Search Results

Search found 5509 results on 221 pages for 'sound effects'.

Page 79/221 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Microphones not working on Apple macbook Air 1,1 (Early 2008) under Linux

  - by jj_p

  I'm running Linux on an mba. I can't make the microphones (neither external nor internal) work. I test using alsamixer and arecord -d 5 test-mic.waw together with aplay test-mic.waw It seems there is a problem with kernel trying to decipher Apple (intentionally) corrupted 'bios', in particular the mic pins are wrongly assigned. As far as we are concerned here, is there any difference between using EFI and BIOS-compatibility mode? (see https://wiki.archlinux.org/index.php/MacBook where they claim to have everything working out of the box on mba1,1) A nice proposal would be to compile the latest Linux kernel and run hda-jack-retask to find the right configuration (in the case of Realtek codec, the missing things I'm supposed to check are either some vendor-specific COEF verbs, EAPD or GPIO setup.), and then come up with a kernel patch to address the issue. Since I'm not that familiar with this last part of the story, can anyone help me through this process? Some useful data: The output from alsa script run as root http://www.alsa-project.org/db/?f=adae8ebee1007043fe83414ac4972319e02255fa The command hda-jack-sense-test -a (with external mic in) Pin 0x14 (Internal Speaker): present = No Pin 0x15 (Green HP Out): present = Yes Pin 0x16 (Not connected): present = No Pin 0x17 (Not connected): present = No Pin 0x18 (Not connected): present = No Pin 0x19 (Not connected): present = No Pin 0x1a (Not connected): present = No Pin 0x1b (Not connected): present = No Pin 0x1c (Not connected): present = No Pin 0x1d (Not connected): present = No Pin 0x1e (Not connected): present = No Pin 0x1f (Not connected): present = No Most likely the chip is Realtek ALC885 (compare also ALC889A) http://guide-images.ifixit.net/igi/bBTSqaeK5JpQ1AWe.large , although at the moment alsa reads it as ALC889A Takashi Iwai's tutorial https://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio.txt Some people researched the original files from a running OS X installation on this same model (I think the relevant files are AppleHDA.kext/Contents/MacOS/AppleHDA AppleHDA.kext/Contents/PlugIns/AppleHDAHardwareConfigDriver.kext/Contents/Info.p????list AppleHDA.kext/Contents/Resources/layout12.xml.zlib AppleHDA.kext/Contents/Resources/Platforms.xml.zlib) http://www.insanelymac.com/forum/topic/220090-alc889a-pin-configuration/#entry1554954 Datasheet http://www.realtek.info/pdf/ALC885_1-1.pdf (from the same Realtek, one can also try to download Linux driver, but this is just taken from ALSA project, as stated in the readme file.) Compare with this Arch guy http://www.alsa-project.org/db/?f=3ca8243c0626844f0264a3faad0aa72018bc14f4 Here for the first time support to audio (except mics) for mba1,2 (which is morally the same as 1,1) is patched into the kernel http://www.alsa-project.org/pipermail/alsa-devel/2010-February/025511.html The same jack supposedly works both for HP and ext MIC, I think it's called TRRS, and it's the same as the one used e.g. for iphones This guy might have done a similar job, though to a more recent version and for sound globally, not just mics: http://blogs.aerys.in/jeanmarc-leroux/2013/09/15/fixing-2013-macbook-air-ubuntu-sound-issue/ (this is mirror to http://unix.stackexchange.com/questions/73044/microphones-not-working-on-apple-macbook-air-1-1-early-2008-under-linux )

  Read the article

• 802.11n Audio Interference

  - by colithium

  Symptoms My audio is riddled with pops/crackles/glitches. Sometimes I swear the glitches sound exactly like the facebook messenger sound (best comparison I can give). Cause Using DPC Latency Checker, it reports the latency to be an abysmal 17,500µs (0.0175s). The first thing I did was disable my 802.11n wireless adapter. This immediately dropped the latency to a nice 250µs. When I re-enabled the adapter, it jumped right back up. I'm 99% certain that this is the cause of my audio glitches. Solution What can I do about it besides using wired Ethernet or buying a whole new adapter? My adapter is a Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. To be honest, I've had nothing but trouble with the 802.11n standard and am contemplating just going back to g.

  Read the article

• What percentage of computers today are *nix based?

  - by Lazer

  Do you know some source that has statistics/estimations about this? Any sound guesses?

  Read the article

• GeForce 8800GT not even giving basic output

  - by Sam

  My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

  Read the article

• How to fix choppy video with VLC player?

  - by Brian Ojeda

  When playing most movies in VLC player, the video feed is choppy. Furthermore, the sound is near perfect. Another catch is, this video issue wasn't always an issue. I use to play movies with no problem with video or sound. I can not pin point what has changed between the it use to work fine and the time it started being choppy though. I have an ASUS G73JW-A1. This system should be more than enough to handle the demand of playing HD videos. Movies that are normally effected are HD videos. These video range from 4 to 9 gigs. In addition, the videos are in MKV, MP4 (or M4V), and AVCHD (or M2TS) formats. I get the same results when playing move directly off my hard drive or off an external. Finally, all the drivers have been recently checked and updated if needed.

  Read the article

• Music but no voices on headphones

  - by TheEmeritus

  I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

  Read the article

• Windows 7 does not recognize hdmi audio output

  - by user30038

  I recently upgraded to Windows 7 on a Dell 545 MT with audio/video output via nVidia 9800 GTX+ to a flat screen television. I have installed/uninstalled/reinstalled all the most recent drivers from nVidia & realtek, but the machine will not recognize the hdmi output as a sound device (as it did previously in Vista). I troubleshot the problem with Dell for over an hour and was then directed to their software specialists who want $130 to fix the issue! Can anyone offer some insights on this? I've searched nVidia and Windows 7 forums w/o success and would really like to get sound coming back through my tv speakers. Many Thanks.

  Read the article

• WinXP keyboard input repeat rate problem

  - by Victor Sorokin

  I have problem similar to http://superuser.com/questions/33981/problems-with-kvm-switch-and-keyboard-repeat-rate-on-windows-xp: When I press and hold some key it's repeated random number of times, after that repeat stops and I need to release key and press it again to make repeat continue. If there's simultaneous sound playback and repeat is stopped, sound's stuck while I hold key with unpleasant drumming as if there's some audio problem. This issue is reproducible in WinXP Safe Mode. On the same config under Linux there's no issue. My config: List item PS/2 Logitech Keyboard USB Mouse MB M3A/H-HDMI WinXP Pro English SP2 with added Russian layout (WinXP loads via GRUB2) Realtek audio drivers for AC97 Thanks for your suggestions J

  Read the article

• snow leopard: how can i monitor loading of specific extensions?

  - by ufk

  Hiya. I'm installing VoodooHDA extension in order for Intel 82801I (ICH9 Family) HD Audio 8086:293E sound card to operate. The sound card does not work but i have no idea how to debug the issue. How can I check if the module was loaded properly? how can i make sure that there where no conflicts? how can i make sure that there were no dependencies issues with another module? Using snow leopard 64 bit. thanks!

  Read the article

• CPU fan twitching phase leds blinking - computer won't boot

  - by SooX

  I have a big problem that I got today. Yesterday computer was "on" normally, I went to sleep without shutting it down. When I woke up, I heard a strange sound and was unable to bring it up from hibernate. I unplugged the PSU. When I plugged the PSU back in, the sound came back. When I opened the case, I saw the fan "twitching" like it is about to start and fan LEDs were blinking. Also, motherboard LEDs were blinking in the same pattern - the first green one has more of luminosity then others. When I cut down the power with 0/1 button on PSU, the fans continue to make sounds like the machine is trying to boot before the capacitors run out and the power dies. Does anyone have a clue what to do? I tried disassembling everything but that doesn't work. I will try with friend's PSU later today.

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

• Clicking or Knocking with Seagate HD

  - by Daniel A. White

  My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to a recording below: http://www.pezcuckow.com/files/BeepingHardDisk.m4a This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

• ATI Radeon 5850 I cant seem to get 3 monitors up at the same time. 2 Monitors and a HDTV but still.

  - by Jan

  Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

  Read the article

• Just bought Logitech G35 headset, want to enable/disable headet in one action

  - by Roy Rico

  Hello, Just bought Logitech G35 USB headset, want to enable/disable headet in one action. I have windows 7 64 bit, and currently, to switch from the headset to my spakers (or vice versa) without unplugging the headset, i have to go thru this steps: right click on the sound icon select "sounds" select the "Playback" tab right click headset and hit enable right click speakers and hit disable same steps when wanting to switch back I have to disable the devices, because not all of the programs which are outputting sound will switch immediately if I just set either device to default. I am looking for this to be a single action (either a batch script or a windows shortcut to some action with parameters?) Thanks!

  Read the article

• Turtle Beach Headset Chat Volume Wheel on Windows

  - by Todd Freed

  I have this headset http://www.turtlebeach.com/product-detail/headsets-legacy/ear-force-x11/235 I am using it with a Windows 8.1 PC using digital audio out on my motherboard (no dedicated sound card). The cable has 2 volume wheels labelled "Game" and "Chat". I would like to be able to control, say Google Hangouts or Skype volume with the chat wheel, and all other audio with the other wheel. Is this possible? The closest thing I can find is "Communications Device" vs "Device" under the Sound control panel in Windows.

  Read the article

• Is Samba Server what I'm looking for, and if so, what do I need? (currently on DD-WRT Micro)

  - by Anthony

  I am really confused as to what Samba actually does and how it works. Here's what I'm hoping it does: I set up a Samba server on my LAN, and everyone will be able to see each other's shared files and swap them. But some of the documentation makes it sound like it will just allow Mac/Linux computers to see Windows computers. Other bits of the documentation make it sound more like a local server, where a Linux machine would install Samba and they would see everyone and be visible to everyone, but that won't change if anybody else can see each other. While still other things I've read make it seem more like a file-server, where everyone sees each other but file transfers are not peer-to-peer but instead need a host disk for files to act as go between. So, assuming I'm even in the right ballpark of what Samba does in terms of my goal of total cross-visibility on the network, I am left with needing to know what I'd need to set up the server and whether it can be done and is worth it... DD-WRT's article on Samba is a bit ambiguous. One second it sounds as if I can run the server on micro as long as it's set up on a usb drive, but then it also sounds like micro can't run it at all, etc. If I can run it from a usb-connected drive, I still need to know if the files are actually stored on that drive. The dd-wrt article mentions: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by USB) to the router among all the computers connected to your network. That one part "to share a drive...among all the computers" makes it sound like the only benefit I get from Samba is a share drive that any OS on the network can see, but they still won't see each other. But I'm very hopeful I'm misreading this. If the computers can see each other but still need the disk, how much space is generally a good idea? I'm basing this on the idea that the drive is a temporary store point. Obviously I'd have to get a drive big enough to store everything people wanted to share if the drive is a full-on file server. If I do have this all wrong, is there any software that achieves what I have in mind? Something that connects to the main router to bridge all clients?

  Read the article

• I have nice headphones. Need a wireless USB microphone so I don't have to switch to a headset to make a call

  - by mattalexx

  Right now, I have a pair of Sennheiser HD595 headphones. They are plugged into a DAC/headphone amp. I spend all day listening to music through them and they sound awesome. Then, for making calls, I have a wireless USB headset from Logitech. Problem is, I can't make calls when I'm wearing my Sennheisers but I wouldn't want to listen to music all day using the Logitech headset. So I spend my day switching in between. So the question is, how can I make calls while wearing the headphones of my choice? One thing I thought of is a wireless USB microphone that I can clip to the Sennheisers. So I'd wear the Sennheisers with this mic all day and ditch the Logitech headset. But it doesn't look like anyone makes a microphone like this. By the way, I would love if the solution didn't transmit the sound of my clacky keyboard or noisy wood flooring.

  Read the article

• No HDMI audio - Windows 8 - ASUS H81M-PLUS

  - by Paul Wright

  I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

  Read the article

• Limit of dvd rom

  - by user23950

  I have lite on dvd rom. And I'm going to copy lots of files from maybe 40-70 dvd's. And I'm using this dvd rom for about 4-7 months now. And I have also burned lots of dvd's. and I've copied the 2nd dvd. But the rom is making sound. A sound that I do not hear frequently. Does it depend on the dvd's that I'm reading or my dvd rom is getting old. How many dvd's do you think the rom can copy without threatening its health

  Read the article

• Why doesn't video run smoothly on my laptop anymore?

  - by andygrunt

  This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

  Read the article

• I have static noise in my speakers and headset

  - by Kazarion

  I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

  Read the article

• Speakers will not work after I use USB Headset

  - by Josh K

  I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

  Read the article

• Making my computer an iPhone music dock?

  - by deddebme

  Are there any application which lets me play the music in my iPhone through the USB cable? It will be very convenient if I can just dock the phone (while the music is playing), and the music will come out from the computer's speakers instead of the speaker in the iPhone. Edit 1: Stock iPhone dock does have a line-out jack, thanks SidneySM for reminding me. Now the problem is, even though I have select Line In as the Sound Input in Mac OSX, there is no sound coming out from the speaker. How do I make the Speaker output the Line In audio?

  Read the article

• Getting iTunes to play third party AAC files

  - by Redmastif

  I have a library filled with some old MP3 files and I'm in the process of changing them all to AAC for the better sound quality. Obviously I can't just create AAC versions of the files I already have because they would sound worse (lossy compression to converted to more lossy compression), so I'm going to their source and downloading them in a lossless form and using a third party to make them into AAC. Apparently iTunes will not handle AAC files that aren't made with iTunes. Is there a way around this? I've looked at third party programs and would be willing to use them, but since they all require the iTunes/iPod/iEverything driver, I don't know if they would still prevent my files or not. Also before you jump on my back about pirating, these files are from old CDs that I lost years ago. I paid for them. Thanks.

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >