Search Results

Search found 5864 results on 235 pages for 'secure gateway'.

Page 79/235 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86 | Next Page >

SSH connection times out unless I tunnel in from a different server-

- by rm-vanda

OK, so this just started last week - Whenever we try to connect to our server via ssh (we use sftp, as well) - The connection times out. However, when you ssh to any other server and then ssh into the machine - it works flawlessly. Now, the mindblowing thing is that sometimes the ssh connection will succeed. Moments ago, I tried it from another machine, and then my own, and it worked - only to time out the next go around. Last week, simply restarting the ssh daemon worked, but this week, no such luck. I even went in and changed: /etc/hosts.allow ALL : ALL and /etc/hosts.deny is blank. The firewall config hasn't changed - but I even disabled the firewall to see if that would work - It did, for a moment - before cutting off, again. (ufw is set to "ALLOW" not "LIMIT") When I try SSH'ing in from my phone -- it works, fine -- So, it seems the problem is with our ISP/router/gateway - However, I see no log in the router/gateway that says its blocking our connections - And that wouldn't explain why we can SSH into any other server -- except for this one - from our network --- I truly appreciate any insight that anyone may have on this matter -

Read the article
Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

- by Maxim Zaslavsky

I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

Read the article
Virtual box host-only adapter configuration

- by Xoundboy

I have VirtualBox 4 running on Win 7 with a Centos 6 guest VM set up for hosting my dev server. When I'm connected to my home network the guest can be accessed via a static IP address that I configured (192.168.56.2), but not when I'm in the office. I'm guessing that the DHCP server in the office doesn't have a gateway configured for the 192.168.56.x IP range. I read something about the VB host-only adapter that should allow me to set this guest VM up in such a way that I don't need to be on any network to be able to access the guest from the host using a static IP. I've not been able to find out exactly how to configure this though. Can anyone give me an example configuration, thanks. UPDATE: Thanks for your responses. I've now set up a single virtual network adapter in VirtualBox and set it to host-only: C:\Users\Ben>vboxmanage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: d419ef62-3c46-4525-ad2d-be506c90459a Dhcp: Disabled IPAddress: 192.168.56.2 NetworkMask: 255.255.255.0 IPV6Address: fe80:0000:0000:0000:78e3:b200:5af3:2a57 IPV6NetworkMaskPrefixLength: 64 HardwareAddress: 08:00:27:00:94:e8 MediumType: Ethernet Status: Up VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter On the guest I've set up eth0 to use the same IP address as the host-only adapter (192.168.56.2) but when I try to log in using Putty I still get "Network Error : connection refused". VirtualBox DHCP servier is enabled but I can't ping the gateway (192.168.56.1) from either host nor guest. There's no firewall running on either OS. What next?

Read the article
Troubleshooting my internet connection

- by Simon Verbeke

While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

Read the article
Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

- by Maxim Z.

I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

Read the article
connecting to a network using route command

- by ami

I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to connect to these servers from other machines I used the following command "route ADD 10.1.1.0 MASK 255.255.255.0 192.168.223.220" and than I was able to connect to the servers using there 10.1.1.xx address. The problem is that the hard disk of main server(192.168.223.220) died and was replaced and after the that I am not able to connect to the servers as before, the route command succeeds and I can ping 10.1.1.20 but not the other servers. Thanks I am using Windows XP and the print outs are D:\AurosHome\Scriptsipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : N100-master Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 Physical Address. . . . . . . . . : 00-30-48-34-BA-B9 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.225.180 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.225.254 DNS Servers . . . . . . . . . . . : 192.168.225.2 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration Physical Address. . . . . . . . . : 00-30-48-34-BA-B8 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.1.1.20 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Mellanox IPoIB Adapter Physical Address. . . . . . . . . : 00-02-C9-25-34-0D D:\AurosHome\Scriptsroute print Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 30 48 34 ba b9 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 - Packet Sche duler Miniport 0x3 ...00 30 48 34 ba b8 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Packet Schedul er Miniport 0x10005 ...00 02 c9 25 34 0d ...... Mellanox IPoIB Adapter - Packet Scheduler Miniport =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.225.254 192.168.225.180 10 10.1.1.0 255.255.255.0 10.1.1.20 10.1.1.20 10 10.1.1.20 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.225.0 255.255.255.0 192.168.225.180 192.168.225.180 10 192.168.225.180 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.225.255 255.255.255.255 192.168.225.180 192.168.225.180 10 224.0.0.0 240.0.0.0 10.1.1.20 10.1.1.20 10 224.0.0.0 240.0.0.0 192.168.225.180 192.168.225.180 10 255.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 1 255.255.255.255 255.255.255.255 10.1.1.20 10005 1 255.255.255.255 255.255.255.255 192.168.225.180 192.168.225.180 1 Default Gateway: 192.168.225.254 Persistent Routes: None

Read the article
OpenVPN - Cannot browse ipv4 websites

- by user1494428

I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is I can only browse websites which support ipv6 like google. http://whatismyv6.com/ reports me that I've an ipv6 adress, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

Read the article
Problem with connecting two different networks

- by tanascius

I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

Read the article
Cannot browse ipv4 websites (OpenVPN )

- by user1494428

I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

Read the article
Network card shuts down when stressed

- by user142485

I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

Read the article
iptables (DNAT)

- by user1126425

I have a host that acts as a gateway for other hosts. The configuration is such that eth0(192.168.1.3) is connected to internet via a router and eth1(172.16.2.50) is connected to internal network via switch. Given that, this host is also running a service that is bound to eth1 and serves the internal network. I want to extend this service to the outside world as well and was trying to manipulate iptables so that any request that comes to this host via eth0 and is directed to 192.168.1.3:80 is send to 172.16.2.50 and internet users can also make use of the service. Here are my iptable rules for setting up the host as gateway (and these work fine): sudo iptables -t nat -A POSTROUTING -s 172.16.2.0/16 -o eth0 -j MASQUERADE sudo iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth1 -j MASQUERADE sudo iptables -A FORWARD -s 172.16.2.0/16 -o eth0 -j ACCEPT sudo iptables -A FORWARD -d 172.16.2.0/16 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT And these are the rules that I am trying to add to the iptables to achieve my ends: sudo iptables -A INPUT -d 192.168.1.3 -p tcp -dport 80 -i eth0 -j ACCEPT sudo iptables -t nat -A PREROUTING -d 192.168.1.3 -p tcp -dport 80 -j DNAT --to-destination 172.16.2.50:80 sudo iptables -t nat -A PREROUTING -s 172.16.2.50 -p tcp -sport 80 -j SNAT --to-source 192.168.1.3:80 sudo iptables -A FORWARD -d 192.168.1.3 -p tcp -dport 80 -m state --state ESTABLISHED,RELATED -j ACCEPT When I do so, I get error like : "multiple -d flags not allowed" ... Can someone tell me how to resolve this error... and do the entries that I want to add will serve my purpose ? Thanks!

Read the article
Duplicate forwarded messages in Blackberry when using BIS

- by Avery Payne

Our Setup External email arrives at a Postfix server, is scanned, and then forwarded via settings in transport (using the RELAY:[{ip-address}] for a given address) to an Exchange 2007 server. Some users are on Exchange, but a few are still on the Postfix server (they will be moved in the near future). IMAPS is provided for external connections via Dovecot; in-house, IMAP is provided for the Gateway and native MAPI is used for Exchange/Outlook. Blackberries are connected via BIS, which uses Dovecot as a reverse-proxy IMAPS service to connect to Exchange (when the mailbox exists on Exchange, otherwise it connects to the mailbox on the gateway). The Issue We have a user that, when they forward an email on their Outlook client, they get a duplicate of the original message on their Blackberry. When I say duplicate, I mean that they have a copy of the forwarded version of the message (i.e. their version of the message that they obtained hitting the forward button), and a copy of the original message that shows up at the same time. The expected behavior is to just see the forwarded message, not the forwarded message and a 2nd copy of the original message. We've only seen this with Outlook users that also have a Blackberry. Other IMAP clients, such as OS X Mail or Thunderbird, do not exhibit this behavior when connecting to the Exchange server; forwarded messages work as expected. The Questions what is causing this to happen? why does it only affect Outlook/Blackberry setups, and not TBird/Blackberry or OSX-Mail/Blackberry? how do we get it to stop, before people go insane and never forward messages again?

Read the article
Can't Ping - Wireless network of home

- by Naunidh

Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

Read the article
Suggestions for transitioning to new GW/private network

- by Quinten

I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

Read the article
I have just created a subnet for a local network, connecting to a standalone server on another network, now I cannot connect to the internet

- by Seth

I am just learning some new aspects of servers and networking. We have a network of 5 subnets that all interconnect with each-other. In order to get two computers on the subnet that we were setting up, I changed the IP from the subnet where the standalone server is on (where they used to be set up)to the local subnet we are remotely hooking up. Likewise I also changed the gateway to coincide with the new subnet. Only problem is that since doing this, I am unable to establish a connection to the internet. I can ping the server and correspong gateway & DNS server, but cannot get connected to the internet. We do have a dumb-switch (non-programmable) connected that receives both the internet and private network inputs and distributes (or should do so) to about 5 other computers. Bottom line, I cannot currently connect to the internet, and am wondering what could be causing this.. It is likely something very obvious and pardon me being more vague than I probably should be, but I could use some help resolving this! Thanks for any help!

Read the article
Configuring two subnets with two NICS. Access from a NAS to the internet

- by archipestre

I am having trouble configuring my NAS. I have a DSL router with WIFI (192.168.1.1) in my flatmates room. In my room I have a server with two NICS: 1) wlan0 (192.168.1.2) that connects to the DSL router via wireless 2) em1 (192.168.0.1) that connects to the NAS (192.168.0.20) with a crossover cable. I have Fedora 17 and I have enable packet forwarding. My IP configuration is as follows: WLAN0 inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 EM1 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 My routing table looks like: Destination Gateway G enmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 em1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 I have enable a static route in the DSL server: Status Network Destination Subnet Mask Interface Gateway Remove Edit Active 192.168.0.0 255.255.255.0 LAN 192.168.1.2 From my server I can ping the DSL router and the NAS. From the NAS I can ping both NICS of the server. However the NAS is unable to ping the DSL router or any address in the Internet. Any idea of what is wrong. Thank you in advance

Read the article
Slow network interaction between 2 kvm host machines

- by VirtualNoob

We have 2 physical machines, Host1 is a CentOS 6.4 kvm host and hosts ~7 kvm VMs all running Ubuntu 12.04 - all of this runs perfectly. Recently we've added a 2nd host system, host2, again a CentOS 6.4 kvm host with a view to running another couple of VMs and providing some failover against host1 should it be required. Both physical machines reside in the same cabinet in our DC, and are on the same subnet - let's say host1: 1.1.1.64 and host2: 1.1.1.81. Both have their gateway set to the DC gateway of 1.1.1.254 with no hardware firewall in between. On each machine, I have 4 NICs that are bonded together to form a single interface, which is then bridged to allow the VMs to access the network. All of the VMs are online, and all of them can successfully ssh into the hosts without any delay. Both systems can access the internet fine, and I can ssh into both systems from home without any issues. However, there is a real delay when attempting to ssh from host1 to host2 (or vice versa) and this obviously means that any action required on host2, that is controlled by host1 either takes forever or results in failure due to timeout. In the interest of keeping this post short, I've put my ifcfg files into a pastie: http://pastie.org/8081648 I've tried both adding a firewall rule in each machine for the other, and also disabling the firewall entirely, so that can't be the issue. I've tried troubleshooting this myself but can't seem to get to the bottom of it. Any help or advice would be appreciated. Thanks in advance.

Read the article
(PHP) SHA1 vs md5 vs SHA256: which to use for a PHP login?

- by hatorade

I'm making a php login, and I'm trying to decide whether to use SHA1 or Md5, or SHA256 which I read about in another stackoverflow article. Are any of them more secure than others? For SHA1/256, do I still use a salt? Also, is this a secure way to store the password as a hash in mysql? function createSalt() { $string = md5(uniqid(rand(), true)); return substr($string, 0, 3); } $salt = createSalt(); $hash = sha1($salt . $hash);

Read the article
AuthSub target path prefix does not match the provided "next" URL

- by dweebsonduty

I am trying to use the Gcal API in PHP. I am using the ZEND framework function getAuthSubUrl($company) { $next = "http://$company.mysite.com"; $scope = 'http://www.google.com/calendar/feeds/'; $secure = false; $session = true; return (Zend_Gdata_AuthSub::getAuthSubTokenUri($next, $scope, $secure, $session)); } $authSubUrl = getAuthSubUrl(); echo "<a href=\"$authSubUrl\">login to your Google account"</a> I am not sure what I am doing wrong here. I am following the google example almost exactly. They do have $next = getCurrentUrl(); in their expample but I am getting undefined errors when I try that.

Read the article
SQL 2008 R2 login/network issue

- by martinjd

I have a Windows Server 2008 R2 new clean install , not a VM, that I have added to a Windows Server 2003 based domain using my account which has domain admin rights. The domain functional level is 2003. I performed a clean install of SQL Server 2008 R2 using my account which has domain admin rights. The installation completed without any errors. I logged into SSMS locally and attempted to add another domain account by clicking Search, Advanced and finding the user in the domain. When I return to the "Dialog - New" window and click OK I receive the following error: Create failed for Login 'Domain\User'. (Microsoft.SqlServer.Smo) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Windows NT user or group 'Domain\User' not found. Check the name again. (Microsoft SQL Server, Error: 15401) I have verified that the firewall is off, tried adding a different domain user, tried using SA to add a user, installed the hotfix for KB 976494 and verified that the Local Security Policy for Domain Member: Digitally encrypt or sign secure channel Domain Member: Digitally encrypt secure channel Domain Member: Digitally sign secure channel are disabled none of which have made a difference. I can RDP to a Server 2003 server running SQL 2008 and add the same domain user without issue. Also if I try to connect with SSMS to the sql server from another system on the domain using my account I get the following error: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (Microsoft SQL Server, Error: 18452) and on the database server I see the following in the security event log: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: myUserName Account Domain: MYDOMAIN Failure Information: Failure Reason: An Error occured during Logon. Status: 0xc000018d Sub Status: 0x0 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: MYWKS Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I am sure that the "NULL SID" has some significant meaning but have no idea at this point what the issue could be.

Read the article
Sha or Md5 algorithm i need to encrypt and decrypt in flex

- by praveen

Hi I am developing my application in flex and JSP, so when I am passing values through HTTP Service Post method with request object but these values are tracing and modifying by testing team so I am planning to encrypt values in flex and decrypt it in jsp.so is there any algorithms like SHA or MD5 more secure algorithms, so please send any code or related links it is very useful to me. I am using like httpService = new HTTPService; httpService.request = new Object; httpService.request.task = "doInvite"; httpService.request.email = emailInput.text; httpService.request.firstName = firstNameInput.text; httpService.request.lastName = lastNameInput.text; httpService.send(); So is there any other way to give more secure ,please help me in this,Thanks in Advance.

Read the article
Server Security

- by mahatmanich

I want to run my own root server (directly accessible from the web without a hardware firewall) with debian lenny, apache2, php5, mysql, postfix MTA, sftp (based on ssh) and maybe dns server. What measures/software would you recomend, and why, to secure this server down and minimalize the attack vector? Webapplications aside ... This is what I have so far: iptables (for gen. packet filtering) fail2ban (brute force attack defense) ssh (chang default, port disable root access) modsecurity - is really clumsy and a pain (any alternative here?) ?Sudo why should I use it? what is the advantage to normal user handling thinking about greensql for mysql www.greensql.net is tripwire worth looking at? snort? What am I missing? What is hot and what is not? Best practices? I like "KISS" - Keep it simple secure, I know it would be nice! Thanks in advance ...

Read the article
Spring Security - is Role and ACL security overkill?

- by HDave

I have a 3 tier application that requires security authorizations be placed on various domain objects. Whether I use Spring's ACL implementation or roll my own, it seems to me that ACL based security can only be used to authorize (service) methods and cannot be used to authorize URL or web service invocations. I think this because how could a web service call check the ACL before it has hydrated the XML payload? Also, all the examples for web access security in the Spring documentation are securing URL's based on Role. Is it typical to use Spring's roles to secure web presentation and web service calls, while at the same time using ACL's to secure the business methods? Is this overkill?

Read the article
SSH connection times out

- by mark

Given: vm - a WinXPsp3 virtual machine hosted by a Win7sp1 physical machine alice is the user on vm srv - a Win2008R2sp1 server bob is the user on srv quake - a linux server mark is the user on quake Both vm and srv have the same new installation of cygwin (1.7.9) and openssh. Firewall service is disabled on vm (and its host) and on srv All the machines can be pinged from all the machines. ssh mark@quake works OK from both vm and srv. ssh bob@srv works OK from both quake and vm. ssh alice@vm works on the vm itself only, but it fails on the other two machines: alice@vm ~ $ ssh alice@vm alice@vm's password: Last login: Tue Oct 25 23:42:09 2011 from vm.shunra.net [mark@Quake ~]$ ssh -vvv alice@vm OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out bob@Srv ~ $ ssh -vvv alice@vm OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out I used ssh-host-config both on vm and srv to configure the ssh to run as a windows service. Besides that I did nothing else. Can anyone help me troubleshoot this issue? Thank you very much. EDIT The virtual machine software is VMWare Workstation 7.1.4. I think the problem is in its settings, but I have no idea where exactly. The Network Adapter is set to Bridged. EDIT2 All the machines are located in the company lab, I think all of them are on the same segment, but I may be wrong. Below is the ipconfig /all output for each machine (skipping the linux server). I have deleted the Tunnel adapters to keep the output minimal. If anyone thinks they matter, do tell so and I will post them as well. In addition ping output is given to show that DNS is correct. Something else, may be relevant, may be not. Doing psexec to srv works OK, whereas to vm failes with Access Denied. srv: C:\Windows\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : srv Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) Physical Address. . . . . . . . . : E4-1F-13-6D-F3-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 172.30.6.9(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Windows\system32>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time=1ms TTL=128 Reply from 172.30.2.60: bytes=32 time=4ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 4ms, Average = 1ms C:\Windows\system32> vm: C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net shunranet Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : shunranet Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical Address. . . . . . . . . : 00-0C-29-8F-A0-0B Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 172.30.2.60 Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCP Server . . . . . . . . . . . : 172.30.1.1 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 Lease Obtained. . . . . . . . . . : Tuesday, October 25, 2011 18:16:34 Lease Expires . . . . . . . . . . : Wednesday, November 02, 2011 18:16:34 C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time=1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\> vm-host (the host machine of the vm): C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm-host Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) Physical Address. . . . . . . . . : 6C-F0-49-E7-E9-30 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f59d:7f6e:1510:6f%10(Preferred) IPv4 Address. . . . . . . . . . . : 172.30.6.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCPv6 IAID . . . . . . . . . . . : 242020425 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : 172.30.1.1 194.90.1.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd92:38c0:9a6d:c008%16(Preferred) Autoconfiguration IPv4 Address. . : 169.254.192.8(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352342102 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::edb9:b78c:a504:593b%17(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.5.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 369119318 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\> EDIT3 I have just checked - the vm-host is able to ssh to the vm machine! I still do not know how to leverage this discovery to solve the problem.

Read the article
Good Guide For Web App Security?

- by QAH

Hello! I am pretty good on making web applications and I know how to transfer data to and from client/server, etc. I need some help though learning how to make the data exchanges more secure. That is the reason why I feel kind of scared to publish any web app I make. I wanted to know what are some good guides to help you understand and learn how to secure data transfer with your web application? Things like better authentication for example and making better logins. You can post any suggestion, but just for your information, I mainly code my web apps with Javascript and PHP. Also, I transfer my data using JSON or XML. Thanks a lot

Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86 | Next Page >