Search Results

Search found 27931 results on 1118 pages for 'custom configuration'.

Page 797/1118 | < Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >

  • running autobench (httperf)

    - by Matthew
    So I ran apt-get install httperf on my system and I can now run httperf. But how can I run 'autobench'? I downloaded the file and unarchived it and if I go in it and run autobench it says -bash command not found I think it's a perl script but if I run perl autobench, it says: root@example:/tmp/autobench-2.1.2# perl autobench Autobench configuration file not found - installing new copy in /root/.autobench.conf cp: cannot stat `/etc/autobench.conf': No such file or directory Installation complete - please rerun autobench Even if I run it again it says the same thing.

    Read the article

  • Late Model 2011 Macbook Pro with SSD appears to be off somehow

    - by chris
    Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

    Read the article

  • Run Grunt task in Visual Studio Release Build with a bat file

    - by Aligned
    Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/08/19/run-grunt-task-in-visual-studio-release-build-with-a.aspx 1. Add a BeforeBuild in your csproj file. Edit the xml with a text editor. <Target Name="BeforeBuild"> <Exec Condition="'$(Configuration)' == 'Release'" Command="script-optimize.bat" /> </Target> 2. Create the script-optimize.batREM "%~dp0" maps to the directory where this file exists cd %~dp0\..\YourProjectFolder call npm uninstall grunt call npm uninstall grunt call npm install --cache-min 604800 -g grunt-cli call npm install --cache-min 604800 grunt typescript requirejs copy less:compile less:mincompileThis grunt command will compile typescript, run the requireJs optimizer, complie and minimize less.3. Make it use the minified code when the Web.config compilation debug is set to false <!-- These CustomCollectFiles actions are used so that the Scripts-Release folder/files are included        when publishing even though they are not project references -->  <Target Name="CustomCollectFiles">    <ItemGroup>      <_CustomFiles Include="Scripts-Release\**\*" />  </ItemGroup>  </Target> That should be all you need to get a Grunt task to minify and combine JS (plus other tasks) in Visual Studio Release build with debug = false. This is a great video of Steve Sanderson talking about SPAs, npm, Knockout, Grunt, Gulp, ect. I highly recommend it.

    Read the article

  • How do I put back different SCSI hard drives into their original RAID arrays across different servers?

    - by Edgar
    I have potentially a big mess in my hands: I received today a box with several hard drives that used to be connected to different servers each one of them using an unknown - at least as of right now- RAID configuration. Regretfully, these are not marked and I'm not sure how to go about putting them back into their original servers. Currently I don't have much more information: I don't know what type of array was being used on each instance and I don't have any specifics about the RAID controller originally used on each one of the servers (currently these servers are at a remote location with no easy access). Is there a way to sort through this mess? What would be the consequences of using trial and error to go about it? This might be a very basic question but I don't have much experience dealing with RAID arrays.

    Read the article

  • Login takes very long, annoying repaints once a minute when logged in: How to troubleshoot?

    - by user946850
    I am suffering from a strange problem with my Gnome Shell in Ubuntu 12.10. The login takes very long ( 30 sec), with a blank screen. In Google Chrome and Thunderbird (and perhaps in other applications), the main window freezes and is repainted in periodic intervals of less than one minute. The freeze takes several seconds, and it seems that font and appearance of, e.g., tabs and buttons briefly changes. Attempting to enable the second monitor show an error message related to XRANDR. Everything seems to have started three days ago, after I had to force-shutdown the machine while it was hibernating due to low power. (It was hibernating for quite a while and didn't want to stop.) Silly me. I have tried the following measures, with no avail: Checked all package file md5 hashes using debsums Reinstalled all packages using a variant of dpkg --get-selection \* | xargs apt-get install -reinstall Temporarily moved configuration directories such as .gconf, .config and .gnome2 to another location Created a new user account When I choose "Ubuntu" during login, the problems disappear. I am sort of frustrated that reinstalling all packages didn't fix the issue. How to troubleshoot this Gnome Shell (?) problem, short of reinstalling the system? (Or did anyone see this kind of behavior on their machine?)

    Read the article

  • Ubuntu 12.04 still slow at mounting internal filesystem

    - by Matthew Goson
    I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

    Read the article

  • How to secure Apache for shared hosting environment? (chrooting, avoid symlinking...)

    - by Alessio Periloso
    I'm having problems dealing with Apache configuration: the problem is that I want to limit each user to his own docroot (so, a chroot() would be what I'm looking for), but: Mod_chroot works only globally and not for each virtualhost: i have the users in a path like the following one /home/vhosts/xxxxx/domains/domain.tld/public_html (xxxxx is the user), and can't solve the problem chrooting /home/vhosts, because the users would still be allowed to see each other. Using apache-mod-itk would slow down the websites too much, and I'm not sure if it would solve anything Without using any of the previous two, I think the only thing left is avoiding symlinking, not allowing the users to link to something that doesn't belong to them. So, I think I'm going to follow the third point but... how to efficiently avoid symlinking while still keeping mod_rewrite working?! The php has already been chrooted with php-fpm, so my only concern is about Apache itself.

    Read the article

  • I can't get grub menu to show up during boot

    - by wim
    After trying (and failing) to install better ATI drivers in 11.10, I've somehow lost my grub menu at boot time. The screen does change to the familiar purple colour, but instead of a list of boot options it's just blank solid colour, and then disappears quickly and boots into the default entry normally. How can I get the bootloader back? I've tried sudo update-grub and also various different combinations of resolutions and colour depths in startupmanager application with no success (640x480, 1024x768, 1600x1200, 16 bits, 8 bits, 10 second delay, 7 second delay, 2 second delay...) edit: I have already tried holding down Shift during bootup and it does not seem to change the behaviour. I get the message "GRUB Loading" in the terminal, but then the place where the grub menu normally appears I get a solid blank magenta screen for a while. Here are the contents of /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX=" vga=798 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"

    Read the article

  • Applying Service Pack 1 to Team Foundation Server 2010

    - by Enrique Lima
    Disclosure:  I performed the following activities on my Windows 7 SP1 system, Visual Studio 2010 SP1 and a local Basic installation of TFS 2010. As with any deployment of a service pack into a server environment, take your recommended precautions and be aware of the changes you are putting in.  With that said, make sure you backup your databases, and that you have an exit/rollback strategy in the event of an unexpected situation. Team Foundation Server 2010 Service Pack 1 corresponds to KB2182621.  The KB article is http://support.microsoft.com/kb/2182621 The process will be very simple to follow, you will need to execute the mu_team_foundation_server_2010_sp1_x86_x64_651711.exe file.  That will extract files needed and launch the wizard driven Installation. Once this process completes, you need to validate the changes. By looking at Team Foundation Server 2010 Administration Console, you should see the reference to the KB number and SP1. There is also a good reason to validate log locations and records. From the Team Foundation Server 2010 Administration Console. Or from Windows Explorer, go to the C:\ProgramData\Microsoft\Team Foundation\Server Configuration\Logs location and review the logs referenced by the servicing references.

    Read the article

  • Unidentified network: How to configure TCP/IPv4 for Win7?

    - by Zolomon
    When I try to connect to internet I keep getting the error "Unidentified network". I've tried numerous attempts at restoring access without success. IP release, flushing DNS cache, reinstalling NIC, reactivating NIC, resetting router and so on... I've read several times that it's my default gateway that's wrong. Currently I've had automatic IP/DNS configuration set without any problems, and then it stopped working for some reason. Anyone know how I specify the IP? My subnetmask is 255.255.255.0, default gateway is 192.168.0.1 but I have no idea how to determine what IP I should set. I use a D-Link DIR-655 and other computers on the network have IPs like 192.168.0.194, next is 192.168.0.197. (I'm completely lost and am trying to cool down after two weekends of debugging filled with despair.)

    Read the article

  • BoundingSpheres move when they should not

    - by NDraskovic
    I have a XNA 4.0 project in which I load a file that contains type and coordinates of items I need to draw to the screen. Also I need to check if one particular type (the only movable one) is passing in front or trough other items. This is the code I use to load the configuration: if (ks.IsKeyDown(Microsoft.Xna.Framework.Input.Keys.L)) { this.GraphicsDevice.Clear(Color.CornflowerBlue); Otvaranje.ShowDialog(); try { using (StreamReader sr = new StreamReader(Otvaranje.FileName)) { String linija; while ((linija = sr.ReadLine()) != null) { red = linija.Split(','); model = red[0]; x = red[1]; y = red[2]; z = red[3]; elementi.Add(Convert.ToInt32(model)); podatci.Add(new Vector3(Convert.ToSingle(x), Convert.ToSingle(y), Convert.ToSingle(z))); sfere.Add(new BoundingSphere(new Vector3(Convert.ToSingle(x), Convert.ToSingle(y), Convert.ToSingle(z)), 1f)); } } } catch (Exception ex) { Window.Title = ex.ToString(); } } The "Otvaranje" is an OpenFileDialog object, "elementi" is a List (determines the type of item that would be drawn), podatci is a List (determines the location where the items will be drawn) and sfere is a List. Now I solved the picking algorithm (checking for ray and bounding sphere intersection) and it works fine, but the collision detection does not. I noticed, while using picking, that BoundingSphere's move even though the objects that they correspond to do not. The movable object is drawn to the world1 Matrix, and the static objects are drawn into the world2 Matrix (world1 and world2 have the same values, I just separated them so that the static elements would not move when the movable one does). The problem is that when I move the item I want, all boundingSpheres move accordingly. How can I move only the boundingSphere that corresponds to that particular item, and leave the rest where they are?

    Read the article

  • Apache Balancing by source IP

    - by Daniel
    I am using Apache's Proxy Balancer to balance one sub domain (e.g. subdomain.domain.com) to an application which is located on 2 servers. Here an extract from my Apache configuration file: <Proxy *> Order deny,allow Allow from all </Proxy> <Proxy balancer://cluster1> BalancerMember http://server1:28081 route=w1 BalancerMember http://server2:28082 route=w2 </Proxy> ProxyPass /path balancer://cluster1/path ProxyPassReverse /path balancer://cluster1/path My question is, if it's possible to decide with the source IP-address which BalancerMember should be used for the request? To e.g. Requests from 1.2.3.4 to Member 1?

    Read the article

  • After installing updates, Windows 7 reboots when it gets to "Preparing to Configure"

    - by Travis
    After letting Windows 7 Pro install updates at shutdown I now cannot get it to boot back up. I have tried selecting safemode, and "last known working configuration" and I get the same results. It gets to the screen and says "Preparing to configure Windows" and then reboots. If it is giving me a BSOD it is happening so fast I can not see it. This is a generic PC that has been running fine for the last year. It had 22 updates to do at shutdown. Windows 7 Pro Service Pack 1 64 bit in an Active Directory Domain.

    Read the article

  • OpenVZ multiple networks on CTs

    - by user6733
    I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • Installing Bugzilla on Ubuntu 9.04 and Plesk

    - by makeflo
    Hey guys. I'm trying to install the latest Bugzilla version on my ubuntu server. (Want to use a subdomain like bugs.domain.com) I already installed all necessary perl modules and check_modules.pl doesn't show any errors. But when I'm running the testserver.pl script I get the following: TEST-OK Webserver is running under group id in $webservergroup TEST-FAILED Fetch of images/padlock.png failed I'm also not able to visit ANY file within the bugzilla folder from the browser. I'm always getting a 404 error. The bugzilla folder and all containing files are set to apache as the owner. I tried to enter the apache configuration form the installation guide in the http.include file of the domain and in the vhosts.conf file of the subdomain as well. I don't know what to do... Playing with plesks' suexecgroup doesn't bring any solution... I hope you can help me! Thanks in advance!

    Read the article

  • Mod_rewrite issue with godaddy web hosting

    - by MrFoh
    Am trying to use laravel to build a site but my routes all redirect to the homepage. Apache error logs show this AH00124: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. And the .htaccess file is this <IfModule mod_rewrite.c> Options -MultiViews Options +FollowSymLinks RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$1 [L] </IfModule> The webroot has multiple sub-folders which are document roots for different domains. Am working with one of these sub-folders. What is causing this error and how can it be fixed

    Read the article

  • Best practices in versioning

    - by Gerenuk
    I develop some scripts for data analysis in a small team. For the moment we use SVN, but not in a very structured way. We haven't even looked how to use branches even though we need this functionality. What do you suggest as the best practice to setup the following system: two code bases (core and plugins) versions can be incompatible to previous scripts sometimes individual features are being developed and not yet finished, while other fixes have to be done urgently to the code In the end we don't deliver the code as a package, but rather place the Python scripts in some directory (with version names?). Some other python script which serves as a configuration choses the desired version, sets the path to these libraries and then starts to import the modules. I saw stable releases to be named "trunk" so I did the same. However, no version numbers yet. Core and plugins are different repositories, however we have to match versions for compatibility. Can you suggest some best practices or reference to ease development and reduce chaos? :) Some suggested GIT. I haven't heard about it, but I'm free to change.

    Read the article

  • uWSGI and python virtual env

    - by user27512
    I'm trying to use uWSGI with a virtual env in order to use the Trac bug tracker on it. I've installed system-wide uwsgi via pip. Next, I've installed trac in a virtualenv $ virtualenv venv $ . venv/bin/activate $ pip install trac I've then written a simple uWSGI configuration script: [uwsgi] master = true processes = 1 socket = localhost:3032 home = /srv/http/trac/venv/ no-site = true gid = www-data uid = www-data env = TRAC_ENV=/srv/http/trac/projects/my_project module = trac.web.main:dispatch_request But when I try to launch it, it fails: $ uwsgi --http :8000 --ini /etc/uwsgi/vassals-available/my_project.ini --gid www-data --uid www-data ... Set PythonHome to /srv/http/trac/venv/ ... *** Operational MODE: single process *** ImportError: No module named trac.web.main unable to load app 0 (mountpoint='') (callable not found or import error) I think uWSGI isn't using the virtual env. When inside the virtual env, I can import trac.web.main without having an ImportError. How can I do that ? Thanks

    Read the article

  • Basic Puppet installation with Solaris 11.2 beta

    - by user13366125
    At the recent announcement we talked a lot about the Puppet integration. But how do you set it up? I want to show this in this blog entry. However this example i'm using is even useful in practice. Due to the extremely low overhead of zones i'm frequently seeing really large numbers of zones on a single system. Changing /etc/hosts or changing an SMF service property on 3 systems is not that hard. Doing it on a system with 500 zones is ... let say it diplomatic ... a job you give to someone you want to punish. Puppet can help in this case making of managing the configuration and to ease the distribution. You describe the changes you want to make in a file or set of file called manifest in the Puppet world and then roll them out to your servers, no matter if they are virtual or physical. A warning at first: Puppet is a really,really vast topic. This article is really basic and it doesn't goes more than just even toe's deep into the possibilities and capabilities of Puppet. It doesn't try to explain Puppet ... just how you get it up and running and do basic tests. There are many good books on Puppet. Please read one of them, and the concepts and the example will get much clearer immediately. (more)

    Read the article

  • How do I make YouTube videos fill up an entire screen when using dual monitors?

    - by Jephir
    I am using a dual monitor setup on Ubuntu 9.10 using the TwinView configuration in NIVIDA X Server Settings. My total resolution is 2960x1050 pixels, and my individual monitors are 1680x1050 (primary) and 1280x1024 (secondary). When going into fullscreen mode on any video on YouTube, I only see a cropped version of the video on my primary display as seen below. This does not occur on any other video sharing website - they properly make the video to fill the entire screen on my primary monitor. To my knowledge this problem only happens on YouTube.

    Read the article

  • Cannot establish ssh connection to computer on local network

    - by ovangle
    I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

    Read the article

  • How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

    - by bithacker
    I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

    Read the article

  • Invalid command 'VirtualDocumentRoot'

    - by andy
    I'm unsure as to why I'm getting the following error when apache is rebooted: Invalid command 'VirtualDocumentRoot', perhaps misspelled or defined by a module not included in the server configuration Action 'start' failed. The snippet it is referring to is this: <VirtualHost *:80> ServerAdmin [email protected] VirtualDocumentRoot /local/www/staging/%1 ServerAlias *.staging.mydomain.com </VirtualHost> I assumed it was a misspelling as it said, but it was copied directly from another server of mine. It works perfect there. Any ideas?

    Read the article

  • Help writing server script to ban IP's from a list

    - by Chev_603
    I have a VPS that I use as an openvpn and web server. For some reason, my apache log files are filled with thousands of these hack attempts: "POST /xmlrpc.php HTTP/1.0" 404 395 These attack attempts fill up 90% of my logs. I think it's a WordPress vulnerability they're looking for. Obviously they are not successful (I don't even have Wordpress on my server), but it's annoying and probably resource consuming as well. I am trying to write a bash script that will do the following: Search the apache logs and grab the offending IP's (even if they try it once), Sort them into a list with each unique IP on a seperate line, And then block them using the IP table rules. I am a bash newb, and so far my script does everything except Step 3. I can manually block the IP's, but that's tedious and besides, this is Linux and it's perfectly capable of doing it for me. I also want the script to be customizable so that I (or anyone else who wants to use it) can change the variables to suit whatever situation I/they may deal with in the future. Here is the script so far: #!/bin/bash ##IP LIST GENERATOR ##Author Chev Young ##Script to search Apache logs and list IP's based on custom filters ## ##Define our variables: DIRECT=~/Script ##Location of script&where to put results/temp files LOGFILE=/var/log/apache2/access.log ## Logfile to search for offenders TEMPLIST=xml_temp ## Temporary file name IP_LIST=ipstoban ## Name of results file FILTER1=xmlrpc ## What are we looking for? (Requests we want to ban) cd $DIRECT if [ ! -f $TEMPLIST ];then touch $TEMPLIST ##Create temp file fi cat $LOGFILE | grep $FILTER1 >> $DIRECT/$TEMPLIST ## Only interested in the IP's, so: sed -e 's/\([0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+\).*$/\1/' -e t -e d $DIRECT/$TEMPLIST | sort | uniq > $DIRECT/$IP_LIST rm $TEMPLIST ## Clean temp file echo "Done. Results located at $DIRECT/$IP_LIST" So I need help with the next part of the script, which should ban the IP's (incoming and perhaps outgoing too) from the resulting $IP_LIST file. I don't care if it utilizes UFW or IPTables directly, as long as it bans the IP's. I'd probably run it as a cron task. What I'm having trouble with is understanding how to use line of the result file as a seperate variable to do something like: ufw deny $IP1 $IP2 $IP3, ect Any ideas? Thanks.

    Read the article

< Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >