Search Results

Search found 7281 results on 292 pages for 'quality attributes'.

Page 79/292 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • Authenticating AIX Users Against OID (Oracle Internet Directory)

    - by mwilkes
    We have a need to authenticate local users on an AIX server against OID using LDAP. We have a branch within OID where we've placed and synchronized Active Directory users. We've also configured external authentication on OID so that it verifies username/passwords against AD. Has anyone configured authentication for AIX in this type of environment? We believe we need to populate unix specific attributes on the user's directory entry in OID, but are unsure which attributes are needed. Additionally, we are looking to authenticate Oracle database users against OID but because of external authentication we are unable to populate the ORCLPASSWORD attribute on the user's directory entry on OID (which is the attribute Oracle is looking for password in). Help with either or both are welcome.

    Read the article

  • Cannot format SD memory card

    - by cool
    Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

    Read the article

  • Marking multi-level nested forms as "dirty" in Rails

    - by Charles Kihe
    I have a three-level multi-nested form in Rails. The setup is like this: Projects have many Milestones, and Milestones have many Notes. The goal is to have everything editable within the page with JavaScript, where we can add multiple new Milestones to a Project within the page, and add new Notes to new and existing Milestones. Everything works as expected, except that when I add new notes to an existing Milestone (new Milestones work fine when adding notes to them), the new notes won't save unless I edit any of the fields that actually belong to the Milestone to mark the form "dirty"/edited. Is there a way to flag the Milestone so that the new Notes that have been added will save? Edit: sorry, it's hard to paste in all of the code because there's so many parts, but here goes: Models class Project < ActiveRecord::Base has_many :notes, :dependent => :destroy has_many :milestones, :dependent => :destroy accepts_nested_attributes_for :milestones, :allow_destroy => true accepts_nested_attributes_for :notes, :allow_destroy => true, :reject_if => proc { |attributes| attributes['content'].blank? } end class Milestone < ActiveRecord::Base belongs_to :project has_many :notes, :dependent => :destroy accepts_nested_attributes_for :notes, :allow_destroy => true, :allow_destroy => true, :reject_if => proc { |attributes| attributes['content'].blank? } end class Note < ActiveRecord::Base belongs_to :milestone belongs_to :project scope :newest, lambda { |*args| order('created_at DESC').limit(*args.first || 3) } end I'm using an jQuery-based, unobtrusive version of Ryan Bates' combo helper/JS code to get this done. Application Helper def add_fields_for_association(f, association, partial) new_object = f.object.class.reflect_on_association(association).klass.new fields = f.fields_for(association, new_object, :child_index => "new_#{association}") do |builder| render(partial, :f => builder) end end I render the form for the association in a hidden div, and then use the following JavaScript to find it and add it as needed. JavaScript function addFields(link, association, content, func) { var newID = new Date().getTime(); var regexp = new RegExp("new_" + association, "g"); var form = content.replace(regexp, newID); var link = $(link).parent().next().before(form).prev(); if (func) { func.call(); } return link; } I'm guessing the only other relevant piece of code that I can think of would be the create method in the NotesController: def create respond_with(@note = @owner.notes.create(params[:note])) do |format| format.js { render :json => @owner.notes.newest(3).all.to_json } format.html { redirect_to((@milestone ? [@project, @milestone, @note] : [@project, @note]), :notice => 'Note was successfully created.') } end end The @owner ivar is created in the following before filter: def load_milestone @milestone = @project.milestones.find(params[:milestone_id]) if params[:milestone_id] end def determine_owner @owner = load_milestone @owner ||= @project end Thing is, all this seems to work fine, except when I'm adding new notes to existing milestones. The milestone has to be "touched" in order for new notes to save, or else Rails won't pay attention.

    Read the article

  • Show/hide glossary page in YUI

    - by QLiu
    Hello All, I am trying to develop a toggle function like http://www.lutsr.nl/yui/toggle/ But it works a little different as them. When user enters the glossary page, he sees a full list of Alphabet with all the techical terms explaination All — A | B | C | E | G | H | M | P | Q | R | S | T | U | Z | ActiveSync® Microsoft® ActiveSync est l’ application permettant à un pocket pc d’ échanger des informations avec un ordinateur . Le Pocket PC doit utiliser Microsoft Windows Mobile™ ou Windows CE. Bluetooth® Le Bluetooth permet aux informations d’ être transmises entre les appareils électroniques qui ont le Bluetooth. Si vous utilisez le Bluetooth, vous n'avez pas besoin de connecter les périphériques à l'aide de câbles. ............................. If the user clicks B Alphabet, the rest of content will hide, except B. and B will be move to top of the section. If the user clicks All aplphabet, the whole list will be reset. What I have now, it is able to show/hide and listen to click event. Here is my source code: <a href="#A" class ="toggle" rel="A_section,fade,20"> A</a> | <a href="#B" class ="toggle" rel="B_section,fade,20"> B</a> | Script: //Load JavaScript Ready event. this.toggleLinks=YAHOO.util.Dom.getElementsByClassName("toggle"); for(var i=0; i<this.toggleLinks.length; i++) { YAHOO.util.Event.addListener(this.toggleLinks[i], "click", this.animateElements,this); } toggleElements : function(e,controlNode,refEl) { if(controlNode && refEl) { if(YAHOO.util.Dom.hasClass(refEl,"show")) { YAHOO.util.Dom.removeClass(controlNode,"selected"); YAHOO.util.Dom.removeClass(refEl,"show"); } else { YAHOO.util.Dom.addClass(controlNode,"selected"); YAHOO.util.Dom.addClass(refEl,"show"); } } // to disable control node's default behaviour return false; }, animateElements : function(e,obj) { // obj = javascript toggle object // this = link clicked YAHOO.util.Event.preventDefault(e); if(this.rel) { controlNode = this; } if(typeof(controlNode) == "string") { controlNode = YAHOO.util.Dom.get(controlNode); } // objParameters // [0] = object id // [1] = animation type (fade, slide) // [2] = animation duration (seconds) var linkClicked = this; var objParameters = controlNode.rel.split(","); var refEl = YAHOO.util.Dom.get(objParameters[0]); var objStatus = YAHOO.util.Dom.hasClass(refEl,"show"); // if true, object is shown switchClasses = function() { obj.toggleOtherElements(e,linkClicked,refEl); obj.toggleElements(e,linkClicked,refEl); } if(objParameters[1] == "fade") { if(objStatus == true) { var attributes = { opacity: {from: .999, to: 0} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.onComplete.subscribe(switchClasses); objAnim.animate(); } else { YAHOO.util.Dom.setStyle(objParameters[0],"opacity",0); switchClasses(); var attributes = { opacity: {from: 0, to: .999} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.animate(); } } else if (objParameters[1] == "slide") { // not implemented yet } else { // NO ANIMATION - switch classes switchClasses(); } }, toggleOtherElements : function(e,linkClicked,refEl) { // toggle selected state of other elements pointing to the same source for(var i=0; i<this.toggleLinks.length; i++) { var objParameters = this.toggleLinks[i].rel.split(","); var linkClickedParameters = linkClicked.rel.split(","); if(objParameters[0] == linkClickedParameters[0]) { if(YAHOO.util.Dom.hasClass(this.toggleLinks[i],"selected")) { YAHOO.util.Dom.removeClass(this.toggleLinks[i],"selected"); } else { YAHOO.util.Dom.addClass(this.toggleLinks[i],"selected"); } } } }

    Read the article

  • Simple XML variable returns "0"

    - by Warren Haskins
    Ok, so im working with tumblr's API and im using SimpleXMLElement with php and ive run into a problem. Basically, when I call on a variable it just prints a zero. for instance : <?php echo $data->posts->post[0]->photo-url[5]; ?> This just breaks the page, and when I leave out the [5] it just prints zero I want to echo the photo-url with the number [5] but I cant get my head around this and its killing me. I just dont understand why it wont work. Heres a sample of the simpleXMLElement print-out : SimpleXMLElement Object ( [@attributes] = Array ( [version] = 1.0 ) [posts] => SimpleXMLElement Object ( [@attributes] => Array ( [type] => photo ) [post] => Array ( [0] => SimpleXMLElement Object ( [@attributes] => Array ( [id] => 574166180 [url] => http://young-n-reckless.tumblr.com/post/574166180 [url-with-slug] => http://young-n-reckless.tumblr.com/post/574166180 [type] => photo [date-gmt] => 2010-05-05 19:52:46 GMT [date] => Wed, 05 May 2010 15:52:46 [unix-timestamp] => 1273089166 [format] => html [reblog-key] => vc9EfT7d [slug] => [tumblelog] => young-n-reckless [bookmarklet] => true ) [tumblelog] => SimpleXMLElement Object ( [@attributes] => Array ( [title] => Young & Reckless [name] => young-n-reckless [url] => http://young-n-reckless.tumblr.com/ [timezone] => US/Eastern [avatar-url-16] => http://24.media.tumblr.com/avatar_424f776dd55c_16.png [avatar-url-24] => http://24.media.tumblr.com/avatar_424f776dd55c_24.png [avatar-url-30] => http://24.media.tumblr.com/avatar_424f776dd55c_30.png [avatar-url-40] => http://25.media.tumblr.com/avatar_424f776dd55c_40.png [avatar-url-48] => http://24.media.tumblr.com/avatar_424f776dd55c_48.png [avatar-url-64] => http://26.media.tumblr.com/avatar_424f776dd55c_64.png [avatar-url-96] => http://25.media.tumblr.com/avatar_424f776dd55c_96.png [avatar-url-128] => http://24.media.tumblr.com/avatar_424f776dd55c_128.png [avatar-url-512] => http://29.media.tumblr.com/avatar_424f776dd55c_512.png ) ) [photo-link-url] => http://www.flickr.com/photos/katiemabey/3429588812/ [photo-url] => Array ( [0] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [1] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [2] => http://25.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_400.jpg [3] => http://28.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_250.jpg [4] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_100.jpg [5] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_75sq.jpg ) ) Any help would be greatly appreciated, and thanks in advance. Warren

    Read the article

  • Use JAXB unmarshalling in Weblogic Server

    - by Leo
    Especifications: - Server: Weblogic 9.2 fixed by customer. - Webservices defined by wsdl and xsd files fixed by customer; not modifications allowed. Hi, In the project we need to develope a mail system. This must do common work with the webservice. We create a Bean who recieves an auto-generated class from non-root xsd element (not wsdl); this bean do this common work. The mail system recieves a xml with elements defined in xsd file and we need to drop this elements info to wsdlc generated classes. With this objects we can use this common bean. Is not possible to redirect the mail request to the webservice. We've looking for the code to do this with WL9.2 resources but we don't found anything. At the moment we've tried to use JAXB for this unmarshalling: JAXBContext c = JAXBContext.newInstance(new Class[]{WasteDCSType.class}); Unmarshaller u = c.createUnmarshaller(); WasteDCSType w = u.unmarshal(waste, WasteDCSType.class).getValue(); waste variable is an DOM Element object. It isn't the root element 'cause the root isn't included in XSD First we needed to add no-arg constructor in some autogenerated classes. No problem, we solved this and finally we unmarshalled the xml without error Exceptions. But we had problems with the attributes. The unmarshalling didn't set attributes; none of them in any class, not simple attributes, not large or short enumeration attributes. No problem with xml elements of any type. We can't create the unmarshaller from "context string" (the package name) 'cause not ObjectFactory has been create by wsldc. If we set the schema no element descriptions are founded and unmarshall crashes. This is the build content: <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" /> <taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/> <target name="generate-from-wsdl"> <wsdlc srcWsdl="${src.dir}/wsdls/e3s-environmentalMasterData.wsdl" destJwsDir="${src.dir}/webservices" destImplDir="${src.dir}/webservices" packageName="org.arc.eterws.generated" /> <wsdlc srcWsdl="${src.dir}/wsdls/e3s-waste.wsdl" destJwsDir="${src.dir}/webservices" destImplDir="${src.dir}/webservices" packageName="org.arc.eterws.generated" /> </target> <target name="webservices" description=""> <jwsc srcdir="${src.dir}/webservices" destdir="${dest.dir}" classpathref="wspath"> <module contextPath="E3S" name="webservices"> <jws file="org/arc/eterws/impl/IE3SEnvironmentalMasterDataImpl.java" compiledWsdl="${src.dir}/webservices/e3s-environmentalMasterData_wsdl.jar"/> <jws file="org/arc/eterws/impl/Ie3SWasteImpl.java" compiledWsdl="${src.dir}/webservices/e3s-waste_wsdl.jar"/> <descriptor file="${src.dir}/webservices/META-INF/web.xml"/> </module> </jwsc> </target> My questions are: How Weblogic "unmarshall" the xml with the JAX-RPC tech and can we do the same with a xsd element? How can we do this if yes? If not, Exists any not complex solution to this problem? If not, must we use XMLBean tech. or regenerate the XSD with JAXB tech.? What is the best solution? NOTE: There are not one single xsd but a complex xsd structure in fact.

    Read the article

  • Get 5.1 surround sound from computer through a VCR config?

    - by Wedding Nails
    I'm posting to see if my idea of this setup is right and can be done. I currently have the following "equipment": a JVC VCR -quite old-, which has built in surround sound (aka it has several speaker outputs, which I believe is 5.1 and are connected to several speakers that are in every corner of the room), a computer with SPDIF optical output and a new flat screen TV (with built in HDMI). I want the computer to take advantage of the VCR's surround system (all the speakers in the room) in order to play mainly music and video always with all the speakers (5.1) and with the maximum sound quality. Currently, the computer plays sound only through the front speaker (I connect one output to the on board pc audio input) and the quality is really bad. As a side note, the computer video runs with S-video (old school), and the picture quality as you would imagine, is really bad with the new big LCD screen. My main goals are: to upgrade the picture with a new video card which would support HDMI (my tv has HDMI). to buy a SPDIF optical cable, connect one end to the VCR SPDIF input and the other end to the PC output This is theoretically what I've researched so far, and I came out with several questions: in this case, with the SPDIF cable connected, and all the configurations done in windows allowing the 5.1, will I get every content I play "converted" or played through all of my speakers? (I read this forum post). I already know that in order for this setup to play from all the speakers, the content/audio source has to be 5.1. but my question is, if there is a way to play from all of the speakers no matter what type of content I'm playing (that's why I said conversion there) I already know that HDMI cables carry digital sound. Is there a way I can only use said HDMI cord to the tv, and get sound through the VCR? (I'm not too sure about this, I would have to disable the TVs speakers and use the VCR surround as default, but I have no clue wether this can be done or not). Update: The ultimate question is, do I really have to rely on "sound virtualization" technology to get sound from all the speakers, no matter what content I play? (do I require a newer sound card, like a creative soundblaster with said technology?) Thanks!

    Read the article

  • video streaming infrastructure advice

    - by Alchemical
    We would like to set-up a live video-chat web site and are looking for basic recomendations for software and hardware set-up. Most streams will be broadcast live from a single person with a web cam, etc., and viewed by typically 1-10 people, although there could be up to 100+ viewers on the high side. Audio and video do not have to be super-high quality, but do need to be "good enough". The main point is to convey the basic info in the video (and audio). If occasionally the frame-rate drops low and then goes back to normal fairly soon, we could live with that. Budget is an issue, so we are in general looking for a lower cost solution that will give us most of what we need in temers of performance and quality. We are looking at Peer1 for co-lo. The rest of our web site will be .Net / Windows platform. We are open to looking at any platform for the best streaming solution, although our technical expertise is currently more on the Windows side.

    Read the article

  • Tips on Managing Podcast Subscriptions

    - by Ben Griswold
    I listen to a silly number of technical podcasts. I listen to enough of them that it is literally impossible to keep up. I nearly gave up and started dropping feeds from my subscription list when I heard Craig Shoemaker talk about his Polymorphic Podcast fast feed. The idea is he provides the same content at a higher speed so you can listen to his complete show in 3/4th the time. I tried it out with his recent jQuery Secrets with Dave Ward interview and I was shocked with the feed quality. It was a super clear, understandable conversation which only took a fraction of the time commitment. I experimented a bit and played the normal recording at 2x speed on my iPhone and the quality was once again just fine. But now I'm saving half of the time. I'm curious as to how you might manage your podcast subscriptions. Can you offer any tips or advice on how to get the best bang for your buck when it comes to technical podcast listening?

    Read the article

  • Importing video from a videotape recorded on Soy Handycam

    - by Akhil Langer
    I used Windows Movie Maker to import videos from a videotape recorded on Sony handycam. I imported the video in .avi format( as it was giving the best video quality), but the size of the video is very large (8GB for just 1 hour). Moreover, it takes a lot of time to import the video in Windows Movie Maker (approx. 2.5 hrs. for 1 hour video). Please suggest some other software which is more robust in the sense that it can give good quality video in lesser size and also it should be able to import the video quickly(as I have to import many video cassettes).

    Read the article

  • Ghosting context menu clicks in WinXP

    - by Swish
    Let me preface by saying I have a lot of windows open most of the time, although not resource intensive ones, just browsers, ssh sessions, a music player, FTP client, Notepad++, IM clkients, etc. Anyway, I get a lot of weird visual "ghosting" type effects. For example when right-clicking and then selecting an option from a context menu the selected item will remain in view until I right click somewhere on the desktop. Same thing happens when selecting items from the File, Edit, etc. menu in various programs. I'm assuming this is just a result of a less than high quality video card (NVIDIA GeForce FX 5200), all the other hardware in the machine is newer higher quality, that specific video card was added after the fact for multiple monitors. I have looked all over the web for solutions and have increased the number of GDI handles for Windows, reduced the hardware accelaration on the card, etc. Any suggestions other than replace the card?

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Why does text look so Horrible in my HD monitor???

    - by Laura
    I just bought a 1080p 22" Samsung HD monitor (connected via HDMI) and the picture and video quality is great but the text quality is absolutely horrible. Even as I type now all the text in this text box as well as in the browser toolbar and start menu, etc looks weird - like it all has a white outline around it that makes it jagged and hard to read. It hurts my eyes just to look at it. I am running my PC in the suggested native resolution of 1920 by 1080, so what's the problem? Is this one of the unavoidable downsides of using a HD monitor? Is there a solution to the problem?

    Read the article

  • Eager/Lazy loaded member always empty with JPA one-to-many relationship

    - by Kaleb Pederson
    I have two entities, a User and Role with a one-to-many relationship from user to role. Here's what the tables look like: mysql> select * from User; +----+-------+----------+ | id | name | password | +----+-------+----------+ | 1 | admin | admin | +----+-------+----------+ 1 row in set (0.00 sec) mysql> select * from Role; +----+----------------------+---------------+----------------+ | id | description | name | summary | +----+----------------------+---------------+----------------+ | 1 | administrator's role | administrator | Administration | | 2 | editor's role | editor | Editing | +----+----------------------+---------------+----------------+ 2 rows in set (0.00 sec) And here's the join table that was created: mysql> select * from User_Role; +---------+----------+ | User_id | roles_id | +---------+----------+ | 1 | 1 | | 1 | 2 | +---------+----------+ 2 rows in set (0.00 sec) And here's the subset of orm.xml that defines the tables and relationships: <entity class="User" name="User"> <table name="User" /> <attributes> <id name="id"> <generated-value strategy="AUTO" /> </id> <basic name="name"> <column name="name" length="100" unique="true" nullable="false"/> </basic> <basic name="password"> <column length="255" nullable="false" /> </basic> <one-to-many name="roles" fetch="EAGER" target-entity="Role" /> </attributes> </entity> <entity class="Role" name="Role"> <table name="Role" /> <attributes> <id name="id"> <generated-value strategy="AUTO"/> </id> <basic name="name"> <column name="name" length="40" unique="true" nullable="false"/> </basic> <basic name="summary"> <column name="summary" length="100" nullable="false"/> </basic> <basic name="description"> <column name="description" length="255"/> </basic> </attributes> </entity> Yet, despite that, when I retrieve the admin user, I get back an empty collection. I'm using Hibernate as my JPA provider and it shows the following debug SQL: select user0_.id as id8_, user0_.name as name8_, user0_.password as password8_ from User user0_ where user0_.name=? limit ? When the one-to-many mapping is lazy loaded, that's the only query that's made. This correctly retrieves the one admin user. I changed the relationship to use eager loading and then the following query is made in addition to the above: select roles0_.User_id as User1_1_, roles0_.roles_id as roles2_1_, role1_.id as id9_0_, role1_.description as descript2_9_0_, role1_.name as name9_0_, role1_.summary as summary9_0_ from User_Role roles0_ left outer join Role role1_ on roles0_.roles_id=role1_.id where roles0_.User_id=? Which results in the following results: +----------+-----------+--------+----------------------+---------------+----------------+ | User1_1_ | roles2_1_ | id9_0_ | descript2_9_0_ | name9_0_ | summary9_0_ | +----------+-----------+--------+----------------------+---------------+----------------+ | 1 | 1 | 1 | administrator's role | administrator | Administration | | 1 | 2 | 2 | editor's role | editor | Editing | +----------+-----------+--------+----------------------+---------------+----------------+ 2 rows in set (0.00 sec) Hibernate obviously knows about the roles, yet getRoles() still returns an empty collection. Hibernate also recognized the relationship sufficiently to put the data in the first place. What problems can cause these symptoms?

    Read the article

  • Weird unexpected image compression on a web server running Apache on Ubuntu?

    - by Billy Bob Thornton
    I have a weird problem on my production web server running Apache on Ubuntu: it compresses my images thereby dramatically lowering their quality! Actually I have two virtual hosts running, each located in a different folder. Wether I display .gif images by navigating on the two sites, or acceding them directly by their url, their size and quality are invariably degraded. I tried with three different browsers: same problem. Using them on other sites on the Web: no problem. Of course I disabled mod_deflate on the server (which should not compress images anyway), but the phenomenon remains. On my local développement server, running the same configuration, everything is Ok. Now I'm completely lost! For the record, my configuration: Ubuntu 10.04, Apache 2, Php 5.

    Read the article

  • Adding custom attribute to openldap

    - by arukaen
    I am attempting to setup ConTagged - The LDAP Address Book but I am having a few issues with some of the attributes. The problem is that some of them are undefined and they do not seem to be in the inetorgperson.schema. How do I set these custom attributes? For reference, here is the exact error I receive whenever I make a change to a contact. The LDAP server returned the following errors Invalid syntax Undefined attribute type(del anniversary) Undefined attribute type(del marker) Object class violation(mod c) Undefined attribute type(del custom1) Undefined attribute type(del custom2) Undefined attribute type(del custom3) Undefined attribute type(del custom4)

    Read the article

  • add the same qtreewidgetitems into the second column

    - by srinu
    hello i am using the following program to display the qtreewidget. main.cpp include include "qdomsimple.h" include include "qdomsimple.h" int main(int argc, char *argv[]) { QApplication a(argc, argv); QStringList filelist; filelist.push_back("C:\department1.xml"); filelist.push_back("C:\department2.xml"); filelist.push_back("C:\department3.xml"); QDOMSimple w(filelist); w.resize(260,200); w.show(); return a.exec(); } qdomsimple.cpp include "qdomsimple.h" include include QDOMSimple::QDOMSimple(QStringList strlst,QWidget *parent) : QWidget(parent) { k=0; // DOM document QDomDocument doc("title"); QStringList headerlabels; headerlabels.push_back("Chemistry"); headerlabels.push_back("Mechanical"); headerlabels.push_back("IT"); m_tree = new QTreeWidget( this ); m_tree->setColumnCount(3); m_tree->setHeaderLabels(headerlabels); QStringList::iterator it; for(it=strlst.begin();it<strlst.end();it++) { QFile file(*it); if ( file.open( QIODevice::ReadOnly | QIODevice::Text )) { // The tree view to be filled with xml data // (m_tree is a class member variable) // Creating the DOM tree doc.setContent( &file ); file.close(); // Root of the document QDomElement root = doc.documentElement(); // Taking the first child node of the root QDomNode child = root.firstChild(); // Setting the root as the header of the tree //QTreeWidgetItem* header = new QTreeWidgetItem; //header->setText(k,root.nodeName()); //m_tree->setHeaderItem(header); // Parse until the end of document while (!child.isNull()) { //Convert a DOM node to DOM element QDomElement element = child.toElement(); //Parse only if the node is a really an element if (!element.isNull()) { //Parse the element recursively parseElement( element,0); //Go to the next sibling child = child.nextSiblingElement(); } } //m_tree->setGeometry( QApplication::desktop()->availableGeometry() ); //setGeometry( QApplication::desktop()->availableGeometry() ); } k++; } } void QDOMSimple::parseElement( QDomElement& aElement, QTreeWidgetItem *aParentItem ) { // A map of all attributes of an element QDomNamedNodeMap attrMap = aElement.attributes(); // List all attributes QStringList attrList; for ( int i = 0; i < attrMap.count(); i++ ) { // Attribute name //QString attr = attrMap.item( i ).nodeName(); //attr.append( "-" ); /* Attribute value QString attr; attr.append( attrMap.item( i ).nodeValue() );*/ //attrList.append( attr ); attrList.append(attrMap.item( i).nodeValue()); } QTreeWidgetItem* item; // Create a new view item for elements having child nodes if (aParentItem) { item = new QTreeWidgetItem(aParentItem); } // Create a new view item for elements without child nodes else { item = new QTreeWidgetItem( m_tree ); } //Set tag name and the text QString tagNText; tagNText.append( aElement.tagName() ); //tagNText.append( "------" ); //tagNText.append( aElement.text() ); item->setText(0, tagNText ); // Append attributes to the element node of the tree for ( int i = 0; i < attrList.count(); i++ ) { QTreeWidgetItem* attrItem = new QTreeWidgetItem( item ); attrItem->setText(0, attrList[i] ); } // Repeat the process recursively for child elements QDomElement child = aElement.firstChildElement(); while (!child.isNull()) { parseElement( child, item ); child = child.nextSiblingElement(); } } QDOMSimple::~QDOMSimple() { } for this i got the qtreewidget like this +file1 +file2 +file3 but actual wanted output is +file1 +file2 +file3 i don't know how to do it.Thanks in advance

    Read the article

  • Can't access shared drive when connecting over VPN

    - by evolvd
    I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

    Read the article

  • Way to auto resize photos before uploaded to cloud service?

    - by AndroidHustle
    I love using auto syncing services to have my photos taken with my smartphone stored on a cloud storage service. One problem though is that the photos are uploaded in high resolution and takes up a lot of space on the drive. I wonder if any one knows of a service/strategy to have the auto uploaded photo resized to have it occupy less space when auto stored? That is, without me having to take the photos with lesser quality, I still want photos taken with the highest quality since I may take a photo I really like.

    Read the article

  • my sweet old VHS collection

    - by microspino
    Which is the best procedure and digital format to resurrect my old VHS library i a way I can see It on my LCD TV? I have a not so big collection 100 VHS I have plenty of storage I have a network media tank (A110 popcorn Hour but I can also purchase a new media center if needed) I have an old working VCR (but again I can pick a specific one new if you think It's better to save quality) The VHS cassette collection seems to have retained a good quality over the years. Of course I have some computer (either mac and pc) to do the process. Which software do I need/miss? Please give me some advice.

    Read the article

  • How to write a bison grammer for WDI?

    - by Rizo
    I need some help in bison grammar construction. From my another question: I'm trying to make a meta-language for writing markup code (such as xml and html) wich can be directly embedded into C/C++ code. Here is a simple sample written in this language, I call it WDI (Web Development Interface): /* * Simple wdi/html sample source code */ #include <mySite> string name = "myName"; string toCapital(string str); html { head { title { mySiteTitle; } link(rel="stylesheet", href="style.css"); } body(id="default") { // Page content wrapper div(id="wrapper", class="some_class") { h1 { "Hello, " + toCapital(name) + "!"; } // Lists post ul(id="post_list") { for(post in posts) { li { a(href=post.getID()) { post.tilte; } } } } } } } Basically it is a C source with a user-friendly interface for html. As you can see the traditional tag-based style is substituted by C-like, with blocks delimited by curly braces. I need to build an interpreter to translate this code to html and posteriorly insert it into C, so that it can be compiled. The C part stays intact. Inside the wdi source it is not necessary to use prints, every return statement will be used for output (in printf function). The program's output will be clean html code. So, for example a heading 1 tag would be transformed like this: h1 { "Hello, " + toCapital(name) + "!"; } // would become: printf("<h1>Hello, %s!</h1>", toCapital(name)); My main goal is to create an interpreter to translate wdi source to html like this: tag(attributes) {content} = <tag attributes>content</tag> Secondly, html code returned by the interpreter has to be inserted into C code with printfs. Variables and functions that occur inside wdi should also be sorted in order to use them as printf parameters (the case of toCapital(name) in sample source). Here are my flex/bison files: id [a-zA-Z_]([a-zA-Z0-9_])* number [0-9]+ string \".*\" %% {id} { yylval.string = strdup(yytext); return(ID); } {number} { yylval.number = atoi(yytext); return(NUMBER); } {string} { yylval.string = strdup(yytext); return(STRING); } "(" { return(LPAREN); } ")" { return(RPAREN); } "{" { return(LBRACE); } "}" { return(RBRACE); } "=" { return(ASSIGN); } "," { return(COMMA); } ";" { return(SEMICOLON); } \n|\r|\f { /* ignore EOL */ } [ \t]+ { /* ignore whitespace */ } . { /* return(CCODE); Find C source */ } %% %start wdi %token LPAREN RPAREN LBRACE RBRACE ASSIGN COMMA SEMICOLON CCODE QUOTE %union { int number; char *string; } %token <string> ID STRING %token <number> NUMBER %% wdi : /* empty */ | blocks ; blocks : block | blocks block ; block : head SEMICOLON | head body ; head : ID | ID attributes ; attributes : LPAREN RPAREN | LPAREN attribute_list RPAREN ; attribute_list : attribute | attribute COMMA attribute_list ; attribute : key ASSIGN value ; key : ID {$$=$1} ; value : STRING {$$=$1} /*| NUMBER*/ /*| CCODE*/ ; body : LBRACE content RBRACE ; content : /* */ | blocks | STRING SEMICOLON | NUMBER SEMICOLON | CCODE ; %% I am having difficulties on defining a proper grammar for the language, specially in splitting WDI and C code . I just started learning language processing techniques so I need some orientation. Could someone correct my code or give some examples of what is the right way to solve this problem?

    Read the article

  • Scripted printer configuration changes

    - by David Steven
    I've got about a dozen Windows XP machines that I need to make a couple specific printer configuration changes to. The printer is "virtual" printer for an electronic delivery service. I'd like to not have to visit each machine individually. I already have the means to execute commands remotely on the machines, I just can't seem to find away to adjust these settings via command line or script. Specifically I need to be able to make the following changes: 1) As an admin user: - Device Settings - Font Substitution Table/Courier New - Change to "Courier" 2) As a specific* user: - Printer Preferences - Paper/Quality - Advanced - Change Graphic/Print Quality to "600 x 600" - Change Document Options/Printer Features/Graphics Mode to "HP-GL/2" *This change is a per user configuration, unless there's some way to make it once. In this situation I only really need it for a specific (different) user on each machine.

    Read the article

  • Is the Zune HD's audio card better or worse than the iPod touch's?

    - by MatthewThepc
    Firstly, if this is the wrong site to ask this question I apologize, but I didn't see one for "music players" on the stack exchange website :) After reading a few people online say that music playing from a Zune HD sounds better to them than that on an iPod touch, I was wondering whether there's any truth to that? From what I can tell, the Zune HD uses a Wolfson Microelectronics WM8352, while the first-generation iPod Touch (which the Zune HD was competing with) used a Wolfson Microelectronics WM8758BG, and newer models use the Cirrus Logic CS4398 and CS42L61. Which ones are better (to make the question less subjective, let's say in terms of quality, range, & accuracy of output)? Admittedly, I have almost no idea how everything compares and works together, but it would seem to me that, just by looking at the version numbers, the iPod has been better since it's launch. Is there anything else that effects sound quality? Thanks!

    Read the article

  • Importing video from a videotape recorded on Sony Handycam

    - by Akhil Langer
    I used Windows Movie Maker to import videos from a videotape recorded on Sony handycam. I imported the video in .avi format( as it was giving the best video quality), but the size of the video is very large (8GB for just 1 hour). Moreover, it takes a lot of time to import the video in Windows Movie Maker (approx. 2.5 hrs. for 1 hour video). Please suggest some other software which is more robust in the sense that it can give good quality video in lesser size and also it should be able to import the video quickly(as I have to import many video cassettes).

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >