Search Results

Search found 33382 results on 1336 pages for 'end tag'.

Page 794/1336 | < Previous Page | 790 791 792 793 794 795 796 797 798 799 800 801  | Next Page >

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

• How to control fan speed using SpeedFan?

  - by John Young

  The CPU fan in my laptop is running too fast. I wish to control the speed manually to my preference, at times. Here is a CPU-Z screenshot of my laptop configuration: http://i.stack.imgur.com/1oST1.png And here is how SpeedFan window looks at my end: http://i.imgur.com/BIi0RdJ.jpg I have no idea how to use SpeedFan to control my laptop's CPU fan speed. How to configure it so that I can increase and decrease speed of the fan at my will? Edit: Sorry, the first image wasn't as intended, so I've corrected it now. Also, if someone can edit the post and embed the images in the post, that would be great. I need at least 10 reputation to successfully accomplish that.

  Read the article

• Problem with fitting graphics card

  - by Gary Robinson

  I have recently purchased a new radeon hd5670 graphics card. The problem I have is that it is what I might call a double height card. So the end where you fix the card to the case is twice the size of the card it is replacing. But this means that it is blocked by the rear of the network card. The only way I can see it to cut that part of the fixture part out then I won't have a problem. But has anyone any suggestions what I could use? To be clear it is not the actual card it is the fixture part which is 90 degress to the card that is causing the problem. Unless someone knows of another solution - some kind of pci-e extender that I could use as I could easily

  Read the article

• some keyboard keys not working properly

  - by surfmadpig

  I'm using windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

  Read the article

• Browsing freezes after installing SP2 on Vista

  - by n21jc

  After installing SP2 on Vista 32-bit HP laptop, all browsers (Firefox, IE, Maxthon) periodically freeze randomly. It occurs when opening a new webpage. It might happen after 45 minutes of browsing, or 3 minutes. The only way to get out of it is to right click the taskbar, "end program", and say "close now" when it tries to search for a solution. Or occasionally, I have to hard reboot. It doesn't seem to correlate with any one particular type of webpage, but I'm assuming that something being loaded doesn't play well with my system. I would uninstall SP2, but it fixed several even more annoying system problems I'd had with my computer.

  Read the article

• Lustre - is this bad form?

  - by ethrbunny

  Im going to be consolidating several 'server rooms' into a single installation soon. Part of this effort will be finding a home for 5Tb (and growing) of files / logs. To this end Im looking at Lustre and appreciating its ability to scale. The big vendors want to sell me a $20K SAN to manage this but Im wondering about buying several iSCSI units (like this http://www.asacomputers.com/3U-iSCSI-Solution.html) and using VMs for the OSS machines. This would let me fail-over to cover problems and not require a dedicated system for each OSS. Given articles like this (http://h30565.www3.hp.com/t5/Feature-Articles/RAID-Is-Dead-Long-Live-RAID/ba-p/1422) that talk about how RAID is not keeping up with drive density Im leaning towards more disks with lower capacity each. Again - some akin to the iSCSI array above. Tell me why this is a terrible idea. Do I really need to invest in a PE710 for each OSS/OST?

  Read the article

• How to troubleshoot if a zip file is valid or if it is big file size to be unzipped ?

  - by mireille raad

  Hello , I am trying to unzip a file with the size of 2GB I am getting the following error : unzip CLTE_C_08.zip Archive: CLTE_C_08.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of CLTE_C_08.zip or CLTE_C_08.zip.zip, and cannot find CLTE_C_08.zip.ZIP, period. After some googling, some people say that this error is because the file is too big, others say because file is corrupt, others say that it could be a not unix archive. So my question , how to find out if file is valid archive file on my Centos and what is the command/trick to uncompress big files ( if any ) Thanks in advance :)

  Read the article

• Force Windows to cache executables without running them?

  - by Josh Einstein

  Is there a way to force Windows to pre-load certain EXE/DLL binaries into its prefetch/superfetch cache as if they had been executed? I have a particular application that loads pretty slowly on first run but if it's "warm" (recently executed) it starts pretty quickly. I'd like to prime the cache early in the background before the application is needed. But since it shows a UI, I'm looking for a way to do this silently. So simply launching the application it isn't ideal. Thanks you in advance. Prompted by David's suggestion in the comments, I wrote a PowerShell script to memory map the files, seek to the end, and close them. I haven't done any controlled tests yet and it could just be my imagination, but Sublime Text (the application in question) appeared to load much more quickly this time around and I haven't used it for several hours.

  Read the article

• LSB Script: how do i know if something goes wrong?

  - by ianaz

  How do I know if a LSB script fails to load or where do I check the log of the lsbs scripts? I added two scripts with the following command: update-rc.d scriptname defaults And just one launches the things I need. It does not seem to be a script error since if I launch it with /etc/init.d/scriptname it works. This is my script: #!/bin/bash ### BEGIN INIT INFO # Provides: nodes # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts all node apps # Description: Starts all node apps like AAM, AMT,... ### END INIT INFO echo "Launch Node applications with forever" export PATH=/usr/local/bin:$PATH # Starts the redis server redis-server # Starts AAM forever -o /var/log/AAM.log -e /var/log/AAM.log --spinSleepTime 2000 -m 5 start /var/nodejs/AAM/app.js

  Read the article

• LAMP server has gone down a few times. Ideas for server optimization?

  - by MattB

  Hi all, Our production web server has gone down a few times over the course of the last half year. In the end, we've needed to contact the web host and have them restart as I'm unable to even SSH in. This appears to only affect the web server and not the MySQL database server which is separate. When it affects the web server, all hosted websites time out. I'd like to examine web server optimization/corrections to get to the root of this issue. Any recommendations on how to proceed with that? I'm sure log files would play a role. I'm able to find my way around a Linux-based server and make needed changes, but would be interested in any tips I may not have thought of yet. It may be best for us to speak with an outside consultant as another option. Thanks.

  Read the article

• What applications is NTFS preferable for? [closed]

  - by javano

  When building a new server I prefer to deploy Linux as my OS of choice. This gives me the luxury of being able to choose from various file systems (amongst other aspects), and I will choose a different FS for different servers, depending on what they will be used for. With Windows OS variants you can only use NTFS. Have any benchmarks or tests been performed that have shown NTFS to be a preferable choice for a given scenario or application (apart from just "running Windows" because it has to be on NTFS). To clarify what I mean; I might use filesystem X for large transactional storage volumes, but filesystem Y for front end web app servers. If I had a multi-platform application to deploy that (let's pretend) was available on Mac/Win/Lin, is there any type of application or scenario that would benefit from being on NTFS?

  Read the article

• How can write a mod_rewrite rule to determine if the domain is not the main domain then change https:// to http://

  - by Oudin

  I've set up a WordPress multi-site with a wildcard ssl for example.com to access the admin area securely. However I'm also using domain mapping to map other domains to other sites e.g. alldogs.com to alldogs.example.com. The problem is when I'm trying to access the front end of a site from and admin for a mapped domain e.g. alldogs.com by clicking "Visit Site" the Link goes to https://alldogs.com because of the forced ssl applied to the admin area. Which produces a certificate warning since the certificate is for example.com and not alldogs.com. How can write a mod_rewrite rule to determine if the url/link clicked on is not the main domain e.g. example.com then change the https:// to http:// so the site can be accessed via port 80 and not generate a certificate warning for that mapped domains

  Read the article

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• Returning Shapes to Default in Excel

  - by Craig

  Hi, I have around 70 shapes in a planning document i use for work, everything is fine but i am trying to add a new feature. These shapes are changed using edit points each week to show up on a map, but sometimes shape "A" may not get used in which i just want to turn it back to a default size along with all the other shapes. Does anyone know how i could achieve this via a Macro, i have tried lots of things and searched everywhere but i am at my wits end... If a shape is not default, set all non default shapes to default size. Thanks in advance

  Read the article

• Pre-set OS X dock icon positions for non-permanent apps?

  - by Jack Sleight

  Is it possible to have OS X always place certain app icons in specific places (eg. position "two") in the dock, when they're not permanently docked apps? At the moment every non-permanent app is added to the end (far right), but, for example, if I have my mail and todo list apps open, I want them to pop up in positions one and two. I know this can easily be achieved by permanently docking icons, I'm specifically looking for a solution for non-permanent apps. I suspect OS X has no built in facility for this, perhaps there's a 3rd party app or script/command line trick?

  Read the article

• MySQL gzipped Export in PhpMyAdmin has wrong size in Mozilla

  - by Michal Gow

  That is really strange. I am using PhpMyAdmin 2.11.9.6 on Linux hosting. While I am Exporting databases using "gzipped" compression in Mozilla, I am getting files which have size of uncompressed database, but they seems to be downloading in incredible speed (10 times quicker than is possible using my ISP). So at the end: for database of 10M size I am getting 10M gzip downloaded in miniseconds it has indeed shown 10M size on drive it is corrupted Zip compression is working just fine (I am getting file with cca 1M size with fine content of compressed database) And the weirdest thing: that is happening for Mozilla Firefox (13.0.1) only, Internet Explorer 9 is downloading correct gzipped files... Any hint?

  Read the article

• Deleting sender from Outlook Safe Senders using GPO?

  - by Hutch

  We're having an external company do a mailshot to our users. The message contains images that are linked rather than embedded in the image (bandwidth isn't an issue). So of course on recent versions of Outlook you're prompted to download the images, not the end of the world, but it would be nice if that didn't happen. There's a bug in the Office/Outlook ADM/ADMX templates that means that a custom list of Safe Senders won't import unless you follow this: http://support.microsoft.com/kb/2252421 Thing is, if I remove an entry from the Safe Senders file, it doesn't seem to remove it from Outlook, which seems odd?

  Read the article

• Chrome shows page shifted left

  - by davidsinjaya

  Courtesy of goal.com Check the pointer that I drew. It doesn't point the right arrow (-), however, it looks like hover on that arrow (arrow turns into green color). Moreover, when I press at that area, it will be directed to link that is specified by that button. Another bug is on the scroll bar. The display show the scroll bar is shifted left, so there is a gap. However, the area that can be clicked remain at the right end of the page.

  Read the article

• Can Squid 2.7 proxy gzipped content

  - by Tom Styles

  We have a forward proxy for our network which is Squid 2.7. This is managed for us by a third party. We noticed recently that http requests going from our network to the web were having the Accept-Encoding header removed. This was resulting in all web traffic across our network (approx 8000+ PCs) being uncompressed even though the browsers and server on each end were capable. We have asked the third party to look into this and they have said it is because Squid 2.7 does not support compression. I understand this to be true but I was under the impression that the compression happened on the webserver rather than the proxy. So... Can Squid 2.7 proxy and/or cache content that is gzipped? If it can, how/why might it be configured such that the Accept-Encoding header is being removed?

  Read the article

• SharePoint Calendar - Start time after a certain hour

  - by KodovaKim

  I am working with SharePoint Calendar list to create a shift schedule for a team (End user side of things, I am not writing code). I have added a few custom columns to the Calendar List Item. I have the list exported to excel where I have a Pivot table set up so I can see a summary of the different columns - I can see the person's name (From the title column), total hours they are scheduled for (separated into weekdays and weekends based on a custom column I added). What I need is a way to check the start time of the shift to determine if it is a Day shift (starts at 7am), Eve shift (starts at 3pm), or a Night shift (starts at 10pm). So, when creating a new calculated column I would assume the function I need would go something like "=If([StartDate]...." but I am not sure on the rest. Anyone know how I would write that function?

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• Google calendar sync has stopped working

  - by Andrew Heath

  I set up Google Calendar to sync with Lightning in Thunderbird. It has worked well for the last few weeks. It has now suddenly stopped working. I have checked the CalDAV addresses and they are all still ok. I do not know if my recent addition of syncing my new Android phone with the Google Calendar has anything to do with it, or just a coincidence. When Thunderbird tries to sync, it asks for the username and password. I enter these for the Google Calendar, and end up in a continuous circle.

  Read the article

• Mail Stuck in Backend Exchange Queue

  - by Kyle Brandt

  I have a message that has and is stuck in a queue on my backend mail server. The queue is: Internet Mail SMTP Connector (MY_FRONT_END_SERVER_NAME)-524350ff... It is in state retry with 183 failures. It is only one message and all other mail is flowing. The message is not particularly large. My limited understanding, a guess really, is that this message should get handed off to the front end mail server and sent to the remote hosts for which it is destined, so it should even matter if the remote host is up. However, I can telnet to the smtp provider of that host. How can I find out why it is stuck in this queue, and can I force it out somehow (unfreeze doesn't help me)?

  Read the article

• Creating a Scheduled Task that runs forever on Windows XP

  - by Mike Fiedler

  When I create a scheduled task, I do so via command line: schtasks.exe /Create /TN "startup-script" /TR "C:\startup.bat" /RU taskuser /RP taskpasswd /SC ONLOGON The idea is that this task run forever. The batch opens a java process that is never meant to end. I've used ONLOGON, as the machine auto-logs in as taskuser. All this works fine, for about 72 hours, after which the Duration flag kicks in and ends the process. Windows XP doesn't have the /DU flag on command line - is there an alternative method to creating a task that is meant to run from a system startup (doesn't even require logon) and runs forever, without touching a GUI?

  Read the article

• Migrating users and mailboxes from postfix / Maildir to Postfix with Mysql backend [closed]

  - by Chrispy

  Possible Duplicate: Migrating users and mailboxes from postfix / Maildir to Postfix with Mysql backend So I've got 60 or so users on a hand rolled postfix installation on openbsd and I'd like to move their mailboxes to our new mail server running iRedMail (postfix, vmail/mysql back end) Does anyone know of a good way to do this? Preferably a script I can run to keep syncing the users mailboxes as MX records get updated? I presume one way (though I don't have all their passwords!) would be to have a command line imap client that simulated the users copying their mail themselves but I'm sure there must be a shell / php script to migrate users? Anyone got any bright ideas? Chris.

  Read the article

< Previous Page | 790 791 792 793 794 795 796 797 798 799 800 801  | Next Page >