rest of the sentence is a bit surprising to me. Why is it that a constant-declaration neither requires nor allows a static modifier? Admittedly I did not know the spec well enough for this to immediately make sense in the first place, but why was the decision made to not force constants to use the static modifier if they are considered constants? Looking at the last sentence in that paragraph, I cannot figure out if it is regarding the previous statement directly and there is some implicit static modifier on constants to begin with, or if it stands on its own as another rule for constants. Can anyone help me clear this up?

    Read the article

  • Heuristic to identify if a series of 4 bytes chunks of data are integers or floats

    - by flint
    What's the best heuristic I can use to identify whether a chunk of X 4-bytes are integers or floats? A human can do this easily, but I wanted to do it programmatically. I realize that since every combination of bits will result in a valid integer and (almost?) all of them will also result in a valid float, there is no way to know for sure. But I still would like to identify the most likely candidate (which will virtually always be correct; or at least, a human can do it). For example, let's take a series of 4-bytes raw data and print them as integers first and then as floats: 1 1.4013e-45 10 1.4013e-44 44 6.16571e-44 5000 7.00649e-42 1024 1.43493e-42 0 0 0 0 -5 -nan 11 1.54143e-44 Obviously they will be integers. Now, another example: 1065353216 1 1084227584 5 1085276160 5.5 1068149391 1.33333 1083179008 4.5 1120403456 100 0 0 -1110651699 -0.1 1195593728 50000 These will obviously be floats. PS: I'm using C++ but you can answer in any language, pseudo code or just in english.

    Read the article

  • Multi-base conversion - using all combinations for URL shortener

    - by Guffa
    I am making an URL shortener, and I am struggling with the optimal way of encoding a number (id) into a character string. I am using the characters 0-9,A-Z,a-z so it will basically be a base-62 encoding. That is pretty basic, but it doesn't make use of all possible codes. The codes that it would produce would be: 0, 1, ... y, z, 10, 11, ... zy, zz, 100, 101, ... Notice that the codes 00 to 0z is not used, the same for 000 to 0zz, and so on. I would like to use all the codes, like this: 0, 1, ... y, z, 00, 01, ... zy, zz, 000, 001, ... It would be some combination of base-62 and base-63, with different bases depending on the position... Using base-62 is easy, for example: create procedure tiny_GetCode @UrlId int as set nocount on declare @Code varchar(10) set @Code = '' while (@UrlId > 0 or len(@Code) = 0) begin set @Code = substring('0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz', @UrlId % 62 + 1, 1) + @Code set @UrlId = @UrlId / 62 end select @Code But I haven't yet managed to make a multi-base conversion out of it, to make use of all the codes.

    Read the article

  • Suppress task switch keys (winkey, alt-tab, alt-esc, ctrl-esc) using low-level keyboard hook

    - by matt
    I'm trying to suppress task switch keys (such as winkey, alt-tab, alt-esc, ctrl-esc, etc.) by using a low-level keyboard hook. I'm using the following LowLevelKeyboardProc callback: IntPtr HookCallback(int nCode, IntPtr wParam, ref KBDLLHOOKSTRUCT lParam) { if (nCode >= 0) { bool suppress = false; // Suppress left and right windows keys. if (lParam.Key == VK_LWIN || lParam.Key == VK_RWIN) suppress = true; // Suppress alt-tab. if (lParam.Key == VK_TAB && HasAltModifier(lParam.Flags)) suppress = true; // Suppress alt-escape. if (lParam.Key == VK_ESCAPE && HasAltModifier(lParam.Flags)) suppress = true; // Suppress ctrl-escape. /* How do I hook CTRL-ESCAPE ? */ // Suppress keys by returning 1. if (suppress) return new IntPtr(1); } return CallNextHookEx(HookID, nCode, wParam, ref lParam); } bool HasAltModifier(int flags) { return (flags & 0x20) == 0x20; } However, I'm at a loss as to how to suppress the CTRL-ESC combination. Any suggestions? Thanks.

    Read the article

  • ORM model and DAO in my particular case

    - by EugeneP
    I have the DB structure as follows: table STUDENT (say, id, surname, etc) table STUDENT_PROPERTIES (say, name_of_the_property:char, value_of_the_property:char, student_id:FK) table COURSE (id, name, statusofcourse_id) table STATUSOFCOURSE (id, name_of_status:char ('active','inactive','suspended' etc)) table STUDENT_COURSE (student_id,course_id,statusofcourse_id) Let's try to pick up domain objects in my database: Student and Course are main entities. Student has a list of courses he attends, also he has a list of properties, that is all for this student. Next, Course entitity. It may contain a list of students that attend it. But in fact, the whole structure looks like this: the starting point is Student, with it's PK we can look a list of his properties, then we look into the STUDENT_COURSE and extract both FK of the Course entity and also the Status of the combination, it would look like "Student named bla bla, with all his properties, attends math and the status of it is "ACTIVE". now, quotation 1) Each DAO instance is responsible for one primary domain object or entity. If a domain object has an independent lifecycle, it should have its own DAO. 2) The DAO is responsible for creations, reads (by primary key), updates, and deletions -- that is, CRUD -- on the domain object. Now, first question is What are entities in my case? Student, Course, Student_Course, Status = all except for StudentProperties? Do I have to create a separate DAO for every object?

    Read the article

  • Firefox Sprite Sheet Image Not Showing Up

    - by ttony21
    I'm trying to create a chat room with emoticons. When a user types an emoticon such as :) in the chatroom, the CSS takes the proper image off the sprite sheet. But my code only seems to work in Opera and IE (odd combination). It doesn't show in Firefox or Chrome (if you manage to hone in exactly where the image should be, you can find the image blank.gif which is used as the stand-in to place the background-url over). Does anyone know what might cause this in Firefox/Chrome? Site: ttony21.byethost24.com Relevant CSS: image.emo { width:19px; height:19px; } image#smile { background:url(img/diceSprite.png) 0 0; } image#bigsmile { background:url(img/diceSprite.png) -19px 0; } etc... Relevant HTML: <img class="emo" id = "smile" src="img/blank.gif" width="1" height="1" alt=":)" title=":)" /> <img class="emo" id = "bigsmile" src="img/blank.gif" width="1" height="1" alt=":D" title=":D" /> etc...

    Read the article

  • codingBat separateThousands using regex (and unit testing how-to)

    - by polygenelubricants
    This question is a combination of regex practice and unit testing practice. Regex part I authored this problem separateThousands for personal practice: Given a number as a string, introduce commas to separate thousands. The number may contain an optional minus sign, and an optional decimal part. There will not be any superfluous leading zeroes. Here's my solution: String separateThousands(String s) { return s.replaceAll( String.format("(?:%s)|(?:%s)", "(?<=\\G\\d{3})(?=\\d)", "(?<=^-?\\d{1,3})(?=(?:\\d{3})+(?!\\d))" ), "," ); } The way it works is that it classifies two types of commas, the first, and the rest. In the above regex, the rest subpattern actually appears before the first. A match will always be zero-length, which will be replaceAll with ",". The rest basically looks behind to see if there was a match followed by 3 digits, and looks ahead to see if there's a digit. It's some sort of a chain reaction mechanism triggered by the previous match. The first basically looks behind for ^ anchor, followed by an optional minus sign, and between 1 to 3 digits. The rest of the string from that point must match triplets of digits, followed by a nondigit (which could either be $ or \.). My question for this part is: Can this regex be simplified? Can it be optimized further? Ordering rest before first is deliberate, since first is only needed once No capturing group Unit testing part As I've mentioned, I'm the author of this problem, so I'm also the one responsible for coming up with testcases for them. Here they are: INPUT, OUTPUT "1000", "1,000" "-12345", "-12,345" "-1234567890.1234567890", "-1,234,567,890.1234567890" "123.456", "123.456" ".666666", ".666666" "0", "0" "123456789", "123,456,789" "1234.5678", "1,234.5678" "-55555.55555", "-55,555.55555" "0.123456789", "0.123456789" "123456.789", "123,456.789" I haven't had much experience with industrial-strength unit testing, so I'm wondering if others can comment whether this is a good coverage, whether I've missed anything important, etc (I can always add more tests if there's a scenario I've missed).

    Read the article

  • Delphi 2010 - Source files randomly become read-only in editor?

    - by Justin
    Does anyone else have this problem or is my Delphi cursed somehow? I'll have a bunch of forms and files open in tabs in the editor and I'll be typing away and then suddenly everything stops - my .pas file has, seemingly at random, become read-only. Sometimes I can just right-click the tab at the top and uncheck "Read-Only" and continue, but sometimes this option is checked and greyed-out (disabled), meaning I can't uncheck it and I can't make any further edits to the file. This too seems to be random. In the latter case, the only solution is to save the file in question, which works, despite Delphi's assertion that the file is read-only, close its tab in the editor, and re-open it. Not catastrophic, really, but it's starting to become annoying. Could it be that I am hitting a keyboard command combination accidentally to do this or is this a bug in Delphi? I'm in Delphi 2010, Windows 7. Doubt it's anything to do with installed packages, but if anyone wants the list I'll generate it and attach it here.

    Read the article

  • Using the MVVM Light Toolkit to make Blendable applications

    - by Dave
    A while ago, I posted a question regarding switching between a Blend-authored GUI and a Visual Studio-authored one. I got it to work okay by adding my Blend project to my VS2008 project and then changing the Startup Application and recompiling. This would result in two applications that had completely different GUIs, yet used the exact same ViewModel and Model code. I was pretty happy with that. Now that I've learned about the Laurent Bugnion's MVVM Light Toolkit, I would really like to leverage his efforts to make this process of supporting multiple GUIs for the same backend code possible. The question is, does the toolkit facilate this, or am I stuck doing it my previous way? I've watched his video from MIX10 and have read some of the articles about it online. However, I've yet to see something that indicates that there is a clean way to allow a user to either dynamically switch GUIs on the fly by loading a different DLL. There are MVVM templates for VS2008 and Blend 3, but am I supposed to create both types of projects for my application and then reference specific files from my VS2008 solution? UPDATE I re-read some information on Laurent's site, and seemed to have forgotten that the whole point of the template was to allow the same solution to be opened in VS2008 and Blend. So anyhow, with this new perspective it looks like the templates are actually intended to use a single GUI, most likely designed entirely in Blend (with the convenience of debugging through VS2008), and then be able to use two different ViewModels -- one for design-time, and one for runtime. So it seems to me like the answer to my question is that I want to use a combination of my previous solution, along with the MVVM Light Toolkit. The former will allow me to make multiple, distinct GUIs around my core code, while the latter will make designing fancy GUIs in Blend easier with the usage of a design-time ViewModel. Can anyone comment on this?

    Read the article

  • PostgreSQL: Rolling back a transaction within a plpgsql function?

    - by jamieb
    Coming from the MS SQL world, I tend to make heavy use of stored procedures. I'm currently writing an application uses a lot of PostgreSQL plpgsql functions. What I'd like to do is rollback all INSERTS/UPDATES contained within a particular function if I get an exception at any point within it. I was originally under the impression that each function is wrapped in it's own transaction and that an exception would automatically rollback everything. However, that doesn't seem to be the case. I'm wondering if I ought to be using savepoints in combination with exception handling instead? But I don't really understand the difference between a transaction and a savepoint to know if this is the best approach. Any advice please? CREATE OR REPLACE FUNCTION do_something( _an_input_var int ) RETURNS bool AS $$ DECLARE _a_variable int; BEGIN INSERT INTO tableA (col1, col2, col3) VALUES (0, 1, 2); INSERT INTO tableB (col1, col2, col3); VALUES (0, 1, 'whoops! not an integer'); -- The exception will cause the function to bomb, but the values -- inserted into "tableA" are not rolled back. RETURN True; END; $$ LANGUAGE plpgsql;

    Read the article

  • Evolutionary Algorithms: Optimal Repopulation Breakdowns

    - by Brian MacKay
    It's really all in the title, but here's a breakdown for anyone who is interested in Evolutionary Algorithms: In an EA, the basic premise is that you randomly generate a certain number of organisms (which are really just sets of parameters), run them against a problem, and then let the top performers survive. You then repopulate with a combination of crossbreeds of the survivors, mutations of the survivors, and also a certain number of new random organisms. Do that several thousand times, and efficient organisms arise. Some people also do things like introduce multiple "islands" of organisms, which are seperate populations that are allowed to crossbreed once in awhile. So, my question is: what are the optimal repopulation percentages? I have been keeping the top 10% performers, and repopulating with 30% crossbreeds and 30% mutations. The remaining 30% is for new organisms. I have also tried out the multiple island theory, and I'm interested in your results on that as well. It is not lost on me that this is exactly the type of problem an EA could solve. Are you aware of anyone trying that? Thanks in advance!

    Read the article

  • jquery Tree Traversal prev() in TD's

    - by Guido Lemmens
    Hello, I'm trying to check/unckeck a selectbox by jquery in a previous TD. I have tried for hours several combination with prev(), parent(), closest(), but still without result... Here is the example code: <table> <tr> <td><input type="checkbox" class="resultcheck"></td> <td><label class="resultchecklabel">Text 1</label></td> </tr> <tr> <td><input type="checkbox" class="resultcheck"></td> <td><label class="resultchecklabel">Text 2</label></td> </tr> </table> <script> $('.resultchecklabel').live('click', function() { if ($(this).prev('td input:checked').val() != null) { $(this).prev('td').prev("input").removeAttr("checked"); } else { $(this).prev('td').prev("input").attr("checked","checked"); } }); </script> Who can help me to solve this question? Many thanks!

    Read the article

  • Exporting static data in a DLL

    - by Gayan
    I have a DLL which contains a class with static members. I use __declspec(dllexport) in order to make use of this class's methods. But when I link it to another project and try to compile it, I get "unresolved external symbol" errors for the static data. e.g. In DLL, Test.h class __declspec(dllexport) Test{ protected: static int d; public: static void m(){} } In DLL, Test.cpp #include "Test.h" int Test::d; In the application which uses Test, I call m(). I also tried using __declspec(dllexport) for each method separately but I still get the same link errors for the static members. If I check the DLL (the .lib) using dumpbin, I could see that the symbols have been exported. For instance, the app gives the following error at link time: 1>Main.obj : error LNK2001: unresolved external symbol "protected: static int CalcEngine::i_MatrixRow" (?i_MatrixRow@CalcEngine@@1HA) But the dumpbin of the .lib contains: Version : 0 Machine : 14C (x86) TimeDateStamp: 4BA3611A Fri Mar 19 17:03:46 2010 SizeOfData : 0000002C DLL name : CalcEngine.dll Symbol name : ?i_MatrixRow@CalcEngine@@1HA (protected: static int CalcEngine::i_MatrixRow) Type : data Name type : name Hint : 31 Name : ?i_MatrixRow@CalcEngine@@1HA I can't figure out how to solve this. What am I doing wrong? How can I get over these errors? P.S. The code was originally developed for Linux and the .so/binary combination works without a problem

    Read the article

  • Using jQuery delay() with separate elements

    - by boomturn
    I want to fake a simple animation on page load by sequentially revealing several pngs, each appearing instantly but with unique, precisely timed delay before the next one. Using the latest version of jQuery (1.4.2 at writing), which provides a delay method. My first (braindead) impulse was: $('#image1').show('fast').delay(800); $('#image2').show('fast').delay(1200); $('#image3').show('fast'); Of course all come up simultaneously. jQuery doc examples refer to a single item being chained, not handling multiple items. OK... try again using nested callbacks from show(): $('#image1').show('fast', function() { $('#image2').show('fast', function() { $('#image3').show('fast', function() { }); }); }); Looks ugly (imagine doing 10, also wonder what processor hit would be) but hey, it works sequentially! Without delay though. So... chain delay() after show() using a callback function from it (not even sure if it supports one): $('#image1').show('fast').delay(800, function() { $('#image2').show('fast').delay(1200, function() { $('#image3').show('fast'); }); }); Hm. Opposite result of what I thought might happen: the callback works, but still no delay. So... should I be using some combination of queue and delay instead of nested callbacks? jQuery doc examples for queue again only use one element for example. Guessing this would involve using a custom queue, but am uncertain how to implement this. Or maybe I'm missing a simple way? (For a simple problem!)

    Read the article

  • Surprising results with .NET multi-theading algorithm

    - by Myles J
    Hi, I've recently wrote a C# console time tabling algorithm that is based on a combination of a genetic algorithm with a few brute force routines thrown in. The initial results were promising but I figured I could improve the performance by splitting the brute force routines up to run in parallel on multi processor architectures. To do this I used the well documented Producer/Consumer model (as documented in this fantastic article http://www.albahari.com/threading/part2.aspx#_ProducerConsumerQWaitHandle). I changed my code to create one thread per logical processor during the brute force routines. The performance gains on my work station were very pleasing. I am running Windows XP on the following hardware: Intel Core 2 Quad CPU 2.33 GHz 3.49 GB RAM Initial tests indicated average performance gains of approx 40% when using 4 threads. The next step was to deploy the new multi-threading version of the algorithm to our higher spec UAT server. Here is the spec of our UAT server: Windows 2003 Server R2 Enterprise x64 8 cpu (Quad-Core) AMD Opteron 2.70 GHz 255 GB RAM After running the first round of tests we were all extremely surprised to find that the algorithm actually runs slower on the high spec W2003 server than on my local XP work station! In fact the tests seem to indicate that it doesn't matter how many threads are generated (tests were ran with the app spawning between 2 to 32 threads). The algorithm always runs significantly slower on the UAT W2003 server? How could this be? Surely the app should run faster on a 8 cpu (Quad-Core) than my 2 Quad work station? Why are we seeing no performance gains with the multi-threading on the W2003 server whilst the XP workstation tests show gains of up to 40%? Any help or pointers would be appreciated. Regards Myles

    Read the article

  • semi dynamic cdn

    - by dwi kristianto
    i'm developing couple of websites using php (directory script, etc.) and wordpress as cms. i need to improve its performance, by using cdn for static files (css, js, images). the problem is, css and javascript files are generated on the fly. i did that due to yahoo and some expert advice to combine the files into one file. also changing basic color of css files. for the time being, i use couple of small vps but still its not fast enough. i already contact maxcdn and the support guy said that they dont have such kind of services. what i need is: a cdn that will serve the request from user/visitor and there's no file in local disk, the cdn will redirect/fetch it from another domain/server. in vps, it could be done easily using combination of .htaccess and php, but NOT in the cdn. most of cdn only support purely static files. is there any such cdn that will server semi-dynamic files?

    Read the article

  • Create Keyword Object Perl Microsoft::AdCenter

    - by toobsco42
    So I looked at the perldoc for the Microsoft::AdCenter module and it shows this as an example of how to create a keyword object: ~$ perldoc Microsoft::AdCenter #Create a Keyword object my $keyword = Microsoft::AdCenter::V7::CampaignManagementService::Keyword->new ->Text("some text") ->BroadMatchBid(Microsoft::AdCenter::V7::CampaignManagementService::Bid->new->Amount(0.1)) ->ExactMatchBid(Microsoft::AdCenter::V7::CampaignManagementService::Bid->new->Amount(0.1)); However, doesn't this violate the new policy of using only one match type per keyword? Campaign Management changes: "Previously, you would create a single Keyword object and specify a bid value for each match that you wanted to bid on (for example, exact match or phrase match). If you did not specify a bid value at the keyword-level, adCenter used the default bid value specified at the ad group level. Now, you must create a Keyword object for each match type that you want to bid on. For example, to bid on the keyword car by using exact match and phrase match, create a Keyword object and set the Text element to car and the ExactMatchBid element to a bid amount. Then, create a second Keyword object and set the Text element to car and PhraseMatchBid to a bid amount. When you add the keywords, you’ll get a unique keyword ID for each keyword and match-type combination."

    Read the article

  • Flush separate Castle ActiveRecord Transaction, and refresh object in another Transaction

    - by eanticev
    I've got all of my ASP.NET requests wrapped in a Session and a Transaction that gets commited only at the very end of the request. At some point during execution of the request, I would like to insert an object and make it visible to other potential threads - i.e. split the insertion into a new transaction, commit that transaction, and move on. The reason is that the request in question hits an API that then chain hits another one of my pages (near-synchronously) to let me know that it processed, and thus double submits a transaction record, because the original request had not yet finished, and thus not committed the transaction record. So I've tried wrapping the insertion code with a new SessionScope, TransactionScope(TransactionMode.New), combination of both, flushing everything manually, etc. However, when I call Refresh on the object I'm still getting the old object state. Here's some code sample for what I'm seeing: Post outsidePost = Post.Find(id); // status of this post is Status.Old using (TransactionScope transaction = new TransactionScope(TransactionMode.New)) { Post p = Post.Find(id); p.Status = Status.New; // new status set here p.Update(); SessionScope.Current.Flush(); transaction.Flush(); transaction.VoteCommit(); } outsidePost.Refresh(); // refresh doesn't get the new status, status is still Status.Old Any suggestions, ideas, and comments are appreciated!

    Read the article

  • Python web scraping involving HTML tags with attributes

    - by rohanbk
    I'm trying to make a web scraper that will parse a web-page of publications and extract the authors. The skeletal structure of the web-page is the following: <html> <body> <div id="container"> <div id="contents"> <table> <tbody> <tr> <td class="author">####I want whatever is located here ###</td> </tr> </tbody> </table> </div> </div> </body> </html> I've been trying to use BeautifulSoup and lxml thus far to accomplish this task, but I'm not sure how to handle the two div tags and td tag because they have attributes. In addition to this, I'm not sure whether I should rely more on BeautifulSoup or lxml or a combination of both. What should I do? At the moment, my code looks like what is below: import re import urllib2,sys import lxml from lxml import etree from lxml.html.soupparser import fromstring from lxml.etree import tostring from lxml.cssselect import CSSSelector from BeautifulSoup import BeautifulSoup, NavigableString address='http://www.example.com/' html = urllib2.urlopen(address).read() soup = BeautifulSoup(html) html=soup.prettify() html=html.replace('&nbsp', '&#160') html=html.replace('&iacute','&#237') root=fromstring(html) I realize that a lot of the import statements may be redundant, but I just copied whatever I currently had in more source file. EDIT: I suppose that I didn't make this quite clear, but I have multiple tags in page that I want to scrape.

    Read the article

  • Portlet container like pluto or jetspeed on google app engine?

    - by Patrick Cornelissen
    I am trying to build something "portlet server"-ish on the google app engine. (as open source) I'd like to use the JSR168/286 standards, but I think that the restrictions of the app engine will make it somewhere between tricky and impossible. Has anyone tried to run jetspeed or an application that uses pluto internally on the google app engine? Based on my current knowledge of portlets and the google app engine I'm anticipating these problems: A war file with portlets is from the deployment standpoint more or less a complete webapp (yes, I know that it doesn't really work without a portal server). The war file may contain it's own web.xml etc. This makes deployment on the app engine rather difficult, because the apps are not visible to each other, so all portlet containing archives need to be included in the war file of the deployed "app engine based portal server". The "portlets" are (at least in liferay) started as permanent servlet processes, based on their portlet.xmls and web.xmls which is located in the same spot for every portlet archive that is loaded. I think this may be problematic in the app engine, because everything is in one big "web app", so it may be tricky to access the portlet.xmls from each archive. This prevents a 100% compatibility in my opinion. Is here anyone who has any experience with the combination of portlets and the app engine? Do you think it's feasible to modify jetspeed, pluto or any other portlet container to be able to run it on the app engine?

    Read the article

  • Should the entity framework + self tracking entities be saving me time

    - by sipwiz
    I've been using the entity framework in combination with the self tracking entity code generation templates for my latest silverlight to WCF application. It's the first time I've used the entity framework in a real project and my hope was that I would save myself a lot of time and effort by being able to automatically update the whole data access layer of my project when my database schema changed. Happily I've found that to be the case, updating my database schema by adding a new table, changing column names, adding new columns etc. etc. can be propagated to my business object classes by using the update from database option on the entity framework model. Where I'm hurting is the CRUD operations within my WCF service in response to actions on my Silverlight client. I use the same self tracking entity framework business objects in my Silverlight app but I find I'm continually having to fight against problems such as foreign key associations not being handled correctly when updating an object or the change tracker getting confused about the state of an object at the Silverlight end and the data access operation within the WCF layer throwing a wobbly. It's got to a point where I have now spent more time dealing with this quirks than I have on my previous project where I used Linq-to-SQL as the starting point for rolling my own business objects. Is it just me being hopeless or is the self tracking entities approach something that should be avoided until it's more mature?

    Read the article

  • complex MySQL Order by not working

    - by Les Reynolds
    Here is the select statement I'm using. The problem happens with the sorting. When it is like below, it only sorts by t2.userdb_user_first_name, doesn't matter if I put that first or second. When I remove that, it sorts just fine by the displayorder field value pair. So I know that part is working, but somehow the combination of the two causes the first_name to override it. What I want is for the records to be sorted by displayorder first, and then first_name within that. SELECT t1.userdb_id FROM default_en_userdbelements as t1 INNER JOIN default_en_userdb AS t2 ON t1.userdb_id = t2.userdb_id WHERE t1.userdbelements_field_name = 'newproject' AND t1.userdbelements_field_value = 'no' AND t2.userdb_user_first_name!='Default' ORDER BY (t1.userdbelements_field_name = 'displayorder' AND t1.userdbelements_field_value), t2.userdb_user_first_name; Edit: here is what I want to accomplish. I want to list the users (that are not new projects) from the userdb table, along with the details about the users that is stored in userdbelements. And I want that to be sorted first by userdbelements.displayorder, then by userdb.first_name. I hope that makes sense? Thanks for the really quick help! Edit: Sorry for disappearing, here is some sample data userdbelements userdbelements_id userdbelements_field_name userdbelements_field_value userdb_id 647 heat 1 648 displayorder 1 - Sponsored 1 645 condofees 1 userdb userdb_id userdb_user_name userdb_emailaddress userdb_user_first_name userdb_user_last_name 10 harbourlights [email protected] Harbourlights 1237 Northshore Blvd, Burlington 11 harbourview [email protected] Harbourview 415 Locust Street, Burlington 12 thebalmoral [email protected] The Balmoral 2075 & 2085 Amherst Heights Drive, Burlington

    Read the article

  • Help securing files access with htaccess and php?

    - by bschaeffer
    I'm working on a site that allows users to purchase digital content and have implemented a method that attempts to serve secure downloads. I'm using CodeIgniter to force downloads like this: $file = file_get_contents($path); force_download("my_file_name.zip", $file); Of course, I make sure the user has access to the file using a database before serving the download, but I was wondering if there was a way to make these files more secure. I'm using a some 8-10 letter keys to create the file paths so urls to the files aren't exactly easy to figure out... something like http://mysite.com/as67Hgr/asdo0980/uth89.zip in lieu of http://mysite.com/downloads/my_file.zip. Also, I'm using .htaccess to deny directory browsing like so: Options All -Indexes. Other than that... I have no idea what steps to take. I've seen articles suggesting username and password methods using .htaccess, but I don't understand how to bypass the password prompt that would occur using that method. I was hoping there might be a method where I could send a username and password combination using headers and cUrl (or something similar), but I wouldn't know where to start. Any help would be hugely appreciated. Thanks in advance!

    Read the article

  • Bison input analyzer - basic question on optional grammer and input interpretation

    - by kumar_m_kiran
    Hi All, I am very new to Flex/Bison, So it is very navie question. Pardon me if so. May look like homework question - but I need to implement project based on below concept. My question is related to two parts, Question 1 In Bison parser, How do I provide rules for optional input. Like, I need to parse the statment Example : -country='USA' -state='INDIANA' -population='100' -ratio='0.5' -comment='Census study for Indiana' Here the ratio token can be optional. Similarly, If I have many tokens optional, then How do I provide the grammer in the parser for the same? My code looks like, %start program program : TK_COUNTRY TK_IDENTIFIER TK_STATE TK_IDENTIFIER TK_POPULATION TK_IDENTIFIER ... where all the tokens are defined in the lexer. Since there are many tokens which are optional, If I use "|" then there will be many different ways of input combination possible. Question 2 There are good chance that the comment might have quotes as part of the input, so I have added a token -tag which user can provide to interpret the same, Example : -country='USA' -state='INDIANA' -population='100' -ratio='0.5' -comment='Census study for Indiana$'s population' -tag=$ Now, I need to reinterpret Indiana$'s as Indiana's since -tag=$. Please provide any input or related material for to understand these topic. Thanks for your input in advance.

    Read the article

  • Generating permutation in Python with specific rule

    - by twfx
    Let say a=[A, B, C, D], each element has a weight w, and is set to 1 if selected, 0 if otherwise. I'd like to generate permutation in the below order 1,1,1,1 1,1,1,0 1,1,0,1 1,1,0,0 1,0,1,1 1,0,1,0 1,0,0,1 1,0,0,0 Let's w=[1,2,3,4] for item A,B,C,D ... and max_weight = 4. For each permutation, if the accum weight has exceeded max_weight, stop calculation for that permutation, move to next permutation. For eg. 1,1,1 --> 6 > 4, exceeded, stop, move to next 1,1,1 --> 6 > 4, exceeded, stop, move to next 1,1,0,1 --> 7 > 4 finished, move to next 1,1,0,0 --> 3 finished, move to next 1,0,1,1 --> 8 > 4, finished, stop, move to next 1,0,1,0 --> 4 finished, move to next 1,0,0,1 --> 5 > 4 finished, move to next 1,0,0,0 --> 1 finished, move to next [1,0,1,0] is the best combination which does not exceeded max_weight 4 My questions are What's the algorithm which generate the required permutation? Or any suggestion I could generate the permutation? As the number of element can be up to 10000, and the calculation stop if the accum weight for the branch exceeds max_weight, it is not necessary to generate all permutation first before the calculation. How can the algo in (1) generate permutation on the fly?

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >