Search Results

Search found 29426 results on 1178 pages for 'user99572 is fine'.

Page 790/1178 | < Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >

• Making the iPhone work with stripped down Windows XP

  - by Gabriel

  Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

  Read the article

• Xbox 360 formatting for MP4 h.264?

  - by Kayle

  For the life of me, I can't get the Xbox 360 to recognize anything other than a WMV. It's full updated with Xbox Live and I even added all the Video apps (Zune, Netflix, etc) just to see if it would force some sort of codec update. I'm using handbrake, at the moment, to try and convert an mkv with subtitles. Handbrake burns the subtitles into the video for me, which is important. I can't figure out what is missing though, as the Xbox refuses to acknowledge my MP4s. Here's the VLC codec info output: As far as I can tell, this is EXACTLY what the xbox supports. I don't want to convert every video twice by throwing it through Windows Movie Maker just to get it to WMV. None of the converters mentions above output to WMV and I don't like WMV since it's not as universal as MP4. I've tried changing the container name manually to M4V, MOV, and AVI to see if I can trick the Xbox... no beans. The video displays perfectly in WMP, of course. If I convert it to WMV, suddenly it works fine. But I don't find this acceptable, as I know the Xbox is supposed to support other filetypes. If anyone knows why my Xbox won't play anything but WMVs, I would be very appreciative to know why! It's driving me nuts. The only other information I can think to include is that it's about 3 years old and of the cheapest variety (Xbox Arcade). I've added a hard drive, xbox live, and have thoroughly updated it. Maybe there's a specific video update I'm unaware of??

  Read the article

• Two domains, two servers, one dynamic IP address

  - by giantman

  I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

  Read the article

• How do I fix this Windows 7 wireless connectivity issue?

  - by Charles Randall

  I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

  Read the article

• Using dnsmasq for accessing multiple nameservers assigned by DHCP

  - by Ash

  At my work desktop running openSUSE 11.4, I have a local network which gets its address, domain (work.site) and nameservers (10.100.1.1, 10.100.1.2) info through DHCP - which get written into /etc/resolv.conf I get to access the internet using the work network, and these 2 nameservers end up returning the entries for any public domain name lookups on the internet. I also have a private VPN that I end up connecting. The nameserver (10.111.1.1) and domain (private.site) are rarely bound to change for this network, but currently they're pushed by the openVPN client into networkmanager, and which also gets merged with the existing /etc/resolv.conf My resolv.conf ultimately ends up looking like this: search private.site work.site nameserver 127.0.0.1 nameserver 10.111.1.1 nameserver 10.100.1.1 As you can see the 2nd nameserver from my work network was pushed out because of the max 3 entry limitations. It is fine still, but would be a problem if that nameserver goes down for maintenance or something. So I found out that dnsmasq could help me here, and hence I setup dnsmasq just as a local DNS resolver without any DHCP support. So right now this is my /etc/dnsmasq.conf: resolv-file=/etc/resolv.conf server=/private.site/10.111.1.1 server=/1.111.10.in-addr.arpa/10.111.1.1 listen-address=127.0.0.1 bind-interfaces log-queries I've made dnsmasq get the list of nameservers from /etc/resolv.conf since NetworkManager seems to be updating this list correctly (for a max of 3 nameservers). I'm able to resolve the host names in both the networks correctly. So these are the questions I have: Is there a way I can make either NetworkManager or dhclient write out the list of nameservers somewhere else which I can make dnsmasq use as resolv-file ? How do I make dnsmasq use certain nameservers as the default for all queries ? Right now I notice that lookups for public domains on the internet are usually sent to both the nameservers - the one on work.site as well as private.site. It would be good if I can limit this only to work.site.

  Read the article

• Why are symbolic links not working in MySQL?

  - by Eno

  I'm having an issue, I searched a lot but I'm not sure if it's related to a previous security patch. On the last version of MySQL on Debian Lenny ( 5.0.51a-24 ) I need to share one table between two db, those two db are in the same path ( /var/lib/mysql/db1 & db2 ). I created symbolic links for db2 pointing to the table in db1. When I query the same table from db2 I get this : 'ERROR 1030 (HY000): Got error 140 from storage engine' This is how it looks : test-lan:/var/lib/mysql/test3# ls -alh drwx------ 2 mysql mysql 4.0K 2010-08-30 13:28 . drwxr-xr-x 6 mysql mysql 4.0K 2010-08-30 13:29 .. lrwxrwxrwx 1 mysql mysql 28 2010-08-30 13:28 blbl.frm -> /var/lib/mysql/test/blbl.frm lrwxrwxrwx 1 mysql mysql 28 2010-08-30 13:28 blbl.MYD -> /var/lib/mysql/test/blbl.MYD lrwxrwxrwx 1 mysql mysql 28 2010-08-30 13:28 blbl.MYI -> /var/lib/mysql/test/blbl.MYI -rw-rw---- 1 mysql mysql 65 2010-08-30 13:24 db.opt I really need those symlinks, is there a way to make them working like before ? ( old MySQL-server is fine ) Thanks,

  Read the article

• Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

  - by Madiyaan Damha

  I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running default ubuntu vnc server. I have another computer that has a resolution of about 1200x1024 that I use to vnc into the server (I use the default ubuntu vnc viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: 1) Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how windows media player or vlc scales down the window (and does some interpolation of pixels). 2) Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. 3) Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there. Thanks,

  Read the article

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Linksys/Cisco Small Business SRW-Series (ie SRW248G4) - Overcoming the Limitations

  - by Warren P

  We just purchased a Cisco/Linksys SRW 248G4 switch to try it out. We have always had unmanaged switches before, and this is our first "somewhat managed" switch. So far the major limitations are: Only Internet Explorer 6 (manual says IE 5.5!) works for the web interface SSH exists but is not practically useable because the only key length that is supported is no longer even used by most modern SSH installs. (I get the error "RSA modulus too small" in openssh 4.x/5.x) This is with the latest firmware revision, I believe, although Cisco's website does not actually tell you what version you're downloading. All in all, I think, they must be trying to tell me that if I want a good-quality switch, I shouldn't buy these SRWs and should buy a Dell or an HP ProCurve, or save up my pennies, and buy a Catalyst. The question here, then, at long last: Has anyone gotten the web-browser to work via some IE 7 or IE 8 compatibility mode settings or used another browser (Opera? KDE/Safari/WebKit?) and spoofed IE6? Is there any way to get the SSH key length upgraded? I'm guessing a 0% chance of a yes on that last one. I found an XP machine, used telnet (via PuttyTel.exe) and IE6 to set this up, and I doubt we'll have to touch it again. Which is fine with us. But it would be nice if I could administer this thing from either (a) a linux box, or (b) my primary desktop which is windows 7. It looks like XPMode with IE6 on the virtual XP machine may be my only way to administer this type of switch via the web.

  Read the article

• SSL on local sub-domain and sub-sub-domain

  - by Eduard Luca

  I have both local.domain.com and lmarket.local.domain.com pointing to my localhost from etc/hosts. The problem is that I am using XAMPP on Windows 7, and have 2 SSL VirtualHosts in my apache config, but no matter which one I access, I am taken to local.domain.com. On non-HTTPS requests all works fine, and the vhosts are basically the same. Here is the relevant part of my vhosts: <VirtualHost local.domain.com:443> DocumentRoot "C:/xampp/htdocs/local" ServerName local.domain.com ServerAdmin webmaster@localhost ErrorLog "logs/error.log" <IfModule log_config_module> CustomLog "logs/access.log" combined </IfModule> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile "conf/ssl.crt/server.crt" SSLCertificateKeyFile "conf/ssl.key/server.key" <FilesMatch "\.(cgi|shtml|pl|asp|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "C:/xampp/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> <VirtualHost lmarket.local.domain.com:443> DocumentRoot "C:/xampp/htdocs/lmarket.local" ServerName lmarket.local.domain.com ServerAdmin webmaster@localhost ErrorLog "logs/error.log" <IfModule log_config_module> CustomLog "logs/access.log" combined </IfModule> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile "conf/ssl.crt/server.crt" SSLCertificateKeyFile "conf/ssl.key/server.key" <FilesMatch "\.(cgi|shtml|pl|asp|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "C:/xampp/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> If I invert these blocks, then the opposite happens: local.domain.com goes to lmarket.local.domain.com. Any help would be appreciated.

  Read the article

• Our application is responding different on client server

  - by WtFudgE

  I have an application running on our local server and it works perfect. However when I deploy my application to our client's server there are problems. If i copy all the sources to another local from their server, it works fine again.... I am talking about an ASP.NET application talking with windows server 2008. The server specs of our client are: intel Xeon 2.13 GHz 6 GB RAM 300 GB HDD windows server 2008 R2 Although I think it's not that important I will describe the problems I am talking about to give u a better idea: It is related to upating and deleting fields in the sql server. Whenever there is more than one user running the application, and updates or deletes (not even the same record!0, there seems to be fields updating/deleting wrongly. But as I said before, if we copy the source to another server it is not the case. So I assumed it is more configuration related. Do you guys have any idea what the issue could be? Thanks a lot EDIT: my client old me he disabled the sql related accounts Could this be related?

  Read the article

• RPM Spec How to specify in package so that previous RPM is removed

  - by user123819

  Question: What do I put in the foo.spec file so that the rpm's will remove the previous rpm before installing? Description: I have created a spec file that creates rpm's for a few packages that use the same source and provide the same service, each with a slightly different configuration. E.g. they each provide the same "capability" Here's an example of the essentials that my .spec file looks like: %define version 1234 %define name foo %define release 1 %define pkgname %{name}-%{version}-%{release} Name: %{name} Version: %{version} Release: %{release} Provides: %{name} %package one Summary: Summary for foo-one Group: %{group} Obsoletes: %{name} <= %{version} Provides: %{name} = %{version} %description one Blah blah blah %package two Summary: Summary for foo-two Group: %{group} Obsoletes: %{name} <= %{version} Provides: %{name} = %{version} %description two Blah blah blah # %prep, %install, %build and %clean are pretty simple # and omitted here for brevity sake %files one %defattr(-,root,root,-) %{_prefix}/%{pkgname} %files two %defattr(-,root,root,-) %{_prefix}/%{pkgname} When I install the first one, it installs ok. I then remove the first one, and then install the second one, that works fine too. I then install the first one, followed immediately by installing the second one, and they both install, one over the other, but, I was expecting that the second one would be removed before installing the second. Example session: # rpmbuild foo and copy rpms to yum repo $ yum install foo-one ... $ yum list installed|grep foo foo-one.noarch 1234-1 @myrepo $ yum install foo-two ...[Should say that it is removing foo-one, but does not]... $ yum list installed|grep foo foo-one.noarch 1234-1 @myrepo foo-two.noarch 1234-1 @myrepo $ rpm -q --provides foo-one foo = 1234 foo-one = 1234-1 $ rpm -q --provides foo-two foo = 1234 foo-two = 1234-1 What do I put in the foo.spec file so that the rpm's will remove the previous rpm before installing? Thank you, .dave.

  Read the article

• Exim rejects recipient address on my domain

  - by Nicolas

  Hi, I have a dedicated server (debian) on which I have installed Exim and Dovecot. Everything worked fine until around a month ago. I tried to reinstall and reconfigure exim but I keep having all the incoming emails rejected. Outlook says: A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after RCPT TO:: host mail.mydomain.com [94.76.##.##]: 550 relay not permitted GMAIL: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). On the server side, my rejectlog file shows: 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted ... and the mainlog file: 2011-01-04 17:00:01 1PaAEr-0007vN-DX <= root@ETC_MAILNAME U=root P=local S=869 2011-01-04 17:00:01 1PaAEr-0007vN-DX ** root@etc_mailname: Unrouteable address 2011-01-04 17:00:01 1PaAEr-0007vY-Kn Error while reading message with no usable sender address (R=1PaAEr-0007vN-DX): at least one malformed recipient address: root@ETC_MAILNAME - malformed address: _MAILNAME may not follow root@ETC 2011-01-04 17:00:01 1PaAEr-0007vN-DX Process failed (1) when writing error message to root@ETC_MAILNAME (frozen) 2011-01-04 17:09:21 no IP address found for host MAIN_RELAY_NETS (during SMTP connection from mail-qw0-f53.google.com [209.85.216.53]) 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted then after the message becomes frozen: 2011-01-04 17:28:44 1PaAEr-0007vN-DX Message is frozen Thank you for your help, any idea/comment is welcomed as I am really running out of idea to fix this issue, Nicolas. Oh and the PHP mail() function does not do anything as well, would it be linked to? I think mail() uses sendmail from my php.ini.

  Read the article

• Switch Text Paragraphs in OpenOfficeOrg Writer mailmerge

  - by Glen S. Dalton

  I am using mailmerge to write the same letter with minor differenes to many peolpe. I experienced that switching text paragraphs depending on database values was not easy for me. I ended up putting huge text paragraphs into the database becaus switching did not really work for me. Actually I dont' understand how writer does it and maybe the boolean evaluation is buggy? There is some possibility making paragraphs invisible depending on database fields, but it was frustrating. After marking a paragraph as invisible (depending on a condition) it went invisible in the main document and did not come back, I lost the content. An example in pseudocode of what I want in my mailmerge document: {if [[balance]] 10} We owe you money. Please can you send your bank details. {end if} {if [[balance]] < -10} Please transfer the remaining amount to our banc account 123... {end if} Maybe this could be done with makros? But how to combine makros with mailmerge? Can you tell me what are the pitfalls and how to master them? I once did this with ms word, it was a lot easier. The normal mailmerge (including database fields in the letters) works fine for me in OpenOffice writer.

  Read the article

• Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

  - by Kyle Noland

  I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here. EDIT: I found another person who has the exact same problem as me: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14451763

  Read the article

• SIP and NAT routers?

  - by OverTheRainbow

  Hello SIP was not built with NAT routers in mind, and I'd like to get to the bottom of this issue to check what needs to be done on all devices so it works with NAT routers, and understand in what context it just can't be used and I should check more NAT-friendly alternatives like IAX. A picture being worth a thousand words, here's the layout I need to use: http://img62.imageshack.us/img62/4077/sipandnatrouters.jpg The PBX server is located in the private LAN behind a NAT router connected to the Internet (I know it'd be easier if it were located in the public network, but this router doesn't support DMZ's so the server has to be in the private network) A couple of (soft|hard)phones are located on the same LAN and connected to the PBX server, along with a PSTN gateway (Linksys 3102 or a Digium PCI card) Remote users using (soft|hard)phones are located somewhere on the Net with dynamic IP's and are also located behind NAT routers I may or may not have control over the local NAT router where the PBX server is located, but I have no control over the remote NAT routers, either because the users don't have the computer knowledge to map ports or because the routers are off-limit (eg. web cafés, hotel LAN's, etc.) Is it possible to configure the PBX server, the (soft|hard)phones, and the PSTN gateway so that the all conversations work fine, no matter the endpoints (POTS caller/local phone, POTS caller/remote phone, local phones, remote phone/local phone)? In which cases may I expect problems, and are there solutions? FWIW, I'm leaning toward using Freeswitch, but I could end up using Asterisk if there are technical advantages to it in this context. Thank you for any info.

  Read the article

• Windows Server 2008 Create Symbolic Link, updated Security Policy still gives privilege error

  - by Matt

  Windows Server 2008, RC2. I am trying to create a symbolic/soft link using the mklink command: mklink /D LinkName TargetDir e.g. c:\temp\>mklink /D foo bar This works fine if I run the command line as Administrator. However, I need it to work for regular users as well, because ultimately I need another program (executing as a user) to be able to do this. So, I updated the Local Security Policy via secpol.msc. Under "Local Policies" "User Rights Management" "Create symbolic links", I added "Users" to the security setting. I rebooted the machine. It still didn't work. So I added "Everyone" to the policy. Rebooted. And STILL it didn't work. What on earth am I doing wrong here? I think my user is even an Administrator on this box, and running plain command line even with this updated policy in place still gives me: You do not have sufficient privilege to perform this operation.

  Read the article

• r1soft agent is failing with the error: "write error while sending code: Broken pipe"

  - by curiousguy

  I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

  Read the article

• MAC addresses on dual-NIC mainboards

  - by Tom O'Connor

  Here's a weird problem. We've got a number of devices with dual-NIC mainboards. Some are Realtek NICs, which suck. Some are Intel e1000s, which don't. I've just noticed on 2 machines, one is an Intel NIC, one is a Realtek, that when I put the MAC address of one machine into the dhcpd.conf file on our DHCP server to get it to PXE boot the machine into a rebuild environment, initially everything is fine. The server gets a DHCP allocation, and PXE boots into the Ubuntu preseed enviroment. On one or two machines, it gets as far as Ubuntu's DHCP network configuration, and fails. If i pull up a busybox shell (on tty2 on the installing machine), and run ip link, I can see that the UP flag is set on the other NIC. Here's some stuff. host xeon16-ghz240-gb48-node1 { hardware ethernet BC:AE:C5:07:1F:18; filename "pxelinux.0"; next-server 192.168.123.80; } That's what's in dhcpd.conf This is what ip link on the evil machine looks like. Only one NIC is actually connected (deliberately). As you can see, the NIC that's in the dhcpd config, is not marked as UP, and the link that is UP, isn't the one in DHCP. So far I've seen this on two brands of dual-NIC configuration. Does anyone know 1) what's causing it, and b) What we can do about it?

  Read the article

• Unable to access Windows share

  - by mbnoimi

  I've installed Alfresco 4.2.d under Ubuntu 12.04 LTS; Everything done fine except I can't access it from Windows share although I got the link from Alfresco explorer which is: file:///%5C%5CECSA%5CAlfresco%5CSites%5Cswsdp%5CdocumentLibrary%5CAgency%20Files%5CImages%5Ccoins.JPG I tried to access it from: \\ECSA but I failed too so I made a ping (192.168.0.70 is server IP) then I got: C:\Users\user>ping 192.168.0.70 Pinging 192.168.0.70 with 32 bytes of data: Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.70: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\user>ping ECSA Ping request could not find host ECSA. Please check the name and try C:\Users\user> Some logs of what's going on: C:\Users\user>net view ECSA System error 1707 has occurred. The network address is invalid. C:\Users\user>nbtstat -a 192.168.0.70 Local Area Connection: Node IpAddress: [192.168.0.84] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- ECSA <20> UNIQUE Registered ECSA <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 C:\Users\user> CIFS Server Configuration in file-servers.properties ### CIFS Server Configuration - file-servers.properties ### cifs.enabled=true cifs.serverName=${localname}A cifs.domain= cifs.broadcast=255.255.255.255 cifs.bindto=192.168.0.70 cifs.ipv6.enabled=false cifs.hostannounce=true cifs.disableNIO=false cifs.disableNativeCode=false cifs.sessionTimeout=900 cifs.maximumVirtualCircuitsPerSession=16 cifs.tcpipSMB.port=445 cifs.netBIOSSMB.sessionPort=139 cifs.netBIOSSMB.namePort=137 cifs.netBIOSSMB.datagramPort=138 cifs.WINS.autoDetectEnabled=true cifs.WINS.primary=192.168.0.70 cifs.WINS.secondary=192.168.0.1 cifs.sessionDebug= cifs.pseudoFiles.enabled=true cifs.pseudoFiles.explorerURL.enabled=true cifs.pseudoFiles.explorerURL.fileName=__Alfresco.url cifs.pseudoFiles.shareURL.enabled=false cifs.pseudoFiles.shareURL.fileName=__Share.url How can I fix this issue?

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• Running SSL locally on a hosts redirected domain name with Ubuntu and Apache

  - by Matthew Brown

  I recently made some changes to my Ubuntu computer so that a domain name resolved to my local copy of Apache. I edited /etc/hosts and added 127.0.0.1 thisbit.example.com Then set up a VirtualHost for the responses I wishes to create. That all works fine and my testing is now shooting on ahead without harm or risk tot he production server. Now for my next trick I need to test the authentication and so need to do this with HTTPS Basically https://auth.example.com needs to work on my PC without the SSL causing an issue which I imagine would be the case as I am clearly not the true https://auth.example.com but for the basis of this exercise I need to pretend that I am. Now it might be that the Apps I'm testing don't worry about checking the certificate. (Many are in Java which I'm no expert with). What gotchas am I likely to encounter and what is the best way of not letting my own hacks spoil my testing? I'm guessing the place to start is to enable SSL with Apcahe... I've never done that before as it has never come up before.

  Read the article

• Localhost problems on Mac OS X 10.7

  - by Maya

  Sorry for the duplicate post ( http://stackoverflow.com/questions/9720871/localhost-problems-on-mac-os-x-10-7 ), but I got the advice that this is a better place to ask my question: I want to access a mysql server remotely over ssh. So I used port forwarding to access the remote 3306 port on my localhost as 8383. The ssh connection can established successfully. But when I want to telnet onto port 8383 on localhost I get the following error: ~: telnet 127.0.0.1 8383 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host I tried the same on a friends Laptop (also Mac OS X 10.7) and it worked fine, so it is very unlikely that the ssh connection is the problem. I assume it has something to do with my local network configuration. I turned off IPv6, just in case. My /etc/hosts looks like this: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I would greatly appreciate any help. Please point me in the right direction if this is not the right place to ask this question.

  Read the article

• Windows Terminal Server: occasional memory violation for applications

  - by syneticon-dj

  On a virtualized (ESXi 4.1) Windows Server 2008 SP2 32-bit machine which is used as a terminal server, I occasionally (approximately 1-3 event log entries a day) see applications fail with an 0xc0000005 error - apparently a memory access violation. The problem seems quite random and only badly reproducable - applications may run for hours, fail with 0xc0000005 and restart quite fine or just throw the access violation at startup and start flawlessly at the second attempt. The names of executables, modules and offset addresses vary, although a single executable tends to fail with same modules and the same memory offset addresses (like "OUTLOOK.EXE" repeatedly failing on module "olmapi32.dll" with the offset "0x00044b7a") - even across multiple user's logons and with several days passing without a single failure inbetween. The offset addresses seem to change across reboots, however. Only selective executables seem affected by the problem, although I may simply not be seeing a sufficient number of application runs from the other ones. I first suspected a possible problem with the physical machine's RAM, but ruled this out as a rather unlikely cause - the memory comes with ECC and I've already moved the virtual machine across several times, without any perceptable change. I've seen that DEP was enabled in "OptOut" mode on this machine: C:\Users\administrator>wmic OS Get DataExecutionPrevention_SupportPolicy DataExecutionPrevention_SupportPolicy 3 and tried changing the policy to OptIn via startup options: bcdedit.exe /set {current} nx OptIn but have yet to see any effect - I also would expect Outlook 12 or Adobe Reader 9 (both affected applications) to play well with DEP. Any other ideas why the apps may be failing?

  Read the article

• ASA DHCP Relay configuration..

  - by Jeff

  I have locations in different cities, connected using 2 Cisco ASA devices. my main location, corporate, use the IP 192.168.1.x The second location, remote store, use the IP 192.168.3.x I have a DHCP server (192.168.1.254) at my corporate location. I have created a scope for the 192.168.1.x which works fine for the corporate location. I created a scope for the remote location (192.168.3.x) on my DHCP server and tried to configure the remote ASA DCHP Relay, on the remote ASA: I disabled the DHCP Server on the inside. I enabled DHCP Relay on the inside, with set route set at yes. I set the Global DHCP Relay Servers, specify up to four servers to which DHCP requests would be relayed. I added my DHCP, 192.168.1.254 I flashed these settings to the ASA and gave it a try, didn't do anything. am i missing something - forgetting something. not really sure what im doing wrong. DHCP Settings on remote ASA: dhcp-client update dns server both dhcpd dns 192.168.1.254 dhcpd ping_timeout 750 dhcpd domain JEWELS.LOCAL dhcpd auto_config outside dhcpd update dns both ! dhcpd address 192.168.3.2-192.168.3.33 inside ! dhcprelay server 192.168.1.254 outside dhcprelay enable inside dhcprelay setroute inside on my local ASA: i have two ACLs for UDP ports 67 and 68 permitting any inbound traffic from the remote locations IP ... dhcprelay timeout 120

  Read the article

< Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >