Search Results

Search found 18 results on 1 pages for 'myles j'.

Page 1/1 | 1 

• Cisco Anyconnect Issue on HTC HD2

  - by Myles

  Hello, We've just got a HTC HD2 handset through (UK - T-mobile); and we've installed the Cisco Anyconnect client. It connects ok but then after a few seconds disconnects, then reconnects. It then keeps cycling through in this way, and at no point can we even attempt to sync Exchange! Our ASA 5510 reports; Group User IP <149.254.217.2 SVC Message: 17/ERROR: Reconnecting to recover from error.. And from the phone log; 10:56:03Debug Function: CSocketTransport::getTransportMTU File: ..\IPC\SocketTransport.cpp Line: 1058 Invoked Function: CNetInterface::GetTcpIpMTU Return Code: -32571377 (0xFE0F000F) Description: NETINTERFACE_ERROR_INTERFACE_NOT_AVAILABLE Does anyone have any advice on why it's constantly disconnecting? The phone log does suggest a lack of service; but the phone can browse the net, make calls, etc and appears to have good signal throughout. We did try the Anyconnect software on a Windows 7 PC which worked fine, no drop outs. Any help would be greatly appreciated! Thank you, Myles

  Read the article

• WCF ChannelFactory caching

  - by Myles J

  I've just read this great article on WCF ChannelFactory caching by Wenlong Dong. My question is simply how can you actually prove that the ChannelFactory is in fact being cached between calls? I've followed the rules regarding the ClientBase’s constructors. We are using the following overloaded constructor on our object that inherits from ClientBase: ClientBase(string endpointConfigurationName, EndpointAddress remoteAddress); In the article mentioned above it is stated that: For these constructors, all arguments (including default ones) are in the following list: · InstanceContext callbackInstance · string endpointConfigurationName · EndpointAddress remoteAddress As long as these three arguments are the same when ClientBase is constructed, we can safely assume that the same ChannelFactory can be used. Fortunately, String and EndpointAddress types are immutable, i.e., we can make simple comparison to determine whether two arguments are the same. For InstanceContext, we can use Object reference comparison. The type EndpointTrait is thus used as the key of the MRU cache. To test the ChannelFactory cache theory we are checking the Hashcode in the ClientBase constructor e.g. var testHash = RuntimeHelpers.GetHashCode(base.ChannelFactory); The hash value is different between calls which makes us think that the ChannelFactory isn't actually cached. Any thoughts? Regards Myles

  Read the article

• Surprising results with .NET multi-theading algorithm

  - by Myles J

  Hi, I've recently wrote a C# console time tabling algorithm that is based on a combination of a genetic algorithm with a few brute force routines thrown in. The initial results were promising but I figured I could improve the performance by splitting the brute force routines up to run in parallel on multi processor architectures. To do this I used the well documented Producer/Consumer model (as documented in this fantastic article http://www.albahari.com/threading/part2.aspx#_ProducerConsumerQWaitHandle). I changed my code to create one thread per logical processor during the brute force routines. The performance gains on my work station were very pleasing. I am running Windows XP on the following hardware: Intel Core 2 Quad CPU 2.33 GHz 3.49 GB RAM Initial tests indicated average performance gains of approx 40% when using 4 threads. The next step was to deploy the new multi-threading version of the algorithm to our higher spec UAT server. Here is the spec of our UAT server: Windows 2003 Server R2 Enterprise x64 8 cpu (Quad-Core) AMD Opteron 2.70 GHz 255 GB RAM After running the first round of tests we were all extremely surprised to find that the algorithm actually runs slower on the high spec W2003 server than on my local XP work station! In fact the tests seem to indicate that it doesn't matter how many threads are generated (tests were ran with the app spawning between 2 to 32 threads). The algorithm always runs significantly slower on the UAT W2003 server? How could this be? Surely the app should run faster on a 8 cpu (Quad-Core) than my 2 Quad work station? Why are we seeing no performance gains with the multi-threading on the W2003 server whilst the XP workstation tests show gains of up to 40%? Any help or pointers would be appreciated. Regards Myles

  Read the article

• Quantifying the value of refactoring in commercial terms

  - by Myles McDonnell

  Here is the classic scenario; Dev team build a prototype. Business mgmt like it and put it into production. Dev team now have to continue to deliver new features whilst at the same time pay the technical debt accrued when the code base was a prototype. My question is this (forgive me, it's rather open ended); how can the value of the refactoring work be quantified in commercial terms? As developers we can clearly understand and communicate the value in technical terms, such a the removal of code duplication, the simplification of an object model and so on. But this means little to an executive focussed on the commercial elements. What will mean something to this executive is the dev. team being able to deliver requirements at faster velocity. Just making this statement without any metrics that clearly quantify return on investment (increased velocity in return for resource allocated to refactoring) carries little weight. I'm interested to hear from anyone who has had experience, positive or negative, in relation to the above. ----------------- EDIT ---------------- Thanks for the responses so far, all of which I think are good. What I want to develop is a metric that proves (or disproves!) all of these statements. A report that ties velocity to refactoring and shows a positive effect.

  Read the article

• LSI MegaRAID Expected Chip Temperature?

  - by Myles Gray

  We recently built a replicating SAN array from 2x Dell R720XD's, we are using LSI 9270-8i MegaRAID cards with CacheCade 2.0, BBU and Write Back cache enabled. Our cards are showing HUGE chip temperatures (97*C+ with NO disk activity!). Our R720's are in auto temp management mode so the max exhaust temp is 50*C. The MegaRAID cards are passively cooled and depend on good airflow to cool them - however is 97*C normal? - I have seen reference to 60*C max ambients but nothing for chip temp.

  Read the article

• Can't Remove Logical Drive/Array from HP P400

  - by Myles

  This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

  Read the article

• ESXi boot time with 9 iSCSI targets

  - by Myles Gray

  Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

  Read the article

• Best way to provide redundant switching/links to server

  - by Myles Gray

  We have 3x ESX hosts and 2x SANS that we wish to move to a redundant 10G networking infrastructure. We have 4x Dell PowerConnect 8024F's to provide our backbone and are configured as so (only core switches relevant to this question): So the questions are: 1) Do the interconnects between the 4x 8024F's need to be LAG'd or just STP'd 2) As the NICs on the servers are split across 2 switches, does any special configuration need to be done here or on the switches? 3) If a link or switch fails will the switches automatically find a new path to the Server/SAN?

  Read the article

• Monitor or log directory permission changes?

  - by Myles

  I'm having an issue with a cPanel shared server running CentOS 5 where a few directories under the public_html folder keep getting changed to 777 from 755. The customer says they are not changing it and i'm wondering if there is a way to monitor these specific directories to find out who/what is changing the permissions. I have looked into using auditctl and after testing it and changing the permissions myself I don't see anything in the logs so i'm not sure if i'm doing it right or if it's even possible. Does anybody have any suggestions or ideas on how I could figure out what is changing the permissions? Thanks!!

  Read the article

• IE7 not displaying chinese characters in <select>

  - by Myles

  I have installed fonts for East Asian languages and everything outside of select boxes displays correctly, but I get just get squares inside of select boxes. I've seen from google that other people have experienced this, but there doesn't seem to be a solution that I've found. Anyone out there have one?

  Read the article

• Open a new browser window, or set focus to an existing browser

  - by Craig Myles

  Hi, I'm using code similar to the following: http://blog.flexexamples.com/2007/08/29/launching-new-browser-windows-from-flex/ I have a Flex app running in AIR, and when I click on a URL it opens a new tab in my existing browser. In addition to this the focus doesn't set to the browser. What this means is that I'm not aware of the URL opening in the browser unless I actually change focus from the app to the browser. Is it possible to open a brand new spanking browser, or change focus to the browser so its really obvious to the user? Thanks.

  Read the article

• Flex wordwrap issue with multiple text instances

  - by Craig Myles

  Hi, I have a scenario where I want to dynamically add words of text to a container so that it forms a paragraph of text which is wrapped neatly according to the size of the parent container. Each text element will have differing formatting, and will have differing user interaction options. For example, imagine the text " has just spoken out about ". Each word will be added to the container one at a time, at run time. The username in this case would be bold, and if clicked on will trigger an event. Same with the news article. The rest of the text is just plain text which, when clicked on, would do nothing. Now, I'm using Flex 3 so I don't have access to the fancy new text formatting tools. I've implemented a solution where the words are plotted onto a canvas, but this means that the words are wrapped at a particular y position (an arbitrary value I've chosen). When the container is resized, the words still wrap at that position which leaves lots of space. I thought about adding each text element to an Array Collection and using this as a datasource for a Tile List, but Tile Lists don't support variable column widths (in my limited knowledge) so each word would use the same amount of space which isn't ideal. Does anyone know how I can plot words onto a container so that I can retain formatting, events and word wrapping at paragraph level, even if the container is resized?

  Read the article

• Django + jQuery: Sometimes AJAX, but always DRY?

  - by Justin Myles Holmes

  Let's say I have an app (in Django) for which I want to sometimes (but not always) load content via ajax. An easy example is logging in. When the user logs in, I don't want to refresh the page, just change things around. Yet, if they are already logged in, and then arrive at (or refresh) the same page, I want it to show the same content. So, in the first case, obviously I do some sort of ajax login and load changes to the page accordingly. Easy enough. But what about in the second case? Do I go back through and add {% if user.authenticated %} all over the place? This seems cold, dark, and WET. On the other hand, I can just wrap all the ajaxy stuff in a javascript function, called loggedIn(), and run that if the user is authenticated. But then I'm faced with two http requests instead of one. Also undesirable. So what's the standard solution here?

  Read the article

• NuGet Update Error?

  - by Myles McDonnell

  Using the NuGet package manager dialog at the solution level in the normal course of updating a package reference once the process is complete there is a green tick on the item and the update button disappears. However, with certain of my packages the update process completes, as far as I can tell successfully, but no green tick and the update button remains. Press it again and the next dialog shows that no projects require an update for that package. Am I missing something here or is this a bug?

  Read the article

• NuGet - managing and removing mutil version packages in single solution

  - by Myles McDonnell

  SCENARIO One VS solution with n projects. Project A references package Y v1, Project B references package Y v2. It is now not possible to update all references to package Y for all projects in the solution using the NuGet package manage dialog at the solution level, it is only possible to do this when all projects reference the same version of package Y. Not a big deal for only two projects, but I'm dealing with lots of projects that through poor package management are referencing many package versions when they should all reference the same version. Before I spend the afternoon writing a console app. to auto update all package.config files for a solution so that each referenced package is only referenced via it's latest version (latest referenced, not the very latest, with exceptions/caveats etc)....is there a tool/method for doing this already? Or some other approach I am unaware of?

  Read the article

• Alternative to position: relative; for overflow: auto; bug in IE7.

  - by Myles

  I have content arranged thusly: <div id="thumbnails" style="width: 40px; overflow: auto;"> <div style="float:left; width: 20px;">content</div> <div style="float:left; width: 20px;">content</div> <div style="float:left; width: 20px;">content</div> <div style="float:left; width: 20px;">content</div> <div style="float:left; width: 20px;">content</div> <div style="float:left; width: 20px;">content</div> In IE7 this shows up with the content running out of the scrollable box. The answer everywhere is to make #thumbnails position:relative. My problem is that the items in #thumbnails are scriptaculous draggables that drag outside of thumbnails with a ghost of the element that is positioned absolutely. This does not go over well if the parent is positioned:relatively because now the absolute positions are relative to #thumbnails and not the <body>. Does anyone know an alternative solution to the IE7 bug?

  Read the article

• Who's Talking about Oracle ADF Essentials 11.1.2.3: News & Blogs?

  - by Dana Singleterry

  With the recent release of Oracle ADF Essentials - The core of Oracle ADF which is free, numerous online news sources, developers, Oracle Aces, and Oracle PMs have been furiously blogging / writing articles about this news with excitement.  Here is some of the messaging all in one place for your review. News coverage on Oracle ADF Essentials 11.1.2.3: Computerworld, ITworld and InfoWorld: Oracle releases free ADF Essentials eWEEK: Oracle Launches Free Version of Application Development Framework IT Business Edge: Oracle Starts to Embrace App Servers CMSWire: Oracle Debuts Free Version of its ADF Application Building Tools InfoQ: Oracle Launches Free Version of Application Development Framework Computer Business Review: Oracle unveils Application Development Framework Essentials The Register: Oracle woos open sourcers with free Java web framework Blog entries on Oracle ADF Essentials 11.1.2.3: Oracle ADF Core Functionality Now Available for Free - Presenting Oracle ADF Essentials by JDeveloper PMs Blog ADF Essentials - Available for free and certified on GlassFish! by delabassee JDeveloper 11.1.2.3.0 is out together with Oracle ADF Essentials by Timo Hahn ADF Essentials (A Free Version) Released by Chad Thompson ADF Essentials - Quick Technical Review by Andrejus Baranovskis Develop and Deploy ADF applications free of charge using the new ADF Essentials" by Lucas Jellema Free! ADF Essentials! by Angus Myles Oracle ADF Essentials by Stijn Haus Free Version of Oracle ADF Framework available by Robin Muller-Bady ADF Essentials Release by Eingestellt von Markus Klenke Free version of Oracle ADF - ADF Essentials by Emilio Petrangeli Oracle ADF Essentials - finally free by Jakub Pawlowski Oracle ADF Essentials, a Free Version of ADF by Jake Kuramot

  Read the article

• how to multithread on a python server

  - by user3732790

  HELP please i have this code import socket from threading import * import time HOST = '' # Symbolic name meaning all available interfaces PORT = 8888 # Arbitrary non-privileged port s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) print ('Socket created') s.bind((HOST, PORT)) print ('Socket bind complete') s.listen(10) print ('Socket now listening') def listen(conn): odata = "" end = 'end' while end == 'end': data = conn.recv(1024) if data != odata: odata = data print(data) if data == b'end': end = "" print("conection ended") conn.close() while True: time.sleep(1) conn, addr = s.accept() print ('Connected with ' + addr[0] + ':' + str(addr[1])) Thread.start_new_thread(listen,(conn)) and i would like it so that when ever a person comes onto the server it has its own thread. but i can't get it to work please someone help me. :_( here is the error code: Socket created Socket bind complete Socket now listening Connected with 127.0.0.1:61475 Traceback (most recent call last): File "C:\Users\Myles\Desktop\test recever - Copy.py", line 29, in <module> Thread.start_new_thread(listen,(conn)) AttributeError: type object 'Thread' has no attribute 'start_new_thread' i am on python version 3.4.0 and here is the users code: import socket #for sockets import time s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) print('Socket Created') host = 'localhost' port = 8888 remote_ip = socket.gethostbyname( host ) print('Ip address of ' + host + ' is ' + remote_ip) #Connect to remote server s.connect((remote_ip , port)) print ('Socket Connected to ' + host + ' on ip ' + remote_ip) while True: message = input("> ") #Set the whole string s.send(message.encode('utf-8')) print ('Message send successfully') data = s.recv(1024) print(data) s.close

  Read the article

1